If You are a Victim of BLACK SCREEN RECOVERY?
Then You are in A Right Place......
Hi friends Now a days,there is a series of problem coming with new wildfire s,Unlocked via Htc-Dev.
Ultimately when you peoples are trying to install CWM and getting blackscreen,which stops you to install custom ROMS and all that ....
Just go through this tutorial and get success temporarily(until some permanent success in this regard)
Hi!!
All brothers having black clockmodrecovery....Please pay attention!!!
This solution cannot give you a Visual CWM,But it will work.
I have searched many sites without getting any positive results.
so i have decided to post
my own research
...PLEASE FOLLOW THE STEPS/
1.Unlock your device with htcdev.com.(Ignore if already done)
2.Root Your Device with Unlock Root (Download Here) (ignore if already done)
3.Download this Latest Official CWM Only This version Is working
4.Download This folder Android(adb pack)
5.Extract and copy android.zip to c: and also copy that file you downloaded in step 3 in the same folder.
6.Take your battery out of your device,reinsert it.
7.press Vol-Down and power key..until bootloader appears,let its search PG76IMG.ZIP.
8.After that press power key once to enter FASTBOOT.
9.Connect your device to PC Now FASTBOOT Will Change To FASTBOOT USB
10.Run the command from CMD,and type
c:\ cd android
Then Type
c:\android\ fastboot flash recovery recovery-clockwork-5.0.2.8-marvel.img .
(Ignore above if already Rooted AND Flashed your WFS WITH clockwork-5.0.2.8-marvel.img).
And Now ..
11.Reboot your phone and install cwm rom manager from Google play.
Restart your device again,
12.Go to rom manager And click on Flash ClockworkMod Recovery,let it download and flash recovery again.(idont know y but some users reported as an important step). and restart ur phone.
13.copy and paste the custom rom you want to flash in your sd card(Renaming it as PG76IMG.zip)
Here is the link of Best ever Cutom rom If you dont have any Rename the zip to PG76IMG .
14.Go to rom manager and tap to install rom from sd and locate the PG76IMG.zip.
(after selecting the PG76IMG.zip a ROM Pre- Installation pop will ask you to wipe Data and chache,and wipe Dalivik chache please tick the both) Backup existing rom is not recommended because it takes much time
15.When PHONE will restarts it will show only the four white keys with complete black screen,Without touching the keys wait for 20 mints as it is.(if restarts you will get your custom rom flashed)......if not...
Remove the battery and normaly switch on your phone and repeat the step 6.
this time it will surely get flashed within 10 mints.
Do remember if custom rom flashing dosent starts and interrupted,your device will be safe. if it starts flashing and interrupted in between and you are not willing to start your phone normally.
Then Follow This tutorial and Make your Mobile Phone working again
Remember : if you will select backup current rom it will take another 20 mints.(i will not suggest you to do so)
N JOY BLACK WILDFIRE S
IDNT KNOW WILL THIS TRICK WORKING ON OTHER BRANDS OR MODELS? Plz let me know if working .(IF THEY R ALSO Experencin same black screen.)
Fully Tested on New HTC WILDFIRE S.
Please hit Thanks If you found this post helpful.
Hi...
Just your tutorial but still nothing...put my Custom Rom on my Sd card...opened Rom Manager...install from sd...phone reboots black screen...just the 4 navigation keys lights...and nothing else...firstly waited about 30 min...then removed my battery and switch on the phone...again black screen...waited about 20 min..then the again removed battery...switch on phone...it started normally with all my things loaded...no change...
Phone Details..
S-Off Rooted with Unlock Root
HBoot : 1.08.0000
Android Version : 2.3.5
HTC Sense Version : 2.1
Software Version : 2.13.401.2
Baseband Version : 47.23a.35.3035H_7.53.39.03M
cutkiller974 said:
Hi...
Just your tutorial but still nothing...put my Custom Rom on my Sd card...opened Rom Manager...install from sd...phone reboots black screen...just the 4 navigation keys lights...and nothing else...firstly waited about 30 min...then removed my battery and switch on the phone...again black screen...waited about 20 min..then the again removed battery...switch on phone...it started normally with all my things loaded...no change...
Phone Details..
S-Off Rooted with Unlock Root
HBoot : 1.08.0000
Android Version : 2.3.5
HTC Sense Version : 2.1
Software Version : 2.13.401.2
Baseband Version : 47.23a.35.3035H_7.53.39.03M
Click to expand...
Click to collapse
Forget about the post above finally...I've stopped having black screen I don't know how but there's something I've noticed...see:
***Unlocked*** - New Thing
Marvel S-OFF
Hboot - 1.09.0099 - New Thing
And now when I select recovery mode...I have this...
First an android phone down with a green logo like something sync and inside it an arrow upside down maybe download...then after that it disappears to show another Android Phone....and next to it there's a Triangle with an Exclamation Mark in it...so what have I done wrong...??
i think that's stock recovery that's not yet cwm have you flashed it is step 10???
NOT SOLVED! You need to change the title of this thread!
I have the same problem with my brand new Wildfire S.
I try to enter in CWM and it turns black. Almost bricked it with the solution above. I had to reinstall system.img and recovery.img manually with fastboot to fix it.
Mine arrived yesterday. My wife has the same phone but a few months older. Running CWM without issues.
Rommanager acknowledged that CWM is installed.
We need to find a solution for this. It is really a pain in the... . Just imagine you cannot recover your phone.
ngoralph said:
i think that's stock recovery that's not yet cwm have you flashed it is step 10???
Click to expand...
Click to collapse
Can I use it to install custom roms as when I flash it with CWM 5.0.2.8 that's when my screen turns black so after getting this I flashed it with the
OTA_Marvel_S_HTC_Europe_2.26.401.3-2.13.401.3_release_2617117
extracted the Firmware.zip and renamed it to PG76IMG.zip and it updated my HBoot to 1.09.0099 which was previously 1.08.0000.
as far as i know you cant really install anything from stock recovery u can flash recovery using the steps above
---------- Post added at 08:45 PM ---------- Previous post was at 08:45 PM ----------
CatOnAndroid said:
NOT SOLVED! You need to change the title of this thread!
I have the same problem with my brand new Wildfire S.
I try to enter in CWM and it turns black. Almost bricked it with the solution above. I had to reinstall system.img and recovery.img manually with fastboot to fix it.
Mine arrived yesterday. My wife has the same phone but a few months older. Running CWM without issues.
Rommanager acknowledged that CWM is installed.
We need to find a solution for this. It is really a pain in the... . Just imagine you cannot recover your phone.
Click to expand...
Click to collapse
Same here almost bricked my phone and was traumatized to do it again
cutkiller974 said:
Forget about the post above finally...I've stopped having black screen I don't know how but there's something I've noticed...see:
***Unlocked*** - New Thing
Marvel S-OFF
Hboot - 1.09.0099 - New Thing
And now when I select recovery mode...I have this...
First an android phone down with a green logo like something sync and inside it an arrow upside down maybe download...then after that it disappears to show another Android Phone....and next to it there's a Triangle with an Exclamation Mark in it...so what have I done wrong...??
Click to expand...
Click to collapse
Try these steps you will be Back to your stock rom...
http://forum.xda-developers.com/showthread.php?t=1467844
when your phone restarts with its factory state. Then root it following step 2 above.
cutkiller974 said:
Can I use it to install custom roms as when I flash it with CWM 5.0.2.8 that's when my screen turns black so after getting this I flashed it with the
OTA_Marvel_S_HTC_Europe_2.26.401.3-2.13.401.3_release_2617117
extracted the Firmware.zip and renamed it to PG76IMG.zip and it updated my HBoot to 1.09.0099 which was previously 1.08.0000.
Click to expand...
Click to collapse
step you have done after the cwm recovery was the first step to unlock ur Bootloader.
read my post carefully belive me its works.
ngoralph said:
as far as i know you cant really install anything from stock recovery u can flash recovery using the steps above
---------- Post added at 08:45 PM ---------- Previous post was at 08:45 PM ----------
Same here almost bricked my phone and was traumatized to do it again
Click to expand...
Click to collapse
above steps are not a miracle.
Its a way cwm install Custom recovery from Ui of your phone,and relax i have not tempered or shared any links which are incompatible.
Its a way thats it ,its a default process of cwm for which it is designed for.
what a change here is you cant see anything,but cwm is still doing its work inside.
Ihave done several reserch and finally found that HTC has changed or improved Its Video Chip or firmware. which is incompatible with Cwm currently.
Above situations you have explained are not a sign of bricked phone dear...
follow this thread and make your device awake.
http://forum.xda-developers.com/showthread.php?t=1467844.
Remember bricking your phone means,(No way to make your phone alive) and this happens when bootloader is erased,in my case bootloader cant be uprooted in any circumstances.
so feel free work on these steps.
ngoralph said:
as far as i know you cant really install anything from stock recovery u can flash recovery using the steps above
---------- Post added at 08:45 PM ---------- Previous post was at 08:45 PM ----------
Same here almost bricked my phone and was traumatized to do it again
Click to expand...
Click to collapse
above steps are not a miracle.
Its a way cwm install Custom recovery from Ui of your phone,and relax i have not tempered or shared any links which are incompatible.
Its a way thats it ,its a default process of cwm for which it is designed for.
what a change here is you cant see anything,but cwm is still doing its work inside.
Ihave done several reserch and finally found that HTC has changed or improved Its Video Chip or firmware. which is incompatible with Cwm currently. I have even reported this error to Koushik Dutta(Owner of CWM)
rajanand said:
above steps are not a miracle.
Its a way cwm install Custom recovery from Ui of your phone,and relax i have not tempered or shared any links which are incompatible.
Its a way thats it ,its a default process of cwm for which it is designed for.
what a change here is you cant see anything,but cwm is still doing its work inside.
Ihave done several reserch and finally found that HTC has changed or improved Its Video Chip or firmware. which is incompatible with Cwm currently. I have even reported this error to Koushik Dutta(Owner of CWM)
Click to expand...
Click to collapse
has the owner of cwm got back to you yet?
aggazz said:
has the owner of cwm got back to you yet?
Click to expand...
Click to collapse
No Not Yet!!
rajanand said:
No Not Yet!!
Click to expand...
Click to collapse
ok!!
cutkiller974 said:
Forget about the post above finally...I've stopped having black screen I don't know how but there's something I've noticed...see:
***Unlocked*** - New Thing
Marvel S-OFF
Hboot - 1.09.0099 - New Thing
And now when I select recovery mode...I have this...
First an android phone down with a green logo like something sync and inside it an arrow upside down maybe download...then after that it disappears to show another Android Phone....and next to it there's a Triangle with an Exclamation Mark in it...so what have I done wrong...??
Click to expand...
Click to collapse
You have found ***Unlocked***
Marvel S-OFF
Hboot - 1.09.0099
Bcoz you have unlocked your bootloader from Htc dev.
Now you have full rights to root your phone(ability to do changes in system files)
now if you want to install custom Rom for more features do the above steps carefully.)
cutkiller974 said:
Can I use it to install custom roms as when I flash it with CWM 5.0.2.8 that's when my screen turns black so after getting this I flashed it with the
OTA_Marvel_S_HTC_Europe_2.26.401.3-2.13.401.3_release_2617117
extracted the Firmware.zip and renamed it to PG76IMG.zip and it updated my HBoot to 1.09.0099 which was previously 1.08.0000.
Click to expand...
Click to collapse
Now it will work!!
Do the above process!!
rajanand said:
Get Black screen Recovery Working Noww........
Hi friends Now a days there is a series of problem Going on to the new
wildfire s,Unlocked via Htc-Dev.
Ultimately when you peoples are trying to install CWM and getting blackscreen,which stops yoou to install custom ROMS and all that ....
Just go through this tutorial and get success temporarily(until some permanent success in this regard)
Hi!!
All brothers having black clockmodrecovery....Please pay attention!!!
This solution cannot give you a Visual CWM,But it will work.
I have searched many sites but of no use.
This is my own research
...PLEASE FOLLOW THE STEPS/
1.Unlock your device with htcdev.com.(Ignore if already done)
2.Root Your Device with Unlock Root (Download Here) (ignore if already done)
3. download this Latest Official CWM Only This version Is working
4.Download This folder Android(adb pack)
5.extract and copy android.zip to c: and also copy that file you downloaded in step 3 in the same folder.
6.Take your battery out of your device,reinsert it.
7.press Vol-Down and power key..until bootloader appears,let its search PG76IMG.ZIP.
8.after that press power key once to enter FASTBOOT.
9.connect your device to PC.
10. run the command from CMD,and type c:\ cd android
then type c:\android\ fastboot flash recovery recovery-clockwork-5.0.2.8-marvel.img .
(Ignore above if already Rooted your WFS WITH clockwork-5.0.2.8-marvel.img).
Now ..
reboot your phone and install cwm rom manager .
11.copy and paste the custom rom you want to flash in your sd card.Here is the link of Best ever Cutom rom If you dont have any Rename the zip to PG76IMG .
12.go to rom manager and tap to install rom from sd.
12a. Do remember if custom rom flashing dosent starts and interrupted your device will be safe. if it starts flashing and interrupted in between and your are not willing to start your phone normally .Then Follow This tutorial and Make your Mobile Phone working again
13.when PHONE will restarts it will show only the four white keys with complete black screen,wait for 20 mints as it is.(if restarts you will get your custom rom flashed)......if not...
14.remove the battery and normaly switch on your phone and repeat the step 6.
this time it will surely get flashed within 10 mints.
remember if you will select backup current rom it will take another 20 mints...
N JOY BLACK WILDFIRE S
IDNT KNOW WILL THIS TRICK WORKING ON OTHER BRANDS OR MODELS.(IF THEY R ALSO Experencin same black screen.)
fully Tested on New HTC WILDFIRE S.
Plz hit Thanks If you found this post helpful.
Click to expand...
Click to collapse
I've tried it...no result 1st time it reboot i've let it like it is for more than 30 min....black screen and only 4 navigation keys lights...then after that removed the battery...the phone starts normally...it does not go into recovery again.....I'm trying to put Wildchild 2.0 Full Odex
cutkiller974 said:
I've tried it...no result 1st time it reboot i've let it like it is for more than 30 min....black screen and only 4 navigation keys lights...then after that removed the battery...the phone starts normally...it does not go into recovery again.....I'm trying to put Wildchild 2.0 Full Odex
Click to expand...
Click to collapse
Rename the Wildchild 2.0 Full Odex.zip to PG76IMG.zip.
before rebooting to recovery make sure that ROM MANAGER HAV super user acess.
i hav also failed several time bcoz of this su permissions.
make sure ur are deleteing dalvik,etc are checked.
this is a reply 1
Yesterday I got my second Wildfire S with the firmware version 2.13.401.3 and I have successfully unlocked my bootloader via HTCDev. The flash process from the ClockworkMod 5.0.2.8 is completed successfully but the screen stays black for me too. Now I had tried this tutorial but it does not work for me. Then I had the HTC update the firmware version 2.26.401.3 and flashed now I can not even get root privileges. I had read something here now because of the Dalvik cache Wipen but what is the ADB to command? Thank you in advance!
Sorry for my bad english, I come from Germany!
Is there a method for changing the rogers splash screen? I figured out how to do the regular boot animation and now I just need this.
edit: found another thread on this, could a passing mod please delete.
How? If you manage to get a new splash, please post here No delete!
can you also point me towards how to change the boot animation ?
On Osimood, the boot animation is located at /system/media/sanim.zip so just put your new boot animation in those coordinates (backup the old one first if you want). I used root browser to do so, its in the market.
And unfortunately, I've yet to figure out the splash screen. But there is a thread in the general section on the subject that I'm watching hopefully.
Hi,
I would like to pay someone that could help me doing the following:
I have a Vido N90IPS tablet:
http://www.anybuying.com/media/cata...525d08d6e5fb8d27136e95/v/i/vido-n90-ips-1.jpg
I downloaded the following custom ROM which works great on the tablet:
http://www.arctablet.com/blog/forum...ao-n90-ips-tablet-root-android-4-2-2-custom-f
What I want to achieve is that the tablet boots with my own logo. From powering on the tab until it hits the start screen. I think there are three places where it requires the change of the logo. I also need an animated logo in the right place and need information on what format is needed for the animated logo which I can provide.
I want later on to be able to flash this either through RKAndroidTool or CWM, which one is possible.
Please send a PM.
u can edit
boot.img in it u might find ####.RLE
this is boot logo
in system/bin or system/media u might find bootanimation or bootanimation.zip
the base of all is PNG though
Sent from my Acer S500 CloudMobile
i had installed custom recovery and i was going to install the lollipop pac-rom (http://forum.xda-developers.com/showthread.php?t=2348415) after using cmd to boot the boot.img from the rom, the guide i had been reading (http://forum.xda-developers.com/showpost.php?p=38933080&postcount=1) had said to reboot and i did so. After the reboot my phone had gone through htc logo then a black screen, the guide had also said "wait some minuets" so thats what i had assumed it was doing. after leaving it alone for about 10 minuets i had thought there had been an error. i tried booting the boot.img from another rom to see if it would even start, it now gets to the verizon symbol stays on that for a while then restarts. if there is any way for me to access my storage to put another rom on the phone or a way to revert it back to stock (preferably keeping the custom recovery) that would be appreciated very much.
fancy feast said:
i had installed custom recovery and i was going to install the lollipop pac-rom (http://forum.xda-developers.com/showthread.php?t=2348415) after using cmd to boot the boot.img from the rom, the guide i had been reading (http://forum.xda-developers.com/showpost.php?p=38933080&postcount=1) had said to reboot and i did so. After the reboot my phone had gone through htc logo then a black screen, the guide had also said "wait some minuets" so thats what i had assumed it was doing. after leaving it alone for about 10 minuets i had thought there had been an error. i tried booting the boot.img from another rom to see if it would even start, it now gets to the verizon symbol stays on that for a while then restarts. if there is any way for me to access my storage to put another rom on the phone or a way to revert it back to stock (preferably keeping the custom recovery) that would be appreciated very much.
Click to expand...
Click to collapse
edit; There is a separate Verizon HTC One (M7) forum
roms may not be cross compatible.
see
Frequently Asked Questions
This thread will be moved to Verizon HTC One (M7) Q&A, Help & Troubleshooting
---------- Post added at 03:00 PM ---------- Previous post was at 02:52 PM ----------
see edit.
Our mount points are different. Please install one of the roms in this section to get your phone up and running again. You can also run an ruu if you wish to go back to stock hassle free. Second spoiler of Q8 has a link to the ruu with instructions.
Sent from my HTC6500LVW using XDA Free mobile app
I had TWRP 2.8.7.0 working fine, but tried upgrading to 3.0 -
That had a weird issue where twrp would show the splash screen, the screen would intermittently turn off and on, and keep showing the splash screen, but never entered recovery.
Decided to revert to 2.8.7.0 using flashify... Now when I try to create a nandroid backup in 2.8.7.0, it starts working and then shows the twrp splash screen, and as in 3.0 the screen intermittently turns on and off.
Anyone experienced something like this before? Kind of unsure how to proceed.
Update: now it does the screen intermittently flashing on and off, stuck on twrp flash screen just trying to enter twrp.
Also tried removing SD-Card with no luck
Update2: The behavior is pretty much identical to what's seen in this video https://www.youtube.com/watch?v=Kr46ugrpL6U , except it only happens in recovery (I can enter the os normally if i dont attempt to go into recovery)
This has been common problem with twrp from the looks of it. Right now when I boot to twrp 2.7.x.x I get stuck at the twrp splash. However my problem I can't find any info on your there looks to be two terminal commands you can run to fix it..... Seeing this post I wanted to ask about mine at the same time couldn't hurt do to its starting to look related to the recovery boot loop. But like I said I'm just stuck at it not looping.... very odd.
---------- Post added at 03:14 PM ---------- Previous post was at 03:02 PM ----------
OK mine was sad and simple.... I formatted my SD card back to portable storage and poof it now boots to recovery don't know if it could be related but it's worth a shot!
cmjester6421 said:
This has been common problem with twrp from the looks of it. Right now when I boot to twrp 2.7.x.x I get stuck at the twrp splash. However my problem I can't find any info on your there looks to be two terminal commands you can run to fix it..... Seeing this post I wanted to ask about mine at the same time couldn't hurt do to its starting to look related to the recovery boot loop. But like I said I'm just stuck at it not looping.... very odd.
---------- Post added at 03:14 PM ---------- Previous post was at 03:02 PM ----------
OK mine was sad and simple.... I formatted my SD card back to portable storage and poof it now boots to recovery don't know if it could be related but it's worth a shot!
Click to expand...
Click to collapse
Unfortunately I don't think it's the same, because I still have issues even with the SD card removed. Also, I'm on lollipop if that helps.
I remember that happened once to me in a Samsung device. But eve worst, my device was unable to boot into OS. What I did was put download mode and flashed any version that was easy to root. Then, root, flash recovery TWRP, and then used a nandroid backup. You can apply same procedure on this LG G3 and you'll be back on the game.
Enviado desde mi LG-D851 mediante Tapatalk