Related
Hey everybody,
my problem is I flashed my first rom, MIUI
on One X, and my sim cannot be detected.
I tried three distibutions of MIUI 3.2.22 (chinese, uk and us),
all had the same issue.
It's not a hardware problem since I went back to stock rom and it's fine.
I already posted over ot MIUI forums, no one seems to have the same issue here or there (even on different roms)
since I searched before posting
Also, I followed the steps on the rooting tutorials and maybe I'm missing something..
Following the steps I had to gather info here and there e.g. at first I didn;t wipe data before flashing,
I saw this on a youtube vid..
I used CWM, install from zip.
Any help would be appreciated!
when coming from another rom you always need to perform a full wipe.
flashed the boot.img file with fastboot from the pc to the phone ?
in recovery do :
wipe data/factory reset
wipe cache partition
ADVANCED - wipe dalvik cache
MOUNTS & STORAGE - format cache, data, system
then install the MUI.zip file......
UPDATE: Worked perfectly!
Thanks a lot!
Cool!
will try that asap.
As I said I found only bits and bytes of such tutorials,
saw a hint somewhere about boot.img
and it's the first time i read about davlik cache, mounts and storage.
Thanks a lot!
Mr Hofs said:
when coming from another rom you always need to perform a full wipe.
flashed the boot.img file with fastboot from the pc to the phone ?
in recovery do :
wipe data/factory reset
wipe cache partition
ADVANCED - wipe dalvik cache
MOUNTS & STORAGE - format cache, data, system
then install the MUI.zip file......
Click to expand...
Click to collapse
No problem mate ! .....at least one case solved tonight :good:
CASE CLOSED !
This is regarding a recently bought tablet Note 8. The current usage of /system partition is at above 75%. I have been trying to wipe/delete all system data in an attempt to have a 'fresh' OS once I install new stock ROM. In CWM recovery, I have even tried to format system partition (in addition to normal data reset, cache wipe and delvek cache wipe).
I installed the new stock ROM 4.4.2 in Download mode. Afterwards I checked and my system partition was still above 75% full. I do understand that system partition is normally read only. I am trying to work out if there is there any way where I can flash the stock ROM whilst completely removing the current system files.
Please offer any guidance or advice regarding this matter. Thanks!
Possible? Yes. Necessary? No.
The installation script for a ROM will almost always format the system partition before setting it up with the new ROM files, unless the developer is doing some special testing and you would know if that is the case.
ramjet73
Yes I think most custom ROMs would wipe system partition too. Though I want to install the stock ROM of Android 4.4.2. I have flashed the ROM about four times now, everytime trying different settings such as wipe/format system drive.
But I always end up with /system drive same size as before.
Thanks for the reply ramjet73.
S2 user said:
Yes I think most custom ROMs would wipe system partition too. Though I want to install the stock ROM of Android 4.4.2. I have flashed the ROM about four times now, everytime trying different settings such as wipe/format system drive.
But I always end up with /system drive same size as before.
Thanks for the reply ramjet73.
Click to expand...
Click to collapse
Depending on how you flash the stock ROM, Odin will flash a .img file to the system partition and completely replace its contents or an updater-script in a stock ROM zip file will format it and then copy all the included /system files to the empty partition.
In either case you cannot control what goes into the initial configuration of the system partition, only delete things that you don't need after it is flashed, unless you flash from a stock ROM zip file and delete items from that before you flash it.
There are scripting tools that can help with ROM "slimming" but I don't know if any are available for the Note 8.0 or not.
ramjet73
I know I saw this process in a recent thread but I've misplaced it. If anyone can point me to it, I would be grateful.
I want to clean flash CM 13 on my OP3.
From what I remember, I'm supposed to store the CM 13 zip file and gapps file in the SD Card folder. Is that truly correct? The OP3 doesn't have an SD Card though I did find a folder.
If I do a factory reset and wipe everything, won't that folder also get wiped? Then how would I install the ROM from the phone?
Sorry, I know this is a straightforward process for many of you, and dirty flashing is easy. But I think a clean flash is better and I'd rather not guess and end up with a bricked phone I have to fuss with.
Again, I know this exact process is in a thread somewhere but I can't find it.
the phone storage is /sdcard/
u can use something like ES File Explorer and create a folder called CM13 or whatever u want
u do have ur bootloader unlocked and twrp installed, correct?
yes u will just the get cm zip file and put it in a folder (ex. /sdcard/CM13/)
i put the gapps in the same folder
create a nandroid backup
wipe/advance wipe - wipe caches/data/system !!!!Do NOT WIPE - INTERNAL STORAGE OR OTG!!!
then flash cm zip and gapps
Hi, thank you. Yes, bootloader unlocked, twrp installed and I've done it in the past on a different phone but couldn't sort out clean flashing from dirty flashing. I've done it correctly in the past, and it's also gone very wrong for me. I think I mistakenly wiped internal storage once and that was a disaster.
Somewhere I've also read about a factory reset through trwp.
I don't need to do that, or wiping caches/data/system is the same thing?
.
digger16309 said:
Hi, thank you. Yes, bootloader unlocked, twrp installed and I've done it in the past on a different phone but couldn't sort out clean flashing from dirty flashing. I've done it correctly in the past, and it's also gone very wrong for me. I think I mistakenly wiped internal storage once and that was a disaster.
Somewhere I've also read about a factory reset through trwp.
I don't need to do that, or wiping caches/data/system is the same thing?
.
Click to expand...
Click to collapse
If you wipe internal storage, you will lose the zips for your ROM and GAPPS. You can connect your device and have it recognized on your PC from within TWRP if you do accidentally wipe your internal storage.
Factory reset doesn't wipe the system partition as that would remove your OS. Most Roms will wipe your system partition before it installs itself so generally you don't have to wipe the system partition manually, but it's good practice.
Clean flash = wipe dalvik, cache, data; then install ROM (which will wipe system before it installs, or manually wipe system before the ROM install for good measure).
Dirty flash = flash ROM, then wipe dalvik and cache. The only time you should do this if the ROM you're looking to flash says it can be done (ie. CM nightlies).
-By following this you can can increase /system space from default 800MB to 1.2GB/2GB
-You can flash gapps on CM ROMs without insufficient space issue.
-You can flash regular MIUI ROMs too,without any issue.
Statutory warning
*Repartition can kill your phone forever if anything goes wrong,so proceed with caution (and make sure you have at least 30% battery)
*This process would format your internal sdcard,backup its contents
*I'm not responsible If your phone dies during this procedure under any circumstances beyond control
Prerequisites:
1)Redmi 1s partition script_system space 1.2GB.zip/2GB.zip
2)Parted
3)Twrp v3.0.2-1.zip
4)Download and copy all these files to external sdcard
Procedure:
1)Flash Twrp recovery(incase if aren't already using it).
2)Boot in to Twrp--->Advanced--->File manager--->Browse to the location of file "parted"--->Select "parted"--->Copy File--->/sbin.
3)Now using Twrp File manager browse /sbin--->parted--->select parted--->chmod 755.
4)You can also use "aroma file manager" instead of Twrp file manager for copying "parted" to "/sbin" and changing it's permissions to 755.
5)In Twrp flash "Redmi 1s partition script_system space 1.2GB.zip/2GB.zip" and wait for the script to finish execution(recovery will reboot automatically once this process finishes).
6)In Twrp--->Wipe--->Advanced wipe--->Mark in "Dalvik/ART Cache"__"Cache"__"System"__"Data"__"Internal Storage"--->Swipe to wipe.
7)Reboot recovery.
8)Install your ROM(don't flash gapps now).
9)Back again to Twrp start screen select "Wipe"-->Advanced wipe-->select/mark "System"-->press "Repair or change file system(notice that size hasn't increased to 1.2GB/2GB)-->Resize file system.
10)Back(though size of partition appears unchanged, its actually increased to 1.2GB)-->Back>select/mark"System"-->Repair or change file system-->Notice size of partition increased.
10)Back to Twrp start screen and flash gapps,that's it.
Reset to default partition:
1)I am also giving link for flashabe script file "Reset to default partition.zip" for restoring default partition sizes.
2)Boot in to Twrp--->Advanced--->File manager--->Browse to the location of file "parted"--->Select "parted"--->Copy File--->/sbin.
3)Now using Twrp File manager browse /sbin--->parted--->select parted--->chmod 755.
4)You can also use "aroma file manager" instead of Twrp file manage for copying "parted" to "/sbin" and changing it's permissions to 755.
5)In Twrp flash "Reset to default partition.zip" and wait for the script to finish execution(recovery will reboot automatically once this process finishes).
6)In Twrp--->Wipe--->Advanced wipe--->Mark in "Dalvik/ART Cache"__"Cache"__"System"__"Data"__"Internal Storage"--->Swipe to wipe.
7)Reboot recovery.
8)that's it you are back to default partition.
PS:
1.Need for "Resizing System partition"(step 9) comes only with CM14.1(haven't tried other CM versions or other custom roms) no need to do that if you are flasing MIUI ROMs(i,e you can skip step 9 if you are flashing MIUI ROMs)
2.If you still need more System space or want to further modify partition table(only if you know what you are doing),you can edit "update-binary" file inside the zip as per your needs.
Credits:
1)forumber2_ Samsung Galaxy S III.
2)slst_for his valuable input.
3)owaisnaim & fefifofum Twrp for redmi 1s.
Downloads:
1)parted:https://drive.google.com/folderview?id=0B6_hhjS3nx4IU05yLVc2Mk9uOEk
2)Repartition script Redmi 1s_1.2GB system space:https://drive.google.com/folderview?id=0B6_hhjS3nx4IRkJFZzAtMjZEa2s
3)Repartition script Redmi 1s_2GB system space:https://drive.google.com/folderview?id=0B6_hhjS3nx4IRXlDZUU1cEJ3Smc
4)Reset to default partition:https://drive.google.com/folderview?id=0B6_hhjS3nx4IeGtXb0liazdLWVk
5)TWRP 3.0.2-1.zip:https://drive.google.com/folderview?id=0B6_hhjS3nx4IdzFHXzdfNXVCYm8
good work mate
Great tutorial! Have a some questions:
1. After successfully doing this, If I decided to full clean wipe system, data, cache, dalvik cache, internal storage, and format data, the size will be reset? Do I need to do all the steps again?
2. If I decided to go back in default partition size I just flash that to reset all the steps? Or there will be a steps to reset all I've done?
Thank you.
Sent from my HM 1SW using Tapatalk
vhick said:
Great tutorial! Have a some questions:
1. After successfully doing this, If I decided to full clean wipe system, data, cache, dalvik cache, internal storage, and format data, the size will be reset? Do I need to do all the steps again?
2. If I decided to go back in default partition size I just flash that to reset all the steps? Or there will be a steps to reset all I've done?
Thank you.
Sent from my HM 1SW using Tapatalk
Click to expand...
Click to collapse
no you just have to go to
wipe >mark on system>click repartition
go back you can see system size 1.2gb
after doing this can i flash latest twrp ?
vhick said:
Great tutorial! Have a some questions:
1. After successfully doing this, If I decided to full clean wipe system, data, cache, dalvik cache, internal storage, and format data, the size will be reset? Do I need to do all the steps again?
2. If I decided to go back in default partition size I just flash that to reset all the steps? Or there will be a steps to reset all I've done?
Thank you.
Sent from my HM 1SW using Tapatalk
Click to expand...
Click to collapse
1.You can do all the wiping as usual, size of partition wil stay as it is and won't get reset,but if you're flashing current version of cm14.1 again you need to resize "System" partition before flashing gapps.
2.You additionally need to change "System" partition too to F2FS and than to EXT4(like you do with "Data" partition),in case you're going back to default partition.
I forgot to mention point 2 in OP,I will now add this there
vinayak.ghimire said:
after doing this can i flash latest twrp ?
Click to expand...
Click to collapse
Ya you can.
and whats the size of userdata and cache partition ?
vinayak.ghimire said:
and whats the size of userdata and cache partition ?
Click to expand...
Click to collapse
Based upon the scenario, the only concern is the system partition coz newer or update partition is too large. Cache partition is ok because it only use as a temp file partition. The userdata partition is large as internal storage because it shared as the same partition. That is the good thing at xiaomi phones, data partition is large as long as you have space in internal storage.
Sent from my HM 1SW using Tapatalk
vinayak.ghimire said:
and whats the size of userdata and cache partition ?
Click to expand...
Click to collapse
Install diskinfo app and check
Thanks for the script. It will help us a lot in now and in future also.
I know, i am asking too much. I bet we all are from developers but I will be very glad if you can provide me link of flashable file of TWRP and philz recovery 6.55.
Thanks Loads.
Anyone have checked this tutorial working ??
I checked this tutorial working fine. Thanks for this awesome tip. Here the flash able zip of twrp
Here is screenshot
apoorvpandey41 said:
I checked this tutorial working fine. Thanks for this awesome tip. Here the flash able zip of twrp
Click to expand...
Click to collapse
Thanks mate appreciated.
Thanks man works perfectly fine. Awesome tutorial.
Guys please help me:
Today morning I reparationed my Redmi 1s as the Op said. it went successful. after using for 5hours I've found an update from CM. So I updated using CM UPDATER APP. after reboot I've lost my Google play store and Google app (after updating to todays CM update using CM UPDATER APP). When I went to see the system partition size, it's size went back to the default 782mb (around 782mb, I don't remember exact size).
I checked whether it is disabled or what in apps. But I can't find there also. I tried Show system apps and reset app preferences, but nothing showed them.
I tried to get them back (play store and Google app) by resizing the partition to 1.2 gb (wipe>advanced wipe> Mark system>change or resize partition>back> checked system partition size whether 1.2gb or not>wipe cache and dalvik cache> reboot to system). But nothing worked.
So please help me in getting them back. Please exclude solution such as factory reset or flash gaggs again.
Is anybody else also facing the same issue or it's just me?:crying::crying::crying:
freeshared said:
1.You can do all the wiping as usual, size of partition wil stay as it is and won't get reset,but if you're flashing current version of cm14.1 again you need to resize "System" partition before flashing gapps.
2.You additionally need to change "System" partition too to F2FS and than to EXT4(like you do with "Data" partition),in case you're going back to default partition.
I forgot to mention point 2 in OP,I will now add this there
Click to expand...
Click to collapse
please give detailed instructions to get back to default partition as i am not anymore able to flash any rom on my device. Sometimes it strucks at patching system image unconditionally and sometimes shows error 7 in twrp. And not even being able flash using adb sideload. Please give detailed instructions to revert back to default partition
sharathe100111 said:
please give detailed instructions to get back to default partition as i am not anymore able to flash any rom on my device. Sometimes it strucks at patching system image unconditionally and sometimes shows error 7 in twrp. And not even being able flash using adb sideload. Please give detailed instructions to revert back to default partition
Click to expand...
Click to collapse
1)Detailed instructions for returning back to default partitions are given in op under the sub header "PPS", nothing more to add to it,just follow as it is.
2)I myself havent faced any issues till now iam currently on cm14.1 6-12-2016 version
3)Saw your posts on cm41.1 thread too,so you're on latest twrp
but still facing error 7,If possible post a screenshot of error 7(coz it never happed for me)
4)coming to the issue at hand,could you able to mount cache,system and data partitions.In twrp go to wipe>>advanced wipe>>select "cache">>Repair/change filesystem and see if everything(regarding partition size)is ok there.
Then do same for system and data too and check how are those partitions,if possible post screenshots.
Post your relpy as soon as possible.
freeshared said:
1)Detailed instructions for returning back to default partitions are given in op under the sub header "PPS", nothing more to add to it,just follow as it is.
2)I myself havent faced any issues till now iam currently on cm14.1 6-12-2016 version
3)Saw your posts on cm41.1 thread too,so you're on latest twrp
but still facing error 7,If possible post a screenshot of error 7(coz it never happed for me)
4)coming to the issue at hand,could you able to mount cache,system and data partitions.In twrp go to wipe>>advanced wipe>>select "cache">>Repair/change filesystem and see if everything(regarding partition size)is ok there.
Then do same for system and data too and check how are those partitions,if possible post screenshots.
Post your relpy as soon as possible.
Click to expand...
Click to collapse
Thank you brother for your reply. Now i am on miui as i am not being able to go to CM14 anymore. But i can flash CM11. (it seems i can use only kitkat).
Here are the screenshots: for MOUNT, ADVANCED WIPE, CACHE, SYSTEM, DATA. And problem struck on patching system image unconditionally
Hello,
this is somewhat similar to this thread, but there are no answers and I have a bit of a different problem at the moment.
I've been using official LOS 17.1 for some time on my Note 8T, but it started to get slow, so I decided to upgrade my android version and test the latest features. I downloaded xiaomi firmware and A13 ROM, flashed them, made a full wipe and... here is where my problems started. Please don't school me here - I'm pretty sure that I messed up, I'm just looking for possible solutions.
What happened?
My phone had an encrypted data partition and as I read later, it was pretty normal that A12 installation messed it. The recovery (regardless of the version) has stopped prompting me to give the encryption password, instead it was mounting the internal drive encrypted. I tried to downgrade android version to 10 (both LOS and MIUI), but I had bootloop bringing me back to recovery. I tried decrypting it via ADB, but it didn't work. Since I need my phone, I made a backup of the whole internal storage with ADB and I have it in .img form on my hard drive. Since I've never encountered any problems like this, I wasn't prepared for losing all of my data, especially pictures and Signal archive, so I'm wondering - what can I do to try to get my data back, giving I have the full memory dump and I know the password used for en/decrypting it?
Thanks in advance, I spent hours looking for an answer, but I don't feel like getting close to the solution.
reip said:
Hello,
this is somewhat similar to this thread, but there are no answers and I have a bit of a different problem at the moment.
I've been using official LOS 17.1 for some time on my Note 8T, but it started to get slow, so I decided to upgrade my
Click to expand...
Click to collapse
Encryption is effective if you protect your phone with a password or schema etc on the lock screen.
You cannot restore data from an AOSP rom to a MIUI rom and vice versa.
The backup will only work with the same rom as the backup.
So if i have a filesystem that was encrypted on lineage os 17.1, i should make a clean install of it and then try to push the whole .img backup through adb?
reip said:
So if i have a filesystem that was encrypted on lineage os 17.1, i should make a clean install of it and then try to push the whole .img backup through adb?
Click to expand...
Click to collapse
Same rom, same password, not 100% guaranteed that it works.
reip said:
.
Click to expand...
Click to collapse
Since you have a backup try flashing DFE
let me know if it work
loopypalm said:
Since you have a backup try flashing DFE
let me know if it work
Click to expand...
Click to collapse
the problem is i pulled the whole mmcblk0 dump with adb, which gives me more than twenty partitions in the .img file (I can easily say which one is the /sdcard one because of the size) and I am not sure if pushing the whole image with incorrect rom won't bring me to the exact state i was in before. Is there a way to push a particular partition from a .img file or should i try to push everything and flash dfe, as you're saying?
reip said:
the problem is i pulled the whole mmcblk0 dump with adb, which gives me more than twenty partitions in the .img file (I can easily say which one is the /sdcard one because of the size) and I am not sure if pushing the whole image with incorrect rom won't bring me to the exact state i was in before. Is there a way to push a particular partition from a .img file or should i try to push everything and flash dfe, as you're saying?
Click to expand...
Click to collapse
if the partitions inside are .IMG file you can restore with orangefox
pick the img and set the target to restore
restore just data 1st then DFE then wipe cache+dalvik then reboot and pray
loopypalm said:
if the partitions inside are .IMG file you can restore with orangefox
pick the img and set the target to restore
restore just data 1st then DFE then wipe cache+dalvik then reboot and pray
Click to expand...
Click to collapse
This sounds like a plan, but to which partition should I flash it? I don't see 'data' option there.
+ just to make sure, do I have to reflash and set up the exact rom and password I was on when I had the encryption working before I start the operation you're suggesting?
reip said:
This sounds like a plan, but to which partition should I flash it? I don't see 'data' option there.
+ just to make sure, do I have to reflash and set up the exact rom and password I was on when I had the encryption working before I start the operation you're suggesting?
Click to expand...
Click to collapse
aah, i forgot it don't have data as target
but there must be a way using ADB
-if you are going to restore the whole backup = no need to recreate the same conditions you did before
-if you are going to restore just the userdata backup = recreate the same conditions
in both cases format DATA is important (format nt wipe then reboot to recovery)
loopypalm said:
aah, i forgot it don't have data as target
but there must be a way using ADB
-if you are going to restore the whole backup = no need to recreate the same conditions you did before
-if you are going to restore just the userdata backup = recreate the same conditions
in both cases format DATA is important (format nt wipe then reboot to recovery)
Click to expand...
Click to collapse
so format data, restore, flash DFE, reboot?
reip said:
so format data, restore, flash DFE, reboot?
Click to expand...
Click to collapse
yes