Develop Bugs

[Q] HTC ONE M8, No Storage. Help pleasee!

Hello friends, i hope you can help me because i ****ed up real bad today... I was in cwm recovery, and press some button that said something like "format for rom" or something like that... Now i dont have any SO installed, no rom on my phone, and it says i have 0mb avalaible. So i flashed the TWRP recovery because im more familiar with it, i have tried sideload but get this error con the cmd window after it gets to 100% * failed to write data 'protocol fault (no status)' *
On the phone i have: E: No valid storage partitions.
Any help please? Already tried adb push rom.zip /data or /sdcard but since i have 0mb for storage on my phone i think any of that will work. I can flash recoverys, but cant move any rom to my phone to flash Help please

Ok it seems that i was able to push the rom.zip to my /system but when i try to flash it, it says:
E: Unable to mount /data
E: Unable to find storage partition to mount to usb

worms45 said:
Ok it seems that i was able to push the rom.zip to my /system but when i try to flash it, it says:
E: Unable to mount /data
E: Unable to find storage partition to mount to usb
Click to expand...
Click to collapse
What carrier are you on?

How does that matter? The phone was originally at&t. I need to format my storage or my /data or something to be able to install the rom

Can't install CWM Recovery

My galaxy S3 Crash and TWRP says it can't mount anything internal. So I thought I would install CWM Rcovery and see what happens. I used Odin and it says it went find, but I noticed that the progress bar on the phone never displayed. When I reboot, TWRP is still there. What's wrong?

Reflash with Odin but don't check auto reboot. After flashing cwm, remove cable, remove battery, replace battery, he button combo to get into recovery.

Same thing. Odin sees the phone, then acts like it is flashing, but I never see anything happen on the phone itself. I thought normally there is a progress bar to show something is uploading, but nothing happens. When I go into recovery mode, I am back in the teamwin screen which takes about 3 minutes to boot. When I go to the TWRP log, I see:
E: Could not mount /data and unable to find crypto footer.
E: Unable to mount '/data'
E: Unable to recreate /data/media folder/
Updating partition details...
E: Unable to mount '/system'
E: Unable to mount '/data'
E: Unable to mount '/cache'
E: Unable to mount internal storage
E: Unable to mount /data/meda during GUI startup
E: Unable to mount '/cache'
E: Full SELinux support is present.
Running boot script...
Finished runing boot script
E: Unable to mount '/cache'
E: Unable to mount /data/media/TWRP/.twrps when trying to read settings file
E: Unable to mount '/data'

Is the phone an i747 or i747m?
Have you tried mounting the data partition in twrp and formatting it using a Windows machine?

0MB Internal Storage in TWRP

Hello everyone,
I have a little problem with TWRP on my LG G3 (D855, 32 GB).
I installed TWRP two months ago and flashed CyanogenMod 12.1.
Now I've noticed that TWRP (2.8.6.0) shows the Internal Storage with 0MB.
When I tap the middle Icon on the bottom of the TWRP Main screen, I get an (maybe helpful?) output:
Code:
E: Could not mount /data and unable to find crypto footer.
E: Unable to mount '/data'
E: Unable to recreate /data/media folder.
Updating partition details...
E: Unable to mount '/data'
...done
E: Unable to mount storage
E: Unable to mount /data/media during GUI startup.
Full SELinux support is present.
E: Unable to mount /data/media/TWRP/.twrps when trying to read settings file.
E: Unable to mount '/data'
MTP Enabled
I'm a bit confused. Could this be, because I used CyanogenMod's Device Encryption?
I'm planning on reverting to Stock Rom (...i quite liked it. And considering the camera quality, CM isn't really any better), but i fear this (or flashing anything different) could brick my phone, since there seems to be something strange.
Is there any way to debug or even fix this?
Is it safe to revert to Stock, when TWRP doesn't even detect the Internal Storage? (following this Guide: http://forum.xda-developers.com/showthread.php?t=2785089)
I'd be glad about any help oder hint, about how to proceed. Thanks in advance!

First, update your TWRP version to 2.8.7.0 (available here: http://forum.xda-developers.com/lg-g3/orig-development/recovery-twrp-touch-recovery-2-8-2-0-t2966129 )
Then, boot into TWRP, go to Wipe and choose "Format Data".
After done that, reboot your device into recovery again.

Thank you very much. I will try this.

i had that , but dont remember what i did ,, but i do know you need to format , by fastboot or twrp and repair partitions

It happens often to me when I upgrade.
I use 3 phones: Xperia Z2, LG G3, Samsung Galaxy S2 and when I've updated to Lollipop it happened all three times.
Recently I noticed that also on the S2 happened this and I suppose it's because partitions are not initialized.
I was unable to write to internal partition (0 MB) and I've solve this way:
I've flashed CyanogenMod, mounted the internal memory as flashdrive under windows and simply formated it.
When I've disconnected the phone from the pc, Android was able to write normally to the internal storage and everything worked like a charm.
I know it's not possible (AFAIK) to mount internal memory on stock roms as Mass Storage, but perhaps someone will point you on how to correctly fix partitions without using my method.

Looks like Kill Switch Wiped
Did you find any solution, even i am struggling with same problem. I think LG G3 has kill switch that wiped out everything, but not sure just guess.

Have same problem any help?

Problems with data partition

Hi,
I tried to flash viperOS using squid twrp for moto G5S, but something in the process i think i did wrong.
My phone model is montana xt1790.
I unlocked the bootloader.
I tried to install the recovery, but had same problem than @dau999
dau999 said:
Bootloader gives me a notification that the img is not signed or corrupt (squids one)
Click to expand...
Click to collapse
I tried to flash "no-verity-opt-encrypt-5.1.zip" file posted as solution here https://forum.xda-developers.com/showpost.php?p=74813124&postcount=23.
After this i have working the recovery, but i believe this is what did wrong:
With debug mode enabled, after a wipe clean (Cache, Data, Dalvik/ART and system) and format data (wipe all your apps, backups, pictures, videos, media and removes encryption on internal storage) got this errors:
Code:
Could not mount /data and unable to find crypto folder.
Failed to mount '/data' (Invalid argument)
Unable to recreate /data/media folder.
Unable to mount storage.
Unable to mount /data/media/TWRP/.twrps
Failed to mount '/data' (Invalid argument)
After this errors i flashed ViperOS, but after first boot it, first thing viper OS ask me was the phone password, after i enter it, the phone show up a message saying that password is ok but data is corrupt, restarting and trying to fix my phone without success (same errors like failed to mount /data)
Also i tried to use the "repair or change file system" selecting Data partition, twrp show me this: http://oi65.tinypic.com/2prin8y.jpg, also i got this errors:
Code:
/sbin/fsck.f2fs /dev/block/mmcblk0p54 process ended with ERROR: 255
Unable to repair Data
What should i do?, i don't know is related with an encryption on data partition, or if this can be solve.
EDIT:
Found the solution in reddit: www.reddit.com/r/AndroidQuestions/comments/7w5c75/used_the_format_data_option_in_twrp_recovery_on/
Just fixed the issue after making a second format in TWRP ( WIPE > FORMAT DATA)

Problem with N7100 and TWRP

Hi,
i have a problem with my N7100. When it boots it starts to get in a logo loop and it doesnt go into the OS. I can go in the TWRP but it cant mount the internal storage or the sd card. If i try the sideload an image from my pc it aborts at 0.00% and when i try to flash it with odin it aborts after start nand writing. In the TWRP log it says Unable to find partition size for '/boot', Unable to find partition size for '/recovery' and Unable to find partition size for '/modem'. After this it says Primary vlock device '/dev/block/mmcblk0p16' for mount point '/data' is not present.
Does anyone has the same problem and has fix it ? Or is the internal storage of my device broken ?
Best regards
Saarconvoy