Develop Bugs

Wildfire jammed in FASTBOOT

Welcome.
I have the following problem with my HTC. When you turn on the phone immediately turns on fastboot and can not control buttons Vol + / - on the menu. Can I come in hboot, but there did not respond to my commands.
It is a chance to solve the problem?
*** UNLOCKED ***
BUZZ PVT SHIP S-ON
HBOOT-1002.0000
MICROP-0622
TOUCH PANEL-ATMELC03_16ac
RADIO-3.35.20.10
Click to expand...
Click to collapse

BukeR00 said:
Welcome.
I have the following problem with my HTC. When you turn on the phone immediately turns on fastboot and can not control buttons Vol + / - on the menu. Can I come in hboot, but there did not respond to my commands.
It is a chance to solve the problem?
Click to expand...
Click to collapse
Does it boot Into hboot or fastboot specifically? Also do you have an sdcard in the phone? And lastly when you plug in the usb cable to issue commands does the phone change to hbootUSB or fastbootUSB at all and does Windows detect and Install drivers?
Sent from my HTC Sensation XE with Beats Audio Z715e using Tapatalk 2

When I push the power button, phone starts in FASTBOOT. I can run it in hboot by pressing Vol-+ PWR.
In both modes, the buttons are not working. When I connect the USB cable changes as FASTBOOT USB / HBOOT USB or something like that. I have a card in your phone, I try without the card.

BukeR00 said:
When I push the power button, phone starts in FASTBOOT. I can run it in hboot by pressing Vol-+ PWR.
In both modes, the buttons are not working. When I connect the USB cable changes as FASTBOOT USB / HBOOT USB or something like that. I have a card in your phone, I try without the card.
Click to expand...
Click to collapse
OK please try without the card in also when you are in fastboot USB can you issue the command fastboot getvar all please and see if it works.
Sent from my Nexus 7 using Tapatalk 4

Code:
C:\adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.02.0000
INFOversion-baseband: 3.35.20.10
INFOversion-cpld: None
INFOversion-microp: 0622
INFOversion-main: 2.46.0.0
INFOserialno: ###########
INFOimei: ###########
INFOproduct: buzz
INFOplatform: HBOOT-7225
INFOmodelid: PC4910000
INFOcidnum: HTC__032
INFObattery-status: good
INFObattery-voltage: 3955mV
INFOpartition-layout: HTC
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 42e5cc47
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.053s
Without the card the same problems. Keys are not working. When I'm try to upload RUU crashes. 155 ERROR. I tried to many versions, as last RUU_Buzz_Froyo_HTC_WWE_2.22.405.1_Radio_13.55.55.24H_3.35.20.10_release_160191_signed
Thanks for your reply

BukeR00 said:
Code:
C:\adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.02.0000
INFOversion-baseband: 3.35.20.10
INFOversion-cpld: None
INFOversion-microp: 0622
INFOversion-main: 2.46.0.0
INFOserialno: ##########
INFOimei: ###############
INFOproduct: buzz
INFOplatform: HBOOT-7225
INFOmodelid: PC4910000
INFOcidnum: HTC__032
INFObattery-status: good
INFObattery-voltage: 3955mV
INFOpartition-layout: HTC
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 42e5cc47
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.053s
Without the card the same problems. Keys are not working. When I'm try to upload RUU crashes. 155 ERROR. I tried to many versions, as last RUU_Buzz_Froyo_HTC_WWE_2.22.405.1_Radio_13.55.55.24H_3.35.20.10_release_160191_signed
Thanks for your reply
Click to expand...
Click to collapse
I should have said, block out your imei and HTC serial number like I have. You never know whos watching...
Anyway, your bootloader is still unlocked so ruus wont flash. You can use the command fastboot oem lock to relock the bootloader. But, it's unlikely that it will work as you have an upgraded hboot. If I was you I would I would extract the Rom.zip from the ruu. Then extract that Rom.zip and you should end up with several images and some .nbh files. place the boot.img, system.img, data.img Into your fastboot folder. Then you going to want to format the phone with fastboot and then flash the phone with fastboot. http://androidforums.com/one-s-all-things-root/714676-list-fastboot-command.html here is a command list but I will tell you what I think it should be, and if you hit a snag refer to the link. So the commands should be in this order assuming you are CD'd to your fastboot folder
fastboot format boot
fastboot format system
fastboot format data
fastboot format cache
Then assuming it all goes well then issue these commands
fastboot flash system.img
fastboot flash data.img
fastboot flash boot.img
fastboot flash boot.img
fastboot reboot
Yes that flash the boot.img twice is not a typo all going well after this you should able to boot up. if you hit any big problems just hit the thread pal
Sent from my HTC Sensation XE with Beats Audio Z715e using Tapatalk 2

Code:
C:\adb>fastboot oem lock
... INFOLock successfully...
FAILED (status read failed (No such file or directory))
finished. total time: 0.015s
In FASTBOOT shows now - *** RELOCKED ***
Code:
fastboot format boot
fastboot format system
fastboot format data
fastboot format cache
It does not work. There is no these commands
Code:
C:\adb>fastboot erase boot
erasing 'boot'... FAILED (remote: not allowed)
finished. total time: 0.002s
C:\adb> fastboot erase data
erasing 'data'... FAILED (remote: not allowed)
finished. total time: 0.002s
C:\adb>fastboot erase system
erasing 'system'... FAILED (remote: not allowed)
finished. total time: 0.002s
Code:
C:\adb>fastboot flash system.img
unknown partition 'system.img'
error: cannot determine image filename for 'system.img'
C:\adb>\fastboot flash data.img
'\fastboot' is not recognized as an internal or external command,
operable program or batch file.
C:\adb>fastboot flash boot.img
unknown partition 'boot.img'
error: cannot determine image filename for 'boot.img'
C:\adb>fastboot flash system system.img
sending 'system' (212163 KB)... OKAY [ 44.854s]
writing 'system'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 98.833s
C:\adb>fastboot flash boot boot.img
sending 'boot' (2476 KB)... OKAY [ 1.050s]
writing 'boot'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.689s
C:\adb>fastboot reboot
rebooting...
finished. total time: 0.012s
In my rom.zip there is no data.img
After the command fastboot reboot the phone hangs on the white HTC boot screen.

BukeR00 said:
Code:
C:\adb>fastboot oem lock
... INFOLock successfully...
FAILED (status read failed (No such file or directory))
finished. total time: 0.015s
In FASTBOOT shows now - *** RELOCKED ***
Code:
fastboot format boot
fastboot format system
fastboot format data
fastboot format cache
It does not work. There is no these commands
Code:
C:\adb>fastboot erase boot
erasing 'boot'... FAILED (remote: not allowed)
finished. total time: 0.002s
C:\adb> fastboot erase data
erasing 'data'... FAILED (remote: not allowed)
finished. total time: 0.002s
C:\adb>fastboot erase system
erasing 'system'... FAILED (remote: not allowed)
finished. total time: 0.002s
Code:
C:\adb>fastboot flash system.img
unknown partition 'system.img'
error: cannot determine image filename for 'system.img'
C:\adb>\fastboot flash data.img
'\fastboot' is not recognized as an internal or external command,
operable program or batch file.
C:\adb>fastboot flash boot.img
unknown partition 'boot.img'
error: cannot determine image filename for 'boot.img'
C:\adb>fastboot flash system system.img
sending 'system' (212163 KB)... OKAY [ 44.854s]
writing 'system'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 98.833s
C:\adb>fastboot flash boot boot.img
sending 'boot' (2476 KB)... OKAY [ 1.050s]
writing 'boot'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.689s
C:\adb>fastboot reboot
rebooting...
finished. total time: 0.012s
In my rom.zip there is no data.img
After the command fastboot reboot the phone hangs on the white HTC boot screen.
Click to expand...
Click to collapse
Ah. This could be problematic. I should have been clearer, I didn't mean for you to lock your bootloader again, I was simply informing you it would need to be locked for an ruu to run. None of those commands will work while the bootloader is locked. If you were the one to unlock the device the you can unlock it again assuming you have the unlock_token.bin, using the same fastboot command again. If you didn't you will have to go to www.htcdev.com and make an account, then go to bootloader unlock, select wildfire buzz and ignore the bootloader update, as you already have it. (Skip should be near the bottom.) Then follow the instructions and get the bootloader unlocked again. Then issue the commands excluding the lock bootloader one and the flash data data.img as you don't have it. Its not a problem though, I was just covering all bases, incase it did have a data.img in there make sure you still do the data format though!
Sorry for the confusion
Sent from my HTC Sensation XE with Beats Audio Z715e using Tapatalk 2

What version of RUU I must use? I tested 3 versions and none of them has data.img
I have uploaded the files system.img, recovery.img, userdata.img and the phone still does not work. How can I delete the data. Fastboot format command does not work, there is no such command.
And after the command fastboot erase still:
Code:
C:\adb>fastboot erase boot
erasing 'boot'... FAILED (remote: not allowed)
finished. total time: 0.002s
C:\adb> fastboot erase data
erasing 'data'... FAILED (remote: not allowed)
finished. total time: 0.002s
C:\adb>fastboot erase system
erasing 'system'... FAILED (remote: not allowed)
finished. total time: 0.002s

BukeR00 said:
What version of RUU I must use? I tested 3 versions and none of them has data.img
I have uploaded the files system.img, recovery.img, userdata.img and the phone still does not work. How can I delete the data. Fastboot format command does not work, there is no such command.
And after the command fastboot erase still:
Code:
C:\adb>fastboot erase boot
erasing 'boot'... FAILED (remote: not allowed)
finished. total time: 0.002s
C:\adb> fastboot erase data
erasing 'data'... FAILED (remote: not allowed)
finished. total time: 0.002s
C:\adb>fastboot erase system
erasing 'system'... FAILED (remote: not allowed)
finished. total time: 0.002s
Click to expand...
Click to collapse
did you get the bootloader unlocked again? fastboot commands will only work on unlocked bootloaders.
Dont worry about the data.img, you do not need it. i simply added it incase the ruu had it and you got confused. again, it is not required.

Yes, I have unlocked bootloader, but comands still don't work.
//edit:
C:\sdk\sdk\platform-tools>fastboot format boot
formatting 'boot' partition...
FAILED (remote: unknown command)
FAILED (remote: unknown command)
finished. total time: 0.006s
C:\sdk\sdk\platform-tools>fastboot format system\
formatting 'system\' partition...
FAILED (remote: unknown command)
FAILED (remote: unknown command)
finished. total time: 0.006s
C:\sdk\sdk\platform-tools>fastboot format userdata
formatting 'userdata' partition...
FAILED (remote: unknown command)
FAILED (remote: unknown command)
finished. total time: 0.006s
Click to expand...
Click to collapse

BukeR00 said:
Yes, I have unlocked bootloader, but comands still don't work.
//edit:
Click to expand...
Click to collapse
hmmm. well if we cannot format the partitions then we are not going to have much luck :/
ok lets try a different tactic. download this and rename it to just recovery.img . then place it into your adb folder and then issue the following command via fastboot.
Code:
fastboot boot recovery.img
hopefully this will allow you to boot into clockworkmod recovery. when you enter clockworkmod recovery use the volume buttons to move and the trackball to select, power is back. format everything. then try to mount your sdcard using advanced/mount storage or sdcard, something to that effect. then place this file onto it. all going well you should be able to then flash this rom. dismount the usb storage, then go back to the main menu (power button) then go to flash/install, select choose zip and then the zip file we placed there. hopefully the recovery will install without issue. then, open the copy of the rom you downloaded on your pc and extract the boot.img. reboot the phone into fastboot and then use the command fastboot flash boot boot.img
all going well this rom will boot and you will have a working phone again.

Unfortunately, it does not change anything. I can not enter into Clockworkmod recovery. The keys are not working

BukeR00 said:
Unfortunately, it does not change anything. I can not enter into Clockworkmod recovery. The keys are not working
Click to expand...
Click to collapse
it should boot into cwm automatically, no button intervention required.

Unfortunately does not turn ClockworkMod. Phone lay two days without batteries, has launched today as normal. Everything worked. I wanted to do S-OFF by unrevoked, entered into hboot, the phone resets and hung on the HTC screen. After removing the battery turns on hboot again. In Unrevoked I saw that wrote "ClockworMode Recovery"

BukeR00 said:
Unfortunately does not turn ClockworkMod. Phone lay two days without batteries, has launched today as normal. Everything worked. I wanted to do S-OFF by unrevoked, entered into hboot, the phone resets and hung on the HTC screen. After removing the battery turns on hboot again. In Unrevoked I saw that wrote "ClockworMode Recovery"
Click to expand...
Click to collapse
Unrevoked doesnt s-off it only roots and flashes a recovery.
Sent from my HTC Sensation XE with Beats Audio Z715e using Tapatalk 2

[Q] Unable to boot into Recovery- Can't flash SU

Received phone today - 3rd HTC - Sensation>One S>M8
Just Unlocked via HTC Dev site
Flashed latest TWRP - openrecovery-twrp-2.7.1.0-m8.img - and also tried two previous versions. The two latest versions make the phone load right back into hboot screen. First version hangs for a moment, making me think it will boot into Recovery, then phone just reboots.
Will not boot into recovery
Cannot boot from Fastboot and adb says error: device not found.
Latest drivers installed
I even reinstalled HTC Sync
T-mo US
*** TAMPERED ***
*** UNLOCKED ***
M8_UL PVT SHIP S-ON
HBOOT-3.16.0.0000
RADIO-1.16.21331931.LA24G
Open DSP-v38.2.2-00542-M8974.0311
OS-1.57.531.7
eMMC-boot 2048MB
MAY 8 2004,21:19:27.0
Any recommendations?

Did you turn off the fast boot mode?
Sent from HTC One m8, or maybe not anymore

Yes, fast boot has been disabled from the security settings and USB debugging is on.
Sent from my HTC One_M8 using xda app-developers app

Maybe you flashed recovery into boot partition by omission?
Did you use
fastboot flash recovery openrecovery-twrp-2.7.1.0-m8.img

Yes, as far as I can tell, I flashed the recovery correctly.
Sent from my One S using XDA Free mobile app

I got excactly the same problem, but its the international GSM version...
I would be very happy if someone knew a solution

Very strange. Can you guys try flashing Philz recovery and see if it boots now?

stathis95194 said:
Very strange. Can you guys try flashing Philz recovery and see if it boots now?
Click to expand...
Click to collapse
Just tried that, doesnt work either...
I can boot the phone but not get into the recovery...

tschoesi said:
Just tried that, doesnt work either...
I can boot the phone but not get into the recovery...
Click to expand...
Click to collapse
Can you take a screenshot of the fastboot commands/output?
Did you erase cache/dalvik?

stathis95194 said:
Can you take a screenshot of the fastboot commands/output?
Did you erase cache/dalvik?
Click to expand...
Click to collapse
Code:
C:\adb>fastboot.exe flash recovery philz_touch_6.48.4-m8.img
< waiting for device >
target reported max download size of 1830227968 bytes
sending 'recovery' (14436 KB)...
OKAY [ 1.454s]
writing 'recovery'...
OKAY [ 0.762s]
finished. total time: 2.217s
I cant post pictures yet, because im a new member
And yeah, I tried it with and without erasing the cache...

tschoesi said:
Code:
C:\adb>fastboot.exe flash recovery philz_touch_6.48.4-m8.img
< waiting for device >
target reported max download size of 1830227968 bytes
sending 'recovery' (14436 KB)...
OKAY [ 1.454s]
writing 'recovery'...
OKAY [ 0.762s]
finished. total time: 2.217s
I cant post pictures yet, because im a new member
And yeah, I tried it with and without erasing the cache...
Click to expand...
Click to collapse
What's the output of these commands?
fastboot getvar modelid
fastboot getvar cid

stathis95194 said:
What's the output of these commands?
fastboot getvar modelid
fastboot getvar cid
Click to expand...
Click to collapse
Code:
C:\adb>fastboot.exe getvar cid
cid: HTC__102
finished. total time: 0.001s
C:\adb>fastboot.exe getvar modelid
modelid: 0P6B64000
finished. total time: 0.000s
I have the dual sim version by the way, maybe that makes a difference

tschoesi said:
Code:
C:\adb>fastboot.exe getvar cid
cid: HTC__102
finished. total time: 0.001s
C:\adb>fastboot.exe getvar modelid
modelid: 0P6B64000
finished. total time: 0.000s
I have the dual sim version by the way, maybe that makes a difference
Click to expand...
Click to collapse
oh!!!! that makes all the difference in the world I think you need a different recovery to support dual sim.
Try this one:
https://yadi.sk/d/cMN-N_2hWotAH

stathis95194 said:
oh!!!! that makes all the difference in the world I think you need a different recovery to support dual sim.
Try this one:
Click to expand...
Click to collapse
I feel so dumb now for not thinking of this! Im in the recovery now Thanks alot!

tschoesi said:
I feel so dumb now for not thinking of this! Im in the recovery now Thanks alot!
Click to expand...
Click to collapse
That's great that you have it working now.
All credit goes to @kentilo here:
http://forum.xda-developers.com/htc-one-m8/help/htc-one-m8-dual-sim-european-version-t2816991

I'll be back in front of a computer in about nine hours. I'll try then. Not on the dual SIM but I'll try philz recovery. Thanks.
Sent from my HTC One_M8 using xda app-developers app

stathis95194 said:
Very strange. Can you guys try flashing Philz recovery and see if it boots now?
Click to expand...
Click to collapse
That did it! PHILZ TO THE RESCUE! Pretty cool UI.
Thanks again! Time to s-off!!!

tschoesi said:
Code:
C:\adb>fastboot.exe getvar cid
cid: HTC__102
finished. total time: 0.001s
C:\adb>fastboot.exe getvar modelid
modelid: 0P6B64000
finished. total time: 0.000s
I have the dual sim version by the way, maybe that makes a difference
Click to expand...
Click to collapse
I have LG F180s, I used tinybeen+LGnpst tutorial, I can fastboot which has information like:
Product_name: Mako
Variant: mako 32gb
bootloader version: makoz10f
secure boot: enabled
lock state: unlocked
I tried your fastboot variables i.e.
fastboot.exe getvar cid (returns empty value for cid)
fastboot.exe getvar modelid (returns empty value for modelid)
Its been 3 days, that I am trying to get into recovery. I have tried both TWRP and CWM recoveries (various versions for LS970, Mako, PhilZ). I have also tried flashing stock ROM via LG Flash Tool 2014, completes successfully but phone enters BootLoop.
Therefore teenybins+LGnpst took me out of bootloop but now it cannot enter recovery. Although Teenybins say that they include TWRP

iltaf_k said:
I have LG F180s, I used tinybeen+LGnpst tutorial, I can fastboot which has information like:
Product_name: Mako
Variant: mako 32gb
bootloader version: makoz10f
secure boot: enabled
lock state: unlocked
I tried your fastboot variables i.e.
fastboot.exe getvar cid (returns empty value for cid)
fastboot.exe getvar modelid (returns empty value for modelid)
Its been 3 days, that I am trying to get into recovery. I have tried both TWRP and CWM recoveries (various versions for LS970, Mako, PhilZ). I have also tried flashing stock ROM via LG Flash Tool 2014, completes successfully but phone enters BootLoop.
Therefore teenybins+LGnpst took me out of bootloop but now it cannot enter recovery. Although Teenybins say that they include TWRP
Click to expand...
Click to collapse
Totally wrong part of the forum !

fastboot getvar modelid
modelid: 0PKV10000
finished. total time: -0.000s
fastboot getvar cid
cid: HTC__Y13
finished. total time: -0.000s
What's the correct recovery version for this? i tried a lot of versions. its not opening :/
HTC One M8s
fastboot unlocked.
not rooted(hoping to root through recovery)

Trying to flash UK O2 HTC One M9

Hello, My phone recently started playing up and it's out of warranty according to O2 because of a scratch on the screen.
The problem was settings would not open, with "Unfortunately settings has stopped". Next the same thing happened to the play store so I can't change any settings or install any apps. Great.
I tried a few suggestions online:
- Wiped cache in bootloader.
- Factory reset
Neither solve the problem, the same error still happens on a fresh install.
So that gets me thinking I need to reinstall firmware? Please tell me to STOP now if this is the wrong thing to do!
I've not done this before so forgive my noobiness.
I've located the correct RUU I believe matching these details:
Code:
C:\Users\Ed\Downloads\ADB_20151221_Fastboot_20150822_HtcFastboot_20150529>fastboot getvar all (bootloader) kernel: lk
(bootloader) product: htc_himauhl
(bootloader) version: 1.0
(bootloader) imei: ############
(bootloader) version-main: 3.35.206.13
(bootloader) boot-mode: download
(bootloader) version-baseband: 01.01_U11440792_93.00.51117G_F
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 0PJA10000
(bootloader) cid: O2___001
all:
finished. total time: 0.017s
androidfilehost fid=24421527759889318
This is what I've got (sorry can't post links!).
I don't have an SD card to fit the phone, can I flash this from my PC or do I need an EXE version?
Thanks
Ed
EDIT: On download of that RUU zip file, when I try to extract the files it says archive corrupt (I've tried downloading twice). Is that normal or is the thing broken? Don't wanna brick the phone.

You don't have to extract the zip file. It's normal for the zip file to not be openable/extractable, as it's encrypted. If you *really* need access to the inside of the RUU (example, get the stock boot image), use the Universal Decryption Tool.
I'm not 100% sure, but I think you should reflash the firmware. Although it's optional, I think your bootloader should be LOCKED or RELOCKED before flashing your RUU.
Instructions are here.
And remember, just in case, triple-check your RUUs.

lazyguyMC said:
You don't have to extract the zip file. It's normal for the zip file to not be openable/extractable, as it's encrypted. If you *really* need access to the inside of the RUU (example, get the stock boot image), use the Universal Decryption Tool.
I'm not 100% sure, but I think you should reflash the firmware. Although it's optional, I think your bootloader should be LOCKED or RELOCKED before flashing your RUU.
Instructions are here.
And remember, just in case, triple-check your RUUs.
Click to expand...
Click to collapse
As I said I don't have an SD card which is all the instructions that post gives, however I found a guide for htc_fastboot. I tried with locked and unlocked. Here is the output:
C:\Users\Ed\Downloads\ADB_20151221_Fastboot_20150822_HtcFastboot_20150529>htc_fastboot oem rebootRUU ...
OKAY [ 0.056s]
finished. total time: 0.056s
htc_fastboot finished. total time: 0.284s
C:\Users\Ed\Downloads\ADB_20151221_Fastboot_20150822_HtcFastboot_20150529>htc_fastboot flash zip 0PJAIMG.zip
htc_fastboot v3.0.9.2 (2015-05-29)
target rom version: 3.35.206.13
found large-zip header, file count: 8
processing file 1/8...
sending 'zip' (159355 KB)...
OKAY [ 9.158s]
writing 'zip'...
(bootloader) HOSD CL#670363
(bootloader) GPT is up-to-dated. [17408]
(bootloader) Perform pre-update
FAILED (remote: 90 hboot pre-update! please flush image again immediately )
finished. total time: 13.808s
preupdate done, rebooting...
resending command...
< waiting for device >
sending 'zip' (159355 KB)...
FAILED (status read failed (Unknown error))
finished. total time: 9.218s
htc_fastboot finished. total time: 41.721s
C:\Users\Ed\Downloads\ADB_20151221_Fastboot_20150822_HtcFastboot_20150529>htc_fastboot oem rebootRUU ...
OKAY [ 0.001s]
finished. total time: 0.001s
htc_fastboot finished. total time: 0.218s
C:\Users\Ed\Downloads\ADB_20151221_Fastboot_20150822_HtcFastboot_20150529>htc_fastboot flash zip 0PJAIMG.zip
htc_fastboot v3.0.9.2 (2015-05-29)
target rom version: 3.35.206.13
found large-zip header, file count: 8
processing file 1/8...
< waiting for device >
sending 'zip' (159355 KB)...
FAILED (status read failed (Unknown error))
finished. total time: 9.194s
htc_fastboot finished. total time:
25.078s
C:\Users\Ed\Downloads\ADB_20151221_Fastboot_20150822_HtcFastboot_20150529>htc_fastboot oem unlock ...
OKAY [ 0.000s]
finished. total time: 0.000s
htc_fastboot finished. total time: 0.206s
C:\Users\Ed\Downloads\ADB_20151221_Fastboot_20150822_HtcFastboot_20150529>htc_fastboot oem rebootRUU ...
OKAY [ 0.001s]
finished. total time: 0.001s
htc_fastboot finished. total time: 0.194s
C:\Users\Ed\Downloads\ADB_20151221_Fastboot_20150822_HtcFastboot_20150529>htc_fastboot flash zip 0PJAIMG.zip
htc_fastboot v3.0.9.2 (2015-05-29)
target rom version: 3.35.206.13
found large-zip header, file count: 8
processing file 1/8...
< waiting for device >
sending 'zip' (159355 KB)...
FAILED (status read failed (Unknown error))
finished. total time: 9.309s
htc_fastboot finished. total time: 23.830s
Click to expand...
Click to collapse
Neither seems to be working. At the moment the phone is still in RUU mode with the a progress bar about 20% on blue. Don't want to switch it off midway?!
EDIT: To be exact it fails at 18% in the second phase (after pre-update).

I can't help much, but you should try using a regular fastboot.exe and change "htc_fastboot" to "fastboot" in your commands(don't. it will fail.) Also try checking here.

boblettoj99 said:
As I said I don't have an SD card which is all the instructions that post gives, however I found a guide for htc_fastboot. I tried with locked and unlocked. Here is the output:
Neither seems to be working. At the moment the phone is still in RUU mode with the a progress bar about 20% on blue. Don't want to switch it off midway?!
EDIT: To be exact it fails at 18% in the second phase (after pre-update).
Click to expand...
Click to collapse
Wizard_RUU​
A small utility from HTC - a shell for flashing RUU.zip through PC (Windows)
Unpacked and taken from official RUU.exe from HTC
How to use:
Download archive Wizard_RUU.rar, unpack.
Download the stock RUU firmware in ZIP (suitable for CID and MID of your phone)
Copy the stock RUU ZIP in the folder with Wizard_RUU
Rename 0PJAIMG_HIMA _ *****. zip to rom.zip
Run the ARUWizard.exe file and follow the on-screen instructions.
If after installing ARUWizard.exe and after confirming the agreement condition, the installation crashes, then download and install Microsoft Visual C ++. After that, run ARUWizard.exe again
Download:
Wizard_RUU.rar (mirror on AFH)
It is used as an alternative to installing the ruu.zip through an external sd card.
PS. All data on the phone will be deleted. If possible, make a backup before installing RUU.

Restoring to stock *LOCKED*

ok i have tried searching but im a bit dumbfounded i restored my phone back to stock via a ruu , then i set s-on back via command fastboot oem writesecureflag 3 now i need to set it back to locked , would really appreciated being pointed in right direction if possible please ?
** edit tried C:\Android\com>htc_fastboot oem lock
...
FAILED (remote: unknown command)
finished. total time: 0.021s
htc_fastboot finished. total time: 0.179s
C:\Android\com>
C:\Android\com>fastboot oem lock
...
(bootloader) [KillSwitch] : /dev/block/bootdevice/by-name/frp
(bootloader) [KillSwitch] Last Byte is 0X00, disable unlock
(bootloader) [KillSwitch] oem unlock Turn Off!
OKAY [ 0.015s]
finished. total time: 0.016s
C:\Android\com>

tonnytech said:
ok i have tried searching but im a bit dumbfounded i restored my phone back to stock via a ruu , then i set s-on back via command fastboot oem writesecureflag 3 now i need to set it back to locked , would really appreciated being pointed in right direction if possible please ?
** edit tried C:\Android\com>htc_fastboot oem lock
...
FAILED (remote: unknown command)
finished. total time: 0.021s
htc_fastboot finished. total time: 0.179s
C:\Android\com>
C:\Android\com>fastboot oem lock
...
(bootloader) [KillSwitch] : /dev/block/bootdevice/by-name/frp
(bootloader) [KillSwitch] Last Byte is 0X00, disable unlock
(bootloader) [KillSwitch] oem unlock Turn Off!
OKAY [ 0.015s]
finished. total time: 0.016s
C:\Android\com>
Click to expand...
Click to collapse
Use SunShine again and choose S-OFF/Locked. Afterwards go S-ON again, just like you did before.
You need to have flashed an RUU intended for your original model, not just stock.

errikosd said:
Use SunShine again and choose S-OFF/Locked. Afterwards go S-ON again, just like you did before.
You need to have flashed an RUU intended for your original model, not just stock.
Click to expand...
Click to collapse
thanks for the reply i sorted it as you suggested already appreciate reply thou

Retail stock 9 with gpay?

I had been using 8 for a while successfully with Google Pay functioning and recently updated to the latest 9 because... updates are great right (https://mirrors.lolinet.com/firmware/moto/nash/official/RETAIL/)
Even after relocking the bootloader and OEM unlock, Gpay says it cannot be used on this phone as it's been modified. I tried downgrading back to 8 but WIFI and Mobile Data didn't work, lucky bluetooth tehtered to OEM unlock (I relocked the bootloader for Gpay before noticing access did not work) so I'm back on 9 with the retail FlashAll but ideally am after Google Pay working as it's my access to the wifes credit card when mine hits the limit (renos.... joy)
So, team, geniuses... is it possible to run Stock Pie Retail (1789-05 retcn) with a locked bootloader and all functionality working? If so... how?! Many thanks :cyclops:

Does your phone pass safetynet check?

SafetyNetResponse
ctsProfileMatch=false, basicIntegrity=true, advice=LOCK_BOOTLOADER,RESTORE_TO_FACTORY_ROM}
I'll relock bootloader tonight ... Reloading apps and messages is tiresome!
On the last instance with a locked bootloader Google Pay would not allow my card to be added

Just my luck...
fastboot.exe oem lock
(bootloader) s: not found
(bootloader) slot-suffi: not found
...
FAILED (remote: unknown command)
finished. total time: -0.000s
fastboot flashing lock
(bootloader) s: not found
(bootloader) slot-suffi: not found
...
FAILED (remote: unknown command)
finished. total time: -0.000s
fastboot oem relock
...
FAILED (remote: unknown command)
finished. total time: 0.000s
C:\adb\Z2FORCE9.0>fastboot oem lock
(bootloader) slo: not found
(bootloader) slot-suffi: not found
...
FAILED (remote: unknown command)
finished. total time: 0.016s

The only type of firmware you can relock have 4 letter characters that end in an S. For instance, the latest RETAIL Pie update has PPX29. You would only be able to relock on Pie using PPXS29.
Your best bet is flashing the latest OPXS firmware and getting an OTA update to 9. Also, I recommend using this utility to generate the template of fastboot commands: https://github.com/dlenski/motoflash2sh.
And as far as relocking goes, you can use guides for older moto z phones, they all work about the same, like this one: https://forum.xda-developers.com/showpost.php?p=74222803&postcount=26

ben0551 said:
Just my luck...
fastboot.exe oem lock
(bootloader) s: not found
(bootloader) slot-suffi: not found
...
FAILED (remote: unknown command)
finished. total time: -0.000s
fastboot flashing lock
(bootloader) s: not found
(bootloader) slot-suffi: not found
...
FAILED (remote: unknown command)
finished. total time: -0.000s
fastboot oem relock
...
FAILED (remote: unknown command)
finished. total time: 0.000s
C:\adb\Z2FORCE9.0>fastboot oem lock
(bootloader) slo: not found
(bootloader) slot-suffi: not found
...
FAILED (remote: unknown command)
finished. total time: 0.016s
Click to expand...
Click to collapse
If you noticed, your commands are cut off and not properly formatted. This is usually because of outdated adb/fastboot files, bad or no oem cable, or incompatible usb port. Update your adb/fastboot files and make sure you're using the oem cable and 2.0 usb ports for reliability.
As for relocking, I don't recommend it. If you look around the forum you'll see a few that are basically up a creek because they relocked the bootloader and something went wrong. Now they can't flash anything because their bootloader is locked. You should reflash retail 9 and take an ota if you can. Try and clear up any mismatches or discrepancies. Try Gpay afterwards. Many have no issues using Gpay, even with unlocked rooted devices.

With retail 9 and unlocked bootloader I cant access settings > updates or gpay

"As your system device integrity is compromised you are no longer eligible for updates"

ben0551 said:
"As your system device integrity is compromised you are no longer eligible for updates"
Click to expand...
Click to collapse
Download your firmware from lolinet and manual flash it.

41rw4lk said:
Download your firmware from lolinet and manual flash it.
Click to expand...
Click to collapse
If I flash 9 from lolinet, I can't lock bootloader / use gpay
If I flash 8 from lolinet, baseband is gone
Suggesting flash 8, lock and OTA via bluetooth tether?

ben0551 said:
If I flash 9 from lolinet, I can't lock bootloader / use gpay
If I flash 8 from lolinet, baseband is gone
Suggesting flash 8, lock and OTA via bluetooth tether?
Click to expand...
Click to collapse
Why don't u try flashing stock 8 but with modem from 9?