After a bad flash, the tablet does not turn and is recognized as Quacomm QDloader 9800.
Send me debrick.img to transfer on the SD or the SDC files?
Thank you all.
What happen if you press Vol Down + Power? That should get you into the low level Odin Loader.
Same situation. Tablet is recognized as Quacomm QDloader 9800. No enter to download mode.
hi
press " Vol Down + Power + home "
regards
Related
Hi,
My HTC816 is bricked after auto shutdown. I can't enter HBOOT or Fastboot mode.
Below is some tests I have done.
1. Phone will not turn on...
2. power + vol up (not work)
3. power + vol down (not work)
4. power + vol up and down (not work)
5. Charge led (not work)
But when I attached on PC, I can see the device "Qualcomm HS-USB Qdloader 9008" enumerated in device manager. Does anyone know how to fix it? Thanks!
exactly the same problem, is there a solution?
mlgshih said:
Hi,
My HTC816 is bricked after auto shutdown. I can't enter HBOOT or Fastboot mode.
Below is some tests I have done.
1. Phone will not turn on...
2. power + vol up (not work)
3. power + vol down (not work)
4. power + vol up and down (not work)
5. Charge led (not work)
But when I attached on PC, I can see the device "Qualcomm HS-USB Qdloader 9008" enumerated in device manager. Does anyone know how to fix it? Thanks!
Click to expand...
Click to collapse
did you get any solution for this?
Hi guys,
i was using it normally as usual. then the phone shut down suddenly automatic. after that i can't open the system. I think its a hard brick. there is no NO Recovery mode, No download mode. press power button no response. now just the computer shows "QHSUSB_BULK" in device manager. anyway to unbrick?
Lenovo Vibe P1 not power on when press power buttion show green light on notification and connect to pc show HS-USB Diagnostics 9006 mode.
try to flash qfil and other tools but fail to go in download mode. try all volume keys up and down but not go in download mode.
sharrymz said:
Lenovo Vibe P1 not power on when press power buttion show green light on notification and connect to pc show HS-USB Diagnostics 9006 mode.
try to flash qfil and other tools but fail to go in download mode. try all volume keys up and down but not go in download mode.
Click to expand...
Click to collapse
Download mini partition tool and delete all partition on phone, then format all as ext4 primary
its read only partitions problem is 9006 diagnostic mode to 9008 download mode.
My phone is Lenovo Vibe P1 (c72) No display only blue light and when connect to pc 9006 mode try all keys no recovery no display no vibrate.
my recovery menu is not working. I stuck in quallcomm hs-usb diagnostics 9006 mode and cannot go the hs-usb qdloader 9008 option
* Press vol + and put USB cable: cannot go hs-usb qdloader 9008 mode
* Press vol + and vol - and power -> cannot go diagnostics menu
* When plug in usb, push power button -> cannot go hs-usb qdloader 9008 mode
I try all combinations but I cannot go to the hs-usb qdloader 9008 mode. Is there any possibility to recover phone on hs-usb diagnostics 9006 mode?
sharrymz said:
its read only partitions problem is 9006 diagnostic mode to 9008 download mode.
My phone is Lenovo Vibe P1 (c72) No display only blue light and when connect to pc 9006 mode try all keys no recovery no display no vibrate.
my recovery menu is not working. I stuck in quallcomm hs-usb diagnostics 9006 mode and cannot go the hs-usb qdloader 9008 option
* Press vol + and put USB cable: cannot go hs-usb qdloader 9008 mode
* Press vol + and vol - and power -> cannot go diagnostics menu
* When plug in usb, push power button -> cannot go hs-usb qdloader 9008 mode
I try all combinations but I cannot go to the hs-usb qdloader 9008 mode. Is there any possibility to recover phone on hs-usb diagnostics 9006 mode?
Click to expand...
Click to collapse
Write me a pm
help me please.........same problem but device is different......
same problem with me bro my lyf wind 1 is also in same mode I also did the same thing I think you can solve my problem please consider my issue........
I belive that this issue doesn't depend on the device model and it depends on the processor.....my processor is QUALCOMM snapdragon 410 with 1200 MHz clocking speed....
thanks in advance
bhsrgavkumar said:
same problem with me bro my lyf wind 1 is also in same mode I also did the same thing I think you can solve my problem please consider my issue........
I belive that this issue doesn't depend on the device model and it depends on the processor.....my processor is QUALCOMM snapdragon 410 with 1200 MHz clocking speed....
thanks in advance
Click to expand...
Click to collapse
download minipartition tool, and delete all partition, then go and format all to primary ext4 without any label.
sure sir i'll try it if i have any queries i'll ask you,thanks for your valuable time
bro,YOU ARE THE BEST,JUST BECAUSE OF YOU I AM ABLE TO GET MY MOBILE BACK TO LIFE...........LOVE YOU
Starchm said:
download minipartition tool, and delete all partition, then go and format all to primary ext4 without any label.
Click to expand...
Click to collapse
I format it as ext4. But I can't load the rum. Com 3 sees the device on port 9008. No display and charge indicator. Qfil is failing. Can you help?
Device: Lenovo P1A42 s288
i am sorry but i have searched a lot but i couldn't unbrick my ZUK Z2, i flashed the Deodexed stock ROM and then the screen went all black with the LED glowing. If i press the power button i just see the ZUK logo and the screen goes black, i tried to boot it into fastboot but no luck. I somehow managed to get into the 9008 mode but while flashing with QFIL i get the sahara error saying unable to read header or something and with MiFlash i am getting "cannot read hello packet"
Any Help will be appreciated
EDIT:
The device has been fixed, i had to press the download button on the QFIL as soon as my phone boots into EDL mode.
did you flash through twrp? and if your bootloader if unlocked then you should have 5 sec bootloader placeholder from where u can reboot recovery . and if you are stuck into something different then it will be difficult to recover but possible. for sahara fail , play with settings in qfil like emmc, reset ,etc and try.And you can remove the port from device manager and retry if u r getting 9008 port.You should not get sahara fail. You will be get out of this easily just try things suggested. Your device is live as zuk logo is showing so dont worry.
And use latest qfil: http://www.androidbrick.com/download/download-latest-qualcomm-flasher-qfil-qpst-2-7-460/#
EDIT: Try this too-
Bootloader mode: shutdown state, press and hold the volume plus key + volume minus key, while the usb line connected to the computer until the release button.
Qualcomm QPST (9008 port) : shutdown state, press and hold the volume plus key, press the power button at the same time usb cable to connect the computer. This mode is a black screen state.
For recovery: press and hold the power key + the volume plus key + the volume down key until you release the release button.
Just buy DFC cable a.k.a Deep Flash Cable. The cable is same as you wire cable manualy
Kalp3sh S1NGH said:
i am sorry but i have searched a lot but i couldn't unbrick my ZUK Z2, i flashed the Deodexed stock ROM and then the screen went all black with the LED glowing. If i press the power button i just see the ZUK logo and the screen goes black, i tried to boot it into fastboot but no luck. I somehow managed to get into the 9008 mode but while flashing with QFIL i get the sahara error saying unable to read header or something and with MiFlash i am getting "cannot read hello packet"
Any Help will be appreciated
Click to expand...
Click to collapse
Onces that you are in 9008 mode you need to use ADB
"Adb reboot edl"
You are a lucky guy, i needed to conect grenn and black cable of the smartphone to put in 9008 mode
ozi87 said:
Onces that you are in 9008 mode you need to use ADB
"Adb reboot edl"
You are a lucky guy, i needed to conect grenn and black cable of the smartphone to put in 9008 mode
Click to expand...
Click to collapse
So i plug my phone in 9008 mode and go straight to adb?
Kalp3sh S1NGH said:
So i plug my phone in 9008 mode and go straight to adb?
Click to expand...
Click to collapse
Have you both any idea about adb! Edl is itself 9008 mode also called download mode. Adb is debug bridge and it is used in OS to control it by this bridge from PC.
pixel0 said:
Have you both any idea about adb! Edl is itself 9008 mode also called download mode. Adb is debug bridge and it is used in OS to control it by this bridge from PC.
Click to expand...
Click to collapse
yes exactly, that's why i asked.
pixel0 said:
did you flash through twrp? and if your bootloader if unlocked then you should have 5 sec bootloader placeholder from where u can reboot recovery . and if you are stuck into something different then it will be difficult to recover but possible. for sahara fail , play with settings in qfil like emmc, reset ,etc and try.And you can remove the port from device manager and retry if u r getting 9008 port.You should not get sahara fail. You will be get out of this easily just try things suggested. Your device is live as zuk logo is showing so dont worry.
And use latest qfil: http://www.androidbrick.com/download/download-latest-qualcomm-flasher-qfil-qpst-2-7-460/#
EDIT: Try this too-
Bootloader mode: shutdown state, press and hold the volume plus key + volume minus key, while the usb line connected to the computer until the release button.
Qualcomm QPST (9008 port) : shutdown state, press and hold the volume plus key, press the power button at the same time usb cable to connect the computer. This mode is a black screen state.
For recovery: press and hold the power key + the volume plus key + the volume down key until you release the release button.
Click to expand...
Click to collapse
I think the bootloader is locked again, i can't boot into recovery. I tried the latest QPST and still getting unable to read packet header read 0 bytes error and Sahara Failed.
Kalp3sh S1NGH said:
I think the bootloader is locked again, i can't boot into recovery. I tried the latest QPST and still getting unable to read packet header read 0 bytes error and Sahara Failed.
Click to expand...
Click to collapse
If bootloader is locked or unlocked , 9008 mode will work for sure. Also Use buttons combination to enter fastboot if u can then unlock and flash recovery from there .
To avoid this problem again, when you flash stock roms after using Custom Roms, make sure you format the System, data and cache partitions back to EXT4 format, since Stock firmware (even the moded ones) DOES NOT support any other System/Data/ Cache format.
After loading the bootloader, the phone will end with black screen and white led on. You just need to reboot on recovery again and advance format System/ Data/ Cache back to EXT4, connect the phone to the PC again, transfer the ROM file to the internal storage and make the Flash again...
Hope this help you
Today I Bricked My LG820Qm
I was updating my Lg g8 using LG UP, When the Process on 64% my PC power off
After that my phone stuck in Qualcomm HS-USM QDLoader 9008
Any solution to come out from this mode to Downloaded Mode so that i can update using LG up.
I was updating G820QM10i_00_NAO_US_OP_0401 to G820QM20b_00_NAO_US_OP_1224
My LG up LGUP_Lab_Frame_Ver_1_16_0_3
Can you try to switch to download mode by press&hold VOL+ while inserting the USB cable (connected to PC). Phone needs to be off while doing so.
tron1 said:
Can you try to switch to download mode by press&hold VOL+ while inserting the USB cable (connected to PC). Phone needs to be off while doing so.
Click to expand...
Click to collapse
I tried not working
If i press&hold VOL+ while inserting the USB cable still my phone come with Qualcomm HS-USB Mode
thanks for your reply
What happens if you press&hold VOL- (furing the whole procedure) push the power button until the phone vibrates, release the button und press&hold the power button?
tron1 said:
What happens if you press&hold VOL- (furing the whole procedure) push the power button until the phone vibrates, release the button und press&hold the power button?
Click to expand...
Click to collapse
Which ever combination, Vol- + power phone power of
with in sec it boot to Qualcomm mode
I don't know where to ask so I'm gonna try here. My G820N is stuck on Android 10 beta. Whenever I flash an official kdz, it only allows for emergency calls. Can't do anything. Any help would be appreciated
Following, in right here with ya.
atsuisofu said:
Following, in right here with ya.
Click to expand...
Click to collapse
Try entering download mode with phone disconnected from USB cable.
Also try to see if it gets recognized by LG-UP or by LG Bridge. These 2 softwares don't need download mode to be able to flash, just the phone to be recognized on some PORT.
Try also factory reset hard menu. Also try switching between Slot A and Slot B. There is also this backup method. Phone is not dead on one of those slots.
If nothing works (but slot a slot b should 100% work) , wait for the firehose, it's just around the corner. That will restore the phone back 100%.
For more info search v50thinq on telegram app. :good:
I can t get to download as it freezes and without the USB cable it doesn't even try and enter. I appreciate the recommendations. I was thinking of the a/b seit hbut without the use of fastboot I am at a loss of how to switch between the two as I thought the system chose and the switch happened upon rebooting once a system had been selected ie as in turning the unit off after loading the os set a flag to go to the opposite system upon completing the inftframs and boot sequence.
vikramanananda said:
Which ever combination, Vol- + power phone power of
with in sec it boot to Qualcomm mode
Click to expand...
Click to collapse
Hi, i'm facing the same problem today, my QM will not go into any mode other than the Qualcomm mode. Were you able to recover your phone finally ?
vikramanananda said:
Which ever combination, Vol- + power phone power of
with in sec it boot to Qualcomm mode
Click to expand...
Click to collapse
did you ever get it fixed. im having the same problem.
johnnycm77 said:
did you ever get it fixed. im having the same problem.
Click to expand...
Click to collapse
me too, do you fix it?
vikramanananda said:
Today I Bricked My LG820Qm
I was updating my Lg g8 using LG UP, When the Process on 64% my PC power off
After that my phone stuck in Qualcomm HS-USM QDLoader 9008
Any solution to come out from this mode to Downloaded Mode so that i can update using LG up.
I was updating G820QM10i_00_NAO_US_OP_0401 to G820QM20b_00_NAO_US_OP_1224
My LG up LGUP_Lab_Frame_Ver_1_16_0_3
Click to expand...
Click to collapse
So, if the device, as you say, lost power during an update like that, then almost assuredly you have at least one, if not numerous corrupted partitions.
And, it's specific partitions on the device that allow it to enter download mode. One of these most know about or have heard of is the laf partition. But other have to be there also for it to work, I don't remember exactly what the others off the top of my head, but that info is easily found.
The key thing you need (or any others commenting same prob), is to be able to enter EDL mode and have qfil installed and recognizing the device. If you can get that far, it would be easy to find the correct partitions you could flash with qfil and then immediately go from qfil to download mode.
Many many people have done this. Just get qfil set up (see guides section) and get the device recognized. that takes some effort but it's def doable.