Hi guys,
I need your help. Yesterday i tried to install flash my stock firmware (S054) in my Lenovo VIBE K5 Plus A6020a46. Now it seems Bricked. I can't boot into fastboot mode and not into the recovery mode. When I tried to turn on nothing will happen its just show black screen. When I connect with pc its automatically connect on download mode and shows (Qualcomm HS-USB QLoader 9008 Com 3)Successfully installed but when i am tried to flash with "QFIL (Shows sahara error) or QcomDLoader (Shows Send Result and in progress and nothig will happend)" What should I do? Please help. :crying:
Try
Maybe this link can help you
forum.gsmdevelopers.com/showthread.php?t=26402
Related
hello All
i did something very very very bad
i was upon to downgrade my D855 from 5.0 to Kitkat but it stop on 17% in pc and 0% on the phone
it still like that for 40 min so i unplug USB and i restart the phone i just get message says (secure booting error) in the up left side of phone and after that black screen and LED (BLUE & RED) i can not get in to download mode but when i try i get this :
Qualcomm HS-USB QDLoader 9008 (COM41)
and when i try to enter to recovery mode i get had to do factory reset and same problem !
so anyone can help me with this ?
Thanks ..
any help plz
Hello.
Move your battery, then replace it.
Flash an official kdz from lg.com with LGflashTool and your phone will restart
Your device is Brick!!
Try to enter Download mode
Flash your device again with LG FLash tools(tot File) or KDZ
i found it holllllaaa
for everyone have this problem, on this link you can fix it
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
i used KIZ file by the way
and i wish frm supervisor to close this subject and write solved on it
thanks.
Hi,
so i recently got a bootlopping LG G3. My first thought was to just flash a stock rom - So i did. But as LGFT was flashing the USB cable accidentally plugged out and now i'm stuck at
Code:
"[[XXXX] Secure booting error" (XXXX changes with every restart)
and a blue/red blinking LED. I can't even access the downloadmode anymore.
My computer doesn't recognize the phone. No entry in device manager. No Qualcomm HS-USB QDLoader entry... Just nothing.
I don't know what to do now and I don't want to throw the phone away Do you have any solution? Thanks in advice!
Regards,
furi
Help pl0x? :c
help me please,
lg g3 no download mode or recovery or fastboot
hi everyone, please help me to fix this lg g3
the problem is, my device has detected in device manager as qualcomm hs usb 9008
from the boarddiag, it show that my ap test, emmc, and sdram pass or in good condition
i have using boarddiag to flash aboot,primarygpt, laf etc,
the problem is after flash that thing, i still can't enter download mode, even i press vol up while insert usb cable to pc, my device still don't enter download mode, just LG logo and black screen and turn to qualcomm hs usb 9008 again, why ???
for information,
before this brick i use marshmallow, or i must use the laf of marshmallow again? because i use laf kitkat rom, 10e, if that so can you share laf.mbn from marshmallow v30b? i have laf.img from 30b but the problem i can't enter the fastboot mode to flash it
full chronology
before brick my phone is on marshmallow 30b, then my phone suddenly stuck at LG logo and don't enter the OS, after that i flash via KDZ, but stuck at 99% and i just unplug from pc, after pulled battery and connect to pc it blank and show lge androidnet serialport, then i short pin/ test point and become detect as qualcomm hs-usb 9008, after that i flash aboot, primarygpt, laf, tz , etc via boarddiag, it's successfully, but i still don't enter download mode, it just show LG logo for a moment then black lcd, and detect as qualcomm again
for information:
condition i don't root phone, and now don't enter download mode, fastboot or recovery.
please i will pay who can revive my lg g3
If your phone is furbished, you have to confirm your. Model by opening and looking at the board.
You are flashing 855 firmware but that might be any other model.
I have a lenovo vibe k5 plus smartphone, which i erased accidentally, complete emmc erased. Now my phone won't start. It is neither booted into fastboot nor adb, not even recovery. When i plug it into my PC, red LED is on and it is automatically detected as Qualcomm HS-USB QDLoader 9008. I have tried qfil, Tool studio, QDloader, and even Miflash,but nothing worked.
Qfil says: QSahara error,
Tool studio: MPRG.mbn download failed,
QDLoader: send result,
Miflash: Reached end packet, can not receive hello packet.
if anyone can help me please tell me a proper way to recover/unbrick my phone Thanks in advance.
sahirali920 said:
I have a lenovo vibe k5 plus smartphone, which i erased accidentally, complete emmc erased. Now my phone won't start. It is neither booted into fastboot nor adb, not even recovery. When i plug it into my PC, red LED is on and it is automatically detected as Qualcomm HS-USB QDLoader 9008. I have tried qfil, Tool studio, QDloader, and even Miflash,but nothing worked.
Qfil says: QSahara error,
Tool studio: MPRG.mbn download failed,
QDLoader: send result,
Miflash: Reached end packet, can not receive hello packet.
if anyone can help me please tell me a proper way to recover/unbrick my phone Thanks in advance.
Click to expand...
Click to collapse
Perdonnaly I would suggest QFil :
- remove the battery
- put it back
- push volume + and - and plug your phone at the same time
- be careful to use qpst 2.7.430 (you can find it on other threads)
Sent from my Lenovo Vibe K5 Plus using XDA Labs
I have tried qfil of qpst 2.7.422, 2.7.430, 2.7.437 and 2.7.472 but nothing worked.
Hey everyone
My LG G4 (H815) suddenly turned off when i was using it, and it showed no life when i tried to boot it up again. Its completely stock, no custom recovery or custom firmware is installed. I cant boot into fastboot or EDL mode. I tried the button combinations as well as the test point method but i just cant get it to enter any kind of recovery mode, the screen just remains black (no backlight either). I installed the Qualcomm HS-USB drivers and when i plug my phone in my pc it gets recognized by QFIL. I tried flashing the fimware but it always gives me the Sahara unable to read packet header error. Can anyone help me?
Thanks in advance.
Have you searched the forum and tried any of these ?
https://forum.xda-developers.com/t/guide-proper-h815-unbrick-through-qfil-files-included.3709212/
https://forum.xda-developers.com/t/...-unbrick-via-external-sdcard-no-qfil.3748946/
https://forum.xda-developers.com/t/lg-g4-h818p-h815-hard-brick-recovered-working.3703565/
https://forum.xda-developers.com/t/unbrick-lg-g4-9008-qualcomm-mbn-files.3574595/