broken screen. i need your helo - Xiaomi Mi Max Questions & Answers

Hey guys my screen is broken, but the touch screen is not, but some guys told me to buy the touch screen too. If someone here got broke his mi max and he replace the screen please I would like to know which screen he bought... I heard a lot of things about the colours. That the market screens are not original and the colours are very weak. So PLEASE.. I need you IMMEDIATELY

In generally...
Firs of all check with Aida64 which panel is used as their is more than one used in Mi Max. Usually it is Tianma R63350 & all do Tianma have a very good distribution network across the EU you won't find any references for this particular display. Second part should be to check if it's just touch panel/protective glass broken or you need a complete set (touch, glass, LCD).
Digitizer/glass will cost you 8.30$
https://www.parts4repair.com/touch-screen-digitizer-for-xiaomi-mi-max-white/
Complete pack with LCD/Digitizer and glass will cost you 35~36$ (tip don't pay more for it).
https://www.parts4repair.com/complete-screen-assembly-for-xiaomi-mi-max-white/
Warning; before purchasing the set be certain to see & confirm (from seller side) how its a same LCD display!
For additional info, finding possible better deal, replacement guides and cetera just search in browser for "xiaomi mi max display replacement".
My personal advice is that when you purchase the part's gave them for replacing to skilled professional in mobile services repair shop close to you & naturally try to bargain about the price.
Best regards.

I just bought whatever was cheapest on eBay. I haven't noticed any issues with the screen but the three buttons below the screen are no longer evenly lit, it used to bother me but now I don't even notice.
I have never replaced the touchscreen and screen separately, but when trying to replace my screen I definitely broke both so I would recommend buying both parts. Try to get the glue for the screen too! I had to use some super glue so I am pretty sure I can never replace it again.

Zola III said:
In generally...
Firs of all check with Aida64 which panel is used as their is more than one used in Mi Max. Usually it is Tianma R63350 & all do Tianma have a very good distribution network across the EU you won't find any references for this particular display. Second part should be to check if it's just touch panel/protective glass broken or you need a complete set (touch, glass, LCD).
Digitizer/glass will cost you 8.30$
https://www.parts4repair.com/touch-screen-digitizer-for-xiaomi-mi-max-white/
Complete pack with LCD/Digitizer and glass will cost you 35~36$ (tip don't pay more for it).
https://www.parts4repair.com/complete-screen-assembly-for-xiaomi-mi-max-white/
Warning; before purchasing the set be certain to see & confirm (from seller side) how its a same LCD display!
For additional info, finding possible better deal, replacement guides and cetera just search in browser for "xiaomi mi max display replacement".
My personal advice is that when you purchase the part's gave them for replacing to skilled professional in mobile services repair shop close to you & naturally try to bargain about the price.
Best regards.
Click to expand...
Click to collapse
Mine is auo r61322, I can't find it and buy it...

eikiel said:
I just bought whatever was cheapest on eBay. I haven't noticed any issues with the screen but the three buttons below the screen are no longer evenly lit, it used to bother me but now I don't even notice.
I have never replaced the touchscreen and screen separately, but when trying to replace my screen I definitely broke both so I would recommend buying both parts. Try to get the glue for the screen too! I had to use some super glue so I am pretty sure I can never replace it again.
Click to expand...
Click to collapse
Which screen did you bought? Send me a link please

StonebridgeGr said:
Mine is auo r61322, I can't find it and buy it...
Click to expand...
Click to collapse
Well they do have it enlisted but didn't provide any additional information about it:
http://auo.com/?sn=149&lang=en-US&c=34&n=292
Don't really know what else to say to you...

Zola III said:
Well they do have it enlisted but didn't provide any additional information about it:
http://auo.com/?sn=149&lang=en-US&c=34&n=292
Don't really know what else to say to you...
Click to expand...
Click to collapse
I don't think that someone can buy from there :/ this is bad :/

StonebridgeGr said:
Which screen did you bought? Send me a link please
Click to expand...
Click to collapse
This is the same seller but I can't promise its the same screen. It also does not come with the screen glue though :/
http://www.ebay.com/itm/US-OEM-LCD-...090614?hash=item5b2e140fb6:g:oWAAAOSw4GVYHP3O

eikiel said:
This is the same seller but I can't promise its the same screen. It also does not come with the screen glue though :/
http://www.ebay.com/itm/US-OEM-LCD-...090614?hash=item5b2e140fb6:g:oWAAAOSw4GVYHP3O
Click to expand...
Click to collapse
Dude this is a OEM screen, I am very sure that the colours won't be the same as the original's.. I bought from dragon-tt.Com about 77 euros almost... Screen and touch, and frame-back panel

Related

N7000 Replenishment Screen

Hello guys,
10 minutes ago my galaxy note N7000 screen cracked in my pocket.
So I need to buy a replenishment screen from Samsung but I simply can't find stores that supplies replenishment parts for it. Do anyone knows where to buy a new Amoled LCD screen for galaxy note ?
Thank you and best regards,
Amid
ebay, took 5 days to ship from HK to NYC. Follow youtube guide in opening the note and use blow dryer/heat gun to loosen the sceen, wedge open with something sharp and slowly tear back the screen gently. You will need the old Wacom sensor from the broken screen so becareful to not to rip it. There is guide in the general section. I broke mine 2 weeks ago and replaced it in a hour. take your time you can get it done.
Thanks man. Just to be sure, the price is about US$ 230,00 for it ? i am not sure if I am looking for the right spare part.
amidsal said:
Thanks man. Just to be sure, the price is about US$ 230,00 for it ? i am not sure if I am looking for the right spare part.
Click to expand...
Click to collapse
I think this is what you are looking for:
http://www.ebay.com/itm/S-Black-Dig...087?pt=LH_DefaultDomain_0&hash=item2c65951cd7
I can try but I don´t think this will help the problem. The screen doesn´t show any images anymore, looks like a broken LCD. When you press it, a lot colors appears around it. Do you believe this is the one I need ?
Thank you and best regards
amidsal said:
I can try but I don´t think this will help the problem. The screen doesn´t show any images anymore, looks like a broken LCD. When you press it, a lot colors appears around it. Do you believe this is the one I need ?
Thank you and best regards
Click to expand...
Click to collapse
Hmmm no, in that case you will need the 200ish one.
You will need the entire setup, glass, LCD, and Touch. Does not come with Wacom sensor. Looking around you can get them for 230-260. Look for delivery, that makes a huge difference, especially with your phone out of commission.
This is the guy I purchased mine from, but I panic and purchase the first one I saw. If you do some research you will find cheaper, but I got min in 5 days. So I am glad this guy came thru. Good luck, its going to stress you out a bit when you have to remove the screen from the front panel, they are glued on so take your time. Looks like your LCD broke so it is going to crack and shatter further so make sure you do it in area where it is easy to clean. If you look at the front panel after you remove it, you will see one wire that does not come with the replacement one, that is for the wacom sensor, so be careful and don't damage that part, you will need to peel it off and place it back on to the replacement lcd, otherwise your s-pen won't work. It's been 2 weeks, my phone is going strong and no sensor or sceen issues. You should get a more protective case, since you probably already blew close to ~$1000 on this phone by now. I have a casemate, otterbox commuter looks like a good one. Once again good luck, you can do this.
Please stop advising people to do something that is not meant to be done and can possibly damage their phone even more. And most likely look completely rubbish when assembled.
The correct repair part is a complete display assembly including everything - the glass, digitizer, Wacom digitizer, AMOLED, bezel, frame abd home button. It costs around 260 dollars on eBay and is relatively simple to install. By installing the complete assembly you don't need to worry about separating the glass and AMOLED or about the Wacom digitizer, since they are all included. Just remove the screws, back housing and motherboard, disassemble the audio flex cable and front camera flex from the old display and put them into the new one. Most displays also require the old charger port flex and speaker module to be used.
The correct part looks like this, for example: http://pages.ebay.com/link/?nav=item.view&id=320843198847
Well mine looks brand new, must be the workmanship ;-P But why flame my advise when he is going to need to do it anyways, the screen is completely useless, as was mine. Why don't you keep your assumption to yourself in how it will look or if he is going to ruin the device. If he decides that he would rather live with a crack screen or someone who is willing to do it, there really isn't much options here. What's up with such negative attitude here. Just trying to show him that it can be done.
---------- Post added at 04:30 PM ---------- Previous post was at 04:26 PM ----------
jusutus said:
The correct part looks like this, for example: http://pages.ebay.com/link/?nav=item.view&id=320843198847
Click to expand...
Click to collapse
Look at the delivery time. I got mine in 5 days. just talked to the seller.
Replacement screen with 2 connectors
Hello!
First of all I would like to say Thank you for all the resources provided in this forums!
Could someone please help me to find a replacement screen for the International version of the Galaxy Note GT-N7000 with 2 connectors? This phone has the physical home button. All the replacements that I've been able to find have just the first connector. I tried to post a photo hoping to help better explain it, but I can't do it yet.
Thank you in advance for your cooperation!
Leo.F said:
Hello!
First of all I would like to say Thank you for all the resources provided in this forums!
Could someone please help me to find a replacement screen for the International version of the Galaxy Note GT-N7000 with 2 connectors? This phone has the physical home button. All the replacements that I've been able to find have just the first connector. I tried to post a photo hoping to help better explain it, but I can't do it yet.
Thank you in advance for your cooperation!
Click to expand...
Click to collapse
Hello, I have got repaired my GN in Samsung service (Slovakia) for 165 €. I have had the same problem. I think, that should be the best way.
s.magus said:
Hello, I have got repaired my GN in Samsung service (Slovakia) for 165 €. I have had the same problem. I think, that should be the best way.
Click to expand...
Click to collapse
Thank you s.magus! I would love to go that route, but I'm in Venezuela, and Samsung is selling the GN, but does not yet have replacement parts. You're right, that will be the best way.
n7000 replenishment screen
hello jignesh here .... i hav note gt n7000 ... it working 100% normally ... just cracked screen or glass or lcd ... i dont know what is problem .... can u tell me what is the problem .... glass cracked or screen cracked or lcd cracked ???? how can i find problem ???? touch and everything is working perfectly as like new note .... i already using note since 1month ... but now i want to repair it ... so what can i do ??? just change the front glass or change lcd ??? please reply me ....
Where is the cheapest part in uk?
is there anyone in India who could tell the price of galaxy note's white screen touch (not the lcd screen).Thanks in advance....:good:
I can recommend this site, they send working usb module
http://www.parts4repair.com/.
They have other parts also
Sent from my GT-N7000 using Tapatalk 2
baz77 said:
I can recommend this site, they send working usb module
http://www.parts4repair.com/.
They have other parts also
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
SUPER NICE !!!!
After a search for 5 days ... This one is the best !!!
THNX baz77
your welcome, hope you fix yer stuff and be carefull electronics is delicate stuff
Sent from my GT-N7000 using Tapatalk 2
i disagree
Hi ,
I think Senior member Justis is right... many of us dont want to do a full screen replacement for 220$...when we can just remove the front screen for 20$..many have done this method successfully... U just need to watch a lot of youtube videos on this and be careful/delicate with the procedure... its possible.
So i dont think what he said was a waste.. Pls keep such remarks to yourself.. He was not wasting anyones time.
Infact you are wasting my time making me read your message and give u a reply.
You know what...im doing a screen replacement too... thats what guys do first. njot jump in and do a full replacement for 220 $.:good::good::good:
jusutus said:
Please stop advising people to do something that is not meant to be done and can possibly damage their phone even more. And most likely look completely rubbish when assembled.
The correct repair part is a complete display assembly including everything - the glass, digitizer, Wacom digitizer, AMOLED, bezel, frame abd home button. It costs around 260 dollars on eBay and is relatively simple to install. By installing the complete assembly you don't need to worry about separating the glass and AMOLED or about the Wacom digitizer, since they are all included. Just remove the screws, back housing and motherboard, disassemble the audio flex cable and front camera flex from the old display and put them into the new one. Most displays also require the old charger port flex and speaker module to be used.
Click to expand...
Click to collapse

Cracked Screen? Repairing the Samsung Galaxy TabPro 8.4 LTE (SM-T325)

Hey guys, I bought the Samsung Galaxy TabPro 8.4 LTE variant (SM-T325) and unfortunately, just after 2 weeks of use, my friend dropped it and cracked the screen and scratched the bezels. I live in the UK and I bought this tab online. I know dropping the tab is out of warranty and I have to pay for the damages but I have contacted Samsung which they referred me to some of their repair centres but with no hope as they couldn't replace/repair the damage because my tab is the LTE variant and it's not of European Region.
I'm pretty pissed that my beautiful TabPro 8.4 is cracked and I'd do anything to fix it.
I just want to ask you guys for advice on how I should fix my tab if official samsung repair centres here can't do it because they don't have the parts? Or is my best bet taking it to a repair centre in Asia (where it's most likely from)?
Thank you if anyone replies ;_;
Not good when you crack your screen
The only and best advice i can give you is check Ebay, look up LCD & Digitizer for Galaxy Tab Pro 8.4 LTE, you should find it there. The best of luck Buddy..
Zakanam said:
Hey guys, I bought the Samsung Galaxy TabPro 8.4 LTE variant (SM-T325) and unfortunately, just after 2 weeks of use, my friend dropped it and cracked the screen and scratched the bezels. I live in the UK and I bought this tab online. I know dropping the tab is out of warranty and I have to pay for the damages but I have contacted Samsung which they referred me to some of their repair centres but with no hope as they couldn't replace/repair the damage because my tab is the LTE variant and it's not of European Region.
I'm pretty pissed that my beautiful TabPro 8.4 is cracked and I'd do anything to fix it.
I just want to ask you guys for advice on how I should fix my tab if official samsung repair centres here can't do it because they don't have the parts? Or is my best bet taking it to a repair centre in Asia (where it's most likely from)?
Thank you if anyone replies ;_;
Click to expand...
Click to collapse
Zakanam said:
Hey guys, I bought the Samsung Galaxy TabPro 8.4 LTE variant (SM-T325) and unfortunately, just after 2 weeks of use, my friend dropped it and cracked the screen and scratched the bezels. I live in the UK and I bought this tab online. I know dropping the tab is out of warranty and I have to pay for the damages but I have contacted Samsung which they referred me to some of their repair centres but with no hope as they couldn't replace/repair the damage because my tab is the LTE variant and it's not of European Region.
I'm pretty pissed that my beautiful TabPro 8.4 is cracked and I'd do anything to fix it.
I just want to ask you guys for advice on how I should fix my tab if official samsung repair centres here can't do it because they don't have the parts? Or is my best bet taking it to a repair centre in Asia (where it's most likely from)?
Thank you if anyone replies ;_;
Click to expand...
Click to collapse
I hate that it happened to u too but if all u did was crack the digitizer glass then consider yourself lucky because that part can be found all over the internet for as low as $40 (i'll link to a site below but as the user above said they are also on ebay...although for a higher price)...how about I also have the lte version BUT I broke the actual lcd display and somehow managed NOT to shatter the glass (weird but true). The crazy thing is I didn't even drop it...just picked it up and it was cracked/bleeding inside...not even sure if its something I did & not looking forward to arguing with Samsung about it either not to even mention the fact that's its actually a hong kong unit. The ironic part is I actually fix these things for a living but I cant find the screen anywhere online yet...if u decide to get rid of it for whatever reason then I would be willing to purchase the lcd from u (assuming u didn't break both screens) for a reasonable price & in order to help u make your money back. I could also part it out & put it on ebay for u...the motherboard alone should get a pretty penny
http://www.parts4repair.com/touch-screen-digitizer-for-samsung-galaxy-tab-pro-8-4-t320-t325-t321-black/?ref=lexity&_vs=google&_vm=productsearch&gclid=CK-_8fLzhL4CFe5aMgodskEASQ
^cheapest link I found (I cant vouch for the credibility of the sute bit as I stated above the part can be found at mor popular places as well)
THEDEVIOUS1 said:
I hate that it happened to u too but if all u did was crack the digitizer glass then consider yourself lucky because that part can be found all over the internet for as low as $40 (i'll link to a site below but as the user above said they are also on ebay...although for a higher price)...how about I also have the lte version BUT I broke the actual lcd display and somehow managed NOT to shatter the glass (weird but true). The crazy thing is I didn't even drop it...just picked it up and it was cracked/bleeding inside...not even sure if its something I did & not looking forward to arguing with Samsung about it either not to even mention the fact that's its actually a hong kong unit. The ironic part is I actually fix these things for a living but I cant find the screen anywhere online yet...if u decide to get rid of it for whatever reason then I would be willing to purchase the lcd from u (assuming u didn't break both screens) for a reasonable price & in order to help u make your money back. I could also part it out & put it on ebay for u...the motherboard alone should get a pretty penny
http://www.parts4repair.com/touch-screen-digitizer-for-samsung-galaxy-tab-pro-8-4-t320-t325-t321-black/?ref=lexity&_vs=google&_vm=productsearch&gclid=CK-_8fLzhL4CFe5aMgodskEASQ
^cheapest link I found (I cant vouch for the credibility of the sute bit as I stated above the part can be found at mor popular places as well)
Click to expand...
Click to collapse
LowaEastSide said:
The only and best advice i can give you is check Ebay, look up LCD & Digitizer for Galaxy Tab Pro 8.4 LTE, you should find it there. The best of luck Buddy..
Click to expand...
Click to collapse
Thanks guys for replying, I totally appreciate it but yeah, my LCD itself isn't broken, just the glass so the touch screen digitizer is what I need. However, if I buy from eBay or from the given link, will the glass be of the same quality/made from the same thing? Cause the touch screen glass on the TabPro 8.4 feels so smooth and not cheap so I don't really wanna change that :/
And also, do you guys now if they sell the bezels? since they scratched too
Thanks again!
Wow.
Im sorry to read the situation the both of you are in, as for the first post i replied to i did mention the LCD & Digitizer, however doing the research on Ebay the Digitizer Cant be found, that really sucks, just makes me MUCH MORE aware of NOT dropping my device, they do feel really light a delicate, with that said I love watching movies on it in 1080p, the clarity is unbelievable. I'm loving this device, But on the other hand there isn't any development for it out, really sucks cause i was looking to switch it to the Google Addition of Android.. Or if a developer can cook up a Custom Rom from the S5 Operating System that would be SICKKK... That how i have my Note 3 running, exactly like the S5, its hottt... the best of Luck to you both, hope it works out. BLESS..!!
THEDEVIOUS1 said:
I hate that it happened to u too but if all u did was crack the digitizer glass then consider yourself lucky because that part can be found all over the internet for as low as $40 (i'll link to a site below but as the user above said they are also on ebay...although for a higher price)...how about I also have the lte version BUT I broke the actual lcd display and somehow managed NOT to shatter the glass (weird but true). The crazy thing is I didn't even drop it...just picked it up and it was cracked/bleeding inside...not even sure if its something I did & not looking forward to arguing with Samsung about it either not to even mention the fact that's its actually a hong kong unit. The ironic part is I actually fix these things for a living but I cant find the screen anywhere online yet...if u decide to get rid of it for whatever reason then I would be willing to purchase the lcd from u (assuming u didn't break both screens) for a reasonable price & in order to help u make your money back. I could also part it out & put it on ebay for u...the motherboard alone should get a pretty penny
http://www.parts4repair.com/touch-screen-digitizer-for-samsung-galaxy-tab-pro-8-4-t320-t325-t321-black/?ref=lexity&_vs=google&_vm=productsearch&gclid=CK-_8fLzhL4CFe5aMgodskEASQ
^cheapest link I found (I cant vouch for the credibility of the sute bit as I stated above the part can be found at mor popular places as well)
Click to expand...
Click to collapse
LowaEastSide said:
Im sorry to read the situation the both of you are in, as for the first post i replied to i did mention the LCD & Digitizer, however doing the research on Ebay the Digitizer Cant be found, that really sucks, just makes me MUCH MORE aware of NOT dropping my device, they do feel really light a delicate, with that said I love watching movies on it in 1080p, the clarity is unbelievable. I'm loving this device, But on the other hand there isn't any development for it out, really sucks cause i was looking to switch it to the Google Addition of Android.. Or if a developer can cook up a Custom Rom from the S5 Operating System that would be SICKKK... That how i have my Note 3 running, exactly like the S5, its hottt... the best of Luck to you both, hope it works out. BLESS..!!
Click to expand...
Click to collapse
I actually replied to your thread about custom roms with something I was working on before the incident happened...its an extremely basic test build so its probably no where near what u want (no s5 setup) but if u want to test it out I posted the link in the other thread. I wish it was just my glass that was broken right now because it would already be fixed....I was able to find the digitizers on ebay althought there are only a few listings I'll post the lowest link below
EDIT: nevermind...probably should have checked my pm first. As far as the selinux function...if u go to "settings-general-about device" and scroll down to the very bottom u should see "se for android device" which will probably say "enforcing" although hopefully it will be set to "permissive" which would allow us to connect NTFS(WINDOWS) formatted hard drives to our device as well as other things
Zakanam said:
Thanks guys for replying, I totally appreciate it but yeah, my LCD itself isn't broken, just the glass so the touch screen digitizer is what I need. However, if I buy from eBay or from the given link, will the glass be of the same quality/made from the same thing? Cause the touch screen glass on the TabPro 8.4 feels so smooth and not cheap so I don't really wanna change that :/
And also, do you guys now if they sell the bezels? since they scratched too
Thanks again!
Click to expand...
Click to collapse
@Zakanam as for the quality of the part as far as I know most lcds are factory originals while most digitizers are usually aftermarket reproductions although I haven't EVER had an issue with any I've replaced as far as registering touches or smoothness. As I stated above device repair is part of what I do for a living although i'll admit I may have just been lucky...u will most likely have to wait until someone puts an 8.4 up for parts on ebay before u can find the bezels however I hope this helps
http://www.ebay.com/itm/Touch-Screen-Digitizer-Glass-For-Samsung-Galaxy-Tab-Pro-8-4-T320-T321-T325-/201077168569?pt=Other_Tablet_eReader_Accessories&var=&hash=item2ed12219b9
^CHEAPEST DIGITIZER ON EBAY
Does anyone know where I can buy the OEM backplate and possibly the cheap silver trim between the backplate and the screen?
I wrote a review on Amazon about what happened under the same name. Got nowhere with Samsung support, while looking for parts I found this post. Figured someone here may know.
THEDEVIOUS1 said:
I hate that it happened to u too but if all u did was crack the digitizer glass then consider yourself lucky because that part can be found all over the internet for as low as $40 (i'll link to a site below but as the user above said they are also on ebay...although for a higher price)...how about I also have the lte version BUT I broke the actual lcd display and somehow managed NOT to shatter the glass (weird but true). The crazy thing is I didn't even drop it...just picked it up and it was cracked/bleeding inside...not even sure if its something I did & not looking forward to arguing with Samsung about it either not to even mention the fact that's its actually a hong kong unit. The ironic part is I actually fix these things for a living but I cant find the screen anywhere online yet...if u decide to get rid of it for whatever reason then I would be willing to purchase the lcd from u (assuming u didn't break both screens) for a reasonable price & in order to help u make your money back. I could also part it out & put it on ebay for u...the motherboard alone should get a pretty penny
http://www.parts4repair.com/touch-screen-digitizer-for-samsung-galaxy-tab-pro-8-4-t320-t325-t321-black/?ref=lexity&_vs=google&_vm=productsearch&gclid=CK-_8fLzhL4CFe5aMgodskEASQ
^cheapest link I found (I cant vouch for the credibility of the sute bit as I stated above the part can be found at mor popular places as well)
Click to expand...
Click to collapse
In the same predicament. The lcd display on my 8.4 LTE T325 is broken, but the digitizer still recognizes touch. Finding a replacement screen is a pain, especially in the UK. Only quote I've managed to get is for £169, which is more than what I paid for it on ebay....decisions decisions...
stoney73 said:
In the same predicament. The lcd display on my 8.4 LTE T325 is broken, but the digitizer still recognizes touch. Finding a replacement screen is a pain, especially in the UK. Only quote I've managed to get is for £169, which is more than what I paid for it on ebay....decisions decisions...
Click to expand...
Click to collapse
Similar situation when I broke the screen on my Note 8. While glass was available at a reasonable price, the process to get it unglued from the digitizer looked too involved for me. The price for screen + digitizer was similar to the price of buying a new Note 8. So my solution . . . was to buy the Pro 8.4!
redpoint73 said:
Similar situation when I broke the screen on my Note 8. While glass was available at a reasonable price, the process to get it unglued from the digitizer looked too involved for me. The price for screen + digitizer was similar to the price of buying a new Note 8. So my solution . . . was to buy the Pro 8.4!
Click to expand...
Click to collapse
Lol. My solution was to buy the tab S 8.4 LTE. Still wondering whether it's worth fixing the tab pro or not
Hello, i broke my lcd a week after buying it and found only one place that has the digitizer and lcd as one unit. Its costly! $159.00 + $10.00 shipping from Singapore! here is the link
http://www.parts4repair.com/samsung-galaxy-tab-pro-8-4-t320-parts/
I did it on mine but proly could have found a new tablet for the cost! The repair was very easy.
Hi I have a similar problem but with a different tablet thr tab 4 7 inch which does not have gorilla glass so whatever glass is put in it does the tabpro have gorilla glass?
Anyway 2 days after buying it I sat on my tab 4 by accident while it was sitting in its box on my bed, the tablet just sunk to 1 side and collapsed in the box so I am hoping I didn't do any damage. Ive been so worried about it when I look at the screen and lcd thrre is no damage or cracks I can see is it possible the lcd at thr back of it cluld be cracked? Or is it pretty obvious if it is cracked?
Looking at youtube for vids I see cracked screens but if thr lcd is cracked even just a little bit will it show?
I put thr tablet back in thr box an d pushed down on it with my fingers to try to see how mufh pressure it takes to collapse in the box again..and I heard a crack sound im so stupid..I don't see any damage still and I think the crack sound was from the see through plastic sheet inside rhe box and the cardboard pressing dosn against it.
If I dont see any cracks or damage to thr lcd is it most likely ok? Im so paranoid now. Maybe I should return it just ij case and get a replacement seeing as I am in my 28 day returns period
Is it safe to assume if I can't see any cracks its unlikely to br damaged?
i may say had a bad luck when buying online via lazada.my , CANT claim warranty . still under warranty, not caused by dropping, its factory defect.. sent to singapore but not fixed, send to local seller and returned back. this is my timeline https://www.youtube.com/watch?v=9DD4dz3VTUs
no choice i gotta put aside till have enough money by myself. looking at aliexpress and dhgate, price still beyond my budget
fyi, aliexpress and dhgate i had good purchase track record
please watch and spread this https://www.youtube.com/watch?v=9DD4dz3VTUs
price complete set http://www.aliexpress.com/item/For-...2272498413.html?spm=2114.32010308.5.11.WBmYM2
might be mean but if your friend dropped it, he should be paying
this happened to me to, but about a month, and a half latter.
THE ONLY ADVICE I would give you is to go take it somewhere and get it fixed by a professional. If you follow that one YouTube Video, all your going to manage is cracking the Actual Display underneath the Glass. As it is these pieces are fused and, are essentially one unit. While it might be possible to just replace the Glass. It's doubtfull that finding the right fixer (i.e. Glue) would-be that simple. It also (to me) seems like the Tab Pro also has a thin polarising film between the Glass and the LCD display. Which was too easily damaged with the String technique. Not so much a problem if you have an extra 50.00€ for a pack of 25 Strips @ 8.4"
About your best option is to locate the next Samsung Depot (for myself that would be in the Netherlands), and they want ca. ~120.00€ (Before Tax!), for a replacement unit. (i.e. the Touchscreen + LCD + Frame. e.g. more like 169~€ by the time you work out shipping & tax.
Having a thought about it... It was just cheaper in the end to by a totally new neused Device. Which then set me back a 175.00€.
but those Displays from Fleebay, are as I gather chepo counterfeit Chinese Displays which are not as good as the original ones. Be that as it may... I'd have yet to find one that came with the Frame (i.e. with the Home Button.), cause for ~115€ they sure don't, and again you'd have to figure out how to reglue that bit without destroying the new Display.
1miracle2 said:
Does anyone know where I can buy the OEM backplate and possibly the cheap silver trim between the backplate and the screen?
I wrote a review on Amazon about what happened under the same name. Got nowhere with Samsung support, while looking for parts I found this post. Figured someone here may know.
Click to expand...
Click to collapse
My guess is your supposed to recycle the Backplate from the Original Screen. I guess getting it off the old one may be one thing. But how you'd go about regluing it back to the new Screen is to me questionable.
The 'Silver' bit is the rear cover. So One would think you already had that bit. in fact it's between this and the Glass Panel where you need to take a thin but very stiff like a Driver's License. To pry open the Device.
Again the best way to go is either though Samsung Direct, or one of its other partners.
It would also be helpful to know the Part Nr. Which are:
GH97-15740A (White)
GH97-1574B (Black)
Needless to say at those prices... You may well be better off buying a whole new Device.
I have an excellent condition digitizer but the glass is cracked. If wants to buy it they will have to remove the glass. Its from a T705
I too have a replacementWhite Digitizer Screen (White), still in the Envelope it came in with. Which I bought in a panic, after having also dropped my first T325. T_T.
Unless your very skilled, or know someone who is, at removing said Damaged Digitizer. I would forget this exercise. As you will at the least of it damage the Polarising Filter (Between the Digitizer, and the LCD Display), and at worst actually damage the LCD Display.
Having replaced a few Chinese Devices with their cheap plastic Digitizers is nothing like the way Samsung have done it. Unfortunately both the Digitizer, and the LCD have been fused together, as One unit. Again with a sandwiched Polarising Filter in the Middle.
There have been some Videos of People fixing the T320 that way, but the T320 doesn't have a Speaker Grill on it either. When I tried it on m, first One, the Dental Floss kept getting caught on it, an eventually damaged the underlying Filter (Which if you had done this would appear as just White Light.) Eventually in that game of tug, and war the LCD completely disintegrated.
I eventually found the Part Number (from a Samsung Tech Manual) p, and was able to locate two possible locations from which to order a replacement Screen from. Samsung in the Netherlands, and some other 3'erd Party from Poland. But either way you were looking at about 160€'s before Postage, and VAT (e.g. Sales Tax, which was higher in the NL). Making a total replacement, both simplier, and more cost effective.
Did you try heating it up like in the videos? I think the key is getting the glue loosened up

Samsung galaxy tab pro 8.4 wifi screen broken

Hi guys my son dropped my tablet and all the screen are shattered. Is there any way where we can find a replacement screen? How easy to replaced the screen? Thanks in advance.
Sent from my Nexus 6 using Tapatalk
caloyzki said:
Hi guys my son dropped my tablet and all the screen are shattered. Is there any way where we can find a replacement screen? How easy to replaced the screen? Thanks in advance.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Not good, I'm pretty sure the tablet has a clear optic adhesive under the digitizer glass and lcd so if you remove the glass the glue will be remove too and you will be left with a display that looks like it has a big air bubble under the screen...(someone correct me if I'm wrong)
see the thread here (for the 12.2 model but I'm pretty sure it's the same for the 8.4)
http://forum.xda-developers.com/gal...p/replace-cracked-glass-tab-pro-12-2-t3251203
so you will most likely have to replace the digitizer glass+ lcd in one unit
for the full assembly you might be able to find these on ebay or aliexpress (china- might be official or knockoffs)
http://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20160117213008&SearchText=sm-t320+lcd
look for ones that include the LCD + Digitizer as one (usually around $100-$170) - also make sure the store has a good return policy and good feedback (maybe even good feedback for the item aswell), it is very hard to return to china so it's best to make sure before purchasing.
http://www.samsungparts.com/Products/Parts_and_Accessories/SMT320/Default.aspx
this place sells all the parts but you might need to email them to get specific part numbers - and well it's probably expensive
last but not least send it to Samsung and have them fix it, they will usually just swap out the lcd + digitizer with a new one.
otyg said:
Not good, I'm pretty sure the tablet has a clear optic adhesive under the digitizer glass and lcd so if you remove the glass the glue will be remove too and you will be left with a display that looks like it has a big air bubble under the screen...(someone correct me if I'm wrong)
see the thread here (for the 12.2 model but I'm pretty sure it's the same for the 8.4)
http://forum.xda-developers.com/gal...p/replace-cracked-glass-tab-pro-12-2-t3251203
so you will most likely have to replace the digitizer glass+ lcd in one unit
for the full assembly you might be able to find these on ebay or aliexpress (china- might be official or knockoffs)
http://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20160117213008&SearchText=sm-t320+lcd
look for ones that include the LCD + Digitizer as one (usually around $100-$170) - also make sure the store has a good return policy and good feedback (maybe even good feedback for the item aswell), it is very hard to return to china so it's best to make sure before purchasing.
http://www.samsungparts.com/Products/Parts_and_Accessories/SMT320/Default.aspx
this place sells all the parts but you might need to email them to get specific part numbers - and well it's probably expensive
last but not least send it to Samsung and have them fix it, they will usually just swap out the lcd + digitizer with a new one.
Click to expand...
Click to collapse
Thank you. I guess its too expensive to make a screen replacement for the tab. Not really worth it to fix it for $200. Rather than buy a new tab. Hopefully i can find somwhere else where they charged not that much. Thanks again.
Sent from my Nexus 6 using Tapatalk
caloyzki said:
Thank you. I guess its too expensive to make a screen replacement for the tab. Not really worth it to fix it for $200. Rather than buy a new tab. Hopefully i can find somwhere else where they charged not that much. Thanks again.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
I would check around with local repair shops (ones that specialize in tablet and phone repairs- since they should be very familiar with the oca film), maybe if you can supply them with a replacement digitizer, they can do the rest of the repair for cheaper.
you can check youtube for the oca film process (type oca film or LOCA screen) and a bunch of videos will come up.
otyg said:
Not good, I'm pretty sure the tablet has a clear optic adhesive under the digitizer glass and lcd so if you remove the glass the glue will be remove too and you will be left with a display that looks like it has a big air bubble under the screen...(someone correct me if I'm wrong)
see the thread here (for the 12.2 model but I'm pretty sure it's the same for the 8.4)
http://forum.xda-developers.com/gal...p/replace-cracked-glass-tab-pro-12-2-t3251203
so you will most likely have to replace the digitizer glass+ lcd in one unit
for the full assembly you might be able to find these on ebay or aliexpress (china- might be official or knockoffs)
http://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20160117213008&SearchText=sm-t320+lcd
look for ones that include the LCD + Digitizer as one (usually around $100-$170) - also make sure the store has a good return policy and good feedback (maybe even good feedback for the item aswell), it is very hard to return center, thatna so it's best to make sure before purchasing.
http://www.samsungparts.com/Products/Parts_and_Accessories/SMT320/Default.aspx
this place sells all the parts but you might need to email them to get specific part numbers - and well it's probably expensive
last but not least send it to Samsung and have them fix it, they will usually just swap out the lcd + digitizer with a new one.
Click to expand...
Click to collapse
It's crazy, this tablet costs more now used than what I bought it new for.
I too have a broken digitizer... And my screen has been going bad.. So unless you live near a samsung service center, that option is out. I keep seeing people suggest the LCD + digitizer replacement, but there is not one guide on how to actually do it.
The only thing I could find was some German guy on YouTube for a digitizer (not a whole LCD) replacement. How do you go about doing the replacement? The generic answer has been look at iFixIt or YouTube, but there isn't anything for this model...
TyIsOwned said:
It's crazy, this tablet costs more now used than what I bought it new for.
I too have a broken digitizer... And my screen has been going bad.. So unless you live near a samsung service center, that option is out. I keep seeing people suggest the LCD + digitizer replacement, but there is not one guide on how to actually do it.
The only thing I could find was some German guy on YouTube for a digitizer (not a whole LCD) replacement. How do you go about doing the replacement? The generic answer has been look at iFixIt or YouTube, but there isn't anything for this model...
Click to expand...
Click to collapse
I broke my digitizer the same week I got mine. I found only one place online to buy one. Google it, it's from China. It was about $160.00ish.. I followed the tutorial for galaxy tab s on YouTube. It was very easy.

Screen broken:(

Hello
Where may I a replacing screen for my Le Max 2? It has just fallen on the floor and is broken even though the touch screen is still working
thanks
Hope this helps. Check the store feedback before buying.
http://www.aliexpress.com/wholesale...030452&SearchText=le+max+2+replacement+screen
Good to know it can be done and there are spare parts around.
Always thought it was fatal with these newer "design over everything" phones.
neo299 said:
Hope think is helps. Check the store feedback before buying.
http://www.aliexpress.com/wholesale...030452&SearchText=le+max+2+replacement+screen
Click to expand...
Click to collapse
Thx for your reply. Can you say which lcd screen is made by LeTV or is there an LCD screen which is made by LeTV? Thx
I don't know. Perhaps someone else on the forum has that information. I think they sell original screens but it's best you contact the sellers directly before ordering.
lcarrere said:
Hello
Where may I a replacing screen for my Le Max 2? It has just fallen on the floor and is broken even though the touch screen is still working
thanks
Click to expand...
Click to collapse
Try Le TV service centre ????
Hi!
Any update since October? I`m facing the same issue. I have googled a bit and found some complaints related to LCDs from Aliexpress claiming that they are no so bright and blurry, sometimes with white spots.
I have also find only a glass replacement https://www.aliexpress.com/item/5-7...lgo_pvid=aec8908f-0e28-4202-a650-ab20f3981970
of a glass with digitizer: http://www.ebay.com/itm/for-LeEco-L...966586?hash=item58e23ffdba:g:z4wAAOSw-kdXxPkl
But... also a lot people claims that the LCD is almost inseparable from glass... Do anyone have an experience with only glass replacement?
I found a local service that claims to be able to do that.. but I do not know whether to trust them not destroy the LCD. The said, that they do not have an experience with Le Max 2 but with other phones.
Thanks
xjack03 said:
Hi!
Any update since October? I`m facing the same issue. I have googled a bit and found some complaints related to LCDs from Aliexpress claiming that they are no so bright and blurry, sometimes with white spots.
I have also find only a glass replacement https://www.aliexpress.com/item/5-7...lgo_pvid=aec8908f-0e28-4202-a650-ab20f3981970
of a glass with digitizer: http://www.ebay.com/itm/for-LeEco-L...966586?hash=item58e23ffdba:g:z4wAAOSw-kdXxPkl
But... also a lot people claims that the LCD is almost inseparable from glass... Do anyone have an experience with only glass replacement?
I found a local service that claims to be able to do that.. but I do not know whether to trust them not destroy the LCD. The said, that they do not have an experience with Le Max 2 but with other phones.
Thanks
Click to expand...
Click to collapse
If you can get the fast delivery, then you can give it a go. Although it's a risky operation,it might be alright in the end. The service should have some experience if they say that for other brands/phones they have succeeded. It might be ok, but always keep in mind that something might go wrong. And it's not worth waiting 2 months for the glass and another 2 for the display.
Edit: you can google the process and you will see how it's done for other phones. They need to have special devices.
valy_cta said:
If you can get the fast delivery, then you can give it a go. Although it's a risky operation,it might be alright in the end. The service should have some experience if they say that for other brands/phones they have succeeded. It might be ok, but always keep in mind that something might go wrong. And it's not worth waiting 2 months for the glass and another 2 for the display.
Edit: you can google the process and you will see how it's done for other phones. They need to have special devices.
Click to expand...
Click to collapse
Thanks for such a fast reply. I already did https://www.youtube.com/watch?v=cRqSyZk1SOU It seems to be very tricky. I have relatively fast delivery about 2-3 weeks so I`ll give it a try with only a glass an digitizer http://www.ebay.com/itm/for-LeEco-L...966586?hash=item58e23ffdba:g:z4wAAOSw-kdXxPkl.
I`ll write a review after the whole process is done for future reference
Very difficult. They make it look easy on youtube. I attempted a glass only repair on a nexus 6. You have to have correct amount of heat, and the LCD is very fragile. Too much heat will damage the display, but you need enough heat to soften the loca glue to be able to separate the glass from the lcd.. I even had a scientific dry bath at my disposal to get the right temp.. Not worth a home repair attempt IMO.
Cost of the le max 2 is just the reason I bought this phone (vs a $600+ device) and put on tempered glass from Ali express for less than $2. Will you consider replacing your phone for $200?
My wife broke her tempered glass protector twice on the max 2. Easy fix, just replaced the tempered glass cover. I'm just saying I learned the hard way, on a more expensive Nexus 6. I wasn't aware of tempered glass protectors then. Even after destroying my lcd (by trying a glass-only repair) and ending up buying the lcd+glass assembly, I still didn't get the phone's frame tight with the display assembly to make it acceptable.
I tried to repair lcd once for another phone. It took me 1h just to disassemble the phone, and half an hour more to try to carefully separate lcd from digitizer. I failed and then there was no point spending another hour puting the phone back together and had to throw all those tiny parts to the garbage. Think about this before you try.
Home repairs of such kind are a no go. This is why I encourage him to go to the repair shop where they do that kind of repairs to the screen. They do have a special heated plate with temperature adjustment, a vacuum device that eliminates any bubbles between the lcd and glass, etc. Also do note that not all the repair shops are doing this. Most of them are collecting phones for the specialized shops and charge an extra fee.
In conclusion, this kind of repair is not for everybody, and it would be best done in a specialized repair shop. For reference, check the following video:
I know it's written in romanian and for an Allview, but I guess that most of the things are understandable to get the idea of how complicated the whole process is for any home attempt.
So, after a month in repair center I have my phone back. The screen is an original one with digitizer changed. Between digitizer and screen there are some bubbles, buttons are switched, like back is on a left instead of right and the bugged issue... They are very undeterministic and do not always work and sometimes they work without even touching so... Apps are switching and so on... I needed to disable them and use gestures instead.
The repair was about 40USD and digitizer 15 USD... It is hard to say whether it was worth it or exchange the complete screen.
Hello, please help me.
I live in MAYOTTE, I have to order a new screen. I do not find any vendor who delivers in my country.
Mayotte : https://goo.gl/maps/m62kwSK7yC92
raphimor said:
Hello, please help me.
I live in MAYOTTE, I have to order a new screen. I do not find any vendor who delivers in my country.
Mayotte : https://goo.gl/maps/m62kwSK7yC92
Click to expand...
Click to collapse
I'm the owner of the repair shop. I can take care of this phone, but I'm living on the other end of the world. Is there any career that can deliver something to you from Europe? I would like to make a video tutorial how to repair this phone, but mine one is working so there is no sense in repairing working phone...
CrazyPonkeyMen said:
I'm the owner of the repair shop. I can take care of this phone, but I'm living on the other end of the world. Is there any career that can deliver something to you from Europe? I would like to make a video tutorial how to repair this phone, but mine one is working so there is no sense in repairing working phone...
Click to expand...
Click to collapse
Yes of course. I can receive a parcel from europe thanks to CHRONOPOST
raphimor said:
Yes of course. I can receive a parcel from europe thanks to CHRONOPOST
Click to expand...
Click to collapse
I can personally recommend this vendor. https://www.aliexpress.com/item/For...32820735893.html?spm=a2g0s.9042311.0.0.xEXMor
Replacing the screen + digitiser on this model is pretty easy provided you have access to a hot air gun. Took me about 15 minutes and I'm in NO WAY a pro. For the price of a new screen I definitely wouldn't attempt a digitizer-only repair.
mikeysteele said:
I can personally recommend this vendor. https://www.aliexpress.com/item/For...32820735893.html?spm=a2g0s.9042311.0.0.xEXMor
Replacing the screen + digitiser on this model is pretty easy provided you have access to a hot air gun. Took me about 15 minutes and I'm in NO WAY a pro. For the price of a new screen I definitely wouldn't attempt a digitizer-only repair.
Click to expand...
Click to collapse
Wow.... That's cheap enough to order one and have it just in case.....
Thanks for the link
I have brought this one.
https://www.aliexpress.com/item/Gra...32799506808.html?spm=a2g0s.9042311.0.0.HsyGUO
And I can say, It's same as the original one in every detail(Even production date so close). Replacement is very easy with tool that came with screen.
BTW, You have to buy glue(B6000,E7000,T8000 or whatver) for fix it in place.

Lenovo p2 replacement screen

Hi I'm wondering where I could source a replacement screen for this device as none of my local phone repair shops seem to be able to source one
http://s.aliexpress.com/BRzQZBBV
Here you go and good luck with the replacement
P.S.
If you are looking for the black model, follow this link: Replacement Display
Bump
Has anybody got a reliable source? There seems to be a global shortage of these bloody screens and besides the official Lenovo replacement costing 90% of the price of the phone, there are no other options available anywhere. Nothing on AliExpress, BangGood, Alibaba, eBay and anywhere else in my coutry.
Phantoml337 said:
Bump
Has anybody got a reliable source? There seems to be a global shortage of these bloody screens and besides the official Lenovo replacement costing 90% of the price of the phone, there are no other options available anywhere. Nothing on AliExpress, BangGood, Alibaba, eBay and anywhere else in my coutry.
Click to expand...
Click to collapse
+1. Cracked my screen last week, still fully functional but crack pattern is expanding and I don't trust it to be usable for a long time to come.
Been searching for replacement screen assembly but found nothing. Going to try contacting Lenovo technical support in my country now...
Lenovo tech support pointed me to a repair firm.
Repair firm asks to send the phone in, after which they provide a quote. If I don't agree to get it fixed, I have to pay a few tens for problem analysis. Like wtf, it's a cracked screen, you change it, it's a standard job with a standard cost that you can give me before I send it in!
Called another repair firm. They can't get the screen.
Apparently these screens are just not available.
They are on Aliexpress right HERE.
Expensive as hell though, considering you can get a new P2 for 180 euro's or a new screen for 160.
The Dutchman said:
They are on Aliexpress right HERE.
Expensive as hell though, considering you can get a new P2 for 180 euro's or a new screen for 160.
Click to expand...
Click to collapse
Thanks, that one is gone again though. And yeah at that price it's ridiculous.
But I've just found this: https://nl.aliexpress.com/item/For-...lgo_pvid=b8eb5b04-c098-4a2b-a5ea-f9e34e6da00f
$113, which amounts to €94, with free shipping. This seems acceptable.
---------- Post added at 11:35 AM ---------- Previous post was at 11:27 AM ----------
Well, the seller had just one of them so I bought it. Now let's hope my cracked screen stays functional for the time it takes to get the new screen here...
Hi, I also have problem with broken lcd in my lenovo where I could buy lcd replacement for this device? I cant find it anywhere!
Please help
pawelisek said:
Hi, I also have problem with broken lcd in my lenovo where I could buy lcd replacement for this device? I cant find it anywhere!
Please help
Click to expand...
Click to collapse
Seems like nowhere.
The order I made on aliexpress was subsequently cancelled because of it being "out of stock".
Options at this point seem limited to:
1. get it fixed for stupid money (not even sure whether any fixing service can get their hands on it)
2. try to locate a damaged second-hand phone with working screen you can buy for less
3. if your LCD and touch input still work fine like mine, just put up with it and wait for some months until people start upgrading and the asking prices for second-hand models start to drop
4. meanwhile, search on aliexpress or ebay every single day and hope a screen gets available for an acceptable price
I dropped my phone yesterday and the screen shattered from end to the other but the phone is working fine. I have just ordered the replacement front glass off of ebay for £19.99 from HK but seems a bit too cheap to me but worth a gamble at that price. Only problem is I have no idea how to take the phone apart and separate the glass from the digitizer! Are there instructions about I could follow or is my best bet taking it to a mobile phone repair shop to get it done?
I can post the ebay number if anyone is interested.
Sp0oner said:
I dropped my phone yesterday and the screen shattered from end to the other but the phone is working fine. I have just ordered the replacement front glass off of ebay for £19.99 from HK but seems a bit too cheap to me but worth a gamble at that price. Only problem is I have no idea how to take the phone apart and separate the glass from the digitizer! Are there instructions about I could follow or is my best bet taking it to a mobile phone repair shop to get it done?
I can post the ebay number if anyone is interested.
Click to expand...
Click to collapse
I have a crack on my screen. I ordered a replacement glass on AliExpress which costs just ₹1450.
Its just the glass and not touch digitiser which costs₹10500.
senseijtitus said:
I have a crack on my screen. I ordered a replacement glass on AliExpress which costs just ₹1450.
Its just the glass and not touch digitiser which costs₹10500.
Click to expand...
Click to collapse
Have you got instructions on how to take the phone apart and separate the glass from the digitizer? The last part is what i'm worried is going to be extremely difficult?!
Sp0oner said:
Have you got instructions on how to take the phone apart and separate the glass from the digitizer? The last part is what i'm worried is going to be extremely difficult?!
Click to expand...
Click to collapse
You tube. Check the entire display removal tutorial. Then check glass replacement tutorial for galaxy s8.
After taking off display, you have to chip off the glass from display after heating it with a hot air gun. Then remove the residual UV glue from panel. Then after making sure panel is clean, apply new UV glue on center, then place glass on top and then press from center gently to spread the glue evenly and that's it.
senseijtitus said:
You tube. Check the entire display removal tutorial. Then check glass replacement tutorial for galaxy s8.
After taking off display, you have to chip off the glass from display after heating it with a hot air gun. Then remove the residual UV glue from panel. Then after making sure panel is clean, apply new UV glue on center, then place glass on top and then press from center gently to spread the glue evenly and that's it.
Click to expand...
Click to collapse
Thank you but i'm never going to manage to do that myself, I don't own a hot air gun for a start. Looks like i've wasted £20 plus the postage as I doubt i'll find a mobile phone repair shop to do it for me, i'd happily pay someone to do it if I could find someone!

Categories

Resources