Related
Apologize for the simpleton question/layout but it's been awhile since I did this to a rband new tablet and wanted to make sure I have it down right before proceeding.
1. Install Samsung USB drivers
2. Root tab following these instructions: http://forum.xda-developers.com/showthread.php?t=2661198
3. Install CWM follwoing these instructions: http://forum.xda-developers.com/showthread.php?t=2666232
4. Download CM11 ROM and GAPPS from here: http://forum.xda-developers.com/showthread.php?t=2666246
5. Copy CM11 ROM and GAPPS to Msd card
6. Boot into recovery (CWM)
7. Factory reset and Dalvik wipe
8. Install CM11 and GAPPS via CWM
9. Reboot
Did I miss anything?
vexille said:
Apologize for the simpleton question/layout but it's been awhile since I did this to a rband new tablet and wanted to make sure I have it down right before proceeding.
1. Install Samsung USB drivers
2. Root tab following these instructions: http://forum.xda-developers.com/showthread.php?t=2661198
3. Install CWM follwoing these instructions: http://forum.xda-developers.com/showthread.php?t=2666232
4. Download CM11 ROM and GAPPS from here: http://forum.xda-developers.com/showthread.php?t=2666246
5. Copy CM11 ROM and GAPPS to Msd card
6. Boot into recovery (CWM)
7. Factory reset and Dalvik wipe
8. Install CM11 and GAPPS via CWM
9. Reboot
Did I miss anything?
Click to expand...
Click to collapse
Make a backup of your stock ROM after step 6
jmill75 said:
Make a backup of your stock ROM after step 6
Click to expand...
Click to collapse
but be aware that that recovery cannot be cleanly restored at this time.
The custom recovery is still very valuable - for installing CM11, and for getting ADB access to the device in recovery mode.
But a restore will need to be accompanied by a factory reset to get the stock OS to boot again, or an Odin reflash of the stock image. My take on it is that the android_secure files cannot be backed up by CWM as of now.
Anyone planning on flashing a ROM might consider downloading the stock image for their device before they start, IMO.
How to flash MIUI Global stable ROM in Xiaomi Redmi 1s. I am currently on Nougat based ROM.
I tried fastboot method by flash tool but no luck.
Also tried flashing recovery file by TWRP again not worked.
Please help me to flash MIUI
I thing MIUI recovery and unroot is needed
saurabhrakshak said:
How to flash MIUI Global stable ROM in Xiaomi Redmi 1s. I am currently on Nougat based ROM.
I tried fastboot method by flash tool but no luck.
Also tried flashing recovery file by TWRP again not worked.
Please help me to flash MIUI
I thing MIUI recovery and unroot is needed
Click to expand...
Click to collapse
Just go to twrp wipe all thing ( systm ,data ,cache,dalvik ) then reboot recvry
Then install miui 8.2 or any build and then reboot thts its it will take long time to instal dnt panic
vjadhikari said:
Just go to twrp wipe all thing ( systm ,data ,cache,dalvik ) then reboot recvry
Then install miui 8.2 or any build and then reboot thts its it will take long time to instal dnt panic
Click to expand...
Click to collapse
I did this but error occurred
Which file I have to flash??
I tried recovery zip but due to less system space falshing error occured
clean flash MIUI ROM
error will appear
clear dalvik-cache
flash the rom again
EmanzzKie said:
clean flash MIUI ROM
error will appear
clear dalvik-cache
flash the rom again
Click to expand...
Click to collapse
Can you tell me step by step procedure
Which file should download..Can I flash the zip using TWRP ?
saurabhrakshak said:
Can you tell me step by step procedure
Which file should download..Can I flash the zip using TWRP ?
Click to expand...
Click to collapse
Follow this exactly. This works for me, but right now Im not using stock rom.
Requirements:
Latest version of twrp 3.0.2-1;
If you can't flash the rom switch to twrp version 3.0.2
A backup of files
1. Download latest MIUI Rom for Redmi 1s
(You can get it on google)
2. Put Rom into your sd card
3. Reboot to recovery
4. Wipe>Advanced Wipe
- Dalvik cache
- cache
-system
-data
-internal storage (backup your files)
5. Swipe to wipe
6. Flash rom via Install>select storage > sd card > (find your rom)
7. Either flashing will be successful or not
If not then error will appear, then wipe dalvik cache
8. Flash the rom again
-it should work (requirement applies)
Changing recoveries might help (dunno why)
Try switching to philz touch
Then clean flash rom
saurabhrakshak said:
I did this but error occurred
Which file I have to flash??
I tried recovery zip but due to less system space falshing error occured
Click to expand...
Click to collapse
Did u rebooted recvry aftr wiping all ?
And if error occured again flash it . it will be flashd i am sure .
vjadhikari said:
Did u rebooted recvry aftr wiping all ?
And if error occured again flash it . it will be flashd i am sure .
Click to expand...
Click to collapse
EmanzzKie said:
Follow this exactly. This works for me, but right now Im not using stock rom.
Requirements:
Latest version of twrp 3.0.2-1;
If you can't flash the rom switch to twrp version 3.0.2
A backup of files
1. Download latest MIUI Rom for Redmi 1s
(You can get it on google)
2. Put Rom into your sd card
3. Reboot to recovery
4. Wipe>Advanced Wipe
- Dalvik cache
- cache
-system
-data
-internal storage (backup your files)
5. Swipe to wipe
6. Flash rom via Install>select storage > sd card > (find your rom)
7. Either flashing will be successful or not
If not then error will appear, then wipe dalvik cache
8. Flash the rom again
-it should work (requirement applies)
Changing recoveries might help (dunno why)
Try switching to philz touch
Then clean flash rom
Click to expand...
Click to collapse
Gonna try.. I let you know
Thanks in advance :good:
saurabhrakshak said:
Gonna try.. I let you know
Thanks in advance :good:
Click to expand...
Click to collapse
YES WORKED..
clear all then flash first time got error
again clear all catch internal external reboot to recovery
then flashed
Successed :good:
saurabhrakshak said:
YES WORKED..
clear all then flash first time got error
again clear all catch internal external reboot to recovery
then flashed
Successed :good:
Click to expand...
Click to collapse
Yeppp
How to install native root, miui v.8.2.1.0
zam09 said:
How to install native root, miui v.8.2.1.0
Click to expand...
Click to collapse
Fastboot twrp as redmi 1s doesn't have boot loader locked next flash SuperSU zip
I rooted my oneplus 3 with twrp and superSU. Now I want to install the latest update of oxygenOS and want to root with magisk. What should I do?
tonmoysust said:
I rooted my oneplus 3 with twrp and superSU. Now I want to install the latest update of oxygenOS and want to root with magisk. What should I do?
Click to expand...
Click to collapse
I presume you are on OOS. Download and flash full zip of OOS (not OTA), flash TWRP (latest) and flash Magisk in that order. Reboot after all flash is complete.
To be on the safer side, wipe system, data (excluding storage), Dalvic and cache and reboot into recovery before flashing OOS.
tnsmani said:
I presume you are on OOS. Download and flash full zip of OOS (not OTA), flash TWRP (latest) and flash Magisk in that order. Reboot after all flash is complete.
To be on the safer side, wipe system, data (excluding storage), Dalvic and cache and reboot into recovery before flashing OOS.
Click to expand...
Click to collapse
Can you give me any particular guide link?
tonmoysust said:
Can you give me any particular guide link?
Click to expand...
Click to collapse
Hi its quiet easy.
U have TWRP recivery.
So first download OOS full zip. Yhe link you can find in oneplus website or forum.
Then download latest magisk from official site .( It is universal ,it is not device specific. )
Back up your data.
Go to recovery ,do a nandroid backup( optional but recommended)
Then wipe cache,dalvic,system,data( all data gone)
Dont format sd card. ( Files in internal memory preserved,but still better to back up)
Then install the OOS zip
After that install magisk zip
Reboot to recovery( to preserve the TWRP,some times it gets changed to stock)
Reboot system.
Check for magisk manager
If not download from magisk forum. Check root.
you are done.
This is all According to my knowledge. Please feel free to correct me.
Usefull links ( i hope i can share links no issue in that !??)
https://forum.xda-developers.com/oneplus-3/how-to/oneplus-3-how-to-unlock-bootloader-t3398733
https://forum.xda-developers.com/oneplus-3/how-to/oxygenos-5-0-7-ota-oneplus-3-3t-t3872820
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
I am Argentine and practically do not speak English, so I will use the translator and it will not be the most accurate.
I am one of the people who change the ROOM of my cell phone every week and until nothing, 1 month I almost get the "Error 7 updater" in TWRP when installing any ROOM AOSP, but in ROOMS xiaomi does not happen, I have seen videos on which said that I had to modify a text inside the room and others, which works and removes the error but at the time of using the device it does not work for me:
The flashlight, the camera, does not recognize the PC, has no audio and so on.
I can not find any way out of that error, and I'm a fan of pixel experience, I went back to Miui because I wanted to use the gestures they had a few days since I missed them when I had the buttons on the screen, but when I wanted to reinstall the pixel experience came out that error, and with any other room that is not MIUI, please the one that can help me I thank you :good:
You need to flash official twrp recovery. download recovery from https://dl.twrp.me/whyred/ and place it in you internal storage or sdcard et cetra and flash from your current recovery. I hope this will solve your problem.
But remember that the link i mentioned above is only for whyred (Note 5 Pro)
thanks your answer, but that does not solve the problem, in fact I already have installed the twrp 3.3.0.0
Nicolasloleggio said:
thanks your answer, but that does not solve the problem, in fact I already have installed the twrp 3.3.0.0
Click to expand...
Click to collapse
1. unlock bootloader
2. Boot twrp temporarily and then flash twrp.img from twrp recovery (always flash latest twrp recovery)
3. Format data
4. Wipe >> advanced wipe >> wipe system data cache and dalvik cache
5. Reboot to twrp recovery once again (very important)
6. Flash pixel experience ROM
7. Reboot to system
Do this and you are good to go
I followed the instructions but it doesn't work. all aosp roms cannot be installed by error 7 in twrp
A mí me pasó instale la ROM Havoc y volví a Miui... después me salió ese error 7 cuando quise instalar la pixel experience lo solucione haciendo el 'format data' borrando la memoria interna.
I performed the following instructions on my phone (360 hours of waiting)
1. unlock bootloader ok
2. from fastboot (fastboot boot twrp-3.3.0-0-whyred.img) boot twrp temporarily and then flash twrp-3.3.0-0-whyred.img from twrp recovery to recovery partition (always flash latest twrp recovery)
3. Format data
4. Wipe >> advanced wipe >> wipe system data cache and dalvik cache
5. Reboot to twrp recovery once again
6. Flash pixel experience ROM
but it does not work error 7
assert failed: whyred .verify_trustzone("tz.bf.4.0.7-00082") == "1"
updater process ended with ERROR: 7 error installing zip file ....
unfortunately I can't install custom rom aosp
if I install rom whyred miui.eu it works perfectly
ancer said:
I performed the following instructions on my phone (360 hours of waiting)
1. unlock bootloader ok
2. from fastboot (fastboot boot twrp-3.3.0-0-whyred.img) boot twrp temporarily and then flash twrp-3.3.0-0-whyred.img from twrp recovery to recovery partition (always flash latest twrp recovery)
3. Format data
4. Wipe >> advanced wipe >> wipe system data cache and dalvik cache
5. Reboot to twrp recovery once again
6. Flash pixel experience ROM
but it does not work error 7
assert failed: whyred .verify_trustzone("tz.bf.4.0.7-00082") == "1"
updater process ended with ERROR: 7 error installing zip file ....
unfortunately I can't install custom rom aosp
if I install rom whyred miui.eu it works perfectly
Click to expand...
Click to collapse
Download Miflash official tool and Latest fastboot firmware file. Connect your device in fastboot mode and flash stock rom. After flashing complete.
1. unlock bootloader (this time there will be no waiting time).
2. Flash latest twrp.
3. Now, You can flash any rom without errors.
01Thesam said:
Download Miflash official tool and Latest fastboot firmware file. Connect your device in fastboot mode and flash stock rom. After flashing complete.
1. unlock bootloader (this time there will be no waiting time).
2. Flash latest twrp.
3. Now, You can flash any rom without errors.
Click to expand...
Click to collapse
first of all thank you
but
stock rom is global 10.2.2.0?
Is it dangerous for roll-back?
now I don't have any roms inside the phone
ancer said:
first of all thank you
but
stock rom is global 10.2.2.0?
Is it dangerous for roll-back?
now I don't have any roms inside the phone
Click to expand...
Click to collapse
Were you on MIUI pie beta before trying the flashing?
PE is based on Oreo firmware, if you flash it when you have Pie firmware, error 7 will come up.
01Thesam said:
Download Miflash official tool and Latest fastboot firmware file. Connect your device in fastboot mode and flash stock rom. After flashing complete.
1. unlock bootloader (this time there will be no waiting time).
2. Flash latest twrp.
3. Now, You can flash any rom without errors.
Click to expand...
Click to collapse
RKStyles said:
Were you on MIUI pie beta before trying the flashing?
PE is based on Oreo firmware, if you flash it when you have Pie firmware, error 7 will come up.
Click to expand...
Click to collapse
before flashing was with global 10.2.2. android ??? Oreo? I do not remember
ancer said:
before flashing was with global 10.2.2. android ??? Oreo? I do not remember
Click to expand...
Click to collapse
Check your firmware version in about section. Last oreo version was 9.3.14.
ok it works now
I used miflash ====> flashing the rom stock development 9.5.9 Pie
windows powershell ====> fastboot boot twrp-3.3.0-0-whyred.img
in twrp format date wipe >> advanced wipe >> wipe system data cache and dalvik cache
Reboot to twrp recovery once again
Flash custom ROM
:good:
thank you all very much
ancer said:
first of all thank you
but
stock rom is global 10.2.2.0?
Is it dangerous for roll-back?
now I don't have any roms inside the phone
Click to expand...
Click to collapse
Don't worry i was on the same situation as you are on right now and i did as what i told you and my device is back. Or As last try install latest Pitch Black Recovery from source forge
01Thesam said:
Don't worry i was on the same situation as you are on right now and i did as what i told you and my device is back. Or As last try install latest Pitch Black Recovery from source forge
Click to expand...
Click to collapse
sir, can you give me the link of the Oreo firmware that you flashed? thanks
goodygoods said:
sir, can you give me the link of the Oreo firmware that you flashed? thanks
Click to expand...
Click to collapse
Follow this steps to flash any custom roms, after Miui 10 Pie without any errors - ( USE ONLY PITCHBLACK RECOVERY ).
1. Go to recovery, Wipe data, cache, vendor.
2. Now install, Firmware. ( around 50mb ).
3. Again wipe data, cache, vendor.
4. install rom.
5. install gapps.
6. Go to recovery
( SKIP THIS STEP, YOU CAN USE LAZY FLASHER )
- advance.
- tools.
- Dm-verity.
- install.
7. wipe dalvik cache.
8. reboot.
ENJOY
Firmware Link : http://bit.ly/2I6XIxE
01Thesam said:
Follow this steps to flash any custom roms, after Miui 10 Pie without any errors - ( USE ONLY PITCHBLACK RECOVERY ).
1. Go to recovery, Wipe data, cache, vendor.
2. Now install, Firmware. ( around 50mb ).
3. Again wipe data, cache, vendor.
4. install rom.
5. install gapps.
6. Go to recovery
( SKIP THIS STEP, YOU CAN USE LAZY FLASHER )
- advance.
- tools.
- Dm-verity.
- install.
7. wipe dalvik cache.
8. reboot.
ENJOY
Firmware Link : http://bit.ly/2I6XIxE
Click to expand...
Click to collapse
Thank you so much sir, this helps a lot! :good:
goodygoods said:
Thank you so much sir, this helps a lot! :good:
Click to expand...
Click to collapse
Welcome man !
01Thesam said:
Welcome man !
Click to expand...
Click to collapse
sir I tried flashing lazyflasher but there was an error so I wanna try that advance > tools stuff but when I go to advanced there is no tools option
goodygoods said:
sir I tried flashing lazyflasher but there was an error so I wanna try that advance > tools stuff but when I go to advanced there is no tools option
Click to expand...
Click to collapse
Use pitch black recovery and if still got error then don't worry no need to flash lazy flasher
So I have followed this guide https://github.com/tkchn/daisyinstall to install custom ROM, but I always get this error, k install device open error. Can anyone give me other instructions?
itwasmistake said:
So I have followed this guide https://github.com/tkchn/daisyinstall to install custom ROM, but I always get this error, k install device open error. Can anyone give me other instructions?
Click to expand...
Click to collapse
Assuming that you've unlocked the bootloader and properly installed ADB drivers:
Boot to fastboot
Type: fastboot boot X:/location_of_Offain_TWRP.img
Tap cancel
Go to wipe, then format data, then type yes, then enter.
Go back to the Wipe menu, Wipe Cache, Data, System, Internal storage
Go back to TWRP Menu
Flash the ROM you want to install
Flash the TWRP Installer
Then go to reboot menu
Change slot (A to B or B to A)
Then Reboot to Recovery
Then flash Force Encryption Disabler
Flash Magisk
Flash GApps
Then finally, reboot system.
RFD80M-75679 said:
Assuming that you've unlocked the bootloader and properly installed ADB drivers:
Boot to fastboot
Type: fastboot boot X:/location_of_Offain_TWRP.img
Tap cancel
Go to wipe, then format data, then type yes, then enter.
Go back to the Wipe menu, Wipe Cache, Data, System, Internal storage
Go back to TWRP Menu
Flash the ROM you want to install
Flash the TWRP Installer
Then go to reboot menu
Change slot (A to B or B to A)
Then Reboot to Recovery
Then flash Force Encryption Disabler
Flash Magisk
Flash GApps
Then finally, reboot system.
Click to expand...
Click to collapse
This didn't work for me, i tried flashing 3 different custom roms for my mi a2 lite, installed 2 different rec, tried wipeing everything yet i still get the error.
lauwiedweep said:
This didn't work for me, i tried flashing 3 different custom roms for my mi a2 lite, installed 2 different rec, tried wipeing everything yet i still get the error.
Click to expand...
Click to collapse
i don't remember where but you have to search for the modified twrp, i think is on the guide of installing custom rom
The official ones don't work for a10 and posterior versions
Kaimilo said:
i don't remember where but you have to search for the modified twrp, i think is on the guide of installing custom rom
The official ones don't work for a10 and posterior versions
Click to expand...
Click to collapse
I don't know about the android 10 as i always flash it via fastboot with an automatic installer
lauwiedweep said:
I don't know about the android 10 as i always flash it via fastboot with an automatic installer
Click to expand...
Click to collapse
you can see if it's android 10 when you are downloading the rom version
What rom are you aiming for?
Kaimilo said:
you can see if it's android 10 when you are downloading the rom version
What rom are you aiming for?
Click to expand...
Click to collapse
Aosp android 11 or do you mean specific?