Just heard Super Mario Run has came out on android but its not showing as supported for my HTC 10 on the play store?? I tried the app from an alternative store and got an error message after being able to do the first level. Why would the HTC 10 not be supported. would a build prop edit make it work?
Edit: Looks like it might be because Im rooted, going to try Magisk.
Edit 2: seems to be working with Magisk installed, still not available on playstore though.
I installed it through the play store without any problem(root-magisk)
fratorga100 said:
I installed it through the play store without any problem(root-magisk)
Click to expand...
Click to collapse
I'm glad this is working for someone.
Perhaps you could add some insight into what my issue may be? I'm sure others might be experiencing it.
I've Magisk v11.6 installed, "Properly rooted" via 2.79 SuperSu.
SafetyNet Failed: CTS Profile mismatch- is occurring though.
I followed these steps, but no success.
What could I try? Does anyone have advice?
I have downloaded it, and played the game successfully. I am stock, non-rooted. I have the unlocked version sold from HTC.
typhoonikan said:
I'm glad this is working for someone.
Perhaps you could add some insight into what my issue may be? I'm sure others might be experiencing it.
I've Magisk v11.6 installed, "Properly rooted" via 2.79 SuperSu.
SafetyNet Failed: CTS Profile mismatch- is occurring though.
I followed these steps, but no success.
What could I try? Does anyone have advice?
Click to expand...
Click to collapse
If you flashed Magisk, it would (attempt to) remove SuperSU and replace it with MagiskSU afaik. Incorrect on my part, apologies. It only removes SuperSU if it is not systemless.
If you have SuperSU, I think that may be the issue but I am not entirely sure. I remember issues with Magisk hide and SuperSU back on an earlier build.
EDIT: Have you togged Super Mario Run in the Magisk hide section of the Magisk Manager app?
tokuzumi said:
I have downloaded it, and played the game successfully. I am stock, non-rooted. I have the unlocked version sold from HTC.
Click to expand...
Click to collapse
Yes, it is working for un-rooted users. Rooted users, not so well in most cases.
Ariac Konrel said:
If you flashed Magisk, it would (attempt to) remove SuperSU and replace it with MagiskSU afaik. Incorrect on my part, apologies. It only removes SuperSU if it is not systemless.
If you have SuperSU, I think that may be the issue but I am not entirely sure. I remember issues with Magisk hide and SuperSU back on an earlier build.
EDIT: Have you togged Super Mario Run in the Magisk hide section of the Magisk Manager app?
Click to expand...
Click to collapse
Yes. I am able to run the tutorial level, then I receive error 804-5100.
typhoonikan said:
I'm glad this is working for someone.
Perhaps you could add some insight into what my issue may be? I'm sure others might be experiencing it.
I've Magisk v11.6 installed, "Properly rooted" via 2.79 SuperSu.
SafetyNet Failed: CTS Profile mismatch- is occurring though.
I followed these steps, but no success.
What could I try? Does anyone have advice?
Click to expand...
Click to collapse
you need magisk SU to be able to use magisk hide and pass safety net. supersu won't work.
Related
I can not install magisk modules and my device constantly loses its root without a reason.
I have the same problem. Magisk seems to be still buggy. But at least I haven't seen the "losing root" issue after disabling "Magisk Hide" in the settings.
Thanks
romhippo.com said:
I have the same problem. Magisk seems to be still buggy. But at least I haven't seen the "losing root" issue after disabling "Magisk Hide" in the settings.
Click to expand...
Click to collapse
Thanks Romhippo.com for responding!
If anyone knows more about it, I'd be happy to know.
Had that issue on a One Plus 3T. Finally updated Magisk in the app and it fixed itself. Was really flakey on root.
larsdennert said:
Had that issue on a One Plus 3T. Finally updated Magisk in the app and it fixed itself. Was really flakey on root.
Click to expand...
Click to collapse
Cool! I hope they also correct here.
Loosing root + possible fix
I was getting the same problem, magisk loosing root and phone getting encryptation problems... making me to format my phone twice.
After i noticed the problem was with magisk 13.3, so i tried to install 13.6 beta but no success, it give me error "Unable to detect boot image" during instalation.
Then i decided to mod magisk zip file (updater_script) , installed then and jrummy busybox (I think oldversions are conflicting with magiskSu)... and now i got 2 days without problem.
Magisk 13.6 beta modded
https://drive.google.com/open?id=0B1UKyTc_LCSOc09UMFhHNVFTd1U
raphamfc said:
I was getting the same problem, magisk loosing root and phone getting encryptation problems... making me to format my phone twice.
After i noticed the problem was with magisk 13.3, so i tried to install 13.6 beta but no success, it give me error "Unable to detect boot image" during instalation.
Then i decided to mod magisk zip file (updater_script) , installed then and jrummy busybox (I think oldversions are conflicting with magiskSu)... and now i got 2 days without problem.
Magisk 13.6 beta modded
https://drive.google.com/open?id=0B1UKyTc_LCSOc09UMFhHNVFTd1U
Click to expand...
Click to collapse
LoL Many thanks for your help. It's all normal here.
I'm going to agree on conflict issues being the likely cause. Between custom roms having su built in like Resurrection remix, SuperSU and standalone magisk, there are plenty of possibilities for messed up boot images.
In fact, 2 things bother me the most.
1. I can not install magisk modules
2. The magisk does not pass SafetyNet.
I do not know if that happens to you.
My Z2 is a verizon one so this is where my advice stops on that phone. I've Magisk on the 3T and pixel only
anyone have a guide to install Magisk?
Refer the following threads completely. Junior answered all my querries. His Moto Brazil blog has systematic and structured guides as well. Very well done.
https://forum.xda-developers.com/z2-play/help/indian-stock-firmware-xt1710-10-t3711423
http://motozbrasil.blogspot.in/search/label/TutorialZ2Play
Upgrading to OOS 4.7.4 has fixed this for me.
Hi guys,
Just got this phone the other day and it seems that I can't get adaway to actually block any ads? I got magisk su, the app works (I can grant it root, it updates the hosts files successfully, I've rebooted, etc) but none of the ads in chrome actually get blocked, for example.
I've done this for every other phone I've previously had without issue, so I was wondering if you have any thoughts around what might be happening?
Thanks.
NSD said:
Hi guys,
Just got this phone the other day and it seems that I can't get adaway to actually block any ads? I got magisk su, the app works (I can grant it root, it updates the hosts files successfully, I've rebooted, etc) but none of the ads in chrome actually get blocked, for example.
I've done this for every other phone I've previously had without issue, so I was wondering if you have any thoughts around what might be happening?
Thanks.
Click to expand...
Click to collapse
Did you tried togling systemless hosts switch in Magisk Manager?
It will be usefull if you inform exact version of OOS, Magisk and Adaway
NSD said:
I've done this for every other phone I've previously had without issue, so I was wondering if you have any thoughts around what might be happening?
Click to expand...
Click to collapse
Have you enabled systemless hosts in Magisk settings?
Edit: someone beat me to it
Flint2 said:
Did you tried togling systemless hosts switch in Magisk Manager?
It will be usefull if you inform exact version of OOS, Magisk and Adaway
Click to expand...
Click to collapse
I have tried with it both enabled and disabled (and with reboots in between). The box in Adaway gets checked automatically as well.
In terms of versions:
OOS: 4.7.2
Magisk: 14.0
Adaway: 3.2
https://app.box.com/s/h43do6fi37x9s8vj8qr0dsstlsw01qw1
try this version of adaway.for me this works.
beaverhead said:
https://app.box.com/s/h43do6fi37x9s8vj8qr0dsstlsw01qw1
try this version of adaway.for me this works.
Click to expand...
Click to collapse
Hmm no dice
NSD said:
Hmm no dice
Click to expand...
Click to collapse
You probably use FreedomOS rom right? More people complained about it from what I've read there
benno4403 said:
You probably use FreedomOS rom right? More people complained about it from what I've read there
Click to expand...
Click to collapse
No, I'm on Oxygen 4.7.2.
Not sure what to tell you. I have stock OOS, rooted with Magisk 14.0, using AdAway 3.2.
Attached are my settings. Check and see?
Thanks everyone for your suggestions. Oddly enough, upgrading to OOS 4.7.4 has fixed this for me. Will update the initial post in case anyone else runs into the same problem.
This update seems like a big deal.
If you've installed this update, please relay your experience with it. Thanks!
Well, I reckon I'll be the guinea pig.
Downloaded, installed and rebooted.
Went from 14.0 to 15.0
Checked Safety Net.
Not sure what else to check, opposed to just daily driving it.
All seems to be well.
are you able to install modules in magisk 15.0
Sam_kaks said:
are you able to install modules in magisk 15.0
Click to expand...
Click to collapse
Kinda apprehensive to try, as I'm on travel away from home.
I could not install either Dolby Atmos, while on 14.0.
Let me see if I can find a small module...
ETA, I tried both Dolby Atmos and the Viper for Magisk 14+.
All failed.
If you want to successfully flash modules using magisk 15+ , you have to do a onetime install of the following f2fs workaround module (flash via TWRP)
https://forum.xda-developers.com/ap...isk-official-version-including-t3577875/page1
How do we upgrade from the @juniorpassos Magisk 13.3 listed in this thread? Is there anything special that needs to be done if just booting TWRP temporarily and flashing a Magisk ZIP from the XDA thread? When I open Magisk on my phone, I see is a "Cannot check for updates, no internet?" message even though I'm definitely on WiFi.
Also, anyone that wants to save me time writing a post asking how to pass SafetyNet check wins my internet love.
Update: I just went ahead and did it. Looks like it's working fine and I was prompted to install something that now makes my phone pass SafetyNet.
Hey guys.
I would like to ask you, if it's possible to use bank apps + root on this device?
I tried it yesterday several times and couldn't get it to work. On my previous phones if worked perfectly.
What I did:
- unlock OP7T
- root with self-made Magisk patched boot
- hide Magisk Manager itself
- hide the bank app
It worked even yesterday on my other phone, before I switched to 7T.
I'm wondering why it doesn't work on 7T and maybe there is some fix for it?
What happens when you try the bank apps? I've used several (US Bank, Chase, Discover, etc.), and haven't had any issues
It could be detecting another root app or even a folder associated with a root app (Pokemon Go does this with the Magisk Folder). Start digging through your storage to see if there's anything that might be root related.
Kollachi said:
Hey guys.
I would like to ask you, if it's possible to use bank apps + root on this device?
I tried it yesterday several times and couldn't get it to work. On my previous phones if worked perfectly.
What I did:
- unlock OP7T
- root with self-made Magisk patched boot
- hide Magisk Manager itself
- hide the bank app
It worked even yesterday on my other phone, before I switched to 7T.
I'm wondering why it doesn't work on 7T and maybe there is some fix for it?
Click to expand...
Click to collapse
Have you installed magisk with another package name (4th voice on settings)?
giacomowrc said:
Have you installed magisk with another package name (4th voice on settings)?
Click to expand...
Click to collapse
Yep did it.
MansonDroid said:
It could be detecting another root app or even a folder associated with a root app (Pokemon Go does this with the Magisk Folder). Start digging through your storage to see if there's anything that might be root related.
Click to expand...
Click to collapse
Nah. Seems to be the same as my other device.
adobrakic said:
What happens when you try the bank apps? I've used several (US Bank, Chase, Discover, etc.), and haven't had any issues
Click to expand...
Click to collapse
Could your try the app i used? Does it work for you?
https://play.google.com/store/apps/details?id=com.starfinanz.mobile.android.pushtan
S-pushTan works fine with root, just tried.
Lupus77 said:
S-pushTan works fine with root, just tried.
Click to expand...
Click to collapse
Strange. Don't get it, why it's not working for me.
Did you try hiding them using Magisk Hide?
cucumbersmell said:
Did you try hiding them using Magisk Hide?
Click to expand...
Click to collapse
Yeah sure.
Try restoring Magisk Manager via Settings and hide Magisk Manager again.
Lupus77 said:
Try restoring Magisk Manager via Settings and hide Magisk Manager again.
Click to expand...
Click to collapse
Did that too. But something doesn't work correctly.
Rootchecker says I'm rooted and also magisk says installed. Also the apps have root rights in magisk. But root doesn't work lol.
I have completely uninstalled magisk and reflashed it again. Root works now. But magisk hide is broken. Maybe OxygenOS is the reason.
Kollachi said:
Did that too. But something doesn't work correctly.
Rootchecker says I'm rooted and also magisk says installed. Also the apps have root rights in magisk. But root doesn't work lol.
I have completely uninstalled magisk and reflashed it again. Root works now. But magisk hide is broken. Maybe OxygenOS is the reason.
Click to expand...
Click to collapse
Oxygen os cant be the reason when its working for everyone else....start everything again afresh. Something you are messing up...i would restore the phone with msmdownload tool to be sure everything is back to normal then start everythung again
v.konvict said:
Oxygen os cant be the reason when its working for everyone else....start everything again afresh. Something you are messing up...i would restore the phone with msmdownload tool to be sure everything is back to normal then start everythung again
Click to expand...
Click to collapse
Yep I thought the same to start with MSMTool.
I never used OxygenOS also on the other OnePlus devices. That's why I thought there is something wrong with it.
BTW which version of magisk do you guys use?
Here it works great. Have hide my bankapp in magisk, than repack magisk have give it the name "funny" now my bankapp works great. I use the latest Canary magisk
Since updating to C.48 (2125 [phone], coming from C.47, my Google Play and Pay have stopped working on my rooted phone (Magisk 24.3), even though it passes SafetyNet with YASNAC. When I try to open Play I get a "Try Again" screen. When I try to open Pay, I get "Google Pay is updating right now...". I've got Universal SafetyNet Fix 2.2.1 and MagiskHide Props Config installed, and Play and Pay in the Deny List. Tried using Shamiko 0.4.4 (while disabling deny) with no better results. Cleared cache and data on both apps multiple times. Uninstalled Magisk and unrooted, and everything worked again. Re-rooted w/o opening either app, put them both into "deny" and, for a brief time, both worked -- but eventually (without my doing anything that I could tell), they both reverted to the behavior described above.
I'm wondering if this behavior has anything to do with the April security update included in C.48? Because it's really odd that I YASNAC still shows safetynet as having passed. More likely, it's user error on my part, but has anyone else run into this yet on C.48?
I have a LE2127 running your firmware and I don't notice issues. One thing you could try is just flashing the update zip over your current OS using the OPlocalupdate apk here https://oxygenos.oneplus.net/OPLocalUpdate_For_Android12.apk
Thanks. I presume you're rooted? Which version of Magisk are you using and are you using Deny List or Shamiko?
rogerinnyc said:
Thanks. I presume you're rooted? Which version of Magisk are you using and are you using Deny List or Shamiko?
Click to expand...
Click to collapse
Yes, I'm rooted. I'm using Denylist on Magisk 24.3.
No problems on my end with Gpay while rooted
I gave up and did a total restore with MSM and then made sure to root and fill up the Deny List (and add SafetyNet Fix) before opening up Google Pay or Play. That seemed to work. Not sure how I messed it up in the first place, but I think it was in upgrading from C47 to C48 and my sequencing of unrooting, upgrading, clearing storage in the apps and re-rooting. Thanks all.