Problem after updating to Nougat. Can´t downgrade to Marshmallow - Sprint Samsung Galaxy S6

Hey guys!
So here is the thing. Today I woke up with the official nougat update (yohoo! right?) but after I updated and the phone restarted and turned on, it starts rebooting. Time after time. I tried wipe partition, wipe factory reset, I tried safe mode, nothing worked. I pick one zip file who said to be a "rom" but it was fake, now i have no OS in my phone. Just the TWRP recovery.
OK, so I downloaded the good file from sammobile about the marshmallow rom, but when I try to install it with Odin, it says "sw rev check fail device 4 binary 3". (I suppose it´s because im trying to downgrade).
Anyway, what should I do?? Greatly appreciated for any help right now the only thing I can do with my phone is play with the recovery and put it on Download mode.
Thanks again!!

Don't use SAMMOBILE, get the file from here: https://forum.xda-developers.com/sp...uide-links-files-update-root-restore-t3366862
Check the MD5 to make sure that you got a good download, then try using Odin again.

koop1955 said:
Don't use SAMMOBILE, get the file from here: https://forum.xda-developers.com/sp...uide-links-files-update-root-restore-t3366862
Check the MD5 to make sure that you got a good download, then try using Odin again.
Click to expand...
Click to collapse
Thanks a lot Koop! In my current situation, should I download QB1 TAR File or -QA2 TAR File?

federico50 said:
Thanks a lot Koop! In my current situation, should I download QB1 TAR File or -QA2 TAR File?
Click to expand...
Click to collapse
Try the latest which is QB1, but no guarantee that it will work for you. Downgrading is always tricky.
If it doesn't, don't panic. In the worst case, the Nougat TAR file will be available in a week or two at most. I'll upload it once it comes out.

koop1955 said:
Try the latest which is QB1, but no guarantee that it will work for you. Downgrading is always tricky.
If it doesn't, don't panic. In the worst case, the Nougat TAR file will be available in a week or two at most. I'll upload it once it comes out.
Click to expand...
Click to collapse
Thanks I´ll download and try now, then I will tell you what happened in an hour or two (my internet is slow lol) thanks as always!

koop1955 said:
Try the latest which is QB1, but no guarantee that it will work for you. Downgrading is always tricky.
If it doesn't, don't panic. In the worst case, the Nougat TAR file will be available in a week or two at most. I'll upload it once it comes out.
Click to expand...
Click to collapse
It worked man!! Thank you very much!!
I do have another problem, that is I don´t have the Hotspot or the activate or desactive button for mobile data. And I have a constant message on the notification panel "Checking device status".
Any news about these?

federico50 said:
It worked man!! Thank you very much!!
I do have another problem, that is I don´t have the Hotspot or the activate or desactive button for mobile data. And I have a constant message on the notification panel "Checking device status".
Any news about these?
Click to expand...
Click to collapse
Make a backup first, if you have TWRP. (See my thread.)
Try this: https://forum.xda-developers.com/sprint-galaxy-s6/development/zip-reenable-hotspot-t3first4
Try going to Settings, System Updates, Update PRL and Profile.

koop1955 said:
Make a backup first, if you have TWRP. (See my thread.)
Try this: https://forum.xda-developers.com/sprint-galaxy-s6/development/zip-reenable-hotspot-t3first4
Try going to Settings, System Updates, Update PRL and Profile.
Click to expand...
Click to collapse
Which one should I download? for ROM with init.d Support or without init.d Support? (sorry if this is a silly question)
No luck with updating PRL and Profile, it says that it can´t update because "no connection" with both but internet is clearly working and the nougat update its downloading again.. Weird.
By the way the Nougat download finished and I tried to install it but no luck. The phone still restarting so im going back to your rom!

federico50 said:
Which one should I download? for ROM with init.d Support or without init.d Support? (sorry if this is a silly question)
No luck with updating PRL and Profile, it says that it can´t update because "no connection" with both but internet is clearly working and the nougat update its downloading again.. Weird.
By the way the Nougat download finished and I tried to install it but no luck. The phone still restarting so im going back to your rom!
Click to expand...
Click to collapse
It is not a ROM in the usually accepted sense, it is the stock image file. If you follow the thread and Root your phone and install TWRP, you won't get the Nougat OTA again. The downside is that if you later decide that you want Nougat, you'll have to manually flash it, but that sounds like a better solution for you anyway.

koop1955 said:
It is not a ROM in the usually accepted sense, it is the stock image file. If you follow the thread and Root your phone and install TWRP, you won't get the Nougat OTA again. The downside is that if you later decide that you want Nougat, you'll have to manually flash it, but that sounds like a better solution for you anyway.
Click to expand...
Click to collapse
Sorry I think you misunderstood me, i was asking which one of the two files in your thread I should download (sorry if this is stupid but i dont wanna mess it up more)
Sure that sounds like a better solution

federico50 said:
Sorry I think you misunderstood me, i was asking which one of the two files in your thread I should download (sorry if this is stupid but i dont wanna mess it up more)
Sure that sounds like a better solution
Click to expand...
Click to collapse
Hi.i had this problem too.i used 4 file flash from gem flash.use qb1.always 4 file rom is betet.then u can update to nougat

Related

[KitKat OTA update but SG4 Rooted] trying to enable OTA with "TriangleAway" method

[KitKat OTA update but SG4 Rooted] trying to enable OTA with "TriangleAway" method
Hello everyone,
I'm posting today because I need some help like many others .
Here is my situation I bought a SG4 mini a year ago the GT-I9195 version (Europe France to be more accurate).
I rooted it because I needed to using the XDA method : http://forum.xda-developers.com/showthread.php?t=2364980
I did not change the ROM so I'm technically still on the official 4.2.2 rom : JDQ39.I9195XXUAMG8 (see attachment "1.png")
I did however install the "CWM-Based Recovery v6.0.3.7 " boot system to have advanced boot features.
The OTA Kit Kat is now available in my country, I was hoping to do it using the OTA update directly from the phone, unfortunatly I receive the error message "your device has been modified software updates are not available" (see attachment "2.png").
My goal is to update to android Kit-Kat without having to re-format completely my phone to factory settings, and just trick the phone to make it think it's not "modified".
After doing some research I found an application that does this "Triangle Away : " http://forum.xda-developers.com/galaxy-s2/orig-development/2014-01-15-triangleaway-v3-26-t1494114
So after running it I discovered that the status of my phone was "Binary = Custom" and "System=Modified" (see attachment "3.png")
So I managed to reset the status of Binary and System to "Official" using triangle away (see attachment "4.png").
But when I try to do the OTA update I still get the "your device has been modified software updates are not available" message .
And when I go into phone status the "Device Status" phone says it's "Custom" even-though it says official in the triangle away app" (see attachment "5.png")
Can someone please help me figure this out ?
Thank you XDADEV and all the members for this great community, that has helped me so many times over the years !
Frem
TriangleAway is not supporting our device.
But anyway: I would suggest either updating with Kies or with Odin (if the Kitkat Firmware for your CSC is available at Sammobile.com).
Sent from my black pearl using Tapatalk
But this imply that I will need to format the system completely
No, you don't!
You only need to root it again afterwards (with Towelroot - in case it still works - or using other methods like the Rootkit).
Thank you for that info i'm going to try it this afternoon.
I'm downloading the lastest firmware right now (http://www.sammobile.com/firmwares/3/?download=35387 ), is there any tutorial around for upgrading using Kies ?
The downloaded firmware has to be flashed with Odin. Upgrading firmware with Kies is very straightforward: install Kies, connect your phone via USB, Kies will check for updates, ...
Sent from my black pearl using Tapatalk
nunein said:
The downloaded firmware has to be flashed with Odin. Upgrading firmware with Kies is very straightforward: install Kies, connect your phone via USB, Kies will check for updates, ...
Sent from my black pearl using Tapatalk
Click to expand...
Click to collapse
I tried with Kies unfortunately, Kies doesn't find the new update which is strange, it tells me I already have the last firmware 4.2.2 which is from last year (see attachment).
I will use Odin, I just hope it won't erase all my apps, homescreen, app settings ...
frem said:
I tried with Kies unfortunately, Kies doesn't find the new update which is strange, it tells me I already have the last firmware 4.2.2 which is from last year (see attachment).
I will use Odin, I just hope it won't erase all my apps, homescreen, app settings ...
Click to expand...
Click to collapse
I'm pretty shure it willl erase everything
Flatric said:
I'm pretty shure it willl erase everything
Click to expand...
Click to collapse
Yeah which is what I want to avoid . I guess I don't have any choice since triangle Away isn't compatible .
Are you sure nunein that the 4.4.2 android version is rootable with those tools Towelroot Rootkit ?
frem said:
Yeah which is what I want to avoid . I guess I don't have any choice since triangle Away isn't compatible .
Are you sure nunein that the 4.4.2 android version is rootable with those tools Towelroot Rootkit ?
Click to expand...
Click to collapse
Do you know the app Titanium Backup?
Flatric said:
I'm pretty shure it willl erase everything
Click to expand...
Click to collapse
Flatric said:
Do you know the app Titanium Backup?
Click to expand...
Click to collapse
Yes I actually have it installed on my phone as root, but I only used it once because I needed to restore some backup for angry birds.
Lol I forgot about it I guess I can use it to backup and restore everything I never use it like that before.
Thank you for the tip I'll look how to backup everything first and restore it after.
But I'll need to be root to restore after I guess ?
I don't have the "pro version"
frem said:
Yes I actually have it installed on my phone as root, but I only used it once because I needed to restore some backup for angry birds.
Lol I forgot about it I guess I can use it to backup and restore everything I never use it like that before.
Thank you for the tip I'll look how to backup everything first and restore it after.
But I'll need to be root to restore after I guess ?
I don't have the "pro version"
Click to expand...
Click to collapse
Yes your phone has to be rootet to restore your backups, but it's really worth it to buy the pro version.
If you're updating to KitKat, you will loose everything with Odin.
I suggest that you backup everything with TB and after upgrading, do not restore everything! You will have errors because upgrading from JB to KK. So, you should install everything as it was from Google Play, then restore the data of the app to avoid problems.
Good Luck!
Press THANKS if I helped!
RoyaLKurTx3 said:
If you're updating to KitKat, you will loose everything with Odin.
I suggest that you backup everything with TB and after upgrading, do not restore everything! You will have errors because upgrading from JB to KK. So, you should install everything as it was from Google Play, then restore the data of the app to avoid problems.
Good Luck!
Press THANKS if I helped!
Click to expand...
Click to collapse
Thank you for the advice I'm actually thinking of upgrading tonight I was busy this week-end.
I hope Kit-Kat is really worth it....
My jellybean ROM is getting more and more unstable...
frem said:
Thank you for the advice I'm actually thinking of upgrading tonight II was busy this week-end.
I hope Kit-Kat is really worth it....
My jellybean ROM is getting more and more unstable...
Click to expand...
Click to collapse
There's isn't much of a 'visible' upgrade from JB to KK, but there are 'behind the scenes' updates, which are very good.
RoyaLKurTx3 said:
There's isn't much of a 'visible' upgrade from JB to KK, but there are 'behind the scenes' updates, which are very good.
Click to expand...
Click to collapse
Right now I'm looking for the last version of Odin and it's harder than it seems many fake website around like this one :
http://odindownload.com/
or this one :
http://www.samsungodindownload.com/
Found it 309 : http://androidcentral.us/2013/11/download-odin/
frem said:
Right now I'm looking for the last version of Odin and it's harder than it seems many fake website around like this one :
http://odindownload.com/
or this one :
http://www.samsungodindownload.com/
Found it 309 : http://androidcentral.us/2013/11/download-odin/
Click to expand...
Click to collapse
I use the one attached. Been using it for more than a year.
Open it, press PDA, and insert the .tar.md5 file you downloaded. Be sure your phone is read and is in Download Mode and start. It will take 9:30mins to complete the process (sometimes more, sometimes less) and some more minutes to completely boot up.
Good Luck.
RoyaLKurTx3 said:
I use the one attached. Been using it for more than a year.
Open it, press PDA, and insert the .tar.md5 file you downloaded. Be sure your phone is read and is in Download Mode and start. It will take 9:30mins to complete the process (sometimes more, sometimes less) and some more minutes to completely boot up.
Good Luck.
Click to expand...
Click to collapse
Did you by any chance already went through the process of rooting the 4.4.2 SG4 mini ?
Hello,
I'm flashing with odin 3.09
No problem
I flashed the rom from sammobile for France. works great.
Salut à toi
frem said:
Did you by any chance already went through the process of rooting the 4.4.2 SG4 mini ?
Click to expand...
Click to collapse
More than 10 times
I use this: http://autoroot.chainfire.eu/

Original Recovery

Hi Guys!
I switched to TWRP and did not backup the original recovery. Is there any way to get the original file and install over twrp to go back to stock? I use the Tab S-10.5 LTE if that does matter?
Thanks a lot!
Nettzwerg said:
Hi Guys!
I switched to TWRP and did not backup the original recovery. Is there any way to get the original file and install over twrp to go back to stock? I use the Tab S-10.5 LTE if that does matter?
Thanks a lot!
Click to expand...
Click to collapse
Easiest way is to flash cf-autroot, it will replace recovery with stock. It will also root your device. To remove root just open the Super su app and select Full unroot from the settings.
Thanks a lot!
I will try it tomorrow
Hi Guys!
I still havent solved the problem! I cant install cf Autoroot! I have no idea why. I'd like to go back to a full stock device. Please do not argue with me about it.. i just like to do so
I'd really appriciate it if someone can provide me the original recovery (or is it the bootloader that twrp is?! - I dont know...). But the original file so I can go back to stock. I really tried to search for it on the web, but i really can´
t find it.
Thanks a lot! :fingers-crossed:
What do you mean you can't flash cfautoroot? Did you use the right one for your device?
You can pull the recovery image from any stock Rom. Just flash it with twrp using the image flash option or just flash the whole Rom.
Thanks!
I will try it!
I really dont know! I defnitly used the right cf autoroot file. But when i try to flash it, odin gets stuck in "setup connection"... It's stuck there until odin stops and shows the "fail" error massage?!
I use Windows and startet odin as administrator.
Nettzwerg said:
Thanks!
I will try it!
I really dont know! I defnitly used the right cf autoroot file. But when i try to flash it, odin gets stuck in "setup connection"... It's stuck there until odin stops and shows the "fail" error massage?!
I use Windows and startet odin as administrator.
Click to expand...
Click to collapse
Do you get the added message? I take it you have extracted the tar file from the zip and not attempting to flash the zip directly?
Yes..Odin shows added..AND I extracted the tar file.
Really i have no idea what the problem is. I also made shure to use the right cf autoroot file...I don't know...
Since i can flash nearly everything else with success i dont think that i make a mistake
Do you have reactivation lock enabled?
I have absolutly no idea what you mean...could be a step forward
http://www.samsung.com/us/support/howtoguide/N0000002/17296/229710/SCH-N330PWLXAR
Thanks for the link. It works for me...
Finally I solved my problem! Thank you all for your help and support :good: :laugh:
Nettzwerg said:
Finally I solved my problem! Thank you all for your help and support :good: :laugh:
Click to expand...
Click to collapse
And the solution was?
ashyx said:
And the solution was?
Click to expand...
Click to collapse
I followed your advise and just flashed the original rom file! Including the bootloader.
Shortly after i did, i also recived the ota lollipop update.
So i'm back to stock as i wished.
Thanks a lot

[GUIDE] Links for Files - Update, Root and Restore (UPDATED TO QK1)

QK1 TAR File: https://www.androidfilehost.com/?fid=673791459329068925
Prior version if needed:
QJ1 TAR File: https://www.androidfilehost.com/?fid=889964283620769224
HOW TO ROOT USING MAGISK:
Flash stock with Odin. The latest build is posted above. Reboot and complete setting up the phone.
Download Magisk Zip and Magisk Manager APK (these are two different things, you need both) and place them on your phone. Download from https://magiskmanager.com/
Do the usual to enable Developer Options (tap on build number until you see it enabled) and set OEM Unlock ot on (this is a setting under developer options.) Make sure you do these steps.
Go into Download mode. Turn phone off. Hold Volume Down, Home and Power buttons. We'll do something similar in a minute.
Flash TWRP via Odin, but DO NOT REBOOT. TWRP is here, use the TAR file. https://dl.twrp.me/zerofltespr/
Manually Power phone down by holding the Power button a really long time.
Manually boot into Recovery. Hold Volume Up, Home and Power. You should now be in TWRP.
Use TWRP to flash the Magisk zip file. When you reboot, you should be rooted.
Reboot and install the Magisk APK. Allow "Unknown sources."
You can still root your phone using SuperSU, but I am not supporting that.
thank you for your link.
- have you got the latest PD2 rom file yet?
- does the TWRP work on PD2 build?
thanks again
Thank you so much for the help and the resources, i definetly would need to make nandroid backup so i won't go through that pain again lol c:
FYI, the new PD2 build is already updated...
http://samsung-updates.com/device/?id=SM-G920P
yaibakt said:
FYI, the new PD2 build is already updated...
http://samsung-updates.com/device/?id=SM-G920P
Click to expand...
Click to collapse
Thanks and I am grabbing that now, will post an Android File Host link. However, I am going to include a cautionary note until we clarify the situation with TWRP.
But I am glad that you pointed that out.
koop1955 said:
Thanks and I am grabbing that now, will post an Android File Host link. However, I am going to include a cautionary note until we clarify the situation with TWRP.
But I am glad that you pointed that out.
Click to expand...
Click to collapse
thank you for your download and upload work. it spends your time and stuffs.
also for the TWRP. I am waiting for the new TWRP version now.
cant live without being rooted nor xposed...
Amazing! If you want any help organizing or anything like that, feel free to let me know :good:
JoeFCaputo113 said:
Amazing! If you want any help organizing or anything like that, feel free to let me know :good:
Click to expand...
Click to collapse
Thanks, Joe. I think that the next step (and it won't be me!) is to do a video tutorial. A "How To Use" this stuff like Tim (QBKing) used to do.
did anyone have TWRP on the lastest PD2 yet?
im about to re-flash the rom this weekend and want to try the PD2.
if not, i guess i must stay at PB6
yaibakt said:
did anyone have TWRP on the lastest PD2 yet?
im about to re-flash the rom this weekend and want to try the PD2.
if not, i guess i must stay at PB6
Click to expand...
Click to collapse
yes,i have PD2 and TWRP 3.0.0.1.
everythings is ok.
note:dont root your phone with flashing supersu.zip (this method dont work good and have some issues)
use g920F (not g920P) cf auto root image (work great)
yaibakt said:
did anyone have TWRP on the lastest PD2 yet?
im about to re-flash the rom this weekend and want to try the PD2.
if not, i guess i must stay at PB6
Click to expand...
Click to collapse
I have twrp working on cpd2 ill see if i can find the link to the whole package
You gotta flash it via odin and it says for pb6 but during flash , it updates the firmware
Sent from my SM-G920P using Tapatalk
I didn't see this question is the pd2 link an update or a full wipe?
cyberone3 said:
I didn't see this question is the pd2 link an update or a full wipe?
Click to expand...
Click to collapse
Complete TAR file.
i confirm that the TWRP in #1 works with latest PD2.
yaibakt said:
i confirm that the TWRP in #1 works with latest PD2.
Click to expand...
Click to collapse
Thanks for this, have not gotten around to testing myself.
Could you post any feedback that you might have on PD2 itself? Worth bothering with, or just a minor security thing?
Im about to go get my new replacement S6 and have a feeling its going to be on the latest firmware so good to hear it works on Pd2. Well TWRP works on PD2what about flashing supersu 2.71 in twrp does that brick it? Or did u use cfautoroot?
Jimmy1life said:
Im about to go get my new replacement S6 and have a feeling its going to be on the latest firmware so good to hear it works on Pd2. Well TWRP works on PD2what about flashing supersu 2.71 in twrp does that brick it? Or did u use cfautoroot?
Click to expand...
Click to collapse
You'd be surprised actually, when I got my replacement, it came with the like second updat, lol
Jimmy1life said:
Im about to go get my new replacement S6 and have a feeling its going to be on the latest firmware so good to hear it works on Pd2. Well TWRP works on PD2what about flashing supersu 2.71 in twrp does that brick it? Or did u use cfautoroot?
Click to expand...
Click to collapse
Twrp and supersu 2.71 work for me.
Nothing noticeable between pd2 and pb6 actually so if you are still good on pb6, let it stay there.
BTW i get good battery life on pd2 as you can see my attached SS. Will pass 5 hrs sot easily, even more.
Sent from my SM-G920P using Tapatalk
@yaibakt, any chance you could edit your post to reduce the image size or just eliminate it, now that it has been seen?
Trying to keep the thread clean.
Thanks.
Ok, i will delete the image.
I upload directly from tapatalk app so i cant resize it.
Sent from my SM-G920P using Tapatalk

//SM-N920A\\ **N920AUCU4EQC6 NOUGAT Full Odin** - Links UP

Some people just post info and never post links . I had firmware for sometime already but i was waiting for other guy to post it. I know we all looking for full Odin files so here they are :
AP_N920AUCU4EQC6_CL10809541_QB12921033_REV00_user_lo w_ship_meta.tar
CSC_ATT_N920AATT4EQC6_CL10809541_QB12921033_REV00_use r_low_ship.tar
CP_N920AUCU4EQC6_CP6021124_CL10809541_QB12921033_REV 00_user_low_ship.tar
BL_N920AUCU4EQC6_CL10809541_QB12921033_REV00_user_lo w_ship.tar
Download Link of :
Nougat_N920AUCU4EQC6_Odin_Files
All this files are in one zip. Unzip and put this in appropriate windows in ODIN.
Here are Odin 3.12.3
Good Luck.
Of course, this will wipe my device again, even though I do not select the CSC?
If you allow it to flash a new system and user data image then yes.
You basically need a wipe anyways going from MM to Nougat.
Sent from my Galaxy Note5 using XDA Labs
I'm already on Nougat N920AUCU4EQC5. I'm just trying to avoid having to wipe my phone
When i use this. It passes Odin then when the phone tries to reboot and install the update it says deleting then im back to 6.0.1. Any idea why?
norbarb said:
Some people just post info and never post links . I had firmware for sometime already but i was waiting for other guy to post it. I know we all looking for full Odin files so here they are :
AP_N920AUCU4EQC6_CL10809541_QB12921033_REV00_user_lo w_ship_meta.tar
CSC_ATT_N920AATT4EQC6_CL10809541_QB12921033_REV00_use r_low_ship.tar
CP_N920AUCU4EQC6_CP6021124_CL10809541_QB12921033_REV 00_user_low_ship.tar
BL_N920AUCU4EQC6_CL10809541_QB12921033_REV00_user_lo w_ship.tar
Download Link of :
Nougat_N920AUCU4EQC6_Odin_Files
All this files are in one zip. Unzip and put this in appropriate windows in ODIN.
Good Luck.
Click to expand...
Click to collapse
thank you very much for the link, bro.. i'm already Nougated now. experiencing some blue screen, but when i'm using newest odin.. all fixed.. thx again, man, you are the best.
DuganNash said:
When i use this. It passes Odin then when the phone tries to reboot and install the update it says deleting then im back to 6.0.1. Any idea why?
Click to expand...
Click to collapse
You may use wrong odin, some security installed on your phone, What build are you on?
norbarb said:
You may use wrong odin, some security installed on your phone, What build are you on?
Click to expand...
Click to collapse
It is Odin 3.12 run as admin. it gives me the green pass, then bootloader rolls back to MM
I am on build QB2 as of now.
DuganNash said:
It is Odin 3.12 run as admin. it gives me the green pass, then bootloader rolls back to MM
I am on build QB2 as of now.
Click to expand...
Click to collapse
Can you post your about phone screen ?
norbarb said:
Can you post your about phone screen ?
Click to expand...
Click to collapse
here you go, thank you
DuganNash said:
here you go, thank you
Click to expand...
Click to collapse
Thanks. Ok. Do you have any security like any kind encryption installed on your phone ?
I update first post with newest ODIN. Are you unzipping file you download and put tar files in correct windows? Are you in Download mode when using ODIN ?
norbarb said:
Thanks. Ok. Do you have any security like any kind encryption installed on your phone ?
I update first post with newest ODIN. Are you unzipping file you download and put tar files in correct windows? Are you in Download mode when using ODIN ?
Click to expand...
Click to collapse
I'm not sure about security . It was a stock at note 5 until I tried updated to qb2. All dev factors are turned on, and the rar files are all unzipped and loaded through odin in download mode. It passes then the android update screen (the little robot ) says erasing upon revoot and I boot into mm again
DuganNash said:
I'm not sure about security . It was a stock at note 5 until I tried updated to qb2. All dev factors are turned on, and the rar files are all unzipped and loaded through odin in download mode. It passes then the android update screen (the little robot ) says erasing upon revoot and I boot into mm again
Click to expand...
Click to collapse
OK. Try this , After you unzip from one zip to 4 files , unzip all 4 files to tar.md5 and try ODIN again. Check for any encryption installed on your phone preventing bootloader from overwriting files.
norbarb said:
OK. Try this , After you unzip from one zip to 4 files , unzip all 4 files to tar.md5 and try ODIN again. Check for any encryption installed on your phone preventing bootloader from overwriting files.
Click to expand...
Click to collapse
i tried this after making sure the phone was not encrypted under the security setting. Same result unfortunately. am looking for alternatives
You're the man !! just the files Odin I was looking for. I want to marry with you ... make me a son jajaja
DuganNash said:
i tried this after making sure the phone was not encrypted under the security setting. Same result unfortunately. am looking for alternatives
Click to expand...
Click to collapse
You have to necessarily erase the security lock fingerprints, you also have to remove the password lock, you have not any type of security lock, then you have to enable developer options and type USB debugging(This last one I do not know if it is strictly necessary, but just in case)If you have some security lock on your phone, even if you pray, you will not be able to!
After update installation it is sayin(device didn't have DRK,please install DRK first)
Please help me
Thanks
TaimooR Khawaja said:
After update installation it is sayin(device didn't have DRK,please install DRK first)
Please help me
Thanks
Click to expand...
Click to collapse
What did you flash before this stock firmware?
DRK=device root key
Clicking from Edge of Galaxy
Just a thought, can you Odin flash any other version of the official AT&T firmware? Maybe try another version to see if the phone is truly screwed.
Also, have you tried a factory reset on the phone first. Maybe something (anything) loaded on the phone is preventing the Odin flash. I know this shouldn't matter but it's worth a try.
mattern1974 said:
Just a thought, can you Odin flash any other version of the official AT&T firmware? Maybe try another version to see if the phone is truly screwed.
Also, have you tried a factory reset on the phone first. Maybe something (anything) loaded on the phone is preventing the Odin flash. I know this shouldn't matter but it's worth a try.
Click to expand...
Click to collapse
Same here.. i try to flash it via odin v3.12 it showing pass message..
After reboot my phone still on MM 6.0.1

Stock rom for S4 mini GT-I9190

Hi there can anybody give me a link to a flashable zip of the stock frimware. I tried to flash the md5 file through odin and it keeps failing. I tried diffrent versions of odin and on Windows 7 and Windows 10 and still no luck
Will appreciate it thanks.
Billabomb75 said:
Hi there can anybody give me a link to a flashable zip of the stock frimware. I tried to flash the md5 file through odin and it keeps failing. I tried diffrent versions of odin and on Windows 7 and Windows 10 and still no luck
Will appreciate it thanks.
Click to expand...
Click to collapse
I don't know where there is a flasheable zip off hand, but you can make your own, there are several tutorials online, search for something like "Convert stock rom to flashable zip"
IronRoo said:
I don't know where there is a flasheable zip off hand, but you can make your own, there are several tutorials online, search for something like "Convert stock rom to flashable zip"
Click to expand...
Click to collapse
I dont have astock rom anymore
Billabomb75 said:
I dont have astock rom anymore
Click to expand...
Click to collapse
You can get stock rom from sammobile.com
https://www.sammobile.com/firmwares/galaxy-s4-mini/GT-I9190/
Billabomb75 said:
.....through odin and it keeps failing.
Click to expand...
Click to collapse
When you say failing, what do you mean? what is the error that you are getting on the phone?
i ask because i am having similar issues. am currently on lineage 7.1.1 and i found a single post out there that mentioned that when i flashed up to 7.1.1 that it triggered a fuse in the flash memory, that cannot be reversed. The error message i get seems to indicate that this is correct. fused2 > binary 1 - meaning that my handset is fused to 2 but the one i am flashing is only a 1.
i have a fully working phone on 7.1.1 but i want to revert to stock and am unable to do so
mrtim123 said:
When you say failing, what do you mean? what is the error that you are getting on the phone?
i ask because i am having similar issues. am currently on lineage 7.1.1 and i found a single post out there that mentioned that when i flashed up to 7.1.1 that it triggered a fuse in the flash memory, that cannot be reversed. The error message i get seems to indicate that this is correct. fused2 > binary 1 - meaning that my handset is fused to 2 but the one i am flashing is only a 1.
i have a fully working phone on 7.1.1 but i want to revert to stock and am unable to do so
Click to expand...
Click to collapse
I get a system write fail on system.ext4... So now i use the carbon 4.4.4 rom
Want to go back to stock
Billabomb75 said:
I get a system write fail on system.ext4... So now i use the carbon 4.4.4 rom
Want to go back to stock
Click to expand...
Click to collapse
ah right. same wants but different issue by the sound of it.
sorry i cant help!

Categories

Resources