Develop Bugs

no sound, need help fast

Hi. Problem: I had the headset inside, put it out (was not an original, with adapter 3.5mm to 2.5mm). No sound. So I read that the contact in the headphone jack is stuck.Where is the contact which is clamped ? I already tried it with a nail one hour, wihtout succses. or how can I test whether the defect in outdoor speakers? "It is urgent, thank you

B.R. Michal

it could be your speaker as well. that is what happened to mine
but it could be your jack. from memory, put in the adaptor and pull it out fast a few times to see if it is the adaptor.

i opened ma mobile and see the jack .. but which contacts should contact each other so i hera speaker?

without jack (hedphones) must be short (conected) pin 2 - 4
and pin 3 - 5 (see my send picture)
B.R.
Michal
P.S. sorry my english

but this are the pins which are solder, i need the inside the jack

it works now, thank you very much

hey, what did you do to make it work?
i dont really want to open the phone if not nessesary.
greets

i opened it

-_-_- Solved -_-_-
v1d3n said:
hey, what did you do to make it work?
i dont really want to open the phone if not nessesary.
greets
Click to expand...
Click to collapse
Sorry man, you have to open your device like what i did me to. it tooked for me 2 minutes to fix that problem
But be carefull.
if don't know how to open your device, i advice you to not to do it.
ask an experienced hands to heal your Prophet
after opening your device, look at the jack, you will see it covered, its actually covered by a lil plastic cover that you can pop off with a small screw driver. the jack will be like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
when you unplug the earphones, the metal parts shown in the red circle on the photo must be connected.
when you put in the earphones the metal parts must be disconnected.
that's all
Good luck to all of you.
Enlarge the picture by pressing on it in the attachment.
For detailed information go here
http://forum.xda-developers.com/showthread.php?t=297871&highlight=jack&page=5
ThanX to camilo26sk for the picture.

thanks
it's work for me after one year i can fix my problem thanks guys

[Q] What should I do with this screen?

Hello,
I've had my desire for almost a year now, and it broke yesterday... I was playing with my 6-year old nephews, and my desire fell out of my pocket. I didn't know that it was broken until I wanted to check my whatsapp a few hours later, and when I did, the screen was like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
... (lol the image is way too big)The touchscreen is working fine, I can turn it on and unlock it, I can even send an whatsapp, because I knew where the icon was. So what should I do with it? Repair it if it's possible? How much would that cost? I now have an iPhone 3gs as stand-in, should I keep that for as long as my contract lasts (1 year)? Or should I buy a new one? If so, which one would you advise me? A cheap one please, as I want to save for the PS4 later this year.
I'm running Sandvolds ICS for those that want to know...
Thanks!

There's a possibility that the screen cable is slightly disconnected. Try to disassemble the phone, and check the cable.

Thanks for the reply, I'll give it a try
Edit: Yeah I tried to take it apart, seems I've got no T5 screwdriver at home... Basically, if I would take it apart I would have not any idea what te screen cable is... Is it the LCD connecter? I do know quite a bit about software and that sort of stuff, but I'm a n00b at replacing hardware :S

Timo221298 said:
Thanks for the reply, I'll give it a try
Edit: Yeah I tried to take it apart, seems I've got no T5 screwdriver at home... Basically, if I would take it apart I would have not any idea what te screen cable is... Is it the LCD connecter? I do know quite a bit about software and that sort of stuff, but I'm a n00b at replacing hardware :S
Click to expand...
Click to collapse
I had the exact same screen on my Desire :silly:
That screen is broken and you need to replace it. I would recomend a professional to do it because I tried to do it myself and I destroyed my phone. And the other thing if you decide to go on with replacement - Desire had two different screen types and every type had one or two subtypes which are NOT compatible with each other so you need to know exactly what type of screen you have

Power button fell out. Help!

I was disassembling my phone to change my audio jack and while taking out the frame, the plastic power button completely popped out (my fault, I know what I did wrong). So I tried pressing the actual flex cable to turn on the phone and that didn't even work, so I'm assuming I need to buy a new flex cable. Also how do I put the physical power button back in the phone? I can't find a way to make it stick.
Someone help, I really am lost

Anyone?

Iconic24 said:
I was disassembling my phone to change my audio jack and while taking out the frame, the plastic power button completely popped out (my fault, I know what I did wrong). So I tried pressing the actual flex cable to turn on the phone and that didn't even work, so I'm assuming I need to buy a new flex cable. Also how do I put the physical power button back in the phone? I can't find a way to make it stick.
Someone help, I really am lost
Click to expand...
Click to collapse
This may help:
Samsung Galaxy Note 2 (T889) Power Flex Installation Video.

That helps some, thanks!
But I also cant figure out how to put the power button itself back on onto the middle housing, or do I have to buy a new housing now?

do you have any pictures of it? its hard to imagine whats going with your phone

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

i think you might need to remove the chrome frame and put the power button back the way it was or you can take a look at volume button on the other side seeing how it attached to the frame and also try to use super glue. btw does the power button work?

I never thought about comparing it to the volume side, good idea. And the power button doesn't work so I definitely need a new flex cable

if the power button doesnt work for now, you can use touchwake function in trickster if you have it in your rom

Cuted cable from display assembly

Hey all,
my galaxy note wont charge. So i opened the device to fix it. The good thing is, that the device now charge. The bad thing is that i cuted the cable for the display assembly.
I mirror the display to my pc and i see that the device is booting correctly. But the display is not working.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the thing which is broken by me. The right cable is cuted.
Is there any option two replace just the cable instead of buying a whole new display assembly?
Thanks for your help and sorry for my bad english.
Greetings
Dominique

WoHinDu said:
Hey all,
my galaxy note wont charge. So i opened the device to fix it. The good thing is, that the device now charge. The bad thing is that i cuted the cable for the display assembly.
I mirror the display to my pc and i see that the device is booting correctly. But the display is not working.
This is the thing which is broken by me. The right cable is cuted.
Is there any option two replace just the cable instead of buying a whole new display assembly?
Thanks for your help and sorry for my bad english.
Greetings
Dominique
Click to expand...
Click to collapse
I've never used this company so dont know if they're any good, quite a few parts tho...... its just if you can fit them
http://www.electron-parts.com/lcd-flex-cable-ribbon-for-samsung-galaxy-note-n7000_p26342.html

numskull said:
I've never used this company so dont know if they're any good, quite a few parts tho...... its just if you can fit them
http://www.electron-parts.com/lcd-flex-cable-ribbon-for-samsung-galaxy-note-n7000_p26342.html
Click to expand...
Click to collapse
Thank you! I try it!

Hey,
the cable arrived today. I tried to get it build in but no change. It's too tricky. I think it's not possible to get the screen off without a brick. If someone can put the screen away without bricking it, it's very hard to connect the new cable to the screen.
The phone is dead. Maybe i found a cheap damaged phone with a working screen on ebay... We will see.

I will try it.

Hope you can fix the phone asap

Need Dead/Damaged Phone for Part

Hi Guys,
After I cleaned my phone Volume UP button is no longer working. I need to replace Volume Flex Board/ Daughter Board, Local service center does not have part. If someone has Dead /Damage device with working volume buttons willing to sell / giveaway please let me know.

smokin901 said:
Hi Guys,
After I cleaned my phone Volume UP button is no longer working. I need to replace Volume Flex Board/ Daughter Board, Local service center does not have part. If someone has Dead /Damage device with working volume buttons willing to sell / giveaway please let me know.
Click to expand...
Click to collapse
Pretty sure this is the part you are looking for.
If so, this is fairly inexpensive and ships from the U.S.
Here is the link
(unless of course, someone has one they will send you for free)

santod040 said:
Pretty sure this is the part you are looking for.
If so, this is fairly inexpensive and ships from the U.S.
Here is the link
(unless of course, someone has one they will send you for free)
Click to expand...
Click to collapse
Nah that is power button flex. I need this but CDMA phones have this little different there an antenna flex where volume board is connecting
https://dl.dropboxusercontent.com/u/68022981/GetApplicationAttachment.html.pdf check page 12-13
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Cannot even locate that part on google 50H10210-02M-XF forget on ebay or any other site only other looks same as is verizon m7 daughter board

I would suggest trying to find a verizon m7 on ebay with a cracked screen and extracting the part. The sister board with the cdma antenna is just not for sale anywhere. I needed that part as well and found a very damaged htc one on ebay for 85.00 bucks the internal parts were all good. I wound up making my m7 red.