Related
As long as your device is unlocked in some way (Developer/Chevron/Other) you can get internet sharing on your Samsung phone.
IMPORTANT: If you updated to 8107 via Zune you may have also updated your phones firmware. If this is the case you will not be able to use this hack. I would suggest rolling back to 7720/7740 and updating via CAB Sender using the cabs in Heathcliff74's thread.
1.) First install the WP Dev Tools and unlock your Samsung phone.
2.) Use Microsoft's Application Deployment Tool to send THIS (Update 8107 use THIS) to your phone. Don't run it, delete after it has been deployed.
3.) Install the Diagnosis app by typing ##634# on the phone keypad.
4.) After the Diagnosis app starts type *#9908# and select 'System Tweaks' press 'Save' then 'Close' and RESTART your phone.
5.) Your phone now has internet sharing and as a bonus is interop unlocked!
6.) (optional) Press the 'thanks' button at the bottom of this post if it worked for you.
PS: You need to have a recent mango firmware on your phone or your diagnosis app and drivers will not be new enough to work.
EDIT: I built the file depoyer using the tools provided by Heathcliff74 so many thanks to him! Also, ADC is built in to this as well so no need to worry about that. I also upped the max number of connections from 3 to 5 devices.
NOTE: If you have internet sharing turned on (active hotspot) you will not be able to deploy XAP's untill it is turned off. Also, as with any xap, you need to have your screen unlocked to deploy this to your phone.
SECOND NOTE: If you can't get any XAP's to deploy try turning ICS on then off again, it may correct some errors.
Rcf686 said:
Yes this works on the Focus S. You will have to download the wireless manager from the samsung section of the marketplace so you can get your 4G back after doing the interop unlock.
Click to expand...
Click to collapse
burguins said:
What I thought was, maybe there's a problem in deploying the interop XAP, since I was using PHONE7MARKET to deploy the app. I launched again with Microsoft's XAP deployment tool, and it worked this time.
Click to expand...
Click to collapse
rich27 said:
I found the fix for the 8107 update, the following registry tweak needs to be made:
[HKEY_LOCAL_MACHINE\Services\ICS]
"UserProcGroup"=dword:32
Set the "UserProcGroup" value from "32" to "5" will make IS work fine. Don't forget to reboot your phone.
Click to expand...
Click to collapse
tnmilenium said:
It looks like I might have found a solution to my problem. I went back and reinstalled the xap for this hack which did create the missing registry entries. However I was still having the data problem. So I starting thinking about how my phone is different from most of the people using this hack and thought to turn off sim security. That seems to have done the trick. I am guessing that with sim security turned on ADC is not doing what its supposed to because the sim card is locked until the OS has fully booted and I put in my pin to unlock it. Since I really dont know what ADC does this is just a guess however I have only had a few minor data issues since turning sim security off. Anyone else out there having data issues should give this a try and let us know if it helps out.
Click to expand...
Click to collapse
Bjd223 said:
Anyone with data issues try:
Diagnosis > *#32489# > Back > Back (to Phone Control) > [7] Network Control > [1] GFC > [3] Setting Cancellation
Wait for it to say success, then reboot. This fixed all my data connection issues after applying this patch.
Click to expand...
Click to collapse
vip_snoopy said:
I just found the solution my wifi/cellular data 3G/4G conflict problem!
After numerous restart and changing different APN in Wireless Manager without any success, I went into WiFi settings panel and deleted my stored Wi-Fi networks. After rejoining, I got online instantly! Try it if all others fail!
Click to expand...
Click to collapse
Over 8000 downloads before last update. Only 25 thanks.
Nice work! Good idea to combine the ProvXMLs and include re-running AutoDataConfig.
Works Smoothly. Tested with Samsung Focus 1.3 Mango
Sent from my Nexus S using XDA App
http://a0.twimg.com/profile_images/1269956713/****-yea_normal.jpg
About app
My Question: how does it works with interop unlocked devices?
Can they also go this way to recieve thetering?
thx for answeres
Omnia7xdax said:
My Question: how does it works with interop unlocked devices?
Can they also go this way to recieve thetering?
thx for answeres
Click to expand...
Click to collapse
If your device is already interop unlocked it will stay that way and no harm will come to you
Awesome, it worked perfectly!
Just wanted to update that one of the forum members found that if one has kept Internet Sharing On and try to deploy XAP file it fails. Read it here
One should turn it off and then deploy XAP files.
voluptuary said:
As long as your device is unlocked in some way (Developer/Chevron/Other) you can get internet sharing on your Samsung phone.
1.) First install the WP Dev Tools and unlock your Samsung phone.
2.) Use the Application Deployment tool to send THIS to your phone. You do not need to run it and you can delete it after it has been deployed.
3.) Install the Diagnosis app by typing ##634#
4.) After the Diagnosis app starts type *#9908# and select 'System Tweaks' press 'Save' then 'Close' and restart your phone.
5.) Your phone now has internet sharing and as a bonus is interop unlocked!
PS: You need to have a recent firmware on your phone or your diagnosis app and drivers will not be new enough to work.
EDIT: I built the file depoyer app using the tools provided by Heathcliff74 so many thanks to him! Also ADC is built in as well so no need to worry about that and I also upped the max number of connections from 3 to 5 devices.
Click to expand...
Click to collapse
Okay I have samsung focus v1.3, latest firmware (Mango), diagnositic v922, and successfully deploy xap file to my phone, but I dont see any system tweaks in drop down, all I see is gumi, suwon2g, and suwon3g test bed. Am I missing something? Thanks
TX Admiral said:
Okay I have samsung focus v1.3, latest firmware (Mango), diagnositic v922, and successfully deploy xap file to my phone, but I dont see any system tweaks in drop down, all I see is gumi, suwon2g, and suwon3g test bed. Am I missing something? Thanks
Click to expand...
Click to collapse
You actually don't have the newest firmware. After the Mango update you should get one more update that is a Samsung update for your drivers and it also includes a new diagnosis app. If you don't get this update notification when you connect to Zune you can try sending THIS update package to your phone to get the newest diagnosis app but this is at your own risk and I don't know that internet sharing will work without the newest Samsung driver update.
lol, i did actually have the new firmware, what actually happen, the mango update alone with the new samsung drivers didnt update my old diagnostic app, so all I had to do is uninstall the old diagnostic from my phone, then re type in the ##634# code to reload it and bam Diagnostic ver .0103 was now there. Your suggested helped me figured that out, thanks again.. It now works
any idea whether the new "extra settings" on the Smasung Omnia can be found this way , its gotta be somewhere close , doesnt have to actually even be on the older phones , but I assume with the new firmware it was added , I dont know if the firmware is the same for the newer devices , Samsung deliberately deleted us 1st generation phone users from the newer software for some reason , others have proven its capable of using it
Two things you should know:
- deploying xaps just works if the screen is unlocked!
- internet doesn work on the phone after the xap has been deployed - but there is a solution:
---
I saw "internet connection sharing" in the settings but couldn't enable it because my phone didn't have a internet connection itself.
So don't forget you have to repair your internet settings on the phone! Samsung's official "Netzprofil" app ("network profiles" in english?) did the job for me. I changed to an other operator, afterwards changed again to the correct one and rebooted the phone...
hugohabicht said:
Two things you should know:
- deploying xaps just works if the screen is unlocked!
- internet doesn work on the phone after the xap has been deployed - but there is a solution:
---
I saw "internet connection sharing" in the settings but couldn't enable it because my phone didn't have a internet connection itself.
So don't forget you have to repair your internet settings on the phone! Samsung's official "Netzprofil" app ("network profiles" in english?) did the job for me. I changed to an other operator, afterwards changed again to the correct one and rebooted the phone...
Click to expand...
Click to collapse
ADC is built in. You have to restart like it says in the directions... So no you don't have to repair your internet settings all you have to do is read the directions. Also the screen has to be unlocked to deploy ANY xap that's just how it is.
voluptuary said:
ADC is built in. You have to restart like it says in the directions... So no you don't have to repair your internet settings all you have to do is read the directions. Also the screen has to be unlocked to deploy ANY xap that's just how it is.
Click to expand...
Click to collapse
Sorry - didn't work for me. After clicking "save" i waited another 10 seconds, clicked "Exit", closed (back button) the diagnosis app and rebooted the phone.
Rebooting means that i switched it off and/but it turned on again automatically because I didn't remove the USB cable...
The screen unlocking hint was just to help unexperienced users (like me). The App Deployment tool just gives an error number if you forget to unlock...
I don't think my post was completely senseless (thinking of users being new to the topic) but...sry for the noise
hugohabicht said:
Sorry - didn't work for me. After clicking "save" i waited another 10 seconds, clicked "Exit", closed (back button) the diagnosis app and rebooted the phone.
Rebooting means that i switched it off and/but it turned on again automatically because I didn't remove the USB cable...
The screen unlocking hint was just to help unexperienced users (like me). The App Deployment tool just gives an error number if you forget to unlock...
I don't think my post was completely senseless (thinking of users being new to the topic) but...sry for the noise
Click to expand...
Click to collapse
What phone do you have? Is it a 1st gen phone or 2nd? ADC 'should' fix the internet issues. I don't know why it wouldn't for you.
Can this save you from having to pay extra for Internet sharing if you purchased a Focus S? Or will you still have to call and have it provisioned through att? Thanks.
kwill said:
Can this save you from having to pay extra for Internet sharing if you purchased a Focus S? Or will you still have to call and have it provisioned through att? Thanks.
Click to expand...
Click to collapse
Yes, if you use this it will get rid of the message that pops up telling you you need a new plan for it. I just tried it on my Focus S. However I would be cautious though, I used to tether my Focus all the time and AT&T caught on and now if I tether at all again they will automatically switch me to a more expensive 4GB tethering plan from my unlimited plan.
And thank you OP, I interop-unlocked my Focus S and it has been a pain getting getting my AT&T settings configured again. I tried all the methods from the interop-unlock guide, with the exception of SIM unlocking my phone and using the Network Profiler app, and none of them would work. I also tried editing the APN but that doesn't give you options for MMS. This xap was the only way I was able to edit RunADC successfully and now everything is perfect. Thanks a lot!
clfosk said:
Yes, if you use this it will get rid of the message that pops up telling you you need a new plan for it. I just tried it on my Focus S. However I would be cautious though, I used to tether my Focus all the time and AT&T caught on and now if I tether at all again they will automatically switch me to a more expensive 4GB tethering plan from my unlimited plan.
And thank you OP, I interop-unlocked my Focus S and it has been a pain getting getting my AT&T settings configured again. I tried all the methods from the interop-unlock guide, with the exception of SIM unlocking my phone and using the Network Profiler app, and none of them would work. I also tried editing the APN but that doesn't give you options for MMS. This xap was the only way I was able to edit RunADC successfully and now everything is perfect. Thanks a lot!
Click to expand...
Click to collapse
OK, thanks much for that. Maybe I'll try it. It's for my brother's phone, so not sure how much tinkering he's willing to put up with.
Revert Back
Is there a way to revert this ? I am getting lot of Inertop Exception with many other apps.
Hi, guys! Do you know if it is possible to install the old Skype app for Windows Phone 8.1 on a Windows 10 phone instead of Skype Preview? I hope there is a way to do it, as Skype Preview is cr*p right now. It makes more problems now than few months ago. Since one month ago it has issues with video calls, and since less than a week it has issues with audio too.
I have tried to usual Skype from here, but it would always give my this error message.
Can't install app
There's a problem with this app. Check the package, or contact there person who gave it to you for help.
Click to expand...
Click to collapse
Thank you in advance!
It won't connect to the serwer anyway
Are you sure about that? Because my father still has Skype on his Windows Phone 8.1 phone, and it works really well for him. Maybe some older version won't connect right now, but there latest version should work fine. The version for which I have found the xap file is 2.32.0.48. This entry entry at appx4fun was updated in December 14, 2016.
I too expected the old Skype to stop working by now, but it's still alive and kicking, while I'm seeing issue with the Skype Preview app on daily basis.
Sent from mTalk on Windows 10 phone
I am not sure that is why I did told it to you
I still think that it should be possible to make the old Skype work on w10m. Maybe it's going to be shut down soon, maybe it's going to work only few more weeks, or perhaps even less, but even that would be better than having to deal with that buggy hell of Skype Preview app...
Sent from mTalk on Windows 10 phone
sure, waste more time
I understand you point of view, but if somebody knows how to do this, or if somebody has the correct .xap file, I don't see how would that be a waste of time. With the right file I'm asking for it would be done in few minutes.
Please, if there is somebody who can tell something helpful, please do. Of course, an answer like "that can't be fine because of that and that" would be useful too. Only as far as I can see, djtonka doesn't know whether this can be done or not.
Sent from mTalk on Windows 10 phone
1 - Version 2.32.0.48 is the last for WP8.1.
2 - I have no issue to deploy Skype 2.32.0.48 on my 950XL.
3 - Your phone is interrop unlock because xap use ID_CAP_INTEROPSERVICES.
Thank you for your reply! So what I need to do is to get the latest InteropTool, install it on my phone, and then within the InteropTool which will show up in the Settings to enable installing apps from xap files? And then it should work?
Sent from mTalk on Windows 10 phone
garisa said:
and then within the InteropTool which will show up in the Settings to enable installing apps from xap files? And then it should work?
Click to expand...
Click to collapse
not needed, just interop unlock cap enabled
And for that I'm gonna have to download Application Deployment tool? Asking just in case, to know if there is a quicker way.
Thank you very much for helping.
Sent from mTalk on Windows 10 phone
dxdy said:
not needed, just interop unlock cap enabled
Click to expand...
Click to collapse
Oh, and can you tell me his to do it? I tried it with interop Tools, but that would only work for x5x devices.
Sent from mTalk on Windows 10 phone
Did you ever deployed xap from PC to phone?
No, I have never done that. By the way, I have noticed that you have replied to me in the thread vcREG: lumia reg editor + interop unlock. Now Supports X50 device interop unlock too, so I will keep the discussion there from now on.
titi66200 said:
1 - Version 2.32.0.48 is the last for WP8.1.
2 - I have no issue to deploy Skype 2.32.0.48 on my 950XL.
3 - Your phone is interrop unlock because xap use ID_CAP_INTEROPSERVICES.
Click to expand...
Click to collapse
Could you share with me the xap file for Skype which you have used? Just in case if there's something wrong with mine, which was downloaded from appx4fun.
Sent from mTalk on Windows 10 phone
So it really always that I need to use another xap file. As dxdy suggested in another thread, it could be that this xap file is encrypted, and that I need a patched xap file.
Does anybody hear have a patched Skype xap?
Sent from mTalk on Windows 10 phone
Microsoft Skype_v2.32.0.48.xap
Thank you very much for this xap file. I have tried to install the old Skype on the phone right away, but Skype haven't shown up in the app list. I just copied the xap file to the SD card, and tapped on it, and chose the option to install the app. I haven't seen any error message this time though. I tried it several times, after restarts, and with different settings in Interop Tools. Still not showing up.
I have also tried to do this with Skype Preview being uninstalled. How about you, do you have both version of Skype on your Lumia 950, or you had to choose between those two? Or you chose not to use Skype Preview after making the old Skype work.
Could that be that I the phone hasn't been interop unlocked yet?
Again, thanks you very much, guys, for helping!
Sent from mTalk
garisa said:
Thank you very much for this xap file. I have tried to install the old Skype on the phone right away, but Skype haven't shown up in the app list. I just copied the xap file to the SD card, and tapped on it, and chose the option to install the app. I haven't seen any error message this time though. I tried it several times, after restarts, and with different settings in Interop Tools. Still not showing up.
Click to expand...
Click to collapse
no, you must deploy XAP file from PC to phone (phone must connected via USB)
https://forum.xda-developers.com/showpost.php?p=71269427&postcount=264
use tool from step 4
And in that case interop unlock wouldn't be necessary? (I mean hypothetically.)
Thanks, I will look into that tomorrow evening, or the day after. I won't be able to try it sooner.
Sent from mTalk on Windows 10 phone
I have this on my phone (see attached file) I can't remove it. I even try the store trick. but it doesn't work. Is there another way?
TIA!
Your phone is interopunlocked? You could try to sideload the xap or install the appx of this application.
Yup, its interop unlock. My problem is how to get the appx file for that app.
https://www.microsoft.com/en-us/store/p/screen-sketch/9mz95kl8mr0l
Min OS version is 17636.0.
So you will need to be on some fastfaster ring insider. Skip ahead?
I think u need to be on the skip a head. But initially, that app can be downloaded even if you are on fast ring build. Then they change it. Thats why i got the pending issue.
augustinionut said:
Your phone is interopunlocked? You could try to sideload the xap or install the appx of this application.
Click to expand...
Click to collapse
I manage to get the appx file. Then tried to sideload it. But got the same result.
Sideloading XAP worked for me.
xbatibotx said:
I have this on my phone (see attached file) I can't remove it. I even try the store trick. but it doesn't work. Is there another way?
TIA!
Click to expand...
Click to collapse
I had the same issue with old twitter app when I recently updated to W10M. The new version didn't replaced the WP8.1 version and old one was shown as 'Pending'. So I sideloaded the old WP8.1 xap and then it managed the corrupted files. And then uninstalled it.
The ultimate solution when nothing works is Reset, even though this is a very small issue
Ani64 said:
I had the same issue with old twitter app when I recently updated to W10M. The new version didn't replaced the WP8.1 version and old one was shown as 'Pending'. So I sideloaded the old WP8.1 xap and then it managed the corrupted files. And then uninstalled it.
The ultimate solution when nothing works is Reset, even though this is a very small issue
Click to expand...
Click to collapse
I don't want to reset my phone. BTW, if I reset my phone that is interop unlock, will it remain unlocked?
You have to unlock it again
xbatibotx said:
I don't want to reset my phone. BTW, if I reset my phone that is interop unlock, will it remain unlocked?
Click to expand...
Click to collapse
No, you will have to interop unlock it and apply those registry edits you have modified (except the cab files) again.
Try sideloading xap/appx and uninstall it.
I understand even if you can leave it off, it feels so bad and you cannot forget it.
Ani64 said:
No, you will have to interop unlock it and apply those registry edits you have modified (except the cab files) again.
Try sideloading xap/appx and uninstall it.
I understand even if you can leave it off, it feels so bad and you cannot forget it.
Click to expand...
Click to collapse
I will think about resetting my phone. Btw, I did try sideloading the appx file. but unfortunately, It didn't work.
RE: xap deployer., I can't make it work. It is not detecting my phone.
The appx must to be copied to phone and ten click on it.
Or install using device portal.
CAn you upload the appx to this topic?
AppxBundle is here
https://forum.xda-developers.com/showpost.php?p=76643216&postcount=6
But can't be installed because
<TargetDeviceFamily Name="Windows.Universal" MinVersion="10.0.17636.0" MaxVersionTested="10.0.17636.0" />
Any chance to repack app?
Yes, any chance of repacking the app..?
titi66200 said:
AppxBundle is here
https://forum.xda-developers.com/showpost.php?p=76643216&postcount=6
But can't be installed because
<TargetDeviceFamily Name="Windows.Universal" MinVersion="10.0.17636.0" MaxVersionTested="10.0.17636.0" />
Click to expand...
Click to collapse
I hope someone can repack the app.
Hi All
I had Inshot app in my s20+ for 1+ years. Yesterday I have uninstalled to update to new version (mod apk). After uninstalling , I cant install new version as it says signature doesnt match with existing application.
This is really frucked up situation as the same happened to zedge and vanced youtube with me. But these 2 apps was gone when I upgraded the firmware to Android 11 3.1 one UI.
Any help guys???
problem solved.
Easy steps.
Wait. Me too. instruct me please
ckshahzad said:
problem solved.
Easy steps.
Click to expand...
Click to collapse
i had clear all data on CHPlay & Google Services. But nothing change for Inshot
secretlonely said:
i had clear all data on CHPlay & Google Services. But nothing change for Inshot
Click to expand...
Click to collapse
U need a pc and use adb for this...it worked smoothly.
ckshahzad said:
U need a pc and use adb for this...it worked smoothly.
Click to expand...
Click to collapse
Hmmm you right. Thanks for idea. I'll try
ckshahzad said:
U need a pc and use adb for this...it worked smoothly.
Click to expand...
Click to collapse
please what does this mean?
adb
I have exactly the same problem with inshot. I uninstalled it to update a new version, but after install a new version, it says "signature doesnt match with existing application."
What do you mean with adb? Is it an uninstaller, like "Revo Uninstaller" software?
Please can anybody help me?
My problem is solved. I have a better solution then the ADB:
Go to: internal sdcard > android > data > then find the package: com.camerasideas.instashot and just delete this package. After that, you must restart your Smartphone and then you can install the new version of Inshot.
one thing I would like to say here is that whenever you want to install any update of an application you should simply goto the update panel in playstore and simply update from there. You don't need to install the app first and then reinstall to get its updated version. I hope you would get it.
Having this problem myself now. Phone does not have the com.camerasideas.instashot folder. Can't install any version of the app
Did anyone find the fix. I deleted the folder with com.camerasidea... but it didn't help. Please let me know if anyone solved the issue.
Thank you
Is there a way to fix this without resetting the phone?
ckshahzad said:
problem solved.
Easy steps.
Click to expand...
Click to collapse
How did you solve it?
Can anyone help to to delete that file when I uninstalled the app it gave me the option to keep the file I clicked on it and now I can not install the app anymore. Does anyone to know to delete that folder or file manually.
Thank You
inshot initializing problem
Did anyone figure this out yet? I am facing the same problem
ckshahzad said:
U need a pc and use adb for this...it worked smoothly.
Click to expand...
Click to collapse
Hi,
Can u please walk me through the process?
Thank You
I cannot share the link here. If possible share ur email id...I will share the link of the site
Sure, [email protected]
Thank you
ckshahzad said:
I cannot share the link here. If possible share ur email id...I will share the link of the site
Click to expand...
Click to collapse
Hi folks,
Hope you are all fine !
I uninstalled Magisk but some apps still detect it's "rooted" which prevent them from opening. Would you have any ideas what cleaning I could do to avoid these apps to wrongly detect root ?
I'm running A13 stable TP1A.221005.02.
Thanks in advance !
5t4rC0m1337 said:
Hi folks,
Hope you are all fine !
I uninstalled Magisk but some apps still detect it's "rooted" which prevent them from opening. Would you have any ideas what cleaning I could do to avoid these apps to wrongly detect root ?
I'm running A13 stable TP1A.221005.02.
Thanks in advance !
Click to expand...
Click to collapse
My guess is that you still have the bootloader unlocked.
If you decide to re-lock the bootloader, it's gonna factory reset & wipe all data.
KOLIOSIS said:
My guess is that you still have the bootloader unlocked.
If you decide to re-lock the bootloader, it's gonna factory reset & wipe all data.
Click to expand...
Click to collapse
Thanks for the suggestion.
I didn't think app could verify this so easily.
I'd like as much as possible to not wipe the device, is there any way to confirm what triggered the app to find the "root" though it is not rooted any longer ? Any logs I could check perhaps ?
Thanks in advance -
One other thing is to remove the magisk app .apk if you downloaded it. Some programs do scan your files and if they see magisk in your files they deem you as "rooted".
Cheers,
B.D.
5t4rC0m1337 said:
Thanks for the suggestion.
I didn't think app could verify this so easily.
I'd like as much as possible to not wipe the device, is there any way to confirm what triggered the app to find the "root" though it is not rooted any longer ? Any logs I could check perhaps ?
Thanks in advance -
Click to expand...
Click to collapse
Before factory resetting, you could also try a dirty flash of the latest firmware.zip or using the official online Google Pixel Flash Tool.
BostonDan said:
One other thing is to remove the magisk app .apk if you downloaded it. Some programs do scan your files and if they see magisk in your files they deem you as "rooted".
Cheers,
B.D.
Click to expand...
Click to collapse
I don't think apps are allowed to read other app's data by default anymore?
mko000 said:
I don't think apps are allowed to read other app's data by default anymore?
Click to expand...
Click to collapse
It is not reading another apps data. It literally is scanning filenames. If you grant an app permission to read/write files, it can read any downloaded file to determine if it is magisk related.
Cheers,
B.F.
BostonDan said:
It is not reading another apps data. It literally is scanning filenames. If you grant an app permission to read/write files, it can read any downloaded file to determine if it is magisk related.
Cheers,
B.F.
Click to expand...
Click to collapse
I would be very suspicious of any app requesting such a permission, if it doesn't really need it.
Hi Folks,
Thanks everyone for your suggestions !
I removed all Magisk apps files, applications which needed root (though I'm not root, but was), and this fixed the issue here (I had in my hide list from nova an app called Root Explorer and I think the issue got resolved after I uninstalled it lol).
Have a great evening !
On a side note, moving to A13 ruined my great battery life, sadge.
I had poor battery on Sept A13 release. Oct A13 security release seemed to fix this.
Cheers,
B.D.