UPDATE: I really no longer have the time to update the custom kernels, I now work 16 hours days, 5-6 days weekly. With travelling time added, I barely have time to sleep.
Battery optimization is about choosing the right rom, tuning cpu governor interactive, disabling Google Play Services (use microG & tune GCM), forcing doze immediately, disabling ads, using black/white screen, app optimization (disable analytics, instant messaging), plus many other things.
Identify the rom, the base (aosp or lineage), can choose to use any of the kernels below if it is based on the same base. A backup of your original rom's kernel is in the rom.zip file, simply extract it and restore if encounter any problems.
I have created a guide here
(Please don't quote the original 1st post when replying, as everything is in progress, not written yet,
Please don't ask for ETAs, I'm only doing this in my limited spare time, thank you)
My kernels are NOT flash-and-forget, please READ through post #1, then CONFIGURE using Kernel Adiutor Mod (see post #2)
IMPORTANT DISCLAIMER
I bear no responsibility towards any malfunction of your device. Use my kernels at your own risk.
I do NOT own any of the devices below, so I could not flash/test any of the kernels
BACKUP YOUR PARTITIONS!!!
Before attempting to flash any kernel/rom, backup your critical partitions! It's meaningless to ask for help when disaster strikes. Follow the links below, root is required.
Partition Dump - Complete STEP 1
Partition Backup by wanam (save as both .img & tar.gz, plus the 1st 100MB - see 'spanner tool')
There's no need to backup the System or Data partition if you just want to backup the partitions only. But backup your SDCard if the rom got problems with it.
Credits & Thanks
abhishekr700 | source
kaankulahli | source
For Z00ED & Z00RD variants only, meaning these kernels are for Asus Zenfone 2 Laser models
- ZE500KG
- ZE500KL
Change Log (v06 SDCard fix)
v06
added SDCard Filesystem support
v05
added cpu hotplug: autosmp
v04
added USB Fast Charge, credits to @ENGstk
v03
removed CRC Check for 30% Performance Boost
v02
added SeLinux: Set to permissive
v01
added tcp-algorithm: westwood (default), bic, htcp, hstcp, hybla, vegas, scalable, lp, veno, yeah, illinois
added memory: samepage merging, frontswap, cleancache
added filesystem: ntfs
added config: kernel config.gz can be found at /proc
removed hotplug: msm performance
removed cpu: touch boost
v00
same as stock boot.img from rom
DOWNLOAD
Unzip, copy to phone, then flash kernel via TWRP (select BOOT partition), re-flash SuperSU if you use it, reboot directly.
(Note: if you need to revert to original kernel, either use :
v00 of my kernel - its the same as your stock rom boot.img,
or extract boot.img from the rom)
If you use Magisk, refer to this thread 1st post - Installation Instructions, section "If you're not rooted, or something went wrong and you need a clean start"
Nougat
LineageOS-based AICP-12.1 Nougat, latest kernel is v06 for ROM aicp_Z00ED_n-12.1-NIGHTLY-20170301.zip
Kernel Source
After flashing kernel, configure using Kernel Adiutor Mod
reserved 02
reserved 03
reserved 04
pokipokipxorn said:
After flashing kernel, configure using Kernel Adiutor Mod
Click to expand...
Click to collapse
There is no cpu hotplug section on kernel adiutor mod
AltMailey said:
There is no cpu hotplug section on kernel adiutor mod
Click to expand...
Click to collapse
cpu hotplug on my device is there,bro ,
maybe u try download other version apk again
Adhe_88 said:
maybe u try download other version apk again
Click to expand...
Click to collapse
Which version? I use V15 version but still doesnt appear
Even on playstore version too
My phone is Z00RD
Where cpu hotplug ? :laugh: or not work at Z00RD ?
Where's the download link?
..
rawstar11 said:
..
Click to expand...
Click to collapse
v06
There is no CPU Hotplug in settings
It's Work only with aicp_Z00ED_n-12.1-NIGHTLY-20170301.zip? @pokipokipxorn
For Z00UD plz?.. z00t I'm using rr nougat
hi there,
on aicp 20170804 sd card can be seen only on file manager but other programs and also on windows mount only internal memory shown or mounted. any related on kernel?
thnx
Have you abandoned Z00LD kernel??
Related
THIS KERNEL IS NOW OBSOLETE, DON'T USE IT.
Mine newest and stable kernel releases are now integrated into my version of CyanogenMod 7.2, please use only a kernel provided with that ROM, not this one.
Im leaving it for historical reason or for some geeks
The testing release of kernel for p350 based on kernel by drapalyuk - taken from kernel and rom + sources
I do not take any resposibility for bricked devices!
This kernel aims to optimize the performance, responsivity and battery life so please share your opinion about these factors and your ideas.
If you are experiencing any problems with WiFi or 3G try much less tweaked but more stable LITE version.
Instalation:
Download zip to your phone
Get the Custom Recovery for p350
Reboot into recovery
Backup your boot partition (if you like risk you can ommit this step )
Choose Flash zip menu
Turn off verification (as I dont signed my kernel yet)
Flash downloaded zip
Reboot and enjoy
Changelog(2.6.32.48 version):
[0.4]
Fixed black screen after wakeup issue
Added vr and sio I/O schedulers (SIO is default)
Added smartassv2 governor
VM_MAX_READAHEAD changed to 512
[0.3]
Kernel version updated to 2.6.32.48
BFS CPU Scheduler
Applied few tweaks from https://github.com/arco/buzz-kernel-2.6.32/
Some other small tweaks (List of applied patches is on github)
Compiled with newest Linaro toolchain with -Ofast flag and tuned to our architecture
LITE version:
For all guys having problems with internet connection on my kernel there is a LITE version.
It contains less tweaks thant normal version but should not have problems with internet. This version is much less tweaked so it should be more stable.
What is in lite version:
Kernel version 2.6.32.9 (not updated)
Smartass v2 governor
SIO and VR IO schedulers (SIO as default)
VM_MAX_READAHEAD changed to 512
Compiled with newest Linaro toolchain with -Ofast flag and tuned to our architecture
If you dont have any problems with 0.4 version I reccomend NOT to install Lite version
DOWNLOADS
version v0.4: http://hotfile.com/links/139705983/d792c47/kernel-pax-0-4.zip.html
version Lite: http://hotfile.com/links/139705851/518d0ef/pax0r-kernel-lite.zip.html
SOURCE: https://github.com/pax0r/pecan_kernel
Thx for:
drapalyuk - for biggest work for this device
All other devs for Android kernel - as I can learn so much from all of your work!
Debuging Info
or how to help make it better
If you have any problems with my kernel and you want to help in some way - here it is some info how you can.
Just after apearing of the problem please get logs from your device.
How to do it:
Info on CM wiki how to get Logcat
http://wiki.cyanogenmod.com/wiki/Logcat
Info about getting kmesg:
Open Terminal Emulator (or shell with ADB if you know how)
Write the following commands:
Code:
su
cat /proc/kmsg > /sdcard/kmsg.log
There should be new file kmsg.txt on your sdcard. Copy it to your PC.
info about last kmsg after sudden reboot/crash
Same as for normal kmesg but the command now should be:
Code:
su
cat /proc/last_kmsg > /sdcard/last_kmsg.txt
Created file will be named last_kmsg.txt
Attach all logs to your post (prefered way is to use http://pastebin.com/
Of course if you have any programming skills you can tinker with my sources as you wish and send patches to me
Hi Pax0r,
I will test the new kernel!
Great, file not found
Sent from my Optimus Me using XDA App
thanks from the Philippines bro..
downloading it now.. will let you know how it goes..
edit : just booted up and already like it.. i had a problem with drape's rc3 kernel because everytime my phone went to sleep and i would wake it up, the screen would just stay black and the buttons would light up and i would have to touch the screen for it to turn on.. now that problem is history!!! thanks paxor!!!!
SikatPimp said:
edit : just booted up and already like it.. i had a problem with drape's rc3 kernel because everytime my phone went to sleep and i would wake it up, the screen would just stay black and the buttons would light up and i would have to touch the screen for it to turn on.. now that problem is history!!! thanks paxor!!!!
Click to expand...
Click to collapse
i still experience that problem. well after the kernel's flashed, does that mean it will run the next time the phone's booted up?
downloading...
edit:screen stays black like before..
uploaded to mediafire
Daryll99 said:
Great, file not found
Sent from my Optimus Me using XDA App
Click to expand...
Click to collapse
here..i uploaded it to mediafire. enjoy
www . mediafire . com/ ?l5cqpdhvi8c8acw
ikazu said:
i still experience that problem. well after the kernel's flashed, does that mean it will run the next time the phone's booted up?
Click to expand...
Click to collapse
ok i just got excited. it seems i still get the touch screen problem but it happens less frequently now and right now i am also cruising at 825 mhz with no fc yet !!!
SikatPimp said:
ok i just got excited. it seems i still get the touch screen problem but it happens less frequently now and right now i am also cruising at 825 mhz with no fc yet !!!
Click to expand...
Click to collapse
tried playing games with 825 freq?
---------- Post added at 05:23 AM ---------- Previous post was at 05:21 AM ----------
on screen animation dsnt work either
Thx for feedback.
I also noticed the 'black screen issue' sometimes and working on it. Drapalyuk fixed it in CM but its not in his sources :/
What versions of ROM (CM, 2.2 etc) do you use?
only angry birds... can't tell any difference but still no fc
---------- Post added at 02:17 PM ---------- Previous post was at 02:08 PM ----------
I'm using drape's 20.10 rom... and before i would reflash to try and get that black screen took care of but in a couple days it would come back.. and it isnt so bad.. it doesn't really effect anything.. but after flashing your kernel i am getting them less now so thats a plus..
So you know How to compile the kernel
will you try to add more features ???
can you add these features
Code:
* shifted to TinyRCU kept it as default
* enabled support for various file systems
o EXT3
o EXT4
o JBD
o RFS
o JFS
o NTFS (with R/W)
* TUN/TAP now integrated into kernel
* enabled support for various network file systems
o NFS (client/server)
o CIFS
* optimized kernel for size
* enabled LZMA/GZ2/LZO compressing support for ramdisk
* bumped jHash to v3
* increased VM MAX READAHEAD to 512KB
* corrected "current kernel" string in CWM app & Tweaks app
* Universal CF-Root and CWM for I9003 Gingerbread by amit.bagaria
* CPU Governors
1. InteractiveX
2. Savaged-Zen
3. SmartAssV2
4. BrazilianWax
5. Smoothass
6. Lagfree
7. Smartass
8. Scary
9. MinMax
10. Interactive
* I/O Schedulers
1. BFQ-v2-rc1
2. V(R)
3. SIO
I flashed the kernel and now everytime i try to turn on the wifi its says error, it wont turn on. And please fix the blackscreen issue.
Daryll99 said:
I flashed the kernel and now everytime i try to turn on the wifi its says error, it wont turn on. And please fix the blackscreen issue.
Click to expand...
Click to collapse
Maybe try flash again.
If it would not work I will check on this issue later.
There must be some problem with loading wifi module for your phone...
vivekkalady said:
So you know How to compile the kernel
will you try to add more features ???
can you add these features
Code:
* shifted to TinyRCU kept it as default
* enabled support for various file systems
o EXT3
o EXT4
o JBD
o RFS
o JFS
o NTFS (with R/W)
* TUN/TAP now integrated into kernel
* enabled support for various network file systems
o NFS (client/server)
o CIFS
* optimized kernel for size
* enabled LZMA/GZ2/LZO compressing support for ramdisk
* bumped jHash to v3
* increased VM MAX READAHEAD to 512KB
* corrected "current kernel" string in CWM app & Tweaks app
* Universal CF-Root and CWM for I9003 Gingerbread by amit.bagaria
* CPU Governors
1. InteractiveX
2. Savaged-Zen
3. SmartAssV2
4. BrazilianWax
5. Smoothass
6. Lagfree
7. Smartass
8. Scary
9. MinMax
10. Interactive
* I/O Schedulers
1. BFQ-v2-rc1
2. V(R)
3. SIO
Click to expand...
Click to collapse
I will try do as much as I can - thx for some kind of list of 'thigs I should look at'. Few comments I have:
About governors - there will be smartass v2 for sure in next version - I just hadnt time to integrate it in this release (I tested it earlier at it really was smartass )
I/O Schedulers - deadline is quite enough for sd cards, but I will look into this SIO as it is based on deadline - thx for hint. I think rest of them is not needed.
File Systems - do we really need support for them? More supported format means bigger kernel.
"optimized kernel for size" - I prefer optimize for speed and it is done
Thanks again for this list - looks very interesting
Havent find the Governer in the cyanogen Mod ??
do I have to use external apps to select that governer??
edit : wifi working Fine
vivekkalady said:
Havent find the Governer in the cyanogen Mod ??
do I have to use external apps to select that governer??
edit : wifi working Fine
Click to expand...
Click to collapse
The governor does not come with the cyanogen mod ofLG p350. No you can't use external apps to install that governor,assuming it is smartass
Sent from my Optimus Me using XDA App
pax0r said:
File Systems - do we really need support for them? More supported format means bigger kernel.
Click to expand...
Click to collapse
It would be great if ntfs file system is supported as it is fast
Sent from my Optimus Me using XDA App
Daryll99 said:
The governor does not come with the cyanogen mod ofLG p350. No you can't use external apps to install that governor,assuming it is smartass
Sent from my Optimus Me using XDA App
Click to expand...
Click to collapse
I know that Dude
But we need external apps to select which Governer and I/O scheduler to be used even if it is in the boot.img. Not installing but selecting
no-frill app is used in my phone (i9003) it contains all the above items in the list i have specified earlier
Its from i9003 by doomload it contains all the things
https://github.com/DooMLoRD/SGS-SL-i9003
Hm... I can select governor from CM menu (performance -> CPU settings - not sure about english names ; ) but be aware of a fact that there is no smartass here (yet ), just standard ones (ondemand,usersapce,powersave,performance)
Sadly your kernel from i9003 is .35 one an here we have .32 so patches do not apply so easy...
But when I will have more time (Im in the middle of Bsc thesis ) I will try to port some .35 kernel for p350
This is a kernel compiled from GT-I9505G sources and packed with MF8 initramfs.
I suggest to use it with one 4.2.2 Google Edition rom but is working good also with TW Samsung’s rom.
Is not something special, is a stock kernel i compile because i see some diffs between I9505 & I9505G sources..
Test kernel for Samsung XXUEMJ5 here.
----------------------------------------------------------------------------------------------------------------
@V1
Tested and working:
WiFi
Exfat with Samsung forced to load modules
Mtp
Insecure
Cache & dalvik cache it will auto deleted at installation of the zip.
----------------------------------------------------------------------------------------------------------------
@V2
V1+ Fixed:
Smart Screen on TW rom's.
Screen rotation on TW rom's.
Changes:
Ex-fat modules from android 4.3 leaked rom.
----------------------------------------------------------------------------------------------------------------
@V3
V1+V2+ Fixed:
Core0 MHz
Changes:
Added smart charging from Samsung source (More info)
----------------------------------------------------------------------------------------------------------------
@V4
V1+V2+V3+ Changes:
Updated Linux kernel to latest 3.4.52
Disable Gentle Fair Sleepers (Thanks @broodplank1337)
Disable rooting restrictions (Just in case. Forgot it before..)
Disable all debuggers (Seems unneeded and by disabling those gives better battery life)
----------------------------------------------------------------------------------------------------------------
@V6
V1+V2+V3+V4+V5(test)+ Changes:
Enable CPU under clock (Thanks @ktoonsez)
Removed lot of dmesg log spams (Better battery?) (Thanks @faux123)
Add voltage control (Thanks again @faux123)
GPU OC (Thanks again @faux123)
Added Convervative ConvervativeX and intellidemand governors (Thanks @broodplank)
----------------------------------------------------------------------------------------------------------------
@V7
V1+V2+V3+V4+V5+(test)+V6+ Changes:
Fixed GPU overclock and added {128-200-320-400-450-533-600} Frequencies (Thanks to Talustus) default is 450.
----------------------------------------------------------------------------------------------------------------
@V11
Changes&New thinks:
Updated Linux kernel to latest 3.4.54.
Reworked from scratch CPU OC - UC - VD. (Many thanks to @ktoonsez))
All cores runs at frequencie you set.
(That is very important and you can chek it with kernel tuner app from playstore)
All cores runs on ondemand governor.
(That is also very important and you can again check it with kernel tuner app from playstore)
Added faux sound control (Thanks to @faux123 for his work)
Added kthermal and auto_hotplug. "mpdecision is not works because auto_hotplug take his place if you whant to completly remove mpdecision you can rename /system/bin/mpdecision to mpdecision.back but if you change to other kernel do not forget to rename the file". (Thanks again to @ktoonsez))
Max CPU OC @ 2160000. (I dont need more)
GPU OC steps 128/200/320/450/600 (Disable some frequencies because of the new method ktoonsez use to OC, all apps except his app doesn't want to set anything).
Added Fading-led mod and it is working with everything, Missed call-sms user apps etc...
Disabled Gentle Fair Sleepers.
Enable Fat/MSdos/Vfat and Ntfs(as module) File systems (Thanks to @ktoonsez))
Added CIFS as module.
Ioschedulers: row-bfq-noop-deadline-fiops-sio-vr-zen-fifo-cfq.
Added fast charge.
Other mini thinks that i dont remember now...
----------------------------------------------------------------------------------------------------------------
@V13
Updated Linux kernel to latest 3.4.55.
Added an option to app to control the led (Fade - non fade - speed)
Added an app to manage some basic kernel features based on scripts thanks to HM.Carbide.
Created a new function called set_cpu_min_max which will set the cores specified using a workqueue. (Many thanks to ktoonsez)
Fixed Screen-Off Mhz function. (Now is working)
Auto-Hotplug enabled by default.
NoteThe app and his scripts is on alpha stage need to add more)
----------------------------------------------------------------------------------------------------------------
@V14
A small update..
Updated Linux kernel to latest 3.4.59.
Fixed power ON while charging.
Fixed charging led notification.
Removed force loaded exfat modules code and added exfat modules 1.2.4 compiled from source. (Thanks samsung)
Probably fixed random restarts.
Other changes for better stability and performance.
More to come....
----------------------------------------------------------------------------------------------------------------
@V15
Compiled with latest GCC 4.7 toolchain (Thanks to faux)
Added CPU governors: abyssplugv2 - adaptive - asswax - badass - dancedance - intellidemand - smartassH3 and wheatley. (Thanks to ktoonsez)
Added GPU governor: Simple (Thanks to faux)
Fixed app doesn’t load user settings after restart.
Added thermal control tweaks to app.
Added faux sound control tweaks to app. (Thanks to faux for sound control driver)
Added a function to auto backup efs to /sdcard/ausdim-kernel-data. (For safe)
Added a function to copy last_kmsg to /sdcard/ausdim-kernel-data. (For helping me)
Reworked whole app with other mini changes and now is fully working.
Other mini kernel changes for better stability and performance.
Note: Before flash the kernel please delete manually init.d scripts from /etc/init.d/ folder or by the Ausdim kernel manager app.
----------------------------------------------------------------------------------------------------------------
@V16
Fixed charging when device is off.
Fixed app re-installation after restart.
Fixed set minimum throttle mhz at app.
Removed some ondemand tweaks added at v15.
Removed wipe /cache and /dalvik-cache from the updater-script.
Thanks and sorry for that quick update.
Note1:The app is inside on ramfs at boot.img and is auto installed/update if it's needed or not allready installed when device reboot to os.
Note2: Before flash the kernel please delete manually init.d scripts from /etc/init.d/ folder or by the Ausdim kernel manager app.
----------------------------------------------------------------------------------------------------------------
@V17
Compiled with latest gcc 4.8 and -o3.
Cifs 4.2.x fix. (Now we have cifs tested and fully working. Thanks @andreasy for notice that and report it also thanks @mkasick for the actual fix)
Fixed that damn lag. (Huge thanks @nfsmw_gr for thousands tests and suggestions)
Reworked led notification driver.
Disable multicast on suspend. (Save battery if to many users is on same network. That damn wlan_rx_wake wake locks. Thanks @pi-xel to note that)
Latest linux kenrel 3.4.61.
Added zram as module.
Added dynamic sync control. (Thanks to @faux)
Added ktoonservativeq cpu governor. (Thanks @ktoonsez)
Added sysfs to make Gentle Fair Sleepers configurable via app.
Added some zram and swappines settings at my app (Thanks @nfsmw_gr) if you want more then you can use Turbo-Zram. (Thanks @rlorange)
Added Android Logger switch trough App. (Thanks @wanam)
Added a Knox security removal. (Thanks @wanam)
Kernel compression: xz (To reduce zimage size)
Some others here and there...
Note1:The app is inside on ramfs at boot.img and is auto installed/update if it's needed or not already installed when device reboot to os.
Note2: Before flash the kernel please delete manually previous init.d scripts from /etc/init.d/ folder or by the Ausdim kernel manager app.
----------------------------------------------------------------------------------------------------------------
@V18.1
This update is focusing to stability and performance.
Lot of changes time and reverts to be Completely Lag Free....
Latest Linux kernel 3.4.64.
Updated Tsp firmware (From MGG update3) You can check the current firmware by *#2663#
Updated Ssp firmware (From MGG update3) You can check the current firmware by *#2663#
Updated Wireless drivers (From MGG update3)
Zram no more loaded as module and has now 4 disks default.
Zram can now be disabled via my app.
Other thinks that i don't remember....
Again many thanks @nfsmw_gr and @pjbuser for trying many test kernel's
----------------------------------------------------------------------------------------------------------------
@V19
This update is focusing to stability and performance.
Latest Linux kernel 3.4.66.
Fix random reboots. (Need test)
Disabled ktoonsez auto_hotplug and add intelli_plug with eco mode by faux.
Many thanks @all for testing and patience.
----------------------------------------------------------------------------------------------------------------
Tip:
If for some reason after set extremely settings you cant boot then you have to run aroma file explorer from CWM recovery and delete the responsible script at /etc/init.d folder.
If for some reason you lost root after flashing my kernel then you can simply download Chainfire's UPDATE-SuperSU-v1.51.zip and install it via CWM like you did with the kernel.
You can use Trickster MOD Kernel Settings from playstore to under clock and play with voltages governors and gpu.
Millions of thanks to:
@nfsmw_gr (For helping me with the scripts/debug/tests realy great man)
@pjbuser (For many tests and suggestions)
@broodplank1337 (for his great help about git-hub really great and friendly developer) and @ktoonsez for his great work and
@faux123.
Source code:
https://github.com/ausdim/GE-Edition-I9505-jfltexx
.:.I you want to Donate me.:.
Make me a flashable ZIP
jamal2367 said:
Make me a flashable ZIP
Click to expand...
Click to collapse
Uploaded here...
Thank's
Thanks
i've flashed deodexed and not google edition's rom but i've problems with wifi... can i flash this? i come from MEA...
MTP working?
coolpix90 said:
i've flashed deodexed and not google edition's rom but i've problems with wifi... can i flash this? i come from MEA...
Click to expand...
Click to collapse
The kernel is compiled from 9505G sources.
Wifi is working.
If the wifi is not working in your device try to change the rom.
Thank's
ausdim said:
The kernel is builded from 9505G sources.
Wifi is working.
If the wifi is not working in your device try to change the rom.
Thank's
Click to expand...
Click to collapse
From which kernel did you take the ramdisk from?
I didn't find any i9505G Stock Kernel
nolinuxnoparty said:
From which kernel did you take the ramdisk from?
I didn't find any i9505G Stock Kernel
Click to expand...
Click to collapse
As i said to the first post the kernel is builded from I9505G sources released by Samsung and is packed with MF8 ramdisk.
Thank's
ausdim said:
As i said to the first post the kernel is builded from I9505G sources released by Samsung and is packed with MF8 ramdisk.
Thank's
Click to expand...
Click to collapse
therefore i need to go to MF8 then install GE rom and then your kernel right?
Flashed it but system wouldn't boot. Cleaned cache and dalvik and reflashed and now it boots.
You have to wipe cache and dalvik before or after flashing this.
---------- Post added at 12:28 PM ---------- Previous post was at 12:19 PM ----------
Oh... my....god! This kernel is magical! With ktoonsez kernel, I had roughly 15k i Antutu, but now I have 24k! Not that it means a whole lot but still. I'm stumped.
Theshawty said:
Flashed it but system wouldn't boot. Cleaned cache and dalvik and reflashed and now it boots.
You have to wipe cache and dalvik before or after flashing this.
---------- Post added at 12:28 PM ---------- Previous post was at 12:19 PM ----------
Oh... my....god! This kernel is magical! With ktoonsez kernel, I had roughly 15k i Antutu, but now I have 24k! Not that it means a whole lot but still. I'm stumped.
Click to expand...
Click to collapse
Thank's for that note..
ZIp reuploaded at first post and it will clear cache and dalvik.
Thank's
ausdim said:
Thank's for that note..
ZIp reuploaded at first post and it will clear cache and dalvik.
Thank's
Click to expand...
Click to collapse
This kernel's pure magic, mate! :good:
Not just the Antutu score is higher, things generally feel a lot more snappier now!
My S4 Google Edition is much better now, better temperature, is fresher now.
Thanks
I have also installed and working good and mtp working.
The camera with this kernel works fine?
felipepx said:
The camera with this kernel works fine?
Click to expand...
Click to collapse
Dude, really sorry but are you some kind of bot / complete moron? You've asked that exact question in basically every thread I've come across since yesterday. They all work, besides some auto-focus issues with night scene mode, which is rom-related I suppose.
slind said:
Dude, really sorry but are you some kind of bot / complete moron? You've asked that exact question in basically every thread I've come across since yesterday. They all work, besides some auto-focus issues with night scene mode, which is rom-related I suppose.
Click to expand...
Click to collapse
I'm just asking myself referring to these problems that were appearing since yesterday, I asked wondering if with this kernel everything is ok or if the problems continue ...
ausdim said:
This is a kernel compiled from GT-I9505G sources and packed with MF8 initramfs.
I suggest to use it with one Google Edition rom.
Is not something special, is a stock kernel i compile because i see some diff's between I9505 & I9505G sources..
Tested and working:
WiFi
Exfat with samsung forced to load modules
Cache & dalvik cache it will auto deleted at installation of the zip.
Thank's
Click to expand...
Click to collapse
Thanks.
Camera working fine here.
update: 10-dec-2013 Dmore-kernel-rev03-BM.Tar or CWM version with 367 MB available RAM
Why this GB Kernel for our old I9000 device ?
Answer: I still use this old device and i developed a new DMORE 3.6 ROM (link);
So I take some time for build this kernel and now i finally condivided with you; After a year with Cyanogen Jellybean, I turned back with GB: I re-love the amoled bright screen, the stock Samnsung Camera performances, but above all , the low battery drain !!!
Of course, Performances are not equal to a Galaxy S2 or a younger devices but for all people that do not have the possibility to change phone, this my work could help them !!
I merged Stratosk, Hardcore, Mialwe git's repositories and the last official Samsung GB Kernel release (GB_Update3) for all roms based on stock JW5/6/7/8/9/B firmware;
I continued thier hard work with my little knowledge and skill and now i condivided it with you.
NOTE: This Dmore Galaxy S-i9000 kernel can used as base with your ROMs if you like.
I personally tested it with different devices using also other kernels;
OVERVIEW – DMORE.Kernel#rev03 GingerBread GT-I9000 Galaxy S Device
- Based on latest GB Samsung base kernel (GT-I9000_Opensource_GB_Update3)
- compatible with all Samsung GT-I9000 GB ROMS (JW5/6/7/8/9/B based firmware)
- support for RFS and EXT4 partitions
- autoROOT, init.d support, su binary
- OverClock using script with recovery (1000MHz default – range 1300/1200/1.128/1000 Mhz)
- User Voltage control for CPU and Core
- backlightnotification (use*BLN Control), VoodooSound10 (use*VoodooControl)
- some tweaks, Useless debugging removed.
- for ADB users: adb shell remount
- All stock features are supported
- Tweaked ramdisk: optimized mount options & VM settings
- Compiled with last Linaro gcc 4.7.4 toolchain optimized by Christopher83, flags opt (-O3)
- I/O scheduler SIO / BFQ / Deadline / NOOP (default*SIO)
- Read ahead tweaks (512Kb cache)
- CPU governor tweaks:Governors – SmartassV2 (default), Ondemand, Smoove
- Kernel compression mode GZIP
- ARM RWSEM optimization*
- Added optimized CRC32,AES,SHA1 algorithms*
- CWM v5.0.2.7 Semaphore Recovery
- 364 MB - 367 MB available RAM (download Dmore.Kernel-revxx-BM version for 367 Mb)
- Reworked cpufreq driver. cpu states 100-200-400-800-1000/1128/1200/1300.
- automatic cleaning of old "su" binary and busybox (if you coming from Semaphore or Chainfire)
- busybox 1.20.2r2 linusyang
- hardcore gamma and RGB profile
DEFAULTS
CPU 1000Ghz by default, SmartassV2, SIO 512Kb .
For change IO Scheduler, Cpu Gevernor and for manage OC/UV use System Tuner app from PlayStore
https://play.google.com/store/apps/details?id=ccc71.pmw&hl=en
INSTALL
(Dmore-Kernel-RevXX-CWM.zip for installation with ClockWorkMode or DMore-Kernel-RevXX.zip Odin/Heimdall)
Flash from recovery using CWM files or flash extracted zImage using*Heimdall*or flash downloaded TAR archive with Odin*
For change Cpu Freqency clock simply install DMore-Kernel-CPUXXXX.zip (XXXX = 1000,1128,1200,1300)
Personally i use 1200MHZ like Freq CPU
Tips & Tricks:
If you want change the Cpu Frequency manually, you can also using Adb shell commands instead DMore-Kernel-CPUXXXX.zip CWM file.
Simply type this commands on a DOS/Linux terminal shell
adb shell
su
mount –o remount, rw /system
echo 0 > /system/dmore-cpufreq.conf #cpu= 1000Mhz
reboot
(for clocks CPU 1128,1200,1300 use echo 1, echo 2, echo 3
echo 1 > /system/dmore-cpufreq.conf #cpu= 1128Mhz
echo 2 > /system/dmore-cpufreq.conf #cpu= 1200Mhz
echo 3 > /system/dmore-cpufreq.conf #cpu= 1300Mhz )
DOWNLOAD (changelog @ post #2)
Link here: http://goo.im/devs/dmore/gt-i9000/gb-i9000-kernel
SOURCES
Github repository: https://github.com/dmore70/kernel-GB-I9000
THANKS
Big thanks devlopers and especially*mailwe(midnight kernel), stratosk(Semaphore Kernel),*hardcore (SpeedMod Kernel) ,*supercurio*(Voodoo),*neldar*(BLN) and everybody else developing Open Source software, helping or reporting, Christopher83 for optimizated Linaro *cross compiler toolchains suitable for Samsung S Phone.
NOTE: next week , monday i'll published the new GB DMORE.ROM
10-dec-2013 Added more free available RAM (367 MB) ----> download DMore.Kernel-rev03-BM
Amazing, an updated GB kernel has been needed for so long. Can't wait to try new rom. Well done
Sent from my LG-E975 using XDA Premium 4 mobile app
A captivate version, pls
Welcome back David, I've used your old DMORE GB ROMs & they were really good! It is amazing that there are still devs out there which believe in good old GB for a good old phone!
Thank you & cheers!
Thank fron kernel friend
Well done David! :laugh:
Waiting for Your new Rom.
Cool , a new GB Kernel.
A few weeks ago, me and Fishears was having this discussion about how nice it would be to have a new updated GB kernel.
You just provided a solution.
This kernel is based on JWB kernel source right ?
Also , if you have the source on github, I would like to tweak some governors for the best performance, I used this setup when running GB.
nchc said:
Amazing, an updated GB kernel has been needed for so long. Can't wait to try new rom. Well done
Sent from my LG-E975 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
For all people don't want wait until tomorrow for the tread ,following link where you can download the new DMORE3.6 ROMs + others useful my addons:silly: (simply install with CWM recovery)
Link: http://goo.im/devs/dmore/gt-i9000/DMORE3.6-NewRom
HoangTuBot said:
A captivate version, pls
Click to expand...
Click to collapse
Sorry , I have only Galaxy S devices in my hands
ts1506 said:
Cool , a new GB Kernel.
A few weeks ago, me and Fishears was having this discussion about how nice it would be to have a new updated GB kernel.
You just provided a solution.
This kernel based on JWB kernel source right ?
Also , if you have the source on github, I would like to tweak some governors for the best performance, I used this setup when running GB.
Click to expand...
Click to collapse
Yes kernel is based JW9-JWB kernel source; In this moment i'm uploading git repository;
Link here: https://github.com/dmore70/kernel-GB-I9000
I'm working for a new cpu-freq.c module where there are 5 different frequencies level (100-200-400-800-1000-1200MHZ) coming from CM10.1 github repository. Dmore-kernel rev03 use 4 different levels (stratosk kernel) , so it uses a higher battery drain; Actually I have a problem with /sys/devices/system/cpu/ directory governor interface , but i hope to solve it in the next days.
can i flash this over CM7 baseband i9000XXJVU
pryerlee said:
can i flash this over CM7 baseband i9000XXJVU
Click to expand...
Click to collapse
NO You can't
If you add fast charge support I'll kiss you
fishears said:
If you add fast charge support I'll kiss you
Click to expand...
Click to collapse
Ok I'll not add fast charge support :laugh::laugh: so you'll not kiss me.
The problem is only to have a little bit of free time for this my hobbies.
In any case if you suggest me some link where i can have more informations, I might try :silly:
davidmore said:
\
Sorry , I have only Galaxy S devices in my hands
\
Click to expand...
Click to collapse
I can be your tester
nice, I'm using Saurom right now, so this kernel will fit perfectly
How do I flash this with Odin? I don't see any .tar files in the download page
MIUI
I wish you could make a MIUI Gingerbread version or even better teach me how to do it my self
Could you made another version of your kernel with bigmem like in semaphore? (384.5MB - breaks 720p video recording, front camera pictures) I used to use this, when I was on GB.
midnight911 said:
Could you made another version of your kernel with bigmem like in semaphore? (384.5MB - breaks 720p video recording, front camera pictures) I used to use this, when I was on GB.
Click to expand...
Click to collapse
Added DMore.Kernel-rev03-BM.tar or CWM file
Here's Bigman(377MB - breaks 720p)
Here's more 3MB (364+3 = 367MB) - 720p video recording works
For 384 Mb i 'm searching on web the mach-aries.c good module
Ok... I've flashed this - DMore-Kernel-rev03-BM.tar - after reverting to stock rom from CM11 and now I am stuck in a bootloop... Any ideas?
LE: I reverted back to stock with Odin following this guide:
Step 1: Start Odin
Step 2:
a. Select PIT file as 's1_odin_20100513.pit'?
b. Select PDA file as 'PDA_DXJV9_Deodexed_Zipaligned.tar'?
c. Select PHONE file as 'PHONE_DXJV9.tar'?
d. Select CSC file as 'CSC_OLBJV9.tar'?
Step 3: Under Options: Check Re-partition, Check Auto Reboot and Check F. Reset Time
Step 4: Start the phone in the download mode
Step 5: Once ID:COM/phone is 'Added!!' click Start
Step 6: You will see a lot of red text after the flash is done, don't panic, just do a 'wipe data/factory reset' and reboot the device when done.
Step 7: Let the device boot all the way then turn it off.
Step 8: Re-enter Download Mode and re-flash only the CSC file [Step 2 d] without pit and without re-partition.
I had the files on my computer from previous revert. If anyone has the same issue and has trouble downloading all the files, just let me know.
Now, being back on stock I really want to try your KERNEL. Should I make sure of any steps before attempting to flash it with Odin as PDA? Thanks!
This is a kernel you can flash on any rom for amami, which uses the caf-based libraries and stock rom.
The most work on this was not done by me, this is more a package of work done by other people.
See the next post for installation instructions.
Features
- f2fs support
- cpuquiet cpu hotplug driver(disabled mpdecision automatically)
- lz4 support and lz4 kernel compression
- optional underclocking to 268 Mhz
- fiops i/o scheduler
- lcd color calibration support
- cpu undervolting support
- enabled zram
- faux123's sound control
- fastcharge support
- dynamic sync control by faux123
- '-Ofast'-optimizations
- 'proc/last-kmsg'
- vibration density sysfs interface
- TWRP recovery with f2fs support(stock-based only)
- [WIP] f2fs-compatible ramdisk(stock-rom only, for aosp-based check this
- init.d support(stock romonly, but already included in the most aosp-based roms)
- disabled ric service(stock only, not needed with aosp-based roms)
- prima wifi module
Issues
- exfat sdcards and usb storage can't get mounted
XDA:DevDB Information
MoshKernel-amami[aosp-based + stock], Kernel for the Sony Xperia Z1 Compact
Contributors
CoolDevelopment, faux123, DooMLoRD, FreeXperia, every android kernel developer
Kernel Special Features:
Version Information
Status: Testing
Current Beta Version: 0.3
Beta Release Date: 2014-09-08
Created 2014-07-16
Last Updated 2014-09-08
Reserved
How to configure cpuquiet
You can configure cpuquiet to the pefect use with your phone. You need root permissions and any shell, i. e. Terminal Emulator.
First run 'su' to get root permissions.
Change the minimum and maximum amount of online cpu cores:
Code:
file for max. amount of online cpus: /sys/devices/system/cpu/cpuquiet/cpuquiet_driver/max_cpus
file for min. amount of online cpus: /sys/devices/system/cpu/cpuquiet/cpuquiet_driver/min_cpus
Example:
echo 3 > /sys/devices/system/cpu/cpuquiet/cpuquiet_driver/max_cpus
echo 2 > /sys/devices/system/cpu/cpuquiet/cpuquiet_driver/min_cpus
The cpuquiet driver supports different governors, a bit like cpufreq governors. The governors which are currently present are: "runnable", "rq_stats", "load_stats", "balanced"
Find the best one for you by yourself
Code:
sysfs file: /sys/devices/system/cpu/cpuquiet/current_governor
Example: echo balanced > /sys/devices/system/cpu/cpuquiet/current_governor
Change the max screen-off cpu frequency and online cpus:
Code:
sysfs file for max. screen-off-freq: /sys/devices/system/cpu/cpuquiet/cpuquiet_driver/screen_off_cap
syfs file for max. screen-off online cpus: /sys/devices/system/cpu/cpuquiet/cpuquiet_driver/screen_off_max_cpus
Example:
echo 960000 > /sys/devices/system/cpu/cpuquiet/cpuquiet_driver/screen_off_cap
echo 1 > /sys/devices/system/cpu/cpuquiet/cpuquiet_driver/screen_off_max_cpus
Disable cpuquiet(and enable mpdecision):
Code:
sysfs file: /sys/devices/system/cpu/cpuquiet/cpuquiet_driver/enabled
Example:
echo 0 > /sys/devices/system/cpu/cpuquiet/cpuquiet_driver/enabled
start mpdecision #enable mpdecision
These settings only stick until you reboot. So better setup an init.d script, which applies your settings every boot.
If you aren't sure, what init.d scripts are, ask google.
Reserved
AOSP-based roms
The kernel for asop-based roms gets flashed using a special .zip, which only flashes zImage and dt. That means, there are no ramdisk-problems, which you didn't got before. The scripts inside the script are also modifying the ramdisk to don't have mpdecision enabled by default.
Installation
1. Flash the zip file through a recovery
Download
https://s.basketbuild.com/devs/CoolDevelopment/MoshKernel-amami/aosp-based/
Source: https://github.com/CoolDevelopment/MoshKernel-amami/tree/caf
Stock rom/Stock-based roms
Installation
1. Be sure you have an unlocked bootloader
2. Be sure you have installed busybox
3. Flash the zip file through a recovery
Download
https://s.basketbuild.com/devs/CoolDevelopment/MoshKernel-amami/stock-based/
Source: https://github.com/CoolDevelopment/MoshKernel-amami/tree/14.4.A.0.xxx
https://github.com/CoolDevelopment/MoshKernel-amami-stock-based-initramfs
Changelog
0.1
- initial commit
0.1.1
- revert back to row as default i/o scheduler
0.1.2
- update f2fs to current upstream
- replace Cyanogenmod branding with mine
- strip kernel modules, you don't need to download 30mb+ anymore
0.2
- removed intelliplug
- added cpuquiet cpu hotplug driver
- automatically disabled mpdecision(the scripts are modifying the ramdisk)
- fastcharge support
- '-O3'-optimizations
- lz4 support and kernel compression
- remove overclocking
0.3
- stock-rom support
. dynamic fsync control by faux123
- changed default configuration for cpuquiet
- prima wifi module for stock rom
- upstreamed f2fs commits from linux 3.17rc4
Any roms, Also cm11?
Inviato dal mio Xperia Z1 Compact
cicci0 said:
Any roms, Also cm11?
Inviato dal mio Xperia Z1 Compact
Click to expand...
Click to collapse
Yes
Whaa!! for CM based ROMs and Sony based ROMs!! that would be interesting,
also I like the idea of not having a ramdisk inside the zip, I'll probably use it for next releases of Pimped kernel,
And did you strip the kernel modules before putting them inside the zip??
the wlan.ko module is 43.5MB!! the kernel's zip is around 35MB!!!! that is alot.
BTW, great work, thanks for contributing again and again for our beloved device,
hope you the best:angel:
OmarEinea said:
Whaa!! for CM based ROMs and Sony based ROMs!! that would be interesting,
also I like the idea of not having a ramdisk inside the zip, I'll probably use it for next releases of Pimped kernel,
And did you strip the kernel modules before putting them inside the zip??
the wlan.ko module is 43.5MB!! the kernel's zip is around 35MB!!!! that is alot.
BTW, great work, thanks for contributing again and again for our beloved device,
hope you the best:angel:
Click to expand...
Click to collapse
I am sorry but it may not work on sony roms, you can try if you want. I didn't test it.
I did not even know that kernel modules can be stripped
Sent from my Xperia Z1 Compact using XDA Premium 4 mobile app
CoolDevelopment said:
I am sorry but it may not work on sony roms, you can try if you want. I didn't test it.
I did not even know that kernel modules can be stripped
Sent from my Xperia Z1 Compact using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Well yeah that is the problem, I'm kinda sure that you can't use the same kernel for Sony and AOSP based ROMs in the same time!!
so you should mention in OP or in title that this kernel is for AOSP based ROMs so that users don't get confused...
Also if you haven't searched and found out about the stripping, you can do it by executing this:
<dir-to-toolchain>/bin/arm-eabi-strip --strip-unneeded <dir-to-modules-folder>/*
of course the arm-eabi-strip part depends on what toolchain you're using.
Hopefully that would help.
Works on unofficial slimkat
Sent from my Xperia Z1 Compact using XDA Premium 4 mobile app
It also works great with this : http://download.mokeedev.com/?device=amami
ps: Always love to use the FauxSound Audio/Sound Control and FauxClock apps
Thank You !!!!
:good:
Version 0.1.2:
- update f2fs to current upstream
- replace Cyanogenmod branding with mine
- strip kernel modules, you don't need to download 30mb+ anymore
If you want to use f2fs, I really suggest you to install this, the fixed bugs are really important. Else it is almost unneccessary
@CoolDevelopment
Very nice job! Finally we get a dedicated custom kernel for Amami
Oh and I saw the commits on CM gerrit. Nice job man :good:
I'll try flashing this on PAC. If what you say is true, that it doesn't modify the ramdisk, then it should boot. Otherwise I'll get stuck in a bootloop because PAC has custom jar files.
Finally some exciting development on Amami, testing now
EDIT: just a tip, you should ask a mod to move this thread to original development, because it really belongs there
EDIT2: it works perfectly
Yes it doesnt work on pa aslo :/
ygecesefa said:
Yes it doesnt work on pa aslo :/
Click to expand...
Click to collapse
Please give me details else i can't help
Sent from my Xperia Z1 Compact using XDA Premium 4 mobile app
it work on candykat rom
@cooldevekopment Is it possible to include TWRP instead of CWM in your kernel. I know there is a patch for f2fs that has TWRP buid-in, but anyway.
da900 said:
@cooldevekopment Is it possible to include TWRP instead of CWM in your kernel. I know there is a patch for f2fs that has TWRP buid-in, but anyway.
Click to expand...
Click to collapse
this kernel has no ramdisk, meaning it doesn't contain nether CWM nor TWRP,
whatever recovery you'll flash the kernel through, it won't be replaced with any other recovery
OmarEinea said:
this kernel has no ramdisk, meaning it doesn't contain nether CWM nor TWRP,
whatever recovery you'll flash the kernel through, it won't be replaced with any other recovery
Click to expand...
Click to collapse
Does this mean I can flash it even on a rooted stockrom?? 4.4.4 108 for example
djdana said:
Does this mean I can flash it even on a rooted stockrom?? 4.4.4 108 for example
Click to expand...
Click to collapse
Nope, because it is based on AOSP kernel source, which won't work on Sony based ROMs,
this kernel will only work on AOSP-based (CM-based) ROM..
To bad haha thanks for the quick reply
This is an initial build it may contain some bugs.
HTML:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, dead cats,
* thermonuclear war, or you getting fired because the alarm app failed.
* YOU are choosing to make these modifications, and no point
* in pointing the finger at me for messing up your device
*/
OH BOY HERE WE GO!
CHANGELOG
V1.0
Tweaked MSM Thermal And Enabled Temprature Control
Powersuspend Better Battery Saving in sleep
Gentle Fair Sleeper
Compiled with UBERTC 4.9 (Uber uses the latest of every component as well as increases the Battery-Life too).
Enabled cleancache and frontswap to boost performance.
Gpu Overclocked to 720mhz!.
Added Lionfish Governor
Added Kcal Control(optimized settings set by default "MORE BRIGHTER,MORE COLOR FULL,DEEPER BLACKS")
Added Sound Control(optimized settings set by default "MORE LOUDER WITHOUT ANY DISTORTION")
Added Wakelock Control(optimized by default)
Added ARCH POWER(should improve battery life)
Added USB Fastcharge(Faster Charge While Connected Pc Via USB)
Added Schedule Workqueues(should improve battery life)
Added Dynamic Fsync
Added Gentle Fair Sleepers(should improve battery life)
Added FRANDOM(random number generator 50X faster than stock)
ZRAM Enabled By Default.
State_helper/Notifier.
INSTALLATION INSTRUCTIONS
I Would highly recommend clearing data of your current kernel adiutor/any other apps that you use to control features or better yet since this is a "FLASH AND FORGET" kernel uninstall them you don't need it now.
Download the .zip file from the downloads section.
Reboot into recovery.
Select the zip file and flash.
this kernel is "FLASH AND FORGET" meaning everything is set and optimized by default if you mess up by changing default settings i won't provide any help
DOWNLOADS
Removed
NOW FOR SOME GROUND RULES :silly:
PLEASE USE GIVEN SECTIONS ABOVE TO SORT EVERYTHING YOU HAVE IN YOUR MIND FOR EXAMPLE IF YOU WANT TO REPORT A BUG USE BUG REPORT SECTION ANY BUG REPORTS GIVEN IN THE COMMENT SECTIONS WILL BE IGNORED SAME GOES FOR EVERYTHING.
IF YOU WANT TO REPORT A BUG PLEASE EXPLAIN IT IN DETAILS AND STEPS OF HOW THAT BUG OCCURED AND WITHOUT LOGCATS I CAN'T DO ANYTHING.
WANNA HELP US?
Be A Regular User And Give Feedbacks Every Week With Logs And Battery Stats.
Drop A Like.:fingers-crossed:
XDA:DevDB Information
Reaper-Darkness, Kernel for the Zenfone 2 Laser
Contributors
ShadowReaper1, audahadi, commits i used from other dev's repo
Source Code: https://github.com/ShadowReaper1/android_kernel_asus_Z010D.git
Kernel Special Features: A Better And Feature Full Replacement For Stock Kernel.
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2017-01-01
Created 2017-01-01
Last Updated 2017-01-01
Reserved
Kernel Settings?
i prefer to use stock settings but if you want more battery then change the governor to lionfish but it might lag so i will just ignore those whinny comments about lagging.
Warning -> if you flash this kernel on stock rom! wifi will stop working.
Having problems? or anything you wanna ask? Mention me on your comment.
How to use the features that are implemented in the kernel?
Download kernel adiutor from playstore and give it root permissions.
Explore!.
Saw a feature in some other kernel and you want the same feature too? then request for it in Feature Requests section I'll try my best to bring it for you.
Reserved
How To Build Your Own Kernel?
*Each Step Is Very Important Be Sure To Follow Each Steps And Do As I Said.
*You Are Gonna A 64bit Linux OS Any Will Do I Use Ubuntu 16.04 LTS.
*Let's Setup Your Build Environment.
*Open Terminal(ctrl+alt+T).
*Now Type "sudo apt-get update" Then Hit Enter And Let It Complete.
*Refer To This Awesome Guide By @akhilnarang To Automatically Install All The Proprietary Things.
*Where "<name-of-script>" Type "ubuntu1604linuxmint18.sh" If You Have Ubuntu 16.04 Then Hit Enter And Let It Complete.
*You'll Need Kernel Sources Again Open Terminal And Type "git clone https://github.com/ShadowReaper1/android_kernel_asus_Z010D.git" And Let It Complete It'll Take A While Depends On Your Internet Speed.
*Now To Compile The Kernel Download A arm64/aarch64 Toolchain You Can Use Any Gcc 4.9 Toolchain I Prefer Google or UBER Toolchain.
*Open Kernel Directory It Should Be Named Like "android_kernel_asus_Z010D" And Open build.sh And Edit The Parts Where "change" Is Written According To Your Toolchain Path And Cpu Cores After Editing Save It.
*It's Time To Compile The Kernel Open Terminal Inside Kernel Directory And Type "bash build.sh" or "./build.sh" Then Choose The Appropriate Options And Sit Back And Wait For It To Complete And You'll Find Your Kernel.zip inside "base_files" Folder.
*What To Do Next? Flash It .
*Add Features As You Like And Fix Bugs.
*Don't Come To Me Crying How To Add This And That I Won't Help In That Matter See Other Kernel's Of Other Devices With Same Specifications Use That As Reference And Cherry Picks Features From Them Resolve The Conflicts For More Information Refer To This Excellent Guide By @eagleeyetom.
*One More Thing Leave A Like And Press That Thanks Button .
Can it be used on cm13?
Trying now on my ZE550KL
followed thread for future updates
---------- Post added at 01:55 PM ---------- Previous post was at 01:39 PM ----------
UPDATE
flashed it in my ZE550kl usig twrp
device failed to boot.
After the asus logo, there was nothing but a plain black screen.
I hard to remove battery and reboot to twrp to restore the previous kernal.
btw i m on CM13.0 december snapshot.
Going to install on zenfone laser 550kl
tested:
after flashing device stuck at asus logo
iam using Resurection remix nougat 5.8.0 22nd december build
I also got the plain black screen after asus logo
Then i Flashed my roms boot.img solved
Trying on XOSP N and it's failed. Not even booting. Same case as 2 post above.
The commits in the source code says its for Zenfone Max
but here it says Zenfone 2 Laser
mate?
Figures.....
PaViTrA14 said:
The commits in the source code says its for Zenfone Max
but here it says Zenfone 2 Laser
mate?
Click to expand...
Click to collapse
both devices are same and we've tested that a compiled kernel from our source works well on ze500kl as well.
I already tried this on cm13 21st snapshoot, didnt work. It wont boot.
It's kernel for Z00ED/Z00RD
ShadowReaper1 said:
both devices are same and we've tested that a compiled kernel from our source works well on ze500kl as well.
Click to expand...
Click to collapse
So will it work in ze550kl we got lot bootloops here
thread deleted for the sake of your device.
ShadowReaper1 said:
thread deleted for the sake of your device.
Click to expand...
Click to collapse
ShadowReaper1 said:
both devices are same and we've tested that a compiled kernel from our source works well on ze500kl as well.
Click to expand...
Click to collapse
550kl and 500kl are different i guess?
I will upload a custom kernel for z00l, in time. Be patient.
The last time I compiled a kernel for linux (pc desktop) was like... 10 years ago, lol. Need some time to get used to the protocol now.
here's a guide, everyone should try their hand at compiling a custom kernel, but make a full phone backup, just in case.
https://forum.xda-developers.com/galaxy-s6/general/guide-how-to-build-samsung-kernel-july-t3429355
based on CM13-snapshot-20161221
- gpu adreno idler
- usb fast charging
- i/o scheduler: fiops, sio, tripndroid etc
- tcp congestion westwood, reno etc
work in progress: cpu governor, hotplug
btw, the following phone models uses the same kernel
zd550kl (snapdragon 8939)
ze550kl (snapdragon 8916 or 8939)
ze600kl (snapdragon 8939)
pokipokipxorn said:
I will upload a custom kernel for z00l, in time. Be patient.
The last time I compiled a kernel for linux (pc desktop) was like... 10 years ago, lol. Need some time to get used to the protocol now.
here's a guide, everyone should try their hand at compiling a custom kernel, but make a full phone backup, just in case.
https://forum.xda-developers.com/galaxy-s6/general/guide-how-to-build-samsung-kernel-july-t3429355
based on CM13-snapshot-20161221
- gpu adreno idler
- usb fast charging
- i/o scheduler: fiops, sio, tripndroid etc
- tcp congestion westwood, reno etc
work in progress: cpu governor, hotplug
btw, the following phone models uses the same kernel
zd550kl (snapdragon 8939)
ze550kl (snapdragon 8916 or 8939)
ze600kl (snapdragon 8939)

Click to expand...
Click to collapse
Wait for ur update
PaViTrA14 said:
550kl and 500kl are different i guess?
Click to expand...
Click to collapse
Indeed 550KL & 500KL are different.
Dev,please, don't delete kernel source. I can support this kernel for Z00ED and Z00RD, if u can't support this device