High everybody
Is there any replacement to Huawei stock roms automatic power on/off features for custom roms because all apps I found only automatic power off only and no app have power on ?
Come on guys no one have any answer to that question?
I think that is very difficult because must have a specific hardware such as microprocessor... if it were so easy to do, you would apply in all smartphones.. I think blackberry had that function and some old motorolas...
This phone have this function on original stock rom but not exist in custom roms or any application.
Related
After some water exposal, bottom hardware buttons (along with optical trackball) refused to work.
I have fixed them with some precise inside cleaning, but the optical function (not the button himself) continues malfunctioning, which is not a big deal for me, but..
The exact problem: i spotted in dark environment, that the sensor inside continuously glimmers in all modes - scren-off, scren-on (without puting finger over him), etc.. In return, my battery drains extra aprox. 10-12 mA!
I have observed, that in healthy device, sessor glimms only when interacting with him..
Is there a chance to disable this sensor to avoid this? I hope in software manner
I don't think there is anything out there that will disable the optical pad. You could give HTC a call or your carrier and see what they say.
There is this thread on the forums about turning off the backlights.
Should work for trackball as well? Probably. Something about LED Hack on the first or second page. Seems to be something on the 3rd page as well.
Go have a read over here (I just skimmed. its 2am lol) http://forum.xda-developers.com/showthread.php?t=704977
@formformer
If you tell me your kernel version I will try to build a kernel without trackpad support!?
@Meaple 's post was sadly adequate and rips best hope in me ;( ..
@eden2812 I have using 2 led hacks from previous attempts to minimize energy consumption & eye comfort, and they shurely don't do the "trackpad sensor shutting" job..
@AndroidJaspie
it's so damn cool to offer this kind of experience. salute!
i have likely using latest Ginger Villain's compilation, but any recent rom-kernel set, with weak appetite fits my best.
i will be very patient to hear from you..
my current setup is:
OK I built a new kernel from the cyanogenmod sources now without trackball support. I tested it with GingerVillain 1.4 and it worked.
please make a backup and then give the update.zip a try.
Tell me if the new kernel solved your problem or not.
Jasper
Yes Jasper, obviously the sensor is shutted (no glimmering observes) and the xtra drain is all gone now!! I'm so pleased.
But i have found, that the bottom buttons (including the button under the optical trackpad) not waking the phone any more. Is this issue related?
And another, not so important question: Would be this kernel compliant with other Gingerbread releases? or.. could you give me some hint, if is possible to transform your "surgery" into a some kind of a patch, that will give me opportunity to enjoy any feature kernel/roms?
Again, BIG 10x for your respond in this custom problem so far! You make my life happier
karel
No problem i like it to work with things like that. So it's a good chance to improve my knowledge about linux and help other people at the same time.
Are you talking about the all buttons or only about the button around the optical sensor?
If you are talking about the one around the sensor then it's normal that it won't wake up the phone any more. But the others(home, menu, back and search) should work like before.
This kernel works only with cyanogenmod and GingerVillain. On other rom's like Oxygen it doesn't work. But you i can compile you the kernel you want.
At the moment it's only possible to disable the trackball only by editing the kernel configuration. But i will try to get it working without changing the kernel so that you can use every kernel you want.
Jasper
i told so, about the relation of shutted sensor and not working buton.., but yes, others buttons also not working in lockscreen-off mode, where they should or at least worked before. (volume butts still works for wakening..)
ps. a have barely no linux skills, but its interesting for me either!
and if editing & compiling is not so high level task, im going to try first steps right now!
Any way, disabling track sensor without editing kernel settings sounds like a dream..
k
hi, my fried
could you tell me, where in the config I can find the exact setting and how to change it?
hi
if you got the kernel source you can make menuconfig to configure the new kernel. To disable the trackball go to "Device Drivers" --> "Input device support" --> "Opticaljoystick". To disable the joystick press "n" to enable it press "y"
Don't know how to comile your own kernel?
here is a useful links that helped me, too:
-[HOW-TO] Build your own kernel package from source
huh.. 10x 4 the guides, they light me enough to get started week ago, but i get stuck just in the beginning (problems with MBR or something..). and at this moment i have absolute lack of time to deal with this interesting stuff. However.. can i have one more last ask from you: to compile for me an updated kernel.. (they says he has the ability to record 2way call conversations..)
Using the Ginger Villain rom, suppose with this richardtrip kernel. Guess CM will worx too..
Thanks anyway!
ok
a bit late but here it is
a new kernel version 2.6.37.2 from the richardtrip-sources.
kernel features:
-disabled trackball
I don't know anything about "Two-way call recording kernel support" but i will try to find out as much as posible to configure a kernel with it.
jasper
Hi AndroidJaspie, i've the same problem with the optical trackball of my desire. I use the miui rom with the kernel 2.6.37.6-cyanogenmod-g8913be8. Can i use the kernel in your last post? thx bye
Please use the Q&A Forum for questions Thanks
Moving to Q&A
I'm an X ios user, pun intended In a Jailbroken ios environment all 3rd party/unsigned app development is housed under an app called Cydia. Within Cydia you can add developer repositories that host their apps,tweaks etc... Cydia takes all your repositories and creates a directory where you can search or browse by category. Essentially, all tweaks/apps are available for all phones; you just need cydia.
After fiddling around with custom roms like Android Revolution HD and ViperX, I'm starting to see access to tweaks universally is not a reality in the droid world. Though I'm hoping that I'm completely wrong and somebody can show me the light.
Am I able to install the following features on ARHD? or are they solely available in ViperX? are there other tweaks or apps that offer these features?
-Remapping capacitive keys for short hold
The recent HTC update enables this for the menu key, however viper enables all 3 keys.
-Quick Setting, and the ability to move and remove quick settings items.
-Disabling the HTC script that buggers the wi-fi and network between 12am-7am
-Quad Core Cpu usage info Notifications
-Quick theming abilities
Any help is much appreciated!
It's all tweaks, especially the WiFi-killing one that was first developed by J4n87, which also makes the ViperX ROMS. It's also available as a separate app in the Themes and App forums
For Home and Back, maybe why many ROMS don't offer fully costomizable remapping is cos many are satisfied with what those buttons already do, while the ViperX team just gives you everything to mess with, and you gotta help yourself if you mess it up.
ArmedandDangerous said:
It's all tweaks, especially the WiFi-killing one that was first developed by J4n87, which also makes the ViperX ROMS. It's also available as a separate app in the Themes and App forums
For Home and Back, maybe why many ROMS don't offer fully costomizable remapping is cos many are satisfied with what those buttons already do, while the ViperX team just gives you everything to mess with, and you gotta help yourself if you mess it up.
Click to expand...
Click to collapse
Are there ways to achieve this tweaks without a custom rom?
mattswart said:
Are there ways to achieve this tweaks without a custom rom?
Click to expand...
Click to collapse
If by 'without a custom rom' you mean you want these tweaks on the Stock rom then as per my knowledge the answer is No. I might be wrong. But
I had suggest flash the new version of Viper i.e. 2.0.1 . In my opinion it is as stable as the stock ROM and definitely much better with all the tweaks you get. It looks just like the stock rom with no visible changes. Has just an addition 'Viper tweaks' section in the settings where the extra tweaks are available. It never crashes or gets stuck, is much more smooth than the stock rom and the battery life is also much better.
Let me know if I helped by clicking thanks
mattswart said:
Are there ways to achieve this tweaks without a custom rom?
Click to expand...
Click to collapse
If by 'without a custom rom' you mean you want these tweaks on the Stock rom then as per my knowledge the answer is No. I might be wrong. But
I had suggest flash the new version of Viper i.e. 2.0.1 . In my opinion it is as stable as the stock ROM and definitely much better with all the tweaks you get. It looks just like the stock rom with no visible changes. Has just an addition 'Viper tweaks' section in the settings where the extra tweaks are available. It never crashes or gets stuck, is much more smooth than the stock rom and the battery life is also much better.
Let me know if I helped by clicking thanks
Is the function of slide2unlock possible on our device? (slide2unlock is when the screen is off and you slide your finger on the capacitive buttons to wake it up)
I know its a One X function but my brother managed to put it on his Sensation (with custom ROM).
Do we just need a dev to create it or its not possible at all?
also known as Sweep2Wake
http://www.youtube.com/watch?v=SgQ22IuCcKw
That is an awesome function.I have seen a video。 It was run in HTC Sensation（ sense 3.6.）。This function need to modify kernel,but there are some issue in current kernel。（ the headphone button）I think developers will fix kernel issue first,and then they will add this function to their kernels or roms
I’m wondering if there is a tool or a mod that I can use to change how the notification LED lights up, specifically to increase the blink rate or increase the switched on time of a blink cycle. The tiny LED buried inside the ear piece grill and the way it blinks makes noticing missed alerts almost impossible unless you look at it very carefully. Ideally I would like for it to blink rapidly or the have the LED lit up for a little longer in each blink cycle, I know this can affect the battery, so it would be nice if the behavior can be customized further i.e Have intensive blinking for the first 30 minutes and then fall back to the regular conservative mode to save battery.
A better alternative would be to use the capacitive buttons (back, home, menu) without turning the screen on. My previous Galaxy S1 had a mod which could do that, wondering if there is something similar for One X. If those buttons can be selectively turned on then I guess that would be more prominent than that tiny green LED.
Flash CM10.1 or ICJ to get button light notification.
Sent from my One X using xda premium
Latest XM kernels also include BLN (backlight notification). It's fully cofigurable, including the light level. :good:
Plus, it has all the governor tweaks you can think of.
I Don't know if there's a standalone tool for this
but I use CM 10.1 ROM that comes with this tool included
anyway the control is limited to 2 colors (red and green) and 2 speeds , or you can use it to disable the whole light
and still be able to use hardware keys backlight as a notification light
Thanks for the replies. :good:
Currently I’m on Viper X custom ROM. Last year I installed CM10 but wasn't impressed with battery life or camera performance.
[email protected]|-|oR said:
Latest XM kernels also include BLN (backlight notification). It's fully cofigurable, including the light level. :good:
Plus, it has all the governor tweaks you can think of.
Click to expand...
Click to collapse
Interesting, perhaps I'll try that, seems XM supports Sense ROMs and I found few posts where people have managed to get it working with Viper X. I'm guessing if I managed to get XM kernel working, all I have to do is use BLN app from market ?
Maher88 said:
I Don't know if there's a standalone tool for this
Click to expand...
Click to collapse
i think there is a tool for this: light flow app.
i haven't tried it on my hox yet, but i had limited success with it on my desire. htcs are notorious for terrible led notification control and configuration, i think. on my huawei ideos i had it configured exactly how i wanted it, but this is probably impossible on an htc ... actually i found this thread when searching for a solution how to manage my own led problems. but according to the discussion here there is no solution .
PhoenixFx said:
Thanks for the replies. :good:
Currently I’m on Viper X custom ROM. Last year I installed CM10 but wasn't impressed with battery life or camera performance.
Interesting, perhaps I'll try that, seems XM supports Sense ROMs and I found few posts where people have managed to get it working with Viper X. I'm guessing if I managed to get XM kernel working, all I have to do is use BLN app from market ?
Click to expand...
Click to collapse
viper x works well with xm kernel without a repack, and bln works without any app, just enable it as instructed by xm
Sorry for me being a "forever newbe",
my question is: will someone ever develop the "scheduled power on" feature on Lineage for Xiaomi MIDO? (I'm interest for this feature inbuild into the Alarm Clock)
I know it needs some part of kernel remaining on even if the smartphone is off (of course), but this feature is useful when phone is in charge so it doesn't matter. I know also that some other Lineage release for other Xiaomi Phone models have it!
If not (it seems no developer is interested in it) does it exist some custom rom which can do it? I really don't want to return to MIUI (it's too "toy like", and the last release caused me a lack of performances even after an hardware reset), but I would like to use the poweroff alarm! Why it is such a problem to have it?!
Thanks!!
How about a workaround? You can define a duration for do not disturb. Should make no difference, if you are charging anyway.