Develop Bugs

LG G3 not recognized under Device Manager Ports.

Hello, I was trying to go back to stock Kitkat by using the LG flash tool. I ran into a problem where my phone went into Factory Reset Status 2. I'm now trying to follow this guide to completing this. http://forum.xda-developers.com/lg-g3/general/problem-returning-to-stock-try-t2862463
The problem I face now it that my computer won't list the phone under ports. I have downloaded the drivers. (Even re installed a few times) The phone gets listed under "Portable Devices" as LGE Android MTP Device. I need to be able to connect it to COM41 to fix this issue but I'm not sure what to do here. Any help is appreciated.

dipalp95 said:
Hello, I was trying to go back to stock Kitkat by using the LG flash tool. I ran into a problem where my phone went into Factory Reset Status 2. I'm now trying to follow this guide to completing this. http://forum.xda-developers.com/lg-g3/general/problem-returning-to-stock-try-t2862463
The problem I face now it that my computer won't list the phone under ports. I have downloaded the drivers. (Even re installed a few times) The phone gets listed under "Portable Devices" as LGE Android MTP Device. I need to be able to connect it to COM41 to fix this issue but I'm not sure what to do here. Any help is appreciated.
Click to expand...
Click to collapse
Should be able to just omit that step. When I used the flash tool mine was not listed under under ports when I did.
Should be listed under that after you change the setting.

##diag# ##3424# enable diag port

HELP! Fully Bricked LG G3 D855 Blank Screen

Hi,
I think I mistakenly flashing the Fastboot partition with all wrong version of Boot, Recovey and the rest of other partition.
Now phone is only turn with BLANK BLACK SCREEN, but USB Connection still active with COM assigned at port 41 (saw under device manager).
Anyone have idea how to flash it back to work, please .....
mKHMER

mkhmer said:
Hi,
I think I mistakenly flashing the Fastboot partition with all wrong version of Boot, Recovey and the rest of other partition.
Now phone is only turn with BLANK BLACK SCREEN, but USB Connection still active with COM assigned at port 41 (saw under device manager).
Anyone have idea how to flash it back to work, please .....
mKHMER
Click to expand...
Click to collapse
Search for latest stock rom 29 at the end of version number download an unzip to desktop.
Flash in Flashtool,at first take battery out and and flash only the bootloader uncheck everithing else !!!,when finisht disconect phone ,put battery in ,now in flashtool flash whole rom

Does your PC recognize your phone as Qualcomm HS-USB QDLoader 9008 or something else?

ludoke said:
Search for latest stock rom 29 at the end of version number download an unzip to desktop.
Flash in Flashtool,at first take battery out and and flash only the bootloader uncheck everithing else !!!,when finisht disconect phone ,put battery in ,now in flashtool flash whole rom
Click to expand...
Click to collapse
It dosn't recognize my USB driver, is there any driver needed to manually install? but if we put the battery it does [LGE AndroidNET COMx]

mkhmer said:
It dosn't recognize my USB driver, is there any driver needed to manually install? but if we put the battery it does [LGE AndroidNET COMx]
Click to expand...
Click to collapse
If PC doesn't recognize your device as Qualcomm HS-USB QDLoader 9008, you need to JTAG your device, or short pin.
Information about short pin;
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359

That look like we need to work direct on mainboard of the phone? anyway withou touching inside the phone?

mkhmer said:
That look like we need to work direct on mainboard of the phone? anyway withou touching inside the phone?
Click to expand...
Click to collapse
You have to disassembly your device.

My LG G3 is not recognised as stated above but as Android device LGE MOBILE ADB INTERFACE and i have no issues on Win 10.
The phone is also imidiatly detected by LG Pc Suite

ludoke said:
My LG G3 is not recognised as stated above but as Android device LGE MOBILE ADB INTERFACE and i have no issues on Win 10.
The phone is also imidiatly detected by LG Pc Suite
Click to expand...
Click to collapse
But when I remove the back cover, I see another stainless steel cover on those chip/board, how to remove it? Too risky!

http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359/page8#post63750296
Here is a brioef guide i am also facing that issue from alst five days.. hope some master help to solve that situation

HELP!
Soooo... I have LG G3 D855 32GB, i think i installed wrong version of TWRP recovery (for another phone). Phone is not charging, so battery is dead. NO boot, NO recovery and NO download mode. PC does not recognize phone with LG drivers and QDLoader USB driver installed. I already do a "short pin" and nothing changes at all. I am out of solutions, please help me.
I already tried:
https://www.reddit.com/r/LGG3/comments/41wbo3/how_to_unhardbrick_your_lg_g3_jtag/
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
http://forum.xda-developers.com/sprint-lg-g3/general/guide-how-to-restore-sprint-lg-g3-ls990-t2852042

ExtremeD722 said:
Soooo... I have LG G3 D855 32GB, i think i installed wrong version of TWRP recovery (for another phone). Phone is not charging, so battery is dead. NO boot, NO recovery and NO download mode. PC does not recognize phone with LG drivers and QDLoader USB driver installed. I already do a "short pin" and nothing changes at all. I am out of solutions, please help me.
I already tried:
https://www.reddit.com/r/LGG3/comments/41wbo3/how_to_unhardbrick_your_lg_g3_jtag/
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
http://forum.xda-developers.com/spr...de-how-to-restore-sprint-lg-g3-ls990-t2852042
Click to expand...
Click to collapse
Your computer recognize any serial port when you connect g3

[email protected] said:
Your computer recognize any serial port when you connect g3
Click to expand...
Click to collapse
Computer doesn't recognize anything... I tried all 4 ports (2 ports 3.0, 2 ports 2.0), with original cable and non-original(Sony) cable.

ExtremeD722 said:
I tried all 4 ports (2 ports 3.0, 2 ports 2.0), with original cable and non-original(Sony) cable.
Click to expand...
Click to collapse
I mean any responce in pc device manager when u connect ur mbl

[email protected] said:
I mean any responce in pc device manager when u connect ur mbl
Click to expand...
Click to collapse
No, device manager detects nothing. I have windows 10 (i tried in normal mode and test mode). And if I connect my G3 Beat computer crashes because of LG driver.( I tried different versions of LG drivers and always the same crash(error)).

ExtremeD722 said:
No, device manager detects nothing. I have windows 10 (i tried in normal mode and test mode). And if I connect my G3 Beat computer crashes because of LG driver.( I tried different versions of LG drivers and always the same crash(error)).
Click to expand...
Click to collapse
I think crashing driver due to window .Try to connect ur device at window 7 .Hope device manager show serial port or qhbulk.I was have same problem my g3 but i resolve by short wire method.Good luck
---------- Post added at 03:01 PM ---------- Previous post was at 02:53 PM ----------
ExtremeD722 said:
Soooo... I have LG G3 D855 32GB, i think i installed wrong version of TWRP recovery (for another phone). Phone is not charging, so battery is dead. NO boot, NO recovery and NO download mode. PC does not recognize phone with LG drivers and QDLoader USB driver installed. I already do a "short pin" and nothing changes at all. I am out of solutions, please help me.
I already tried:
https://www.reddit.com/r/LGG3/comments/41wbo3/how_to_unhardbrick_your_lg_g3_jtag/
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
http://forum.xda-developers.com/sprint-lg-g3/general/guide-how-to-restore-sprint-lg-g3-ls990-t2852042
Click to expand...
Click to collapse
Bro firt change ur window then install ur variant driver and qhbulk driver.After that if device manager show qhsub bulk port or something like then all problem will solve.If ur device manager show only lge serial port then use short wire method.:good:

[email protected] said:
I think crashing driver due to window .Try to connect ur device at window 7 .Hope device manager show serial port or qhbulk.I was have same problem my g3 but i resolve by short wire method.Good luck
Click to expand...
Click to collapse
I will try with other computers, but i have on all 3 computers win10...
Thx for respond !

ExtremeD722 said:
I will try with other computers, but i have on all 3 computers win10...
Thx for respond !
Click to expand...
Click to collapse
Then u should install window 7 because qhsub bulk will not dect on window 10.
---------- Post added at 04:11 PM ---------- Previous post was at 04:07 PM ----------
Bro when u install window 7 reply me if u get any issue.Be careful when u use short wire method because due to this method my g3 baseband and imei are unknow

[email protected] said:
Then u should install window 7 because qhsub bulk will not dect on window 10.
---------- Post added at 04:11 PM ---------- Previous post was at 04:07 PM ----------
Bro when u install window 7 reply me if u get any issue.Be careful when u use short wire method because due to this method my g3 baseband and imei are unknow
Click to expand...
Click to collapse
I will reply u soon. Why do u even need baseband and imei ?

Because my baseband. Unknown and imei is null

HELP LG G4 Bootloop issue

Recently after trying to upgrade my LG G4 to android 6.0 by flashing the zips in recovery, I encountered a boot loop. I have tried many thing like using the LG Flash Tool, I also tried booting into recovery and restoring a backup I made, but none of this made any difference. Please I need help.
LG G4 H815 android 5.1.1 or 6.0 (not sure) I'm not sure because I tried to flash the zips fro android 6.0 via recovery and didn't work, then I restored my phone and tried to boot up but that failed to work as well.

Try to use the LG bridge tool.
Start lg bridge.
Connect your device while off with your usb cable.
It will start - nevermind, just keep it going.
Use the "solve update issue" option in the bottom right corner of the software update screen in lg bridge.
It will reinstall 6.0 without data loss.

TheReino said:
Try to use the LG bridge tool.
Start lg bridge.
Connect your device while off with your usb cable.
It will start - nevermind, just keep it going.
Use the "solve update issue" option in the bottom right corner of the software update screen in lg bridge.
It will reinstall 6.0 without data loss.
Click to expand...
Click to collapse
It does not detect that the device is connected, even when it is.

Takes some time to detect. Worked for me an hour ago...

TheReino said:
Takes some time to detect. Worked for me an hour ago...
Click to expand...
Click to collapse
I might have fixed it using a different method.

Wich method?

I have the same issue.. I send my phone to the repair center of amazon. Let´s look what they can do.

Not necessary, in bootloop, just connect usb and start lgup, when it detect it, (and it will as unknown mode device) tap com port it was found on and ui will open, then click on phone info, it will connect and establish a valid usb connection to phone and open new prompt with phone info...... Then start adb command prompt and enter 'adb reboot recovery' and bingo you're in recovery.... Solves every bootloop!

spoonymoon said:
Not necessary, in bootloop, just connect usb and start lgup, when it detect it, (and it will as unknown mode device) tap com port it was found on and ui will open, then click on phone info, it will connect and establish a valid usb connection to phone and open new prompt with phone info...... Then start adb command prompt and enter 'adb reboot recovery' and bingo you're in recovery.... Solves every bootloop!
Click to expand...
Click to collapse
If the phone in bootloop, such phone does not see any one program
This phone can be started only in the DM

spoonymoon said:
Not necessary, in bootloop, just connect usb and start lgup, when it detect it, (and it will as unknown mode device) tap com port it was found on and ui will open, then click on phone info, it will connect and establish a valid usb connection to phone and open new prompt with phone info...... Then start adb command prompt and enter 'adb reboot recovery' and bingo you're in recovery.... Solves every bootloop!
Click to expand...
Click to collapse
How do you mean ?
tap com port it was found on
Click to expand...
Click to collapse

Device will not turn on LG G3 D855 32GB

Hello everyone.
I need your help.
My Device: LG G3 D855 32GB
The device does not turn on, the only thing that appears is because when I connect the device to a PC, I see a driver installed:
RELINK HS-USB QDLoader 9008
I read guides on site here, and I'm trying to order
I downloaded the software BoardDiag 2.9
I downloaded the files to the appropriate TOT
I extracted the files by instructors on site.
I opened the program and I followed the guide and it seems to me an error
Download mode is enabled Mode,
I quickly disconnects from the computer and reconnect the computer and then the moment I am unable to do a test and the results are:
AP CHECK START = PASS
EMMC TEST START
FAILED TO OPEN PARTITION FROM EMMC
TEST ABORTED !!
I tried a lot of tutorials but I can not, it always seems the device is in Download Mode
What can I do more?
Please your help,
Eliran

If you go that way, you will need bunch of other stuff. Here is the link
http://open-freax.fr/guide-unbrick-your-lg-g3/
It is a good thing that your PC recognises phone like that.
But first be sure that You can not enter download mode or recovery or even fastboot.
And please say what did you do to make it like that? Wrong flash?
If you CAN enter download mode than you can flash kdz or tot files from there. Easiest way is to use LGUP but you must be careful if you want to try.

The phone fell
Navuhodonosor said:
If you go that way, you will need bunch of other stuff. Here is the link
It is a good thing that your PC recognises phone like that.
But first be sure that You can not enter download mode or recovery or even fastboot.
And please say what did you do to make it like that? Wrong flash?
If you CAN enter download mode than you can flash kdz or tot files from there. Easiest way is to use LGUP but you must be careful if you want to try.
Click to expand...
Click to collapse
Thanks for the comment
The phone fell into the vehicle.
I know the phone is always in Download Mode
The software does not let me do anything and making phone download mode
I did not try to install KDZ.
And I can not open a setup KDZ because the device does not rise and there is no open port.
I only have the port I did above.

Thanks for the help, I worked in the guide and I could not ...
Navuhodonosor said:
If you go that way, you will need bunch of other stuff. Here is the link
It is a good thing that your PC recognises phone like that.
But first be sure that You can not enter download mode or recovery or even fastboot.
And please say what did you do to make it like that? Wrong flash?
If you CAN enter download mode than you can flash kdz or tot files from there. Easiest way is to use LGUP but you must be careful if you want to try.
Click to expand...
Click to collapse
Thanks for the help, I worked in the guide and I could not ...
I went through all the steps I found at:
Now, let’s get the party started
I set up the software the guide and I got an error:
FAIL on the EMMC test
I changed the parameter Read / Write »to« Erase
And again I got the error:
FAIL on the EMMC test
Then I try again, click Start, open a window and write in English and Chinese
Device DLOAD mode
device was not found in dload trying flash peogrammer
I click OK, the window closes and then when I press Start again, the window reappears.
Only when I disconnect the USB cable from the computer and the author briefly again then I’m able to do the test, but he failed.
FAIL on the EMMC test
The device always is in Download Mode and appears port:
RELINK HS-USB QDLoader 9008
My component can not be right at all and it always is in Download Mode?
I did not do short the guide, because the computer also detected me.
It has always seemed stuck in a download mode.
There is another option? Short elsewhere as will enable progress?
Thank you very much for your help,
Eliran

I need help please. What can i do
zarfati66 said:
Thanks for the help, I worked in the guide and I could not ...
I went through all the steps I found at:
Now, let’s get the party started
I set up the software the guide and I got an error:
FAIL on the EMMC test
I changed the parameter Read / Write »to« Erase
And again I got the error:
FAIL on the EMMC test
Then I try again, click Start, open a window and write in English and Chinese
Device DLOAD mode
device was not found in dload trying flash peogrammer
I click OK, the window closes and then when I press Start again, the window reappears.
Only when I disconnect the USB cable from the computer and the author briefly again then I’m able to do the test, but he failed.
FAIL on the EMMC test
The device always is in Download Mode and appears port:
RELINK HS-USB QDLoader 9008
My component can not be right at all and it always is in Download Mode?
I did not do short the guide, because the computer also detected me.
It has always seemed stuck in a download mode.
There is another option? Short elsewhere as will enable progress?
Thank you very much for your help,
Eliran
Click to expand...
Click to collapse
I need help please. What can i do

The phone woke for a moment ...
zarfati66 said:
I need help please. What can i do
Click to expand...
Click to collapse
Hello everyone
Today I tried again to connect the device to your computer, the screen comes on suddenly.
And see the state of battery with a question mark inside a yellow triangle.
I did not realize also saw installed driver
LGE AndroidNet USB Serial Port
I tried to re-install.
Now again became a black screen and the next thing happens:
When the device without a battery connected to a computer costing me
RELINK HS-USB QDLoader 9008
When I'm with a battery, it registers an unknown device.
When the device without a battery test again tried to do this EMMC component fails.
help please
Eliran

relink hs-USB Qdloader 9008
ZARFATI6 said:
Hello everyone
Today I tried again to connect the device to your computer, the screen comes on suddenly.
And see the state of battery with a question mark inside a yellow triangle.
I did not realize also saw installed driver
LGE AndroidNet USB Serial Port
I tried to re-install.
Now again became a black screen and the next thing happens:
When the device without a battery connected to a computer costing me
RELINK HS-USB QDLoader 9008
When I'm with a battery, it registers an unknown device.
When the device without a battery test again tried to do this EMMC component fails.
help please
Eliran
Click to expand...
Click to collapse
I am exactly in the same situation. Have you found any solution so far???? My phone suddenly stopped working and didn't boot up at all first and then I used the LG Flashtool to install original TOT file and all went well. I forgot to close LG Flashtool and it started flashing again. LG Flash tool restarts the phone at about 80% and then it failed at that point and since then I am having this issue.................
Any solution???????

apur32 said:
I am exactly in the same situation. Have you found any solution so far???? My phone suddenly stopped working and didn't boot up at all first and then I used the LG Flashtool to install original TOT file and all went well. I forgot to close LG Flashtool and it started flashing again. LG Flash tool restarts the phone at about 80% and then it failed at that point and since then I am having this issue.................
Any solution???????
Click to expand...
Click to collapse
Same situation too, solutions yet?

Hey I have the same problem .
If any of you found the solution please post it here or pm me, I am stuck

[HELP] G3 Hardbrick Help! URGENT!

Here's my case:
I've got a LG G3 F400L (Korean LGU Variant), its on Marshmallow(6.0), and for all I know I used the Autorec program for Lollipop, and apparently got my bootloader corrupted; No led flashing, no display. But the Qualcomm 9008 serial port is shown on the device manager and I can use Boardiag to detect it. I know, irony and idiocy made this dilemma.
Diagnostics:
I've used Boardiag 2.99a by willcracker and yes I've checked "AP check" and "EMMC TEST" and both are tagged as "Pass", but when it comes to the "SDRAM TEST" it throws off an error indicating that there is a flash error on partition "boot" along with a 0x3000 and I can't progress beyond that, I've also tried to use the "Restore Device" option to revive it but still the later error still persists.
I've also tried Smart Boot Diagnostics but the problem is that my device's AP Chip doesn't exist on the current version of the tool.
What I would like to press on:
I would want to resolve this on my own and that no amount of suggesting on sending this to the service center would yield fruit. Please do understand, I would also like this to be a thread that can help me and other on resolving their corrupted bootloader units.
Please, can someone help me on my dilemma. Thank you very much. Any amount of help is appreciated.

Try using board diag with the battery unplugged.
Sent from my SM-G935T using Tapatalk

Already tried that but still nothing works.
Current situation:
Alas, I've accessed fastboot and had wiped the boot partition, but now the USB is detected as "LGE AndroidNet USB Serial Port."

FeitX said:
Already tried that but still nothing works.
Current situation:
Alas, I've accessed fastboot and had wiped the boot partition, but now the USB is detected as "LGE AndroidNet USB Serial Port."
Click to expand...
Click to collapse
You need to short with a cable internet connection I do this last night and changes for Qalcomm USB in the same time...After that, you need to open BoarDiag and do the process. If you can´t enter in download mode, you need in BoarDiag pass the USERDATA
I follow this link: http://open-freax.fr/guide-unbrick-your-lg-g3/