Develop Bugs

[Q] Radio not working in custom ROM I9082

I bought I9082 from China Unicom (which I believe is firmware locked).
I tried to upgrade the firmware manually through ODIN.
But in ODIN it stops at setup connection
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Then I rooted with CWM and loaded Custom ROM.
Later I upgraded a custom rom - XXAMD6 on baseband ZNMAMB3.
But the problem now is Radio is switched off. So the mobile is not active.
When I try to make a call it says Flight mode is activated. But really flight mode is switched off.
I am able to receive calls and messages
Do you have any solution for this.
Does this mean the firmware is locked?
Any possibility that I can revert back to original stock ROM I9082ZNAMB3
I have this stock ROM downloaded but could not load this through ODIN (seems there is some lock since it stops at setup connection in ODIN).
Any possibility that this stock ROM can loaded through CWM?
My phone is kind of half-bricked since I couldn't make any call also not able to upgrade.
Please give me solution.

mr_coimbatore said:
I bought I9082 from China Unicom (which I believe is firmware locked).
I tried to upgrade the firmware manually through ODIN.
But in ODIN it stops at setup connection
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Then I rooted with CWM and loaded Custom ROM.
Later I upgraded a custom rom - XXAMD6 on baseband ZNMAMB3.
But the problem now is Radio is switched off. So the mobile is not active.
When I try to make a call it says Flight mode is activated. But really flight mode is switched off.
I am able to receive calls and messages
Do you have any solution for this.
Does this mean the firmware is locked?
Any possibility that I can revert back to original stock ROM I9082ZNAMB3
I have this stock ROM downloaded but could not load this through ODIN (seems there is some lock since it stops at setup connection in ODIN).
Any possibility that this stock ROM can loaded through CWM?
My phone is kind of half-bricked since I couldn't make any call also not able to upgrade.
Please give me solution.
Click to expand...
Click to collapse
you may experience "no service " after rom installation here is what u do to get it back...
its a modem compatibility issue in between different firmwares
download the file from http://www.mediafire.com/?avjo48kvgz517z5 or http://d-h.st/7O8 NEW MODEM LINK
put ur mobile in download mode VOLUME DOWN + MENU + POWER then VOLUME UP to continue
connect to pc
(ur kies should not be runing... proper drivers should be installed)
start odin3 v3.04 . u should see the blue comxx as phone is connected
autoreboot and reset time should be selected.
click in PDA . select the modem.amc8.tar
click start...wait....u get pass confirmation..phone may boot into recovery just reboot.
JUST leave the feedback on this... it worked for me....so it may work for all of u.

Hi, I could not download any file through Odin. I tried pushing the modem file already. Do you think there is any firmware lock?
During setup connection it stays for long time and then it says failed.
Any modem MOD file to push through ClockworkMod I can try.

mr_coimbatore said:
Hi, I could not download any file through Odin. I tried pushing the modem file already. Do you think there is any firmware lock?
During setup connection it stays for long time and then it says failed.
Any modem MOD file to push through ClockworkMod I can try.
Click to expand...
Click to collapse
follow this guide http://forum.xda-developers.com/showthread.php?t=2280248 . make ur own custom rom from ur stock firmware & flash it u will have ur radios back.
or contact @tonylin880806 he is trying to make one rom for ur device.

Hi, Do you know why I could not upgrade firmware or push anything through ODIN?

mr_coimbatore said:
Hi, Do you know why I could not upgrade firmware or push anything through ODIN?
Click to expand...
Click to collapse
it may be carrier locked!!!

unlock carrier lock
k2wl said:
it may be carrier locked!!!
Click to expand...
Click to collapse
Any solution to unlock this carrier locked phone without buying the unlock tools?

mr_coimbatore, I'm having exactly the same problem with a China Unicom I9082 here in Shanghai. Sadly I still haven't been able to find a solution, after weeks of searching.
It's actually a friend's phone, he bought it because he wanted a dual SIM Android handset, though foolishly bought it straight from Unicom rather than from an electronics market. I told him I'd get rid of the China Unicom firmware for him as it is obviously crippled by design like all Chinese Android stock ROMs. I've managed to install k2wl's Ultralite ROM on the handset but I'm facing the same issue as you - the baseband remains untouched from the one that was on the original ROM (I9082ZNAMB3), but it's stuck in flight mode. Can receive calls/texts, cannot make them.
The big clue that there is some kind of lock in place is the fact that one of the original Chinese logos still appears on boot. Flashing a custom ROM should remove all the stock boot logos.
I get exactly the same error when trying to update the baseband with Odin (I tried several basebands and all had exactly the same error as the one you quoted in your first post), so it seems that what we have here is a baseband lock combined with an incompatibility between the existing baseband and the custom ROM (or, more likely, any ROM that isn't the stock ROM provided by China Unicom). If we can remove the baseband lock and update the baseband to one that is compatible with the custom ROM, we should be in business. Sadly, that's as far as I've got.
The annoying thing is that the SIM cards being used on the phone are both China Unicom, so it's not as if I even need the phone to be factory unlocked for use on any network - I simply need it to be able to make outgoing calls/texts on Unicom!
I have seen sites offering an unlock service by IMEI, for example unlocksamsungonline.com, who claim to provide both NCK (network unlock codes) and SPCK (service provider unlock codes), which seem to be what we need in order to unlock the phone without expensive equipment.
However, I have no idea how genuine/reliable these kinds of sites are or if they even work at all (or if they're even legitimate at all), and I'd rather not spend $18.95 USD on an unlock code that doesn't end up working. Also, given that it's a dual SIM phone it's going to have 2 IMEI numbers, so I'm not sure if I'd have to pay double to unlock it or if just one would do the trick!
I've not yet had the time to take the phone to an electronics market in the hope that somebody there understands the issue and has the equipment to remove the baseband lock. In almost all of my previous experiences with electronic markets here in Shanghai, I've found that their hardware knowledge is fantastic (not surprising given that the phones are made in China), but their software knowledge is generally quite poor. I actually spent almost an hour one day explaining to an iPhone engineer that he could in fact upgrade an iPhone's software while preserving an (unlockable) baseband, simply by making a custom ISPW with Pwnagetool or similar that would flash the new firmware without flashing the baseband. He and several of his coworkers claimed that it was impossible, and when I showed them my iPhone that was running the updated iOS while still on an old baseband, until I managed to explain the entire process he thought I had hacked the phone somehow to display a different baseband version... the whole experience was incredibly frustrating and to be honest has left me thinking that I can probably find out more online whenever I've had any kind of software issues with any devices.
Anyway. If you happen to have some success before I do, please let me know! I'll do the same.

Solution
kinggimped said:
mr_coimbatore, I'm having exactly the same problem with a China Unicom I9082 here in Shanghai. Sadly I still haven't been able to find a solution, after weeks of searching.
It's actually a friend's phone, he bought it because he wanted a dual SIM Android handset, though foolishly bought it straight from Unicom rather than from an electronics market. I told him I'd get rid of the China Unicom firmware for him as it is obviously crippled by design like all Chinese Android stock ROMs. I've managed to install k2wl's Ultralite ROM on the handset but I'm facing the same issue as you - the baseband remains untouched from the one that was on the original ROM (I9082ZNAMB3), but it's stuck in flight mode. Can receive calls/texts, cannot make them.
The big clue that there is some kind of lock in place is the fact that one of the original Chinese logos still appears on boot. Flashing a custom ROM should remove all the stock boot logos.
I get exactly the same error when trying to update the baseband with Odin (I tried several basebands and all had exactly the same error as the one you quoted in your first post), so it seems that what we have here is a baseband lock combined with an incompatibility between the existing baseband and the custom ROM (or, more likely, any ROM that isn't the stock ROM provided by China Unicom). If we can remove the baseband lock and update the baseband to one that is compatible with the custom ROM, we should be in business. Sadly, that's as far as I've got.
The annoying thing is that the SIM cards being used on the phone are both China Unicom, so it's not as if I even need the phone to be factory unlocked for use on any network - I simply need it to be able to make outgoing calls/texts on Unicom!
I have seen sites offering an unlock service by IMEI, for example unlocksamsungonline.com, who claim to provide both NCK (network unlock codes) and SPCK (service provider unlock codes), which seem to be what we need in order to unlock the phone without expensive equipment.
However, I have no idea how genuine/reliable these kinds of sites are or if they even work at all (or if they're even legitimate at all), and I'd rather not spend $18.95 USD on an unlock code that doesn't end up working. Also, given that it's a dual SIM phone it's going to have 2 IMEI numbers, so I'm not sure if I'd have to pay double to unlock it or if just one would do the trick!
I've not yet had the time to take the phone to an electronics market in the hope that somebody there understands the issue and has the equipment to remove the baseband lock. In almost all of my previous experiences with electronic markets here in Shanghai, I've found that their hardware knowledge is fantastic (not surprising given that the phones are made in China), but their software knowledge is generally quite poor. I actually spent almost an hour one day explaining to an iPhone engineer that he could in fact upgrade an iPhone's software while preserving an (unlockable) baseband, simply by making a custom ISPW with Pwnagetool or similar that would flash the new firmware without flashing the baseband. He and several of his coworkers claimed that it was impossible, and when I showed them my iPhone that was running the updated iOS while still on an old baseband, until I managed to explain the entire process he thought I had hacked the phone somehow to display a different baseband version... the whole experience was incredibly frustrating and to be honest has left me thinking that I can probably find out more online whenever I've had any kind of software issues with any devices.
Anyway. If you happen to have some success before I do, please let me know! I'll do the same.
Click to expand...
Click to collapse
Hi, Yes I found the solution.
Thanks to tonylin880806 who provided me some links.
I am in Shanghai as well. I took my phone to electronics markets in Xujiahui and Zhangyang Road. In both places, every one said they cannot do anything. The reason may be they don't know or do not want to take any risk or bricking the phone.
Also I went to Samsung service center, they said I have void my warranty. I asked them only to restore the original firmware. But he said the only option is to change the CPU and that will cost more money. I asked for alternate options and he said no.
Then, I re-explored the posts asked if Tony has send me an option
At first, you should upgrade ZNAMB3 to ZNAMD1 with Odin. ZNAMD1 is the office OTA upgrade for ZNAMB3 sent by Samsung.
You can use below link for ZNAMD1 : http://pan.baidu.com/share/link?shar...&uk=3590848074
to download ZNAMD1 which is official and push this through Odin.
So now you will be back with your original firmware without google account.
After this, you can root the phone with CWM.
Then you can load any compatible custom ROMs. But you should note that our handsets cannot load firmwares of all countries. Might be they are firmware locked or modem not compatible for other region firmwares.
I have loaded below custom ROM which is very similar to original firmware with google account. This is really good.
ZNAMD1_rc2 - http://pan.baidu.com/share/link?shareid=517042&uk=2030731697
Also, in this your memory card is swapped with internal memory and have chrome browser. USB OTG is missing.
Only problem I face is, when I install google talk apk there is some problem. Whenever I get an incoming notification from google talk, it hangs and it says process.google.com stopped. So I have installed hangout and its ok with hangout now.
Hope this helps you.........

mr_coimbatore said:
Hi, Yes I found the solution.
Thanks to tonylin880806 who provided me some links.
I am in Shanghai as well. I took my phone to electronics markets in Xujiahui and Zhangyang Road. In both places, every one said they cannot do anything. The reason may be they don't know or do not want to take any risk or bricking the phone.
Also I went to Samsung service center, they said I have void my warranty. I asked them only to restore the original firmware. But he said the only option is to change the CPU and that will cost more money. I asked for alternate options and he said no.
Then, I re-explored the posts asked if Tony has send me an option
At first, you should upgrade ZNAMB3 to ZNAMD1 with Odin. ZNAMD1 is the office OTA upgrade for ZNAMB3 sent by Samsung.
You can use below link for ZNAMD1 : http://pan.baidu.com/share/link?shar...&uk=3590848074
to download ZNAMD1 which is official and push this through Odin.
So now you will be back with your original firmware without google account.
After this, you can root the phone with CWM.
Then you can load any compatible custom ROMs. But you should note that our handsets cannot load firmwares of all countries. Might be they are firmware locked or modem not compatible for other region firmwares.
I have loaded below custom ROM which is very similar to original firmware with google account. This is really good.
ZNAMD1_rc2 - http://pan.baidu.com/share/link?shareid=517042&uk=2030731697
Also, in this your memory card is swapped with internal memory and have chrome browser. USB OTG is missing.
Only problem I face is, when I install google talk apk there is some problem. Whenever I get an incoming notification from google talk, it hangs and it says process.google.com stopped. So I have installed hangout and its ok with hangout now.
Hope this helps you.........
Click to expand...
Click to collapse
Dude thanks so much for the walkthrough, I'm going to try that right now!
However, your first link doesn't work. Can you fix it so I can download the ZNAMD1 firmware please?

kinggimped said:
Dude thanks so much for the walkthrough, I'm going to try that right now!
However, your first link doesn't work. Can you fix it so I can download the ZNAMD1 firmware please?
Click to expand...
Click to collapse
First link is the official firmware ZNAMD1. You can even download the same from samfirmware or anyother websites.

mr_coimbatore said:
First link is the official firmware ZNAMD1. You can even download the same from samfirmware or anyother websites.
Click to expand...
Click to collapse
Yeah, the link you posted has the '...' in it, which ruins the URL. It's the not the complete URL. Do you have the full URL to download it on Baidu? It will be much faster than downloading it from another site, as you know from living in China and having to deal with Chinese internet connections
I just want to make sure I'm downloading the correct version. Is this the right one?
http://pan.baidu.com/share/link?shareid=419656&uk=554171356
---------- Post added at 10:40 PM ---------- Previous post was at 09:54 PM ----------
I got it working. Thanks SO much for your help, my mate will be really happy with it! All he wanted was Google stuff. That updated firmware did the job.
Thanks again!

Google Talk is now replaced by hang out..
Sent from Gt-I9082 stock AMCD firmware

hangout is cool

mr_coimbatore said:
Hi, Yes I found the solution.
Thanks to tonylin880806 who provided me some links.
I am in Shanghai as well. I took my phone to electronics markets in Xujiahui and Zhangyang Road. In both places, every one said they cannot do anything. The reason may be they don't know or do not want to take any risk or bricking the phone.
Also I went to Samsung service center, they said I have void my warranty. I asked them only to restore the original firmware. But he said the only option is to change the CPU and that will cost more money. I asked for alternate options and he said no.
Then, I re-explored the posts asked if Tony has send me an option
At first, you should upgrade ZNAMB3 to ZNAMD1 with Odin. ZNAMD1 is the office OTA upgrade for ZNAMB3 sent by Samsung.
You can use below link for ZNAMD1 : http://pan.baidu.com/share/link?shar...&uk=3590848074
to download ZNAMD1 which is official and push this through Odin.
So now you will be back with your original firmware without google account.
After this, you can root the phone with CWM.
Then you can load any compatible custom ROMs. But you should note that our handsets cannot load firmwares of all countries. Might be they are firmware locked or modem not compatible for other region firmwares.
I have loaded below custom ROM which is very similar to original firmware with google account. This is really good.
ZNAMD1_rc2 - http://pan.baidu.com/share/link?shareid=517042&uk=2030731697
Also, in this your memory card is swapped with internal memory and have chrome browser. USB OTG is missing.
Only problem I face is, when I install google talk apk there is some problem. Whenever I get an incoming notification from google talk, it hangs and it says process.google.com stopped. So I have installed hangout and its ok with hangout now.
Hope this helps you.........
Click to expand...
Click to collapse
isit this rom ZNAMD1_rc2 hhas French in its language list ? I have one to put french language !
Thx advanced !

it also work on a Unicom duos thx you @mr_coimbatore , after ZNAMD1 I flashed this I9082XXAMF7 custom rom and work correctly ...both sim working fine !!

I9082xxamf7
psytr0nic said:
it also work on a Unicom duos thx you @mr_coimbatore , after ZNAMD1 I flashed this I9082XXAMF7 custom rom and work correctly ...both sim working fine !!
Click to expand...
Click to collapse
Hi, Can you please send me the link from where you downloaded I9082XXAMF7 custom rom.

mr_coimbatore said:
Hi, Can you please send me the link from where you downloaded I9082XXAMF7 custom rom.
Click to expand...
Click to collapse
I took it there : #LINK not really customized , just rooted . Roms are 100% samsung stock one according to OP and what I saw too . nothing missing .

psytr0nic said:
I took it there : #LINK not really customized , just rooted . Roms are 100% samsung stock one according to OP and what I saw too . nothing missing .
Click to expand...
Click to collapse
Thanks for the link. It works perfectly.
XXAMF7 got loaded on the baseband version of ZNAM2.
I have the same problem like yours. As soon as it was loaded it said there is a software update, but when say OK to update the software it keeps searching. Have you got any solution for this?
Also, did you try if you upload the stock ROM of XXAMF7 on the unicom Duos? Whether the radio works?

psytr0nic said:
I took it there : #LINK not really customized , just rooted . Roms are 100% samsung stock one according to OP and what I saw too . nothing missing .
Click to expand...
Click to collapse
After update, firmware is still 4.1.2??
Do you have USB on the go (OTG) option. (Means can you connect the USB flash drive to you mobile by means of a adaptor cable??

[Q] Back to stock form Cyanogenmod 11

Hi, I've got samsung galaxy s advance. Few days ago I installed cyanogenmod 11 with 4.4.2 android version on it. Now i'd like to back to stock soft. To make that i wiped data/factory and I tap install form zip witch stock soft 4.2 android... After this i rebooted phone, but only what i saw were samsung logo, and nothing changes after that. Only what can i do right now is install back those CM 11. So is any way to bring back stock soft, which older version of android? Thx for any help

eXez said:
Hi, I've got samsung galaxy s advance. Few days ago I installed cyanogenmod 11 with 4.4.2 android version on it. Now i'd like to back to stock soft. To make that i wiped data/factory and I tap install form zip witch stock soft 4.2 android... After this i rebooted phone, but only what i saw were samsung logo, and nothing changes after that. Only what can i do right now is install back those CM 11. So is any way to bring back stock soft, which older version of android? Thx for any help
Click to expand...
Click to collapse
type in your model number here http://www.sammobile.com/firmwares/ i tryed looking for your phone I9070 and i see that there is not any firmware available for the USA so im guessing the device is not from the USA? also make sure you know which version of android you want. 2.3.6 is in some places and there is lots of 4.1.2 for other places.

this site should help me yes, like u said im not form USA, just form Poland. I found 2 firmwares for my phone form this website with 4.1.2 android, and that's what I'm looking for. But what does mean kies icon on this list? Because one of those firmwares doesn't have it and i dont know which one should i download.

eXez said:
this site should help me yes, like u said im not form USA, just form Poland. I found 2 firmwares for my phone form this website with 4.1.2 android, and that's what I'm looking for. But what does mean kies icon on this list? Because one of those firmwares doesn't have it and i dont know which one should i download.
Click to expand...
Click to collapse
i imagine that it only means it was pulled from kies, download the one without the kies icon and flash that in odin, do you know how to do that? when you go to download it i see there are instructions. if you dont understand i would be more than happy to help

[Q] Flash T210 4.4.2 firmware into T2105?

Hi, i bought a Galaxy Tab 3 7" Disney Edition but i don't care about kids stuffs, is it possible to flash it with latest T210 (ITV) firmware 4.4.2 with Odin?
My model is T2105 (ITV) and is still at 4.1.2
Thanks

It might work. Flash a custom (TWRP) recovery to backup the device first, then give it a try. Only problem is, anything could brick the device since there seems to be little to no info.
Some ideas:
Soe ifo on the recovery:
from http://forum.xda-developers.com/galaxy-tab-3/general/root-sm-t210-r-using-heimdall-t2936061
I used the Pit mapping for the T210. The recovery partition is "mmcblk0p10." I checked the partition info on my T210R using Partition Table by Lakshman. The T210R also has its Recovery partition on "mmcblk0p10," so I expect it to work no problem. And TWRP Odin flashables tend to be compatible with several 7.0 variants.
Click to expand...
Click to collapse
TWRP for tab 3 7.0
https://www.androidfilehost.com/?w=files&flid=12871
PIT files and info:
http://forum.xda-developers.com/showthread.php?t=2722948
ROMs
http://forum.xda-developers.com/galaxy-tab-3/general/tab-3-7-0-sm-t210-r-stock-4-4-2-kitkat-t2930075
CAUTION: Anything could result in bricking the device. Any attempt without any confirmed information is acceptance of the fact that the device may become completely unusable.
Please be willing to lose functionality of the device if you proceed.
There do seem to be Odin flashables for the 4.1 software, which should be able to recover the device, but I would obtain one of those first.
If you proceed, please keep us updated so that other users out there can find this information

Greaper88 said:
It might work. Flash a custom (TWRP) recovery to backup the device first, then give it a try. Only problem is, anything could brick the device since there seems to be little to no info.
Some ideas:
Soe ifo on the recovery:
from http://forum.xda-developers.com/galaxy-tab-3/general/root-sm-t210-r-using-heimdall-t2936061
TWRP for tab 3 7.0
https://www.androidfilehost.com/?w=files&flid=12871
PIT files and info:
http://forum.xda-developers.com/showthread.php?t=2722948
ROMs
http://forum.xda-developers.com/galaxy-tab-3/general/tab-3-7-0-sm-t210-r-stock-4-4-2-kitkat-t2930075
CAUTION: Anything could result in bricking the device. Any attempt without any confirmed information is acceptance of the fact that the device may become completely unusable.
Please be willing to lose functionality of the device if you proceed.
There do seem to be Odin flashables for the 4.1 software, which should be able to recover the device, but I would obtain one of those first.
If you proceed, please keep us updated so that other users out there can find this information
Click to expand...
Click to collapse
Ok thanks, i'll try and report it; if Odin fails, is rhere a flashable zip file of stock rooted 4.4.2 so i can try to flash in recovery?

code72 said:
Ok thanks, i'll try and report it; if Odin fails, is rhere a flashable zip file of stock rooted 4.4.2 so i can try to flash in recovery?
Click to expand...
Click to collapse
You can try The Nolekat Rom. It is fest Best Customrom for our Tab.

Sooooo.....
Did it work? Im curious as I got the T2105 tab for my kid and the darn thing is really slow for running Spider- Man Unlimited and some other apps
I want to put Cyanogenmod on it or some other rom with less crap

Ive been after the answer to this as well. I have the 2105 myself, and have TWRP installed and root, but not one single custom rom has worked. They just bootloop. Then you have to ODIN the stock rom. I have the original rom from sammobile, but they only have the factory 4.1.2 roms. Im wondering if a stock rom from the 210r or another Tab3 wifi rom would work.
It seems almost every tab3 from around the globe has been updated to 4.4.2 except this one...ive been checking sammobile everyday, but still no update for the 2105...

juggalofr33k said:
Ive been after the answer to this as well. I have the 2105 myself, and have TWRP installed and root, but not one single custom rom has worked. They just bootloop. Then you have to ODIN the stock rom. I have the original rom from sammobile, but they only have the factory 4.1.2 roms. Im wondering if a stock rom from the 210r or another Tab3 wifi rom would work.
It seems almost every tab3 from around the globe has been updated to 4.4.2 except this one...ive been checking sammobile everyday, but still no update for the 2105...
Click to expand...
Click to collapse
Your Bootloop prob is like the same as we have on The other device.
Flash a recovery with The Kitkat KK extension.

Well, actually its not a bootloop...it just reboots to recovery. Ill give a KK recovery a shot. any suggestions on which one would be the best? Or the recovery most likely to work? CWM or TWRP? Anything to get this off JB and onto KitKat...lol.. Apprecitae your help!

juggalofr33k said:
Well, actually its not a bootloop...it just reboots to recovery. Ill give a KK recovery a shot. any suggestions on which one would be the best? Or the recovery most likely to work? CWM or TWRP? Anything to get this off JB and onto KitKat...lol.. Apprecitae your help!
Click to expand...
Click to collapse
Yes, thats bootloop into recovery.
I prefere CWM or PhilzTouch on all my device.

Right on. Ill give those recoveries a shot. I have used CWM in the past (HTC Aria), but ive been using TWRP since i got the Galaxy Nexus. Ill give them both a try and report back in a few days... My internet connection sucks ass, so it takes hours to download a rom...

code72 said:
Hi, i bought a Galaxy Tab 3 7" Disney Edition but i don't care about kids stuffs, is it possible to flash it with latest T210 (ITV) firmware 4.4.2 with Odin?
My model is T2105 (ITV) and is still at 4.1.2
Thanks
Click to expand...
Click to collapse
Its amazing that everyone is posting when they have question but no one cares to post their findings. I (also an owner of Galaxy Tab3 Kids T2105 bought in Australia) was fed up with the old and slow firmware. So, I decided to go ahead and flash a new firmware (T210XXBNI1 4.4.2 UK upgrade for SM-T210). First I tried to upgrade with Odin 3.9 but the process would fail after "Nand Write Start". Then I tried it with Odin ver. 3.07 and the process went smoothly and now I am a proud owner of Samsung Galaxy Tab3 with 4.4.2 Kitkat. It does feel a little bit swifter than the Jellybean. Anyways, so far so good. Will post if encountered any problem !

thethakuri said:
Its amazing that everyone is posting when they have question but no one cares to post their findings. I (also an owner of Galaxy Tab3 Kids T2105 bought in Australia) was fed up with the old and slow firmware. So, I decided to go ahead and flash a new firmware (T210XXBNI1 4.4.2 UK upgrade for SM-T210). First I tried to upgrade with Odin 3.9 but the process would fail after "Nand Write Start". Then I tried it with Odin ver. 3.07 and the process went smoothly and now I am a proud owner of Samsung Galaxy Tab3 with 4.4.2 Kitkat. It does feel a little bit swifter than the Jellybean. Anyways, so far so good. Will post if encountered any problem !
Click to expand...
Click to collapse
thanks for report thethakuri... i tried to do this too, but for me it doesnt work ... after i installed the 4.4.2, i had a black screen on boot and my tablet dont charge offline... so, i turned to 4.1.2... can you give me any sugesttion?

Update from me: Just upgraded my US SM-T2105 Kids tablet to the UK KK version as well (T210XXBOA3_T210BTUBOA2_Home.tar.md5). Did not work with Odin 3.11 but worked with 3.07 as mentioned above.

The Tab3 Kids is so far holding up very well with the 4.4.2 Firmware. Much more responsive.
Only issue I have is that it switches on when charging and the screen is not very responsive afterwards. A reboot fixes that.
I came across a post somewhere that there is a new bootloader required to fix that but I can't find the post anymore . If someone has that link please post it here. Thanks !

idefix_sin said:
The Tab3 Kids is so far holding up very well with the 4.4.2 Firmware. Much more responsive.
Only issue I have is that it switches on when charging and the screen is not very responsive afterwards. A reboot fixes that.
I came across a post somewhere that there is a new bootloader required to fix that but I can't find the post anymore . If someone has that link please post it here. Thanks !
Click to expand...
Click to collapse
Did you ever find a fix for the screen issue? I'm going to give this a shot this weekend my daughter really wants pokemon go on her tablet!

Unfortunately I could not find it anymore.
Using ours now just with the new firmware and make it a conscious effort to switch it off after charging it. So far works fine.

idefix_sin said:
Unfortunately I could not find it anymore.
Using ours now just with the new firmware and make it a conscious effort to switch it off after charging it. So far works fine.
Click to expand...
Click to collapse
thanks.. by the way did use a recovery? or just flash T210XXBOA3_T210BTUBOA2_Home.tar.md5 with oden?

Hi.
Will update to 4.4.2 would enable the move app to sd card?
Thank you.

any solution to remove kids feature

Root the device and uninstall using root uninstaller.

Need help Installing CWM on i747

Its been awhile since I've done my firmware, but I'm giving my phone over to my sister soon and upgrading to a Note Edge.
I'm trying to get this phone on Likewise S5, but having a little difficulties with the older guilds to install various stuff, also all the warning on the Likewise S5 don't show up in the guide I was following for the actual installation, like stuff about bootloaders and modems (I don't know what these are), I am a techy just I'm not well versed in Cellphone Firmware talk at all, more of a PC person.
This was the guide I'm following well can't link it, its on Team android, for the likewise S5 for S3 i747
I'm Trying to install CWM Because I believe I don't have one currently installed, if I do is there a way I can find out? all I believe I have is just a oem 4.1.2 firmware that was rooted.
Almost all the CWM guides that are out have their own downloads that no longer work for the CWM that they provide, and honestly I don't wanna mess with it anymore and want to get the proper combination, I've downloaded the latest one for Samsung Galaxy S3 from the Official Clockwork mod website for Touch version, but I'm not sure how to flash "that" I know it says to use PDA on 1.85 Odin which i've tried but it just says
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<OSM> All threads completed. (succeed 0 / failed 1) (No pass or fail)
I'm not sure what I'm doing at this point and could really use some help, specific to what I'm doing.
And to be specific I have a Samsung Galaxy S3 i747 From Rogers Wireless in Canada (Sept 2012), and it isn't bricked have booted it up just fine.
Currently I am dealing with a finnicky USB port as well, need to get some alchohol and see if I can get a more reliable connection out of it. I got it to point now I feel like I'm comfortable flashing it just eh, could be better, long as its sitting generally its connected slight pressure in cord to be sure, usually charges no problem but USB connectivity is whats finnicky. I cleaned out the lint with a needle didn't really seem to help a whole lot but definetly lets the plug go in further now, even bought a new cord that gets a decent click but it still a little floppy side to side, feels like its the plug has room to move inside the female end of the plug, vs anything being "loose"

Any chance your phone is already rooted? Odin flashing anything with a flaky USB port would make me a little nervous.
If you're rooted, there's an app called flashify that makes updating recovery pretty simple and there is no USB connection needed.
Also in the Play store if you search for Samsung Phone Info you should find an app that will tell you what firmware you're on. Install it and report back what it tells you you're on for bootloader and baseband and someone here should be able to chime in on whether it will run newer roms ok, or how to proceed if its out of date.

jason2678 said:
Any chance your phone is already rooted? Odin flashing anything with a flaky USB port would make me a little nervous.
If you're rooted, there's an app called flashify that makes updating recovery pretty simple and there is no USB connection needed.
Also in the Play store if you search for Samsung Phone Info you should find an app that will tell you what firmware you're on. Install it and report back what it tells you you're on for bootloader and baseband and someone here should be able to chime in on whether it will run newer roms ok, or how to proceed if its out of date.
Click to expand...
Click to collapse
I am already rooted I know that I did the root myself, to get Super admin permissions for the Ps3 controller blutooth controller permissions.
I'll look into Flashify, I'll install phone info now

Ok here is from my Samsung phone info app;

DMF1 firmware is pretty out of date. Unless you pick an older build of a custom rom, you'll run into some issues.
The full Canadian carrier updates for i747m are all available for download from sammobile.com, but those will be really big files to flash with Odin. I wouldn't try that unless you're really confident in that USB port. This won't be a really quick flash and interrupting it could brick your phone.
The safest route might be to unroot the phone and take carrier OTAs until your firmware is up to date. You'll have to be on stock recovery for OTAs. Once you're unrooted if you power down and reboot your phone, I'm pretty sure the stock recovery will come back. If not, here's a link to a stock recovery: http://forum.xda-developers.com/showthread.php?t=2026751
To get going with rooting and custom roms again you'll have to flash a custom recovery in Odin once you get up to date on OTAs, but that will be a 5 - 10 MB file to flash as opposed to a 1 GB+ full system update. Don't worry about that until you get the bootloader and modem up to date, one step at a time. :good:

How do I perform an update though to manually update the phone, like to unroot it basically I'm Connecting it to USB getting it to recognize in Kies?
Like I have full USB access to my phone now, yes the port is flaky but it functions. Kies says my device is on latest firmware even though I know 4.4.2 was released by rogers for the device, i.e I don't understand how to unroot it and bring it up to date
I don't know what a OTA is, I don't understand what a modem/bootloader is etc.
I'm assuming what I have to do is update it to 4.4.2 via the normal firmware but currently it isn't giving me an option to

OTA is "over the air" updates. They are pushed to your phone and often update your phone's bootloader, modem, and rom to new versions. They'll download and install with wifi or cell data, no USB connection required. It is a very safe way to update your phone, but OTA updates will fail if you are rooted and have custom recovery (at least AT&T's will).
With android 4.1 and DMF1 firmware you're something like 2 or 3 updates out of date. Usually OTA notifications just pop up on their own, or you might have a "check for updates" option somewhere in your rom settings. Has this phone been off the grid for a while, update process frozen, or just declining OTAs for the last year and a half or so? Is it not tied to a carrier anymore?
I have updated bootloaders and modems outside of the OTA process, but only on the i747 AT&T variant. If OTA is not an option for some reason, I can't comment on what your safest route would be on the Canadian variant, but there are plenty of expert i747M users on here. Someone will chime in to help you out.
If OTA is an option, then the easiest way to unroot used to be to install SuperSU from the Play store, if you're not already using it. In SuperSU settings there used to be a "full unroot" option.

Ok So what do I need to do exactly I unrooted the phone no problem but it still doesn't recognize it as needing new firmware still so I'm still confused how to update it.
My understanding is I need to update this to latest base version which would be 4.4.2, but I'm not sure how to do that exactly since its not automatically doing it given the custom rom.

Confirm the bootloader on your phone and post it here.
It is the bootloader that will determine which stock firmware to flash from sammobile.com onto your i747m.

audit13 said:
Confirm the bootloader on your phone and post it here.
It is the bootloader that will determine which stock firmware to flash from sammobile.com onto your i747m.
Click to expand...
Click to collapse
Again, I'm not well versed in android terminology etc, I don't really know what a bootloader is, everything in those screen caps above is what I'm using

If you want to be on the latest stock, just use Odin to flash the stock Rogers 4.1.1 ROM from sammobile.com. Then use OTA updates to update the phone to the latest KK.

audit13 said:
If you want to be on the latest stock, just use Odin to flash the stock Rogers 4.1.1 ROM from sammobile.com. Then use OTA updates to update the phone to the latest KK.
Click to expand...
Click to collapse
Again, I Really Need more details Odin isn't so simple that its Oh Slot dis dat flash in der and poof completeo, if you read through the thread you'd you I have a flaky USB port that isn't 100% stable, flashing a 1gb rom through a iffy connection doesn't sound smart.
How do I flash this correctly from SD card if I can?
Please describe, Which App I need for it, what I need to do in app etc, cuz Odin is like AD AP DS WE aslaksd its all gibberish to me unforunately for different flashing locations

I know of no way to flash a completely stock ROM from an SD card.
If you wanted to flash it from an SD card, you would probably need to download the entire ROM, strip out the stock recovery, and re-pack the ROM into a zip file.

I'm still extremely confused, I need consise directions what I need to do, so far I haven't had solid details in this thread yet how to get my firmware installed :crying:

Evockzi said:
I'm still extremely confused, I need consise directions what I need to do, so far I haven't had solid details in this thread yet how to get my firmware installed :crying:
Click to expand...
Click to collapse
since youre computer literate , so to speak , perhaps this method would help/be more 'simple'. IDK , just a thought.
http://forum.xda-developers.com/showthread.php?t=2225405
"all i can really do , is stay out of my own way and let the will of heaven be done"

Is that method compatible with my device? before I've only been following ones that flash with odin.
The Reason why the isn't helpful immediately for me, I Do Not Know what I need to Do to achieve what I need.
Bootloader means almost nothing to me, I do Not know what I need to accomplish, No one has answered that question yet for me.
My Question is again, So, Do I need to install 4.4.2 Base as downloaded from that Samsmobile, and How Do I install Specifically that?
Beyond That my question expands into, Ok After I install that What do I need to do to install likewise.
I Do not know what I need to do so all these guides about doing specific tasks that you know what you need to do are useless to me at this moment I'm afraid.
I have enough of a stable USB connection I can Odin it Right now I just need to know what to select, etc

I yolo'd it with the connection, and flashed it with older odin 1.85 since I know PDA is the correct one idk what the hell it is in the new odin.
Passed, took almost 8 mintues to flash it, Now I just need to get back to original question of installing CWM Recovery and Getting Likewise S5 rom installed.
Do I have correct 4.3-4.4 Modem and boot loader that it spams in bright red on the likewise requirements?

Managed to finish all the installations without a hitch,
Followed a guide to CWM install and then root it through installing SuperSU, Then had everything to install Likewise which can be done on the device.
Everything installed perfect now I have a S5 to give to my sister cheers

@Evockzi glad you got it figured out.:victory:
"all i can really do , is stay out of my own way and let the will of heaven be done"

Motherboard changed, but various features not working

My phone was working fine and suddenly one day it got stuck on booting screen, then i have tried everything including flashing Rom, but all in vain, finally i ordered a new motherboard from aliexpress.com, the phone got started but everything is in Chinese language, play store was not there and even it is not working when installed from other sources, even whatsapp not working and i am not able to install without google play store. Earlier version installed in the new chinese motherboard was android 4.1.2 and it was asking for software update , when i have updated its software to 4.3 , baseband version N7100ZCUEB1 AND KERNEL VERSION 3.2.31-2859655, BUILD NUMBER JSS15J.N7100CUEOK1.,due to chinese version i am not able to use whatsapp or playstore.After updating the phone, i am not able to make a call and it shows the error "not registered on network" even the apps installed by me are not working, kindly advice what to do, should i use any other version or anything else.This is a chinese motherboard and i want change its software to indian version, what should i do?

Boot into download mode to confirm the model #. If it is a Note 2 made for the Chinese market, the Play store may not function on the phone.

audit13 said:
Boot into download mode to confirm the model #. If it is a Note 2 made for the Chinese market, the Play store may not function on the phone.[/QUOTE
its version is GT-N7100_CHN_CHINEXYNOS4412, can i flash any other ROM in this motherboard?
Click to expand...
Click to collapse

Hmm, looks like it might be the China version of the Note 2 which has limited features. Search XDA for the Note 2 China version and you'll see that many people have problems with flashing ROMs.
Can you send it back and get the international version of the motherboard?

audit13 said:
Hmm, looks like it might be the China version of the Note 2 which has limited features. Search XDA for the Note 2 China version and you'll see that many people have problems with flashing ROMs.
Can you send it back and get the international version of the motherboard?
Click to expand...
Click to collapse
It may be international version because it is shipped for India, is it possible to flash any other ROM and if yes pls guide me how to do, coz i have never done this before. Thanks in advance

If the phone was the international version, it should say "GT-N7100" in Odin mode. See the picture from post number 1: http://forum.xda-developers.com/showthread.php?t=2618261

There's nothing wrong. You need to write the IMEI to the phone memory. By the way you didn't need to buy the entire motherboard. Only the phone memory (16gb eMMC) was corrupt. Samsung produced faulty emmc in the early S3 and Note 2 models (google and you'll see). Mine had same problem I took it to repair shop and they replaced the emmc and wrote the IMEI. Charged me around $40 in local currency. Just tell them you have corrupt IMEI and they'll do it for very little amount of money. After you do that, flash TWRP custom recovery and take back up of your EFS and Modem folder (the IMEI is located here). Then you can upgrade to 4.4.2 and restore EFS and Modem from TWRP.

I don't think it is corrupt or defective chip since 4.3 successfully installed on the phone.

i have changed the CSC code from CHN to INU, after then when i went to recovery mode it shows INU in place of CHN, but i was not able to flash indian ROM in that via odin 3.09, it shows the message "nand write start : failed" and finally failed.
When tried with ODIN 3.07 it shows the error, serial port is not communicating , while USB debugging is allowed in my phone.In recov ery mode it shows the phone detail GT-N7100_CHN_CHINEXYNOS4412 and downside it shows CSC code INU, could any one suggest which ROM to FLASH and how?
CWM recovery is already flashed in it and it is already rooted.
I tried to flash offical 4.4.2 ROM indian version and failed , could anybody pls suggest anything else.

I know of no way to flash a non-Chinese ROM to this phone. I have seen people try to get a ROM onto a Chinese phone. When they do get the ROM installed, The Play store will not run.
The CSC is simply a carrier customization. The problem is the bootloader which prevent the installation of non-authorized ROMs.

audit13 said:
I know of no way to flash a non-Chinese ROM to this phone. I have seen people try to get a ROM onto a Chinese phone. When they do get the ROM installed, The Play store will not run.
The CSC is simply a carrier customization. The problem is the bootloader which prevent the installation of non-authorized ROMs.
Click to expand...
Click to collapse
This ROM is not official, it is a custom ROM as seen in recovery mode.

Based on your first post, the phone looks to be running official 4.3 Chinese rom: http://www.sammobile.com/firmwares/database/GT-N7100/CHN/
All Samsung phones made for mainland China have very tight restrictions on the rom, bootloader, and apps.

audit13 said:
I don't think it is corrupt or defective chip since 4.3 successfully installed on the phone.
Click to expand...
Click to collapse
i think you misunderstood my post...I said his PREVIOUS emmc was faulty. Now that he bought and entirely new motherboard( which has the emmc) he everything is fine. He just needs to write the IMEI to connect to network (not registered on network error).
---------- Post added at 01:24 AM ---------- Previous post was at 01:22 AM ----------
Hey if you can't flash other ROMs from odin..
take it to repair shop, they have 3rd party hardware flashing tools, they'll flash the latest 4.4.2 international rom.

I'm not sure if it's possible to flash an international ROM on the phone. Also, the phone may not have the necessary hardware to support the carrier's radio frequencies. If the phone shows the correct imei, not being able to connect to a cell carrier could be a hardware limitation.

audit13 said:
I'm not sure if it's possible to flash an international ROM on the phone. Also, the phone may not have the necessary hardware to support the carrier's radio frequencies. If the phone shows the correct imei, not being able to connect to a cell carrier could be a hardware limitation.
Click to expand...
Click to collapse
before up-gradation of this new chinese rom , network was working fine , so it must be enabled for the frequency range.

The phone may have been running a custom ROM or a hack to allow the phone to work with your carrier? I'm not sure but it does sound like the motherboard is made for mainland China.