Develop Bugs

NEED HELP !!! OPPO FIND 7 stuck on boot with logo only

Tried fixing my oppo find 7
Did all those Fastboot wipe .
Fastboot flash recovery and flash LOGO and stuffs
but im still stuck on logo ... WHUT

kevzwenhao said:
Tried fixing my oppo find 7
Did all those Fastboot wipe .
Fastboot flash recovery and flash LOGO and stuffs
but im still stuck on logo ... WHUT
Click to expand...
Click to collapse
Did you unlock bootloader?
1. Connect the device to the computer through USB.
2. From a terminal on a computer, type the following to boot the device into fastboot mode (or restart pressing power+vol up):
Code:
adb reboot bootloader
3. Once the device is in fastboot mode, verify your PC sees the device by typing:
Code:
fastboot devices
4. From the same terminal, type the following command to unlock the bootloader:
Code:
fastboot oem unlock
If the device doesn't automatically reboot, reboot it from the menu. It should now be unlocked.
5. Then you can flash the recovery what you want. In fastboot mode, type in terminal:
Code:
fastboot devices
6. And flash the recovery. Type:
Code:
fastboot flash recovery your_recovery_image.img
Good luck

roi_xordo said:
Did you unlock bootloader?
1. Connect the device to the computer through USB.
2. From a terminal on a computer, type the following to boot the device into fastboot mode (or restart pressing power+vol up):
Code:
adb reboot bootloader
3. Once the device is in fastboot mode, verify your PC sees the device by typing:
Code:
fastboot devices
4. From the same terminal, type the following command to unlock the bootloader:
Code:
fastboot oem unlock
If the device doesn't automatically reboot, reboot it from the menu. It should now be unlocked.
5. Then you can flash the recovery what you want. In fastboot mode, type in terminal:
Code:
fastboot devices
6. And flash the recovery. Type:
Code:
fastboot flash recovery your_recovery_image.img
Good luck
Click to expand...
Click to collapse
Hi, is it wrong to wipe the system partition before flashing a custom rom? Coming from stock ColorOS, I've wiped all dalvik cache, cache, system, and data, then flash a custom rom but it ended up getting endless bootanimation unable to boot into the custom rom.
I did unlock the bootloader with the adb code, flashing a temporary recovery was a success but endless bootanimation happened after flashing a custom rom. The custom rom was successfully installed according to TWRP's log.
Pls advice, thanks in advanced
P.s: I was referring to my friend's device X9076

Hi, i tried in the past some roms than not works, phone stuck in boot animation. The roms wich works for me and my x9076 with r63419 are:
Omnirom (6 or 5) THE BEST
Project Spectrum
Cyanogen 13 (modified version for new panel: http://community.oppo.com/en/forum.php?mod=viewthread&tid=44907&extra=)
Miui
If you install CM13, you need to flash unified partition script for CM13 (you can find it in the same post from the forum Oppo Community)
For the other roms i dont need to flash anything else than rom and gapps.
Now i give a chance to CM13, but i think that i will get back to Omni if developers dont fix the mobile radio issue.
Cheers

Can anyone guide me please, 1st time i bought MTK phone Oppo F7, its update automatically but suddenly dead like stuck on logo and restarting again and again, i didnt ever flash MTK phone, neither i have any android tool like MRT dongle or any other flash USB or Box... Kindly guide me step by step how to flash with which tool only USB cable and PC... Thanks in advance

Cant boot to recovery

Hello guys,
After doing oem unlock with fastboot ,i've tried to flash TWRP recovery but after the comand i cannot acess recovery, it just reboots. Tried several recovery images and read alot of toturials but with no sucess!! Win10 64bits computer here.
Thanks,
NightSource

Nightsource said:
Hello guys,
After doing oem unlock with fastboot ,i've tried to flash TWRP recovery but after the comand i cannot acess recovery, it just reboots. Tried several recovery images and read alot of toturials but with no sucess!! Win10 64bits computer here.
Thanks,
NightSource
Click to expand...
Click to collapse
Did you hold the volume down button + power button to get to recovery mode manually right after flashing?
Gesendet von meinem ONEPLUS A3003 mit Tapatalk

If you have successfully unlocked the bootloader, you'll get a bootloader unlocked warning every time you boot. On the warning screen, click either of the volume buttons and you'll be redirected to a bootup menu. From there, you can select "boot to recovery" using the volume rocker and power button.
Alternatively, enable "advanced reboot" in developer options and reboot to recovery from the main OS power menu.
If these don't work, reflash TWRP using fastboot. Make sure that you're using at least version 3.0.3-1, best to use 3.0.4-1.

Tried manually reboot into recovery but it just reboots,
I can sucessfully unlock as i have the warning on boot, but there if i go to the menu and press for recovery it just reboots, tried several tipes of recovery TWRP imgs
Any help greatly wanted

Download this version of TWRP (jcadduono's 4.0.3-1). Rename the file to something like twrp.img.
1) Make sure adb/fastboot is working on your computer (if you've already unlocked the bootloader, then I am assuming it is).
2) Put your phone into fastboot mode and connect it to your computer. Open a command prompt where you can access fastboot.
3) Put the twrp.img file to the same folder where you opened your command prompt.
3) Enter
Code:
fastboot devices
in fastboot and make sure your phone shows up with its serial number.
4) Enter
Code:
fastboot erase recovery
to erase your current recovery
5) Enter
Code:
fastboot flash recovery [B]twrp.img[/B]
, where twrp.img is whatever you named your twrp file.
6) Enter
Code:
fastboot reboot
to reboot into your main system. You can either reboot then use advanced startup to enter recovery, or press a volume button at the bootloader warning page to boot directly to recovery.

Anova's Origin said:
Download this version of TWRP (jcadduono's 4.0.3-1). Rename the file to something like twrp.img.
1) Make sure adb/fastboot is working on your computer (if you've already unlocked the bootloader, then I am assuming it is).
2) Put your phone into fastboot mode and connect it to your computer. Open a command prompt where you can access fastboot.
3) Put the twrp.img file to the same folder where you opened your command prompt.
3) Enter
Code:
fastboot devices
in fastboot and make sure your phone shows up with its serial number.
4) Enter
Code:
fastboot erase recovery
to erase your current recovery
5) Enter
Code:
fastboot flash recovery [B]twrp.img[/B]
, where twrp.img is whatever you named your twrp file.
6) Enter
Code:
fastboot reboot
to reboot into your main system. You can either reboot then use advanced startup to enter recovery, or press a volume button at the bootloader warning page to boot directly to recovery.
Click to expand...
Click to collapse
Sometimes it helps to use fastboot to boot the image directly after you flash it. This ensures you get into recovery since it loads it off your computer.
It should then work normally afterwards
Sent from my ONEPLUS A3000 using Tapatalk

Root Armani in 2018

Method 1:-
Download Custom Recovery for armani in your pc and rename it to recovery.img
and download root zip and paste it in your sdcard
Download 15 seconds adb & fast drivers and follow the instructions....
In pc type the following commands by opening cmd from shift+right click and open command prompt here after connecting the device to pc
Code:
adb devices
after successful install of drivers you will see the device listed in that
Code:
adb reboot bootloader
After rebooting into fastboot mode type the following commands
Code:
fastboot flash recovery recovery.img
after successful flashing of recovery then type this
Code:
fastboot reboot recovery
Flash SuperSU/Koush superuser in your TWRP/CWM/Philz recovery
Method 2:- Download Kingo ROOT and root
Method 3:- Download Kingo ROOT pc version in your pc and load it and connect your device to pc and root....
Method 4:- Download KingRoot and click to root....if it fails in first attempt, try atleast 5 times...

Yes these are indeed the best methods to root this phone.
Also, note that Magisk will not work for the stock MIUI because the phone has Android 4.4 and Magisk probably requires 5.0+. So, Magisk should be used for newer custom ROMs.
HemanthJabalpuri said:
I want to root my MIUI 9 armani in 2018.....
I don't have PC
Click to expand...
Click to collapse
Also, like you had said earlier, if you don't have a PC due to some reason, you can use another phone or tablet for that purpose (to flash the custom recovery). I've read somewhere that most Android devices having 5.0 and below came preloaded with adb fastboot binaries (for newer Android phones, you can easily obtain the binaries online and add them into the /system/bin folder if it is rooted) and hence you can connect your Redmi to this other device using an OTG cable and use the shell (any terminal app) to issue the commands. The only important thing to be considered in this approach is that the other (host) device should have a big enough battery to be able to provide sufficient current to the Redmi phone such that it should not get disconnected during the process.
This method is usually ignored by people, but it really works.

Reserved

Reserved

Code:
$ fastboot reboot recovery
fastboot: usage: unknown reboot target recovery
Cannot issue the last command.
When I flash TWRP and reboot nothing happens. Same Mi Recovery is present.
I am on MIUI 9. Not rooted. I am trying to get a custom recovery but I fail. Please help.

blazzer12 said:
Code:
$ fastboot reboot recovery
fastboot: usage: unknown reboot target recovery
Click to expand...
Click to collapse
Are you sure recovery was flashed properly?
Try this while in fastboot mode :-
Code:
fastboot devices
Make sure that your device is listed properly.
Try this
Code:
fastboot erase recovery
fastboot flash recovery <path to recovery img>
Then reboot using
Code:
fastboot reboot recovery
If still doesn't work out, try to directly boot into recovery image
Code:
fastboot boot <path to recovery img>
If still doesn't work out, then there might be a problem with the fastboot binary on the PC, try to reinstall the latest version of it on the PC and try again.
---------- Post added at 22:03 ---------- Previous post was at 21:55 ----------
blazzer12 said:
When I flash TWRP and reboot nothing happens. Same Mi Recovery is present.
Click to expand...
Click to collapse
If the issue is specific to TWRP Recovery, try to flash other recoveries. For example, older version of TWRP or maybe try Philz Touch recovery as well.

Yes, the fastboot devices is being listed. Still #2 didn't work. But #3 worked perfectly.
So for me flashing recovery didn't work. I had to temporarily boot into the recovery and then again flash the recovery from there.
Thank you for the help. :good:

Now we can root with Magisk too...
https://forum.xda-developers.com/ap...v7-universal-systemless-t3473445/post78829088
Note:- Magisk v22.1 is the last version to support Android 4.4.2

No OS is installed. Moreover recovery cannot be accessed. Nor can flash it via adb.

Previously I was using Ressurection Remix treble rom which is based on android 9 pie. I went to TWRP and wiped the OS. Then I tried to install a new rom called Dot OS. But it showed error 7. So I flashed Vendortofactory zip within twrp and without rebooting again into TWRP I flashed a new TWRP image within TWRP by selecting Recovery mode. After that I cant boot into TWRP and as already my OS is gone I also cannot boot into any system. Moreover my device is not getting detected in my PC. I cannot install TWRP by writing commands in cmd, while the phone is in fastboot mode as the device is not getting detected in my pc. Really it is urgent. I will be glad if someone helps me. Thanks in advance.

What is the present booted state of your device? Are you in twrp, or bootloader. Most of the time you can keep on pressing the power button. When it boots into a message about unlocked bootloader, press volume button to select recovery and it will boot into twrp

You should be able to boot in fastboot mode without recovery nor os, maybe your drivers are not working on windows? Try different usb ports, check if the display says "bootloader" or something. If nothing works try the usb shunt, this device is literally 'unbrickable' if it's working properly.

Watch this video(https://www.youtube.com/watch?v=DexLELi04XY) and then you will be able to detect your phone in your pc in qcom 9008 mode , then use qfil to flash ZUI firmware ,there are plenty of tutorials on the internet for that ,then follow the proper procedure mentioned in DotOs thread for flashing the new rom .
Hope it helped .

If you don't want to flash the firmware and all long process just follow the following steps
Enter in to the boot loader make sure you installed all the drivers in to pc then open cmd windows in adb fastboot folder and enters the following cmd into the cmd
Fastboot -i 0x2b4c devices this will detect your device
After that enter
Fastboot -i0x2b4c flash recovery recovery name.img
And boom you are good to go flash the rom of your choice and enjoy
For this process you need following files
Adb and fastboot devices
Drivers of zuk z2
Latest recovery and place revovery image file into the adb and fastboot folder if you are confused about anything pm me i am not the expert but i faced simillar problem and solved by this method

yashpatel1221 said:
If you don't want to flash the firmware and all long process just follow the following steps
Enter in to the boot loader make sure you installed all the drivers in to pc then open cmd windows in adb fastboot folder and enters the following cmd into the cmd
Fastboot -i 0x2b4c devices this will detect your device
After that enter
Fastboot -i0x2b4c flash recovery recovery name.img
And boom you are good to go flash the rom of your choice and enjoy
For this process you need following files
Adb and fastboot devices
Drivers of zuk z2
Latest recovery and place revovery image file into the adb and fastboot folder if you are confused about anything pm me i am not the expert but i faced simillar problem and solved by this method
Click to expand...
Click to collapse
This assumes u have upgraded bootloader to 4.4 kernal.
U can still boot into twrp.. When the phone is booting up press vol up key and select recovery.. From there boot into twrp. There select f2v or v2f .. Then flash twrp which u want to flash.. Reboot to recovery.. U will get promp no os installed.. Ignore and reboot to recovery . Then again d9 f2v or v2f depending on what rom to install.. Again reboot to recovery... Then flash rom of ur choice.
This procedure is needed when changing from vendor to factory and vice versa.

sanjay.2704 said:
This assumes u have upgraded bootloader to 4.4 kernal.
U can still boot into twrp.. When the phone is booting up press vol up key and select recovery.. From there boot into twrp. There select f2v or v2f .. Then flash twrp which u want to flash.. Reboot to recovery.. U will get promp no os installed.. Ignore and reboot to recovery . Then again d9 f2v or v2f depending on what rom to install.. Again reboot to recovery... Then flash rom of ur choice.
This procedure is needed when changing from vendor to factory and vice versa.
Click to expand...
Click to collapse
I don't understand what you are talking about as i say i am not some kind of technical expert i am here help regarding this i faced similar situation where i am not able to enter into recovery and also not able to enter into the os and when i restart the phone it automatically boot into fast boot mode what ever option i select and i solved my problem by this method

How To Guide How To Install Xiaomi.eu With Root

Oke First You Download The Twrp And Xiaomi.eu rom
Twrp : https://forum.xda-developers.com/t/recovery-alpha-teamwin-recovery-project.4272625/
Xiaomi.eu Rom : https://androidfilehost.com/?fid=14943124697586375669
Adb And FastBoot
For Windows: Download Link
For Linux: Download Link
For macOS: Download Link
and open Adb And FastBoot Now coppy The Twrp To Adbfastboot And rom to phone and twrp coppy to phone too and now Open Cmd And You Connect Usb To Phone And Go fastboot With Power Off The Phone And You can Press Power With Vol - if done You Type In Cmd fastboot boot (yournametwrp.img)
if done You Advanced in phone install ramdisk And Click That twrp coppying And Now Wipe and advanced and wipe dalvik after done Flash Your Rom And Install Ramdisk again And Twrp Reboot to System And waiting 5min Done Thx
Now Go Twrp Again And Flash Your Magisk.zip Reboot install the apk done
Note *IF LOCKED JUST LOGIN YOUR MI ACC*