I'm currently new around here so I didn't know where to discuss this but that's not an excuse but I'm currently looking for a build. prop for my LG G4 stylus since I modified it and want my previous settings and failed to make a backup. But if you can assist me I'll greatly appreciate it
PikachuShock said:
I'm currently new around here so I didn't know where to discuss this but that's not an excuse but I'm currently looking for a build. prop for my LG G4 stylus since I modified it and want my previous settings and failed to make a backup. But if you can assist me I'll greatly appreciate it
Click to expand...
Click to collapse
I am in need of this as well.. were you able to get a copy of buildprop?
hawleynicole said:
I am in need of this as well.. were you able to get a copy of buildprop?
Click to expand...
Click to collapse
Nope
Not on my end
Related
Hey everyone, i was doing some things with my rooted verizon g3 and didn't back up my build prop... Is there anyone that can give me a copy of their stock build prop PLEASE? Thank you very much in advance
Florida_Bwoi said:
Hey everyone, i was doing some things with my rooted verizon g3 and didn't back up my build prop... Is there anyone that can give me a copy of their stock build prop PLEASE? Thank you very much in advance
Click to expand...
Click to collapse
I think I did this correctly. If not, let me know.
https://www.dropbox.com/s/mvrond1umjujgtb/build.prop?dl=0
Hey, sorry took so long to get back. I appreciate the effort to help, but unfortunately it soft bricked my phone. I tried to restore to stock but computer wouldn't install the usb drivers so it wouldn't read my phone to be able to push the files, so i had to order another. Thanks again though
Sent from my VS985 4G using XDA Free mobile app
OK I was asked a couple of times if I was going to make the CTT mod (cpu thermal throttling mod) for the G4
What I ended up achieving on this mod for the G3 was eliminating all lag improving performance and as a bonus I found a way to also reduce the heat generated by the battery and phone.
So I'm hoping to achieve the same thing for the G4
Thanks Rob
OK forth version is up please leave feedback I'm only going to make small changes with each version so I know if something gets better or worse and I know what to change
You can either flash the zip thru twrp or extract the files and replace yours with these Just be sure to back up your originals first
G4 thermal mod beta v-2
https://www.androidfilehost.com/?fid=24052804347809406
G4 thermal mod beta v-3
https://www.androidfilehost.com/?fid=24052804347809448
G4 thermal mod rc v-4
https://www.androidfilehost.com/?fid=24052804347828892
G4 thermal mod rc v-2.1
https://www.androidfilehost.com/?fid=24052804347838652
G4 thermal mod beta v-5-
https://www.androidfilehost.com/?fid=24588212152305146
Return to stock
https://www.androidfilehost.com/?fid=24052804347804079
Remember to make a nandriod backup first as I take no responsibility for what you do to your phone
And here's a link to the mod for the G3 so you can see what it's all about
http://forum.xda-developers.com/lg-g3/development/thermal-mod-t2907363
Quick note to all ROM and kernel developers please feel free to use my mod just please give proper credit Thanks
And please don't forget to hit thanks also give it a 5 star rating if you feel it deserves it
Thanks Rob
Here are the files for the US VS986 VZW variant. By the way, good to see you over here.
https://dl.dropboxusercontent.com/u/25795010/thermal-engine-8992.conf
https://dl.dropboxusercontent.com/u/25795010/thermal-engine-default.conf
Hello
I have the INTL H815 with latest open EUR Firmware V10C. Which files you Need? Remember, if possible, that G4 is 64bit based. If u tell me, i can send u the recommended files. And...please find a way, that we can Change the needed files without custom recovery, cause custom recovery we not have all, cause not everybody wants to open for that the bootloader. I think it is possible to Change the files via a root Explorer right?
Ok which files u Need?
Chris
takeoff342 said:
Hello
I have the INTL H815 with latest open EUR Firmware V10C. Which files you Need? Remember, if possible, that G4 is 64bit based. If u tell me, i can send u the recommended files. And...please find a way, that we can Change the needed files without custom recovery, cause custom recovery we not have all, cause not everybody wants to open for that the bootloader. I think it is possible to Change the files via a root Explorer right?
Ok which files u Need?
Chris
Click to expand...
Click to collapse
Under system/etc the thermal and thermald files if you have them
Yes via root explorer and you'll be able to just delete the ones you have and replace them with the ones I provide
phillymade said:
Here are the files for the US VS986 VZW variant. By the way, good to see you over here.
https://dl.dropboxusercontent.com/u/25795010/thermal-engine-8992.conf
https://dl.dropboxusercontent.com/u/25795010/thermal-engine-default.conf
Click to expand...
Click to collapse
I'm gonna try to have something for you to test by the end of the weekend
H815 All Thermal files
https://www.androidfilehost.com/?fid=24052804347798630
Thanks..
Robshr said:
I'm gonna try to have something for you to test by the end of the weekend
Click to expand...
Click to collapse
I'm in. Let me know when it's ready
ATT H810 10B
Thermal Files
Sprint LS991ZV5 stock rom & kernel.
https://www.dropbox.com/s/7gsm7ponwnhhe7v/thermal-engine-default.conf.txt?dl=0
https://www.dropbox.com/s/olzuviwrkgktm50/thermal-engine-8992.conf.txt?dl=0
---------- Post added at 06:56 AM ---------- Previous post was at 06:55 AM ----------
phillymade said:
Here are the files for the US VS986 VZW variant. By the way, good to see you over here.
https://dl.dropboxusercontent.com/u/25795010/thermal-engine-8992.conf
https://dl.dropboxusercontent.com/u/25795010/thermal-engine-default.conf
Click to expand...
Click to collapse
Is there anyway you can post the actual file not just a screen shot it would be a great help thanks Rob
Hi Rob,
here the files from the H815 open EUR Modell actual FW V10D from 21.07.15 (actualest for the EUR Branding free model)
https://my.pcloud.com/publink/show?code=XZ0g40Z13cUW0YSE5uV3SJD6SV2HJr3IagV
https://my.pcloud.com/publink/show?code=XZRg40ZRGhr38Ez89B737Y89CdQmFC48Dh7
Greetz Chris
Here r the us991 us cellular files
https://mega.nz/#!rsJ23a5K!tCpDGGxJDqTxYjZmPHqkzS72L96PPshWyuYeOoaeUqo
https://mega.nz/#!u0pkSS4K!1l-bQLx1r0fyD33C7QekzywMN15Dhw7VJzRHKfG1Nl0
H815L:
https://drive.google.com/open?id=0B5W0DaSG0ABITkRxUVlLQm56bWc (Thermalengine Default)
https://drive.google.com/open?id=0B5W0DaSG0ABIWHBqcjE4TjhUcFk (Thermal Engine 8992)
Robshr said:
Is there anyway you can post the actual file not just a screen shot it would be a great help thanks Rob
Click to expand...
Click to collapse
Check your pm
LG-H818P :
https://mega.nz/#!WQUXGaxD!gozszgknw7qafPSy9KE-9Wgd7mOG0PeeY4-gxMAYV6c
thnx
Thats great. Ive been using your mods as reference on my G4 with good performance results. There Is a problem. The heat warnings and force shutdowns are gonna bother us when playing games or other heavy stuff. Hope some body can disable or tweak when those warning show up. I willing to test on my h 811
robshr said:
ok i was asked a couple of times if i was going to make the ctt mod for the g4 and now that all variants have root i'd like to start working on one but i need the thermal files from all the variants so if you all can help me out by posting your thermal and if you have them the thermald files and tell me what variant and what rom if it's stock based or not and what kernel. I can than get started on bringing the mod to the g4s
thanks rob
and here's a link to the mod for the g3 so you can see what it's all about
http://forum.xda-developers.com/lg-g3/development/thermal-mod-t2907363
Click to expand...
Click to collapse
lg-h815t v10b
All thermal files for h811
http://www.mediafire.com/download/jsx3j3p52u5dukl/h811.zip
Sent from my LG-H811 using Tapatalk
This mod is similar to the dorimanx kernel for the g2
And Rob? how is it? you are on your way?
Just got a couple of LG G4's on VZW and of course out of the box it has a 'System Update Ready to Install' message. Currently they're running 5.1 and everything feels fine. What version is this update & does a root exist for it currently should I decide to root in the not-too-distant future?? I'd like to uninstall the bloat but so far I don't have a pressing issue to root other than that so it's not a pressing issue currently. Is there a way I can see what update it's trying to push so that I may search for a changelog to see if there's any changes I would benefit from?
Thanks for the help!
I'm sure this is the wrong section because this forum is a mystery to me in that way and they seem to intentionally make it confusing to find forums, subforums and then know which your post belongs in so if someone is offended by my posting this here and has the power feel free to relocate it to a less offensive area. Thank you.
Anyone? A link? Anything?
OstrichSak said:
Anyone? A link? Anything?
Click to expand...
Click to collapse
Dude,I would really like to help you, but I'm a total noob. Try your luck to H11 section, maybe they can help you.
It's just a basic update to fix some small issues
Sent from my VS986 using Tapatalk
let it update to 13b, i have a walk through that will help if you are new to this
http://forum.xda-developers.com/verizon-g4/help/lgg4-13b-root-vs986-t3268354
hope this helps
New OTA captured...merry christmas.
Blur_Version.26.11.51.sperry_sprint.en.US
CodyF86 said:
New OTA captured...merry christmas.
Blur_Version.26.11.51.sperry_sprint.en.US
Click to expand...
Click to collapse
Thanks, same to you. Did you install this with no problems with the bootloader unlocked?
I have'nt installed it was hoping someone would be able to extract the good stuff and make a zip.
CodyF86 said:
I have'nt installed it was hoping someone would be able to extract the good stuff and make a zip.
Click to expand...
Click to collapse
Just wondered. I'll see what I can do with it.
CodyF86 said:
I have'nt installed it was hoping someone would be able to extract the good stuff and make a zip.
Click to expand...
Click to collapse
You can probably just remove all the assert prop lines and install it.
madbat99 said:
You can probably just remove all the assert prop lines and install it.
Click to expand...
Click to collapse
That doesn't always work quite right. I just flashed stock firmware and updated. Finally got the September security patch. I'll upload flashables of the imgs and make a flashable ROM later on.
Does anybody else find it weird that the signal indicator has reverted back to the KitKat style... I don't get why they changed it, looks so dated.
But it is nice that you guys finally got the BlueBorne patch, next up should be the KRACK patch - fingers crossed.
ATTACK said:
Does anybody else find it weird that the signal indicator has reverted back to the KitKat style... I don't get why they changed it, looks so dated.
But it is nice that you guys finally got the BlueBorne patch, next up should be the KRACK patch - fingers crossed.
Click to expand...
Click to collapse
Yeah, we'll probably get that in March or April.
volatile1 said:
That doesn't always work quite right. I just flashed stock firmware and updated. Finally got the September security patch. I'll upload flashables of the imgs and make a flashable ROM later on.
Click to expand...
Click to collapse
Would you mind doing the same for the retail (XT1768) variant? Flashing back to stock didn't help in my case. I got the same "status 7" error as another person here. I looked at the update's updater-script, but not being conversant with the particular script language I didn't want to take the chance. Failing that, you can just tell me the correct way to edit the script file. "Blur_Version.26.11.46.perry.retail.en.US.zip" is linked below.
https://drive.google.com/file/d/1ju_Au1_M9yHqBNGW4-mXAIZS3iJd0B95/view?usp=sharing
e.mote said:
Would you mind doing the same for the retail (XT1768) variant? Flashing back to stock didn't help in my case. I got the same "status 7" error as another person here. I looked at the update's updater-script, but not being conversant with the particular script language I didn't want to take the chance. Failing that, you can just tell me the correct way to edit the script file. "Blur_Version.26.11.46.perry.retail.en.US.zip" is linked below.
https://drive.google.com/file/d/1ju_Au1_M9yHqBNGW4-mXAIZS3iJd0B95/view?usp=sharing
Click to expand...
Click to collapse
Sorry. Changed my mind, I'm not posting anything anymore. A user I see in another thread makes my want to go get a different phone now that he's around here. He's a giant douche. I think I'm going to keep to myself. Have fun guys.
Can any someone that has installed the ota do me a favor and pull the modem.xx files from /firmware and possible the fsg from /fsg, I''d like to build cm with them but i can't install the ota at this point I have working lte on lineage and im not screwing that up heh.
Maybe this will make it easier for others to get lte on lineage.
CodyF86 said:
Can any someone that has installed the ota do me a favor and pull the modem.xx files from /firmware and possible the fsg from /fsg, I''d like to build cm with them but i can't install the ota at this point I have working lte on lineage and im not screwing that up heh.
Maybe this will make it easier for others to get lte on lineage.
Click to expand...
Click to collapse
I haven't updated yet (no time). But I will probably flash back to stock and update this week or weekend. If (when) I do, I'll get it for ya.
---------- Post added at 06:50 PM ---------- Previous post was at 06:47 PM ----------
volatile1 said:
Sorry. Changed my mind, I'm not posting anything anymore. A user I see in another thread makes my want to go get a different phone now that he's around here. He's a giant douche. I think I'm going to keep to myself. Have fun guys.
Click to expand...
Click to collapse
Guess your username is pretty accurate, lol. Just kidding bro. We only do this stuff if it's still fun. the minute it's not fun, well hey, keep it fun dude.
CodyF86 said:
Can any someone that has installed the ota do me a favor and pull the modem.xx files from /firmware and possible the fsg from /fsg, I''d like to build cm with them but i can't install the ota at this point I have working lte on lineage and im not screwing that up heh.
Maybe this will make it easier for others to get lte on lineage.
Click to expand...
Click to collapse
Here's the new modem.img and fsg.mbn
https://www.androidfilehost.com/?fid=745849072291693264
I suppose I'll make a flashable of the rest of it when I have time. I think it would be safer to just pull all the imgs of everything that was patched so it would be sort of like a twrp flashable stock firmware. I don't want to see anyone's phone get bricked. There were a lot of patches. I'll see..
If anyone else gets the idea to flash this, it might not work with the old rom. The old modem doesn't work with the new update.
madbat99 said:
Guess your username is pretty accurate, lol.
Click to expand...
Click to collapse
Yes it is.
volatile1 said:
Here's the new modem.img and fsg.mbn
https://www.androidfilehost.com/?fid=745849072291693264
I suppose I'll make a flashable of the rest of it when I have time. I think it would be safer to just pull all the imgs of everything that was patched so it would be sort of like a twrp flashable stock firmware. I don't want to see anyone's phone get bricked. There were a lot of patches. I'll see..
If anyone else gets the idea to flash this, it might not work with the old rom. The old modem doesn't work with the new update.
Yes it is.
Click to expand...
Click to collapse
Looks like you got the plus, nice. How is it?
madbat99 said:
Looks like you got the plus, nice. How is it?
Click to expand...
Click to collapse
Nice. A little bigger and heavier with a fp sensor.
Sent from my Moto E (4) Plus using XDA Labs
@CodyF86 I just found some missing libs that I don't know how I missed before. They very well may be the solution. I'll test it out, but will need someone with an activated device to know for sure if it works because I activated my E4 Plus. I should know if I see Boost Mobile for the carrier though. I'll have something to test before the day is over.
Edit: scratch that, turns out they were all there after all. Damnit!
Sent from my Moto E (4) Plus using XDA Labs
is the OP firmware OTA targeted solely for Sprint variant?
surroundedbydrones said:
is the OP firmware OTA targeted solely for Sprint variant?
Click to expand...
Click to collapse
Yep. Sprint, boost, virgin Mobile.
ATTACK said:
Does anybody else find it weird that the signal indicator has reverted back to the KitKat style... I don't get why they changed it, looks so dated.
But it is nice that you guys finally got the BlueBorne patch, next up should be the KRACK patch - fingers crossed.
Click to expand...
Click to collapse
Yeah I noticed. Changed it with xposed.
After the update to 26.69-56 I'm finally getting lte+
Hey guys so I switched from Samsung to the OnePlus 5T and I want to get new emojis, these stock android ones are not nice at all. I was wondering if anyone could give me some advice or tell me how I can get some new emojis please. Thank you
Are you rooted?
Pfeffernuss said:
Are you rooted?
Click to expand...
Click to collapse
Not yet as I didn't want to root it if I didn't need to. I have Odin and ADB and stuff so just need some help with rooting tbh new to this
MamaROM said:
Not yet as I didn't want to root it if I didn't need to. I have Odin and ADB and stuff so just need some help with rooting tbh new to this
Click to expand...
Click to collapse
If rooted it's quite simple (replace Notocoloremoji font) but if not rooted than no idea, don't think it'll work :good: