Develop Bugs

[Q] Clockworkmod xperia play

I have serached and searched. was unable to find anything so im rly sorry if i dubble post.
But will clockworkmod from Rom manager V4.5.0.1 Work on xperia play R800I
and
If im trying to flash it trough Rom manager can it cause any harm if it is not working.
i would like to avoid to flash yet another rom with Fastboot yet again if i can use a more easy on the go alternative.
Thanks in advanced.

No cwm is only supported by using dooms kernal. Wish itvwas that easy

nyvang101 said:
I have serached and searched. was unable to find anything so im rly sorry if i dubble post.
But will clockworkmod from Rom manager V4.5.0.1 Work on xperia play R800I
and
If im trying to flash it trough Rom manager can it cause any harm if it is not working.
i would like to avoid to flash yet another rom with Fastboot yet again if i can use a more easy on the go alternative.
Thanks in advanced.
Click to expand...
Click to collapse
You have two options either flash dooms kernel which comes with recovery or boot free xperia recovery (which require unlocked bootloader) both threads u can find under xperia play android development section ,pls. do some search
Sent from my R800i using xda premium

Flashtool
It would be awesome if it were that easy man, but unfortunately Flashtool is the best alternative unless your really patient

flashtool...... ?

I have a stock build on a rooted xperia play with unlocked bootloader ofc... im not too comfortable with the process of flashing new roms. i have no idear how to flash the kernal in ordre to flash cyanogenmod 7. any help doing so would be apriciated alot. thats why i asked if there where an alternative.
will something like Xcharger Reboot option be any helpfull ?

CyanogenMod 7.1 Official also includes CWM.
Installation guide:
http://wiki.cyanogenmod.com/wiki/Sony_Ericsson_Xperia_Play:_Full_Update_Guide

I like the openness of cyanogen but i like having all my playstation stuff sooo.. would it be possible to flash cwm when doing the cyanogenmod flash and then use flashtool to install stock 2.3.3 so i can backup and choose whichever one i want in the future?

thanks alot just what ive been looking for. but i have a question
i installed another stock rom on the phone version 2.3.3
Basebandversion 7x30A-AAABQMAZM-1290_21-22
and Kernalsystem 2.6.32.9-perf [email protected]#1
Will i have to install another kernal or can i just go haead and flash ?

Flashtool?

nyvang101 said:
thanks alot just what ive been looking for. but i have a question
i installed another stock rom on the phone version 2.3.3
Basebandversion 7x30A-AAABQMAZM-1290_21-22
and Kernalsystem 2.6.32.9-perf [email protected]#1
Will i have to install another kernal or can i just go haead and flash ?
Click to expand...
Click to collapse
For flashing CM you have to flash the CM kernel (boot.img) that comes in the zip package of CM , u hav to unzip the latest CM FXP package and flash boot.img through fastboot put the file boot.img in the same folder in your pc where fastboot is located and copy the CM Rom zip file on the root of your sdcard. Now connect ur phone in fastboot mode (turnoff & hold the search key while connecting to pc) check if ur phone is connected properly by entering the following command in command prompt
fastboot getvar version
if it return some value like 0.3 then ur connected correctly. Now for flashing the CM Kernel enter following command
fastboot flash boot boot.img
If all is done correctly a message will appear in command prompt stating success.Now turn on the phone while the phone is booting up press the volume rocker repeatedly until the phone enters CWM recovery mode , now install the CM Rom from ur sdcard remember to perform a nandroid backup and wipe the data/cache before installing.
Sent from my R800i using xda premium

Florenjp1 said:
Flashtool?
Click to expand...
Click to collapse
What a bright awnser but not rly usefull. toobad they did not add a Ignore button on the forum

Thank you so much... you are the best !!!!

arpit85 said:
For flashing CM you have to flash the CM kernel (boot.img) that comes in the zip package of CM , u hav to unzip the latest CM FXP package and flash boot.img through fastboot put the file boot.img in the same folder in your pc where fastboot is located and copy the CM Rom zip file on the root of your sdcard. Now connect ur phone in fastboot mode (turnoff & hold the search key while connecting to pc) check if ur phone is connected properly by entering the following command in command prompt
fastboot getvar version
if it return some value like 0.3 then ur connected correctly. Now for flashing the CM Kernel enter following command
fastboot flash boot boot.img
If all is done correctly a message will appear in command prompt stating success.Now turn on the phone while the phone is booting up press the volume rocker repeatedly until the phone enters CWM recovery mode , now install the CM Rom from ur sdcard remember to perform a nandroid backup and wipe the data/cache before installing.
Sent from my R800i using xda premium
Click to expand...
Click to collapse
Thanks alot its really helpfull. altho i cant find a Cyanogen relaser for the play anywhere on cyanogen official website will this one do ? http://forum.xda-developers.com/showthread.php?p=14815864#post14815864

nyvang101 said:
Thanks alot its really helpfull. altho i cant find a Cyanogen relaser for the play anywhere on cyanogen official website will this one do ? http://forum.xda-developers.com/showthread.php?p=14815864#post14815864
Click to expand...
Click to collapse
Yes this is correct CM package for play
Sent from my R800i using xda premium

i flashed the Cyanogenmod just to discover that i have no radio. then i downloaded the official rom. now how do i flash the official one ? is that same metod ? because its some wierd filetype *.ftf

nyvang101 said:
i flashed the Cyanogenmod just to discover that i have no radio. then i downloaded the official rom. now how do i flash the official one ? is that same metod ? because its some wierd filetype *.ftf
Click to expand...
Click to collapse
First restore ur phone to the official
firmware through nandroid restore (u had that backup right ?) then U have to use flashtool for flashing that official Rom, search for flashtool 2.9.1 beta (only this version is compatible with play not use version 3.0) u will find that in xda forums download the file and unpack on the desktop a folder flashtool will be created inside that folder look for subfolder named drivers there will be an executable file ggsetup.exe run that file to install the drivers necessary ,after that copy the firmware .ftf file in the subfolder named firmwares. Now switch off your phone but not connect to pc yet. Run flashtool.exe in that application you will find flash button click on it and then select the firmware u have downloaded to flash , now u will see several files such as adsp.sin etc show up on the right side of flashtool you have to select all those files by ctrl+a or click seperately to select all of them after you are done with it make sure you have clicked wipe data on the upper right side and then click flash now the flashtool screen will show this message - preparing files for flashing , now keep ur phone ready u have to connect ur phone only after a message showing a image of x10 popup because it has some timeout (keep the back button pressed when connecting to pc a green led should lit up on power on/off button that means u are connected in flash mode) now the flashtool should also show phone connected and it will start flashing firmware automatically. Once flashing is done turn on the phone go to settings and turn on usb debugging and unknown sources.
After that u have to repeat the process of flashing CM kernel and flashing CM through recovery described earlier.
Sent from my R800i using xda premium

arpit85 said:
First restore ur phone to the official
firmware through nandroid restore (u had that backup right ?) then U have to use flashtool for flashing that official Rom, search for flashtool 2.9.1 beta (only this version is compatible with play not use version 3.0) u will find that in xda forums download the file and unpack on the desktop a folder flashtool will be created inside that folder look for subfolder named drivers there will be an executable file ggsetup.exe run that file to install the drivers necessary ,after that copy the firmware .ftf file in the subfolder named firmwares. Now switch off your phone but not connect to pc yet. Run flashtool.exe in that application you will find flash button click on it and then select the firmware u have downloaded to flash , now u will see several files such as adsp.sin etc show up on the right side of flashtool you have to select all those files by ctrl+a or click seperately to select all of them after you are done with it make sure you have clicked wipe data on the upper right side and then click flash now the flashtool screen will show this message - preparing files for flashing , now keep ur phone ready u have to connect ur phone only after a message showing a image of x10 popup because it has some timeout (keep the back button pressed when connecting to pc a green led should lit up on power on/off button that means u are connected in flash mode) now the flashtool should also show phone connected and it will start flashing firmware automatically. Once flashing is done turn on the phone go to settings and turn on usb debugging and unknown sources.
After that u have to repeat the process of flashing CM kernel and flashing CM through recovery described earlier.
Sent from my R800i using xda premium
Click to expand...
Click to collapse
Thanks alot. Now im on Cyanogen with radio working AWESOME. time to customize.

Originally Posted by arpit85
First restore ur phone to the official
firmware through nandroid restore (u had that backup right ?) then U have to use flashtool for flashing that official Rom, search for flashtool 2.9.1 beta (only this version is compatible with play not use version 3.0) u will find that in xda forums download the file and unpack on the desktop a folder flashtool will be created inside that folder look for subfolder named drivers there will be an executable file ggsetup.exe run that file to install the drivers necessary ,after that copy the firmware .ftf file in the subfolder named firmwares. Now switch off your phone but not connect to pc yet. Run flashtool.exe in that application you will find flash button click on it and then select the firmware u have downloaded to flash , now u will see several files such as adsp.sin etc show up on the right side of flashtool you have to select all those files by ctrl+a or click seperately to select all of them after you are done with it make sure you have clicked wipe data on the upper right side and then click flash now the flashtool screen will show this message - preparing files for flashing , now keep ur phone ready u have to connect ur phone only after a message showing a image of x10 popup because it has some timeout (keep the back button pressed when connecting to pc a green led should lit up on power on/off button that means u are connected in flash mode) now the flashtool should also show phone connected and it will start flashing firmware automatically. Once flashing is done turn on the phone go to settings and turn on usb debugging and unknown sources.
After that u have to repeat the process of flashing CM kernel and flashing CM through recovery described earlier.
Sent from my R800i using xda premium
Click to expand...
Click to collapse
Thanks alot. Now im on Cyanogen with radio working AWESOME. time to customize.
Click to expand...
Click to collapse
Congrats... Enjoy playing with ur play (even I not had that luck flashing because I had some pc problems here,still stuck on stock 3.0.1.A.145) once had CM but without radio...
Sent from my R800i using xda premium

[Q] relock bootloader for Xperia s

I want to relock my bootloader for official jelly bean update on PC.........please help me

ishu87scorpion said:
I want to relock my bootloader for official jelly bean update on PC.........please help me
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1527159
Please don't create a new thread.. Search first and then read.. Read and read more..

The link provided for Xperia-S_Relock_bootloader.ftf is dead. If someone has the file and would be so kind as to mirror it it would be awesome. I would have posted on the original thread, but it's in the developer section and I am not allowed to post there. I have tried google search to find an alternative and I have come across one file with the same name, I flashed it with Flashtool and now my Xperia S won't boot, I can get into flashmode and fastboot but that's it.

queloo said:
The link provided for Xperia-S_Relock_bootloader.ftf is dead. If someone has the file and would be so kind as to mirror it it would be awesome. I would have posted on the original thread, but it's in the developer section and I am not allowed to post there. I have tried google search to find an alternative and I have come across one file with the same name, I flashed it with Flashtool and now my Xperia S won't boot, I can get into flashmode and fastboot but that's it.
Click to expand...
Click to collapse
I have also faced the same problem and finally got the solution............
1. Just download the flash tool from here............
http://androxyde.github.io/index.html?1367093576000
2. Download latest Firmware from here..........
http://forum.xda-developers.com/showpost.php?p=24844165&postcount=2
3. And follow this steps...........
>DO NOT CONNECT YOUR PHONE
>First you need to have FLASH TOOL installed from above 1 no. link
Now run FLASHTOOL.
>From FLASHTOOL home, select the flash/lightning bolt button
>Select FLASH MODE
>Select your stock firmware file (.ftf file wich downloaded from 2 no. link)
>WIPE: everything
>If available EXCLUDE: TA. (this option is not available for all stock.ftf files, if it's there just exclude it)
>Now click START button
>After FLASHTOOL prepares files, you should get this screen (or similar depending on version of FLASHTOOL)
>Now connect your phone with Volume key down (-). Flash mode and green LED will blink.
> Now flashing will start.............
>After all activity will done than start your phone and enjoy......
If u need any assistance just post here............

ishu87scorpion said:
I have also faced the same problem and finally got the solution............
1. Just download the flash tool from here............
http://androxyde.github.io/index.html?1367093576000
2. Download latest Firmware from here..........
http://forum.xda-developers.com/showpost.php?p=24844165&postcount=2
3. And follow this steps...........
>DO NOT CONNECT YOUR PHONE
>First you need to have FLASH TOOL installed from above 1 no. link
Now run FLASHTOOL.
>From FLASHTOOL home, select the flash/lightning bolt button
>Select FLASH MODE
>Select your stock firmware file (.ftf file wich downloaded from 2 no. link)
>WIPE: everything
>If available EXCLUDE: TA. (this option is not available for all stock.ftf files, if it's there just exclude it)
>Now click START button
>After FLASHTOOL prepares files, you should get this screen (or similar depending on version of FLASHTOOL)
>Now connect your phone with Volume key down (-). Flash mode and green LED will blink.
> Now flashing will start.............
>After all activity will done than start your phone and enjoy......
If u need any assistance just post here............
Click to expand...
Click to collapse
Thank you very much. This worked. I didn't know flashing a stock .ftf firmware would re-lock my bootloader. It did I flashed LT26i_6.1.A.2.50_1257-5499_WORLD and after that was able to upgrade through PC-companion without any problems. Thank you for the help.

ishu87scorpion said:
I have also faced the same problem and finally got the solution............
1. Just download the flash tool from here............
http://androxyde.github.io/index.html?1367093576000
2. Download latest Firmware from here..........
http://forum.xda-developers.com/showpost.php?p=24844165&postcount=2
3. And follow this steps...........
>DO NOT CONNECT YOUR PHONE
>First you need to have FLASH TOOL installed from above 1 no. link
Now run FLASHTOOL.
>From FLASHTOOL home, select the flash/lightning bolt button
>Select FLASH MODE
>Select your stock firmware file (.ftf file wich downloaded from 2 no. link)
>WIPE: everything
>If available EXCLUDE: TA. (this option is not available for all stock.ftf files, if it's there just exclude it)
>Now click START button
>After FLASHTOOL prepares files, you should get this screen (or similar depending on version of FLASHTOOL)
>Now connect your phone with Volume key down (-). Flash mode and green LED will blink.
> Now flashing will start.............
>After all activity will done than start your phone and enjoy......
If u need any assistance just post here............
Click to expand...
Click to collapse
i flashed LT26i_6.2.B.0.200_WORLD.ftf firmware but i am not able to upgrade through PC-companion or directly from the phone
please help

[Q] My computer cannot recognize this sony xperia arc, trying to flash stock rom on ?

i have this sony xperia arc which got stuck at sony logo. I already download all necessary files for flashing and ftf files. Issue i am having right now i cannot connect this phone with my computer, i have downloaded sony arc drivers in the computer but in order to install them i still cannot see this device in my device manager.
i tried to do all hard reset methods too but none of them worked , tried all possible ways to hard reset
tried back+menu and power
tried home + volume up + power
home + volume down+ power
if anybody knows any other way to do hard reset please let me know
just want to mention i have downloaded flashtools, ftf files please let me know how can i make it visible on my computer

What version of Windows are you using?
僕のLT18iから送られてきた

popthosegaskets said:
What version of Windows are you using?
僕のLT18iから送られてきた
Click to expand...
Click to collapse
sorry for duplicate thread, had some internet issues ,
I am using windows 7

bindudhindsa said:
sorry for duplicate thread, had some internet issues ,
I am using windows 7
Click to expand...
Click to collapse
Ok. I assume you installed Flashtool. Did you install the drivers and put the FTF files in the firmware folder in the Flashtool directory?
僕のLT18iから送られてきた

yes i installed flastool and add ftf files in the firmware folder. but when i open flashtool i cannot see anything on left side menu as described in the procedure.

bindudhindsa said:
yes i installed flastool and add ftf files in the firmware folder. but when i open flashtool i cannot see anything on left side menu as described in the procedure.
Click to expand...
Click to collapse
There should be a button with a lighting symbol. Click on it and select flash mode. Select FTF and the program will do it from there onwards. Just follow the instructions.
僕のLT18iから送られてきた

popthosegaskets said:
There should be a button with a lighting symbol. Click on it and select flash mode. Select FTF and the program will do it from there onwards. Just follow the instructions.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
Thanks a lot for all your help friends who watched and helped me in this thread, just want to share my experience with other so if anybody have same problem they can do it
1) Download flashtool, on sony website they told us to download emma software but did not work out for me so i downloaded flashtool directly here from this link
http://forum.xda-developers.com/show....php?t=2335555 (plz check this link twice, dont remember from where i downloaded flashtool software could be this one , sorry googled lot of links for this software
2) download ftf file from this link
http://forum.xda-developers.com/show....php?t=1681542
3) flashtool will go directly to C drive which must be your main drive
4) go to c:/flashtool/firmware and delete anything you have in there
5) when its empty copy ftf file from step 2 and paste it in here
6) open flashtool, click on bolt sign and select this ftf file
7) take out battery of phone, put charger in phone and press back button to enter in flash mode
8) press flash on flashtool software and wait for completion of process
ALL DONE ...

Flashtool freezes when creating bundle (ftf)

Anyone else had the same problem? Window just freezes and nothing happens. Is there any other way to get official firmware in .ftf format?

http://imgur.com/a/9KLdq
I'm doing something wrong or what?
Is there any way to install dstrikerz1's rom without downgrading?

Analala said:
http://imgur.com/a/9KLdq
I'm doing something wrong or what?
Is there any way to install dstrikerz1's rom without downgrading?
Click to expand...
Click to collapse
You need only recovery to flash Dstriker, no need to downgraded. Root with Kingroot, flash dual recover by nut, then flash rom...

levone1 said:
You need only recovery to flash Dstriker, no need to downgraded. Root with Kingroot, flash dual recover by nut, then flash rom...
Click to expand...
Click to collapse
Problem is I really want to avoid kingroot. I installed it once and then had to re-flash system again because it couldn't be uninstalled. And I don't trust Chinese proprietary software.

Analala said:
Problem is I really want to avoid kingroot. I installed it once and then had to re-flash system again because it couldn't be uninstalled. And I don't trust Chinese proprietary software.
Click to expand...
Click to collapse
If you're wanting to flash Dstriker, then you're going to reflash system anyway, just make sure to check box for 'system' when wiping in recovery...
If you really want to downgrade and root, try a newer version of Flashtool. New versions create the whole ftf just by downloading. All you have to do is wait until it's done, and click flash.

levone1 said:
If you're wanting to flash Dstriker, then you're going to reflash system anyway, just make sure to check box for 'system' when wiping in recovery...
If you really want to downgrade and root, try a newer version of Flashtool. New versions create the whole ftf just by downloading. All you have to do is wait until it's done, and click flash.
Click to expand...
Click to collapse
I tried downloading different firmware version on a different computer but i still get program freeze when i tried to bundle it. If i try to flash downloaded firmware then firmware selector cant find it either. See for yourself - http://imgur.com/r61Rr7m http://imgur.com/36nbNG7

Analala said:
I tried downloading different firmware version on a different computer but i still get program freeze when i tried to bundle it. If i try to flash downloaded firmware then firmware selector cant find it either. See for yourself - http://imgur.com/r61Rr7m http://imgur.com/36nbNG7
Click to expand...
Click to collapse
I'm not a Flashtool expert, but I've flashed roms at least a dozen times, and I don't even see that screen anymore. I remember in older versions you used to have to download and then create an ftf, bit about a year ago there was an update where FT and Xperifirm were able to work together, and the flashable ftf was created automatically. Ever since then, I just click on the firmware I want in Xperifirm, and it downloads, and prepares the file, and I just click 'flash' and connect the phone and it's done.

levone1 said:
I'm not a Flashtool expert, but I've flashed roms at least a dozen times, and I don't even see that screen anymore. I remember in older versions you used to have to download and then create an ftf, bit about a year ago there was an update where FT and Xperifirm were able to work together, and the flashable ftf was created automatically. Ever since then, I just click on the firmware I want in Xperifirm, and it downloads, and prepares the file, and I just click 'flash' and connect the phone and it's done.
Click to expand...
Click to collapse
Maybe its in the latest update. The problem is I get an error when trying to launch x10flasher.jar. I have no idea what could have caused this problem. I got freshly installed java so everything should be fine.
http://imgur.com/a/0oOwz

1. Download Flashtool 0.9.23.1 and install it
2. Download x10flasher.jar from the same page
3. Open folder where you just installed Flashtool, and simply paste x10flasher.jar
4. Move and replace - YES
that's how you upgrade to 0.9.23.2
As for making ftf files:
1. when you have Flashtool, open XperiFirm from there, as picture attached
2. when firmware of your choosing finished downloading close XperiFirm windows (red markers in attached pic) but dont close little window in Flashtool (green "circle" in attached pic)
3. after few seconds Flashtool starts creating FTF version of the firmware you downloaded via XperiFirm
4. when progress bar finishes you have your firmware avaible to flash via "lighting icon" in flashtool

Aculard said:
1. Download Flashtool 0.9.23.1 and install it
2. Download x10flasher.jar from the same page
3. Open folder where you just installed Flashtool, and simply paste x10flasher.jar
4. Move and replace - YES
that's how you upgrade to 0.9.23.2
As for making ftf files:
1. when you have Flashtool, open XperiFirm from there, as picture attached
2. when firmware of your choosing finished downloading close XperiFirm windows (red markers in attached pic) but dont close little window in Flashtool (green "circle" in attached pic)
3. after few seconds Flashtool starts creating FTF version of the firmware you downloaded via XperiFirm
4. when progress bar finishes you have your firmware avaible to flash via "lighting icon" in flashtool
Click to expand...
Click to collapse
Thanks fam! I thought x10flasher.jar was some kind of executable installer. Now everything works .

Me too , i thought x10flasher.jar is for Xperia X10 phones ... Problem solved , bundle created successfully .
Thanks to Aculard ...

Aculard said:
1. Download Flashtool 0.9.23.1 and install it
2. Download x10flasher.jar from the same page
3. Open folder where you just installed Flashtool, and simply paste x10flasher.jar
4. Move and replace - YES
that's how you upgrade to 0.9.23.2
As for making ftf files:
1. when you have Flashtool, open XperiFirm from there, as picture attached
2. when firmware of your choosing finished downloading close XperiFirm windows (red markers in attached pic) but dont close little window in Flashtool (green "circle" in attached pic)
3. after few seconds Flashtool starts creating FTF version of the firmware you downloaded via XperiFirm
4. when progress bar finishes you have your firmware avaible to flash via "lighting icon" in flashtool
Click to expand...
Click to collapse
Please could inform why Flashtool not showing FTF files after I Download it
also it's in Firmware folder

Thanks Mate

Thanks a lot to mate recomended jar update.
This forum not granted me quote.
I have the same issue between gentoo nor W10.
Regards.

Thanks so much for your solution. I have replaced the x10flasher.jar and it is working really good. Thanks again.

aculard said:
1. Download flashtool 0.9.23.1 and install it
2. Download x10flasher.jar from the same page
3. Open folder where you just installed flashtool, and simply paste x10flasher.jar
4. Move and replace - yes
that's how you upgrade to 0.9.23.2
as for making ftf files:
1. When you have flashtool, open xperifirm from there, as picture attached
2. When firmware of your choosing finished downloading close xperifirm windows (red markers in attached pic) but dont close little window in flashtool (green "circle" in attached pic)
3. After few seconds flashtool starts creating ftf version of the firmware you downloaded via xperifirm
4. When progress bar finishes you have your firmware avaible to flash via "lighting icon" in flashtool
Click to expand...
Click to collapse
thank you so much ive been trying to do this for so long

Thank you,
Aculard said:
1. Download Flashtool 0.9.23.1 and install it
2. Download x10flasher.jar from the same page
3. Open folder where you just installed Flashtool, and simply paste x10flasher.jar
4. Move and replace - YES
that's how you upgrade to 0.9.23.2
As for making ftf files:
1. when you have Flashtool, open XperiFirm from there, as picture attached
2. when firmware of your choosing finished downloading close XperiFirm windows (red markers in attached pic) but dont close little window in Flashtool (green "circle" in attached pic)
3. after few seconds Flashtool starts creating FTF version of the firmware you downloaded via XperiFirm
4. when progress bar finishes you have your firmware avaible to flash via "lighting icon" in flashtool
Click to expand...
Click to collapse

No operating system

I opened the phone, and with recovery accidently deleted android.
Now the phone has no operating system and it stops on the white Sony logo.
Cant flash android as flashtool doesnt recognise the device. Also Sony EMMA doesnt recognise the device.
Is there something I can do to flash android again?

You still should be able to boot into Flashmode.
Download this: http://www108.zippyshare.com/v/zCWNOyLT/file.html
Put it in Flashtool\devices.
Inside are modded XA1 files to match XA1 Ultra. With that You can create and flash* .ftfs.
That way I create ftfs for users of my polish forum about Xperias: http://www.xperiasite.pl/forum/396-xperia-xa1-ultra/
*Don't have XA1 Ultra, but simulations gave no errors and there is no complains from users.

Thanks
But i cant download the files ad i cant register to your site in polish.
Can you send ne another link to your files?
I have a G3221 version

Here You have all firmwares fo XA1u I created: https://www.androidfilehost.com/?w=files&flid=201573
On that forum are additionally links to GDrive and MEGA.
Not sure where to upload that Flashtool files, never had problem with Zippy.
EDIT: Here GDrive link: https://drive.google.com/open?id=0B7UqjtcLWyHOMDhGTjlJLW15TlE

Thanks
Firgett my last post, i managed to download both fules.
Will let you know if i managed to flash the device.
Thanks again

Thanks for your help
I download all the files
Put the first file in the flashtool/devices
Put the firmware in flashtool/firmwares
Also, i have the last version of flashtool.
But still flashtool dont recognise the device and not the firmware...
Can you tell me what can i do?

Not sure. Did You put G32XX folder into Flashtool/devices folder and .ftf into /firmwares?
Don't have he device, but at least firmware and unknown device in flashmode should be seen by Flashtool.

In the newest version of flashtool it doesnt recognise the firmware.
I did install an old version of flashtool and it did recognize the firmware, but still could not flash it...

Any error? Maybe it can be bypassed.

I use now flashtool version 0.9.22.3
It recognise the device
It also recognise the firmware.
With your firmware it flash with no errors and in the end it is saying ''Please unplug and start your phone''
But the phone still stuck on the SONY white screen.
I tried fkashing other firmwares but there is an error like ''can read only 55000 bites instead of 60000'' and then the flash is aborted...
Very strange...

Hello im trying to flash stock firmware in my G3223 but nothing detect the firmware. Please let me know. Thanks