I was installed linage os bt. While I was connect to any wifi network it's connect & disconnect
Second problem is..- while flashed hall1 zip file its showing like that....while it's flashed a new ROM
Related
I cant connect to ad-hoc wifi network, it is well known software android problem at all devices but i tried like this links:
exop.pro/blog/2010/08/15/ad-hoc-support-for-android
szym.net/2010/12/adhoc-wifi-in-android/
when i replace wpa_supplicant, wifi seems doesnt work, i cant find any wifi network (ap or ad-hoc)
please help
I tried creating ad hoc wifi network in my laptop for my defy but failed. The phone did not detect the network. Then I installed connectify instead and it works faultlessly.
Is there any adhoc patch for defy?
*wrong post deleted*
I can connect defy with my laptop without installing any other software. But I'm not sure if it is a ad-hoc network. My laptop wifi driver provide a special ap mode and it can be used to share network.
netten123321 said:
I cant connect to ad-hoc wifi network, it is well known software android problem at all devices but i tried like this links:
exop.pro/blog/2010/08/15/ad-hoc-support-for-android
szym.net/2010/12/adhoc-wifi-in-android/
when i replace wpa_supplicant, wifi seems doesnt work, i cant find any wifi network (ap or ad-hoc)
Click to expand...
Click to collapse
Same here. I tried all the patches of wpa_supplicant given in this thread as well: http://forum.xda-developers.com/showthread.php?t=755254 but the wifi just can't search for any network and it turns off itself.
Another member "webvan" tried the above steps on his Milestone and failed(from the above thread).
Seems like Moto has a different hardware config.
FYI, I'm running 2.2.2 custom rom (http://forum.xda-developers.com/showthread.php?t=1037076)
What a tragedy.
It seems there's no such patch for Defy.
for me it worked with 3.4.2_177-005_NORDIC rom which i used for a very long time.
the problem is, you must manually connect to an ad-hoc network.
if you don't want to do that each time, you can install cyanogenmod by quarx and it will automatically connect to your saved ad-hoc network
Maybe you should try update to 2.2/2.3 based rom.
Fyi, i'm now at MIUI rom & got no problems with ad-hoc wifi network.
Dont forget to activate Internet Connection Sharing (for windows user), just to assure your device got IP Address automatically.
P.S Sorry for my bad english
Ok, I know someone will tell me this thread doesn't belong to the dev section, but it does.
THIS IS NOT ABOUT WIFI TETHERING - READ CAREFULLY!!!
There has been adhoc support in CM 7 for the G1 (Htc Dream) I used to own and it worked just fine with my laptop AdHoc connection.
There seems to be a problem with most AOSP and GB STOCK(ish) roms - including Darky and CM 7.1 Stable. They seem to detect the adhoc network when a modded wpa_supplicant is installed (in Darky it's installable by the Darky App and in CM it is included in the stock rom). When trying to connect there are two scenarios :
1. I don't specify IP address and Gateway and rely on the windows DHCP to assign an address.
What happens in most roms is the phone hangs on waiting for IP address and never connects. In MIUI roms the phone connects instantly, so I guess the issue is rom related.
2. I specify IP address (the laptop is 192.168.231.1, so I choose 192.168.231.2 for the phone, and the laptop IP for DNS and Gateway)
What happens in most roms is the phone just disconnects instantly giving no reason and continues scanning. I've actually managed to connect in some roms (CM 7.1 and Darky) but it happens to be very unstable - the wifi keeps on scanning for new networks and even if the phone is connected, there is no actual internet coming through. [EDIT] I flashed the latest CM Nightly and the connection worked flawlessly.
I have ran some logcats but they don't show significant information on what's actually happening.
My idea is to put some of the MIUI binaries into use, but I don't know which ones, except the wpa_supplicant are responsible for WIFI. Can some of you developers help me and possibly make an All-Types-Of-Roms solution.
[EDIT] The Adhoc Connection seems to beworking in latest CM Nightlies. There seems to be something different in AOSP roms like CM, that makes Adhoc connection work flawlessly. Any idea what is it?
Hi,
my Oneplus 3 does not connect to any wifi network anymore. After typing to correct wifi key the device says 'Connecting' and then 'Deactivated'. MAC-address is there.
What I have tried:
Reset
Tried Lineage OS
Reinstallation of orginal Oxygen OS
Flashed firmware+modem of Oxygen OS
Any suggestions would be appreciated!
Hi People!
I looked around a lot but couldn't find anything similar or helpfull.
I upgraded S5 G900F klte from LineageOS15.1 to 16.0' --> SIM Slot wasn't detected.
So I downgraded again to 15.1 but the same problem occured (but it hadnt before).
Then I installed 16.0 klteduos - now there is SIM detection (is that the right word?) i enter a PIN but still no network connection is established, no networks can be found and when I'm searching automatically it's saying sth like. " network connection currently impossible. pls try again later"
In the process of up and downgrading I did some complete data / cache wipes.
SIM is not the problem since its working in other phones, but other SIMs won't work in the S5.
Thanks for your help! beechlea
Hi all, I have a brand new Xiaomi Mi A2 Lite phone with Stock ANDROID one firmware.
Android Version: 9 pie
Security patch: 5 February 2019
I have just Unlocked bootloader, flashed TWRP and Magisk, but I'm running on stock firmware.
I have the following ISSUES:
ISSUE 1 - When tethering a wifi signal, all my mobiles devices can connect and navigate, except for my working device, a Mac running OSX 10.9.5.
When I try to connect the signal, I type the password and the system gives back INVALID PASSWORD, even if the password is correct.
I found HERE ( https://discussions.apple.com/thread/4580644 ) and here ( https://apple.stackexchange.com/que...ection-has-password-issue-with-my-macbook-pro ) that the problem is due to the fact that OSX misunderstand a 2.4 GHz signal with the 5 GHz.
I've double checked and the HotSpot Wifi is a 2.4 GHz signal.
Switching to 5GHz and than back on 2.4 GHz does not work
Rename the hotspot does not work
Changing the password does not work
Rebooting does not work
Adding manually the WiFi SSiD and password in OSX Network preference does not work.
I'm out of ideas, and the Macbook with OSX is my working device, so I need tethering on the go.
Didn't try with Bluetooth or USB tethering.
ISSUE 2 - I have 2 sims, when tethering from SIM 1, the devices that works with my hotspots are able to navigate witouth problems.
when moving the data from SIM 1 to SIM 2, the tethering does not send data, and i'm unable to navigate.
Any help and suggestion is really appreciated, i don't want to switch to LINEAGE due to the fact that I have just set up the stock rom with my personal apps
Any news or suggestion on how to solve those issues?
I was able to make it work with MAC OSX without WPA2 Personal password, leaving WiFi open.
The problem is that I work in a School, so there is an high risk of students to connect to my personal hotspot, how can I force to only be 1 device to be connected? It was possible with AOSP Kitkat, why is not possible with Pie?
Any Magisk or Xposed module?
I have the same issue with OS X 10.13.6.
No problem with paranoid android pie beta but can't use tethering with stock firmware.