[ROM][LineageOS][17.1][UNOFFICIAL][Nexus10] - Nexus 10 Android Development

[ROM][LineageOS][17.1][UNOFFICIAL][Nexus10] - Nexus 10 Android Development

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS
lineage-17.1-20230404-UNOFFICIAL-manta.zip
Known issues:
- Pls disable "Adaptive brightness" in display settings -> sensor service problems.
- GPS is not working and has been disabled completely
- NFC is not working and has been disabled completely
- Stuttering sound in Chrome based browsers.
- Watchdog has been (partially) disabled - in case of crash/bug you may need to reboot using power button.
- Camera is not working .. same problem like on Nougat. (broken HAL1 camera and unsupported HAL2 camera)
- Encryption seems not to work - and has not been tested. -> Pls do not encrypt your data partition yet.
lineage-16.0-20200913-UNOFFICIAL-manta.zip (DISCONTINUED) -> Pls check here for new builds !
Known issues:
- HWC (hardware composer) is partly broken (icons are not shown correctly and black home screen - some overlays have problems .. etc.)
- Encryption seems not to work - and has not been tested. -> Pls do not encrypt your data partition yet.
- NFC may not work correctly and drains a lof of battery - Pls disable thru settings menu.
- If you set pin, pattern or password to unlock the device pls be patient - if you press "confirm" the system is freezing for a few minutes - just wait.
- Camera is not working .. same problem like on Nougat. (broken HAL1 camera and unsupported HAL2 camera)
lineage-15.1-20190516-UNOFFICIAL-manta.zip (DISCONTINUED) -> Pls check here for new builds !
Known issues:
- Encryption seems not to work - and has not been tested. -> Pls do not encrypt your data partition yet.
- Headphone jack is not fully working (Pls use the "AudioJack" kernel -> 3.4.67 - current standard kernel for all Oreo ROMs)
- If you install Magisk, pls disable Magisk "Hide" feature. (3.4.113 kernel issue)
- NFC has been taken out - still not working.
- Camera is not working .. same problem like on Nougat. (broken HAL1 camera and unsupported HAL2 camera)
- If you set pin, pattern or password to unlock the device pls be patient - if you press "confirm" the system is freezing for a few minutes - just wait.
lineage-14.1-20181218-UNOFFICIAL-manta.zip (DISCONTINUED) -> Pls check here for new builds !
Known issues:
- Camera is not working (broken HAL1 camera and unsupported HAL2 camera)
- Headphone jack is not fully working
Due to the new kernel sources the Audio jack will not work correctly anymore. (2017-07-27)
If you need working Audio jack - pls install this kernel via TWRP: manta-kernel-lineage_20170509.zip
Installation:
1. Boot into TWRP
2. Wipe system, cache, dalvik and data. (Not required if you upgrade from previous build)
3. Install lineage-xx.x-yyyyyyyy-UNOFFICIAL-manta.zip
4. install opengapps or beansgapps (optional)
5. install SuperSU.zip and/or Magisk.zip
6. Reboot into system ..
- Please install Magisk.zip and/or SuperSu.zip yourself.
- Due to systemless rooting - if you have installed magisk and/or supersu before you need to install it again !
- If you install SuperSu.zip it will boot twice - no panic, it's normal !
- If you had gapps installed before you don't need to install gapps again - the installer will take care.
- If you face any strange issues, pls do a factory reset via TWRP first.
- If you have problems with SetupWizard from opengapps - pls install opengapps after first system boot.
- BeansGapps SetupWizard should have no problems at all !
System and Cache repartitioning / Opengapps: Error 70
The current system partition is (getting) full !
You need to do repartition your system and cache partitions .. either via TWRP package or manually via shell.
It's an one time task.
But the filesystem of the system.img inside the ROM will keep always the same size .. approx. 800mb.
The filesystem does not know the "real" size of the actual partition.
In general .. If you install an image into a partition the filesystem will have the size of the image (in our case 800mb).
The free space we got thru repartitioning needs to be allocated again.
For this reason we need to enlarge/resize the filesystem after each ROM update and/or clean install.
Only the filesystem .. the partition itself will stay untouched.
The automatic enlarge/resize of the filesystem is part of the ROM installer.
For manual repartitioning have a look here:
https://forum.xda-developers.com/showpost.php?p=77759823&postcount=953
https://forum.xda-developers.com/showpost.php?p=77762148&postcount=954
For automatic repartitioning have a look here:
https://forum.xda-developers.com/showpost.php?p=77764246&postcount=957
https://forum.xda-developers.com/showpost.php?p=77770425&postcount=960
https://forum.xda-developers.com/showpost.php?p=78219279&postcount=1059
@ipdev - Thanks for your TWRP flashable repartitioning package !
SOURCES:
If you want to build your own ROM .. just use my slightly modified manifest.
https://github.com/followmsi/manifests/tree/manta-lineageos-cm-14.1
https://github.com/followmsi/manifests/tree/manta-lineage-15.1
https://github.com/followmsi/manifests/tree/manta-lineage-16.0
https://github.com/followmsi/manifests/tree/manta-lineage-17.1
Download:
https://androidfilehost.com/?w=files&flid=289294
https://drive.google.com/drive/fold...NOW5CdVk?resourcekey=0-sy5DtNinV0vaxAlPd8adpw
Enjoy lineageOS on your Nexus 10 ..

Is camera working?

No it is not. As in all nougat roms for manta.
---------- Post added at 08:18 ---------- Previous post was at 08:15 ----------
The question is if the fix of the cropping issue is implemented in LOS

Until the next official TWRP version is ready ...
Update.ZIP_TWRP_manta_3.0.3-0.zip -> to be installed via TWRP
TWRP_manta_3.0.3-0.img -> to be installed via fastboot
Build on fresh Nougat sources ..
Same download folder ... https://drive.google.com/open?id=0By6p5AdQfavBNHkxVWhNOW5CdVk
Cheers

Thx, I'm waiting for this, do we have any info when will be official Lineage nightly builds?

I tried to install this ROM after a Factory-Reset.
After Boot-Animation there is no possibility to go any further at the large LOS-Logo.
I used TWRP 3.0.2 for Installation.
Any hints?
Regards,
Jörg

Same here. I tried the official TWRP & the TWRP recommended above, after doing factory reset. Both = bootloop. . . Sumpthin' ain't right

Intruder73 said:
I tried to install this ROM after a Factory-Reset.
After Boot-Animation there is no possibility to go any further at the large LOS-Logo.
I used TWRP 3.0.2 for Installation.
Any hints?
Regards,
Jörg
Click to expand...
Click to collapse
Pls wipe system before installation.
Do you have f2fs partitions ? data ? cache ?
The default lineageos manta kernel does not support f2fs !
Pls change file system of your partitions to ext4 via TWRP.
Will release a new version with f2fs support .. in a few days.

djd338 said:
Same here. I tried the official TWRP & the TWRP recommended above, after doing factory reset. Both = bootloop. . . Sumpthin' ain't right
Click to expand...
Click to collapse
Same here ..
Start with clean system and wipe system partition before.
Pls check if you have f2fs partitions ?
Thanks

followmsi said:
Pls wipe system before installation.
Do you have f2fs partitions ? data ? cache ?
Click to expand...
Click to collapse
Hi followmsi,
I did wipe System, Data, Dalvik Cache and Cache.
Only ext4 over here.
Regards,
Jörg

Intruder73 said:
Hi followmsi,
I did wipe System, Data, Dalvik Cache and Cache.
Only ext4 over here.
Regards,
Jörg
Click to expand...
Click to collapse
Pls Download again and Check checksum.
Start to Install from scratch.. after wipe.
Correct gapps version?
Cant replicate your issue.

OK.
Retried the whole thing. Only difference is that i did not Format data.
Sorry, but i did not read it as "you have to install 13.0 and must not wipe data".
Works now. But i think it should also work with wiping data.

Intruder73 said:
OK.
Retried the whole thing. Only difference is that i did not Format data.
Sorry, but i did not read it as "you have to install 13.0 and must not wipe data".
Works now. But i think it should also work with wiping data.
Click to expand...
Click to collapse
Yes, should work with wiping too.
Will be back on the next Weekend, will test myself.
Thanks

Intruder73 said:
Hi followmsi,
I did wipe System, Data, Dalvik Cache and Cache.
Only ext4 over here.
Regards,
Jörg
Click to expand...
Click to collapse
Yep, same here. Only ext4 too, with a very clean wipe of all. Will keep trying

djd338 said:
Yep, same here. Only ext4 too, with a very clean wipe of all. Will keep trying
Click to expand...
Click to collapse
You have to install a 13.0-ROM, wipe cache, dalvik and system - NOT Data - and then flash this ROM ...
(Or wait for followmsi to fix it )

Intruder73 said:
You have to install a 13.0-ROM, wipe cache, dalvik and system - NOT Data - and then flash this ROM ...
(Or wait for followmsi to fix it )
Click to expand...
Click to collapse
Thanks for your help.
I am on the Ski slope with my family.. will be back on next Weekend.
Will check this issue .. add f2fs to the kernel .. etc.
I will be back
Cheers

lineage os 14.1 manta
Resting on white background lineage on nexus 10

FYI, rom is running very well on my tablet. Very snappy & smooth. Great job!

zeubuntu said:
Resting on white background lineage on nexus 10
Click to expand...
Click to collapse
Pls install Lineage OS 13.0 first, the start to install CM14.1 like described on first page.
There is an issue if you do factory reset, please keep your data partiton untouched.

Back from the Ski slope ...
Made a new TWRP version .. including F2FS support .. Update.ZIP_TWRP_manta_3.0.3-1.zip
Added NTFS and F2FS into the manta kernel .. lineage-14.1-20170224-UNOFFICIAL-manta.zip.
But the annoying factory reset issue is still not solved .. hopefully soon.
For the next time - pls install Lineage OS 13 first !
Cheers

Related

[ROM][MM][6.0.1][M4B30X] CyanogenMod 13.0 (20161022-UNOFFICIAL)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What's working:
Audio
Wifi
Adoptable sdcard
Doze
Receiving and making calls
GPS
Compass
Proximity sensor
Bluetooth
USB mass storage
HW accelerated GUI
HW accelerated video
Camera
Torch
Wifi/USB tethering
USB OTG (Requires external power source)
Vsync
Hybrid ION/PMEM
What's not working/Buggy Functions:
720p recording
CM-13.0 Install Guide
Note: CM for Galaxy W is provided with no warranty. You are installing this software at your own risk. You may be violating your warranty.
NB! All CM builds from 2014-12-23 and after requires a new recovery! Read info further down.
Download CM-13.0 and gapps package and put in /sdcard
Download recovery: recovery-clockwork-6.0.5.1-ancora.zip
Flash it in old recovery. Then go to "advanced" menu, and select reboot recovery. When new recovery has loaded, select wipe data/factory reset, then go to "mounts and storage" menu and select format /system. Then select "format /data and /data/media" (NB. only needed the first time installing the rom). Now you should make sure you have put the rom file on an external sd card. Install that and gapps the normal way. You can also use adb sideload.
The change of partition layout is done because CM13 requires it, and implementing the same in CM12,CM11 make it easier for everyone to switch between them, since the same recovery can be used. For more info on the new layout, see here: https://github.com/arco/android_dev...mmit/d1cb921fb3ecd3e90a35da2af6a878aa294f168d
Another benefit is that it's now possible to install the full gapps package.
Download Section:
CM-13.0-2016-10-22-UNOFFICIAL https://mega.nz/#!SgtCSLBC!j522UYJce6vZUYlqoaA9KLFiltVb6gJK9xU4bOVrpkc
*Wifi fixed
*RIL and cam fixed
*Kernel compiled with GCC 4.9
*Performance profiles added
*Almost everything is working as expected
*Synced wih latest CM sources
CM-13.0-2016-05-26-UNOFFICIAL Download Link: http://www.mediafire.com/download/2lo29460e2al9a2/cm-13.0-20160526-UNOFFICIAL-ancora.zip
*Synced with upstream code base
*Say hello to gello(new CM web browser)
*Various updates
CM-13.0-20160330-UNOFFICIAL Download Link: http://www.mediafire.com/download/dgsm0co57tz8cvp/cm-13.0-20160330-UNOFFICIAL-ancora.zip
* Initial Release
***Please Do not mirror the links!
Note: Build date is old. İ will release new build with upstream synced ASAP
Google Apps (UPGRADE REQUIRED)
PA GApps
Micro Modular recommended
Before you install CM-13.0: Preparation (First three are optional. If you want to start fresh, these can be skipped)
Install AppBak from Market, run it and save a list of all your apps.
Install SMS Backup and Restore from Market, run it and backup your SMS history.
Install Call Logs Backup and Restore from Market, run it and backup your call log history.
Boot into CWM5 recovery. Make a full backup. You will need this backup later if you decide to go back to your previous ROM and data.
WARNING: Many apps will Force Close crash if you restore data from a previous ROM.
Install
Use CWM6.
Warning: Only use this recovery to flash CM-13.0. Otherwise, you risk bricking your phone, or you might experience boot and stability issues!
-Wipe data/factory reset
Under the "mounts and storage" menu:
-Format system
-Format data and data/media
Flash update*.zip.
Flash gapps*.zip. You must flash gapps after every upgrade to CM13.0 since /system is formatted, wiping your previous add-ons.
Reboot phone.
After you setup your Google account, reinstall the three apps from Market in order to restore most of your apps, call log and SMS history.
Warning: Do not restore backup data of system apps!
If you restore a bad backup with cached settings in telephony.db in data/data/com.*.*.telephony it can break MMS.
It seems that restoring backups can also break Calendar sync.
Upgrades
Upgrades from previous versions of CM13.0 are the same process as install, except you do not need to wipe anything. Contrary to popular belief, you do not need to even wipe cache and dalvik-cache when upgrading between CM13.0 versions. You only need to wipe if you are doing a major upgrade, switching to a different ROM entirely, or attempting to fix bugs caused by bad backups or corrupt app data.
Credits
CyanogenMod Team
Arco68
AriesVE DevConnection Team
Everyone that donated beers (Paypal link is in my profile)
Enjoy

Reserved

What, really??
Awesome Job bro! ?
Sent from my powerful Intel inside using Tapatalk

nilac said:
What, really??
Awesome Job bro!
Sent from my powerful Intel inside using Tapatalk
Click to expand...
Click to collapse
Nilac, woow... You are too fast bro thanx for everything and thanx for your help mate
as a note i have been using it for 6 months and used it for my personel usage and then i decided to share it with ancora users on all around the world i will build new release with upstream sources but than i probably won't build new release anymore...let's see...
As for dev note:
-New shimming lib method in cm-13 really made me crazy but i figured it out
-İ was struggling with wifi for more than 5 month with no luck i really dont know what change break the wifi...
-İ will push the source into git ASAP

sir mordred said:
Nilac, woow... You are too fast bro thanx for everything and thanx for your help mate
as a note i have been using it for 6 months and used it for my personel usage and then i decided to share it with ancora users on all around the world i will build new release with upstream sources but than i probably won't build new release anymore...let's see...
As for dev note:
-New shimming lib method in cm-13 really made me crazy but i figured it out
-İ was struggling with wifi for more than 5 month with no luck i really dont know what change break the wifi...
-İ will push the source into git ASAP
Click to expand...
Click to collapse
If you can link me the sources for Ancora I may have a look to ariesve too... After all we share the same board.
Sent from my powerful Intel inside using Tapatalk

Thanks so much.
For new job.
hm1313

nilac said:
If you can link me the sources for Ancora I may have a look to ariesve too... After all we share the same board.
Sent from my powerful Intel inside using Tapatalk
Click to expand...
Click to collapse
yes..of course bro will do it ASAP :good:

any possibility wifi can use?

@nilac i uploaded the changes into git but git rebuilded the whole tree i dont understand why did it happen... i also uplaoded the vendor side changes and i'm using kernel that branched on "updates" as a cm13 kernel

continuous restarts.

DtMeGA said:
continuous restarts.
Click to expand...
Click to collapse
make sure you are using cwm-6.0.5.1 or later...
and try clean install...
-wipe data/factory reset
-format system
-format /data and data/media

FAILED
Logs:
-- Installing: /sdcard/cm-13.0-20160330-UNOFFICI
AL-ancora.zip
Finding update package...
Opening update package...
Installing update...
E:Error flashing zip /sdcard/cm-13.0-20160330-UNOFFICI
AL-ancora.zip(Status 7)
Installation aborted.
How to fix this????

[email protected] said:
Logs:
-- Installing: /sdcard/cm-13.0-20160330-UNOFFICI
AL-ancora.zip
Finding update package...
Opening update package...
Installing update...
E:Error flashing zip /sdcard/cm-13.0-20160330-UNOFFICI
AL-ancora.zip(Status 7)
Installation aborted.
How to fix this????
Click to expand...
Click to collapse
You need to be on the latest recovery as @sir mordred specified
Sent from my powerful Intel inside using Tapatalk

whoa, cant believe this small and old phone was able to run Marshmallow
You did a great job, Sir Mordred. After all the years samsung left out this "uncapable" device, this community still found a way to flashing the latest software to this phone.
Salute!

sir mordred said:
Reserved
Click to expand...
Click to collapse
Good job brother,
How to fix WIFI ?

Wifi problem
Can anyone fix wifi issue?

wow, mm for ancora. That's stuning sir mordred ! :good:
best regards

You did it! My sincere congratulations!!!?
Sent from my A0001 using Tapatalk

Thanks @sir mordred for all your support . I have two questions.
-I can't use sdcard as internal sd. How can i fix this?
-You sad that use pa gapps but pa gapps discontiuned and when i install opengapps ı get error from some apps such as keyboard(unfortunately android keyboard has stopped etc.). Do you have any gapps package recommend for us or any solution?
Thanks for your reply.

tikanorcun said:
Thanks @sir mordred for all your support . I have two questions.
-I can't use sdcard as internal sd. How can i fix this?
-You sad that use pa gapps but pa gapps discontiuned and when i install opengapps ı get error from some apps such as keyboard(unfortunately android keyboard has stopped etc.). Do you have any gapps package recommend for us or any solution?
Thanks for your reply.
Click to expand...
Click to collapse
Use the Pico Opengapps ones... And make sure to download the arm version
Sent from my powerful Intel inside using Tapatalk

[ROM][UNOFFICIAL][ResurrectionRemix-P-v7.0.2][dragon] -> 20190624 (DISCONTINUED)

Make sure you have a custom recovery installed(TWRP is the preferred recovery)
Download the latest Resurrection Remix Rom & the latest GApps package
Boot into recovery
Perform a FULL factory wipe and wipe/system and dalvik cache as a precaution
Flash ResurrectionRemix Rom
Flash Google Apps package(Optional)
Flash Magisk Root(Optional)
First boot may take up to 10 minutes.
ROM Download
GApps
Resurrection Remix Source
Device Source
Kernel Source
Vendor Source
XDA Developers
LineageOs Team
Omni Team
And Of Course To All The Supporters, Donators And Users
If you have a major bug to report that has not been reported already, please take the following steps to report it to us. It will save you, Team Resurrection Remix and me quite some time.
Download the MatLog app from the Play Store.
After downloading the MatLog app, go to the app settings, and change the log level to Debug.
Clear all previous logs and take the exact steps to produce the error you are receiving. As soon as you receive the error (probably a force close), go straight into MatLog and stop the log recording.
Copy and paste the entire log either to Hastebin or Pastebin
Save the log, and copy and paste the link into the thread with a brief description of the error.

Known issues:
- Encryption seems not work - and has not been tested. -> Pls do not encrypt your data partition yet.
- Keymaster -> If you set Pattern, PIN or Password the Screen unlock may not work correctly.
Workaround for Pattern: On fresh boot you will need to wait a bit longer before you enter credentials.
The waiting time is required on fresh boot only, the following unlocks are working normally.
In case of problems pls use Update.ZIP_TWRP_flashable_pattern_pin_remover_V2.zip to remove pattern/pin or password.
XDA:DevDB Information
ResurrectionRemix, ROM for the Google Pixel C
Contributors
followmsi, apascual89, redukt
Source Code: https://github.com/ResurrectionRemix
ROM OS Version: 9.0 Pie
ROM Kernel: Linux 3.18.x
Based On: LineageOS
Version Information
Status: Stable
Current Stable Version: RR-P-v7.0.2-20190423
Stable Release Date: 2017-04-15
Created 2017-04-25
Last Updated 2019-06-24

Ok guys, this rom is ultimative for configuration nerds (like me) - tested it now since release and find no issues. Magisk root and hide is full integrated, OMS too. Did some tests with my new toy (Huawei Watch 2 4g) by playing with watchface tools on bluetooth connection - well... it´s stable!
Connected my B&W P5 wireless headphones and got no hickups!
Running this setup with an accelerator based wallpaper - the GUI is really fluid and smooth.
Some screens;

The blur & transparency options are realyl eyecatcher, check it out

New version arrived ..
RR-N-v5.8.3-20170503-dragon-Unofficial-followmsi.zip
Installation:
1. Boot into TWRP
2. Wipe system, cache, dalvik and data. (Not needed if you upgrade from previous build)
3. Install RR-N-v5.8.3-20170503-dragon-Unofficial-followmsi.zip
4. install open_gapps-arm64-7.1-xxxx-20xxxxxx.zip (optional)
5. install SuperSU-v2.79-201612051815.zip (optional - the RR ROM installer does not include Magisk installation)
6. Reboot into system ..
- If you had gapps installed before you don't need to install gapps again - the installer will take care.
- Due to systemless rooting - if you have installed supersu before you need to install SperSU.zip again !
- Due to supersu installation it will boot twice - no panic, it's normal !
- If you face any strange issues, pls do a factory reset via TWRP first.
- If you have problems with SetupWizard from opengapps - pls install opengapps after first system boot.
- BeansGapps SetupWizard should have no problems at all !
The required (stock) vendor.img is part of the ROM installer now !
You may have a try and do a "dirty" flash too -> do not wipe your data partition.
If you face any problems pls fo a factory reset via TWRP first.
DOWNLOAD:
NEW: https://drive.google.com/drive/folders/0By6p5AdQfavBUTZmNWJoaU1iazg
OLD: https://onedrive.live.com/redir?res...17&authkey=!ACPxBsf1QD-Fr0M&ithint=folder,zip
Enjoy

Guys, it seems that the manually Magisk root installation is recommended. SuperSu give some conflicts and settings force closes. Many thank to @followmsi for his hard work supporting our lovely device with this beast of rom
Btw - if you get in trouble with SuperSU get MagiskManager root privileges and let it download Magisk-v12.0.zip. Reboot your device in TWRP and install Rom / (Kernel) / /MagiskManager/Magisk-v12.0.zip again. Thats´s all Have Fun

redukt said:
Guys, it seems that the manually Magisk root installation is recommended. SuperSu give some conflicts and settings force closes. Many thank to @followmsi for his hard work supporting our lovely device with this beast of rom
Btw - if you get in trouble with SuperSU get MagiskManager root privileges and let it download Magisk-v12.0.zip. Reboot your device in TWRP and install Rom / (Kernel) / /MagiskManager/Magisk-v12.0.zip again. Thats´s all Have Fun
Click to expand...
Click to collapse
Did you install fresh boot.img before you installed Magisk ?
If you want to install both - magisk and supersu - you need to follow the instructions here:
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
If you're not rooted, or something went wrong and you need a clean start
(Recommended) Restore your boot image back to stock (flash uninstaller if Magisk is previously installed)
Download the latest Magisk zip file
Reboot to a custom recovery
If you choose to use SuperSU (only support Android 6.0+), flash SuperSU in systemless mode now
Flash Magisk zip
Reboot. Update the stub Magisk Manager to the latest from Play Store
I don't have any problems ...
Installed Magisk only - works fine.
Installed SuperSU and Magisk - works fine. (SuperSU is the root tool then - Magisk Manger is used for modules only)
Magisk is quite nice - it does not need to double-boot after installation.
And it's open source too
If you install SuperSU and Magisk it still needs to double-boot because of SuperSu.
Maybe we should switch to Magisk in general .. for all ROMs
I did test this on LineageOS OMS CM14.1 now.
Will test again on RR version .. but it should be the same - the integrated Magisk Manager should not be related.
Cheers

Made a screen shot with LOS OMS version ..

Made same test on latest RR version now ... no problems at all.
Installed Magisk only - working fine.
Installed Magisk and SuperSU .. all is fine.
Same like in LOS OMS version .. root tool is SuperSU.
Magisk Manager has been granted access inside SuperSU tool.
Pls check your install procedure again ..
Removal of SuperSU or Magisk is done by just applying the fresh boot.img.
Magisk only install:
1. fresh boot.img (taken from zipped ROM package)
2. Install Magisk only-
3. Reboot system - no double-boot
or
Magisk and SuperSU install:
1. fresh boot.img (taken from zipped ROM package)
2. Install SuperSU first !!!
3. Install Magisk
4. Reboot system - still have the double-boot
SuperSu only installation has been already validated on last RR version.
I am really starting to like Magisk ... no double-boot anymore and full opensource

Here the same screen shot but inside RR ..
My conclusion .. no issues at all with magisk !
Seems to fully working with chromeos signed boot.img
Works with and without Supersu.
Does not need double-boot .. and is opensource.
Hmmmm .... I think I will switch
But the ROMs will be not changed !
If somebody wants to install SuperSU you don't need install a fresh boot.img before.
After ROM installation you decide what you want .. both tools or just one tool.
Topic magisk is closed now

followmsi said:
Here the same screen shot but inside RR ..
My conclusion .. no issues at all with magisk !
Seems to fully working with chromeos signed boot.img
Works with and without Supersu.
Does not need double-boot .. and is opensource.
Hmmmm .... I think I will switch
But the ROMs will be not changed !
If somebody wants to install SuperSU you don't need install a fresh boot.img before.
After ROM installation you decide what you want .. both tools or just one tool.
Topic magisk is closed now
Click to expand...
Click to collapse
Those screenshots have nicely answered a question for me if the Roms are laid out like stock nav bars or not lol

Made the same package for flo/deb and manta devices .
And now for dragon device too ..
It seems there are still issues with the opengapps SetupWizard on 7.1.2 ROMs.
The SetupWizard (only) package below seems to work fine - except for the "vision settings".
BeansGapps_SetupWizard_7.1.2_Dragon.zip
Installation:
1. As we want to see the SetupWizard we do a clean install .. wipe system, cache, dalvik, data .. everything except internal storage.
2. install the 7.1.2 ROM of your choice.
3. Install official opengapps package you like ..
4. install BeansGapps_SetupWizard_7.1.2_Manta.zip
5. Install Magisk and/or SuperSu.
6. Reboot into system and wait for the SetupWizard.
Cheers

followmsi said:
Made the same package for flo/deb and manta devices .
And now for dragon device too ..
It seems there are still issues with the opengapps SetupWizard on 7.1.2 ROMs.
The SetupWizard (only) package below seems to work fine - except for the "vision settings".
BeansGapps_SetupWizard_7.1.2_Dragon.zip
Installation:
1. As we want to see the SetupWizard we do a clean install .. wipe system, cache, dalvik, data .. everything except internal storage.
2. install the 7.1.2 ROM of your choice.
3. Install official opengapps package you like ..
4. install BeansGapps_SetupWizard_7.1.2_Manta.zip
5. Install Magisk and/or SuperSu.
6. Reboot into system and wait for the SetupWizard.
Cheers
Click to expand...
Click to collapse
Hello followmsi,
Thanks for port RR to our Pixel C I love RR and I use it on both of my OnePlus.
In my OP 3T with a 7.1.2 RR Rom I´m using BeansGAPPS Mini, so I should use the Beans package provided in your OneDrive folder?
Thanks in advance.

Istvan_86 said:
Hello followmsi,
Thanks for port RR to our Pixel C I love RR and I use it on both of my OnePlus.
In my OP 3T with a 7.1.2 RR Rom I´m using BeansGAPPS Mini, so I should use the Beans package provided in your OneDrive folder?
Thanks in advance.
Click to expand...
Click to collapse
If you read above .. it's just a replacement for the setupwizard.
If you install opengapps and the setupwizard is crashing reboot into TWRP again and install this package above - just to fix setupwizard only.
Of course you can install complete beans gapps too.
Cheers

followmsi said:
If you read above .. it's just a replacement for the setupwizard.
If you install opengapps and the setupwizard is crashing reboot into TWRP again and install this package above - just to fix setupwizard only.
Of course you can install complete beans gapps too.
Cheers
Click to expand...
Click to collapse
Ok, let´s give it a try and post results here.
Cheers!!

followmsi said:
If you read above .. it's just a replacement for the setupwizard.
If you install opengapps and the setupwizard is crashing reboot into TWRP again and install this package above - just to fix setupwizard only.
Of course you can install complete beans gapps too.
Cheers
Click to expand...
Click to collapse
Full wipe and ROM installed with latest Beans Gapps without any kind of problems. I love RR and it works like a charm for the moment. I was using the tablet for at least 4 hours I think with all my daily apps installed (arround 40 apps) Substratum and rooted with latest Magisk.
I have a question, the stock kernel can handle usb-otg? And what formats can handle, like NTFS, exFAT, etc? Sorry for dumb question but I forget all my USB at the office....
Really thanks for your work mate!!!

Istvan_86 said:
Full wipe and ROM installed with latest Beans Gapps without any kind of problems. I love RR and it works like a charm for the moment. I was using the tablet for at least 4 hours I think with all my daily apps installed (arround 40 apps) Substratum and rooted with latest Magisk.
I have a question, the stock kernel can handle usb-otg? And what formats can handle, like NTFS, exFAT, etc? Sorry for dumb question but I forget all my USB at the office....
Really thanks for your work mate!!!
Click to expand...
Click to collapse
The kernel supports NTFS and F2FS .. exFAT via fuse only.
Have a try to mount your drive via console.
Maybe tricky ..
To make it short ..
Pls use Paragon drivers or other tools for exFAT and NTFS.
Maybe use "stick mount" too.
These tools offer "real" Android integration .. that what you want !
Cheers
EDIT: Because of TWRP config, the ntfs-3g user space driver is also included in the RR ROM.
https://github.com/followmsi/androi...mmit/01918bd2e07ae491eaae9a37af4175d375c18c86
Type in terminal ..
mount.ntfs /dev/yourdevice
To mount via kernel driver you just type. ..
mount -t ntfs /dev/yourdevice
Have a try ..
But as said above .. to have it "comfortable" use proper Android tools

New version arrived ...
RR-N-v5.8.3-20170511-dragon-Unofficial-followmsi.zip
Changes:
- Latest RR changes
- Latest kernel changes
- Fix for "Wifi direct"
- Enabled Doze (Ambient light)
Enjoy ..

Due to several reasons I have removed the vendor.img from the ROM now !
I have changed the first page accordingly ...
The required (stock) vendor.img is not part of the ROM installer !
You will find a copy inside the download folder.
Installation:
1. Boot into TWRP
2. Wipe system, cache, dalvik and data. (Not required if you upgrade from previous build)
3. Install ROM ...
4. Install current stock vendor.img (flash via TWRP)
5. install opengapps or beansgapps (arm64) (optional)
6. install SuperSU.zip and/or Magisk.zip
7. Reboot into system ..
Thanks for your understanding ..

followmsi said:
Due to several reasons I have removed the vendor.img from the ROM now !
I have changed the first page accordingly ...
The required (stock) vendor.img is not part of the ROM installer !
You will find a copy inside the download folder.
Installation:
1. Boot into TWRP
2. Wipe system, cache, dalvik and data. (Not required if you upgrade from previous build)
3. Install ROM ...
4. Install current stock vendor.img (flash via TWRP)
5. install opengapps or beansgapps (arm64) (optional)
6. install SuperSU.zip and/or Magisk.zip
7. Reboot into system ..
Thanks for your understanding ..
Click to expand...
Click to collapse
Hello and thanks for updating the ROM,
So in order to flash the latest update after install the "vendor_N2G47O_2017-05.img" I must flash the "vendor_N2G47O_2017-05.img" right?
Cheers!!!

Istvan_86 said:
Hello and thanks for updating the ROM,
So in order to flash the latest update after install the "vendor_N2G47O_2017-05.img" I must flash the "vendor_N2G47O_2017-05.img" right?
Cheers!!!
Click to expand...
Click to collapse
No .. this is a copy of current stock vendor.img file.
And if you have current vendor.img now, you don't need to install again.
Sent from my AOSP on Manta using Tapatalk

[ROM][OFFICIAL] Lineage OS 16.0 for Pixel 2 / 2 XL

Changelog
31/08/20
Initial official release

Eamo5 said:
Reserved
Click to expand...
Click to collapse
Very nice, going to test this one.

Nice work. OK google detection works now.

August security patch coming soon!

Nice work

Eamo5 said:
August security patch coming soon!
Click to expand...
Click to collapse
Thank you very much. When do you plan to release the August version?

patroll said:
Thank you very much. When do you plan to release the August version?
Click to expand...
Click to collapse
Whenever it happens. Unless I misunderstood and this wasn't an ETA request...
Sent from my Pixel 2 XL using XDA Labs

pick gps high accuracy and battery mode....gps off...

After following instructions exactly phone keeps rebooting to recovery.

tjsdev said:
After following instructions exactly phone keeps rebooting to recovery.
Click to expand...
Click to collapse
Is your vendor July? If coming from stock or another rom -factory reset in TWRP
-flash rom + TWRP zip
-reboot recovery
-flash mindthegapps
-reboot system

Edmontonchef said:
Is your vendor July? If coming from stock or another rom -factory reset in TWRP
-flash rom + TWRP zip
-reboot recovery
-flash mindthegapps
-reboot system
Click to expand...
Click to collapse
should we factory reset or just need to wipe data, system and cache?

b4lenisme said:
should we factory reset or just need to wipe data, system and cache?
Click to expand...
Click to collapse
Don't wipe system, just factory reset is good enough.
If you wipe system you should flash the stock ota and twrp zip, boot up and start over.

How to install this rom? I'm on ressurection remix now..
Sorry for my silly question coz i'm nub..

Zulkasim said:
How to install this rom? I'm on ressurection remix now..
Sorry for my silly question coz i'm nub..
Click to expand...
Click to collapse
Factory reset
Flash rom + twrp zip
Reboot recovery
Flash mindthegapps
Reboot system
It's the same process for carbonrom and cosp

Edmontonchef said:
Factory reset
Flash rom + twrp zip
Reboot recovery
Flash mindthegapps
Reboot system
It's the same process for carbonrom and cosp
Click to expand...
Click to collapse
Thanks bro

i have problem with installing august version. After factory reset in twrp > flash LOS > flash twrp > reboot into recovery, no matter what i do the content inside sdcard cannot be detected. the folders` name become totally random and mess. anyone experiencing same thing?

balenisme said:
i have problem with installing august version. After factory reset in twrp > flash LOS > flash twrp > reboot into recovery, no matter what i do the content inside sdcard cannot be detected. the folders` name become totally random and mess. anyone experiencing same thing?
Click to expand...
Click to collapse
****ty, this happened to me before from flashing an old ROM by mistake.
Have you tried booting? Either way you'll have to format your data to decrypt the file system.
If it doesn't boot you'll have to adb side load stock ota and start over. A type c thumb drive loaded with files you need comes in handy when this happens.
I'll wait till I'm home before flashing this to see what's up.

Edmontonchef said:
****ty, this happened to me before from flashing an old ROM by mistake.
Have you tried booting? Either way you'll have to format your data to decrypt the file system.
If it doesn't boot you'll have to adb side load stock ota and start over. A type c thumb drive loaded with files you need comes in handy when this happens.
I'll wait till I'm home before flashing this to see what's up.
Click to expand...
Click to collapse
i have tried to boot it but it always end up in twrp, in wont boot to the rom. a alsho have tried using july image and older twrp, but those also fail.
@Eamo5 maybe you could take a look at this
---------- Post added at 10:46 PM ---------- Previous post was at 10:46 PM ----------
Edmontonchef said:
****ty, this happened to me before from flashing an old ROM by mistake.
Have you tried booting? Either way you'll have to format your data to decrypt the file system.
If it doesn't boot you'll have to adb side load stock ota and start over. A type c thumb drive loaded with files you need comes in handy when this happens.
I'll wait till I'm home before flashing this to see what's up.
Click to expand...
Click to collapse
i have tried to boot it but it always end up in twrp, in wont boot to the rom. a alsho have tried using july image and older twrp, but those also fail.
@Eamo5 maybe you could take a look at this

I can confirm something's wrong with the latest build.
Encrypted data after flashing @Eamo5

[ROM][10][ARM64] LineageOS 17.1 for the Galaxy J7 Pro - 2017 [J730][02.02.2021]

IMPORTANT, PLEASE READ THIS
This is a ROM built from source and not a GSI!
Fix Camera stretch & force close for some camera apps
You can do it editing /vendor/build.prop file using MiXplorer (you’ll need ROOT).
Search for the line “vendor.camera.hal1.packagelist”
After the = are the name of different apps. Delete one of these and put the package name of the app that you want to fix. For example, com.facebook.orca is the Facebook package name.
Per default, the ROM comes with Whatsapp, ZOOM, Snapchat and Instagram added. Maximum 4 Apps are allowed in this line and must be separated by comma ",".
If you don’t understand, open this link to see visual steps.
Fix Camera stuck
Sometimes, the camera can get inaccessible if an app has crashed. If it happen, follow this:
Install this app. Open it and tap "Kill camera", then give it ROOT permissions. Done! Camera is working again.
Take in mind that if the camera is broken and you didn't do this, the audio in calls maybe not work.
GCam
This ROM can run GCam. Download a modded version for Exynos HERE. Thanks to Leonardo Estacio for his mod.
Games: this ROM works so good for gaming and can run ARM64 apps/games. If you feel lags, go to Settings > Battery > Battery Saver and performance > Performance Profile and set it to High Performance.
For close, i want to give a huge thanks to @Astrako - Without him this ROM haven't be possible <3

Changelog
===== 02-02-2021 =====
- Initial build

Awesome

i will try. give feedback later.

It´s been some time since I installed a custom rom, I was going to install this one.
But when i want to install the "LOS17.1-Repartitioner-exynos7870.zip", the fox recovery says that It failed to mount vendor.
What could I do?

jaisaris6 said:
It´s been some time since I installed a custom rom, I was going to install this one.
But when i want to install the "LOS17.1-Repartitioner-exynos7870.zip", the fox recovery says that It failed to mount vendor.
What could I do?
Click to expand...
Click to collapse
After install the repartitioner, you need to go to the trash bin, then go to "format data" and type yes, then tap the tik in the below-right of the keyboard.
After this, go to wipe tab and select SYSTEM, CACHE, DALVIK, VENDOR, INTERNAL STORAGE and finally DATA. Then, swipe the bar.
Done, you can flash the ROM following the other steps!

awesome rom, no lag, thanks for this.

GonicTEAM said:
After install the repartitioner, you need to go to the trash bin, then go to "format data" and type yes, then tap the tik in the below-right of the keyboard.
After this, go to wipe tab and select SYSTEM, CACHE, DALVIK, VENDOR, INTERNAL STORAGE and finally DATA. Then, swipe the bar.
Done, you can flash the ROM following the other steps!
Click to expand...
Click to collapse
I can´t even install the repartitioner, so Do I have to wipe everything you´ve said first too?
I´m coming from the stock rom, by the way.

How to remove (x) in signal bar?
Please see SS. Thanks.

Hi all. Mostly everything i tested so far works OK. Even cameras (front and back).
but i do have problem with sim cards not being detected. In settings i cant see IMEI and on each "sim status" i see "not available".
i have tried restoring Modem and EFS backup, with no lock. Modem backup restores ok, EFS fails. After sim cards still aren't detected.
Any idea what i can do to fix this?
I'm testing this on SM-J730F/DS with or without gapps.
----
EDIT: i fixed it by flashing latest stock room bootlader and modem (BL and CP). Following this guide https://forum.xda-developers.com/t/root-j730x-8-x-and-9-x-and-upgrade-bootloader-and-modem.3883139/

hi sorry i cant understand how Fix Camera stretch & force close for some camera ??

Is there a program that can be installed from the recovery to solve the camera problem

Bugs
always work sensor call off screen
Camera stretch whatsapp....

mrz.uk said:
Bugs
always work sensor call off screen
Click to expand...
Click to collapse
Hahahahha men, that's because u are listen a Telegram audio and didnt stop it, it's not a bug!

Thanks testing your rom stable and excelent fast rom
Congratulations for your great work
Using your vendor roms android 11 run perfectly
My suggest create new tread Vendor 2.0 Gonic for J7
Thanks my friend

hacker812c said:
Thanks testing your rom stable and excelent fast rom
Congratulations for your great work
Using your vendor roms android 11 run perfectly
My suggest create new tread Vendor 2.0 Gonic for J7
Thanks my friend
Click to expand...
Click to collapse
built-in vendor is a/b or a-only?

ichbinahmet said:
built-in vendor is a/b or a-only?
Click to expand...
Click to collapse
Vendor AB present in Lineage
100% compatible with android 11

GonicTEAM said:
Hahahahha men, that's because u are listen a Telegram audio and didnt stop it, it's not a bug!
Click to expand...
Click to collapse
yes i restart phone fix but sternch camera i cant fix plz copy edit text

hacker812c said:
Vendor AB present in Lineage
100% compatible with android 11
Click to expand...
Click to collapse
Omg its really yes, ares kernel 8.0 works perfect with android 11 gsi with this vendor.
HavocOS 4.1
[email protected] - Browse /HavocOS-11 at SourceForge.net

[11][UNOFFICIAL] PixelExperience Plus, EAS Kernel [18-12-2021]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation).
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device.
Based on Android 11
What's working?
WiFi
RIL
Mobile Data
GPS
Camera
Flashlight
Bluetooth
FMRadio
Fingerprint Reader
NFC
Sound/Vibration
Known issues
Nothing...
You tell me
DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED
NOTE: I'm not a developer. You're free to report bugs (with attached logcats), but don't ask me to fix problems/add features, because i'm not able to.
INSTRUCTIONS
Clean flash (coming from other ROMS or stock one)
Wipe cache/Dalvik/Data (will delete everything inside, do a backup of your files if you need them!)
Format Data-->Reboot in TWRP
Flash ROM
Enjoy!
Dirty Flash
Wipe Cache/Dalvik
Flash ROM
Enjoy!
Downloads:
TWRP
maple (G8141):
https://dl.twrp.me/maple/
maple_dsds (G142):
https://dl.twrp.me/maple_dsds/
ROM Downloads in Post #2
Build author/Device maintainer: Tux111
Source code: https://github.com/whatawurst/android_device_sony_poplar
Source code: https://github.com/PixelExperience
Kernel: https://github.com/linckandrea/android_kernel_sony_msm8998-EAS/tree/R-EAS-pixel-r1 and https://github.com/derfelot/android_kernel_sony_msm8998/tree/lineage-18.1_update (currently, this one)
Rom Information
ROM OS Version: Android 11 R46
ROM Kernel: Linux 4.4
Security patch level: 5 December 2021
Version Information
Status: Stable
Stable Release Date: 2021-12-18
Contributors
derf elot, linckandrea, modpunk, Rooted_Ansh, javiwz
Special Thanks to @javiwz for guiding me to build the rom.

Download
18/12/2021
changelogs:
Android 11 update, release R46
Novembre+December Security patches
Tons of fixes i have no idea to, cause official blog never release info about fast
Tons of love
Merry Christmas
SINGLE SIM (G8141): https://mega.nz/file/08hkQSZK#EniXz1KUb_66a99j70P6wZQdDodkYF04Czw1L0GXu2s
DUAL SIM (G8142): https://mega.nz/file/pshAxaIS#JHEnHcY9tsnJIdD9j_wFOtCOm_X4RQiaIRfk9FQkexs
09/10/2021
changelogs:
October security patch
Updated translations
Others fixes
Upstream all relevant repos with LineageOS
Updated ROM Sources (tons of fixes)
Now the phone will explode with kaboom and boboom.
Probably others things i'm not aware of.
SINGLE SIM (G8141): https://mega.nz/file/d0YhQQKK#qqj863_JirZsHUpm1eQOxzzhXLBMXuUv_tMhSE6lCiI
DUAL SIM (G8142): https://mega.nz/file/coAUSL5b#5LBnXDOW1ausWP81dCBSFS7xIOYLPk9TdGSmjK07p3Q
20/09/2021
changelogs:
Android 11 update, release R43
Security Patch - 5 September 2021
Updated Kernel, with many fixes and additions
Updated translations
Fixed SafetyNet
Others-Misc. fixes
added some love
SINGLE SIM (G8141): https://mega.nz/file/ooICnDAI#bsKfciQCRg6x2ggR_2DhcmDZ9w3yMQsma1RbqdJKHNQ
DUAL SIM (G8142): https://mega.nz/file/UhZxAAJS#WvzCbjvsxv4CW68sK_K_jChtKBLmxYYUn6OHbiJqT-I

Reserved 2

You r the best clean flash and i ll try It. THX for your work

Thanks for your hard work. Installation works perfect , but when try ro reboot it freezes on Google Logo and not possible to do nothing. Could you please suggest how to resolve this issue?

Does dot OS not update?

ted5300 said:
Thanks for your hard work. Installation works perfect , but when try ro reboot it freezes on Google Logo and not possible to do nothing. Could you please suggest how to resolve this issue?
Click to expand...
Click to collapse
me too, same problem. but before the reboot, the rom is absolutelly amazing, i love it and i ll hope the problem of reboot will be solved.

Awesome rom! But I have the same problem mentioned, when reboot the device get stuck on "G" logo (I noticed that the led when I connect the phone to a charger work).

I installed this rom from dotOS follow the steps as below:
- Flash TWRP 3.5.2 from link this post.
- Boot to TWRP -> Wipe System, Data, Cache, Dalvik, Internal storage (i put ROM in SD card) -> Format Data -> Flash this ROM -> wipe cache -> Reboot -> Done.
Everything works fine, including the fingerprint sensor.
Then i go back dotOS follow the steps as above but fingerprint sensor don't work (disappear in menu setting). I try install stock laster ROM with newflasher but fingerprint sensor don't work.
Any fix? Thank u.
-------
Edit: wait about 12h for fingerprint sensor work again for me. I no understand: ROM can auto fix that.

The WIFI doesn't work ,no IP and MAC adress

ted5300 said:
Thanks for your hard work. Installation works perfect , but when try ro reboot it freezes on Google Logo and not possible to do nothing. Could you please suggest how to resolve this issue?
Click to expand...
Click to collapse
No idea. I remember time ago PE had a problem at the first boot, that automatically resolved waiting some minutes, but nothing else. Let's see whit next release, but i don't think its rom related, considering this problem isnt there on XZ1 (that is basically the same device). Maybe depend from the switch from dotos to pe.
boomanfc said:
I installed this rom from dotOS follow the steps as below:
- Flash TWRP 3.5.2 from link this post.
- Boot to TWRP -> Wipe System, Data, Cache, Dalvik, Internal storage (i put ROM in SD card) -> Format Data -> Flash this ROM -> wipe cache -> Reboot -> Done.
Everything works fine, including the fingerprint sensor.
Then i go back dotOS follow the steps as above but fingerprint sensor don't work (disappear in menu setting). I try install stock laster ROM with newflasher but fingerprint sensor don't work.
Any fix? Thank u.
-------
Edit: wait about 12h for fingerprint sensor work again for me. I no understand: ROM can auto fix that.
Click to expand...
Click to collapse
XZ1 and XZP are magical devices. If something doesnt work, 12h fixes it. 100% satisfaction or money back.
WHZHY said:
The WIFI doesn't work ,no IP and MAC adress
Click to expand...
Click to collapse
Impossible. Try with a clean flash.

Tux111 said:
No idea. I remember time ago PE had a problem at the first boot, that automatically resolved waiting some minutes, but nothing else. Let's see whit next release, but i don't think its rom related, considering this problem isnt there on XZ1 (that is basically the same device). Maybe depend from the switch from dotos to pe.
XZ1 and XZP are magical devices. If something doesnt work, 12h fixes it. 100% satisfaction or money back.
Impossible. Try with a clean flash.
Click to expand...
Click to collapse
For the reboot problem if I install pixel experience 10 and then this one, do you think that I can resolve the problem?

Solved the problem of stuck on "G" boot animation when reboot, I format data 2 times (format data then power off, boot to recovery and format data again then flash rom) and on first startup I didn't set a pin/pattern when boot the device.

Rekon.fs said:
Solved the problem of stuck on "G" boot animation when reboot, I format data 2 times (format data then power off, boot to recovery and format data again then flash rom) and on first startup I didn't set a pin/pattern when boot the device.
Click to expand...
Click to collapse
So the problem Is PIN?

Rxfireblade said:
So the problem Is PIN?
Click to expand...
Click to collapse
I'm not sure but in my case without the pin/pattern on boot I don't have any problem know.

Rekon.fs said:
I'm not sure but in my case without the pin/pattern on boot I don't have any problem know.
Click to expand...
Click to collapse
Hello, @Rekon.fs I installed this GT-I9195: https://www.mediafire.com/file/9gmf...8.1-20210912-UNOFFICIAL-serranoltexx.zip/file
It works fine But I have a problem with the Instagram app, I can't post a video And when I installed Android 10, I don't have a problem with the Instagram app Do you have a solution to this problem or a bug in Android 11 ??

Zack divoi said:
Hello, @Rekon.fs I installed this GT-I9195: https://www.mediafire.com/file/9gmf...8.1-20210912-UNOFFICIAL-serranoltexx.zip/file
It works fine But I have a problem with the Instagram app, I can't post a video And when I installed Android 10, I don't have a problem with the Instagram app Do you have a solution to this problem or a bug in Android 11 ??
Click to expand...
Click to collapse
I don't have that device and this is not the right place where to ask, all I can say is that Instagram is a ****ty app on Android.

boomanfc said:
I installed this rom from dotOS follow the steps as below:
- Flash TWRP 3.5.2 from link this post.
- Boot to TWRP -> Wipe System, Data, Cache, Dalvik, Internal storage (i put ROM in SD card) -> Format Data -> Flash this ROM -> wipe cache -> Reboot -> Done.
Everything works fine, including the fingerprint sensor.
Then i go back dotOS follow the steps as above but fingerprint sensor don't work (disappear in menu setting). I try install stock laster ROM with newflasher but fingerprint sensor don't work.
Any fix? Thank u.
-------
Edit: wait about 12h for fingerprint sensor work again for me. I no understand: ROM can auto fix that.
Click to expand...
Click to collapse
You must not wait. If you have root or twrp,go to data then system and delete locksettings.db. Reboot and fingerprint and pin works. Very old trick

Next79 said:
You must not wait. If you have root or twrp,go to data then system and delete locksettings.db. Reboot and fingerprint and pin works. Very old trick
Click to expand...
Click to collapse
You sure? About this bug, I seach google and go xda: flash to stock firmware CE... I tried & haven't lucky. Then i flash go back AOSP, wait & fingerprint work again. XZP is magical device.

Thanks for the works,
first time to flash a rom to my xzp. it works fine on my device.
several things need to be checked.
1. 4K support
2. HDR support on Youtube (screen seems to be triggered brighter, but resolution remains at 720p after several secs loading)

Develop Bugs

welcome