Is it possible to recover my motherboard, a similar process has been done with nexus 5.
https://forum.xda-developers.com/go...k-nexus-5-stucked-qualcomm-hs-t3043301/page19
Looking for a rooted device reset to factory settings to create an image.
Related
I was trying to install TWRP on my LG G3 (D850) and somehow got it so it would only show up as a Qualcomm HS-USB QDLoader9008 Device on my pc with no screen on and no way to get to any DL Mode.
I followed the directions from http://lgg3root.com/lg-g3-root/how-to-unrootunbrick-lg-g3/ and used the LG Smart Boot Diagnosis Tool (1.3.1) to get it back to be able to boot but as soon as I run the LG Flash Tool again and it resets I'm back to the no screen and only being identified as a "Qualcomm HS-USB QDLoader9008 " device via USB. I have done this 3 times now and still getting the same result. I rerun the Anti RollBack software and then try to flash again but it always does the same thing.
Is there something I am missing?
Thanks
Hi,
After I took a picture with my camera, my Nexus started to go into a bootloop. I forced it to shutdown by going to the bootloader and choosing shutdown. I later on wanted to start the mobile, but it would sometimes just crash instantly or show the google screen and crash. I tried flashing a 4 core boot image, as that might solve it, but instead it wouldn't boot either. I also had to flash a TWRP recovery optimized for the 4 core boot image. If I finally got into the bootloader, selecting recovery will just crash after a few seconds. I tried to flash the 1 core boot image, as I hoped that might solve it, but made matters worse. I cannot start it, nor can I get into the bootloader. When I connect the phone however, it shows up as an Qualcomm HS-USB QDLoader 9008. I tried LG UP as suggested, but that doesn't recognize my phone. I decided to try LG Flash Tool, but it will always fail..
I don't know what to do anymore, please help!
Hi durning flashing factory image i have bricked my phone. I did factory reset in recovery mode and after that i get stuck in bootloop, so i tryied flash factory img via fastboot not the first time. Then i get stuck in bootloop and couldn't access recovery mode or download mode. Phone didn`t wake up after few reboots when i used flash_all command(i did this many times with no problem) so i unpluged usb cable after few munutes if "waiting for device". Now phone is dead and only respond is when i plug it to pc in device manager it's found now as a "Qualcomm HS-USB QDLoader 9008". I have searched all internet and there is no thread about our razer phone. The very few methods and not for razer phone. My only hope that i think my work in this situation is use backup of 'mmcblk0.img' or "debrick.img" from a working device and try to flash it using sd card and "Win32 Disk Imager" Could somone pleas extract mmcblk0.img from its own working razer phone and share it to me/us here? Or if you have another idea pleas tell me. Ps:sorry for my english.
Unbrick project razer phone
Hi i have found company (if you google "arykstore") that deals with hardbrick issues as mine. They just started unbrick project on razer phone after my request for help. If they rise money to obtain working razer device they will extract and provide essential filles to resurrect any hardbricked razer phone
I have the same problem, only download mode available and flaahing is not working
The guy that I'm helping fix his phone had was successful in flash the abl files now it's in a boot loop. I'm trying to connect to LG up to flash the firmware but I can't have the computer recognize the phone. I've used pretty much every variation of lg up and LG flash tool and the computer is not recognizing the phone in download mode. Any ideas or suggestions anyone? I think I have downloaded and installed all the visual c++ distributable files. Even in device manager I change the com to com 41
Rootmaster906 said:
The guy that I'm helping fix his phone had was successful in flash the abl files now it's in a boot loop. I'm trying to connect to LG up to flash the firmware but I can't have the computer recognize the phone. I've used pretty much every variation of lg up and LG flash tool and the computer is not recognizing the phone in download mode. Any ideas or suggestions anyone? I think I have downloaded and installed all the visual c++ distributable files. Even in device manager I change the com to com 41
Click to expand...
Click to collapse
Instead of doing what you're doing, do the hard factory reset button combination, if you've installed a custom recovery.
Keno_I said:
Instead of doing what you're doing, do the hard factory reset button combination, if you've installed a custom recovery.
Click to expand...
Click to collapse
I can't. I can't access recovery or fastboot. I changed the active slot to a different one due to the fact I could not access download mode. And when I had the other slot active, it would boot to stock recovery and just hang. Then it bootloped again. I did the power button then volume up to enter recovery, but it looped.
Hi, thanks for helping me improve this process before I try it on my phone.
Model: OnePlus 7t HD1907 US Version
Situation: Had my OnePlus 7T auto-update to Android 12, causing a bootloop (1+ Logo -> T-Mobile - phone is unlocked). After about an hour, the phone switched slots to Qualcomm boot and Recovery mode. The phone and OnePlus support suggest I just factory reset, and wipe years of precious data. I had a google photos auto backup but there are plenty more things I need on this phone. So I'm looking into doing a backup first.
Note that I understand the risks with these processes, and I'm looking to minimize them by having the most accurate process down.
What I tried:
I tried adb pull, the phone isn't recognized, regardless of drivers
Fastboot TWRP: Phone is recognized and fastboot works to reboot, but not to boot into TWRP because the phone's bootloader is locked. `Fastboot OEM unlock` also fails.
What I'm trying to do now, and please help me tune it/improve it:
Use Qualcomm HS-USB QDLoader 9008 drivers for the connected phone and get QPST tool.
Try to boot the 7T into EDL mode (still have to figure this out)
In Device Manager, check if "Qualcomm HS-USB QDLoader 9008" is under "Ports (COM & LPT)".
On QPST Configuration, click on the "Ports" tab, then "Add New Port" and enter the corresponding COM port number.
Click on "Start Clients" tab and got to Back Up.
Set the backup options, start it and wait for the img to download.
After this I plan to use to whatever best tool to extract the img and access the files, then go ahead with the factory reset.
Can you help me make this process more clear and precise for my specific phone? Thanks.
You posted in the wrong section but try https://forum.xda-developers.com/t/...l-to-restore-your-device-to-oxygenos.4004005/
kjullian19 said:
Hi, thanks for helping me improve this process before I try it on my phone.
Model: OnePlus 7t HD1907 US Version
Situation: Had my OnePlus 7T auto-update to Android 12, causing a bootloop (1+ Logo -> T-Mobile - phone is unlocked). After about an hour, the phone switched slots to Qualcomm boot and Recovery mode. The phone and OnePlus support suggest I just factory reset, and wipe years of precious data. I had a google photos auto backup but there are plenty more things I need on this phone. So I'm looking into doing a backup first.
Note that I understand the risks with these processes, and I'm looking to minimize them by having the most accurate process down.
What I tried:
I tried adb pull, the phone isn't recognized, regardless of drivers
Fastboot TWRP: Phone is recognized and fastboot works to reboot, but not to boot into TWRP because the phone's bootloader is locked. `Fastboot OEM unlock` also fails.
What I'm trying to do now, and please help me tune it/improve it:
Use Qualcomm HS-USB QDLoader 9008 drivers for the connected phone and get QPST tool.
Try to boot the 7T into EDL mode (still have to figure this out)
In Device Manager, check if "Qualcomm HS-USB QDLoader 9008" is under "Ports (COM & LPT)".
On QPST Configuration, click on the "Ports" tab, then "Add New Port" and enter the corresponding COM port number.
Click on "Start Clients" tab and got to Back Up.
Set the backup options, start it and wait for the img to download.
After this I plan to use to whatever best tool to extract the img and access the files, then go ahead with the factory reset.
Can you help me make this process more clear and precise for my specific phone? Thanks.
Click to expand...
Click to collapse
Did you manage to save the data and boot the phone again ?