Hi everyone (and especially adfree that is Wincomm lover!!)
I've seen this topic before but i couln't understand how to work with wincomm
http://forum.xda-developers.com/showthread.php?t=928170
It would be great if someone writes a short help for using wincomm on wave devices
by the way in that topic you were talking about SW.ppt, please give download link
Thanks in advance
Here I have tried to Link all documents...
http://forum.xda-developers.com/showthread.php?t=901416
This should lead to this:
http://www.cpkb.org/wiki/Samsung_GT-S8500_Wave_service_manual
Download please:
All in one package
Samsung GT-S8500 GT-S8500L Wave complete Service Manual (73.30 MB):
Click to expand...
Click to collapse
Best Regards
All I'm getting in wincomm after connecting wave Y is modem query only.
What are the other commands for it ?
Hello.
Code maybe helps:
*#197328640#
Search for entries with WinComm...
I will add Screenshots... later...
Best Regards
Edit 1.
Minimum settings...
USB Debugging...
So you have chance to see sometihnig if App is started...
Or for whole Log of all handest stuff... enable Debug Mode Middle or High:
*#33284*#
Download address：(korean site)I can‘t write outside address sorry please sent me a message get the download link
choose :CM9_0805_lu6200_Yu.zip
please 4wipi
Solve all problems and very smooth.
bug：just little power consumption
can't Receive MMS（please install go messager can slove the problem）
wifi share dont set password if you do that maybe can’t connect.
if you living in south korea use lguplus please set like this：
1.#*#*4636#*#* 2.PHONE Information 3.networks choose “LTE/EDVO/CDMA”
LGUPLUS APN: internet.lguplus.co.kr
sorry my bad english
THANKS The Developer：hi1jason
Korean Galaxy Gio M290K & S Solution for Wifi, SMS, MMS Solved
Assalam -o- Aliekum Xda,
This is my first post here as a tutorial if i am making any mistake please ignore bacause i know this post is very helpful for those who have Korean Galaxy Gio, few days i bought a handset called Galaxy Gio Korean Version M290K & S but the problem was with SMS i was unable to send sms to all of my contacts and was getting error of INVALID Sender however i searched 2 days on google and tried so many Rom from internet but no any rom was working 100% so decided to searched on GOOGLE KOREA and i found a rom Called Queen.GingerbreadRom this is 100% working rom in my own handset u can also use this rom.
How to Install :
Just Flash it with Odin Downloader
if u dont know how to flash Galaxy Gio Fellow this method link below
http://nguyenkieuhung1984.blogspot.com/2012/01/how-to-upgrade-samsung-galaxy-gio-s5660_13.html
Note : THIS ROM IS ONLY FOR KOREAN HANDSET DO NOT TRY THIS ON S5660 INTERNATIONAL VERSION
Korean ROM Download Link :
http://dl.dbank.com/c0rnm5obtp
Install Samsung Kies then restart ur pc then install this rom with this method link below
http://nguyenkieuhung1984.blogspot.com/2012/01/how-to-upgrade-samsung-galaxy-gio-s5660_13.html
Email me if link is not working i will upload it to some other webiste for convinience..
NOTE : BLUETOOT IS NOT WORKING OTHERWISE EVERYTHING IS WORKING AND THIS IS THE BEST ROM FOR KOREAN S5660 SO IF ANY DEVELOPER WANT TO FIX THE BLUETOOT PROBLEM PLZ GO AHEAD AND HELP US.
Thanks & Regards
Farman Ali Channa
[email protected]
Nice
thx dear
samsung galaxy gio m290k
thanks alot dear,,, bt could u plz tell me how to fix the problem of limited sms (80 to 90 bytes) ??????
Thanks for the great post man.. luv ya. works Great
MrMosQuito said:
Korean Galaxy Gio M290K & S Solution for Wifi, Bluetoot, SMS, MMS Solved
Assalam -o- Aliekum Xda,
This is my first post here as a tutorial if i am making any mistake please ignore bacause i know this post is very helpful for those who have Korean Galaxy Gio, few days i bought a handset called Galaxy Gio Korean Version M290K & S but the problem was with SMS i was unable to send sms to all of my contacts and was getting error of INVALID Sender however i searched 2 days on google and tried so many Rom from internet but no any rom was working 100% so decided to searched on GOOGLE KOREA and i found a rom Called Queen.GingerbreadRom this is 100% working rom in my own handset u can also use this rom.
How to Install :
Just Flash it with Odin Downloader
if u dont know how to flash Galaxy Gio Search Xda
Note : THIS ROM IS ONLY FOR KOREAN HANDSET DO NOT TRY THIS ON S5660 INTERNATIONAL VERSION
Download link for this rom is not possible to add here but i can private msg me i will send u the link
[email protected]
OR Just search on google exacly this u will get the link : Quens_M290K_CHS_20120509.rar
Email me if link is not working i will upload it to some other webiste for convinience..
Thanks & Regards
Farman Ali Channa
Click to expand...
Click to collapse
As you said, The Wifi, SMS, MMS are fixed in this rom but when it comes to bluetooth, it's still not working. Yes it's turning on but it can't detect or the other phone can't detect me. What the hell can i do to fix it? wait for another rom to release?
gefmercado said:
As you said, The Wifi, SMS, MMS are fixed in this rom but when it comes to bluetooth, it's still not working. Yes it's turning on but it can't detect or the other phone can't detect me. What the hell can i do to fix it? wait for another rom to release?
Click to expand...
Click to collapse
i am not the developer of this rom and even dont know how to fix the bluetoot issue but i do know that this is the best ROM in market for ur handset i have requested developer in my post to fix this issue.
Thanx for the rom
MrMosQuito said:
i am not the developer of this rom and even dont know how to fix the bluetoot issue but i do know that this is the best ROM in market for ur handset i have requested developer in my post to fix this issue.
Click to expand...
Click to collapse
thnx dr.I also tried to serch a custom rom for korean gio.but nothing found.so thnx lot.i think that bluetooth is not vert essential.
can u tell what are the extra features on this rom?
I have developed a Language and Media Editor for MT6261 and MT6260 based Smartwatches
ProgrammFetaures:
Supporting MT6260 to MT6261A Baseband
Edit Languages
Supporting Crypted Language Packs
Online Translation
Export and Import Dictionary
Create Custom Dictionary
Change Images and Sound Files
Supporting all MIF Versions and Packs
I am searching Beta Testers.
Everybody who is interested please cantact me: [email protected]
Thanks
What Links?
hey, i want to develop complete rom along with some better features let me know if your enviroment works well.
SmartChinaRes
Hi,
Yes my solution is working well. What do you want to change in Firmware.
Send me your Firmware or Link to Download
Thanks
OXA
can i test it ?
---------- Post added at 10:28 PM ---------- Previous post was at 10:27 PM ----------
oxatools said:
I have developed a Language and Media Editor for MT6261 and MT6260 based Smartwatches
ProgrammFetaures:
Supporting MT6260 to MT6261A Baseband
Edit Languages
Supporting Crypted Language Packs
Online Translation
Export and Import Dictionary
Create Custom Dictionary
Change Images and Sound Files
Supporting all MIF Versions and Packs
I am searching Beta Testers.
Everybody who is interested please cantact me: [email protected]
Thanks
Click to expand...
Click to collapse
can i test it ?
me lo mandi che ko testo
mhd 12 said:
can i test it ?
---------- Post added at 10:28 PM ---------- Previous post was at 10:27 PM ----------
can i test it ?
Click to expand...
Click to collapse
me lo mandi che ko testo
Can you give it for free
can i get download of this software for free
i wont distribute it
This is truly awesome!
Is the knowledge you earned available somewhere or just in your code? I'm excited with RE-ing MTK incl. 2502 though didn't do much myself.
Excellent! I've got Xiaomi Mi Bunny Watch Q - and struggling with it's firmware - already managed to edit MCC/MNC and activate it outside mainland China with ANY cellular operator (with 2G support)
But still have some problems - biggest is Chinese time on watch screen. Less important are Chinese voice prompts ("calling to grandmother" / "father is calling to you" / "successful internet connection")
My fullflash is attachment! If you can - please share your tool with me - would like to sniff through my firmware and try to modify it
Thank you!
FlamingPumpkin said:
Excellent! I've got Xiaomi Mi Bunny Watch Q - and struggling with it's firmware - already managed to edit MCC/MNC and activate it outside mainland China with ANY cellular operator (with 2G support)
But still have some problems - biggest is Chinese time on watch screen. Less important are Chinese voice prompts ("calling to grandmother" / "father is calling to you" / "successful internet connection")
My fullflash is attachment! If you can - please share your tool with me - would like to sniff through my firmware and try to modify it
Thank you!
Click to expand...
Click to collapse
mt6261_apn list editing
FlamingPumpkin said:
Excellent! I've got Xiaomi Mi Bunny Watch Q - and struggling with it's firmware - already managed to edit MCC/MNC and activate it outside mainland China with ANY cellular operator (with 2G support)
But still have some problems - biggest is Chinese time on watch screen. Less important are Chinese voice prompts ("calling to grandmother" / "father is calling to you" / "successful internet connection")
My fullflash is attachment! If you can - please share your tool with me - would like to sniff through my firmware and try to modify it
Thank you!
Click to expand...
Click to collapse
the time or and time_zone in watch is set in mvram_ef_chache_byte_lid
Hi i can be a beta tester of your program
My profile 4pda: http://4pda.ru/forum/index.php?showuser=2249797
No_Russian_Translate.zip - HONGYU60M_BT_11B_PCB01_GSM_MT6260_S00.MX6-60D-3029TN-YDT-DC0821-ZH-V06_637-20180728
With_Russian_Translate.zip - HONGYU60M_BT_11B_PCB01_GSM_MT6260_S00.MX7-COB-DZ09-9307BOE-QCY-DC0821-HYBR-V01_537-20180926
View attachment No_Russian_Translate.zip
View attachment With_Russian_Translate.zip
Hello,
This is a good news you implement this tool.:good:
Could I try it to do some changes on my smartwatch?
Could you send me it in MP?
Thanks a lot,
Helium45b
I hope OP is still reading this thread. In any case I will tag oxatools. I found out my DZ09 watch is SPD. I see mocor and spd6531 to be exact. How? when I plug it in turned on, there is a third option - pc connecting. The other 2 options were udisk and charging. When I click pc connecting there was a pop up that said it needs to install serial scsi drivers. And then finally I see ports in device manager. they are
SPRD SMCC AT interface1 com4
SPRD SMCC AT interface2 com7
SPRD DIAG com3
I have been using the flash tool for this smartwatch but nothing is happening. Can you tell me how to use your tool for this watch? I would like to see if it has wifi or gps and also add video capability and voice commands. Yeah sure. But you never know your tool might do all those in this $10 watch. LOL.
This is the third thread I posted this on. All I need is guidance what is the proper tool to use for this SPRD watch?
This is what I see on *#3646633#
software platform version - mocor_12c
HW version - sc6531_bar
chip type - sc6531
actually there is a lot of list option on this code. I see
IQ mode
Para set
App set
Like over 10 option list and when you click those options theres a lot of sub menus too.
asianbyuti said:
I hope OP is still reading this thread. In any case I will tag oxatools. I found out my DZ09 watch is SPD. I see mocor and spd6531 to be exact. How? when I plug it in turned on, there is a third option - pc connecting. The other 2 options were udisk and charging. When I click pc connecting there was a pop up that said it needs to install serial scsi drivers. And then finally I see ports in device manager. they are
SPRD SMCC AT interface1 com4
SPRD SMCC AT interface2 com7
SPRD DIAG com3
I have been using the flash tool for this smartwatch but nothing is happening. Can you tell me how to use your tool for this watch? I would like to see if it has wifi or gps and also add video capability and voice commands. Yeah sure. But you never know your tool might do all those in this $10 watch. LOL.
This is the third thread I posted this on. All I need is guidance what is the proper tool to use for this SPRD watch?
Click to expand...
Click to collapse
Hi,
Sorry my tool is only working with Mediatek MT6260 and MT6261 Chips not with Spreadtrum
Did you try with this flashtool versions?
https://spdflashtool.com/
OXA
oxatools said:
Hi,
Sorry my tool is only working with Mediatek MT6260 and MT6261 Chips not with Spreadtrum
Did you try with this flashtool versions?
https://spdflashtool.com/
OXA
Click to expand...
Click to collapse
Oh thanks. Ok I will look into it.
Testing
Hello! How can I participate in testing your program? I would like to fix in my device the translation of some items, creating inconvenience in the work. None of the tools found on the network work with my phone's firmware files correctly. Perhaps the program developed by You will appear in paid access?
https //yadi.sk/d/3gFYGtEXKMnFbQ
noformatc said:
Hello! How can I participate in testing your program? I would like to fix in my device the translation of some items, creating inconvenience in the work. None of the tools found on the network work with my phone's firmware files correctly. Perhaps the program developed by You will appear in paid access?
https //yadi.sk/d/3gFYGtEXKMnFbQ
Click to expand...
Click to collapse
Hi,
My Program is not for selling sorry. To much work inside.
Here comes the Resources of your firmware
Download-Link
https://we.tl/t-AHRETIoTuS
if you want to change any of them please tell me
For better working with firmware can you send me a fullflash backup
Thanks
OXA
if you want to change any of them please tell me
For better working with firmware can you send me a fullflash backup
Thanks
OXA[/QUOTE]
Hello! Thank you for responding. I replaced the main menu icons in "resources", I will be grateful if you embed them in the firmware. But it would be more interesting and useful to change the translation of some menu items, because the translated names simply do not fit on the screen and it is not clear what you do when you click. Is it possible to carry out such a thing?
https //yadi.sk/d/o_nuCxWdM0zbwg
Hi,
I'm interested in adding Hebrew fonts to Q50 (G36S) watch so that it can display messages I send in Hebrew.
Is it possible?
Normally whatsapp is working fine - after my reset whatsapp is asking send to whom - I will say the name - the name will be understood and repeated but than "to whom"
When I`m saying call Peter the name wil be recognized and executed ...
Any idea what I can do ?
THANKS !!!
Same here.... frustrating