I am flashing wrong ROM on my redmi 1s .my phone was not able to switch on ,not charging, no bootloader,no fastboot mode totally crashed. I pressed volup+power,voldown+power not going to any mode.When I connected to PC,it recognized Qualcomm qdloader driver. I am flash to ROM with mi flash tool it recognised COM10 PORT When I flash official stock ROM I got error not flashing.is there any way to flash ROM on my device.I am searched on google I found Qualcomm flash tool,how to flash ROM with Qualcomm flash tool pls help me
naveen3186 said:
I am flashing wrong ROM on my redmi 1s .my phone was not able to switch on ,not charging, no bootloader,no fastboot mode totally crashed. I pressed volup+power,voldown+power not going to any mode.When I connected to PC,it recognized Qualcomm qdloader driver. I am flash to ROM with mi flash tool it recognised COM10 PORT When I flash official stock ROM I got error not flashing.is there any way to flash ROM on my device.I am searched on google I found Qualcomm flash tool,how to flash ROM with Qualcomm flash tool pls help me
Click to expand...
Click to collapse
Man, you are not the only one in this situation, I accidentally erased the f*cking 'tz' partition. If you are on linux, connect the phone to USB, the preloader will find that the whole of the data is messed up and put the phone into bulk mode. In bulk mode, the partitions of the phone is exposed as such so you can copy files into it. DONT DO IT WITHOUT RESEARCH. BUT I AM NOT SURE HOW TO RESTORE IT. If I get tz.img instead of tz.mbn, I will be able to 'dd' it. I dont think I can 'dd' a mbn file.
..
generex144 said:
Man, you are not the only one in this situation, I accidentally erased the f*cking 'tz' partition. If you are on linux, connect the phone to USB, the preloader will find that the whole of the data is messed up and put the phone into bulk mode. In bulk mode, the partitions of the phone is exposed as such so you can copy files into it. DONT DO IT WITHOUT RESEARCH. BUT I AM NOT SURE HOW TO RESTORE IT. If I get tz.img instead of tz.mbn, I will be able to 'dd' it. I dont think I can 'dd' a mbn file.
Click to expand...
Click to collapse
MIflash actually works , just b on new miflash version(which capable of switch 9008-9006 mode)...
it may gives errors many times...
tips to b successfull flash..
1. charge battery with external charger (most imp. )
2.if ur using pc, connect usb to motherboard usb port.( backside ports of cabinet)
3.try changing usb cables (sounds stupid but actually worked for me, as phone wont stay in 9006/9008 mode if usb signal drop)
dd wont work until u have access to fastboot/adb..
another way is make deep flash cable..
dnt wrry its very easy
Related
I keep changing roms since long time before on my oneplus devices, i bought asus zenfone 2 and tried to root the phone, it got bricked and i unbricked successfully by using xFSTK tool. device turned on like before but unable to connect to pc, even when MTP is selected it just starts charging when i connect it to pc, even tried with different types of cables still the same issue. tried in recovery and fastboot as well.
at least if it would work in fastboot then i can install twrp and add custom rom. not even able to do that.
P.S - tried even installing adb, intel drivers. problem doesn't seem to be going..
PLEASE HELP.
deejaysandee143 said:
I keep changing roms since long time before on my oneplus devices, i bought asus zenfone 2 and tried to root the phone, it got bricked and i unbricked successfully by using xFSTK tool. device turned on like before but unable to connect to pc, even when MTP is selected it just starts charging when i connect it to pc, even tried with different types of cables still the same issue. tried in recovery and fastboot as well.
at least if it would work in fastboot then i can install twrp and add custom rom. not even able to do that.
P.S - tried even installing adb, intel drivers. problem doesn't seem to be going..
PLEASE HELP.
Click to expand...
Click to collapse
flash latest Raw firmware with asus flash tool. get it from following thread.
http://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
sukhwant717 said:
flash latest Raw firmware with asus flash tool. get it from following thread.
http://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
Click to expand...
Click to collapse
Brother, after completing this process only i am facing this issue..
unable to connect my phone in any mode. not even to other pc.
Fast charging works?
There may be a problem with the flex cable that has the sim + sd slots on it. Costs 3$ on ebay and its very easy to replace.
pecholino said:
Fast charging works?
There may be a problem with the flex cable that has the sim + sd slots on it. Costs 3$ on ebay and its very easy to replace.
Click to expand...
Click to collapse
No, fast charging was not working after the process in xFSTK tool. it would take around 8 hours to get 100 %
deejaysandee143 said:
Brother, after completing this process only i am facing this issue..
unable to connect my phone in any mode. not even to other pc.
Click to expand...
Click to collapse
i said flash raw firmware again.. you will overcome the issue! which version you are currently on?
sukhwant717 said:
i said flash raw firmware again.. you will overcome the issue! which version you are currently on?
Click to expand...
Click to collapse
The phone doesn't boots normally, and neither connects in fastboot nor in recovery. only shows error. its version 5
deejaysandee143 said:
The phone doesn't boots normally, and neither connects in fastboot nor in recovery. only shows error. its version 5
Click to expand...
Click to collapse
then you have to use xfstk again..you can not do anything until you are able to go into fastboot mode. flash xfstk again and again until you enter fastboot mode
sukhwant717 said:
then you have to use xfstk again..you can not do anything until you are able to go into fastboot mode. flash xfstk again and again until you enter fastboot mode
Click to expand...
Click to collapse
I can enter only in fastboot mode but fastboot wont be detected in adb, as i mentioned it's not getting recognized..
Well I am having the same simptoms since the sdcard slot got burned. No fast charging and no pc recognition. I am currently waiting for the flex cable so I can fix it
Hello sirs, I hope you can help me.
I have a mi6 that turned into a brick. Hold the buttons to it to give restart / download mode or put it to load. He does not respond to anything.
However,
By putting it on your computer it recognizes you as Qualcomm QDLoader 9008.
I wonder if I can recover it yet. or unfortunately it turned a paper weight.
DL Xiaomi flash tool and flash fastboot rom. It will be fine.
icrunchbanger said:
DL Xiaomi flash tool and flash fastboot rom. It will be fine.
Click to expand...
Click to collapse
I tried to do this form, downloaded all the miui site drivers, adb fastboot and cualcomm driver.
How to run my flash with a last method with the xiaomi global mi6 I got the following error:
"Cannot receive hello packet Xiaomi Device"
The program tried a few more times and nothing more.
What can I be doing wrong? Do you have another option? because he is in what they call DeadBrick (I discovered this term only now, after searching the forums)
XeeXa said:
I tried to do this form, downloaded all the miui site drivers, adb fastboot and cualcomm driver.
How to run my flash with a last method with the xiaomi global mi6 I got the following error:
"Cannot receive hello packet Xiaomi Device"
The program tried a few more times and nothing more.
What can I be doing wrong? Do you have another option? because he is in what they call DeadBrick (I discovered this term only now, after searching the forums)
Click to expand...
Click to collapse
I know, i was there. Reboot your computer and start again.
I restarted and tried again.
I formatted and installed only the drivers and the error continues.
I tried with miflash 2015 until version miflash2017
I think, you device isn't in EDL mode. You open back cover of device. Make test point for QDL 9008. Then, you flash fastboot rom by Mi flash tool. It's very simply. I made it for unbrick my Mi6 several times.
See video here.
https://youtu.be/vSNRQdUuNYw
bahuy2003 said:
I think, you device isn't in EDL mode. You open back cover of device. Make test point for QDL 9008. Then, you flash fastboot rom by Mi flash tool. It's very simply. I made it for unbrick my Mi6 several times.
See video here.
Click to expand...
Click to collapse
Is this the only way to put the phone in edl mode?
Yes, it's only way for Mi6, which is locked bootloader.
I don't know how this happened, I tried to update to MIUI 10 and now TWRP says I don't have an OS and fastboot just boots on & off, on & off for eternity.
How can I reset it? When I tried updating with TWRP I got some weird error and now this happened. Is it possible to do an ordinary factory reset from TWRP or fastboot? Also, I can't plug my Xiaomi MI6 into the computer with USB-C. Some time ago I dropped it with headphones connected to the USB-C and the connection ONLY works for charging. Headphones don't work, and I don't think it works on the PC either. UNLESS, there's so program I need for the computer to connect to the Xiaomi, but plugging it in to the PC it doesn't react or the computer says it doesn't know what it is.
download fastboot rom, and flash it with mi flash.
zilan said:
download fastboot rom, and flash it with mi flash.
Click to expand...
Click to collapse
Hi! I have the Mi Flash program, but when I connect my Xiaomi MI 6 to the computer, my computer keeps saying it doesn't recognize the device and I can't refresh in Mi Flash to find my phone
Bump.
Well I could not wait anymore, I bought a new phone but I still wanna try fix this phone to sell it.
Is this forum dead?
Similar problem here. Help guys!
Download a custom ROM and put it into a flash or sd card then connect it to your device through OTG and wipe system vendor cash data but DO NOT WIPE INTERNAL STORAGE, then just flash the rom and reboot .
Last time i flashed ThE stock ROM via mi flash tool i lost energy on my pc so prosess ended un error. My phone was in fastboot but i rebooted and never turns on again. I cant get fastboot mide anymore. Adb not recognice it but i can see it on PC in device mánager as "gualcomm HS-USB diagnostics 900E (COM3)
Any help?
MaxxTwo said:
Last time i flashed ThE stock ROM via mi flash tool i lost energy on my pc so prosess ended un error. My phone was in fastboot but i rebooted and never turns on again. I cant get fastboot mide anymore. Adb not recognice it but i can see it on PC in device mánager as "gualcomm HS-USB diagnostics 900E (COM3)
Any help?[/QUOTE
Just go to fastboot mode and type: "fastboot oem edl"
If you can´t enter fastboot, you have to open your phone and connect both testpoints
it's all on xda questions and anwsers mi A2 lite
Click to expand...
Click to collapse
Nxkealen said:
MaxxTwo said:
Last time i flashed ThE stock ROM via mi flash tool i lost energy on my pc so prosess ended un error. My phone was in fastboot but i rebooted and never turns on again. I cant get fastboot mide anymore. Adb not recognice it but i can see it on PC in device mánager as "gualcomm HS-USB diagnostics 900E (COM3)
Any help?[/QUOTE
Just go to fastboot mode and type: "fastboot oem edl"
If you can´t enter fastboot, you have to open your phone and connect both testpoints
it's all on xda questions and anwsers mi A2 lite
Click to expand...
Click to collapse
Thanks! But its in indi, can not undetstand nothing XD
Click to expand...
Click to collapse
https://redirect.viglink.com/?key=e...ter-t3862648/amp/&ref=https://www.google.com/
1- install mi flash tool and Qualcomm driver on your Pc
2- open the phone (just remove the battery connector )
3-plug a USB cable in the device
4- short the jtag pins(you can find their location in this page www mobilerdx com/2018/09/xiaomi-redmi-6-pro-test-point-boot-into-edl-9008-mode.html
7-plug the USB cable in the Pc while shortening the pins
If you do these steps mi flash tool should reconize your device and you will be able to flash it
Thanks man! My phone is working properly again. Let me tell my story in this.
Never opened a device before this. So I decided to take it to the official service. Unfortunately they told me that the mother board was damaged and the cost to REPLACE it is the same as buy a new phone!
So I been forced to try fix it by my self.
A couple of latex gloves XD and don't ask how I did to short the points but it works...
Now I'm using my Daisy again and waiting for official Android Q !!!
Hello ,
I am realative newbie at upgrading roms ,even though I've been doing it for few years.
I got the latest twrp onto my device ,but somehow couldn't get a rom from recovery onto the device and whatever I did
Now my device is not showing on ADB ,as far as I can see I don't even have a bootloader on it anymore.
I've managed to open it up and get EDL working and the device is showing up on COM9 . Mi flash only lists the device under com and not under recovery.
Is there anything I can do to salvage ,
Thanks in advance.
Hello,
you can try to use an USB-OTG adapter to flash an image from a USB pen drive. Of course you SHOULD try to avoid use MIflash and use a adb and fastboot tools from a Linux computer. Test if it works properly or not the detection of the device. If not... maybe you burnt the usb chargingboard like happened to me( a tip to recognize this: it won't fast charge) , so the fix will be to replace the board.