FrankenKernelThis kernel is pieced from two beautiful kernels made by KlinkOnE and Codename13,hence the name Franken (shortend from Frankenstein)
I used Codename13's kernel_samsung_kylessopen as base ,and reused a huge number of KlinkOnE android_kernel_ba2x_2.0-1 commits,plus handfull of commits I think help.
This kernel is intended for Kylessopen devices,meaning its for S7560,S7560m,S7562,S7562L devices.
This kernel is compatible with CM11 and PAC-Rom 4.4.4
I will try to keep this kernel alive and running,
but to all users and devs,
please be aware that this is my first venture into "kernel-land" so some bugs are bound to show their ugly face.
DOWNLOAD LINK: https://www.androidfilehost.com/?fid=745425885120730785*Change log
Kernel updated from 3.0.60 to 3.0.101
A lot of small fixes
If kernel breaks your phone dont blame me,I didnt force you to flash it.
Souce code to FrankenKernel is here:https://github.com/pavlepiramida/FrankenKernel/tree/master
FrankenKernel with GPU OC to 300Mhz
*This version has GPU set to 300MHz,and its compiled with gcc-4.4.3 like stock kernel is.
This gcc provides a bit better graphic performance,but is also a smidge worst when it comes to CPU performance.
Kernel features:
*3 I/O schedulers:
-Deadline
-Zen(default)
-CFQ
3 CPU governors:
-Ondemand
-Lulzacive
-Performance
GPU is clocked at default ~246MHz
Kernel block has been refreshed and updated a bit,ensuring a bit more optimal IO performance
Dynamic FSync feature
DDP Writeback
Latest kernel changelog:
*Disabled KSM
Most wouldnt agree with me on this,but the fact is that KSM is way too heavy on processor which also affects battery.
Kylessopen has enough memory,it doesnt need to squeeze every byte of ram at the cost of CPU performance,and in my opinion KSM isnt a vital function
*Changed few kernel flags
Just experimenting with flags,trying to find best one that can complement kernel even more
*Switch to a better gcc
@kengnatural and I spent a whole week testing and benchmarking different compiler for kernel,until we realized that sabermod-4.7 gcc brings the most out of our Kylessopen kernels.From now on using only SaberMod gcc.
Works on s7562 with charm
Ritik99 said:
Will it work on s7562. Or will i get bugs?
Click to expand...
Click to collapse
Please read OP.
Then re-read it,if you are still unsure,keep reading OP until you figure it out.
pavlepiramida said:
Please read OP.
Then re-read it,if you are still unsure,keep reading OP until you figure it out.
Click to expand...
Click to collapse
Was just making sure that it won't brick my phone
WORKS ON S7562 WITHOUT any bugs.
Thanks
Ritik99 said:
Was just making sure that it won't brick my phone
WORKS ON S7562 WITHOUT any bugs.
Thanks
Click to expand...
Click to collapse
use cfq io governor
pavlepiramida said:
use cfq io governor
Click to expand...
Click to collapse
Why only 3 governers?
Ritik99 said:
Why only 3 governers?
Click to expand...
Click to collapse
why would you need more?
pavlepiramida said:
why would you need more?
Click to expand...
Click to collapse
1 or 2 were good
But these are also working nicely :good:
Is this for stock only or is it compatible with cm11?
RJinxed said:
Is this for stock only or is it compatible with cm11?
Click to expand...
Click to collapse
It is compatible with cm11, i have tested it.
RJinxed said:
Is this for stock only or is it compatible with cm11?
Click to expand...
Click to collapse
WoW
I forgot to update kernel info with such stuff....
Thanks for reminding me,Ill do it asap
Why no option to set CPU frequency to 1.3 GHz ?only 1.1 GHz?but why?
apratul Vasu said:
Why no option to set CPU frequency to 1.3 GHz ?only 1.1 GHz?but why?
Click to expand...
Click to collapse
Phone will have soft reboots bug if you use 1.3 GHz
Ritik99 said:
Phone will have soft reboots bug if you use 1.3 GHz
Click to expand...
Click to collapse
It will be back in final build?
apratul Vasu said:
It will be back in final build?
Click to expand...
Click to collapse
I think yes, but its not recommended. Our phone starts misbehaving after 1.2 GHz
Ritik99 said:
I think yes, but its not recommended. Our phone starts misbehaving after 1.2 GHz
Click to expand...
Click to collapse
Ohh k but good thing is that I am noticing great improvement in batttery
apratul Vasu said:
Ohh k but good thing is that I am noticing great improvement in batttery
Click to expand...
Click to collapse
With 1.3Ghz or 1.1Ghz
Ritik99 said:
With 1.3Ghz or 1.1Ghz
Click to expand...
Click to collapse
With 1.1ghz
Related
hello folks,i present before u a custom kernel ,nothing much atm(testing time),but u can test it out.
This was compiled from AT&T source,but should work on Roger's devices.
Test it out-Flash via odin.
Download(v1 beta)- http://www.mediafire.com/?x81icy317yy02iv
DownloadV2(1.35 Ghz)- http://www.mediafire.com/?bhaklnqyuo1ax6p
kernel Source - https://github.com/sakindia123/Cranium_I927
I will test this now
Sorry if i did not make it yesterday. I am testing this one now and so far, working great.
I will be on school in next hour, if you'd upload a CWMR version, I can test both CWM and your kernel at the same time
EDIT: Booted up and working fine
Linux Kernel 2.3.36.3
PREEMPT Mon Jan 23 16:07:38 IST 2012
woot! so it worked
now compiling another kernel with some tweaks.Comin' up soon
sakindia123 said:
woot! so it worked
now compiling another kernel with some tweaks.Comin' up soon
Click to expand...
Click to collapse
yeah and that is great!
I will be on school in next hour, if you'd upload a CWMR version, I can test both CWM and your kernel at the same time
I don't have access to a computer with Odin during school hours but I will assure you that I will continue to be a guinea pig for this one.
updated with v1 beta....
@gabby-sorry dude.Uploaded the ODIN one
sakindia123 said:
updated with v1 beta....
@gabby-sorry dude.Uploaded the ODIN one
Click to expand...
Click to collapse
No worries.....that will be tested, odin or non-odin
EDIT: version 1 beta booted on my glide. New sio and vr i/o scheduler, removed some governors (ondemand, interactive, performance available). Everything is working and this is my daily driver for school this morning.... cheers!
gabby131 said:
No worries.....that will be tested, odin or non-odin
EDIT: version 1 beta booted on my glide. New sio and vr i/o scheduler, removed some governors (ondemand, interactive, performance available). Everything is working and this is my daily driver for school this morning.... cheers!
Click to expand...
Click to collapse
ooh.Ran any benchmarks yet?
Will soon release an overclockable version (upto 1.7 Ghz)
sakindia123 said:
ooh.Ran any benchmarks yet?
Will soon release an overclockable version (upto 1.7 Ghz)
Click to expand...
Click to collapse
Not yet....but I see that haptic feed back is not that strong or not as intensified as normal but not a big deal.
Vibration is also weak, it's on the state that you cannot feel it if it's in your pocket.
1.7ghz is mind blowing! there's UV too right?
EDIT: Benchmarks that I initiate.
Quadrant: 3300 (sio, interactive, 216mhz ~ 1000mhz)
Linpack: 34.815 MFLOPS (sio, interactive, 216mhz ~ 1000mhz)
Thanks for the quick work! Working well so far.
Sent from my HTC Desire HD using XDA App
any difference in benchmarks?
btw,Samsung had gone crazy and set performance as default governor
and yes,there will be uv,and phone will boot at 1 ghz
sakindia123 said:
any difference in benchmarks?
Click to expand...
Click to collapse
big difference in my observation on Quadrant (before hackzzzz ) almost no change in Linpack
sakindia123 said:
btw,Samsung had gone crazy and set performance as default governor
Click to expand...
Click to collapse
WHAT? is that on the leaked FW??? They are planning to blow up every Captivate Glide
sakindia123 said:
and yes,there will be uv,and phone will boot at 1 ghz
Click to expand...
Click to collapse
AWesOme!!!!! looking forward to the OC version
Oh BTW, i am sorry if i repeat myself, but the v1 beta has low vibration intensity on haptic feedback and notifications.
gabby131 said:
big difference in my observation on Quadrant (before hackzzzz ) almost no change in Linpack
WHAT? is that on the leaked FW??? They are planning to blow up every Captivate Glide
AWesOme!!!!! looking forward to the OC version
Oh BTW, i am sorry if i repeat myself, but the v1 beta has low vibration intensity on haptic feedback and notifications.
Click to expand...
Click to collapse
check ur settings.......i didn't mess with drivers..yet
i will first go upto 1.3 Ghz,then 1.7
sakindia123 said:
check ur settings.......i didn't mess with drivers..yet
i will first go upto 1.3 Ghz,then 1.7
Click to expand...
Click to collapse
my setup under Settings > Sound > Vibration Intensity are all maxed out.
Rebooting does not solve it. I will try reflashing the kernel. Thanks
EDIT: apologies for my ignorance, I can say my statement is a false alarm. Wiped Dalvik and cache partition before and after reflash of v1 beta and vibration is back to normal
updated with overclocked version.Plus some more changes.Too lazy to write changelogs!
sakindia123 said:
updated with overclocked version.Plus some more changes.Too lazy to write changelogs!
Click to expand...
Click to collapse
nice....but i think i am dreaming, the higher the frequency the lower the voltage? hooh haah!
EDIT: screw that, it's a voltage control app bug! >_< using cpu master atm
EDIT 2: Overclocked to 1.3ghz using CPU Master! UV of -100mV in each step > 1000mhz and so freakin' fastastic! I can't believe how low voltage Tegra chips are
can u post some benchamark results?antutu is more reliable imho
sakindia123 said:
can u post some benchamark results?antutu is more reliable imho
Click to expand...
Click to collapse
y u can read my minds? doing that atm.....
EDIT: They say "no screenies, or it did not happen!"
Voltages
benchmark (antutu)
Do you think you can make a version that can be flashed via CWM? Thanks for your work.
While arco is working on 3.x kernel, i've made a 2.6.35 version for JB.
Features and changelog:
V1:
-smartassV2 governor
-interactivex governor
-lazy governor
-lulzactive governor
-lionheart governor
-ondemandx governor
-intellidemand governor
-smartass governor
-lagfree governor
-Savagedzen governor
-scary governor
-smoothass governor
-brazillianwax governor
-minmax governor
-SIO scheduler
-CFQ scheduler
-BFQ scheduler
-VR scheduler
-ZEN scheduler
-NOOP scheduler
-DEADLINE scheduler
-Dynamic Fsync
-KSM
-Overclock
-Undervolt
-Some performance and battery tweaks i dont remember
V1.1:
-fixed wifi issues on PACman and paranoid android (cleancache removed)
-added 61, 122 and 1900 mhz frequencies
-added SFB network scheduler
V2:
-removed 61 mhz frequency
-added cleancache, zcache and zram with snappy compression
-adjusted governors to get more battery life (if you want more performance look here: http://forum.xda-developers.com/showthread.php?t=1369817)
-tweaked memory, schedulers....
Initially the kernel comes in 3 versions (CFS only for now):
-NORMAL = 352MB of RAM = 720p and 480p recording in every camera app
-MAXMEM = 395MB of RAM = breaks NATIVE CAMERA 720p and 480p recording, so use lgCamera from Market (only 480p)
-PRIVATE = 395MB of RAM + components and cpu undervolted (thats the version i compile for myself to daily use)
forfivo said:
While arco is working on 3.x kernel, i've made a 2.6.35 version for JB.
Features:
-smartassV2 governor
-interactivex governor
-lazy governor
-lulzactive governor
-lionheart governor
-ondemandx governor
-intellidemand governor
-smartass governor
-lagfree governor
-Savagedzen governor
-scary governor
-smoothass governor
-brazillianwax governor
-minmax governor
-SIO scheduler
-CFQ scheduler
-BFQ scheduler
-VR scheduler
-ZEN scheduler
-NOOP scheduler
-DEADLINE scheduler
-Dynamic Fsync
-KSM
-Overclock
-Undervolt
-Some performance and battery tweaks i dont remember
Initially the kernel comes in 2 versions (CFS only for now):
-NORMAL = 352MB of RAM = 720p and 480p recording in every camera app
-MAXMEM = 398MB of RAM = breaks NATIVE CAMERA 720p and 480p recording, so use lgCamera from Market
Click to expand...
Click to collapse
Thanks Forfive!!!
i can't use wi-fi. with both kernel.
forfivo said:
-MAXMEM = 398MB of RAM = breaks NATIVE CAMERA 720p and 480p recording, so use lgCamera from Market
Click to expand...
Click to collapse
I guess that 720p video recording does not work with lgCamera, when MaxMem-Configuration is active?
My question is about the mount spots and the problem with the previous kernel and if that has been addressed and fixed?
sorry..can use this kernel for ICS? coz same version, v2.6.35
LittleDoggy said:
My question is about the mount spots and the problem with the previous kernel and if that has been addressed and fixed?
Click to expand...
Click to collapse
Yeah.. is the mount problem solved? And is wifi working?
Don't hesitate pressing the "thanks" button
Ekril said:
i can't use wi-fi. with both kernel.
Click to expand...
Click to collapse
Which rom are you using?
7amada100 said:
Which rom are you using?
Click to expand...
Click to collapse
I am using Pacman 18.0.1
Thx forfivo, but smartassv2 needs to be tweaked. On use cpu never goes below 768mhz.
This max mem settings are awsome since I don't care a out video recording. But i think you can fix the 480p video for stock camera.
Is there a way to port this kernel to galaxy s plus?
Sent from my GT-I9001 using xda app-developers app
forfivo sorry to tell this. you should have some apk to setting kernel which can setting the ram. such 352mb,398mb etc. and then reboot the phone like devil kernel
rizky syahputra said:
forfivo sorry to tell this. you should have some apk to setting kernel which can setting the ram. such 352mb,398mb etc. and then reboot the phone like devil kernel
Click to expand...
Click to collapse
Jut wait for other release please
-sent from my awesome phone-
how to install it. my phone stuck at the bootanimation
I confirm wifi not work. Missing drivers maybe?
-sent from my awesome phone-
hotheabilly said:
I confirm wifi not work. Missing drivers maybe?
-sent from my awesome phone-
Click to expand...
Click to collapse
missing module maybe?
may i know the source so i can try building my own kernel? i've checked arco's but can't find kernel source for jb
Edit: wifi work with arco cm10, on pac it doesnt. Great work forfivo!!
-sent from my awesome phone-
hotheabilly said:
Edit: wifi work with arco cm10, on pac it doesnt. Great work forfivo!!
-sent from my awesome phone-
Click to expand...
Click to collapse
just like this.
Ekril said:
i can't use wi-fi. with both kernel.
Click to expand...
Click to collapse
Which rom are u using? In my tests i cant make it work with camcory's rom (pacman and paranoid). Im tryin g to address whats happening.
LittleDoggy said:
My question is about the mount spots and the problem with the previous kernel and if that has been addressed and fixed?
Click to expand...
Click to collapse
robbayani said:
sorry..can use this kernel for ICS? coz same version, v2.6.35
Click to expand...
Click to collapse
I don't know. But i dont think it will work because initram is defferent (mount points, and so on...)
reddvilzz said:
Yeah.. is the mount problem solved? And is wifi working?
Don't hesitate pressing the "thanks" button
Click to expand...
Click to collapse
Wifi is not working only with paranoid and pacman. Im figure it out whats happening.
Ekril said:
I am using Pacman 18.0.1
Click to expand...
Click to collapse
I've tested with pacman and its not working. I still dont know how.
MiguelPT said:
Thx forfivo, but smartassv2 needs to be tweaked. On use cpu never goes below 768mhz.
This max mem settings are awsome since I don't care a out video recording. But i think you can fix the 480p video for stock camera.
Click to expand...
Click to collapse
I'll check it. Smartass is a pain in the as.... to tweak....
Diablob555 said:
Is there a way to port this kernel to galaxy s plus?
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
I'll will update my github sources soon.
rizky syahputra said:
forfivo sorry to tell this. you should have some apk to setting kernel which can setting the ram. such 352mb,398mb etc. and then reboot the phone like devil kernel
Click to expand...
Click to collapse
Setting the ram without flashing a new kernel is not possible at the moment.
rizky syahputra said:
how to install it. my phone stuck at the bootanimation
Click to expand...
Click to collapse
Give me details about what u are doing and which rom u are using.
hotheabilly said:
I confirm wifi not work. Missing drivers maybe?
-sent from my awesome phone-
Click to expand...
Click to collapse
hadidjapri said:
missing module maybe?
may i know the source so i can try building my own kernel? i've checked arco's but can't find kernel source for jb
Click to expand...
Click to collapse
Wifi isn't working with pacman and paranoid. I checking into it. And i'll update my github soon.
hotheabilly said:
Edit: wifi work with arco cm10, on pac it doesnt. Great work forfivo!!
-sent from my awesome phone-
Click to expand...
Click to collapse
Wow. It works although I do kinda miss being able to set my lowest frequency to 122MHz instead of 192MHz and I hope thats restored in a new version but apart from that everything seems to be working fine.
This is kylon's AndromadusMod kernel, originally for Saga / Desire S, but compiled by me from source for our Vision. Massive thanks to the Andromadus team and to kylon for his awesome mods. Built with the Linaro toolchain.
From kylon's original thread:
Code:
Only experimental [COLOR="Red"] (=)[/COLOR]
Features:
sync with Andromadus: Apr 17 2013
Gov: intellidemand, dyn interactive, conservative, ondemand, userspace, powersave, ondemandx, performance, smartassH3
Sched: noop, deadline, row, cfq, bfq, sio
Overclock up to 2.0Ghz (=)
Cpu aligned access
ext4 optimizations
LZO kernel compression
KMS
SLUB allocator(default) with some optimizations
dynamic file sync (=)
UnderVolt / OverVolt
The kernel is already uved (post #3 )
vmstat, MM, shmem updated to linux 3.4
Tweaked gov and scheduler to work better on android
some optimizations here and there
expire time about each entry of scan results: 15 *Hz
force AC charger for unknown chargers(like carKit)
ck1 patchset
enabled clean cache
enabled zRam
NLS-UTF8
enabled power collapse to save battery(?)
Removed almost any debug message to improve the performances
USB OTG (=)
NTFS r/w (=)
CIFS (=)
Power saving when the wifi is off
More RAM for us
what i forgot..
Bugs:
Same as Stock Andromadus
USB otg: usb sticks are not working
Click to expand...
Click to collapse
I know USB otg definitely won't work, and at the moment I haven't used LZO kernel compression. I'm not sure if there will be "more RAM for us", being as the original kernel was for the Saga, which had more RAM in the first place. Other than that, all the visible changes, such as governors, I/O schedulers, OV/ UV, etc., appear to be working.
Downloads:
At the bottom of the post you can find the flashable zip, I have also attached the original Andromadus 3.x kernel (Original.zip) in case you want to revert, the only thing I've changed about this is I've added CPU idle PM support, this should help with battery life but it's nothing drastic, and other than that I've left it alone.
Changelog from original thread, red changes are mine:
Changelog:
Code:
[COLOR="red"]27/04
First build for Vision.[/COLOR]
25/04
sync with Andromadus
3.0.74
10/04
sync with Andromadus
3.0.72
Added LZ4/LZ4HC kernel compression(disabled for now, the zImage cannot be flashed)
Now LZO kernel compression(Hope it will help the reboot a bit)
No debug msges for the camera
04/04
sync with Andromadus
3.0.71
Added a tweak that should help to save some RAM
17/03
sync with Andromadus
3.0.69
08/03
sync with Andromadus
3.0.68
added more freqs
added 1.9Ghz and 2.0Ghz (exp)
Overvolt up to 1600
compiled with linaro 13/02
25/02
sync with Andromadus
3.0.66
tweaked bfq
prevent a possible crash on suspend/resume event
17/02
sync with Andromadus
3.0.64
power saving when the wifi is off
08/02
stability fix
minor changes(see github)
05/02
Sync with andromadus
3.0.62
USB OTG enabled and working(Only experimental)
NTFS r/w(Only experimental)
CIFS(Only experimental)
New Gov. SmartassH3
a few improvements(see github for a full changelog)
19/01
Sync with andromadus
18/01
sync with andromadus
linux 3.0.59
updated the android logger to linux 3.8
new voltage for 1.2Ghz (test) - 1.2 should not be higher than 1.3
more robust compaction
less modules
minor changes
13/01
forgot to upload this version, sorry (my real life is an hell)
added ck1 and dynamic file sync
OverVolt up to 1550
Click to expand...
Click to collapse
Credits from original thread:
Credits:
Flinny- Help with my first compile
Andromadus TM- the kernel
thewadegeek- Help with some compile errors
Fraux123- His dynamic file sync and more
ziggy- ck1 patchset
H3ros- smartassH3
engelmarkus- USB OTG(http://forum.xda-developers.com/show....php?t=1887073)
and Who i forgot..
Click to expand...
Click to collapse
Credits:
The Andromadus team for all their amazing work
kylon, for letting me release this kernel for you, and also for helping me with compiling and everything else!
Linaro, for their fantastic toolchain
All the above
RESERVED
reserved
Great Job! ill for sure be testing this out!
Thank you so much, this kernel looks very promising, will definitely test it out.
Update: It doesn't feel as fast as the original kernel, however the Mod kernel does give me 1MB(one) of additional user accessible RAM.
This could be flash over the 10.1 Andro or on the 4.2.2 AOSP?
Thanks
Kéno40 said:
This could be flash over the 10.1 Andro or on the 4.2.2 AOSP?
Thanks
Click to expand...
Click to collapse
It's originally for CM10.1, so I doubt it'll work with AOSP, especially due to the nature of the test builds (for this reason it's probably not compatible with build 20 or below either). That said, it's worth a try. I don't know if there are any mods of the AOSP kernel, I haven't got much experience so I probably couldn't mod it myself, but I'll look into it
sharptv said:
Thank you so much, this kernel looks very promising, will definitely test it out.
Update: It doesn't feel as fast as the original kernel, however the Mod kernel does give me 1MB(one) of additional user accessible RAM.
Click to expand...
Click to collapse
Thanks for the feedback, I would try out some of the included governors, there's quite a few! I personally find dyninteractive more responsive and smoother than the default SmartassH3.
HTCDreamOn said:
It's originally for CM10.1, so I doubt it'll work with AOSP, especially due to the nature of the test builds (for this reason it's probably not compatible with build 20 or below either). That said, it's worth a try. I don't know if there are any mods of the AOSP kernel, I haven't got much experience so I probably couldn't mod it myself, but I'll look into it
Thanks for the feedback, I would try out some of the included governors, there's quite a few! I personally find dyninteractive more responsive and smoother than the default SmartassH3.
Click to expand...
Click to collapse
I tried both kernels on perf governor like i always do, and the Mod kernel i significantly slower, for me at least. I suspect that it's due to the LZO compression.
Anyway, it's good to see another kernel Dev, i really appreciate your work and i look for ward to your next release.
good work:good:
if you need help just pm me and i ll try to help you as best as i can (even if i m a still a noob xD )
sharptv said:
I tried both kernels on perf governor like i always do, and the Mod kernel i significantly slower, for me at least. I suspect that it's due to the LZO compression.
Anyway, it's good to see another kernel Dev, i really appreciate your work and i look for ward to your next release.
Click to expand...
Click to collapse
He said this kernel is not using lzo and i don t think the kernel compression can affect the performances
it can only affect the boot/reboot/shutdown time
"more ram for us" is working because it is a generic tweak, every kernel/phone can have it
kylon said:
good work:good:
if you need help just pm me and i ll try to help you as best as i can (even if i m a still a noob xD )
He said this kernel is not using lzo and i don t think the kernel compression can affect the performances
it can only affect the boot/reboot/shutdown time
"more ram for us" is working because it is a generic tweak, every kernel/phone can have it
Click to expand...
Click to collapse
Thanks for pointing that out. I have reverted to the original kernel as the Mod kernel is really slow in comparison. The original kernel with the added CPU idle PM support has significantly increased my battery life.
sharptv said:
Thanks for pointing that out. I have reverted to the original kernel as the Mod kernel is really slow in comparison. The original kernel with the added CPU idle PM support has significantly increased my battery life.
Click to expand...
Click to collapse
That's an interesting point.
@HTCDreamOn, could you please share how did you enable that CPU idle PM feature?
sharptv said:
Thanks for pointing that out. I have reverted to the original kernel as the Mod kernel is really slow in comparison. The original kernel with the added CPU idle PM support has significantly increased my battery life.
Click to expand...
Click to collapse
NeverGone\RU said:
That's an interesting point.
@HTCDreamOn, could you please share how did you enable that CPU idle PM feature?
Click to expand...
Click to collapse
That's interesting :silly: not gonna lie, I didn't realise it would actually make a difference. In menuconfig, under CPU Power Management there's an option for CPU idle PM, right next to the Governor bit.
I'm personally finding the kernel alright in terms of speed, I guess I could try the latest Linaro tool chain and/ or look into some other kernel stuff, although I'm hardly an expert
HTCDreamOn said:
That's interesting :silly: not gonna lie, I didn't realise it would actually make a difference. In menuconfig, under CPU Power Management there's an option for CPU idle PM, right next to the Governor bit.
I'm personally finding the kernel alright in terms of speed, I guess I could try the latest Linaro tool chain and/ or look into some other kernel stuff, although I'm hardly an expert
Click to expand...
Click to collapse
Also, just to point it out. I think you have accidentally packed the Original kernel inside the Mod package.
Anyway, i'm looking forward to your next release, this kernel looks very promising, i think it just needs to be polished.
sharptv said:
Also, just to point it out. I think you have accidentally packed the Original kernel inside the Mod package.
Anyway, i'm looking forward to your next release, this kernel looks very promising, i think it just needs to be polished.
Click to expand...
Click to collapse
can't of done, the AndromadusMod is double the size of the original so I've definitely got them the right way round. thanks for the feedback though
Great Job!
sharptv said:
Also, just to point it out. I think you have accidentally packed the Original kernel inside the Mod package.
Anyway, i'm looking forward to your next release, this kernel looks very promising, i think it just needs to be polished.
Click to expand...
Click to collapse
You are right, inside the modded kernel update.zip you will also find another update.zip, wont do anything but just is why the package is so much bigger!
HTCDreamOn said:
can't of done, the AndromadusMod is double the size of the original so I've definitely got them the right way round. thanks for the feedback though
Click to expand...
Click to collapse
I was about to give the same answer but i see what he means, at first i was like how could it be double *scratches head* then i see you have two kernels packed into one! no bigge!
oh and so far nice performance running smartassH3, this is great stuff!!!
i just got done adding into the aroma installer if anyone would prefer, found here
http://forum.xda-developers.com/showthread.php?t=2194964
will be there from build 1.5.2 and beyond so happy flashing fellas!!
demkantor said:
You are right, inside the modded kernel update.zip you will also find another update.zip, wont do anything but just is why the package is so much bigger!
I was about to give the same answer but i see what he means, at first i was like how could it be double *scratches head* then i see you have two kernels packed into one! no bigge!
oh and so far nice performance running smartassH3, this is great stuff!!!
i just got done adding into the aroma installer if anyone would prefer, found here
http://forum.xda-developers.com/showthread.php?t=2194964
will be there from build 1.5.2 and beyond so happy flashing fellas!!
Click to expand...
Click to collapse
Oops my bad, must've been 'cause I packed it using terminal, and must have left the normal kernel.zip in the same directory. I'll try the new Aroma ASAP!
HTCDreamOn said:
Oops my bad, must've been 'cause I packed it using terminal, and must have left the normal kernel.zip in the same directory. I'll try the new Aroma ASAP!
Click to expand...
Click to collapse
Just to point out one more thing: I'm definitely getting stronger WiFi signal with the Mod kernel, I'm also getting less disconnects when using 802.1x networks.
I am gonna do a full wipe and try this kernel again, and hopefully i will get the speed advantage this kernel technically should offer me.
P.S would you be kind enough to compile the original kernel with CPU PM idle support and also force ac charge? Thanks SOOOO much in advance.
sharptv said:
Just to point out one more thing: I'm definitely getting stronger WiFi signal with the Mod kernel, I'm also getting less disconnects when using 802.1x networks.
I am gonna do a full wipe and try this kernel again, and hopefully i will get the speed advantage this kernel technically should offer me.
P.S would you be kind enough to compile the original kernel with CPU PM idle support and also force ac charge? Thanks SOOOO much in advance.
Click to expand...
Click to collapse
It already has CPU Idle PM support and I'll look into Force AC charge.
HTCDreamOn said:
That's interesting :silly: not gonna lie, I didn't realise it would actually make a difference. In menuconfig, under CPU Power Management there's an option for CPU idle PM, right next to the Governor bit.
I'm personally finding the kernel alright in terms of speed, I guess I could try the latest Linaro tool chain and/ or look into some other kernel stuff, although I'm hardly an expert
Click to expand...
Click to collapse
i can't understand how to enable cpu idle PM
zofox said:
i can't understand how to enable cpu idle PM
Click to expand...
Click to collapse
Haha no you don't need to, it's something I enabled in the kernel before compiling. You will only notice a difference when the device is sleeping, so try leaving your phone on (aeroplane mode if possible) overnight, and you should notice very small battery drain. Basically you don't need to do anything
===>INTRODUCTION<===
This is my personal kernel based off of ASKP. I cherry-picked a lot of custom commits from many big kernels. I'm new in development, so, any help whatsoever (commits, suggestions, logs, etc etc) would be greatly appreciated
releases will be as frequent as possible, as I'm gone for 7 hours of my day during weekdays.
****FEATURES****
using A.S.K.P as the base<- you get all the features of A.S.K.P+ more
linux kernel 3.101 WITH the Con kalivas patchset for improved performance
L3 cache overclock (116MHZ)
custom RAM OC setup (333MHZ/400MHZ/466MHZ)
gpu oc interface (307/384/512)
optimized CRC32 computing algorithem
optimized square root interger library
custom voltage setup,modified by me personally taking inspiration from the voltage's of other kernels,everything from the GPU voltage to the screen regulator has been tweaked
CPU overclock up to 1.7GHZ
multiple governors i have personally added (this is ALWAYS changing considering what jhonny/grarak/faux/bsmitty/Amperific/boype do to their governor,or what i personally decide to do)
some new IO schedulers have been added
EXFAT is added, 1.2.5 source from dorimanx
updated RWSEM to linux 3.14
numerous enhancements to SLUB including a update to the 3.3 version
MMC software updates/enhancements
GPU side enhancements
HUGEMEM setup (this is a arguement from me personally,the gnex is only a 720P phone,you cannot utilize 1080P with out screen,so even if this is a retarded and dirty hack,i want to use the extra available ram)
ALL kernel logging has been disabled for a increase in speed
Kernel SamePage merging has been updated to linux 3.6 standards with faux's check page patch for improved performance and efficiency
memory Compaction updates for better performance
modified screen colors
imsoyen's SmartReflex 1.5 tuning interface
updated thermal framework drivers from faux & omapzoom
updated android binder.c from omapzoom's 3.8 branch that bsmitty discovered
updated logger from poondog,linux 3.9
graphite and link time optimizations including -o3 and hard float point with NEON with the latest linaro 4,9.1 toolchain from christopher83,compiled with graphite ops on gpu code along with -o3
zcache,zsmalloc and zram updated to linux 3.11 from mpokang kernel with faux's setup for zram
many misc enhancements from AK kernel
many misc OMAP enhancements
the latest WIFI drivers WITH a working hotspot
a modified anykernel zip package that will install a new HOSTAPD binary for working wifi hotspot and new meda_profiles.xml to fully disable 108PTHIS KERNEL USES VERY HIGH CLOCK SPEEDS WITH VERY LOW VOLTAGES,I BUILD THIS KERNEL THROUGH A "PERSONAL" SETUP,IF YOU GET SOD'S/ FREEZES,PLEASE UP YOUR VOLTAGES ON "MPU" BY 25 UNTIL THEY STOP :3
IF YOU'RE GOING TO USE A HOTPLUG GOVERNOR, FOR ALL THAT IS HOLY DO NOT USE MULTICORE POWER SAVING WITH IT. THIS CAUSES ISSUES AND NO BUG REPORTS ARE ALLOWED IF YOU HAVE HOTPLUG WITH MCPS
BUILDS:http://patty.mbqdevelopment.com/Kernels/ASKP Remix/ <- the numbers are going to be in order,the bigger the better XD (thanks to mbq for the generous hosting site,or as i like to call him,"big brother" thanks man :good: )
-------------------------------------------------------------------------------------------------------------------------
ALL CREDITS TO THE FOLLOWING
bsmitty83 <- i seriously use all of his commits that i possibly can,go thank him when you get the chance and try his kernel!
franciscofranco<-franco is franco. you all know what he can do.
amperific<i used his kernel for a base,without him,this wouldnt be here :good: give the original a shot when you get the chance!its much cleaner
grarak<lots of his fixes,and thanks to him ive learned alot
Ezekeel<ezekeel. nothing else needed.
tFrost<his great Rom Directory app that can download kernel updates (http://forum.xda-developers.com/gal...ctory-3-14-t2681305/post51078192#post51078192)
burstlam<i use his backports all through the kernel
edoko<alot of his air kernel stuffs helped this kernel alot
faux123<its faux.
ak<he has ALOT of code in this kernel.
imoseyon<interactive x
metalspring<his toolchain is bomb :good:
morfic<color controls
boype<its boype,nothing less to say.
aosp<mr smarty pants
pianistaPL (he wrote most of the original OP for me)
milojoseph (he told me to make the thread)
MBQ_ (his music takes headaches away) ((https://soundcloud.com/mbq-1)) (((he re-wrote the OP for me for spelling fixes and organization)))
poondog (used alot of his stuff for memory)
jhonnyx<-i use every commit of his that works
you! the users! for testing and adding ideas!
and many many more!
GITHUB: https://github.com/pattyboi/kernel_tuna/
CHANGELOG: https://github.com/pattyboi/kernel_tuna/commits/milestone[/CENTER]
good to know you're working on a kernel! keep it up!
jhonnyx said:
good to know you're working on a kernel! keep it up!
Click to expand...
Click to collapse
thanks man,means alot! really do appreciate the support!
Flashing it as I type
Will report soon, it's good to see new kernel from people in this gnex threads
Edit: got my first freeze, lol. Maybe the voltages are too low, I guess?
But I got a couple questions:
1. Did you intended to UV voltages, including IVA? I see it lower than DirtyV and Franco.
2. The frequency steps..... There's a lot of it, but is it correct? There are numerous voltages that are new to me lol like 460, 1480, 1560...
Maybe you could explain just a little bit lol
Edit2: pattyboi did you implemented early suspend on interactive? There's a slight lag when waking up the device
Btw there's pegasusq, too.
This is how it starts you are now entering the Linux twilight zone of the quest for the best kernel patches go get em @pattyboi:)
@aosp you're a veteran
Sent from my Galaxy Nexus using xda app-developers app
@pattyboi:)
Thanks, bro! It looks nice. Do you maybe know how to add to this kernel 85MB Ram (to make SuperRAM version)?
ahmadairfan said:
Flashing it as I type
Will report soon, it's good to see new kernel from people in this gnex threads
Edit: got my first freeze, lol. Maybe the voltages are too low, I guess?
But I got a couple questions:
1. Did you intended to UV voltages, including IVA? I see it lower than DirtyV and Franco.
2. The frequency steps..... There's a lot of it, but is it correct? There are numerous voltages that are new to me lol like 460, 1480, 1560...
Maybe you could explain just a little bit lol
Edit2: pattyboi did you implemented early suspend on interactive? There's a slight lag when waking up the device
Btw there's pegasusq, too.
Click to expand...
Click to collapse
sorry for the late reply bud,i fell asleep after getting that 2nd build up. the 460 is gonna be removed,as i said im still nooby and i didnt add it right :silly: the rest should be correct as i didnt touch any other one,the uv voltages were just burstlams slight uv on regulators,i havent touched anything with iva,mpu or anything else,ill probabaly bump them up a lil within the nest couple days still gotta wrap my head around how to properly do it lol. but thank you for testing man! & yeah the interactive early suspend i "think" is there,is 7 am so im not entirely sure,if its causing wake lag i might try and switch the interacitves or just remove early suspend,like i said its a big mess i gotta iron out
EDIT ,one more thing,did you disable eco mode? that might cause wake delay because it was for me
pianistaPL said:
@pattyboi:)
Thanks, bro! It looks nice. Do you maybe know how to add to this kernel 85MB Ram (to make SuperRAM version)?
Click to expand...
Click to collapse
i will work on that for the next couple days! im still a noob so dont get your hopes up,but ill try man
aosp said:
This is how it starts you are now entering the Linux twilight zone of the quest for the best kernel patches go get em @pattyboi:)
Click to expand...
Click to collapse
thanks for the support man , if you ever can work some of your magic with amazing pullin up amazing commits,ill be very very grateful
as if i didnt spam the thread enough lol,we got a update! remove 460mhz due to it being added incorrectly,add fifo and fixes for it from ak's kernel,itll be up in 3 minutes!
pattyboi:) said:
as if i didnt spam the thread enough lol,we got a update! remove 460mhz due to it being added incorrectly,add fifo and fixes for it from ak's kernel,itll be up in 3 minutes!
Click to expand...
Click to collapse
Alright buddy you did it. Now all you gotta do is sit back and watch the thanks meter get higher than the post meter. Then you will be a certified guru.
pattyboi:) said:
i will work on that for the next couple days! im still a noob so dont get your hopes up,but ill try man
Click to expand...
Click to collapse
Thanks! You can always ask for help our amazing developers
I'm charging my phone and will install your kernel
DR3W5K1 said:
Alright buddy you did it. Now all you gotta do is sit back and watch the thanks meter get higher than the post meter. Then you will be a certified guru.
Click to expand...
Click to collapse
thanks man,the support really does mean the world for me
pianistaPL said:
Thanks! You can always ask for help our amazing developers
I'm charging my phone and will install your kernel
Click to expand...
Click to collapse
thats true man,ill prob talk to some of them tonight & thank you for giving it a shot
if you guys want,theres a latest build without early suspend,testing to see if it has anything to do with screen wake delay,its up on dropbox as i type
pattyboi:) said:
sorry for the late reply bud,i fell asleep after getting that 2nd build up. the 460 is gonna be removed,as i said im still nooby and i didnt add it right :silly: the rest should be correct as i didnt touch any other one,the uv voltages were just burstlams slight uv on regulators,i havent touched anything with iva,mpu or anything else,ill probabaly bump them up a lil within the nest couple days still gotta wrap my head around how to properly do it lol. but thank you for testing man! & yeah the interactive early suspend i "think" is there,is 7 am so im not entirely sure,if its causing wake lag i might try and switch the interacitves or just remove early suspend,like i said its a big mess i gotta iron out
EDIT ,one more thing,did you disable eco mode? that might cause wake delay because it was for me
Click to expand...
Click to collapse
Take it easy bud, we're all here learning as well lol
Yeah I'm not using eco mode and intelli-plug, not liking the less-snappier feel lol.
You could take interactive from either bsmitty's or Franco's, I think they're making out the best interactive so far. :good:
Also, this kernel has GPU governor. Is it overclocked as default?
Btw, I'm suggesting to do some wrapping on your OP. Because your kernel has many features inside lol :laugh:
Thanks!
ahmadairfan said:
Take it easy bud, we're all here learning as well lol
Yeah I'm not using eco mode and intelli-plug, not liking the less-snappier feel lol.
You could take interactive from either bsmitty's or Franco's, I think they're making out the best interactive so far. :good:
Also, this kernel has GPU governor. Is it overclocked as default?
Btw, I'm suggesting to do some wrapping on your OP. Because your kernel has many features inside lol :laugh:
Thanks!
Click to expand...
Click to collapse
I'll switch em out soon GPU us at the actual original clock.(384 or around that) I'm gonna try and get the sysfs thing for the oc set up today,was being a pain the other day,I'm not good with op's but I'll try
pattyboi:) said:
I'll switch em out soon GPU us at the actual original clock.(384 or around that) I'm gonna try and get the sysfs thing for the oc set up today,was being a pain the other day,I'm not good with op's but I'll try
Click to expand...
Click to collapse
I can make good OP in few minutes Will back
---------- Post added at 03:37 PM ---------- Previous post was at 03:20 PM ----------
Test OP:
INTRODUCTION
This is my personal kernel based of ASKP Kernel. I cherry-picked a lot of custom commits. I'm new in development so every help from developers and users will be great.
FEATURES
ASKP Haste+ as base
graphite and lto optimizations
metalsprings custom toolchain - Linaro 4.7.4
dirtyv commits
rcu updates
intelliplug
pvr governor's
zRAM
high perfomance sound
slight regulator undervolt
oc up to 1.6 ghz
smart reflex class 3 only (the switches in trickster dont work because you cannot adjust sr class 3)
some schedulers i use
some govs i use/like
fastcharge
eco mode
screen specific controls of course
updated thermal drivers
ion updates
700mb ram for user
voltage controls
exfat suppourt
ALL DOWNLOADS
https://www.dropbox.com/sh/z43idai19erzu2n/1NZ69_Jeo3
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ALL credits go to:
bsmitty83
franciscofranco
amperific
grarak
Ezekeel
burstlam
faux123
ak
imoseyon
metalspring
morfic
boype
and many many more!
GITHUB: https://github.com/pattyboi/kernel_tuna
CHANGELOG: https://github.com/pattyboi/kernel_tuna/commits/milestone?page=1
pattyboi:) said:
thanks for the support man , if you ever can work some of your magic with amazing pullin up amazing commits,ill be very very grateful
Click to expand...
Click to collapse
Firsties kill the vmsplit stock is optimal even boype knows
defconfig: 3G/1G vmsplit (tuna default) · ecf4b67 · boype/kernel_tuna_kk44 · GitHub - http://goo.gl/PXCfEo
Hello guys i hate long OPs. So lets keep it small.
This kernel is designed for sultanxdas 7.1 rom!
Current features:
* francos thermal driver tuned to work with the VADC sensor (more accurate throttling results)
* powerd my cpuquiet
* removed sultans underclock
* reduced voltages
* many io schedulers
* power effcient workqueue (better idle drain)
* some small tweaks for better battery and better standby
* more incoming
If you like my work press the thx button or consider a small donation
Download Here:
https://www.androidfilehost.com/?w=files&flid=206433
XDA:DevDB Information
Private Kernel, Kernel for the OnePlus One
Contributors
DerRomtester, DerRomtester
Source Code: [url]https://github.com/DerRomtester/android_kernel_oneplus_msm8974[/URL]
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: r2
Stable Release Date: 2017-08-13
Created 2017-07-16
Last Updated 2017-08-13
Reserved
Fast charge?
This space for sale
Sent from my A0001 using XDA-Developers Legacy app
Forgot to disable mpdecision. Please disable it in Kernel Adiutor. Fixed next version.
No voltage control!
pankspoo said:
No voltage control!
Click to expand...
Click to collapse
Not yet A copy and paste mistake from my other thread.
Edit.
Reuploded and fixed my hotplug mistake.
Great to see your CAF kernel again
Why Franco thermal driver is better than sultanxda one?
ab123321 said:
Why Franco thermal driver is better than sultanxda one?
Click to expand...
Click to collapse
I just spent alot of time on that so i prefer this thermal driver.
If you like Franco's work perhaps you might also like his hotplugging mechanism as an option ? Four cores when screen is on give me great performance and when underclocked or undervolted phone stays cool and battery is great! I miss this option sooo much on Sultan's ROM.
Will this work on RR sultanxda version
Sent from my A0001 using XDA-Developers Legacy app
One request has it kexec hardboot patch
[email protected] said:
One request has it kexec hardboot patch
Click to expand...
Click to collapse
No, because last time i tried it, it broke encryption.
FunkyRasta said:
If you like Franco's work perhaps you might also like his hotplugging mechanism as an option ? Four cores when screen is on give me great performance and when underclocked or undervolted phone stays cool and battery is great! I miss this option sooo much on Sultan's ROM.
Click to expand...
Click to collapse
Yeah why not. In guess this produces a lot of heat. Lets see i am gonna check that out.
DerRomtester said:
Yeah why not. In guess this produces a lot of heat. Lets see i am gonna check that out.
Click to expand...
Click to collapse
I thought so too. Maybe it is true when running CPU not underclocked because then it still jumps to max freqs despite there is no need for it. But when you cap your CPU to 1.9 GHz in Kernel Adiutor or sth it is whole other world. Performance is more consistent due to no hotplugging penalties and phone gets no hotter than usual because voltages below 2 GHz are much lower and load spreads nicely on all four cores which futher prevents frequency ramping.
Believe me, I was sceptic of it before too
Glad to hear you want to try it man! Thanks
Nice to see u're back with a kernel for Sultan's or Sultan based ROMs!
---------- Post added at 03:57 PM ---------- Previous post was at 03:47 PM ----------
DerRomtester said:
Edit.
Reuploded and fixed my hotplug mistake.
Click to expand...
Click to collapse
Uhm.. that hotplug we should disable, it's still active...
Please add:
1. Bricked hotplug
2. Battery charge control
3. Lionheart governer
ashutoshmn said:
Please add:
1. Bricked hotplug
2. Battery charge control
3. Lionheart governer
Click to expand...
Click to collapse
Kk
ab123321 said:
Why Franco thermal driver is better than sultanxda one?
Click to expand...
Click to collapse
Less aggressive with ramping down cpu, frequencies, it isn't "better" it depends on your usage, it's more like to prefer it to sultan's