Related
Hi every one !
I'm using the Belgian firmware with a Wave 2 TLBLB1 and I'm getting some strange errors after an upadte :
- The boot screen is reversed
- The boot animation is played in reverse
(just annoying)
- After doing the Samsung apps update it can't launch it says : " Impossible to launch (...) invalid app"
I tried several times to hard reset and recover a clean bada but after each samsung apps update the same error appear.
Does some know from where those errors come from ?
Thanks in advance.
Solution :
- Do a hard reset
- Don't recover your settings files and apps
- Do the update
Solution 2, thanks to mylove90 :
-Try removing it by deleting its folder with TK file explorer (edit ini file to make it work with bada 2.0)
-Copy Samsung Apps.oap file....i'll assume you know the path of that file
-Open it with 7z or any other program
-Edit manifest.xml file to give it higher version number
Click to expand...
Click to collapse
Are you updated your phone via OTA ?
Yes it was an OTA update. But apart from the bug I listed, everything works fine.
Exactly Don't know about samsung apps but Reversed also for me as this
http://forum.xda-developers.com/showpost.php?p=25923810&postcount=119
hahahahahahahahaha
These bugs are so funny
Thanks to Samsung we don't have OTA updates in Egypt
But i guess that you just got a bad Samsung Apps update
-Try removing it by deleting its folder with TK file explorer (edit ini file to make it work with bada 2.0)
-Copy Samsung Apps.oap file....i'll assume you know the path of that file
-Open it with 7z or any other program
-Edit manifest.xml file to give it higher version number
In Theory , This should prevent the update & make your Samsung Apps work
Best Regards
Yeah it's exactly the same... It should be normal for Samsung that the phone boot that way...
Could it be a general error from the OTA system update ?
For the samsung apps I expect the same bug since it was also with an OTA update.
Edit : yes I will try later this method I don't have time to do it right know I will report when I did it.
Edit 2 : So I hard reset and try again to update and it works even after the update. But after recovering my files it bugs. I will try to recover before updating.
Just a simple/noob question how do you express the files into a .oap file ?
Edit 3 : WTF it works. It should have been a setting error. Strange.
This is NO bug...
This is VISUAL teststuff...
Firmware like XXKKV... XXLAV, XXLBV
These are for internal testing... it is easier to see if success, instead wait and enter *#1234#
Read here:
http://forum.xda-developers.com/showthread.php?t=1363328
Remember... as V is highest "Character/Digit"... Kies nor OTA update again...
You have minimum to flash other apps_compressed.bin with Multiloader.
Best Regards
adfree said:
This is NO bug...
This is VISUAL teststuff...
Click to expand...
Click to collapse
Thanks I didn't know.
Anyway it works great. I'll wait untill next firmware.
Hi i am currently using Huawei Ascend P6,
my version was P6-U06, B107, and can anyone teach me how to update it to 4.4.2 android kit kat?
Please guide.. Thanks!!!
Hi! You should install b132 firmware (extract downloaded file>make 'dload' folder on your external sd card and put UPDATE.APP into dload then go to settings>about phone>system updates> make backup(optional) and apply and the phone will do the rest (cca15min)) and when you are on b132 do the same with b510 firmware. You can download it from offical huawei site or from here http://forum.xda-developers.com/show....php?t=2782496
n00b_user said:
Hi! You should install b132 firmware (extract downloaded file>make 'dload' folder on your external sd card and put UPDATE.APP into dload then go to settings>about phone>system updates> make backup(optional) and apply and the phone will do the rest (cca15min)) and when you are on b132 do the same with b510 firmware. You can download it from offical huawei site or from here http://forum.xda-developers.com/show....php?t=2782496
Click to expand...
Click to collapse
that link is not available please any other mirrors for b510 ktkt
vennyvenance said:
that link is not available please any other mirrors for b510 ktkt
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2782496
---------- Post added at 01:21 PM ---------- Previous post was at 01:06 PM ----------
https://mega.co.nz/#!kd0kQJba!iQJsijbnwWnyH2zKBPxu35MbO7xBS3cFlzTH4LFYY70
If you get an error FAIL try this one.
Errors
Sent from my HUAWEI P6-U06 using XDA Free mobile app
Ascend P6U06 update from B107 to B510
n00b_user said:
Hi! You should install b132 firmware (extract downloaded file>make 'dload' folder on your external sd card and put UPDATE.APP into dload then go to settings>about phone>system updates> make backup(optional) and apply and the phone will do the rest (cca15min)) and when you are on b132 do the same with b510 firmware. You can download it from offical huawei site or from here http://forum.xda-developers.com/show....php?t=2782496
Click to expand...
Click to collapse
Hi. I am currently using ascend B132 android version 4.2.2 . Initially I had the same issue, I was on B107 and wanted to update it to Kitkat inorder to gain some advancements regarding camera lens. SO I read your post and followed all of your steps. I extracted the B132.zip file and moved the UPDATE.APP file to a folder named dload in my SD card, installed it and it worked. (Y) But now that I have to upgrade to B510, I have no clear instructions after doing hours of research. You stated to follow the same method for the upgradation of B510 but many sites say that it should not be extracted and just rename it to UPDATE.ZIP and paste it to the dload folder. Considering the fact that i still have my UPDATE.APP file (from the previous step of upgrading to B132) in the dload folder, I should paste the UPDATE.ZIP (for B510) in the same folder or remove the UPDATE.APP
I have tried both methods, but as one site says when UPDATE.APP is not present in the folder containing UPDATE.ZIP, android fails to recognize any update and it aborts. whereas, when UPDATE.APP is there too, it just installs the B132 (from the update.app) again and kinds of overlooks the update.zip for B510 and hence there is no update to B510. Kindly, provide me with the steps of installing B510. I have listed all of the problems I am experiencing.
There shouldnt be zip files in the folder. Extract the update.app from the zip file for b510 place it in the dload folder on the sd card an make the update.
Sent from my SM-G850F
tileeq said:
There shouldnt be zip files in the folder. Extract the update.app from the zip file for b510 place it in the dload folder on the sd card an make the update.
Sent from my SM-G850F
Click to expand...
Click to collapse
The zip file of B510 just don't get extracted and an error occurs. Furthermore all of the other websites states not to extract it, just to rename it as update.zip and put it in dload. does not works.
Dying to update.
Let me check if i have the b510 or b512 update in my comp and ill try to upload it. Then you can work as i said before.
Sent from my SM-G850F
https://mega.nz/#!wwE0iA5T!az1V22ZO_9oBSdcmL7X6Fk7CIWBLEg2rEVsPJCmK_d8
Sent from my SM-G850F
About the download link
Sent from my SM-G850F[/QUOTE]
Thankyou so much. But i think I downloaded from the very same webpage. However, I will give it a try.
Please illustrate clearly whether I have to zip the 510 file. And secondly, The update app file of B132 shouldn't be placed in dload while upgrading?
AND MOST IMPORTANTLY, DOES THIS FILE GETS EXTRACTED?
From the link i gave you, you should be able to get a zip file. Extract the zip and see if there is a file called updeta.app. Once you have that file place it in dload folder on sd card and start the update with the three button method.
Sent from my SM-G850F
tileeq said:
From the link i gave you, you should be able to get a zip file. Extract the zip and see if there is a file called updeta.app. Once you have that file place it in dload folder on sd card and start the update with the three button method.
Sent from my SM-G850F
Click to expand...
Click to collapse
File can't be extracted. It says unknown method in dload/UPDATE.APP
Really can't help myself. Have searched nearly thousand blogs, all say not to extract it. But that method don't work as well. :crying:
billmunawar123 said:
File can't be extracted. It says unknown method in dload/UPDATE.APP
Really can't help myself. Have searched nearly thousand blogs, all say not to extract it. But that method don't work as well. :crying:
Click to expand...
Click to collapse
Ok then are you willing to try b708?
Sent from my SM-G850F
tileeq said:
Ok then are you willing to try b708?
Sent from my SM-G850F
Click to expand...
Click to collapse
The User-interface seems pretty good. Please tell me that is this release of B708 for P6 huawei's an official one by the makers of huawei?
Secondly, Is it lollipop or Kitkat?
Lastly, I'm concerned with the speed of the phone, Will it be affected largely?
And If we're good to go, Kindly guide me with the steps and also the requirements for Installing this B708. And most importantly for upgradation of p6 to B708 , it should be running a particular firmware first like B707 but I have B132 so what I have to do. Stuck so badly,
Regards
Well first, it is an official update from huawei but it was only released in china. Because of that you will find some chinese apps in the system but they wont make any problems for the experience with working on the phone. It is kitkat since our beloved P6 didnt get lolipop update and probably wont in future. About performance it will show some improvements, but thats my opinion since ive read on this forum that some arent satisfied with the overall update. And for the proccess of upgrading it is written on their official site that the recomended steps are that you get b508sp2 first and then go to b708. As for b707 i wouldnt suggest it since it still has bugs.
Sent from my SM-G850F
---------- Post added at 00:25 ---------- Previous post was at 00:21 ----------
Let me get working links and ill post it here. For both b508sp2 and b708
Sent from my SM-G850F
tileeq said:
Well first, it is an official update from huawei but it was only released in china. Because of that you will find some chinese apps in the system but they wont make any problems for the experience with working on the phone. It is kitkat since our beloved P6 didnt get lolipop update and probably wont in future. About performance it will show some improvements, but thats my opinion since ive read on this forum that some arent satisfied with the overall update. And for the proccess of upgrading it is written on their official site that the recomended steps are that you get b508sp2 first and then go to b708. As for b707 i wouldnt suggest it since it still has bugs.
[/COLOR]Let me get working links and ill post it here. For both b508sp2 and b708
Okay Thanks for sharing all the information. And lastly do you have to be on a specific Firmware as well for upgrading to b508sp2?
Waiting for the working links and the method of installation.
Click to expand...
Click to collapse
How to Update
Flashing this update requires your phone to be already running B706/B707 EMUI 3.0 developmental firmware or B508 (U06)/ B508SP02 (T00) or B508SP03 (C00) EMUI 2.0 stable firmware on board.
Download the appropriate firmware on your computer and extract it.
Connect your Ascend P6 to the computer in MTP mode over a USB connection.
Format the SD Card in FAT32 filesystem and make sure it has at least 2GB of free space.
Copy the “Update.app” package to “dload” folder of your SD Card.
Disconnect all the cables and completely turn off your phone.
Reboot into automatic upgrade mode by holding Volume Up + Volume Down + Power button for about 10 seconds. Release the Power button when your phone vibrates.
Let go of the Volume keys once your device begins to perform the upgrade.
It’ll take a few seconds to finish the process. Once you’re done reboot your phone normally and enjoy the update.
If SD Card update fails, transfer the dload folder with the update.app file in the internal storage and repeat the steps for updating.
https://mega.nz/#!DswQlAgJ - this is the first update file. In case it requires a key to download use this - !ig-p25rO1ev3CYBk6Js1LkaQ7nGT09-TDXpcaZFZI7I
https://mega.nz/#!ToIikSzR - this is the second. Same here - !lJWmd5KNEU9SravuHZg-pqGdJNGkd3xIv8lzYA58s3Y
Hi,
Lenovo Vibe K4 Note which was recently released in India got many OTA updates from Lenovo. This updates are available for users as soon as they connect their device to the internet. This update mainly includes bug fixes and software improvements.
Using ADB logcat, I captured the URL for downloading the update and updating the phone manually.
OTA 1 : This upgrades the phone from build number A7010a48_S143_151218_ROW to A7010a48_S147_160113_ROW.
Update Size : 283MB
URL : http://phonedl.ota.lenovomm.com/dls...OW_TO_A7010a48_S147_160113_ROW_WC542E0B8B.zip
Mirror : https://docs.google.com/uc?id=0BzJd5Ca5OlI3ZDZIR1E4Y05GdjA&export=download
Checksums :
MD5: 5e4d969c82426f2a5483dd5d58b573b3
SHA-1: 94dcfc29538984f6ef867191195d6e7fae86b69c
OTA 2: This upgrades the phone from build number A7010a48_S147_160113_ROW to A7010a48_S148_160201_ROW.
Update Size : 40MB
URL : http://phonedl.ota.lenovomm.com/dls...OW_TO_A7010a48_S148_160201_ROW_WC2A54CCF5.zip
Mirror : https://userscloud.com/qqsvk3nyv8t4
Thanks to @gursewak.10
OTA 3: This upgrades the phone from build number A7010a48_S148_160201_ROW to A7010a48_S150_160219_ROW.
Update Size : 38MB
URL : http://phonedl.ota.lenovomm.com/dls...OW_TO_A7010a48_S150_160219_ROW_WCBBBB28A6.zip
Mirror : https://userscloud.com/mnxxf6s4pmnu
Thanks to @gursewak.10
OTA 4 : This upgrades the phone from build number A7010a48_S150_160219_ROW to A7010a48_S152_160302_ROW.
Update Size : 34MB
URL : http://phonedl.ota.lenovomm.com/dls...OW_TO_A7010a48_S152_160302_ROW_WC5A28FDD3.zip
Mirror : https://userscloud.com/kdz3habbdrzf
Thanks to @gursewak.10
MARSHMALLOW UPDATE!!!
OTA 5 :This upgrades the phone from build number A7010a48_S152_160302_ROW to A7010a48_S214_160527_ROW.
Update Size : 1.62GB
URL : http://phonedl.ota.lenovomm.com/dls...OW_TO_A7010a48_S214_160527_ROW_WC04B2A0E0.zip
FULL ROM
This is a standalone ROM for this device. The version is S232.
URL : https://drive.google.com/file/d/0B0oTcPwt3IIDYWgxZlQ4NnFoNjg/edit
Installation Instructions :
1. Rename the downloaded zip file to "update.zip" using a file manager and place it in the root directory of the internal storage.
2. Power off your device.
3. Access the recovery by holding down the power key until the device vibrates and then pressing and holding the Volume Down and Volume Up buttons until the recovery screen appears.
4. Tap on "Install upgrade pack".
5. Tap on "Yes" when asked to "Install update.zip from internal or external sdcard".
This will start your installation and takes 8-15 minutes based on the number of apps installed.
Cheers,
abhish3k
Here is the link for 2nd 40mb update for the same
http://phonedl.ota.lenovomm.com/dls...OW_TO_A7010a48_S148_160201_ROW_WC2A54CCF5.zip
Or
Get the file here
https://userscloud.com/qqsvk3nyv8t4
Here is the next 38mb update link
http://phonedl.ota.lenovomm.com/dls...OW_TO_A7010a48_S150_160219_ROW_WCBBBB28A6.zip
Or you can easily download via any browser here
https://userscloud.com/mnxxf6s4pmnu
I'm using this stock rom s147, but unfortunately not able to update using this OTA
Sent from my Lenovo A7010a48 using XDA Premium 4 mobile app
You have to update your phone in sequences how the updates came.
Ist- 283mb
2nd-40mb
3rd-38mb
4th-34mb
You can't skip any previous update before installing newer update.
Hey, guys, can I install this on the brazilian version? Thanks.
abhish3k9 said:
Hi,
Lenovo Vibe K4 Note recently released in India, got an OTA update from Lenovo. This update is available for users as soon as they connect their device to the internet. This update mainly includes bug fixes and software improvements.
Using ADB logcat, I captured the URL for downloading the update and updating the phone manually.
OTA 1 : This upgrades the phone from build number A7010a48_S143_151218_ROW to A7010a48_S147_160113_ROW.
URL : http://phonedl.ota.lenovomm.com/dls...OW_TO_A7010a48_S147_160113_ROW_WC542E0B8B.zip
Mirror : https://docs.google.com/uc?id=0BzJd5Ca5OlI3ZDZIR1E4Y05GdjA&export=download
Checksums :
MD5: 5e4d969c82426f2a5483dd5d58b573b3
SHA-1: 94dcfc29538984f6ef867191195d6e7fae86b69c
OTA 2: This upgrades the phone from build number A7010a48_S147_160113_ROW to A7010a48_S148_160201_ROW.
URL : http://phonedl.ota.lenovomm.com/dls...OW_TO_A7010a48_S148_160201_ROW_WC2A54CCF5.zip
Mirror : https://userscloud.com/qqsvk3nyv8t4
Thanks to @gursewak.10
OTA 3: This upgrades the phone from build number A7010a48_S148_160201_ROW to A7010a48_S150_160219_ROW.
URL : http://phonedl.ota.lenovomm.com/dls...OW_TO_A7010a48_S150_160219_ROW_WCBBBB28A6.zip
Mirror : https://userscloud.com/mnxxf6s4pmnu
Thanks to @gursewak.10
Installation Instructions :
1. Rename the downloaded zip file to "update.zip" using a file manager and place it in the root directory of the internal storage.
2. Power off your device.
3. Access the recovery by holding down the power key until the device vibrates and then pressing and holding the Volume Down and Volume Up buttons until the recovery screen appears.
4. Tap on "Install upgrade pack".
5. Tap on "Yes" when asked to "Install update.zip from internal or external sdcard".
This will start your installation and takes 10-20 minutes based on the number of apps installed.
Cheers,
abhish3k
Click to expand...
Click to collapse
I had rooted my K4 and foolishly uninstalled "Cloud" and "step counter" as I did not like them. Now my phone throws FC randomly and annoys.
Would you know how to fix this? Thanks in advance.
new 33 mb update
Please provide a mirror link to download the new 33MB update.
Ankitchoudhary said:
Please provide a mirror link to download the new 33MB update.
Click to expand...
Click to collapse
Yes, of course...
Check the forums in the evening
Provide more info
marcopolo said:
I had rooted my K4 and foolishly uninstalled "Cloud" and "step counter" as I did not like them. Now my phone throws FC randomly and annoys.
Would you know how to fix this? Thanks in advance.
Click to expand...
Click to collapse
Well, it depends.... Which app is FCing ?
abhish3k9 said:
Hi,
Lenovo Vibe K4 Note which was recently released in India got many OTA updates from Lenovo. This updates are available for users as soon as they connect their device to the internet. This update mainly includes bug fixes and software improvements.
Using ADB logcat, I captured the URL for downloading the update and updating the phone manually.
OTA 1 : This upgrades the phone from build number A7010a48_S143_151218_ROW to A7010a48_S147_160113_ROW.
URL : http://phonedl.ota.lenovomm.com/dls...OW_TO_A7010a48_S147_160113_ROW_WC542E0B8B.zip
Mirror : https://docs.google.com/uc?id=0BzJd5Ca5OlI3ZDZIR1E4Y05GdjA&export=download
Checksums :
MD5: 5e4d969c82426f2a5483dd5d58b573b3
SHA-1: 94dcfc29538984f6ef867191195d6e7fae86b69c
OTA 2: This upgrades the phone from build number A7010a48_S147_160113_ROW to A7010a48_S148_160201_ROW.
URL : http://phonedl.ota.lenovomm.com/dls...OW_TO_A7010a48_S148_160201_ROW_WC2A54CCF5.zip
Mirror : https://userscloud.com/qqsvk3nyv8t4
Thanks to @gursewak.10
OTA 3: This upgrades the phone from build number A7010a48_S148_160201_ROW to A7010a48_S150_160219_ROW.
URL : http://phonedl.ota.lenovomm.com/dls...OW_TO_A7010a48_S150_160219_ROW_WCBBBB28A6.zip
Mirror : https://userscloud.com/mnxxf6s4pmnu
Thanks to @gursewak.10
Installation Instructions :
1. Rename the downloaded zip file to "update.zip" using a file manager and place it in the root directory of the internal storage.
2. Power off your device.
3. Access the recovery by holding down the power key until the device vibrates and then pressing and holding the Volume Down and Volume Up buttons until the recovery screen appears.
4. Tap on "Install upgrade pack".
5. Tap on "Yes" when asked to "Install update.zip from internal or external sdcard".
This will start your installation and takes 10-20 minutes based on the number of apps installed.
Cheers,
abhish3k
Click to expand...
Click to collapse
Hello Abhishek..
Dear i m not able to install Update.zip ..
it says Install Fails..
i have rooted my device with KingRoot & now unroot it..
Please guide..
Well here is the next 33mb update
https://userscloud.com/kdz3habbdrzf
update failed
I am unable to update this time with 33Mb update. It shows update failed. I had not rooted my device or done anything wrong with it. Then why its not getting this update?
abhish3k9 said:
Well, it depends.... Which app is FCing ?
Click to expand...
Click to collapse
Like I mentioned, "Cloud" and "step counter".
Follow this link
glassyrajat said:
Hello Abhishek..
Dear i m not able to install Update.zip ..
it says Install Fails..
i have rooted my device with KingRoot & now unroot it..
Please guide..
Click to expand...
Click to collapse
This guide for Lenovo K3 Note also applies for K4 Note. I hope this helps you out.
Cheers,
abhish3k
When i update 2nd one 40 mb file the error came & file software can not update please help me
douglastabajara said:
Hey, guys, can I install this on the brazilian version? Thanks.
Click to expand...
Click to collapse
Check in settings>>about phone>>device info
If it shows ROW in build. Number i.e. Rest of World then you can install.
I think there are two lenovo k4 software versions only- 1)Chinese 2)ROW -Rest of World
---------- Post added at 10:15 PM ---------- Previous post was at 10:07 PM ----------
Friend if you are not able to install any of the updates here are some. Notes which may help you-
-The file should be renamed to update.zip. -all small letters sometime error comes due to it.
-phone should not be rooted
-unrooting also doesn't work. Rare chance of updating success in this case. Try installing stock rom again.
-try downloading with no pause during download as sometimes a file gets corrupted in zip file causing update failure.
***meanwhile check here for other k4 help
http://forum.xda-developers.com/android/general/lenovo-vibe-k4-note-t3341182
Well friends good news official marshmallow update has started rolling out.
Heres the link
http://phonedl.ota.lenovomm.com/dls...OW_TO_A7010a48_S202_160316_ROW_WCB5490CE7.zip
Mirror https://userscloud.com/c13b2auv6tjw
gursewak.10 said:
Well friends good news official marshmallow update has started rolling out.
Heres the link
Click to expand...
Click to collapse
please share the steps on how to flash the update zip without recovery, I've rooted with kingroot and I've still two OTA's which has to be updated.
Thanks
kiran2508 said:
please share the steps on how to flash the update zip without recovery, I've rooted with kingroot and I've still two OTA's which has to be updated.
Thanks
Click to expand...
Click to collapse
Then you can't
Because for every new update its compulsory that you should already have previous update installed.
You should flash stock rom first via sp flash tool and then install all updates according to serial wise.
Its all about FE-170 CG K012 ( Fonepad 7 2014 )
This thread will be Updated frequently (Update: May 2016)
How to Root:
Lollipop : Link (Skip Modding UI) !
Kitkat : The same as the Lollipop but you don't need to flash the fastboot Just run the Temporary Recovery
How to Upgrade :
From JB to Kitkat :
OTA : (recommended)
1. Get a strong and fast WiFi connection
2.Go to Setting > about > software update
3.Check for updates
Manually >>> (For Experts)
Steps of Update:
1. Check SKU of your device** could be ( WW , CN , TR , TW)
2. Download device software ( V11.2.3.18.2 ) form here ( Its Just a zip File )
3. Only apply to same SKU update, Example: WW->WW, CN->CN, TW->TW , TR -> TR
4. Wrong SKU may cause update failure, please update the same SKU version only.
5. Copy the zip file( you got it from step 2) in SD Card and reboot the Device
6. After a While a Notification pop's out showing an Update detected.
Briefing Here
From Kitkat to Lollipop :
OTA : (recommended)
1. Get a strong and fast WiFi connection
2.Go to Setting > about > software update
3.Check for updates
Manually >>> (For Experts)
Steps of Update:
1. Check SKU of your device** could be ( WW , CN , TR , TW)
2. Download device software (V 12.8.1.38 ) form here ( Its Just a zip File )
3. Only apply to same SKU update, Example: WW->WW, CN->CN, TW->TW , TR -> TR
4. Wrong SKU may cause update failure, please update the same SKU version only.
5. Put the zip file( you got from step 2) in SD Card and reboot the Device
6. After a While a Notification pop's out showing an Update detected.
Briefing Here
How to Downgrade :
From Lollipop to JB :
DO IT AT YOUR OWN RISK ( Proceed with caution and do the same : Risk of losing IMEI )
I'm not responsible for anything goes wrong about your device
***Some Users reported its done successfully but some of them said they have lost their IMEI ***
*Activate Developer mode (Settings-> info-> information about software-> quickly press a finger a few times on the item build number ) (You will see a secret menu to: Settings-> developer mode> USB debugging).
**Enable the installation of unknown origin applications. (Settings-> security-> unknown sources).
1. Check SKU of your device** could be ( WW , CN , TR , TW)
2. Download the firmware of 4.3 (10.32.1.33.1) ( 4.4.2 isn't successful) from this link:
3.You end up with a file called: "UpdateLauncher_K012_XX_10_32_1_33_1.zip".
4. Extract it and you Get "UL-K012-XX-10.32.1.33.1-user.zip" file (or pull it out).
5. Rename the "UL-K012-XX-10.32.1.33.1-user.zip" to "K012_SDUPDATE.zip".
6. Copy the newly renamed file ( "K012_SDUPDATE.zip") on the root of SD card.
7. Turnoff the device
8. Go to droidboot (volume UP and POWER simultaneously).
9. Select "RECOVERY MODE" (moving to it by volume), and press the power button to confirm.
Wait for the installation of the firmware and you will be with 4.3.
Then proceed to the 4.4.2 via OTA MANUALLY .. and remember to turn off automatic downloading of firmware via WIFI .. (Settings-> INFO-> SYSTEM UPDATE -> the three dots in the upper right -> disable "Automatically download using Wi-Fi ")
How to Optimize Lollipop :
A lot of users complain about lollipop bugs
lollipop is bugless for daily usage ( in some rare cases it has bugs)
But how to Reduce lags and optimize the speed and battery life:
1. Root your device !
2. Remove these apps (Use 3C ToolBox) Backup them First
Remove List:
AsusLiveDemoService
AsusLiveDemoUI
stock*Games*
Clean Master
Google+
Drive
Google Search app
Google Music
Google Magazine
Google TV
Hangouts
Google Books
Google NewsStand
2*. Disable(freeze) these apps (Use 3C ToolBox)
Disable List:
WhatsNext
talkback
RemoteLink
PrintSpooler
Omlet
CloudPrint
Maps
3. Install busybox with (Busybox on Rail) Download
4. Install Modded MX Player for FE170 lollipop (Lag less with 1080p even !! HW+ ) remember to check HW+ ON ! (DO NOT UPDATE IT) Download
5. Install X86 Youtube app Download (DO NOT UPDATE IT)
6. Install X86 Facebook app Download (If it doesnt work it shows there is not enough dpi for the app)
7. Install X86 Chrome Download
8. Install X86 Instagram Download
9. Install X86 Google Keyboard Download
10. Install X86 Google Camera (really better Camera! Just compare it with stock) Download
Don't use adblocker for getting download link
Tell me about your problems in lollipop
Don't forget to push Thanks Button
very nice but i wouldn't recommend downgrading using stock recovery. use tethered cwm instead. I have posted a guide on how to downgrade with cwm somewhere
hello i have k012_2 named fonepad 7 - TR SKU (no voice call capabilitiy - just 3g internet)
I know fonepad 7 has generally k012 code.
I tried every thing to change my SKU to WW or CN for making gsm calls but i failed.
Do you have suggestion for enabling call function?
Thank you very much
mca1 said:
hello i have k012_2 named fonepad 7 - TR SKU (no voice call capabilitiy - just 3g internet)
I know fonepad 7 has generally k012 code.
I tried every thing to change my SKU to WW or CN for making gsm calls but i failed.
Do you have suggestion for enabling call function?
Thank you very much
Click to expand...
Click to collapse
This is a hardware limitation and there is not such a solution
Does these Tweaks work for you ?
adblocker said:
This is a hardware limitation and there is not such a solution
Click to expand...
Click to collapse
But in Türkiye, there is a person that can make k012_2 phone call capability. Also he wants 30$ for this work. He doesnt share his secret. I dont want to give 30 box to him.
adblocker said:
Its all about FE-170 CG K012 ( Fonepad 7 2014 )
This thread will be Updated frequently (Update: March 2016)
How to Root:
Lollipop : Link (Skip Modding UI) !
Kitkat : The same as the Lollipop but you don't need to flash the fastboot Just run the Temporary Recovery
How to Upgrade :
From JB to Kitkat :
OTA : (recommended)
1. Get a strong and fast WiFi connection
2.Go to Setting > about > software update
3.Check for updates
Manually >>> (For Experts)
Steps of Update:
1. Check SKU of your device** could be ( WW , CN , TR , TW)
2. Download device software ( V11.2.3.18.2 ) form here ( Its Just a zip File )
3. Only apply to same SKU update, Example: WW->WW, CN->CN, TW->TW , TR -> TR
4. Wrong SKU may cause update failure, please update the same SKU version only.
5. Copy the zip file( you got it from step 2) in SD Card and reboot the Device
6. After a While a Notification pop's out showing an Update detected.
Briefing Here
From Kitkat to Lollipop :
OTA : (recommended)
1. Get a strong and fast WiFi connection
2.Go to Setting > about > software update
3.Check for updates
Manually >>> (For Experts)
Steps of Update:
1. Check SKU of your device** could be ( WW , CN , TR , TW)
2. Download device software (V 12.8.1.38 ) form here ( Its Just a zip File )
3. Only apply to same SKU update, Example: WW->WW, CN->CN, TW->TW , TR -> TR
4. Wrong SKU may cause update failure, please update the same SKU version only.
5. Put the zip file( you got from step 2) in SD Card and reboot the Device
6. After a While a Notification pop's out showing an Update detected.
Briefing Here
How to Downgrade :
From Lollipop to JB :
DO IT AT YOUR OWN RISK ( Proceed with caution and do the same : Risk of losing IMEI )
I'm not responsible for anything goes wrong about your device
***Some Users reported its done successfully but some of them said they have lost their IMEI ***
*Activate Developer mode (Settings-> info-> information about software-> quickly press a finger a few times on the item build number ) (You will see a secret menu to: Settings-> developer mode> USB debugging).
**Enable the installation of unknown origin applications. (Settings-> security-> unknown sources).
1. Check SKU of your device** could be ( WW , CN , TR , TW)
2. Download the firmware of 4.3 (10.32.1.33.1) ( 4.4.2 isn't successful) from this link:
3.You end up with a file called: "UpdateLauncher_K012_XX_10_32_1_33_1.zip".
4. Extract it and you Get "UL-K012-XX-10.32.1.33.1-user.zip" file (or pull it out).
5. Rename the "UL-K012-XX-10.32.1.33.1-user.zip" to "K012_SDUPDATE.zip".
6. Copy the newly renamed file ( "K012_SDUPDATE.zip") on the root of SD card.
7. Turnoff the device
8. Go to droidboot (volume UP and POWER simultaneously).
9. Select "RECOVERY MODE" (moving to it by volume), and press the power button to confirm.
Wait for the installation of the firmware and you will be with 4.3.
Then proceed to the 4.4.2 via OTA MANUALLY .. and remember to turn off automatic downloading of firmware via WIFI .. (Settings-> INFO-> SYSTEM UPDATE -> the three dots in the upper right -> disable "Automatically download using Wi-Fi ")
How to Optimize Lollipop :
A lot of users complain about lollipop bugs
lollipop is bugless for daily usage ( in some rare cases it has bugs)
But how to Reduce lags and optimize the speed and battery life:
1. Root your device !
2. Remove these apps (Use 3C ToolBox) Backup them First
Remove List:
AsusLiveDemoService
AsusLiveDemoUI
stock*Games*
Clean Master
Google+
Drive
Google Search app
Google Music
Google Magazine
Google TV
Hangouts
Google Books
Google NewsStand
2*. Disable(freeze) these apps (Use 3C ToolBox)
Disable List:
WhatsNext
talkback
RemoteLink
PrintSpooler
Omlet
CloudPrint
Maps
3. Install busybox with (Busybox on Rail) Download
4. Install Modded MX Player for FE170 lollipop (Lag less with 1080p even !! HW+ ) remember to check HW+ ON ! (DO NOT UPDATE IT) Download
5. Install X86 Youtube app Download (DO NOT UPDATE IT)
6. Install X86 Facebook app Download
7. Install X86 Chrome Download Remember to Disable WebRTC in chrome://flags
8. Install X86 Instagram Download
9. Install X86 Google Keyboard Download
10. Install X86 Google Camera (really better Camera! Just compare it with stock) Download
Tell me about your problems in lollipop
Don't forget to push Thanks Button
Click to expand...
Click to collapse
Very helpfull post. I was very much helped from your post. i use the items described in "how to optimize LOLLIPOP". For me it was very good someone to let me know wich app to be safely removed and wich can be freezed so the phone can work faster but without problems, so thank you for that list.
Second, 3C Toobox that you suggest is very powerfull as i saw and does alot of thinks others dont.
The App you are suggesting( Google,camera, FB, MX player) i have to report this
YOUTUBE, MX, GOOGLE CAMERA very easy downloaded and istalled and as you say they are very nice too.
Chrome and FB, allthough downloaded, was not able to install. Chrome cause the phone to reboot and nothing was installed. FB run the process succefully no in the end it says' app was not installed"
for Google keybord and Instagram downloading link is not working.
But all the other thing work out and i think my phone is in better contition now. For all your knowledges and efford to share it with us i would like to thenk you very much
logosA said:
Very helpfull post. I was very much helped from your post. i use the items described in "how to optimize LOLLIPOP". For me it was very good someone to let me know wich app to be safely removed and wich can be freezed so the phone can work faster but without problems, so thank you for that list.
Second, 3C Toobox that you suggest is very powerfull as i saw and does alot of thinks others dont.
The App you are suggesting( Google,camera, FB, MX player) i have to report this
YOUTUBE, MX, GOOGLE CAMERA very easy downloaded and istalled and as you say they are very nice too.
Chrome and FB, allthough downloaded, was not able to install. Chrome cause the phone to reboot and nothing was installed. FB run the process succefully no in the end it says' app was not installed"
for Google keybord and Instagram downloading link is not working.
But all the other thing work out and i think my phone is in better contition now. For all your knowledges and efford to share it with us i would like to thenk you very much
Click to expand...
Click to collapse
Apps updated
All the links workin properly !
Don't use Adblocker on these sites
Remove chrome updates and do "clear data " and try links (if it does work remove entire chrome by 3C tool and install new version normally (not recommended !!! you may lose connection checking ability ) )
For FB I think there s no enough DPI but you can try.
For Google keyboard and Instagram try new links
adblocker said:
Apps updated
All the links workin properly !
Don't use Adblocker on these sites
Remove chrome updates and do "clear data " and try links (if it does work remove entire chrome by 3C tool and install new version normally (not recommended !!! you may lose connection checking ability ) )
For FB I think there s no enough DPI but you can try.
For Google keyboard and Instagram try new links
Click to expand...
Click to collapse
You may be right about adblocker, i am always blocking ads and maybe this is the reason for keyboard and istagram not opening link. Any way, thanks again for response
---------- Post added at 08:02 PM ---------- Previous post was at 07:40 PM ----------
adblocker said:
Apps updated
All the links workin properly !
Don't use Adblocker on these sites
Remove chrome updates and do "clear data " and try links (if it does work remove entire chrome by 3C tool and install new version normally (not recommended !!! you may lose connection checking ability ) )
For FB I think there s no enough DPI but you can try.
For Google keyboard and Instagram try new links
Click to expand...
Click to collapse
yes i just check out and all links are working as mention above.
With adblocker disabled, there is no problem in the links. FB is actually DPI problem
Finally it's here! I'm waiting for this for one year. I will give you my feedback in the next week.
logosA said:
You may be right about adblocker, i am always blocking ads and maybe this is the reason for keyboard and istagram not opening link. Any way, thanks again for response
---------- Post added at 08:02 PM ---------- Previous post was at 07:40 PM ----------
yes i just check out and all links are working as mention above.
With adblocker disabled, there is no problem in the links. FB is actually DPI problem
Click to expand...
Click to collapse
Try This version of FB ! It has to work ... Download
adblocker said:
Try This version of FB ! It has to work ... Download
Click to expand...
Click to collapse
downloaded it, installed it, but its not starting. after 3 minutes 'facebook is not responting'. I'll try reseting phone to factory, because i have several other issues and then try again. Any way thanks for your effords.
I' ll report here results
logosA said:
downloaded it, installed it, but its not starting. after 3 minutes 'facebook is not responting'. I'll try reseting phone to factory, because i have several other issues and then try again. Any way thanks for your effords.
I' ll report here results
Click to expand...
Click to collapse
Hey
tell me about bugs that u've discovered
adblocker said:
Hey
tell me about bugs that u've discovered
Click to expand...
Click to collapse
i 've been busy(tax season in my work) so i was not able to respond so far, but i wiil do so in next two days, i promise....
my comments about suggestions you made
As i have posted before, you have done a very good work, collecting all these tips and trick that really make our phone to work more smooth and fast. I followed all your suggestion and these are my observetions.
When i unistalled and freese all the apps and services you are suggesting, I noticed that the tablet is working 15-20% faster than before, so this is the first + for your project!
downloaded and tried to install all that you suggest. All are working very well except:
FB is not installing at all no matter what you do.( uninstall, clear data, reinstall it, etc)
Chrome i was not able to install x86, so i downloaded from Play and install new version. I am not fun of Chrome and for once again a realized how heavy load is this browser, i cant see why people are using it. XDA start page did 3 minutes to load, since Mozilla 10 seconds. Any way this is personal opinion .......
Instagramm cause me black screen on phone in the end of installation. I had to hold down power so the phone closes and restarting it. When came back Instagram is working very well !!!!
So the main problems are FB and Chrome for me.
I am using an APP I found here in XDA that compines FB - messenger -Twitter in on screen without heavy load phone you can give it a try if you want. The name is Slidechat and you can take it from Play for free
[APP][4.0+][v2.0]Slidechat http://forum.xda-developers.com/android/apps-games/app-slidechat-t3382662
I hope i helped someone with these thought of mine.
The big value though are to ADBLOCKER effords who collected and tested all these things for us to find ready.
THANKS MATE @adblocker !!!!
thanks a lot for the guide, I'm trying to follow your instructions to root the device, but in the first step
(fastboot flash fastboot fastboot.img) the only thing I get is a message
<waiting for device>
and nothing happens
when I start the device normally and connect it to PC it is detected fine and nothing is wrong.
any ideas?
neno007 said:
thanks a lot for the guide, I'm trying to follow your instructions to root the device, but in the first step
(fastboot flash fastboot fastboot.img) the only thing I get is a message
<waiting for device>
and nothing happens
when I start the device normally and connect it to PC it is detected fine and nothing is wrong.
any ideas?
Click to expand...
Click to collapse
TRY this method to see if it helps
http://forum.xda-developers.com/showpost.php?p=61452330&postcount=360
After I rooted my device,
my device shutdown, I've tried to flash my phone but it tells me that:
GPT command failed
Then I tried SDK
RECOVERY FAILED
E: mount cache failed
plz help me
logosA said:
TRY this method to see if it helps
http://forum.xda-developers.com/showpost.php?p=61452330&postcount=360
Click to expand...
Click to collapse
Thanx a lot, this worked and I could root the device.
many thanks
Cruise007 said:
my device shutdown, I've tried to flash my phone but it tells me that:
GPT command failed
Then I tried SDK
RECOVERY FAILED
E: mount cache failed
plz help me
Click to expand...
Click to collapse
read this http://forum.gsmhosting.com/vbb/f977/asus-zenfone5-need-fimwere-2017447/
abd this http://forum.xda-developers.com/show...&postcount=360
UPDATE: ATT released the official OTA for 6.01 build G928AUCU2BPE6
Sideload Links
(5.1.1) S2APE3 -> (6.0.1) 2BPE6 Credit to: meek2100
https://xdmd.sl.attcompute.com/agents/48726/1488/SS-G928AUCS2APE3-to-U2BPE6-UP
----------------------------------------
(5.1.1) U2APB2 -> (6.0.1) 2BPE6 Credit to: meek2100
https://xdmd.sl.attcompute.com/agents/48726/1488/SS-G928AUCU2APB2-to-U2BPE6-UP
Has anyone received the OTA version listed on Samsung's support site?
http://www.samsung.com/us/support/answer/ANS00043774/997418903/SM-G928AZKEATT
It says the it is only Android 5.1.1, but the build number is higher than what is available to me. I'm updated to G928AUCU2APB2 and don't have any updates available, but the latest build available according to Samsung ends in "2BPD5"
I'm curious if we can pull that build from ATT's servers using the same method others used to get 6.01 on the S6/S6 Edge.
http://forum.xda-developers.com/att-galaxy-s6-edge/general/to-mm-download-link-t3371830
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
EDIT: Instructions on how to update ATT Samsung S6 Edge+ (G928A) to Android 6.0.1 (Marshmallow)
1. Back up your phone with Smart Switch. When you sideload the update it will wipe your phone.
2. YOU MUST HAVE build G928AUCU2APB2 on your phone. Check Settings > System > About Devices > Baseband version.
3. Download & install 15 second ADB.
http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
4. Download update files from ATT's server.
(5.1.1) U2APB2 -> (6.0.1) 2BPE6 Credit to: meek2100
https://xdmd.sl.attcompute.com/agents/48726/1488/SS-G928AUCU2APB2-to-U2BPE6-UP
5. Rename the downloaded update file to "OTA.zip" and move it to your main PC directory C:\
4. Open "Command Prompt" on your PC
6. Shutdown phone.
7. Restart phone by holding down the POWER, HOME, and UP button at the same time. DONT release until you get an UPDATE LOGO on your phone.
8. Use the volume keys to highlight "Apply update from ADB", then press the power button to select it.
8. In the command prompt window, type adb devices.
9. Type adb sideload C:/ota.zip Change C:/ to match the directory you moved the update file to.
10. Press Enter and it should start transfering & installing the OTA file
11. This process will take 1hr so be patient and let the phone reboot.
12. Once the phone reboot, you will have 6.0.1!!!!!
13. Restore from your Smart Switch back up.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
EDIT: G928A All Update File Links
(5.1.1) S2APE3 -> (6.0.1) 2BPE6 Credit to: meek2100
https://xdmd.sl.attcompute.com/agents/48726/1488/SS-G928AUCS2APE3-to-U2BPE6-UP
----------------------------------------
(5.1.1) U2APB2 -> (6.0.1) 2BPE6 Credit to: meek2100
https://xdmd.sl.attcompute.com/agents/48726/1488/SS-G928AUCU2APB2-to-U2BPE6-UP
----------------------------------------
(5.1.1) U2APB2 -> (6.0.1) 2BPE5 Credit to: meek2100
https://xdmd.sl.attcompute.com/agents/48726/1488/SS-G928AUCU2APB2-to-U2BPE5-UP
----------------------------------------
(5.1.1) U2APB2 -> (6.0.1) 2BPE1 Credit to: meek2100
https://xdmd.sl.attcompute.com/agents/48726/1488/SS-G928AUCU2APB2-to-U2BPE1-UP
----------------------------------------
(5.1.1) U2APB2 -> (6.0.1) U2BPD5 Credit to: GLIMMERMAN76 and bcak610
https://xdmd.sl.attcompute.com/agents/48726/1488/SS-G928AUCU2APB2-to-U2BPD5-UP
----------------------------------------
(5.1.1) 2AOJ1 -> (5.1.1) U2APB2 Credit to: bcak610
https://xdmd.sl.attcompute.com/agents/48726/1488/SS-G928AUCU2AOJ1-to-U2APB2-UP
----------------------------------------
(5.1.1) 2AOJ1 ODIN files for clean flash or restoring to STOCK. Credit to: Yamaha169
https://drive.google.com/file/d/0B1dPgClURCHJTjA3dF82WnNiMzg/view
meek2100 said:
Has anyone received the OTA version listed on Samsung's support site?
http://www.samsung.com/us/support/answer/ANS00043774/997418903/SM-G928AZKEATT
It says the it is only Android 5.1.1, but the build number is higher than what is available to me. I'm updated to G928AUCU2APB2 and don't have any updates available, but the latest build available according to Samsung ends in "2BPD5"
I'm curious if we can pull that build from ATT's servers using the same method others used to get 6.01 on the S6/S6 Edge.
http://forum.xda-developers.com/att-galaxy-s6-edge/general/to-mm-download-link-t3371830
Click to expand...
Click to collapse
Its a typo on samsungs part. SHould be a A like you have.
Umm..... If you click on the "Software version history" on the same page you linked on the samsung page it actually lists the build as Marshmallow.
G928AUCU2BPD5
5/04/2016
Update to Android 6.0.1, Marshmallow
https://xdmd.sl.attcompute.com/agents/48726/1488/SS-G928AUCU2APB2-to-U2BPD5-UP
There is the download link for MM for the 928a
Sweet, Thanks Glimmerman76. I'm going to try loading it now.
GLIMMERMAN76 said:
https://xdmd.sl.attcompute.com/agents/48726/1488/SS-G928AUCU2APB2-to-U2BPD5-UP
There is the download link for MM for the 928a
Click to expand...
Click to collapse
Loaded it on wife's runs fin
Sent from my SAMSUNG-SM-G928A using XDA Free mobile app
AT&T Marshmallow update
I was able to install the AT&T Marshmallow update to my S6 edge plus successfully with no problems. Thank you for the update file.
Mine loaded fine and seems to be running quicker than before. So far it looks like there isn't support for ATT's wifi-calling or advanced messaging.
@GLIMMERMAN76 How did you find the correct (agent/xxxxxx/xxxxxx) information?
anyone please share odin file for pb2?
or PD5, why not. thanks.
Are you loading this with adb sideload or with odin?
---------- Post added at 11:08 AM ---------- Previous post was at 10:45 AM ----------
GLIMMERMAN76 said:
Loaded it on wife's runs fin
Sent from my SAMSUNG-SM-G928A using XDA Free mobile app
Click to expand...
Click to collapse
I'm tying to adb sideload it and will not recognize the file. Any ideas?
The link here is for sideload and pb2 only. I am on og1 so mine doesn't work.
judwheeler said:
Are you loading this with adb sideload or with odin?
---------- Post added at 11:08 AM ---------- Previous post was at 10:45 AM ----------
I'm tying to adb sideload it and will not recognize the file. Any ideas?
Click to expand...
Click to collapse
I used adb sideload and every thing went perfect. In the begining you need to change the file to a zip file for adb sideload to recognize.
meek2100 said:
Mine loaded fine and seems to be running quicker than before. So far it looks like there isn't support for ATT's wifi-calling or advanced messaging.
@GLIMMERMAN76 How did you find the correct (agent/xxxxxx/xxxxxx) information?
Click to expand...
Click to collapse
props goto @bcak610 post 796 in the thread below.
http://forum.xda-developers.com/att...0-att-release-date-prediction-t3321144/page80
judwheeler said:
Are you loading this with adb sideload or with odin?
---------- Post added at 11:08 AM ---------- Previous post was at 10:45 AM ----------
I'm tying to adb sideload it and will not recognize the file. Any ideas?
Click to expand...
Click to collapse
see attached pic
GLIMMERMAN76 said:
see attached pic
Click to expand...
Click to collapse
So is it true that we should compress the file into zip , not just change the extension?
I just changed the file extension to zip with no compression.
LOL. Finally got it to work. My PC had a virus that was blocking it. You don't have to add .zip to the file for it to work
judwheeler said:
Are you loading this with adb sideload or with odin?
---------- Post added at 11:08 AM ---------- Previous post was at 10:45 AM ----------
I'm tying to adb sideload it and will not recognize the file. Any ideas?
Click to expand...
Click to collapse
judwheeler said:
LOL. Finally got it to work. My PC had a virus that was blocking it. You don't have to add .zip to the file for it to work
Click to expand...
Click to collapse
You dont have to but some windows machines cant see it right.
vista1984 said:
The link here is for sideload and pb2 only. I am on og1 so mine doesn't work.
Click to expand...
Click to collapse
where can i get the odin file for pb2 ??
My update went through successfully but I lost all my data and apps. Is this expected?