Related
Hi Guy,
I recently buy a Android TV Philips PUS7909. It's an android tv based with 4.2.2 on board, unfortunatly Philips make the choice to block LOTS of android function...
I can't install unallowed apps, enabling dev mod....
I just want to know if someone here have this tv, or another philips android tv, and if someone can root it etc etc
Yes i know, it's not even christmas , but maybe someone can do amazing thing on android tv, specially on xda !
Hi,
I've a 48PFS8159 and could not find a way too.
My dream is the possibilty to install kodi/xbmc !
And something like Retroarch with the possibility to connect a dualshock
I too have a PUS7909/12 Android TV and I was disappointed by several things, one of them being unable to install most of Store apps. Rooting would be great as at least it would allow to install .apk files.
New update for this tv soon :
The new Firmware will soon be live.
AND1E_0.9.32.118 (Date published: 2014-11-21)
• HDMI EDID adaptions for Full HD <-> Ultra HD interoperability ( DISCONNECT HDMI cables before starting the upgrade)
• 3D fixes
Maybe we can do something with the update files.....
Should Philips provide the source code of its Android implementation? Are they under the obligation to provide it?
Matt17000 said:
Hi Guy,
I recently buy a Android TV Philips PUS7909. It's an android tv based with 4.2.2 on board, unfortunatly Philips make the choice to block LOTS of android function...
I can't install unallowed apps, enabling dev mod....
I just want to know if someone here have this tv, or another philips android tv, and if someone can root it etc etc
Yes i know, it's not even christmas , but maybe someone can do amazing thing on android tv, specially on xda !
Click to expand...
Click to collapse
Hi,
I read one comment from Finnish netshop, it's for 55pus8809 model:
1. Install "Developer Tools" from play shop
2. Choose "Developer settings"
3. Switch developer options "on"
4. And "Show more apps in Google Play"
5. Reboot TV
Install "Set orientation" from play to orientation problems, switch "Landscapen" on.
I don't have Philips TV, but planning to buy one
Here is link to source, I don't know how it works...
verkkokauppa.com/fi/product/16035/dxskv/Philips-55PUS8809-55-Smart-Android-4K-Ultra-HD-3D-LED-televi#BVRRWidgetID
Lähetetty minun Nexus 5 laitteesta Tapatalkilla
I tried this, and it's true that some more apps are shown. Would be great to load apk files, but there is no "unknown sources" option...
I have the Philips 48PFS8109.
Developer options are enabled, but there is just no way to enable 'unknown sources'.
With the Google Search function the Settings options is not showing (it works on phones if you search settings)
Not a single application is compatible that gives me a shortcut to settings.
If i try to install an .apk file i get the message you need to go to settings and allow it. There is an Settings and Cancel, but if i press on settings nothing happens.
Does someone know a way to call up the settings menu with Therminal Emulator?
I already updated the tv but do you guys think its possible to just add an .apk file in the .upg file?
I can change the .upg to .zip and add an app in the system folder.
Steps for install any APK in 2014 Philips Android TV AND1E
Hello,
For install any application in 2014 Philips Android TV AND1E :
1º You must download "Developer Settings" from "Google Play" and enable "Usb Debugging" in "Developer options".
2º Connect ADB via WIFI -> adb start-server" , adb connect IP:5555
3º Install APK -> adb install "app.apk" (download apk from google play with evozzi apk downloader in web or in chrome extension)
I've tried it in 55PUS8909 and it works!.
I've tried for root framaroot, towelroot and vroot and exploits not run.
I've tried all for "Unknown Sources" and nothing.
sorry for my english....thanks, regards!
Updated -- Enable "Unknown Sources" in Philips Android TV
Hi, to enable Unknown Sources:
Download "QuickShortCutMaker" from Google Play with "evozi apk downloader".
Install application via ADB WIFI (previous post).
Search Activities - Settings - Security
Press with Remote Pointer in Security and press in "Try" and this launch security activity to enable option.
Regards
I'm eager to try that! I have the TV disconnected right now, but that's something to try. Thanks for sharing that info
christian_cvi said:
Hello,
For install any application in 2014 Philips Android TV AND1E :
1º You must download "Developer Settings" from "Google Play" and enable "Usb Debugging" in "Developer options".
2º Connect ADB via WIFI -> adb start-server" , adb connect IP:5555
3º Install APK -> adb install "app.apk" (download apk from google play with evozzi apk downloader in web or in chrome extension)
I've tried it in 55PUS8909 and it works!.
I've tried for root framaroot, towelroot and vroot and exploits not run.
I've tried all for "Unknown Sources" and nothing.
Click to expand...
Click to collapse
Thanks for sharing! Working like a charm! :good:
Tested on Philips 49PUS7909/12
christian_cvi said:
Hi, to enable Unknown Sources:
Download "QuickShortCutMaker" from Google Play with "evozi apk downloader".
Install application via ADB WIFI (previous post).
Search Activities - Settings - Security
Press with Remote Pointer in Security and press in "Try" and this launch security activity to enable option.
Regards
Click to expand...
Click to collapse
This also works! Thanks so much
Tested on 49PUS7909/12
Hi,
that sounds good
I had a look into the updater-binary (firmware/manual/ambilight-fix update zip file) and the firmware is, as we already know, encrypted.
When you have a look with IDA Demo (hex-rays.com) you can see that the encryption key is taken from: "/res/keyfile.txt" which must remain somewhere on the TV.
AES-256-CBC is used and the key/IV is somehow, depends on the content of the keyfile.txt, MD5 sum of the content lines (e.g. one for key, one for IV).
O M F G
I was on vacation for two weeks and i don't check this topic and what the hell is going on !
What a surprise for me to see what you do here !
Thanks a lot guys !
-----EDIT-------
The method to allow unknow source and install apk via adb working, thank you !
Tryed to install xbmc/ kodi but the launch and just crash, so bad. But that sound good !
-----EDIT 2------
There is a bluetooth option..... i can't connect my dualshock 3 on the tv because we need root for sixaxis controller app..... let's go to install some emulator !
------EDIT 3------
So... After some test, i was able to connect the duaslhock 3 controller in usb, BUT not all touch is recognised. So i can't play Mario Bros on Retroarch. I think i need another controller.
Kodi v14 lastest nightly boot but crash at home screen.
That's all for the moment !
Someone tray to use this oscam on TV?
http://forum.xda-developers.com/showthread.php?t=1547518
Is root needed? Have anyone idea how to root this TVs? I have 55PFS8109/12
Tested some apps.
AngryBirds - not working
World Of Tanks Blitz - works OK
QuickPic - works OK
Antutu score 22200 but all graphic test is in resolution 1280x720
Towellroot and framaroot like mentioned above want work. and root is most important ...
More investigations:
recovery mode on TV have only 2 options:
- restart system
- update system from sdcard
From:
- adb reboot download
- adb reboot recovery
is possible to do this steps?
->adb push busybox /data/local/tmp
->adb push su /data/local/tmp
->adb push Superuser.apk /data/local/tmp
adb shell
->chmod 755 /data/local/tmp/su
->chmod 755 /data/local/tmp/busybox
->chmod 644 /data/local/tmp/Superuser.apk
and copy above files to:
/system/bin
/system/app
???????
Just installed Twitch and it's working great. But it's only stremead in full hd, so it's not very good on the screen, but it's work !
Someone have try to install a video player that can handle 4K files ?
I have the '48PFS8109/12' and tryed also some things.
- 13.2 Gotham XBMC (kodi) not working, my tv starts the app and after a few seconds the app crashs and the tv volume goes to 60.
- Kodi 14.0 “Helix” – RC 2 not working, my tv starts the app and after a few seconds the app crashs and the tv volume goes to 60.
- Kodi 14.0 “Helix” – Nightly not working, my tv starts the app and after a few seconds the app crashs and the tv volume goes to 60.
I use 'MX Player' with the DTS codec, i don't know if that player can handle 4K, i know that they say KODI can do 4K.
The app should now work on most Marshmallow devices. Please report any issues with your device name and android version?
New tab for browsing fire TV/ Stick SDcard to pull/delete files.
Now you can play any http video on FireTV/Stick by selecting AGK fire as option..(Need MX Player installed on the Fire TV/Stick)
Auto Find FireTV/Stick. You still can add custom IP address.
Two new tabs. Has an Expert mode/Basic mode. Can be changed from settings.
You can Lunch/Uninstall apps on FireTV/Stick in expert mode.
I need to updated the help file. Please give me some time, I will update it.
New version added with ability to push files/folders to FireTV/Stick. Let me know what works and what doesn't.
Finally got it back on Google Play as paid version
https://play.google.com/store/apps/details?id=com.googletv.sideloader
Added a new version. In this new version You can export apps for sharing.
Now a Paid ad free version(if you want to support) @
http://www.amazon.com/Gopi-Adusumil...=UTF8&qid=1420754153&sr=1-2&keywords=agk+fire
Just added an ads support version. No new features. Just still working on few issues. Don't download this, if you hate ads. If you want to support me, please download this. I will try to post new version with with multi IP support and Auto IP discovery soon.
The App is now avilable on Amazon app store too.
http://www.amazon.com/Gopi-Adusumil...d=1418414099&sr=1-1-catcorr&keywords=agk+fire
Anyone having issues on moto phones, Can you please, try the attached moto version.
I have created this little android app for my own use. The main purpose of this app is to install any app that is on you android phone/tablet to FireTV/stick. All you need is the adb turned on your FireTV/Stick and Allow installing apps from unknown sources.
Here are steps copied from Amazon
Turn on ADB Debugging
You must enable ADB on the Fire TV device before you can connect to the device.
From the main (Launcher) screen, select Settings.
Select System > Developer Options.
Select ADB Debugging.
Get the IP Address
You need the IP address of your Fire TV device on your network to connect ADB to it.
From the main (Launcher) screen, select Settings.
Select System > About > Network. Make note of the IP address listed on this screen.
Now Just open the AGK fire app attached below, enter you FireTV/Stick IP Address and select the app you want to install on your FireTV/Stick.
Credits goes to alexjlockwood for "https://github.com/alexjlockwood/AppListLoader" which is the backbone for my app.
Also Thanks to all the wonderful tutorials on android app development on the web.
Any Suggestions are welcome. I will try to address as soon as I can.
I don't know how many people tried this app and felt it to be useful, but I am posting a new Version of this app. One small request if you use the app, please post a comment , any comment greatly appreciated.
Changes in version 1.1:
Added new menu option when you can select an apk file to install to your firetv. (Thanks to jfmdev for https://code.google.com/p/afiledialog/wiki/UserGuide)
Changes in version 1.2:
Aimed at using the app on FireTV/Stick (Thanks to AFTVNews.com for valuable suggestions and promoting my app)
Added an option to lunch apps or install when you select an app.
Still troubleshooting the problems some users are reporting. Will fix them ASAP.
Changes in version 1.3:
Made changes to adb install as per AFTVNews.com suggestion.(Hoping it will fix all the problems that some users are having. Please let me know it is still not working).
Changes in version 1.4:
Ability to push files/folders to Fire TV/Stick
Ability see all apk files
Export/Share apks.
Changes in version 1.5.11
Auto Find FireTV/Stick. You still can add custom IP address.
Two new tabs. Has a expert mode/basic mode. Can be selected from settings.
You Can lunch/Uninstall apps on FireTV/Stick in expert mode.
Changes in version 1.5.12
New tab for browsing Fire TV/ Stick SDcard to pull/delete files.
Now you can play any http video on FireTV/Stick by selecting AGK fire as option.(Need MX Player installed on the Fire TV/Stick)
Changes in version 1.5.15
The app should now work on Marshmallow devices
Tried it and its awesome!!!
Imagination is your limit.I have installed Chrome Beta, Xfinity TV (which covers lot of subscribed live channels like ESPN, ESPN2, CNN ( YOU NEED TO HAVE SUBSCRIPTION) etc), TWMC (XBMC for Android) and all of them works well. Great Job!!!!
Thanks for this. I will try this when I get home.
Android TV
Will this work for Android TV devices as well?
andyosier said:
Will this work for Android TV devices as well?
Click to expand...
Click to collapse
It should work. I haven't tested any. I have fire stick only. Any device that has adb over network turned on should work.
I'll try it tonight and let you know. I have an ADT-1 Developer Kit.
I think ADT-1 uses port 4321 so when you set your ipaddress add :4321 to the end of it. Thanks for testing.
Looks great. Super simple. Saves a bunch of time, thank you
Can't get it working
I have enabled adb and install of unknown apps, but no apps are installing to My Fire TV. When I select an app to install, I see a window pop up very briefly that says "Installing app", but then nothing.
It's awesome
adusumilli said:
I have created this little android app for my own use. The main purpose of this app is to install any app that is on you android phone/tablet to FireTV/stick. All you need is the adb turned on your FireTV/Stick and Allow installing apps from unknown sources.
Here are steps copied from Amazon
Turn on ADB Debugging
You must enable ADB on the Fire TV device before you can connect to the device.
From the main (Launcher) screen, select Settings.
Select System > Developer Options.
Select ADB Debugging.
Get the IP Address
You need the IP address of your Fire TV device on your network to connect ADB to it.
From the main (Launcher) screen, select Settings.
Select System > About > Network. Make note of the IP address listed on this screen.
Now Just open the AGK fire app attached below, enter you FireTV/Stick IP Address and select the app you want to install on your FireTV/Stick.
Credits goes to alexjlockwood for "https://github.com/alexjlockwood/AppListLoader" which is the backbone for my app.
Also Thanks to all the wonderful tutorials on android app development on the web.
Any Suggestions are welcome. I will try to address as soon as I can.
I don't know how many people tried this app and felt it to be useful, but I am posting a new Version of this app. One small request if you use the app, please post a comment , any comment greatly appreciated.
Changes since last version:
Added new menu option when you can select an apk file to install to your firetv. (Thanks to jfmdev for https://code.google.com/p/afiledialog/wiki/UserGuide)
Click to expand...
Click to collapse
It's awesome. It works fine.
geezman said:
I have enabled adb and install of unknown apps, but no apps are installing to My Fire TV. When I select an app to install, I see a window pop up very briefly that says "Installing app", but then nothing.
Click to expand...
Click to collapse
I get exactly the same behavior. Doesn't work.
This didn't work for me on my moto x 2014 but worked great on my galaxy tab 4 10.1 thanks
ddubz said:
This didn't work for me on my moto x 2014 but worked great on my galaxy tab 4 10.1 thanks
Click to expand...
Click to collapse
Hmm, doesn't work on my 2013 Moto X also. :crying:
Amazing app! Thank you!
Sent from my HTC6525LVW using XDA Free mobile app
Thank you! This worked flawlessly (version 1.1) on FireStick. Much faster than upload/download from Dropbox.
I haven't tried the direct apk, only apps installed on my phone (oneplus one).
edit: Had a moment where it would toast "installing", but then fade and do nothing. Killed app and restarted FireStick, and worked again. Not sure which of those two actions fixed it.
I have a few suggestions:
1. Go into your XDA settings and enable the donation button. You deserve compensation for your efforts. This is a great app.
2. When the app executes any adb command, like "adb install ....", you should target the IP address specifically. Some Android devices, including the Fire TV, will already be connected to an emulated adb device if developer mode is turned on. So when the app connects to the Fire TV, your adb commands will fail because there are two connected devices. I think this is the source of many peoples issues. You can direct adb commands like this:
Code:
adb -s <ipaddress:5555> ...
Note that the port number is required for this to work.
3. The app can be used on a Fire TV to install Fire TV only apps onto a Fire TV Stick. However, navigating with the remote is a bit broken. When the app list initially loads, make it so that the first item is selected/highlighted by default. This will allow the Fire TV remote to move the selection down the list. I found a workaround that allows this to work for now. If you press the menu button on the Fire TV remote and go to the apps settings, when you return to the app list, the selector will be present.
AFTVnews.com said:
I have a few suggestions:
1. Go into your XDA settings and enable the donation button. You deserve compensation for your efforts. This is a great app.
2. When the app executes any adb command, like "adb install ....", you should target the IP address specifically. Some Android devices, including the Fire TV, will already be connected to an emulated adb device if developer mode is turned on. So when the app connects to the Fire TV, your adb commands will fail because there are two connected devices. I think this is the source of many peoples issues. You can direct adb commands like this:
Code:
adb -s <ipaddress:5555> ...
Note that the port number is required for this to work.
3. The app can be used on a Fire TV to install Fire TV only apps onto a Fire TV Stick. However, navigating with the remote is a bit broken. When the app list initially loads, make it so that the first item is selected/highlighted by default. This will allow the Fire TV remote to move the selection down the list. I found a workaround that allows this to work for now. If you press the menu button on the Fire TV remote and go to the apps settings, when you return to the app list, the selector will be present.
Click to expand...
Click to collapse
Thanks for the help. I will try to add all the suggestions in the next release.
ddubz said:
This didn't work for me on my moto x 2014 but worked great on my galaxy tab 4 10.1 thanks
Click to expand...
Click to collapse
Can you please check if you can start adb on your phone from terminal app. It would be a great help.
Really need to support upcoming developers... Donated... You can buy a pack of beer.
adusumilli said:
I think ADT-1 uses port 4321 so when you set your ipaddress add :4321 to the end of it. Thanks for testing.
Click to expand...
Click to collapse
Aha! I will try that. I had no idea about the port.
BTW, your app looks much nicer than the Fireinstaller app that is available on Google Play. Maybe you should make it available there. Make it work for both Fire TV and Android TV. Call it "Sidestaller TV".
---------- Post added at 10:24 AM ---------- Previous post was at 10:13 AM ----------
Dude! Your app has been posted on AFTVnews!
aftvnews.com/agk-fire-app-lets-you-transfer-apps-from-an-android-device-to-an-amazon-fire-tv-or-fire-tv-stick
(Cut an paste the URL, I don't have enough posts to post links outside XDA, apparently.)
Hi,
I have a very strange issue and I am hoping that someone has a solution to this problem.
The tablet SM-T705 came with Build number KOT49H.T705XXU1ANG2 out of the box and it is not upgradeable.
Recently I bought a samsung galaxy tab s t705, The first thing that I wanted to do is root my new toy.
Obviously the first step in the process is to enable USB Debugging but it is a no go !
Here is what I am doing:
Settings > General > About device , Then tap the Build number 7 times.
Once I got the message that the developer mode is now enabled, I go back to the General tab but the "Developer options" are nowhere to be found.
I installed Nova launcher and tried to crate a shortcut for for the "Developer options" but all it does is throw me to the General settings tab in the settings.
I tried to factory reset the device and repeat the process but not luck.
I even tried some apps that are just shortcuts for the Developer options but it didn't help.
Any suggestions ?
I really need root (cant stand all the bloatware).
Thank you for your help !
/
16k
16k said:
Hi,
I have a very strange issue and I am hoping that someone has a solution to this problem.
The tablet SM-T705 came with Build number KOT49H.T705XXU1ANG2 out of the box and it is not upgradeable.
Recently I bought a samsung galaxy tab s t705, The first thing that I wanted to do is root my new toy.
Obviously the first step in the process is to enable USB Debugging but it is a no go !
Here is what I am doing:
Settings > General > About device , Then tap the Build number 7 times.
Once I got the message that the developer mode is now enabled, I go back to the General tab but the "Developer options" are nowhere to be found.
I installed Nova launcher and tried to crate a shortcut for for the "Developer options" but all it does is throw me to the General settings tab in the settings.
I tried to factory reset the device and repeat the process but not luck.
I even tried some apps that are just shortcuts for the Developer options but it didn't help.
Any suggestions ?
I really need root (cant stand all the bloatware).
Thank you for your help !
/
16k
Click to expand...
Click to collapse
Your on an old firmware, so that means you'll need to upgrade. Download mode does not need usb debugging. Simply put your device in download mode, flash newer firmware with odin, then root with cfautoroot. USB debugging is only needed to connect to PC while device is on. Hope this helps!
Thank!
DUHAsianSKILLZ said:
Your on an old firmware, so that means you'll need to upgrade. Download mode does not need usb debugging. Simply put your device in download mode, flash newer firmware with odin, then root with cfautoroot. USB debugging is only needed to connect to PC while device is on. Hope this helps!
Click to expand...
Click to collapse
This is the latest version based on Samsung's website and I really need to get usb debug going (not only for root).
Thanks for the help.
Which region is the device?
Recently some users including me are having issues with BT Connection, device search, setting device name and making changes persistent.
BT MODULES THAT IT WAS TEST ON:
SD-968 - [HA] [MCU MTCE 2.75] Firmware 20180201 and few earlier = WORKS
MD725 - [??] [MCU ???] Oreo Firmware = DO NOT WORK (According to feedback) LogCat needed to see if Firmware communicate with BT Module at all.
METHOD 1 (SHORTER):
1. Force Stop BT app
2. Clear DATA and CACHE for BT app
METHOD 2 (LONGER):
Here are the steps I've done to make it work.
1. Boot device (restart if it was not in deep sleep)
2. Directly go to system BT settings (drop notification and tap on BT)
3. Set Device name and PIN
4. Press refresh
5. Go to Home Screen (Home Button)
6. Open BT App -> Configuration
7. Name and PIN should be entered now
8. Disable/enable Auto Connect and exit app
9. reenter app and configuration to enable Auto connect
10. Make sure that all previous BT profiles for HU are deleted on phone and that phone is visible for all devices (usually when BT configuration is open device is visible)
11. Try to search for devices. It should fail (it failed for me)
12. Go to factory settings
13. Change BT Device even it is wrong one (I have SD-968 I changed to MD725)
14. Tap Apply -> Exit -> CANCEL on reboot prompt (without doing step 13 there will be no scheduled restart)
15. Reenter Factory settings and set correct BT Module (I have SET SD-968) Tap Apply -> Exit -> and Confirm REBOOT
16. After Reboot Go to BT App and try to search for phone it should be found (make sure it is visible like in step 10)
17. If all is OK you should see the phone and you should be able to use it normally (it worked for me)
Attached pictures of some steps for METHOD 2.
NOTE: I'm ATM at HA 6.0.1 Firmware from 20180201 and issue happened after upgrade. Also from what I see Users have same issue with and after Oreo update. Hope I helped
Thanks for the info. Have you tried this method also for oreo rom as well ?
A step that worked for me was to clear data and cache for bluetooth app..
julien_blanche said:
Thanks for the info. Have you tried this method also for oreo rom as well ?
Click to expand...
Click to collapse
Haven't updated to Oreo yet.
Phycopat said:
A step that worked for me was to clear data and cache for bluetooth app..
Click to expand...
Click to collapse
Good point it didn't worked for me but, it can also help. Added to main post.
You can trigger a reboot with "hctreboot" in factory settings. Does that work instead of doing steps 12-15?
I definitely have the BT issue. I have an Xtrons(GS) MTCD/E PX5 Oreo and an Xtrons brand OBDII. They won't talk or disconnect. I'll try this tomorrow morn and report back.
jdisco1 said:
You can trigger a reboot with "hctreboot" in factory settings. Does that work instead of doing steps 12-15?
I definitely have the BT issue. I have an Xtrons(GS) MTCD/E PX5 Oreo and an Xtrons brand OBDII. They won't talk or disconnect. I'll try this tomorrow morn and report back.
Click to expand...
Click to collapse
I have same GS MTCE 2.75 PX5 OREO but an old OBD2, give HU same password as OBD2 adapter..
jdisco1 said:
You can trigger a reboot with "hctreboot" in factory settings. Does that work instead of doing steps 12-15?
Click to expand...
Click to collapse
Point of 12-15 is that HU re init Module itself along with software. Not sure if it works that way on MTCD/E but usually it works on modular systems.
Tried with PX5 oreo installed with no luck. Both methods are not working for me.
PekeMM said:
Haven't updated to Oreo yet.
Click to expand...
Click to collapse
What???(I thought that this was a trick for oreo)
In my unit BT(MD725) works without any tricks for MM.
I tried your trick with 2 kinds of oreoROM(HA and GS) but BT did not work.
Thanks anyway
I'm sorry, but as I wrote I have SD-968 BT module not MD725. I'll update main thread with so far know to work devices.
Any news?
JonatanP said:
Any news?
Click to expand...
Click to collapse
Not that I know, I'll be back from Trip on Sunday, so I hope I'll finally finish the tests and upgrade to Oreo in April.
seems to be the same
The solution is to go back to android 6, the problem is that it is not as fluid in my case as android 8.
Hi, same problem here....
I can not use my ODB2 connector on my Android 8 radio either.
Is there an adapter that works?
Is there a trick to make it work?
Greetings and thank you!!
Hi..any update on how to get the bluetooth working on android 8..
Mtcd ksp px5
warata said:
What???(I thought that this was a trick for oreo)
In my unit BT(MD725) works without any tricks for MM.
I tried your trick with 2 kinds of oreoROM(HA and GS) but BT did not work.
Thanks anyway
Click to expand...
Click to collapse
if you still have android 8 installed, try going to factory setting and change the BT Device even it is wrong one (anything other then MD725) tap apply and exit and reboot.
after reboot change the BT device back to the original one (MD725) tap apply and exit and reboot.
after reboot go to the system BT and try to search if the phone name appears let me know.
i still didn't try the above method on android 8, but if anyone with MD725 module is still using android 8 please try and update us.
thanks
i was having problem with bt too...
here you can read my post https://forum.xda-developers.com/showpost.php?p=77525417&postcount=791
now i have Oreo Rom in a px5 board (32+4) with MD725 BT module working well
macoloco said:
i was having problem with bt too...
here you can read my post https://forum.xda-developers.com/showpost.php?p=77525417&postcount=791
now i have Oreo Rom in a px5 board (32+4) with MD725 BT module working well
Click to expand...
Click to collapse
Thanks, you said in that thread ".i have found a directory where all manufactures update.zip where listed
Go there , pickup last LM version" could you say where this directory is? Once there what do you do with that file?
bjt2 said:
Thanks, you said in that thread ".i have found a directory where all manufactures update.zip where listed
Go there , pickup last LM version" could you say where this directory is? Once there what do you do with that file?
Click to expand...
Click to collapse
i wrote all my procedure here
https://forum.xda-developers.com/showpost.php?p=77525417&postcount=791
and here
https://forum.xda-developers.com/showpost.php?p=77538182&postcount=796
Dasaita MMCNP - BT connection problem
Hi, I have Dasaita HA2106-V840-8 a problem with Bluetooth connectivity. First time I managed to connect my phone to Dasaita MMCP (car_kit), but after a few days the devices failed to connect. I guess my device has embedded SD968 BT chip, in accordance with the description.
When I enter the name of the device and new PIN in BT settings, and then turn on finding the device, they are not visible to each other. I tried this other day too, but when I turned MMCP, entered settings was gone (not memorized). No name, no PIN, but also there is no connection. Search doesn't have results. At the end I tried to unpair devices and pair them again, but I get a message on my phone "Unable to communicate with CAR_KIT".
When I entered in settings for BT (settings/car/factory setting/application-choose...) it was set to WQ_BC6. And then I tried to set up SD_BC6, reboot, search BT, nothing was found again. Then I returned to WQ_BC6, reboot, search BT, without success. In the end, I tried to set up SD968, but it's not worth it anyway, MMCP does not see a mobile phone. I also tried several phone models without success. I also went to the BT application and clear data and cache, but always the same thing - BT devices do not see each other. I'm not even sure BT is ON because it doesn't have a special slider to move On/Off.
What should I do? Please help me!
Hi,
Trying run Andorid Auto(5.4.502264-release from gPlay) on Skoda Octavia but no success. Of course I was try run with different device (Lenovo Tab) and it works.
Is it working with:
Note10+ Exynos
Baseband version N975FXXU4CTE9
Steps for reproduce:
Connect over USB
Allow permissions on Phone
Choose Android Auto on car infotainment screen
connecting
Connection lost
on Note10+ I can see Android Auto running in
What I was try
- change usb cable (3 different types)
- in Andorid Auto app on Phone setting I was try delete connected phone
- delete Phone in car infotainment
Any Idea how to solve it? Do you have similar experience?
Thank you
Update:
after testing S10 in the same car and it works again, I was made factory reset of Note10 and it works too.