[ROM][7.1.x|SM-P901| Unofficial LineageOS 14.1 (v1a3g) - Galaxy Note Pro 12.2 Android Development

[ROM][7.1.x|SM-P901| Unofficial LineageOS 14.1 (v1a3g) - Galaxy Note Pro 12.2 Android Development

LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1.x (Nougat), which is designed to increase performance and reliability over stock Android for your device.
It is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
This thread is for Unofficial LineageOS 14.1 builds for v1a3g (SM-P901). The following will not be supported here:
Custom kernels
Mods
Xposed
I don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
First time flashing LineageOS 14.1 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash LineageOS
Install the Google Apps addon package (Optional)
Reboot
Current Build:
20/03/17 build
Use ROMS in Weekly Builds below.
Older Builds:
Weekly Builds
Weekly SM-P901 Builds
Google Apps:
http://opengapps.org/
Want Root access? Flash this!
LineageOS SU Addon
Flahed the SU Addon and now you want to remove it? Flash this!
LineageOS su addon Remover
20/03/2017
Changelog
More Changes
Older Changelog:
BUGS
Other Bugs: You tell me!
Other issues?
Before posting in this thread, make sure of a few things:
You used the search function of the forums.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread.
Logs! You can use this: https://play.google.com/store/apps/d....tortel.syslog
@UpInTheAir for his kernel magic and misc fixes
@crpalmer (for picassowifi device and kernel gits)
@eousphoros (for his work on klimtwifi)
@nvertigo67 (for his work on chagallwifi)
@Nexorrr (for his work on chagalllte)
Exynos5420 Dev Team (@deadman96385 @thompatry @ZakooZ @Orion116 @mosimchah
@joshndroid @Andmoreagain @thermskin, @javelinanddart, @tincho5588)
Source Code:
Kernel
https://github.com/exynos5420/android_kernel_samsung_exynos5420
Device Tree
https://github.com/exynos5420/android_device_samsung_v1awifi

Update for Chinese version of P901:
If you have a Chinese version of the P901, please look at Post #129.
Thanks to @eliotargy for providing the solution.

Reserved 2

thank you very much
really rom 7.1.1 thank you very much You are really creative I wish more And follow-up To update thank you:good::good::good:

diaaart said:
really rom 7.1.1 thank you very much You are really creative I wish more And follow-up To update thank you:good::good::good:
Click to expand...
Click to collapse
You're welcome. A lot of great people were involved in this ROM. I owe them a lot.
Enjoy the ROM

Please add root
Please add root for Flash addonsu-arm But without root

diaaart said:
Please add root for Flash addonsu-arm But without root
Click to expand...
Click to collapse
Root can be enabled in developer options

haha, Now I can install Unofficial LineageOS for my P901 ) >.< Using P900 rom makes me feel the battery is kinda weak >.< hope this will be better. Thanks for this rom <3

Thank you so much
Thanks for working with me root After activation developer options:good:
Thank you so much :good::good:

tuipro said:
haha, Now I can install Unofficial LineageOS for my P901 ) >.< Using P900 rom makes me feel the battery is kinda weak >.< hope this will be better. Thanks for this rom <3
Click to expand...
Click to collapse
diaaart said:
Thanks for working with me root After activation developer options:good:
Thank you so much :good::good:
Click to expand...
Click to collapse
You are welcome.
Enjoy the ROM.

Just added a link for weekly builds which happen every Friday at 8 pm CST.

thank you for this wonderful move
i am using sm-p902 , Turkish special version based on sm-p901
So i could install it by ;
download zip and extract
go to
lineage-14.1-20170325-UNOFFICIAL-v1a3g\META-INF\com\google\android
path and open
updater-script
with notepad++ and delete this line completely ( 2. line )
assert(getprop("ro.product.device") == "v1a3g" || getprop("ro.build.product") == "v1a3g" || getprop("ro.product.device") == "v1a3gxx" || getprop("ro.build.product") == "v1a3gxx" || abort("E3004: This package is for device: v1a3g,v1a3gxx; this device is " + getprop("ro.product.device") + ".");
and save.
And create zip file again .
I could successfully installed lineage 14.1-20170325 android 7.1.1
however i can not use phone call functionality . i can not call from my mobile phone to tablet. Or tablet to mobile phone.
i can use mobile network and sending sms.
sometimes it does not recognize sim card , i need to restart tablet
or sometimes if i try to call a number, tablet restart itself
Anyway , thank you for this great work

f1b0n4cc1 said:
thank you for this wonderful move
i am using sm-p902 , Turkish special version based on sm-p901
So i could install it by ;
download zip and extract
go to
lineage-14.1-20170325-UNOFFICIAL-v1a3g\META-INF\com\google\android
path and open
updater-script
with notepad++ and delete this line completely ( 2. line )
assert(getprop("ro.product.device") == "v1a3g" || getprop("ro.build.product") == "v1a3g" || getprop("ro.product.device") == "v1a3gxx" || getprop("ro.build.product") == "v1a3gxx" || abort("E3004: This package is for device: v1a3g,v1a3gxx; this device is " + getprop("ro.product.device") + ".");
and save.
And create zip file again .
I could successfully installed lineage 14.1-20170325 android 7.1.1
however i can not use phone call functionality . i can not call from my mobile phone to tablet. Or tablet to mobile phone.
i can use mobile network and sending sms.
sometimes it does not recognize sim card , i need to restart tablet
or sometimes if i try to call a number, tablet restart itself
Anyway , thank you for this great work
Click to expand...
Click to collapse
Thanks for the feedback.
Download syslog from the play store, install it, give it root access then reboot.
Try using phone. Then run syslog and post here.
Am not saying it can be fixed but I would like to know the errors.

Thank you! The new version released (25/03/2017)!
I see a bug! When device restarted show setting force close, but continue fine!

It's being worked on...have patience young padawan (may the force be with you)

Any fix for phone calls for sm-901?
First of all thanks for the effort to bring nougat to this wonderful tablet.
I followed the steps to install the ROM and it is working with the exception of the phone function, the tablet can make and receive phone calls and SMS, but for the phone calls there is no sound as if the mic and speakers get muted,I know it is known issue but I am wandering if anyone has a fix for it.
The other thing I noticed also is the wifi connection drop that is sparodic, sometimes with high frequency especially when the tablet is on for a long time.
Thanks again.

yamosaad said:
First of all thanks for the effort to bring nougat to this wonderful tablet.
I followed the steps to install the ROM and it is working with the exception of the phone function, the tablet can make and receive phone calls and SMS, but for the phone calls there is no sound as if the mic and speakers get muted,I know it is known issue but I am wandering if anyone has a fix for it.
The other thing I noticed also is the wifi connection drop that is sparodic, sometimes with high frequency especially when the tablet is on for a long time.
Thanks again.
Click to expand...
Click to collapse
You do know there are weekly updates, yes?
I just tried a version I made yesterday and audio works for phone calls.
Maybe install the latest version - see Post #1 for details on how to get weekly updates.

thanks for your good work :good:
these are some issues that I'm experiencing:
1. The GPS is not working
2. In Language & input setting, I can not enable "Show icon when using stylus" option
3. After I installed the ROM, I made a phone call.
When I spoke in front of the tablet, I heard little bit of sound.
But when I spoke directly on the mic (a hole beside the infrared blaster), I heard the sound clearly.
After I played with loud speaker and mute mic toggle (still in the same phone call), until now I can not recreate the scenario above (the mic does not work at all, no sound can be heard)
I hope this could help with the development.
I'm sorry for my bad explanation.

gcrutchr said:
You do know there are weekly updates, yes?
I just tried a version I made yesterday and audio works for phone calls.
Maybe install the latest version - see Post #1 for details on how to get weekly updates.
Click to expand...
Click to collapse
I installed the 8th of April build and the phone is working now , many thanks
Now I can see there is newer build but I can't decide whether or not to install it as I cannot find a link to the change log in the first page of this thread, any advice on whether or not to install the weekly builds is appreciated.

yamosaad said:
I installed the 8th of April build and the phone is working now , many thanks
Now I can see there is newer build but I can't decide whether or not to install it as I cannot find a link to the change log in the first page of this thread, any advice on whether or not to install the weekly builds is appreciated.
Click to expand...
Click to collapse
I would suggest installing weekly builds. If you are concerned about bugs being introduced in weekly builds, do a ROM backup from TWRP first. If you do not like the weekly build, you can do a restore.

Related

[ROM][4.4.4] CyanogenMod 11.0 for A3000-H [23/10/2015]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PREAMBLE
Here is my CM11 port for the Lenovo A3000-H, 100% unofficial. Contributions are welcome!
To be able to even flash it, you'll need to use my CWM Recovery.
NOTE: I have built and tested this on my Lenovo A3000-H (16 GB version with 3G). Before flashing, please make sure to be on Stock 4.2. Open up a terminal or an ADB shell and type the following:
Code:
getprop ro.product.board
.
Should you get a3000_prc_3gfull, you are good to go. Otherwise, you need to flash the right Stock ROM. The members @kupyxa4444 and @luckasfb have created such a Stock-based ROM, so if you are unable to find one - try to contact one of these two.
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
NOT WORKING
Camera
WORKING
GPS
WiFi
Audio
Boots
SELinux
Sensors
Vibration
Bluetooth
HWComposer
Offmode charging
sw video en/decoding (not hw)
Internal and external sdcards
RIL/radio (only on SIM1, SIM2 is still broken and therefore disabled, you can re-enable it by setting persist.radio.multisim.config=dsds in your build.prop)
NOTE
Should you ever face any issues (in the recovery or the ROM), provide logs (use Google to find out how to gather those). Additionally, I need to know what ROM you're on, hence you have to mention the build number.
Hint: "It doesn't work or I get error Status XY" are not bug reports and will be ignored. To keep the thread clean, use DevDB for real bug reports
DOWNLOAD
Instructions:
ordinarystar said:
Pre-equisites to flash:
1. Correct Firmware
1.1 First verify your build version by installing Terminal Emulator from Play Store and then type the following:
getprop ro.product.board
if the output is a3000_prc_3gfull, proceed to number 2.
1.2 if the output is not a3000_prc_3gfull, you will have to first flash another firmware which can be downloaded at:
https://drive.google.com/file/d/0B5yhZ9sXUH_GMWhCQllhbkZRbUk/edit
Firmware flashing instructions can be referred here:
http://forum.xda-developers.com/lenovo-a3000/development/rom-lenovo-ideatab-a3000-h-call-t2441135
2. My version of CWM installed
2.1 Now you should install the CWM. You need a rooted device to proceed. Assuming you followed 1.1 and 1.2, your device is already rooted.
You will need:
2.1.1 Install mobileuncle MTK Tools from PlayStore or download apk from thread below: http://forum.xda-developers.com/showthread.php?t=2697236
2.1.2 My CWM, download the zip file and extract the recovery.img. Put the recovery.img in your microSD card.
http://olivier.hubdroid.com/a3/cwm/cwm_a3-20141220.zip
2.2 Open up mobileuncle MTK Tools, and select install recovery. It will detect the recovery.img in your microSD card (top in the list).
Tap on it to install. DO NOT tap on others in the list. Just click OK to install. If you have already downloaded my rom with it placed in your microSD card,
you may proceed to boot into recovery, or you can press cancel and shut down your device.
The pre-equisites is now completed!
Steps to flash:
1. Download my rom from http://olivier.hubdroid.com/a3/cm-11.0/ - select a preferred release. latest release recommended.
2. Download gapps from http://forum.xda-developers.com/android/software/gapps-consolidated-gapps-thread-t3064693 - select gapps for kit kat 4.4.4
2. Boot up recovery: hold power button and volume up button, as it booted up release power button. Use volume up button to browse to "recovery mode" and press volume down to proceed recovery mode.
3. Do the following:
2.1 Factory reset
2.2 Clear cache
2.3 Clear dalvik cache (Advanced > clear dalvik cache)
2.4 install from zip, select the rom and install
2.5 install gapps.
2.6 when done, reboot to system
The installation is now completed!
Click to expand...
Click to collapse
I have spent a lot of time on this project and I still do - hence, donations would be highly appreciated.
My builds can be found here.
SOURCEs
Device tree (branch cm-11.0)
Kernel (branch cm-11.0)
OmniROM Gerrit (topic mt6589)
CREDITs
chrmhoffmann
kashifmin
Grarak
xplodwild
Dr-Shadow
superdragonpt
EnerJon
kupyxa4444
XDA:DevDB Information
CyanogenMod 11 for the Lenovo A3000-H, ROM for the Lenovo A3000
Contributors
Olivier
Source Code: https://github.com/lenovo-a3-dev
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Beta
Created 2014-11-26
Last Updated 2015-10-23

Changelog
BUILD STATUS
Willing to contribute? Just drop me a PM, send me pull requests on GitHub or join my IRC channel on freenode: #cm-a3!
Please don't clutter the thread, post your bug reports here instead. Thanks!
CHANGELOG
Code:
[B][U]29/07/2015:[/U][/B]
[list][*][B][COLOR="Blue"]kernel: [/COLOR][/B]Fixed automatic rotation
[*][B][COLOR="Blue"]kernel: [/COLOR][/B]Security patches/fixes
[*][B][COLOR="Blue"]kernel: [/COLOR][/B]Removed scsi_wait_scan module
[*][/list]
[B][U]02/02/2015:[/U][/B]
[list][*]Fixed sw encoding and decoding ([B][COLOR="Lime"]YouTube videos etc work now![/COLOR][/B])
[*][B][COLOR="Blue"]kernel: [/COLOR][/B]Reverted to LZMA compression (for TWRP)
[*][B][COLOR="Blue"]kernel: [/COLOR][/B]Security patches/fixes
[*][B][COLOR="Blue"]kernel: [/COLOR][/B]Misc patches for ext4, crypto
[*][B][COLOR="Blue"]kernel: [/COLOR][/B]Added support for kernel mode NEON
[*][/list]
[B][U]28/12/2014:[/U][/B]
[list][*][B][COLOR="Blue"]kernel: [/COLOR][/B]Switched to LZ4 compression (instead of LZMA)
[*][B][COLOR="Blue"]kernel: [/COLOR][/B]Added BFQ/SIO/FIOPS/ZEN/VR IO Schedulers
[*][B][COLOR="Blue"]kernel: [/COLOR][/B]Added overall stats for all available cores
[*]Fixed battery capacity (item in framework-res)
[*][/list]
[B][U]26/12/2014:[/U][/B]
[list][*]Switched back to deodexed build on community request
[*]Removed recovery-from-boot.p (we don't really want this)[/list]
[B][U]20/12/2014:[/U][/B]
[list][*]Fixed Internal sdcard[/list]
[B][U]17/12/2014:[/U][/B]
[list][*]Fixed HWComposer
[*]Odexed build for better performance[/list]
[B][U]16/12/2014:[/U][/B]
[list][*]Fixed NVRAM
[*]Fixed Bluetooth
[*]Fixed RIL[/list]
[B][U]26/11/2014:[/U][/B]
[list][*]Initial public release.[/list]

Successfully flashed over A3000_A422_013_25_140624.
Felt like holding a nexus 7!
Thanks a lot man!

Thanks
Thanks Olivier for your enormous efforts, you are working alone , You rock
successfully installed it over A3000_A422_013_025_140926_WW_CALL_FUSE
Using this build "cm-11-20141127-UNOFFICIAL-a3"
I'm testing it , and i'm going to report the bugs i find via the bug report
Again , thanks

This is the best post on XDA so far.
Thank you for your effort @Olivier

Think you Sir...is it support Call function ?
i will try it soon...

Hesham Sleem said:
Think you Sir...is it support Call function ?
i will try it soon...
Click to expand...
Click to collapse
No this rom not support Calling because NULL IMEI
***Backup NVRAM before try it***

nut27455 said:
No this rom not support Calling because NULL IMEI
***Backup NVRAM before try it***
Click to expand...
Click to collapse
Ok...So if i backup NVRAM and restore it after flash rom , Call function will work ??

Hesham Sleem said:
Ok...So if i backup NVRAM and restore it after flash rom , Call function will work ??
Click to expand...
Click to collapse
No. Guys, it's clearly stated in the OP that RIL/radio (and hence calls/SMS) is broken!

New user
I have a question..
If I install this room on my lenovo a3000. What is the things that will not working on my tablet. Sorry I'm not professional and I need to help to know what is the risk's that I will found??

Magiiic said:
I have a question..
If I install this room on my lenovo a3000. What is the things that will not working on my tablet. Sorry I'm not professional and I need to help to know what is the risk's that I will found??
Click to expand...
Click to collapse
As it was said in the first post..
Bluetooth
RIL/radio
Camera
(hw) video en/decoding and hwcomposer
Internal SD card
probably much more (haven't had much time to test everything)

MirXas said:
As it was said in the first post..
Bluetooth
RIL/radio
Camera
(hw) video en/decoding and hwcomposer
Internal SD card
probably much more (haven't had much time to test everything)
Click to expand...
Click to collapse
Any solve to this problem's?

Magiiic said:
Any solve to this problem's?
Click to expand...
Click to collapse
Wait for future builds.
Stop asking questions in this thread, there is a seperate Q&A thread especially for this.

Really great work
Only the camera to go and I'll use this I promise
Sent from my Lenovo IdeaPad A3000-H using XDA mobile app

Aren't u using hodor kernel?
Hodor kernel fir A3000 have not any radio/Bluetooth bug listed!! They why in this rom has bugs of radio?? http://forum.xda-developers.com/lenovo-a3000/orig-development/kernel-hodorkernel-t2952086
Sent from my Lenovo A3000-H
MOD EDIT: Not a great sense posting some other ROM LINK here

afridi.shahriar said:
Aren't u using hodor kernel?
Hodor kernel fir A3000 have not any radio/Bluetooth bug listed!! They why in this rom has bugs of radio?? http://forum.xda-developers.com/lenovo-a3000/orig-development/kernel-hodorkernel-t2952086
STOP spaming the same everywhere ! The RIL bug is not in the kernel, it's in the ROM itself.
Click to expand...
Click to collapse

Members,
It is not so difficult to be sensible and considerate.
1) Kindly stop asking questions here. Use the Q&A.
2) If you find something not to your liking, find something which you like or produce what you like by yourself
THREAD CLEANED.

OP thankyou for this works very well with my F version ,never seen HD video load so fast

afridi.shahriar said:
Aren't u using hodor kernel?
Hodor kernel fir A3000 have not any radio/Bluetooth bug listed!! They why in this rom has bugs of radio?? http://forum.xda-developers.com/lenovo-a3000/orig-development/kernel-hodorkernel-t2952086
Click to expand...
Click to collapse
Yes, the CM11 kernel is based off my HodorKernel. Apparently the kernel isn't the problem here - you could flash it on any fused Stock ROM and everything would work.
To those who wanted ETAs: At the moment, I'm a bit busy with exams and other devices. Bugfixing is progressing rather slowly, not only due to time constraints but also because I'm working on this alone and it's not easy to work on mtk devices.

keep up the good work.
you can make it buddy.

[ROM][OTA][STABLE] CyanogenMod 12.1.1

I'm currently on a hackathon in Munich so I don't have time to maintain this thread. Will be online again on Tuesday. I'm back. Feel free to contribute or discuss things

Reserved for later use.

downloading.....thanks For your work!!!

Thanks.

Hi i could not flash cm with twrp and also not with cwm recovery does anybody get flashed cm successfully?
Edit:
I solved it! everytime i tryed to flash the zip i got the message :this package is for p8000 this is a k05ts_a
FIX:
1.Open the zip using WinRAR or 7ZIP. and decompress the package
2.Open the package and navigate to \META-INF\com\google\android
3.Open updater-script file in a text editor.
4.Change the two "P8000" entries with "k05ts_a"
before:
assert(getprop("ro.product.device") == "P8000" || getprop("ro.build.product") == "bacon" || abort("This package is for "P8000" devices; this is a "" + getprop("ro.product.device") + "".")
after:
assert(getprop("ro.product.device") == "k05ts_a" || getprop("ro.build.product") == "bacon" || abort("This package is for "k05ts_a" devices; this is a "" + getprop("ro.product.device") + "".")
5.Compress the folder back to zip.
6.Flash and enjoy

I am absolutely looking forward to this ROM. Thanks so much!
Will the ROM support device encryption?

alfredxyz said:
Hi i could not flash cm with twrp and also not with cwm recovery does anybody get flashed cm successfully?
Edit:
I solved it! everytime i tryed to flash the zip i got the message :this package is for p8000 this is a k05ts_a
FIX:
1.Open the zip using WinRAR or 7ZIP. and decompress the package
2.Open the package and navigate to \META-INF\com\google\android
3.Open updater-script file in a text editor.
4.Change the two "P8000" entries with "k05ts_a"
before:
assert(getprop("ro.product.device") == "P8000" || getprop("ro.build.product") == "bacon" || abort("This package is for "P8000" devices; this is a "" + getprop("ro.product.device") + "".")
after:
assert(getprop("ro.product.device") == "k05ts_a" || getprop("ro.build.product") == "bacon" || abort("This package is for "k05ts_a" devices; this is a "" + getprop("ro.product.device") + "".")
5.Compress the folder back to zip.
6.Flash and enjoy
Click to expand...
Click to collapse
Now that's becoming super weird! My early builds were for k05ts_a but rejected to be installed because they wanted p8000 as assertion. Looks like a different batch problem again, oh noes!
-Tiz- said:
I am absolutely looking forward to this ROM. Thanks so much!
Will the ROM support device encryption?
Click to expand...
Click to collapse
Well for now I want to bring up all peripherals (current challenge is to fire up the camera) before adding features over stock. Of course Mediatek did a custom flashlight implementation which leads to a SystemUI crash when booting with camera enabled because the flashlight toggle can't find the flashlight pointer. Disabling the back camera works but then we obviously only can use the front cam which is not an option. Looks like I gotta hack kernel drivers...

BlueFlame4 said:
Now that's becoming super weird! My early builds were for k05ts_a but rejected to be installed because they wanted p8000 as assertion. Looks like a different batch problem again, oh noes!
Click to expand...
Click to collapse
i think its more of what rom they are coming from.
maybe a pre-req to be on latest stock before trying this rom?
surely that check is only there to prevent people flashing a rom not meant for their phone/model onto it? it can be removed and re-zipped for flashing without the check.
hats off for the great work @BlueFlame4.
hope elephone see this and actually help you out with the difficulties and provide you with free devices in the future LOL

El_Nino9 said:
hats off for the great work @BlueFlame4.
hope elephone see this and actually help you out with the difficulties and provide you with free devices in the future LOL
Click to expand...
Click to collapse
Thank you!
BTW Camera works now (front, back and flash) but video recording is still broken. I'll look into this later - next quest is RIL bringup

hi blueflame...
been lurking and use visi0nary's kernel since v1.2
subscribing this thread and will be also lurking here for ANY updates
really appreciate all the work you have done and many thanks for your effort and resources to have CM12 in this phone

Will use it as soon as mobile data works. Thanks for ur great work

Tank you!
I've read that for the Elephone Trunk is ou the CM13. Maybe is possible to implement that in the future.

SuperKekko84 said:
Tank you!
I've read that for the Elephone Trunk is ou the CM13. Maybe is possible to implement that in the future.
Click to expand...
Click to collapse
Well, the Trunk uses a Qualcomm chipset which is relatively easy to handle even though it's still hard work to set up the device tree. Speaking of that my device tree is on Github so feel free to experiment with CM 13. I will do one thing after the other and get CM 12.1 running first before starting something new.
BTW thank you guys again for the donations! <3

PLSHELPIMANOOB said:
Will use it as soon as mobile data works. Thanks for ur great work
Click to expand...
Click to collapse
Turns out this might be more work than expected but I'm making progress. The MUX daemon that coordinates the modems already fires up and initializes everything but somehow I still can't speak to it yet (i.e. Baseband is still unknown). Looks like a permission problem.
Fixed so far:
* Bluetooth
* Camera
* Long booting time is fixed
* Proximity Sensor
Unfortunately I had to make a change in the CM tree in order to get camera working so there's maybe a better way to do this. I'll look into this later though as it works for now. Gonna hit the sauna now with some friends and afterwards I don't have time until sunday so don't expect a release this week. Once RIL works, I'll push the build

BlueFlame4 said:
Gonna hit the sauna now with some friends and afterwards I don't have time until sunday so don't expect a release this week. Once RIL works, I'll push the build
Click to expand...
Click to collapse
Okay, wish u much fun Yeah no hurry , take ur time =) Until u get it to work I use the Nexus ROM with XPOSED But I´m already very excited for CM, mainly cuz of the theme Engine

BlueFlame4 said:
Turns out this might be more work than expected but I'm making progress. The MUX daemon that coordinates the modems already fires up and initializes everything but somehow I still can't speak to it yet (i.e. Baseband is still unknown). Looks like a permission problem.
Fixed so far:
* Bluetooth
* Camera
* Long booting time is fixed
Unfortunately I had to make a change in the CM tree in order to get camera working so there's maybe a better way to do this. I'll look into this later though as it works for now. Gonna hit the sauna now with some friends and afterwards I don't have time until sunday so don't expect a release this week. Once RIL works, I'll push the build
Click to expand...
Click to collapse
Hello. Good job!
I'm working under cm12.1 to.. I don't have never long boot. First boot 2-3 min (2 on optimisation) very fast, small review of cm12.1 on p6000 pro. Will be better, if we cooperated with you.
http://www.youtube.com/watch?v=M_oN5QkfkXw

Deepflex said:
Hello. Good job!
I'm working under cm12.1 to.. I don't have never long boot. First boot 2-3 min (2 on optimisation) very fast, small review of cm12.1 on p6000 pro. Will be better, if we cooperated with you.
http://www.youtube.com/watch?v=M_oN5QkfkXw
Click to expand...
Click to collapse
Yeah, I forgot to a add a binary which basically lead to the long boot problem. Lessons learned, won't happen again What is working on your build? Cooperation is always appreciated!

BlueFlame4 said:
Yeah, I forgot to a add a binary which basically lead to the long boot problem. Lessons learned, won't happen again What is working on your build? Cooperation is always appreciated!
Click to expand...
Click to collapse
Day ago i'm booted
Working:
led, vibrator, accelerometer, autorotation, wifi (fixed)
Now i'm going take logcats and modify a device tree My skype : rblmix1, if i fix something, i told you

Excited to see CM for the elephone!
Thank you guys so much for doing this!

[ROM] [8.1.x] LineageOS 15.1 Official (All variants) [NO VoLTE]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS 15.1 is a free, community built, aftermarket firmware distribution of Android 8.1. (Oreo), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Requirements
* You must read this post completely
* You must have flashed a stock MM update to update the firmware to a version that is compatible with these builds. Search XDA for the best way to do so for your device (if you already did that prior to installing any Nougat ROM, you are fine!).
* You must use the search first and make sure your question has not been answered yet!
* Do NOT ask for the availability of features or if any specific app works - we implement / announce new features when we want to
* Use the latest TWRP available, otherwise expect issues
* If you have a problem, do not ask if someone else has it. Post with logs or don't post at all!
Code:
[COLOR=RED][B]Important note:[/B][/COLOR]
Stock Firmware B360 and B370 are known to cause bootloops!
(Generally: if your stock ROM supports VoLTE it is likely that it is also affected!)
All others might work, please do not ask in here how to up- or downgrade!
Known Issues / NOT working / "Bugs"
* Search the thread!
* Anything running VoLTE firmware
* You tell me! (See "Other Issues")
Everything else WORKS, do NOT ask if anything (feature, function, ...) specific is working or not (Search the thread if you want to make sure and if you don't find it: test it yourself)
Other Issues?
Before posting on this thread, make sure of a few things:
You've utilized the search function of the forums. Nothing irritates us more than lazy people who do not search for an answer before asking or ask the same question over and over again.
If you are the only one having a problem: boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
LOGS LOGS LOGS!!!!
Press BOTH volume keys + power key - it will vibrate very short. Wait until a notification appears that the bugreport is ready, send it to your mail and post it.
Alternatively go to dev options (press "build number" in "About phone" 7 times to activate it), activate the switch "Shortcut for bugreport", then go to Settings->Keys->Power key and activate it there as well. Long press power-key and then use the new menu item.
Only if rooted:
Use this: SysLog by Tortel
If you have a hard reboot (to the vendor boot logo, not the LineageOS boot logo), use adb or any other file explorer tool to pull a copy of "console-ramoops" after the reboot and provide that.
Code:
adb pull /sys/fs/pstore/console-ramoops
Note: We will not support any kind of modification on the ROM not done by our sources. If you are running XPosed, Kernel Booster or whatever occurs to you, we won't support you in any way. The problem will in every case be treated as the additional softwares' fault (because often it is!)
Changelog
* Gerrit (All)
* Device tree
* Kernel
Download Links
ROM: https://download.lineageos.org/kiwi
Again: if you need Google-Apps, install them after flashing the ROM and BEFORE the first reboot!
Google apps addon:
(Note: Not required to run the ROM)
We are using Open GApps (Link) Arm64 version, others might also be working (make sure to use ARM 64bit when using other providers!)
Note: In case you want to use any gapps, YOU MUST install the right gapps the first time that you flash a marshmallow ROM. Do not boot with an older gapps or without one and then try to install it later.
Note: If you install a package which replaces the default dialer (mostly "Stock Gapps") you have to go to Settings->Apps->Gear-Icon and set the new dialer as a default telephony app to prevent force closing of apps
Root addon:
Official download site - our device is ARM64
Don't use SuperSU or other tools, otherwise expect bootloops!
Important note
This is a development thread. This means it is NOT your personal support thread.
Questions about anything not related to LineageOS on kiwi (Honor 5X) will not be accepted nor be answered.
This includes topics like going back to stock, problems with third-party apps (e.g. Snapchat), ...
Also do not encourage people with such questions by answering them but report them to keep the thread clean!
Supported variants
Honor 5X
USA: KIW-L24
Russia: KIW-L23
India: KIW-L22
Europe: KIW-L21
China: KIW-AL10, KIW-AL20, KIW-CL00, KIW-UL00, KIW-TL00 (might have some firmware problems), KIW-TL00H
Honor GR5
Canada: KII-L05
Japan: KII-L22, KII-L21
Your's missing? Contact us!
XDA:DevDB Information
LineageOS 15.1, ROM for the Honor 5X
Contributors
BadDaemon, Dobroslaw Kijowski
Source Code: https://review.lineageos.org/#/q/(project:LineageOS/android_device_huawei_kiwi+OR+project:LineageOS/android_kernel_huawei_kiwi)+AND+(statuspen+OR+status:merged)+AND+branch:lineage-15.1
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.1.x
Based On: LineageOS
Version Information
Status: Nightly
Created 2018-09-22
Last Updated 2019-06-26

Reserved
FAQ
Q: Why the **** did it take so long?
A: Besides the fact that I don't really need to answer about my working speed:
I have actively been working on bringing up 8.x for this device since February. Some might have seen some development going on with the kernel on 14.1, but effectively this was all in preparation for 15.1: The kernel being used in this version of the ROM is completely redone:
We threw away what we had and started fresh with a plain qcom kernel. Then we re-added what we needed, effectively ending in around 700k lines less of custom additions by the OEM.
Q: Why didn't you share it before, so others could work on it as well?
A: Because last time we did that, someone else came along, compiled our work and shared it himself. (Not to start about all the other copy&paste-ROMs who could have done the work as well but usually just wait for us to do it)
Q: Anything else to add?
A: Yes: read the first post before replying or testing the ROM!

Reserved
Install instructions:
* Follow the instructions on https://wiki.lineageos.org/devices/kiwi/install

Reserved

Reserved 2

this was suprising will test it and see if it works

it fails flashing with error 7
E3004 : this package is for device KIWI; this device is .

omid_shirzad said:
it fails flashing with error 7
E3004 : this package is for device KIWI; this device is .
Click to expand...
Click to collapse
Please tell me you have updated your twrp before trying?

BadDaemon said:
Please tell me you have updated your twrp before trying?
Click to expand...
Click to collapse
nope
its 3.1.1.0

So far, no issues to report on KIW-24. Awesome job!

omid_shirzad said:
nope
its 3.1.1.0
Click to expand...
Click to collapse
Bro ... update it and try .... please read Frist post

Bharath kumar 007 said:
Bro ... update it and try .... please read Frist post
Click to expand...
Click to collapse
THANKSSSSSS
updated it and i'm flashing rom again<i think it workd:good::good::good:

finnaly oreo is coming for honor 5, cant wait to test it, thanks dev

So glad people follow the instructions:
"Read the first post!"
"* Use the latest TWRP available, otherwise expect issues"
...

BadDaemon said:
Install instructions:
* Follow the instructions on https://wiki.lineageos.org/devices/kiwi/install, just use the ZIP linked in the first post instead of one from the official page
Click to expand...
Click to collapse
Thanks. Buddy. I always knew you are working and you will post it. Community thankful to you.

omid_shirzad said:
it fails flashing with error 7
E3004 : this package is for device KIWI; this device is .
Click to expand...
Click to collapse
you can try this method

Guys, this problem is already solved. dont post such stuff please, especially when its a user error...

Thanks to devs to make it possible.... I am coming from LoS 14.1 did a full wipe but rom does not boot (showed LoS logo but reboot to recovery) after that I flashe Rom + Gapps + BaPatch.zip but phone stucks on Huawei logo. I don´t know how to downgrade Emui because I have the chinese variant UL-00

Bootloop
Hello first of all thanks to the devs who made it possible for our device i really appreciate their hard work so im coming from los 14.1 using it as my daily driver for almost 4 months had no issues with it so far with it but today when i flashed this rom [clean installed] it show the lineage boot logo but after a min device reboots back to recovery i have tried again a several but no luck so far hopefully the devs can understand whats the issue thank you? btw I'm on latest twrp also and my device name kiw-l21 and also I'm not on volte firmware

blackscreen
hope i take the logs right
lockscreen goes black after restart
View attachment 2018-09-23_09.54-lockscreen.zip

[ROM][10.0][ LOS 17.1 - MediaPad M3 Lite 8/10 ][ Update 2023-02-26 ]

Hello !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The new Android 10 is coming to your Huawei MediaPad M3 Lite 8/10, Qualcomm Snapdragon MSM8940 with the new LineageOS 17.1 !
Please note that this ROM is one of my side projects, for which I could provide zero warranty. By installing this ROM, you acknowledge that you take all the risks that come with installing custom firmwares on your devices, including but not limited to bricking your device, losing your data, etc.
Warning !
Installing a custom ROM on your device can sometimes be difficult and also with unwanted consequences! Therefore, make sure that you understand exactly what risks this operation entails - you are the only one responsible for all actions taken on your device.
Devices Supported:
Huawei MediaPad M3 Lite 10 :
BAH-AL00/BAH-L01/BAH-L09/BAH-W09
Huawei MediaPad M3 Lite 8 :
CPN-AL00/CPN-L0J/CPN-L09/CPN-W09
About LineageOS :
LineageOS 17.1 is a free, community built, aftermarket firmware distribution of Android 10 (Q), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Downloads :
LineageOS-17.1-HuaweiMediaPadM3Lite_2023-02-26.zip md5 : b86f752b8851bf8a8e1ce9e2168ee92d
This ROM do not include GApps
please use always the last available pack :
OpenGApps for Android 10 ARM64
Instructions :
0. LOS 17.1 must be installed via TWRP 3.3.1-0
1. After device boot on LOS 17.1 you must to install the New TWRP 3.3.1-3
( TWRP 3.3.1-3 needed for flash GApps on LOS 17.1 )
2. plug USB cable to your Desktop/Laptop for copy files ( or add them to a external storage/microSD card )
3. go to Wipe -> Swipe to Factory Reset
4. copy LOS-17.1 ROM & GApps to Internal/External Storage
5. go to Install -> check the LOS zip file
6. Add more Zips
7. check GApps zip file
8. Swipe to confirm Flash
9. Wipe cache/dalvik -> Swipe to Wipe
10. Reboot System
11. Enjoy!
What's working :
* Touchscreen
* Audio & Video
* WIFI
* BT
* GPS
* FPS
* Lights
* Sensors
* Internal/External Storage
* ADB/MTP & USB/OTG
* RIL & data connection
* Camera Video recording
* Flip Cover
* Encrypt device
* SELinux Enforced
Not working :
* Photo Camera
* there could be also others minor issues !
Credits :
LineageOS Team
dianlujitao
LuK1337
Greg Kroah-Hartman for keep alive 3.18.y kernel !
Source Code :
device tree : android_device_huawei_bach Branch: ten!
kernel: android_kernel_huawei_bach Branch: ten !
Screenshots :

Contributors
surdu_petru
Paypal Donation : paypal.me/petrusurdu1
Source Code: https://github.com/Huawei-Dev?tab=repositories
ROM OS Version: Android 10 / Q
ROM Kernel: Linux 3.18.140
ROM Firmware Required: LineageOS 16.0 Android Pie
Based On: LineageOS
Version Information
Status: Stable
Created 2019-10-20
Last Updated 2023-02-26

Donors :
@ossizwei
@Jobode747
@Micromind
@morgan7676
@Kagum
@mrdark5555
@realdomdom
@xbor
@#marcg#
Norbert Ossendorf
Once again thank you very much to all donors !!!

Now that I've managed to unlock my M3 Lite I've decided to jump in with both feet
I've put this LineageOS 17.0 on with CyanogenMod OpenGAPPS 10 full. I'll let you know how I get on.
Do I need to update TWRP from 3.2.0.0 to 3.3.1.0?
thanks
Paul
---------- Post added at 03:28 PM ---------- Previous post was at 03:26 PM ----------
Got getting messages repeatedly between these two:
"com.qualcomm.qcrilmsg.... keeps stopping"
"android setup keeps stopping"

csjjpm said:
Now that I've managed to unlock my M3 Lite I've decided to jump in with both feet
I've put this LineageOS 17.0 on with CyanogenMod OpenGAPPS 10 full. I'll let you know how I get on.
Do I need to update TWRP from 3.2.0.0 to 3.3.1.0?
thanks
Paul
---------- Post added at 03:28 PM ---------- Previous post was at 03:26 PM ----------
Got getting messages repeatedly between these two:
"com.qualcomm.qcrilmsg.... keeps stopping"
"android setup keeps stopping"
Click to expand...
Click to collapse
Yes you can update now Twrp to 3.3.1.
Btw I didn't tested GAppps. So if it's not working just remove it.

This is happening a lot when I go into Setting: "android setup keeps stopping"

csjjpm said:
This is happening a lot when I go into Setting: "android setup keeps stopping"
Click to expand...
Click to collapse
Ok, just remove GApps and see how it's working ... later you can install nano or pico, not full version of GApps !
EDIT :
Full version of GApps it's not recommended at all as there is just a Betta LOS 17.0 !

Awesome!, thanks for providing full source.
I'm getting the same error "com.qualcomm.qcrilmsgtunnel" keeps crashing until I manually close the app on clean install, I have a tablet with no sim. Other than that the tablet seems to be working fine.
After installing opengapps android setup crashes repeatedly, but after disabling android setup, play store works as normal.

oddhap said:
Awesome!, thanks for providing full source.
I'm getting the same error "com.qualcomm.qcrilmsgtunnel" keeps crashing until I manually close the app on clean install, I have a tablet with no sim. Other than that the tablet seems to be working fine.
After installing opengapps android setup crashes repeatedly, but after disabling android setup, play store works as normal.
Click to expand...
Click to collapse
Well done !

oddhap said:
Awesome!, thanks for providing full source.
I'm getting the same error "com.qualcomm.qcrilmsgtunnel" keeps crashing until I manually close the app on clean install, I have a tablet with no sim. Other than that the tablet seems to be working fine.
After installing opengapps android setup crashes repeatedly, but after disabling android setup, play store works as normal.
Click to expand...
Click to collapse
Thanks, I didn't know if the 'android setup' was important or not. Have disabled it and all quiet now.
I tried a few version of GAPPS10, Pico, Nano etc. and still got the errors. Once 'android setup' disabled now issues.
Thanks

Installed without GApps. Seems fine so far. Will test more once it completes charging. Thanks for all your hard work man. you have really enhanced the overall experience with this tablet.

fallensoldier said:
Installed without GApps. Seems fine so far. Will test more once it completes charging. Thanks for all your hard work man. you have really enhanced the overall experience with this tablet.
Click to expand...
Click to collapse
Thank you for feedback!

Hi I try to test this rom, very nice!! But it still has many bugs, but I'm sure it will improve over time! Report that it is present some bugs, when start cpuz app the device restarts suddenly, Chrome some times stop to work , the microphone does not work in any app (eg. google assistant "hey google") work with earphones. When you record a fingerprint and then reboot the device you lose the fingerprint setting.
Thank you so much for the chance to try an updated version of andorid on this tablet!!
I hope to be helpful, a great job has been done.
I will try this rom for a short time but will return to the stock version, it won't be easy to go in stock, because there is no custom rom based on the original firmware.
I will find a way to return to the stock.
Bye bye.

sergybizzi said:
Hi I try to test this rom, very nice!! But it still has many bugs, but I'm sure it will improve over time! Report that it is present some bugs, when start cpuz app the device restarts suddenly, Chrome some times stop to work , the microphone does not work in any app (eg. google assistant "hey google") work with earphones. When you record a fingerprint and then reboot the device you lose the fingerprint setting.
Thank you so much for the chance to try an updated version of andorid on this tablet!!
I hope to be helpful, a great job has been done.
I will try this rom for a short time but will return to the stock version, it won't be easy to go in stock, because there is no custom rom based on the original firmware.
I will find a way to return to the stock.
Bye bye.
Click to expand...
Click to collapse
Thanks for feedback ! Btw, I already noticed fingerprint issues .... but as you already said the ROM will be improved with each update !
At this time even Lineage OS didn't released the stable source yet .

@surdu petru Do you have the possibility to make a custom rom based on the latest stock rom to flash via twrp? It would be a great thing.
Thank you for your work!

sergybizzi said:
@surdu petru Do you have the possibility to make a custom rom based on the latest stock rom to flash via twrp? It would be a great thing.
Thank you for your work!
Click to expand...
Click to collapse
Sorry, no way ... I tried a few time to revert to stock but my device can't boot on stock recovery from some unknown reasons .
But there is a few users wich already reverted this device to stock after installed Lineage OS 16.0 ( Android Pie ), so you could search on Lineage16.0 thread for their posts, or you can get in touch with them through PM.
Good luck !

Ok no problem.. I'll find a way to get back to the stock .. But first I'll try the other roms with Android 9. Thank you

hello guys,
any chance to see an update for the LTE version?
thanks
mrbarnie

mrbarnie said:
hello guys,
any chance to see an update for the LTE version?
thanks
mrbarnie
Click to expand...
Click to collapse
My tablet is also LTE version . What it's not working now ? Anyway many stuff will be improved in the next updates .

great thanks a lot i thought that this update is only for the lite version, which means WIFI only.
i have BTV-DL09
Build BTV-DL09C100B311
EMUI 5.0.4

mrbarnie said:
great thanks a lot i thought that this update is only for the lite version, which means WIFI only.
Click to expand...
Click to collapse
NO, LITE version doesn't mean WIFI only !

CherishOS V4.8 [13] [Gapps/Vanilla] [NB1] [Unofficial]

Hello forum, hello developers,
I am very happy that the Nokia 8 still finds support here.
For the work done and providing this great ROM my heartfelt thanks! Everything works wonderful. In my opinion even better than the Anfroid 12 version.
Perfect. I am very happy with it.
Because of this great work, hopefully my Nokia will work well for a while,

Kasi1906 said:
Hello forum, hello developers,
I am very happy that the Nokia 8 still finds support here.
For the work done and providing this great ROM my heartfelt thanks! Everything works wonderful. In my opinion even better than the Anfroid 12 version.
Perfect. I am very happy with it.
Because of this great work, hopefully my Nokia will work well for a while,
Click to expand...
Click to collapse
hey, thank you i am glad you are happy with it, always nice to see things like this, appreciated.

4.2 build is up, happy flashing, changelog in git page

marceldossantos91 said:
4.2 build is up, happy flashing, changelog in git page
Click to expand...
Click to collapse
Thank you for the timely security update! My gratitude is still very high. The ROM works perfectly. So far I have not had any problems.

I have an unlocked bootloader
I don't have twrp
I wish it will be updated
where to begin?
sew up twrp? which version?
infect with a virus through nost?
instructions are not clear

satanvade said:
I have an unlocked bootloader
I don't have twrp
I wish it will be updated
where to begin?
sew up twrp? which version?
infect with a virus through nost?
instructions are not clear
Click to expand...
Click to collapse
Hi, you can follow the guide in the Q & A section linked above or in our telegram support group, but the basic idea is:
Unlock bootloader + critical
Flash Tvirus 2.0, which includes twrp 3.6 already (there is however a 3.7 update available, which supports decryption in A12/13, but 3.6 can flash fine)
Flash the rom
Wipe data
Reboot to system
If you need further support, we are more responsive in our support group

It is a beautifully crafted system. Some issues make it a deal breaker for me though.
1. Pop up about something is wrong contact manufactruer every time you boot up.
2. Android auto will not launch. Car detects phone and phone detects car but nothing will launch.
3. No face unlock

guorium said:
It is a beautifully crafted system. Some issues make it a deal breaker for me though.
1. Pop up about something is wrong contact manufactruer every time you boot up.
2. Android auto will not launch. Car detects phone and phone detects car but nothing will launch.
3. No face unlock
Click to expand...
Click to collapse
Hey.
1. don't worry about this error, it does no harm in any way, we hid it before but sources have patched against our patch, we're trying to find a new way to hide it.
2. are you using Gapps or vanilla version? I will look into this
3. Face unlock is a feature that usually gets added on at some point, it's starting to get added in some A13 roms now, please be patient it will get added

marceldossantos91 said:
Hey.
1. don't worry about this error, it does no harm in any way, we hid it before but sources have patched against our patch, we're trying to find a new way to hide it.
2. are you using Gapps or vanilla version? I will look into this
3. Face unlock is a feature that usually gets added on at some point, it's starting to get added in some A13 roms now, please be patient it will get added
Click to expand...
Click to collapse
I flashed vanilla first then flashed Gapps in one go. Rebooted to CherishOS afterward. Updated android auto app through google play store. I also had this issue with Pexiel Experience A12. It can be hard to test as a car stereo is needed. Thanks!

guorium said:
I flashed vanilla first then flashed Gapps in one go. Rebooted to CherishOS afterward. Updated android auto app through google play store. I also had this issue with Pexiel Experience A12. It can be hard to test as a car stereo is needed. Thanks!
Click to expand...
Click to collapse
Would there be any chance you can post a log? So i can look into it, as i dont have an android auto compatible car to test with, would be most helpful if you could.
Feel free to join our support group & talk to me

marceldossantos91 said:
Would there be any chance you can post a log? So i can look into it, as i dont have an android auto compatible car to test with, would be most helpful if you could.
Feel free to join our support group & talk to me
Click to expand...
Click to collapse
Sadly I don't have a forest around me. Hard to find a log. Jks. I will find log later.

guorium said:
Sadly I don't have a forest around me. Hard to find a log. Jks. I will find log later.
Click to expand...
Click to collapse
thanks

marceldossantos91 said:
thanks
Click to expand...
Click to collapse
Thanks for looking into this. Nokia 8 somehow spams the crap out of the log. Got the log with logcat[NO ROOT] app on wireless debugging mode. The file is very long but I believe the useful bit is at 12-16 01:10:31.019. I roughly plugged it into the car stereo at 12-16 01:10:30. Guess it takes a while for system to detect it.

guorium said:
Thanks for looking into this. Nokia 8 somehow spams the crap out of the log. Got the log with logcat[NO ROOT] app on wireless debugging mode. The file is very long but I believe the useful bit is at 12-16 01:10:31.019. I roughly plugged it into the car stereo at 12-16 01:10:30. Guess it takes a while for system to detect it.
Click to expand...
Click to collapse
thank you for the log i will look into it and see if i can resolve it in updated builds

marceldossantos91 said:
thank you for the log i will look into it and see if i can resolve it in updated builds
Click to expand...
Click to collapse
No problema. PE A12 has the same problema. Must be easy to miss.

4.4 build is up, happy flashing

marceldossantos91 said:
4.4 build is up, happy flashing
Click to expand...
Click to collapse
Thank you!
Enjoy

Kasi1906 said:
Thank you!
Enjoy
Click to expand...
Click to collapse
tysm appreciate it

4.6 build is up, happy flashing!

Develop Bugs

welcome