I love my Note 4 so much that I tried for about 2 weeks to fix it's constant rebooting issue. Went to ATT & Samsung repair center and they couldn't get it to flash. However, it stills turns on, I just generally need to pull the battery for a few minutes to get it to boot.
With that said, I'm not incredibly knowledgeable in this area. I've downloaded ODIN and found lots of resources for the exact steps to follow, however, I'm not sure where I can locate a version of 5.1.1 for ATT. To me, this seems like my only fix for my phone. I've tried clearing cache and factory resets etc. My phone is unlocked. Am I missing anything that you can think of? Can someone link me to a reputable source for the appropriate files?
You seriously cannot imagine how happy I'd be if I can get this thing working again. Thank you!
PS, if you think there is a more stable version than 5.1.1, I'm open to that too.
Bump. Any help is greatly appreciated. Thanks!
Google is your friend...
http://rapidgator.net/file/2ab3e0dc...om/att-galaxy-note-4-sm-n910a-stock-firmware/
Punker1234 said:
I love my Note 4 so much that I tried for about 2 weeks to fix it's constant rebooting issue. Went to ATT & Samsung repair center and they couldn't get it to flash. However, it stills turns on, I just generally need to pull the battery for a few minutes to get it to boot.
With that said, I'm not incredibly knowledgeable in this area. I've downloaded ODIN and found lots of resources for the exact steps to follow, however, I'm not sure where I can locate a version of 5.1.1 for ATT. To me, this seems like my only fix for my phone. I've tried clearing cache and factory resets etc. My phone is unlocked. Am I missing anything that you can think of? Can someone link me to a reputable source for the appropriate files?
You seriously cannot imagine how happy I'd be if I can get this thing working again. Thank you!
PS, if you think there is a more stable version than 5.1.1, I'm open to that too.
Click to expand...
Click to collapse
What is your Baseband? Maybe you can't go back.
Heya guys.
Thank you for the link! I seriously googled and browsed forums for days looking for it. I even went to the Android website with a slew of different version but they did not have the ATT versions. Anyway, I'm going to give this a go but still pretty green to it. I was going to follow the instructions from this post - should work right? https://forum.xda-developers.com/note-4-att/general/expert-phone-trashed-t3573110
And Norbarb, I have no idea what my Baseband version is. I did a quick google to see if I can locate it somewhere but couldn't figure it out. How can I check?
I do appreciate your help.
Punker1234 said:
Heya guys.
Thank you for the link! I seriously googled and browsed forums for days looking for it. I even went to the Android website with a slew of different version but they did not have the ATT versions. Anyway, I'm going to give this a go but still pretty green to it. I was going to follow the instructions from this post - should work right? https://forum.xda-developers.com/note-4-att/general/expert-phone-trashed-t3573110
And Norbarb, I have no idea what my Baseband version is. I did a quick google to see if I can locate it somewhere but couldn't figure it out. How can I check?
I do appreciate your help.
Click to expand...
Click to collapse
Can you reboot to recovery?? There's some info there regarding your current setup
Ironically, now I can't even get the phone to turn on. I bought a battery charger for the Note battery to see if that is the issue. I can't get the battery to charge even when it's plugged in. That arrives Monday so I'll update shortly.
Quick update:
Baseband is N910AUCS2EPK3. I'm not sure if that means I can or can't roll back to Lollipop.
Popped in the charged battery from my new charger and it came right on. Had it on for a little bit just messing around with things. After rebooting it myself a few times, it now is reverting back to it not even turning on, even with a charged battery. I pull the battery 10-20 times, hold the power button without the battery to clearly out any remaining electricity and still no go. I have 2 batteries and neither work. So I'm going to let it sit and if I can get it to come on, install Wake Lock.
Does anyone know if I can revert back to 5.1? I'm not sure how my Baseband effects that. Thank you for all of your help! If I can't get this, I think I may go back to my S3 vs a Pixel.
Punker1234 said:
Quick update:
Baseband is N910AUCS2EPK3. I'm not sure if that means I can or can't roll back to Lollipop.
Click to expand...
Click to collapse
If you have this, you can easily go to Odin and flash 5.1.1. I don't have the link to the LP Odin files, but heres the Odin link for the MM files in OP:
ODIN FILES to get back to EPH5 and latest ODIN
ODIN
Marshmallow full odin file thanks to @mmaku
EPH5 ODIN FILE
https://forum.xda-developers.com/no...hmellow-att-server-link-installation-t3407308
Make sure you can be able to stay in Bootloader for a while before you attempt this, because if your phone dies before the Odin flash completes, you probably likely just created a brick.
Here's my How-To in that same thread. I've also used the newest Odin available with same good results.
https://forum.xda-developers.com/showpost.php?p=68620446&postcount=1180
In fact, I'm about to reflash back to 5.1.1 again from latest updates. MM is pissing me off on that battery issue again. I just wish I can keep it there and keep ATT from pushing OTA without me agreeing to it.
ljjehl said:
If you have this, you can easily go to Odin and flash 5.1.1. I don't have the link to the LP Odin files, but heres the Odin link for the MM files in OP:
ODIN FILES to get back to EPH5 and latest ODIN
ODIN
Marshmallow full odin file thanks to @mmaku
EPH5 ODIN FILE
https://forum.xda-developers.com/no...hmellow-att-server-link-installation-t3407308
Make sure you can be able to stay in Bootloader for a while before you attempt this, because if your phone dies before the Odin flash completes, you probably likely just created a brick.
Here's my How-To in that same thread. I've also used the newest Odin available with same good results.
https://forum.xda-developers.com/showpost.php?p=68620446&postcount=1180
In fact, I'm about to reflash back to 5.1.1 again from latest updates. MM is pissing me off on that battery issue again. I just wish I can keep it there and keep ATT from pushing OTA without me agreeing to it.
Click to expand...
Click to collapse
Holy crap, awesome man. Thank you. At this point, I can't even get the phone to turn on with 2 different batteries. Tried holding the power button down for awhile and letting it sit for hours and still nothing. Not sure what the deal is with this thing. I'll keep attempting.
Punker1234 said:
Holy crap, awesome man. Thank you. At this point, I can't even get the phone to turn on with 2 different batteries. Tried holding the power button down for awhile and letting it sit for hours and still nothing. Not sure what the deal is with this thing. I'll keep attempting.
Click to expand...
Click to collapse
Try holding power button, home button and volume up all at the same time while its powered off. If you can get to Recovery screen here, then you just may be getting somewhere. I would then wipe data/factory reset, then reboot again. If this doesn't work, you can then try holding power botton, home button and Volume down at the same time. This gets you in bootloader mode. Once you get there, only way out at this point is pulling battery (to start over) or get started on Odin flashing.
At least I have kept OTA from working, with this debloater from this link: https://forum.xda-developers.com/android/software/debloater-remove-carrier-bloat-t2998294
ljjehl said:
Try holding power button, home button and volume up all at the same time while its powered off. If you can get to Recovery screen here, then you just may be getting somewhere. I would then wipe data/factory reset, then reboot again. If this doesn't work, you can then try holding power botton, home button and Volume down at the same time. This gets you in bootloader mode. Once you get there, only way out at this point is pulling battery (to start over) or get started on Odin flashing.
At least I have kept OTA from working, with this debloater from this link: https://forum.xda-developers.com/android/software/debloater-remove-carrier-bloat-t2998294
Click to expand...
Click to collapse
Thanks. Yea i can't get into recovery or the download mode. I bought a battery charger just thinking my phone wasn't charging them. The first time it started up perfect. Now I can't get it to come up at all. As mentioned, I'll keep trying. Wondering if something else has gone wrong, or if it's software related still.
ljjehl said:
If you have this, you can easily go to Odin and flash 5.1.1. I don't have the link to the LP Odin files, but heres the Odin link for the MM files in OP:
ODIN FILES to get back to EPH5 and latest ODIN
ODIN
Marshmallow full odin file thanks to @mmaku
EPH5 ODIN FILE
https://forum.xda-developers.com/no...hmellow-att-server-link-installation-t3407308
Make sure you can be able to stay in Bootloader for a while before you attempt this, because if your phone dies before the Odin flash completes, you probably likely just created a brick.
Here's my How-To in that same thread. I've also used the newest Odin available with same good results.
https://forum.xda-developers.com/showpost.php?p=68620446&postcount=1180
In fact, I'm about to reflash back to 5.1.1 again from latest updates. MM is pissing me off on that battery issue again. I just wish I can keep it there and keep ATT from pushing OTA without me agreeing to it.
Click to expand...
Click to collapse
Got the phone to turn back on. Quick question. In your post, you mention 4 ODIN files. I only have an MD5 file and a PT file. Is there something I'm missing? I downloaded the stock rom from the top of my post. Thank you!
Punker1234 said:
Got the phone to turn back on. Quick question. In your post, you mention 4 ODIN files. I only have an MD5 file and a PT file. Is there something I'm missing? I downloaded the stock rom from the top of my post. Thank you!
Click to expand...
Click to collapse
Marshmallow full odin file thanks to @mmaku
EPH5 ODIN FILE
There should be a zip in here that you have to extract four files to a folder. You will use the Odin exe program to look for those files. Just follow my howto notes I wrote in the link I posted. This is to the Marshmallow stuff. Forget the MD5 and pit file unless you know what you are doing. Since I don't know where that came from, I won't even suggest those 2.
ljjehl said:
Marshmallow full odin file thanks to @mmaku
EPH5 ODIN FILE
There should be a zip in here that you have to extract four files to a folder. You will use the Odin exe program to look for those files. Just follow my howto notes I wrote in the link I posted. This is to the Marshmallow stuff. Forget the MD5 and pit file unless you know what you are doing. Since I don't know where that came from, I won't even suggest those 2.
Click to expand...
Click to collapse
Ironically I'm looking to get rid of Marshmallow because I think 6.0.1 screwed up my phone. It was working great prior to that. So the LP files I have are the MD5 and pit, supplied in the 3rd post. Is there somewhere I should look for LP files? And to be clear, are there "regular" rom files for general use, and then ODIN specific files? ie, you could have a "regular" 5.1.1 file, and then ODIN specific 5.1.1?
Punker1234 said:
Ironically I'm looking to get rid of Marshmallow because I think 6.0.1 screwed up my phone. It was working great prior to that. So the LP files I have are the MD5 and pit, supplied in the 3rd post. Is there somewhere I should look for LP files? And to be clear, are there "regular" rom files for general use, and then ODIN specific files? ie, you could have a "regular" 5.1.1 file, and then ODIN specific 5.1.1?
Click to expand...
Click to collapse
Well, I have the 5.1.1 Odin files also, but will have to zip it and upload, unless someone else has a link faster
ljjehl said:
Well, I have the 5.1.1 Odin files also, but will have to zip it and upload, unless someone else has a link faster
Click to expand...
Click to collapse
Is there a way to use the files that I have? Not using ODIN? Or is that not recommended?
Punker1234 said:
Is there a way to use the files that I have? Not using ODIN? Or is that not recommended?
Click to expand...
Click to collapse
With the mess you have, I would think you want to Odin flash a whole new setup. You don't know what's wrong and a partition could be corrupted. If it's hardware, nothing you really could do about it anyways
ljjehl said:
With the mess you have, I would think you want to Odin flash a whole new setup. You don't know what's wrong and a partition could be corrupted. If it's hardware, nothing you really could do about it anyways
Click to expand...
Click to collapse
Got it. I looked around and cannot find the files for ATT. I see them for others I think, but ATT is a ghost. Would you mind uploading if you can? If not I understand. I appreciate all of your help! Crossing my fingers that my Note 4 is still alive and well.
Related
I present the latest stock ODIN firmware directly from Samsung. The current latest is G925TUVU1AOCG. These are for the T-Mobile Galaxy s6 Edge (SM-G925T) ONLY! DO NOT flash this on any other device.
Instructions:
1.) Make sure you have ODIN 3.10 setup (there are many tutorials on xda and youtube for this).
2.) Download the latest firmware zip from below.
3.) Extract the tar.md5 file from the zip.
4.) Add the tar.md5 file to the AP section of ODIN.
5.) Under Options make sure to ONLY select "Auto Reboot" and "F. Reset Time". DO NOT select repartition (or really anything else)!!!
6.) Click start and let it flash.
(Again there are plenty of tutorials on how to use ODIN)
This won't wipe your data (probably). (It didn't during my test but always make backups just in case.)
Downloads:
G925TUVU1AOCG SHA256 (of zip): 70146cbcf5fe157ca1691085db15e8ffaa7cbdeaa16a6043567a1c5796a6cb93
Flashing anything is dangerous and I am not responsible for anything you do to any of your devices!
jamcar said:
I present the latest stock ODIN firmware directly from Samsung. The current latest is G925TUVU1AOCG. These are for the T-Mobile Galaxy s6 Edge (SM-G925T) ONLY! DO NOT flash this on any other device.
Instructions:
1.) Make sure you have ODIN 3.10 setup (there are many tutorials on xda and youtube for this).
2.) Download the latest firmware zip from below.
3.) Extract the tar.md5 file from the zip.
4.) Add the tar.md5 file to the AP section of ODIN.
5.) Under Options make sure to ONLY select "Auto Reboot" and "F. Reset Time". DO NOT select repartition (or really anything else)!!!
6.) Click start and let it flash.
(Again there are plenty of tutorials on how to use ODIN)
This won't wipe your data (probably). (It didn't during my test but always make backups just in case.)
Downloads:
G925TUVU1AOCG SHA256 (of zip): 70146cbcf5fe157ca1691085db15e8ffaa7cbdeaa16a6043567a1c5796a6cb93
Flashing anything is dangerous and I am not responsible for anything you do to any of your devices!
Click to expand...
Click to collapse
Thanks been looking for this
Ahahahahahahaha! I believe roms can be crafted!
jamcar said:
I present the latest stock ODIN firmware directly from Samsung. The current latest is G925TUVU1AOCG. These are for the T-Mobile Galaxy s6 Edge (SM-G925T) ONLY! DO NOT flash this on any other device.
Instructions:
1.) Make sure you have ODIN 3.10 setup (there are many tutorials on xda and youtube for this).
2.) Download the latest firmware zip from below.
3.) Extract the tar.md5 file from the zip.
4.) Add the tar.md5 file to the AP section of ODIN.
5.) Under Options make sure to ONLY select "Auto Reboot" and "F. Reset Time". DO NOT select repartition (or really anything else)!!!
6.) Click start and let it flash.
(Again there are plenty of tutorials on how to use ODIN)
This won't wipe your data (probably). (It didn't during my test but always make backups just in case.)
Downloads:
G925TUVU1AOCG SHA256 (of zip): 70146cbcf5fe157ca1691085db15e8ffaa7cbdeaa16a6043567a1c5796a6cb93
Flashing anything is dangerous and I am not responsible for anything you do to any of your devices!
Click to expand...
Click to collapse
Appreciate the first downloadable tar. Maybe a better place would be in the Android Development section. Just a thought. (Or original android development. ) Not sure which would be more appropriate but I'm sure a lot more users would see this. Just my 2c. Thanks for the post.
Docmjldds said:
Appreciate the first downloadable tar. Maybe a better place would be in the Android Development section. Just a thought. (Or original android development. ) Not sure which would be more appropriate but I'm sure a lot more users would see this. Just my 2c. Thanks for the post.
Click to expand...
Click to collapse
Unmodified stock ROMs do not belong in the android development section so general seemed like the better choice. Any mod, please correct me and move this thread if I am wrong.
Always seem to remember them being in general or Q and A.
Word
THANK YOU for upload to MEGA. I'm getting really sick of the rapidgator spam.
Just when I think I'm getting well versed in rooting, etc. I ask a question like this:
What is the reason to install the stock firmware? I'm rooted with stock recovery flashed.
Thanks!
ShermCraig said:
Just when I think I'm getting well versed in rooting, etc. I ask a question like this:
What is the reason to install the stock firmware? I'm rooted with stock recovery flashed.
Thanks!
Click to expand...
Click to collapse
Lets says the rooting process borked your phone (or maybe you installed some experimental ROM/kernel, etc.). You can still get into download mode but can't get anything else to work right. Flash back to stock and start again.
See how it's useful?
Yep that helps! So, aside from that, if I am up and running - albeit very slowly and with significant battery drain - is there any reason for me to flash this firmware?
jamcar said:
Lets says the rooting process borked your phone (or maybe you installed some experimental ROM/kernel, etc.). You can still get into download mode but can't get anything else to work right. Flash back to stock and start again.
See how it's useful?
Click to expand...
Click to collapse
ShermCraig said:
Yep that helps! So, aside from that, if I am up and running - albeit very slowly and with significant battery drain - is there any reason for me to flash this firmware?
Click to expand...
Click to collapse
Those TWO reasons are exactly why you should try this. MANY, including myself have had the battery drain, lag, and overheating Cured by flashing the stock ROM Firmware.
SuperSport said:
Those TWO reasons are exactly why you should try this. MANY, including myself have had the battery drain, lag, and overheating cured by flashing the stock ROM.
Click to expand...
Click to collapse
@SuperSport - you said you flashed the stock ROM - @jamcar is talking about flashing the firmware. Two completely different things. Can someone clarify? FWIW, I did flash the stock ROM a few days ago, but after reinstalling everything, I'm back to being laggy and battery drain.
Thanks all!!
ShermCraig said:
@SuperSport - you said you flashed the stock ROM - @jamcar is talking about flashing the firmware. Two completely different things. Can someone clarify? FWIW, I did flash the stock ROM a few days ago, but after reinstalling everything, I'm back to being laggy and battery drain.
Thanks all!!
Click to expand...
Click to collapse
Yes, I said that wrong. I meant Firmware. There are many reports that the issues go away after flashing the Stock Firmware back on. I was using Smart Switch to do it, but Odin is a great alternative if Smart Switch does not work for you. I'm not sure why your issues returned, maybe the Root is bringing it back, or maybe an incompatible app. I've found a few apps that Force Close on me that never used to on my Galaxy S4 (ie: 'dji-vision' app for the Phantom Drone), so it is possible other apps are drawing too much power, etc...
Okay, that makes sense. I have been having Amazon FC's since rooting. Frustrating but not as bad as it was at its worst. Using Clean Master for the lag issues and Greenify for the battery. Not sure if they counter each other though. Anyway, I will try flashing the Firmware and report back. Thank you again for clarifying.
SuperSport said:
Yes, I said that wrong. I meant Firmware. There are many reports that the issues go away after flashing the Stock Firmware back on. I was using Smart Switch to do it, but Odin is a great alternative if Smart Switch does not work for you. I'm not sure why your issues returned, maybe the Root is bringing it back, or maybe an incompatible app. I've found a few apps that Force Close on me that never used to on my Galaxy S4 (ie: 'dji-vision' app for the Phantom Drone), so it is possible other apps are drawing too much power, etc...
Click to expand...
Click to collapse
SuperSport said:
Yes, I said that wrong. I meant Firmware. There are many reports that the issues go away after flashing the Stock Firmware back on. I was using Smart Switch to do it, but Odin is a great alternative if Smart Switch does not work for you. I'm not sure why your issues returned, maybe the Root is bringing it back, or maybe an incompatible app. I've found a few apps that Force Close on me that never used to on my Galaxy S4 (ie: 'dji-vision' app for the Phantom Drone), so it is possible other apps are drawing too much power, etc...
Click to expand...
Click to collapse
@SuperSport correct me if I'm wrong but aren't there two reasons for @ShermCraig issues? First would be the outdated build and second would be the recovery deep sleep issue if they're rooted.
jamcar said:
@SuperSport correct me if I'm wrong but aren't there two reasons for @ShermCraig issues? First would be the outdated build and second would be the recovery deep sleep issue if they're rooted.
Click to expand...
Click to collapse
Yes, and Yes. But I have heard some report that they Rooted after flashing the Firmware that has the OCG update included and they did not have the deep sleep issue anymore. Although, I believe they replaced the recovery with the original again. I myself have not rooted, so I'm not speaking from experience, just what I've been reading.
SuperSport said:
Yes, and Yes. But I have heard some report that they Rooted after flashing the Firmware that has the OCG update included and they did not have the deep sleep issue anymore. Although, I believe they replaced the recovery with the original again. I myself have not rooted, so I'm not speaking from experience, just what I've been reading.
Click to expand...
Click to collapse
So, I cannot access Mega from my office - can anyone possibly put it in either dropbox or drive? DISREGARD - I am getting it by tethering off of my shiny S6 Edge!
ShermCraig said:
So, I cannot access Mega from my office - can anyone possibly put it in either dropbox or drive? DISREGARD - I am getting it by tethering off of my shiny S6 Edge!
Click to expand...
Click to collapse
I've now rooted, and flashed the Stock Recovery back to my phone. Deep Sleep is working fine. I'll monitor it over the next few days to see what the battery life is like.
Here is the Stock Recovery for T-Mobile Edge SM-G925T.
https://drive.google.com/file/d/0B3nX3DCjdq6MWS00NHFqRVhOVlk/view?usp=sharing
jamcar said:
Lets says the rooting process borked your phone (or maybe you installed some experimental ROM/kernel, etc.). You can still get into download mode but can't get anything else to work right. Flash back to stock and start again.
See how it's useful?
Click to expand...
Click to collapse
This is exactly the the situation that I am in. I am glad OP posted the stock firmware.
Does anybody know why my phone gets stuck in a boot loop when I try to root. I used the S6 version as was suggested in the root tutorial, everything goes smoothly but then it just bootloops.
Where are the roms at guys I'm trying to build one as soon as I finish fixing my pc
I attempted to root my phone using the Chainfire Auto-root method today and somehow managed to use the 925p edge MD5 file instead of 920p. This caused a few issues, the X-axis was inverted, no service, and a continual automatic reboot after about 30-60 seconds of the phone being on. In an attempt to fix it, I have tried a few things. in many combinations. I have reflashed the stock tar file, cleared cache, factory reset, and flashed the PIT file found in post 12 of this thread http://forum.xda-developers.com/sprint-galaxy-s6/help/operating-smg920p-t3263325/page3. Unfortunately all attempts have been for fruitless. Obviously the first issue to be tackled is the constant rebooting. Any help would be appreciated.
Maybe flashing unikernel will help, it can be found here: https://www.androidfilehost.com/?fid=24269982087012055
Just flash it in Odin, if that does not work you may want to try bringing it to where you bought it for warranty.
No luck, unfortunately.
offthatwall said:
No luck, unfortunately.
Click to expand...
Click to collapse
Idk, @koop1955 any suggestions?
1619415 said:
Idk, @koop1955 any suggestions?
Click to expand...
Click to collapse
Posted this in the other thread: http://forum.xda-developers.com/showpost.php?p=64735692&postcount=19
That is all that I have for you.
offthatwall said:
I attempted to root my phone using the Chainfire Auto-root method today and somehow managed to use the 925p edge MD5 file instead of 920p. This caused a few issues, the X-axis was inverted, no service, and a continual automatic reboot after about 30-60 seconds of the phone being on. In an attempt to fix it, I have tried a few things. in many combinations. I have reflashed the stock tar file, cleared cache, factory reset, and flashed the PIT file found in post 12 of this thread http://forum.xda-developers.com/sprint-galaxy-s6/help/operating-smg920p-t3263325/page3. Unfortunately all attempts have been for fruitless. Obviously the first issue to be tackled is the constant rebooting. Any help would be appreciated.
Click to expand...
Click to collapse
Koop's stock firmware didn't fix mine for some reason either...heres the stock version that fixed mine
mediafire.com/download/c55xaeb7geq0i2d/G920PVPU3BOJ7_G920PSPT3BOJ7_SPR.zip
Hope it helps!
x1xmadex1x said:
Koop's stock firmware didn't fix mine for some reason either...heres the stock version that fixed mine
mediafire.com/download/c55xaeb7geq0i2d/G920PVPU3BOJ7_G920PSPT3BOJ7_SPR.zip
Hope it helps!
Click to expand...
Click to collapse
The firmware posted above is OJ7, which seems to be an earlier version than the OL1 firmware. I have no idea why OJ7 would work for you when OL1 wouldn't. (Unless you got a bad download of OL1, which is why I recommend checking MD5.)
If you are still on OJ7, can you try system update and see if that takes you to OL1?
koop1955 said:
The firmware posted above is OJ7, which seems to be an earlier version than the OL1 firmware. I have no idea why OJ7 would work for you when OL1 wouldn't. (Unless you got a bad download of OL1, which is why I recommend checking MD5.)
If you are still on OJ7, can you try system update and see if that takes you to OL1?
Click to expand...
Click to collapse
I have already re-rooted my device and installed twrp...it wont let me install a system update due to custom and not official...Also I downloaded the OL1 three occasions..and MD5 passed
x1xmadex1x said:
I have already re-rooted my device and installed twrp...it wont let me install a system update due to custom and not official...Also I downloaded the OL1 three occasions..and MD5 passed[/Q
Im have the constant reboot now. Im gonna try another pb6 6.0.1 tar file only one ive tried was the sprint worker one said revo in in it. That didnt not fix my constant rebooting issue. So far any rom even after odin stock still rebooting every 2 minutes.
Click to expand...
Click to collapse
will get that logcat
Saafir said:
Note the time and grab a logcat.
Ok i left the phone at home but i did look at the log cat about the first ten lines all had emmc in them im not quite sure. Well I cant read it lol. when i get home il flash twrp and restore a back up let reboot a few times get a log cat and post it will twrps log cat work? If im lucky i might get a app installed to do it. I no longer got adb and fastboot on my computer but will download if needed.
im waiting for a replacement to get to the sprint store. i flashed stock and took it in rebooting sprint guy tried factory resetting it and clearing cache which got it stuck in the pre load starting or optimizing apps before itd finish it it would reboot and if i kept going id beable get to start up settings thats it. now i can flash twrp still it does restores my back ups and after that itl boot the system i can uninstall or install something or what not maybe 1 min after im able to get into it it reboot. only wifi connects though.
Again i had about all roms we got on sprint forum on that phone worked awesome loved it til the time i restored the efs on 6.0.1 with a twrp thats a unofficial build modded to work on 920p.
Click to expand...
Click to collapse
Sounds good thanks man.
Seems as maybe a somewhat common issue unfortunately thats happening for s6 as well as sprint note 5 as there are a few threads regarding the same issue. Theres a thread for s6 on this issue and on 2nd page appears as if someone found a fix having something to do with letting it die completely etc.. http://forum.xda-developers.com/sprint-galaxy-s6/help/constant-rebooting-t3287213
I figured my rebooting issue was corrupted data becausr i was transferring from phone to pc to phone and no md5 check. Though now i will use it. Good luck
After Flashing PI3 (pass on odin), first comes "Samsung Galaxy S6'' logo then installing updates and then error screen.
It goes direct to recovery. Tried wipe cache and all. What to do?
I would try the following:
Once in recovery, go to "POWER OFF" select it.
Let it sit for about 2 mins. Reboot to download mode. Flash the update.
Let it reboot and do its stuff. If it still fails, then a hard reset is in store for you. If that still fails, well, hopefully it doesn't.
elesbb said:
I would try the following:
Once in recovery, go to "POWER OFF" select it.
Let it sit for about 2 mins. Reboot to download mode. Flash the update.
Let it reboot and do its stuff. If it still fails, then a hard reset is in store for you. If that still fails, well, hopefully it doesn't.
Click to expand...
Click to collapse
which update? already flashed the latest ROM from Sammobile
[email protected] said:
which update? already flashed the latest ROM from Sammobile
Click to expand...
Click to collapse
Make sure the MD5 matches, and re-flash again. Something didn't get installed properly this is why you need to flash it again, but from a fully powered down state.
Saafir said:
Sammobile firmwares are outdated and likely your problem. Go over to our General section and download the firmware from Koop1955s Guides & Links thread. Flash it and report back.
Click to expand...
Click to collapse
Koop gets his files from Sammobile. I don't know why you said they are outdated and the problem. They are usually the #1 recommended go to site for firmwares. Koop just reups them to a much faster host for the rest of us. (Which I thank him greatly for!)
The only thing wrong with the OPs file could be things like missing pieces, corrupt download, etc. Either way, getting a fresh file from koop's links is probably the best option due to the faster more reliable download servers. So thank you for sharing the link for the OP.
Saafir said:
Well apparently your Sammobile differs from yours, because there isn't any current software aside from PB6.. good day.
Click to expand...
Click to collapse
You don't need to get all hostile man. Look at the pic. It clearly states the latest version on Sammobile.com's website.
Here's the link, but download speed is an atrocity: http://www.sammobile.com/firmwares/database/SM-G920P/
@elesbb and @Saafir, can't we all just get along?
Actually, I do use Sammobile but I also use the Samsung-firmware.org site as well. Sometimes it is slightly ahead of Sammmobile, but not always. https://samsung-firmware.org/model/SM-G920P/
There are TWO problems with Sammobile. The obvious one is the really slow speeds. The second, and not obvious unless you check, is getting a false result that the download has completed. Happened to me the last time. I was about to post, but then I noticed that the PI3 was smaller than the previous version. Had to re-download and got it complete the second go-round.
The other reason that I post to AFH is that you always get an MD5 to check. I know that we experienced folk check those, but less experienced users don't always check. And Sammobile doesn't show the MD5, so...
Saafir said:
I make a lot of on the fly replies. It wasn't intended to be "hostile" at all. My apologies to elesbb
Click to expand...
Click to collapse
@Saafir, anyone that follows this forum knows that you are the first to help out when someone has a problem. That carries a lot of weight and we appreciate you.
Hello folks,
after marshmallow update my note 4 is acting wired (freeze, restart, sometimes doesn't start etc...). Wakelock app is keeping the phone running but still phone is not performing at it's best. It is slow and sluggish etc...
For some reason if I restart the phone (for ota update etc...) it never turns on. It takes multiple attempt of soft resent and taking battery out and in to turn it on. How to fix this?
I did not make any changes to phone in any ways. I am using what ATT has provided me and recently got it unlocked from ATT. Phone is currently running 6.0.1 with February 1, 2017 security patch level.
Any help is appreciated. If there is any existing thread regarding this issue please redirect me there. I may need step by step guide if the solution includes of changing rom, kernel etc... If I have to change rom then I better be changing it to the finest available in the market.
Thanks again
You likely have an app that is causing problems. Look at settings, battery. Is anything hogging your battery use?
Either selectively uninstall apps, or do a factory reset and slowly add apps until your phone states flipping out.
I and others have had this problem, unfortunately you have to figure out what's causing your problem...
Hit thanks If this has helped you...
Shanghai.Knight said:
You likely have an app that is causing problems. Look at settings, battery. Is anything hogging your battery use?
Either selectively uninstall apps, or do a factory reset and slowly add apps until your phone states flipping out.
I and others have had this problem, unfortunately you have to figure out what's causing your problem...
Hit thanks If this has helped you...
Click to expand...
Click to collapse
Hello, I have run the phone in safe mode but phone acts wired ... Have spent hours with tech support but all they said that I have to update for next update from att. Marshmallow has ruined many note 4.
hatemarshmallow said:
Hello, I have run the phone in safe mode but phone acts wired ... Have spent hours with tech support but all they said that I have to update for next update from att. Marshmallow has ruined many note 4.
Click to expand...
Click to collapse
Try to save your data and factory reset. If that not going to work i would consider to ODIN clean firmware on phone. You can find firmware in one of my post about updates
Clicking from Edge of Galaxy
norbarb said:
Try to save your data and factory reset. If that not going to work i would consider to ODIN clean firmware on phone. You can find firmware in one of my post about updates
Clicking from Edge of Galaxy
Click to expand...
Click to collapse
Hello,
Yes, I did factory resets multiple time but still the situation is same.
I am new to XDA and it's hard for me to navigate or find posts. Can you please share the link where I can get information about the solution you mentioned.
Thanks,
P.D.
hatemarshmallow said:
Hello,
Yes, I did factory resets multiple time but still the situation is same.
I am new to XDA and it's hard for me to navigate or find posts. Can you please share the link where I can get information about the solution you mentioned.
Thanks,
P.D.
Click to expand...
Click to collapse
here is EPH5 ODIN firmware : https://forum.xda-developers.com/no...hmellow-att-server-link-installation-t3407308
norbarb said:
here is EPH5 ODIN firmware : https://forum.xda-developers.com/no...hmellow-att-server-link-installation-t3407308
Click to expand...
Click to collapse
I will check this out tonight and will let you know if that helped.
norbarb said:
here is EPH5 ODIN firmware : https://forum.xda-developers.com/no...hmellow-att-server-link-installation-t3407308
Click to expand...
Click to collapse
I have downloaded 2 files.
1) S2EPK4 to S2EPK5 --This I will transfer to phone sd card, correct?
2) ODIN FILES to get back to EPH5 and latest ODIN
ODIN -- This will be for PC when I connect the phone, correct?
Let me know if I need any more files to download.
All these information is not making much sense to me at this stage but I guess as I work on this I will have grasp of the process.
hatemarshmallow said:
I have downloaded 2 files.
1) S2EPK4 to S2EPK5 --This I will transfer to phone sd card, correct?
2) ODIN FILES to get back to EPH5 and latest ODIN
ODIN -- This will be for PC when I connect the phone, correct?
Let me know if I need any more files to download.
All these information is not making much sense to me at this stage but I guess as I work on this I will have grasp of the process.
Click to expand...
Click to collapse
You are correct about files , but you need more files. EPH5 TO EPK1, EPK1 TO EPK2, EPK2 TO EPK3, EPK3 TO EPK4. All of this files are install from sd-card except EPH5
Clicking from Edge of Galaxy
Clicking from Edge of Galaxy
norbarb said:
You are correct about files , but you need more files. EPH5 TO EPK1, EPK1 TO EPK2, EPK2 TO EPK3, EPK3 TO EPK4. All of this files are install from sd-card except EPH5
Clicking from Edge of Galaxy
Clicking from Edge of Galaxy
Click to expand...
Click to collapse
I was traveling last week. BTW here is the update. I switched off the phone to get it in to recovery mode... it's dead since then... It doesn't turn on.. I tried various usb cables, wall adapters, soft reset, new batteries etc... nothing is working to turn the phone on. Does this mean the phone is gone?
Any update on the device? What was happening before this happened? Turning off the device to put it into recovery shouldn't have created a catastrophic event that would have killed the phone...
Are you in the states? Are you close to a Best Buy? Many Best Buy stores have a "Samsung Experience Center" that can help you with your phone... They can apply latest updates, and do some minor technical troubleshooting...
What happens if you put a different battery in, and plug in a charger? Are you using a Samsung charger? Leave it for a few minutes, is there any indication that it is charging?
Did you, per chance, use one of those portable rechargers? Those can wreak havoc on your battery, as well as the phone's built in charging circuits...
What is the status of the device?
Shanghai.Knight said:
Any update on the device? What was happening before this happened? Turning off the device to put it into recovery shouldn't have created a catastrophic event that would have killed the phone...
Are you in the states? Are you close to a Best Buy? Many Best Buy stores have a "Samsung Experience Center" that can help you with your phone... They can apply latest updates, and do some minor technical troubleshooting...
What happens if you put a different battery in, and plug in a charger? Are you using a Samsung charger? Leave it for a few minutes, is there any indication that it is charging?
Did you, per chance, use one of those portable rechargers? Those can wreak havoc on your battery, as well as the phone's built in charging circuits...
What is the status of the device?
Click to expand...
Click to collapse
Hello,
Before it turned off I have downloaded the zip file for update on sd card and then tried to put it in recovery mode to perform the steps but it never turned on. I travel alot so don't get much time to spend to do all these technical things so temporarily switched my old BB Q10. I did try different batteries, chargers, plugging it in various laptops. It's dead dude. I kind of hate ATT and Samsung now. They push an update on us which ruins the phone and then they ask if I have insurance! I mean like dude are you out of your head?
Yes I am states. I did not know that Best Buy do some troubleshooting, I will take phone to them as soon as I can and will update if they were able to solve the issue. Thanks for that suggestion.
If you didn't get into recovery mode, you didn't even start the update. Sounds like the phone died before anything happened. Just trying to put it into recovery doesn't start the update at all...
Sorry about the phone. Hope it's something simple...
For instance, I had a sticky button that made the down volume stop working. A Qtip and rubbing alcohol solved that...
Hope your phone resurrects some how.
hatemarshmallow said:
Hello,
Before it turned off I have downloaded the zip file for update on sd card and then tried to put it in recovery mode to perform the steps but it never turned on. I travel alot so don't get much time to spend to do all these technical things so temporarily switched my old BB Q10. I did try different batteries, chargers, plugging it in various laptops. It's dead dude. I kind of hate ATT and Samsung now. They push an update on us which ruins the phone and then they ask if I have insurance! I mean like dude are you out of your head?
Yes I am states. I did not know that Best Buy do some troubleshooting, I will take phone to them as soon as I can and will update if they were able to solve the issue. Thanks for that suggestion.
Click to expand...
Click to collapse
It may be too late, but put the phone in the freezer with the battery out for 5 minutes. pull it out and put the battery in and try to turn it on. Works for me, but now everytime I need to restart my phone, it has to go into a freezer.
piluvr said:
It may be too late, but put the phone in the freezer with the battery out for 5 minutes. pull it out and put the battery in and try to turn it on. Works for me, but now everytime I need to restart my phone, it has to go into a freezer.
Click to expand...
Click to collapse
Just got active here again. I did try the freezer thing but didn't work for me. I have found a process where one uses USB JIG to put phones in download mode (if the battery is fully charged or charged enough) if the phone buttons are non responsive. I haveordered it from ebay. Let's hope it works. Once in download mode, I will try to flash it. Looking for the best procedure to flash it. not a technical guy.
I'm really hoping someone can bail me out here before I...
I have made a mess of my new (to me) Note 4. I bought it as an Unlocked GSM. It arrived booting with a Sprint screen. I have Safelink BYOP service. When I switched from my Note2 to Note4, yesterday, an ATnT sim card was used to activate it with Tracfone. Everything seemed to work EXCEPT for MMS - I could not send nor receive pictures. I read -what I thought was- clear instructions here on the forum, I started downloading and attempting to root my phone, hoping that would solve the problem, since tech support had no answers.
I followed the instructions in this post - https://forum.xda-developers.com/note-4-sprint/help/rooting-sprint-note-4-pj1-t3495306 . Now the phone will only boot to download mode, or I can use the up volume button to get to the program to install, restore, etc. I have tried several times - with a couple of different .tar files. This last attempt - I tried to restore it - that also failed. My old eyes can not really see the tiny text but I did see in Odin3 that 1) No MDS found 2) Systemless mode Boot img support required 3) Boot Image Patcher Failed. When I attempt to install the SuperSU, from the thread, it gives me similar errors 1) NO MDS file found 2) (under Boot Image patcher it says FAILURE / Abort after extracting Ramdisk.
If anyone could help me out, I would be most grateful.
JadenEllis said:
I'm really hoping someone can bail me out here before I...
Click to expand...
Click to collapse
I pm you also. Read it first, make sure I'm right.
Then download attached file samfirm.
Here's it's original post, to show how to use, https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Use that program to download the stock firmware for your phone.
Use model number: SM-N910P
Use Region: XAS
Then use Odin to flash stock firmware. All should be good then!
Added Odin! Use this version!
Once you get phone back on stock. I'll show how to root!
Thank You
Thank you so much for the reply. I have downloaded the files you put in my post. I will attempt to do these things now, but I have a question. I stayed up fighting with the phone all night. I probably did some things I shouldn't have? I realized that I was getting stupid and quit, but I did (maybe) put some other stuff on the phone that night. Should I use the Clean or wipe function in TWRP before I do anything else???
Yes, I can boot to downloader or to TWRP. The phone (on its own) is now stuck trying to load with the Note 4 splash screen - but I can boot to either with the vol +/- buttons.
SamFirm did not work. It said Unable to fetch... please check data or enter manually.
aaron74 said:
I pm you also. Read it first, make sure I'm right.
Then download attached file samfirm.
Here's it's original post, to show how to use, https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Use that program to download the stock firmware for your phone.
Use model number: SM-N910P
Use Region: XAS
Then use Odin to flash stock firmware. All should be good then!
Added Odin! Use this version!
Click to expand...
Click to collapse
First - THANK YOU all for the assistance.
Yesterday, none of the suggestions were working, but I kept at it. I was finally able to install the most current Stock tar that I could find. This phone had updated to the most current version available for the phone - it had Marshmallow 6.01. NOW, the red and yellow tamper errors appear to be gone from the Note4 splash screen - BUT, it boots to Sprint Activation so it won't fully load to OS. I read a post about removing the Sprint Hands Free Activation, but it gives two ways of doing so. 1 requires having a rooted phone (I am assuming it is not rooted now?) and the other uses ADN Connect, and I am not sure what that is.
I'm not really sure what to do from here? Any assistance appreciated. Can I start from step 1 of the original post to install SuperSU now?
aaron74 said:
I pm you also. Read it first, make sure I'm right.
Then download attached file samfirm.
Here's it's original post, to show how to use, https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Use that program to download the stock firmware for your phone.
Use model number: SM-N910P
Use Region: XAS
Then use Odin to flash stock firmware. All should be good then!
Added Odin! Use this version!
Click to expand...
Click to collapse
Well, the sun is about to come up - again - but I think I got it! This has been a learning experience to say the least. I wasn't really planning a crash course in Android, but thank you to all who responded. And to :Samep too!
I think I get it
So, after a little rest I have a Note 4 with the most current stock tar. When I left it, at sun up, I had a slightly older stock version and rooted through TWRP 3.0.2.0 and rooted with the latest version of SuperSU. I spent a couple of few hours continuing to read and figure out how I would get it updates. If I could ask just a couple more questions??
If I put the TWRP 3.0.2.0 will the tamper warning come back to the flash screen?
Can I put TWRP on without rooting with SuperSU?
If not TWRP - is there a way to do a full backup without it? I REALLY want to get a good backup of what it has now - a fresh install of the latest 6.01 - and nothing else.
Thank you again.
JadenEllis said:
So, after a little rest I have a Note 4 with the most current stock tar. When I left it, at sun up, I had a slightly older stock version and rooted through TWRP 3.0.2.0 and rooted with the latest version of SuperSU. I spent a couple of few hours continuing to read and figure out how I would get it updates. If I could ask just a couple more questions??
If I put the TWRP 3.0.2.0 will the tamper warning come back to the flash screen?
Can I put TWRP on without rooting with SuperSU?
If not TWRP - is there a way to do a full backup without it? I REALLY want to get a good backup of what it has now - a fresh install of the latest 6.01 - and nothing else.
Thank you again.
Click to expand...
Click to collapse
Sorry bud. I'm so busy. Haven't been online since i message you. Glad you got it.
Rookie messed up..
aaron74 said:
I pm you also. Read it first, make sure I'm right.
Then download attached file samfirm.
Here's it's original post, to show how to use, https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Use that program to download the stock firmware for your phone.
Use model number: SM-N910P
Use Region: XAS
Then use Odin to flash stock firmware. All should be good then!
Added Odin! Use this version!
Click to expand...
Click to collapse
Thanks in advance i appreciate your time
Hello. I have similar issue as described here on this thread. I purchased an unlocked note 4 to run on cricket/att was working fine. Except lte. I tried to root an add nougat an ive screwed up. Somehow ended up in hidden menu. And chabged something made me have no service so i reset didnt work i factory reset data reset switched from global to cdma to lte. An nothing phone says 3g when its in activate your phone menu but does not work. Also it now says im on sprint network in about phone. Please help. Thanks again in advance.
meBn360 said:
Thanks in advance i appreciate your time
Hello. I have similar issue as described here on this thread. I purchased an unlocked note 4 to run on cricket/att was working fine. Except lte. I tried to root an add nougat an ive screwed up. Somehow ended up in hidden menu. And chabged something made me have no service so i reset didnt work i factory reset data reset switched from global to cdma to lte. An nothing phone says 3g when its in activate your phone menu but does not work. Also it now says im on sprint network in about phone. Please help. Thanks again in advance.
Click to expand...
Click to collapse
Sorry I don't get on here much lately. Just seen your post.
Without knowing exactly what you did. I'd say you lost your unlock. If you had an unlocked sprint phone. And tried nougat. I believe i remember that upgrading to nougat was messing up people's EFS partition. And that's where the unlock happens. Did you make a backup?
I always tell everyone, the most important thing you can do is have a full working backup of every partition.
Hope that sheds some light