hello...i can't turn on my note. i can only enter in download mode. i tried to flash again the twrp but it gives me the error: there is no pit partition, and it fails.
is there something i can do? i also tried to flash a new pit file found here, but it fails too...can you help me, or is it a hardware problem?
Related
I recently purchase a korean note 2 lte, and I try to flash a custom rom via odin and I must have ticked nand erase by accident , now when I try to flash a stock rom it keep asking me for a pit. I have been searching for a pit file over a week but no luck, can someone help? now tje phone can only go in to download mode and nothing else.(sorry my english is not that good)
anyone help?
please any help would be greatly appreciated
As much as Kies is hated, an emergency recovery using it will fix this problem.
I tried using kies but it won't even connect. thanks for the help.
Kies didn't connect for me when I had this problem, either. Going to the emergency recovery option worked fine.
sal
Hello, i have a E250L 32G, power only in download mode, need to be repartition. I need a pit file from the same device.
Maybe an E250L user can manage to read this pit file from a good phone, in adb mode or hemidal.
Any help will be apreciated....thanks
.
Plss i am disperate, i need badly pit file partition for SHV-E250L 32G note 2 [email protected]. thx.
.
With this software you can extract PIT a functional phone
http://forum.xda-developers.com/showthread.php?t=1308546
.
PRODUCT NAME: SHV-E250L
CUSTOM BINARY DOWNLOAD: Yes (23 counts)
SYSTEM STATUS: Custom
I gave the command delete the partitions inside the adb shell. it shows me now download mode, connect to Odin's drivers. I ask for flash pit file.
.
I need help please, because I can't get my new prestigio 4500T turn on.
I first did the CWM recovery in this site, androidforum.cz/pro-pap4500t-dc-1-2ghz-s-jb-4-1-1-t38976.html
and it was all ok.
But then I wanted to remove the CWM recovery of my phone, because I had some problem updating my phone to the new rom because of it,
and I went to the same program I installed CWM recovery, Smart Phone Flash Tool, and I put the same scatter file I used to install, and instead of clicking on download I clicked Format, and then format whole flash, because it was there that I would take CWM recovery of my phone.
Now I can't turn my phone on, when I connect usb at pc, it connects and disconnects a lot of times. I even tried to do the same steps to download the CWM recovery on my phone but in SP Flash Tool I get this error: BROM ERROR: S_DL_GET_DRAM_SETTING_FAIL (5054)
[HINT]: Please check your load matches to your target which is to be downloaded.
I don't know what to do and please Help me. Thanks
Nobody answers? Please can anybody help me?
ddqgarces said:
I need help please, because I can't get my new prestigio 4500T turn on.
I first did the CWM recovery in this site, androidforum.cz/pro-pap4500t-dc-1-2ghz-s-jb-4-1-1-t38976.html
and it was all ok.
But then I wanted to remove the CWM recovery of my phone, because I had some problem updating my phone to the new rom because of it,
and I went to the same program I installed CWM recovery, Smart Phone Flash Tool, and I put the same scatter file I used to install, and instead of clicking on download I clicked Format, and then format whole flash, because it was there that I would take CWM recovery of my phone.
Now I can't turn my phone on, when I connect usb at pc, it connects and disconnects a lot of times. I even tried to do the same steps to download the CWM recovery on my phone but in SP Flash Tool I get this error: BROM ERROR: S_DL_GET_DRAM_SETTING_FAIL (5054)
[HINT]: Please check your load matches to your target which is to be downloaded.
I don't know what to do and please Help me. Thanks
Click to expand...
Click to collapse
You messed up boot file.Try to find original boot.img here on XDA and try to flash it via PC,or find original stock rom for flashing via SPFlashTool try that
jaskooo said:
You messed up boot file.Try to find original boot.img here on XDA and try to flash it via PC,or find original stock rom for flashing via SPFlashTool try that
Click to expand...
Click to collapse
Thanks for your help, I have a boot.img of the stock rom, I put in the same folder of MT6577_Android_scatter_emmc and CheckSum.ini , but when I try to download via SP flash tool I get this error:
Image Bootimg checksum failed! Checksum reference value (0x5583) in the config.ini file.
Please re-fill correct checksum values in checksum.ini.
I don't know what are the checksum values, can you tell me where i can find these values?
I am getting this DRAM error, because I don't have the correct files to flash in SP flash tool.
Please can you give me all those files needed to put a whole new firmware in y phone, I need the preloader file, and etc.
My phone can't detect preloader, as it did, and I can't boot it, it's like dead, only appears a red light when I connect to pc and a MTk USB Port (COM).
Please help me with the files needed to flash my whole phone in sp flash tool
Need full ROM with scatter file
Hi Guys, I am looking for full ROM including scatter file for PAP4500T. I need it to load all needed (Preloader, MBR, EBR1, UBOOT, BOOTIMG, RECOVERY, SEC_RO, LOGO, EBR2, ANDROID, CACHE, USRDATA) in to the SP Flash Tool. It can be from Stock or any working ROM. If You could provide me Working ROM with all these and with scatter file which will load everithink to the SPflashTool I would really appreciate that.
Thank You in advance.
HI
I have a Samsung galaxy tab 3 lite SM-T111 and the tab had a problem about /efs invalid argument.
i was tried to fixed it already by install twrp recovery and the efs is worked but after i flashed back to stock firmware THL-T111XXUANB2 after pass on odin it suddenly showed
E: /system invalid
/cache invaild argument
then switch off automatically.
Now my device is stuck on factory mode only and even i tried to firmware restore by odin it shows nand write start failed. I tried to restored with pit file also it let pit file pass but when it started to flash firmware it failed on nand write start!
it that anyway to fix it guys?? May be my pit file is wrong or something happening. So pls let me know guide way to fix it. I hope that wont be emmc chip error.
Thanks you guys.
no one want to help..
help samsung sm t111 flash failed
kohtoo said:
no one want to help..
Click to expand...
Click to collapse
help me
kohtoo said:
HI
I have a Samsung galaxy tab 3 lite SM-T111 and the tab had a problem about /efs invalid argument.
i was tried to fixed it already by install twrp recovery and the efs is worked but after i flashed back to stock firmware THL-T111XXUANB2 after pass on odin it suddenly showed
E: /system invalid
/cache invaild argument
then switch off automatically.
Now my device is stuck on factory mode only and even i tried to firmware restore by odin it shows nand write start failed. I tried to restored with pit file also it let pit file pass but when it started to flash firmware it failed on nand write start!
it that anyway to fix it guys?? May be my pit file is wrong or something happening. So pls let me know guide way to fix it. I hope that wont be emmc chip error.
Thanks you guys.
Click to expand...
Click to collapse
U are using tab 3 neo SM-T111 if are using any rom in this tab so plzz help me I also want to flash a ROM in my tab I am also using tab 3 s
Smt111
Use Odin v3.07 and check Nand Erase All
Symptoms:
1. Boot loop. GT-N7102 logo comes and the device reboots.
2. Can go to download mode. Model no. GT-N7102 is visible
3. Recovery mode-Android shows up for ~4 seconds and then phone reboots and goes into a boot-loop.
Was running N7102ZCUEOJ1_JB43_deodex_gapps_root_noknox_lite_by _neopunk88 (since March'16), when the phone suddenly decided to go into a boot-loop.
The phone was rooted. I had installed LSpeed the previous night and had set it to run in recommended mode.
What I have tried so far
1. Odin 3.07, 3.09 etc
2. stock recovery flash fails
2. tried to flash N7102ZCUEOJ1_N7102CHNEOJ1_N7102ZCUEML1_HOME.tar.md5 (last stock), but fails
3. After I had exhausted possibilities, tried the following pit files, one at a time, first from here and then here and then here along with the stock ROM. All pit files seem legit and the correct ones, but I have no way to verify. I have tried first without and then with re-partition option selected in Odin. Flash fails.
4. All drivers, USB ports and cable okay as I can flash my wife's S6.
Phone still going into download mode.
Odin fail modes
1. without pit file, while flashing either recovery or stock rom, Odil fails just after sboot.bin at NAND write-start.
2. with pit file and re-partition checked, Odin gets stuck in "get pit file for mapping"
3. with pit file but re-partition unchecked, Odin fails is the same as (1)
4. I have tried setting Odin compatibility to XP but it does not result in anything different. I haven't needed xp compatibility setting this while flashing anything before.
Please could I have some guidance on what options I have left and the files, if I am not using the correct ones?
My belief is that if I can get to the download mode, there has to be way to un-brick the phone..fingers crossed.
Thanks in advance.
UPDATE: Fixed phone by replacing the motherboard from here. Everything working fine now.
still waiting for a response..
@jam_27 It is possible that eMMC got corrupted. (it's a hardware fail)
If I were you I would try to flash TWRP. http://www.twrp.me - For N7100, as it doesn't matter for recovery.
READ: http://forum.xda-developers.com/galaxy-note-2/help/nt7100-wont-boot-wont-charge-recover-t3504290
Thanks, TWRP recovery flash fails at NAND write start.
jam_27 said:
Thanks, TWRP recovery flash fails at NAND write start.
Click to expand...
Click to collapse
Below the JTAG tool report from FoneFunShop UK
eMMC Flash Memory Chip is damaged
===============
= JTAG REPORT =
===============
Open serial port...OK
Connecting to the RIFF Box...OK
Connecting to the dead body...OK
Detected dead body: DETECTED
Set I/O Voltage reads OK, TCK Frequency is OK
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Flashing the dead body...
No Resurrection Data is available for the eMMC Chip with Capacity = 0B
ERROR: Failed use to Resurrection Data for the eMMC Chip with Capacity = 0B
ERROR: Selected FLASH Chip was not initialized by the DCC Loader.
----
I wont be able to replace the emmc chip myself (don't have the correct tools) but should be able to replace the motherboard.
Any other suggestions before I open up the until.
Hello!
I have a T315 and I have broken the partitions.
Save for a lot of rom that you put, if esque I get ... (why not all leave me). It does not finish booting and stays in the samsung logo. And if I enter the recovery stock I see that it can not mount any partitions.
So what I need is the PIT file to fix that problem, right?
Anyone know where to get it please?