***SOLVED***
WiddleyScudds said:
After I downloaded and clicked install on the latest OTA from Lineage (Z00A) , my phone rebooted to recovery (TWRP 3.0.2 M1), and then nothing happened. It didn't install anything. I searched for the file manually in recovery but couldn't find the update. So I rebooted to system, and now the phone really just wants to boot into recovery and nothing else. Cannot boot to system no matter how many times I try and re install. I have formatted data. I have tried flashing the previous build. The phone isn't recognized by xFSTK, and I can't get into the bootloader. The only things I have access to us TWRP and adb side load. Can someone help?
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=71188306&postcount=2
Fixed. Delete.
WiddleyScudds said:
Fixed. Delete.
Click to expand...
Click to collapse
Thanks
Edit your thread ***SOLVED***:good:
timbernot said:
Thanks
Edit your thread ***SOLVED***:good:
Click to expand...
Click to collapse
Will do. Sorry this phone freaks me out often.
I have the same problem, what can I do?
I have used the ze551ml_toolkit, worded fine so far. Than I have installed LineageOS 14.1, worked properly. After an update I have got stuck in a TWRP bootloop.
Help?
Did you wipe the dalvik/cache?
Gasus said:
I have the same problem, what can I do?
I have used the ze551ml_toolkit, worded fine so far. Than I have installed LineageOS 14.1, worked properly. After an update I have got stuck in a TWRP bootloop.
Help?
Click to expand...
Click to collapse
When you used modder , it flashed 3 0 2 M1 TWRP ?
You need 3 0 3 M4 TWRP for the latest update of linOS.
The TWRP version required is NOW in linOS OP (first post of linOS thread)
Thx
timbernot said:
When you used modder , it flashed 3 0 2 M1 TWRP ?
You need 3 0 3 M4 TWRP for the latest update of linOS.
The TWRP version required is NOW in linOS OP (first post of linOS thread)
Click to expand...
Click to collapse
Thank you indeed, I´ve seen that they linked the newer version of TWRP. Didn´t think about that, cause I´ve downloaded the update in the installed system.
Kind regards
Gasus said:
Thank you indeed, I´ve seen that they linked the newer version of TWRP. Didn´t think about that, cause I´ve downloaded the update in the installed system.
Kind regards
Click to expand...
Click to collapse
Good stuff
Related
Hello folks,
I just spend a couple of hours trying to get some new software on my Z1C. My inital plan was to flash PA 4.4 final, but that didn't really work out. Here's what happend:
1) I received the 108 update OTA. I used EasyRootTool ( ht tp://forum.xda-developers.com/showthread.php?t=2784900) with option 2 to regain root access. That seemed to work so far. Afterwards I tried to installed lockeddualrecovery using the Z1C-lockeddualrecovery2.7.129-BETA.installer, and here things started to get strange. I couldn't boot into CWM, so I made a backup using TWRP.
2) I unlocked my bootloader
3) I flashed PA following the instructions given in the thread: ht tp://forum.xda-developers.com/showthread.php?t=2764775
4) I was stuck with a bootloop, showing the PA start screen.
So I tried to roll back using the TWRP backup I made before unlocking the bootloader, but TWRP won't recognize the backup. I tried putting it in a folder named TWRP, directly into the root folder, interal SD, external SD...all the same, it just doesn't show up. I also can't install one of my older CWM backups, as trying to boot into CWM leads to a bootloop showing the "SONY" screen.
So I decided to flash a stock ROM (D5503_14.4.A.0.108_GenericDE_(1279-6978)) using flashtool and repeated the procedure. Again, I'm stuck with a TWRP that won't recognize its own backup and a broken CWM. Same if I start with D5503_14.3.A.0.757_GenericDE_(1279-6978).
Finally I managed to install CWM using the older version Z1C-lockeddualrecovery2.7.128-BETA.installer.zip. My question therefore: Was I doing something wrong or could this be a bug in Z1C-lockeddualrecovery2.7.129-BETA.installer.zip?
matt.s said:
Hello folks,
My question therefore: Was I doing something wrong or could this be a bug in Z1C-lockeddualrecovery2.7.129-BETA.installer.zip?
Click to expand...
Click to collapse
It`s a bug, you didn´t made something wrong!
czrtst said:
It`s a bug, you didn´t made something wrong!
Click to expand...
Click to collapse
Thanks, so if I'm using Z1C-lockeddualrecovery2.7.128-BETA and follow the instructions from the PA 4.4 thread, it shouldn't matter if I come from 108 or 757 right? Right now I'm on 757, so I would prefer to upgrade from here straight to PA 4.4
czrtst said:
It`s a bug, you didn´t made something wrong!
Click to expand...
Click to collapse
I have the same problem. Somebody tried it with new version (Z1C-lockeddualrecovery2.7.130-BETA.installer)?
lovasjoe said:
Somebody tried it with new version (Z1C-lockeddualrecovery2.7.130-BETA.installer)?
Click to expand...
Click to collapse
Doesn`t work with CWM:
http://forum.xda-developers.com/showpost.php?p=53783354&postcount=2378
Use 128 beta and you'll be fine. 129 didn't work for me either.
crótach said:
Use 128 beta and you'll be fine. 129 didn't work for me either.
Click to expand...
Click to collapse
It works with Z1C-lockeddualrecovery2.7.132-BETA! :laugh:
lovasjoe said:
It works with Z1C-lockeddualrecovery2.7.132-BETA! :laugh:
Click to expand...
Click to collapse
confirm Z1C-lockeddualrecovery2.7.132-BETA
Hello there,
This is my first XDA thread! This is an issue I ran into.
I just installed CM 14.1 on my OP3. I downloaded the latest TWRP from the official website before flashing it.
Here is the problem. After setting up my ROM, like installing all the required apps, I'm not able to boot into recovery. I tried flashing TWRP again, I downloaded the oneplus recovery from your website and I flashed that one too.
I erased recovery partition and installed both of them again (erasing each time). What happens is, after booting into the bootloader, I select recovery to go to the recovery and it stays blank, unless I reset it by holding the buttons.
Please let me know what I can do.
Same happened to me also. But somehow I fixed it by installing TWRP again by using OnrPlus 3 toolkit. Here is the toolkit forum.xda-developers.com/oneplus-3/development/tool-tool-one-driversunlocktwrpfactory-t3398993. Can't post links. Don't forget to put http:// front of it
SillyPython said:
Same happened to me also. But somehow I fixed it by installing TWRP again by using OnrPlus 3 toolkit. Here is the toolkit forum.xda-developers.com/oneplus-3/development/tool-tool-one-driversunlocktwrpfactory-t3398993. Can't post links. Don't forget to put http:// front of it
Click to expand...
Click to collapse
Thanks for the reply.
Are you sure what happened to is exactly what happened to you? Because I tried the ToolKit and it is not working. I tried both the versions of the TWRP and Stock recovery.
If you know anything else about this issue that would help me. I'd love to hear it.
SillyPython said:
Same happened to me also. But somehow I fixed it by installing TWRP again by using OnrPlus 3 toolkit. Here is the toolkit forum.xda-developers.com/oneplus-3/development/tool-tool-one-driversunlocktwrpfactory-t3398993. Can't post links. Don't forget to put http:// front of it
Click to expand...
Click to collapse
Also. Does encryption affect this in anyway, because I did it. I don't want to factory reset my phone because this is my primary phone and I don't have another phone. And I don't want to risk it, at least for a few days.
malachiseelam said:
Hello there,
This is my first XDA thread! This is an issue I ran into.
I just installed CM 14.1 on my OP3. I downloaded the latest TWRP from the official website before flashing it.
Here is the problem. After setting up my ROM, like installing all the required apps, I'm not able to boot into recovery. I tried flashing TWRP again, I downloaded the oneplus recovery from your website and I flashed that one too.
I erased recovery partition and installed both of them again (erasing each time). What happens is, after booting into the bootloader, I select recovery to go to the recovery and it stays blank, unless I reset it by holding the buttons.
Please let me know what I can do.
Click to expand...
Click to collapse
Modified TWRP version should do it
Same, when I flashed cm 14.1 I also got blank TWRP.
michielokt said:
Same, when I flashed cm 14.1 I also got blank TWRP.
Click to expand...
Click to collapse
Then, what did you do?
LS.xD said:
Modified TWRP version should do it
Click to expand...
Click to collapse
Thanks LS.xD. You are awesome. I completely messed up my old Moto X and I didn't have a smartphone until now. I hesitated a lot before installing all custom stuff until I gave in. And this problem made me worry a lot.
Thanks a lot.
michielokt said:
Same, when I flashed cm 14.1 I also got blank TWRP.
Click to expand...
Click to collapse
Michielokt, you should try flash the recovery LS.xD gave the link to, it booted.
malachiseelam said:
Thanks LS.xD. You are awesome. I completely messed up my old Moto X and I didn't have a smartphone until now. I hesitated a lot before installing all custom stuff until I gave in. And this problem made me worry a lot.
Thanks a lot.
Michielokt, you should try flash the recovery LS.xD gave the link to, it booted.
Click to expand...
Click to collapse
Thanks it worked!
Please try the modified TWRP, 3.0.2-22
FOR SOLUTION READ POST:
[SIZE="5"]https://forum.xda-developers.com/showpost.php?p=71007646&postcount=6[/SIZE]
Long time silent reader here. I always find solutions for my problems in xda-devs, until now.
Hope you guys can help me once again..
So, yesterday I messed up my OP3 and wiped all partitions on my phone.
I've tried many steps, trying to flash a flashable stock rom (the one with boot.img and system img) in fastboot, result= installation succeed, but getting blackscreen on boot.
Installing full OOS rom from adb sideload using stock recovery, result= failed (* cannot read 'OnePlus3Oxygen_16_OTA_039_all_1701140133_03b794d8a8b44883.zip' *)
Installing full OOS rom from adb sideload using TWRP recovery, result= failed (* cannot read 'OnePlus3Oxygen_16_OTA_039_all_1701140133_03b794d8a8b44883.zip' *)
Copy the rom to my phone, and installing the zip with TWRP, result failed (error=7)
So far these are my references:
https://forums.*neplus.net/threads/guide-mega-unbrick-guide-for-a-hard-bricked-oneplus-3.452634/
OnePlus3Oxygen_16_OTA_039_all_1701140133_03b794d8a8b44883.zip
OnePlus3Oxygen_16_OTA_008_all_1606122244_e0cfc5ffc8bf411a.zip
oxygen-os-3.2.5-fastboot-flashable.zip
twrp 3.0.3
https://forum.xda-developers.com/showthread.[/CODE]php?t=2588979
Click to expand...
Click to collapse
applsaus said:
Long time silent reader here. I always find solutions for my problems in xda-devs, until now.
Hope you guys can help me once again..
So, yesterday I messed up my OP3 and wiped all partitions on my phone.
I've tried many steps, trying to flash a flashable stock rom (the one with boot.img and system img) in fastboot, result= installation succeed, but getting blackscreen on boot.
Installing full OOS rom from adb sideload using stock recovery, result= failed (* cannot read 'OnePlus3Oxygen_16_OTA_039_all_1701140133_03b794d8a8b44883.zip' *)
Installing full OOS rom from adb sideload using TWRP recovery, result= failed (* cannot read 'OnePlus3Oxygen_16_OTA_039_all_1701140133_03b794d8a8b44883.zip' *)
Copy the rom to my phone, and installing the zip with TWRP, result failed (error=7)
So far these are my references:
Click to expand...
Click to collapse
So twrp is working right?
Flash any rom say lineage os
Flash multirom by BitOBSessiOn
Flash multirom twrp
Flash oos as secondary rom
And then swap oos to primary rom
try with some other TWRP . May be v16 blu_spark
https://forum.xda-developers.com/devdb/project/?id=15934#downloads
Ye sideboard gives me issues aswell, push the zip and manually flash it In twrp: "adb push romzipname /sdcard/", the file is now ib the folder /sdcard/.
Puddi_Puddin said:
Ye sideboard gives me issues aswell, push the zip and manually flash it In twrp: "adb push romzipname /sdcard/", the file is now ib the folder /sdcard/.
Click to expand...
Click to collapse
tried it with OOS 3.2.8 and OOS 4.0.2, both give me ERROR=7
abhi0502 said:
So twrp is working right?
Flash any rom say lineage os
Flash multirom by BitOBSessiOn
Flash multirom twrp
Flash oos as secondary rom
And then swap oos to primary rom
Click to expand...
Click to collapse
Working on it. Flashed lineage os, looks like working.
Still waiting on boot screen tho (15 mins & counting, hope it won't be bootloop)
hyperorb said:
try with some other TWRP . May be v16 blu_spark
https://forum.xda-developers.com/devdb/project/?id=15934#downloads
Click to expand...
Click to collapse
Good idea, I'll put ur idea for the next try
applsaus said:
tried it with OOS 3.2.8 and OOS 4.0.2, both give me ERROR=7
Working on it. Flashed lineage os, looks like working.
Still waiting on boot screen tho (15 mins & counting, hope it won't be bootloop)
Good idea, I'll put ur idea for the next try
Click to expand...
Click to collapse
Then it's a twrp issue. I'm currently in Bluspark v16 so
Error 7 in TWRP AFAIK is an issue with using an incompatible recovery, try the latest one 3.0.4-1 I think it is from this forum.
Puddi_Puddin said:
Then it's a twrp issue. I'm currently in Bluspark v16 so
Click to expand...
Click to collapse
ghostofcain said:
Error 7 in TWRP AFAIK is an issue with using an incompatible recovery, try the latest one 3.0.4-1 I think it is from this forum.
Click to expand...
Click to collapse
I flash twrp bluspark as @Puddi_Puddin suggested and flashing Freedom OS. After that, I restore my data using my last Nandroid backup, then the bootloop comes again. Tried it several times using TWRP Bluspark with different ROMs, still no luck. So I suggest, there's nothing I can do to restoring my phone's data.
I read across the XDA forums and Oneplus forums that some people had similar issues for me, and they suspected something's wrong about corrupted partition, not because twrp version. And I also had tried flashing a few ROM in the past using the same TWRP 3.03 version without any problems. Strange.
Anyway, problems solved, my phone's up and running.
CASE CLOSED.
Thanks XDA
P.S: MODS Please Lock/Close this thread
applsaus said:
Anyway, problems solved, my phone's up and running.
CASE CLOSED.
Thanks XDA
P.S: MODS Please Lock/Close this thread
Click to expand...
Click to collapse
And, what was the solution ?
Restarting from Zero I guess.
Donglip said:
And, what was the solution ?
Click to expand...
Click to collapse
This:
hyperorb said:
try with some other TWRP . May be v16 blu_spark
https://forum.xda-developers.com/devdb/project/?id=15934#downloads
Click to expand...
Click to collapse
emuandco said:
Restarting from Zero I guess.
Click to expand...
Click to collapse
Better than not starting at all, at least.
Hey guys,
i had CM13 on my phone an i wanted to try a new rom. So i did all the steps like it is written in the thread. After i used the wipe function my phone is always starting in twrp and i cant install a new rom and i also can't update my twrp.
Is my phone now ****ed up or can i do anything to save?
Thx
dg89 said:
Hey guys,
i had CM13 on my phone an i wanted to try a new rom. So i did all the steps like it is written in the thread. After i used the wipe function my phone is always starting in twrp and i cant install a new rom and i also can't update my twrp.
Is my phone now ****ed up or can i do anything to save?
Thx
Click to expand...
Click to collapse
You should be able to boot to bootloader if it's the same problem I have. You can then either flash the stock recovery or this version of TWRP which should fix the problem; https://forum.xda-developers.com/showpost.php?p=70296158&postcount=79
tiklmypikl said:
You should be able to boot to bootloader if it's the same problem I have. You can then either flash the stock recovery or this version of TWRP which should fix the problem; https://forum.xda-developers.com/showpost.php?p=70296158&postcount=79
Click to expand...
Click to collapse
thank you but its not working. i can't install the new version twrp and i also tried to install cm13 again and it is not working
dg89 said:
thank you but its not working. i can't install the new version twrp and i also tried to install cm13 again and it is not working
Click to expand...
Click to collapse
What verison of TWRP are you on?
tiklmypikl said:
What verison of TWRP are you on?
Click to expand...
Click to collapse
right now it is on v2.8.7.0 and i tried to install the new version but it's not working
hi, i am having aproblem right now trying to flash miui 12. first time i just formatted the phone in twrp. used adb push to push the zip on the phone. and flashed it. it was successful but after booting into the system it had a password for some reason and there was no setup screen. so i tried to reflash by formatting again and repeating the process. now i boot into system and it just goes into bootloop at the MI boot screen.
Its super weird that it worked the first time. then it doesnt work anymore no matter what (adb sideload, multiple recoveries) and it seems the rom isnt installing correctly because afterwards i cannot flash magisk (cannot mount system partition)
Use fox twrp to flash.
haovh_85 said:
Use fox twrp to flash.
Click to expand...
Click to collapse
I used TWRP. Also tried orangefox
haovh_85 said:
Use fox twrp to flash.
Click to expand...
Click to collapse
I also tried flashing the firmware first
-iwl- said:
hi, i am having aproblem right now trying to flash miui 12. first time i just formatted the phone in twrp. used adb push to push the zip on the phone. and flashed it. it was successful but after booting into the system it had a password for some reason and there was no setup screen. so i tried to reflash by formatting again and repeating the process. now i boot into system and it just goes into bootloop at the MI boot screen.
Its super weird that it worked the first time. then it doesnt work anymore no matter what (adb sideload, multiple recoveries) and it seems the rom isnt installing correctly because afterwards i cannot flash magisk (cannot mount system partition)
Click to expand...
Click to collapse
Wait for some days,when some one success.
I have also flashed the rom first day.
I struggle for 1 hour with my laptop than i booted into LOS 17.1 after destroying my whole 100 gb internal data of my phone.
paradise220 said:
Wait for some days,when some one success.
I have also flashed the rom first day.
I struggle for 1 hour with my laptop than i booted into LOS 17.1 after destroying my whole 100 gb internal data of my phone.
Click to expand...
Click to collapse
did you encounter the same issue? this person has it correctly installed:
https://www.youtube.com/watch?v=x5HJgH8QrMs
also. sometimes it says no os instlaled after i flashed
paradise220 said:
Wait for some days,when some one success.
I have also flashed the rom first day.
I struggle for 1 hour with my laptop than i booted into LOS 17.1 after destroying my whole 100 gb internal data of my phone.
Click to expand...
Click to collapse
i have no idea what to do now
-iwl- said:
did you encounter the same issue? this person has it correctly installed:
https://www.youtube.com/watch?v=x5HJgH8QrMs
also. sometimes it says no os instlaled after i flashed
Click to expand...
Click to collapse
when i flashed miui 12 beta it showed on operating software installed before reboot.
paradise220 said:
when i flashed miui 12 beta it showed on operating software installed before reboot.
Click to expand...
Click to collapse
it seems they released a broken rom. i tested again with lineage os and it worked perfectly. so its xiaomi at fault here
Ive installed It yesterday (dont know where but i Saw someone saying that It need Magisk, i flashed It and It worked).
But i turned back to oficial miui 11, my sim card was not working with this beta
Use chinese twrp
JrAdams said:
Ive installed It yesterday (dont know where but i Saw someone saying that It need Magisk, i flashed It and It worked).
But i turned back to oficial miui 11, my sim card was not working with this beta
Click to expand...
Click to collapse
Gapps or any google related services doesnt seem to be working with this beta. lots of bugs encountered too, i might just go back to havoc os
Yunus Ceyhan said:
Use chinese twrp
Click to expand...
Click to collapse
Got it working already. just had to flash magisk along with the rom