does anybody know whats keeping sprint htc 10 from booting aosp roms? is it the mm firmware hos has it never booted? will it boot once we get official nougat? i'm kinda scared of s-offing and flashing us unlocked firmware because i've read people brick there device when the flash back to stock which I'll do when i resell it. thank you
attached is the only logcat i could get in a bootloop
logcat.......look at the 4th to last line.....what do you think
--------- beginning of main
01-06 02:29:37.565 540 540 W auditd : type=2000 audit(0.0:1): initialized
01-06 02:29:38.739 540 540 I auditd : type=1403 audit(0.0:2): policy loaded auid=4294967295 ses=4294967295
01-06 02:29:38.739 540 540 W auditd : type=1404 audit(0.0:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
01-06 02:29:39.319 425 425 W ueventd : type=1400 audit(0.0:4): avc: denied { relabelfrom } for name="rmi0" dev="tmpfs" ino=16643 scontext=u:r:ueventd:s0 tcontext=ubject_r:device:s0 tclass=chr_file permissive=0
01-06 02:29:40.079 1 1 W init : type=1400 audit(0.0:5): avc: denied { write } for name="tracing_on" dev="debugfs" ino=2008 scontext=u:r:init:s0 tcontext=ubject_r:debugfs:s0 tclass=file permissive=0
01-06 02:29:40.559 549 549 I : debuggerd: starting
01-06 02:29:40.598 548 548 I : debuggerd: starting
--------- beginning of system
01-06 02:29:40.604 550 550 I vold : Vold 3.0 (the awakening) firing up
01-06 02:29:40.604 550 550 V vold : Detected support for: exfat ext4 ntfs vfat
01-06 02:29:40.887 550 556 D vold : e4crypt_init_user0
01-06 02:29:40.888 550 556 D vold : e4crypt_prepare_user_storage for volume null, user 0, serial 0, flags 1
01-06 02:29:40.888 550 556 D vold : Preparing: /data/system/users/0
01-06 02:29:40.888 550 556 E cutils : Failed to mkdir(/data/system/users/0): No such file or directory
01-06 02:29:40.888 550 556 E vold : Failed to prepare /data/system/users/0: No such file or directory
01-06 02:29:40.888 550 556 E vold : Failed to prepare user 0 storage
01-06 02:29:40.888 1 1 I vdc : 400 551 Command failed
01-06 02:29:40.889 1 1 I vdc : vdc terminated by exit(144)
01-06 02:29:40.904 557 557 I /system/bin/tzdatacheck: tzdata file /data/misc/zoneinfo/current/tzdata does not exist. No action required.
01-06 02:29:40.931 561 561 I sysinit : Running /system/etc/init.d/00banner
01-06 02:29:40.947 563 563 I cm : ###### ######
01-06 02:29:40.954 564 564 I cm : # # ###### #### # # ##### ##### ###### #### ##### # #### # # # # ###### # # # # #
01-06 02:29:40.962 565 565 I cm : # # # # # # # # # # # # # # # # # ## # # # # ## ## # # #
01-06 02:29:40.970 566 566 I cm : ###### ##### #### # # # # # # ##### # # # # # # # # ###### ##### # ## # # ##
01-06 02:29:40.977 567 567 I cm : # # # # # # ##### ##### # # # # # # # # # # # # # # # ##
01-06 02:29:40.985 568 568 I cm : # # # # # # # # # # # # # # # # # # # ## # # # # # # # #
01-06 02:29:40.993 569 569 I sysinit : Running /system/etc/init.d/90userinit
01-06 02:29:41.675 587 587 I lowmemorykiller: Using in-kernel low memory killer interface
01-06 02:29:41.688 583 583 I rpmb_emmc: RPMB Mult (512-bytes sector) = 8192, Rel_sec_cnt = 32
01-06 02:29:41.688 583 583 E DrmLibRpmb: rpmb_init succeeded! with ret = 0
01-06 02:29:41.692 582 582 I PerMgrSrv: Adding entry for modem : offTimeout : 500 ackTimeout : 200
01-06 02:29:41.694 583 583 E SSD : ssd_init_service succeeded!
01-06 02:29:41.698 582 582 I PerMgrSrv: Adding entry for slpi : offTimeout : 5000 ackTimeout : 200
01-06 02:29:41.707 582 582 I PerMgrSrv: Peripheral Mananager service start
01-06 02:29:41.707 582 582 I PerMgrSrv: power-off timeout 500,ms; event-ack timeout 200,ms; debug-mode false
01-06 02:29:41.707 582 582 I PerMgrSrv: Statistics for : modem
01-06 02:29:41.708 582 582 I PerMgrSrv: modem: Current State : is off-line
01-06 02:29:41.708 582 582 I PerMgrSrv: modem: Voter/Listener count : 0/0
01-06 02:29:41.708 582 582 I PerMgrSrv: modem: Power on count : 0
01-06 02:29:41.708 582 582 I PerMgrSrv: modem: Power off count: 0
01-06 02:29:41.708 582 582 I PerMgrSrv: modem: Client list:
01-06 02:29:41.708 582 582 I PerMgrSrv: Statistics for : slpi
01-06 02:29:41.708 582 582 I PerMgrSrv: slpi: Current State : is off-line
01-06 02:29:41.708 582 582 I PerMgrSrv: slpi: Voter/Listener count : 0/0
01-06 02:29:41.708 582 582 I PerMgrSrv: slpi: Power on count : 0
01-06 02:29:41.708 582 582 I PerMgrSrv: slpi: Power off count: 0
01-06 02:29:41.708 582 582 I PerMgrSrv: slpi: Client list:
01-06 02:29:41.711 590 590 I SurfaceFlinger: SurfaceFlinger is starting
01-06 02:29:41.713 590 590 I SurfaceFlinger: SurfaceFlinger's main thread ready to run. Initializing graphics H/W...
01-06 02:29:41.720 582 603 I PerMgrSrv: QMI service start
01-06 02:29:41.722 593 593 E PerMgrProxy: Starting pm-proxy service
01-06 02:29:41.723 593 593 I PerMgrProxy: Found internal modem
01-06 02:29:41.724 582 604 D PerMgrSrv: modem state: is off-line, add client PM-PROXY-THREAD
01-06 02:29:41.724 582 604 D PerMgrSrv: PM-PROXY-THREAD registered
01-06 02:29:41.724 593 593 D PerMgrLib: PM-PROXY-THREAD successfully registered for modem
01-06 02:29:41.724 593 593 I PerMgrProxy: pm-proxy-thread Voting for internal modem
01-06 02:29:41.724 593 593 D PerMgrLib: PM-PROXY-THREAD voting for modem
01-06 02:29:41.726 590 590 D libEGL : loaded /vendor/lib64/egl/libEGL_adreno.so
01-06 02:29:41.729 582 607 D PerMgrSrv: PM-PROXY-THREAD voting for modem
01-06 02:29:41.729 582 607 D PerMgrSrv: modem new state: going on-line
01-06 02:29:41.729 582 607 D PerMgrSrv: modem num voters is 1
01-06 02:29:41.729 615 615 D QSEECOMAPI: QSEECom_register_listener 8192 sb_length = 0x6400
01-06 02:29:41.731 615 615 D QSEECOMAPI: QSEECom_register_listener 12288 sb_length = 0x5000
01-06 02:29:41.732 615 615 D QSEECOMAPI: QSEECom_register_listener 16384 sb_length = 0x10a8
01-06 02:29:41.760 615 615 D DrmLibTime: QSEE Time Listener: atime_start
01-06 02:29:41.760 615 615 D QSEECOMAPI: QSEECom_register_listener 11 sb_length = 0x5000
01-06 02:29:41.760 615 615 D DrmLibTime: registering fs service to QSEECom is done!
01-06 02:29:41.761 615 615 D DrmLibTime: begin to create a thread!
01-06 02:29:41.761 615 615 D DrmLibTime: Creating a pthread in atime_start is done! return 0
01-06 02:29:41.761 615 620 D DrmLibTime: QSEE Time Listener: dispatch
01-06 02:29:41.761 615 620 D DrmLibTime: before calling ioctl to read the next time_cmd
01-06 02:29:41.764 615 615 D QSEECOMAPI: QSEECom_register_listener 10 sb_length = 0x5000
01-06 02:29:41.765 615 615 D QSEECOMAPI: QSEECom_register_listener 28672 sb_length = 0x7e000
01-06 02:29:41.774 615 623 I QISL : QSEE Interrupt Service Listener Thread is started
01-06 02:29:41.774 615 623 D QSEECOMAPI: QSEECom_register_listener 36864 sb_length = 0x1f4
01-06 02:29:41.775 615 623 I QISL : QSEE Interrupt Service Listener was activated successfully
01-06 02:29:41.790 615 615 D QSEECOMAPI: QSEECom_register_listener 4352 sb_length = 0x5000
01-06 02:29:41.791 615 615 D QSEECOMAPI: QSEECom_get_handle sb_length = 0x400
01-06 02:29:41.791 615 615 D QSEECOMAPI: App is not loaded in QSEE
01-06 02:29:41.793 615 615 D QSEECOMAPI: app_arch = 1, total_files = 8
01-06 02:29:41.838 615 615 E QSEECOMAPI: Error::Load image request failed ret = -1, errno = 22
01-06 02:29:41.839 615 615 E QSEECOMAPI: Error::Loading image failed with ret = -1
01-06 02:29:41.839 615 615 D QSEECOMAPI: QSEECom_get_handle sb_length = 0x400
01-06 02:29:41.839 615 615 D QSEECOMAPI: App is already loaded QSEE and app id = 4
01-06 02:29:41.890 590 590 D libEGL : loaded /vendor/lib64/egl/libGLESv1_CM_adreno.so
01-06 02:29:41.899 590 590 D libEGL : loaded /vendor/lib64/egl/libGLESv2_adreno.so
01-06 02:29:41.926 590 590 I Adreno : QUALCOMM build : e781517, I9267f384df
01-06 02:29:41.926 590 590 I Adreno : Build Date : 10/26/16
01-06 02:29:41.926 590 590 I Adreno : OpenGL ES Shader Compiler Version: XE031.09.00.03
01-06 02:29:41.926 590 590 I Adreno : Local Branch :
01-06 02:29:41.926 590 590 I Adreno : Remote Branch : refs/tags/AU_LINUX_ANDROID_LA.UM.5.5.R1.07.00.00.269.009
01-06 02:29:41.926 590 590 I Adreno : Remote Branch : NONE
01-06 02:29:41.926 590 590 I Adreno : Reconstruct Branch : NOTHING
01-06 02:29:42.162 590 590 I SDM : ExtensionInterface::CreateExtensionInterface:
01-06 02:29:42.162 590 590 I SDM : SDM-EXTENSION Version: Date: 09/24/16, Commit: a8223a7, Change: Ib6653f6a84
01-06 02:29:42.163 590 590 I SDM : HWInfo::GetHWResourceInfo: SDE Version = 500, SDE Revision = 10070002, RGB = 4, VIG = 4, DMA = 2, Cursor = 2
01-06 02:29:42.163 590 590 I SDM : HWInfo::GetHWResourceInfo: Upscale Ratio = 20, Downscale Ratio = 4, Blending Stages = 7
01-06 02:29:42.163 590 590 I SDM : HWInfo::GetHWResourceInfo: SourceSplit = 1 QSEED3 = 0
01-06 02:29:42.163 590 590 I SDM : HWInfo::GetHWResourceInfo: BWC = 0, UBWC = 1, Decimation = 1, Tile Format = 0 Concurrent Writeback = 0
01-06 02:29:42.163 590 590 I SDM : HWInfo::GetHWResourceInfo: MaxLowBw = 9600000 , MaxHighBw = 9600000
01-06 02:29:42.163 590 590 I SDM : HWInfo::GetHWResourceInfo: MaxPipeBw = 4500000 KBps, MaxSDEClock = 412500000 Hz, ClockFudgeFactor = 1.050000
01-06 02:29:42.163 590 590 I SDM : HWInfo::GetHWResourceInfo: Prefill factors: Tiled_NV12 = 8, Tiled = 4, Linear = 1, Scale = 1, Fudge_factor = 2
01-06 02:29:42.163 590 590 I SDM : HWInfo::GetMDSSRotatorInfo: MDSS Rotator: Count = 2, Downscale = 1
01-06 02:29:42.169 590 590 I SDM : CoreInterface::CreateCore: Open interface handle = 0x7f99679600
01-06 02:29:42.170 590 590 I SDM : HWInfo::GetFirstDisplayInterfaceType: First display is internal display
01-06 02:29:42.170 590 590 I SDM : CPUHint::Init: CPU Hint Pre-enable Window 50
01-06 02:29:42.171 590 590 I SDM : CPUHint::Init: Successfully Loaded Vendor Extension Library symbols
01-06 02:29:42.172 590 590 I SDM : HWDevice::GetHWPanelMaxBrightnessFromNode: Max brightness level = 255
01-06 02:29:42.172 590 590 I SDM : HWDevice::GetHWPanelMaxBrightnessFromNode: Max brightness level = 255
01-06 02:29:42.172 590 590 I SDM : HWDevice:opulateHWPanelInfo: Device type = 0, Display Port = 1, Display Mode = 2, Device Node = 0, Is Primary = 1
01-06 02:29:42.172 590 590 I SDM : HWDevice:opulateHWPanelInfo: Partial Update = 0, Dynamic FPS = 0
01-06 02:29:42.172 590 590 I SDM : HWDevice:opulateHWPanelInfo: Align: left = 0, width = 0, top = 0, height = 0
01-06 02:29:42.172 590 590 I SDM : HWDevice:opulateHWPanelInfo: ROI: min_width = 0, min_height = 0, need_merge = 0
01-06 02:29:42.172 590 590 I SDM : HWDevice:opulateHWPanelInfo: FPS: min = 0, max =0
01-06 02:29:42.172 590 590 I SDM : HWDevice:opulateHWPanelInfo: Left Split = 0, Right Split = 0
01-06 02:29:42.173 590 590 I SDM : HWInfo::GetHWResourceInfo: SDE Version = 500, SDE Revision = 10070002, RGB = 4, VIG = 4, DMA = 2, Cursor = 2
01-06 02:29:42.173 590 590 I SDM : HWInfo::GetHWResourceInfo: Upscale Ratio = 20, Downscale Ratio = 4, Blending Stages = 7
01-06 02:29:42.173 590 590 I SDM : HWInfo::GetHWResourceInfo: SourceSplit = 1 QSEED3 = 0
01-06 02:29:42.173 590 590 I SDM : HWInfo::GetHWResourceInfo: BWC = 0, UBWC = 1, Decimation = 1, Tile Format = 0 Concurrent Writeback = 0
01-06 02:29:42.173 590 590 I SDM : HWInfo::GetHWResourceInfo: MaxLowBw = 9600000 , MaxHighBw = 9600000
01-06 02:29:42.173 590 590 I SDM : HWInfo::GetHWResourceInfo: MaxPipeBw = 4500000 KBps, MaxSDEClock = 412500000 Hz, ClockFudgeFactor = 1.050000
01-06 02:29:42.173 590 590 I SDM : HWInfo::GetHWResourceInfo: Prefill factors: Tiled_NV12 = 8, Tiled = 4, Linear = 1, Scale = 1, Fudge_factor = 2
01-06 02:29:42.173 590 590 I SDM : HWInfo::GetMDSSRotatorInfo: MDSS Rotator: Count = 2, Downscale = 1
01-06 02:29:42.174 590 590 I SDM : HWDevice::GetHWPanelMaxBrightnessFromNode: Max brightness level = 255
01-06 02:29:42.175 590 590 I SDM : HWDevice::GetHWPanelMaxBrightnessFromNode: Max brightness level = 255
01-06 02:29:42.175 590 590 I SDM : HWDevice::GetHWPanelMaxBrightnessFromNode: Max brightness level = 255
01-06 02:29:42.175 590 590 I SDM : HWDevice::GetHWPanelMaxBrightnessFromNode: Max brightness level = 255
01-06 02:29:42.176 590 590 I SDM : HWInfo::GetHWResourceInfo: SDE Version = 500, SDE Revision = 10070002, RGB = 4, VIG = 4, DMA = 2, Cursor = 2
01-06 02:29:42.176 590 590 I SDM : HWInfo::GetHWResourceInfo: Upscale Ratio = 20, Downscale Ratio = 4, Blending Stages = 7
01-06 02:29:42.176 590 590 I SDM : HWInfo::GetHWResourceInfo: SourceSplit = 1 QSEED3 = 0
01-06 02:29:42.176 590 590 I SDM : HWInfo::GetHWResourceInfo: BWC = 0, UBWC = 1, Decimation = 1, Tile Format = 0 Concurrent Writeback = 0
01-06 02:29:42.176 590 590 I SDM : HWInfo::GetHWResourceInfo: MaxLowBw = 9600000 , MaxHighBw = 9600000
01-06 02:29:42.176 590 590 I SDM : HWInfo::GetHWResourceInfo: MaxPipeBw = 4500000 KBps, MaxSDEClock = 412500000 Hz, ClockFudgeFactor = 1.050000
01-06 02:29:42.176 590 590 I SDM : HWInfo::GetHWResourceInfo: Prefill factors: Tiled_NV12 = 8, Tiled = 4, Linear = 1, Scale = 1, Fudge_factor = 2
01-06 02:29:42.176 590 590 I SDM : HWInfo::GetMDSSRotatorInfo: MDSS Rotator: Count = 2, Downscale = 1
01-06 02:29:42.177 590 590 W SDM : ColorManager::CreateColorManagerProxy: PAV2 version is versions = 11, version = 11
01-06 02:29:42.177 590 590 I SDM : DisplayBase::SetFrameBufferConfig: New framebuffer resolution (1440x2560)
01-06 02:29:42.177 590 590 I SDM : HWCDisplay::SetFrameBufferResolution: New framebuffer resolution (1440x2560)
01-06 02:29:42.180 590 590 I SDM : HWCColorManager::CreateColorManager: Successfully loaded libsdm-disp-apis.so
01-06 02:29:42.182 590 590 W SDM : HWCColorManager::CreateColorManager: Unable to load = libsdm-diag.so
01-06 02:29:42.183 590 590 I SurfaceFlinger: Using composer version 1.5
01-06 02:29:42.183 590 590 W SDM : HWCDisplay::GetDisplayAttributes: Spurious attribute type = 6
01-06 02:29:42.184 590 590 I SurfaceFlinger: EGL information:
01-06 02:29:42.184 590 590 I SurfaceFlinger: vendor : Android
01-06 02:29:42.184 590 590 I SurfaceFlinger: version : 1.4 Android META-EGL
01-06 02:29:42.184 590 590 I SurfaceFlinger: extensions: EGL_KHR_get_all_proc_addresses EGL_ANDROID_presentation_time EGL_KHR_swap_buffers_with_damage EGL_ANDROID_create_native_client_buffer EGL_ANDROID_front_buffer_auto_refresh EGL_KHR_image EGL_KHR_image_base EGL_KHR_lock_surface EGL_KHR_gl_texture_2D_image EGL_KHR_gl_texture_3D_image EGL_KHR_gl_texture_cubemap_image EGL_KHR_gl_renderbuffer_image EGL_KHR_reusable_sync EGL_KHR_fence_sync EGL_KHR_create_context EGL_KHR_surfaceless_context EGL_EXT_create_context_robustness EGL_ANDROID_image_native_buffer EGL_KHR_wait_sync EGL_ANDROID_recordable EGL_KHR_partial_update EGL_KHR_create_context_no_error EGL_KHR_mutable_render_buffer EGL_EXT_yuv_surface EGL_EXT_protected_content
01-06 02:29:42.184 590 590 I SurfaceFlinger: Client API: OpenGL_ES
01-06 02:29:42.184 590 590 I SurfaceFlinger: EGLSurface: 8-8-8-8, config=0x7f997fb040
01-06 02:29:42.188 590 590 I SurfaceFlinger: OpenGL ES informations:
01-06 02:29:42.188 590 590 I SurfaceFlinger: vendor : Qualcomm
01-06 02:29:42.188 590 590 I SurfaceFlinger: renderer : Adreno (TM) 530
01-06 02:29:42.188 590 590 I SurfaceFlinger: version : OpenGL ES 3.2 [email protected] ([email protected])
01-06 02:29:42.188 590 590 I SurfaceFlinger: extensions: GL_OES_EGL_image GL_OES_EGL_image_external GL_OES_EGL_sync GL_OES_vertex_half_float GL_OES_framebuffer_object GL_OES_rgb8_rgba8 GL_OES_compressed_ETC1_RGB8_texture GL_AMD_compressed_ATC_texture GL_KHR_texture_compression_astc_ldr GL_KHR_texture_compression_astc_hdr GL_OES_texture_compression_astc GL_OES_texture_npot GL_EXT_texture_filter_anisotropic GL_EXT_texture_format_BGRA8888 GL_OES_texture_3D GL_EXT_color_buffer_float GL_EXT_color_buffer_half_float GL_QCOM_alpha_test GL_OES_depth24 GL_OES_packed_depth_stencil GL_OES_depth_texture GL_OES_depth_texture_cube_map GL_EXT_sRGB GL_OES_texture_float GL_OES_texture_float_linear GL_OES_texture_half_float GL_OES_texture_half_float_linear GL_EXT_texture_type_2_10_10_10_REV GL_EXT_texture_sRGB_decode GL_OES_element_index_uint GL_EXT_copy_image GL_EXT_geometry_shader GL_EXT_tessellation_shader GL_OES_texture_stencil8 GL_EXT_shader_io_blocks GL_OES_shader_image_atomic GL_OES_sample_variables GL_EXT_texture_border_clamp GL_EXT_multisampled_render_to_texture
01-06 02:29:42.188 590 590 I SurfaceFlinger: GL_MAX_TEXTURE_SIZE = 16384
01-06 02:29:42.188 590 590 I SurfaceFlinger: GL_MAX_VIEWPORT_DIMS = 16384
01-06 02:29:42.397 590 590 D SurfaceFlinger: SF. shader cache generated - 26 shaders in 207.980209 ms
01-06 02:29:42.399 590 590 D SurfaceFlinger: Set power mode=2, type=0 flinger=0x7f99648000
01-06 02:29:42.399 590 590 I SDM : HWCDisplay::SetPowerMode: display = 0, mode = 2
01-06 02:29:42.400 590 590 I SDM : DisplayBase::SetDisplayState: Set state = 1, display 0
01-06 02:29:42.426 590 590 I SDM : HWCDisplayPrimary:repare: Skipping null commit on cmd mode panel
01-06 02:29:42.436 590 590 I SDM : HWCDisplayPrimary::Commit: Skipping null commit on cmd mode panel
01-06 02:29:42.436 590 590 D qdutils : DEBUG_CALC_FPS: 0
01-06 02:29:42.436 590 590 D qdutils : period: 10
01-06 02:29:42.436 590 590 D qdutils : ignorethresh_us: 500000
01-06 02:29:42.436 594 594 I Dpps : static DppsServer *DppsServer::GetInstance(): DppsServer ref count increased to 1
01-06 02:29:42.437 594 594 I Dpps : InitPrimaryContextFeatures():270 Dpps feature enable properties are false, skipping primary feature context init
01-06 02:29:42.686 648 651 D libEGL : loaded /vendor/lib64/egl/libEGL_adreno.so
01-06 02:29:42.697 648 651 D libEGL : loaded /vendor/lib64/egl/libGLESv1_CM_adreno.so
01-06 02:29:42.699 590 590 I SDM : HWCDisplayPrimary:repare: Skipping null commit on cmd mode panel
01-06 02:29:42.705 590 590 I SDM : HWCDisplayPrimary::Commit: Skipping null commit on cmd mode panel
01-06 02:29:42.706 648 651 D libEGL : loaded /vendor/lib64/egl/libGLESv2_adreno.so
01-06 02:29:42.716 648 651 I Adreno : QUALCOMM build : e781517, I9267f384df
01-06 02:29:42.716 648 651 I Adreno : Build Date : 10/26/16
01-06 02:29:42.716 648 651 I Adreno : OpenGL ES Shader Compiler Version: XE031.09.00.03
01-06 02:29:42.716 648 651 I Adreno : Local Branch :
01-06 02:29:42.716 648 651 I Adreno : Remote Branch : refs/tags/AU_LINUX_ANDROID_LA.UM.5.5.R1.07.00.00.269.009
01-06 02:29:42.716 648 651 I Adreno : Remote Branch : NONE
01-06 02:29:42.716 648 651 I Adreno : Reconstruct Branch : NOTHING
01-06 02:29:42.723 648 651 E BootAnimation: Get Carrier Animation file,since it's not support carrier
01-06 02:29:42.723 648 651 E BootAnimation: Get Carrier Animation file,since it's not support carrier
01-06 02:29:42.723 648 651 E BootAnimation: Get Carrier Animation file,since it's not support carrier
01-06 02:29:42.725 648 651 E BootAnimation: Get Carrier Animation file,since it's not support carrier
01-06 02:29:42.876 648 651 D BootAnimation: Free memory: 3590908, max texture size: 16384
01-06 02:29:42.876 648 651 D BootAnimation: Disabled bootanimation texture cache, FPS drops might occur.
01-06 02:29:42.942 582 604 D PerMgrSrv: modem new state: is on-line
01-06 02:29:45.152 648 651 D BootAnimation: Free memory: 3576124, max texture size: 16384
01-06 02:29:45.152 648 651 D BootAnimation: Disabled bootanimation texture cache, FPS drops might occur.
01-06 02:29:46.839 615 615 D QSEECOMAPI: QSEECom_load_external_elf
01-06 02:29:46.840 615 615 E QSEECOMAPI: Error::Cannot open the file /firmware/image/mc_v2.mdt errno = 2
01-06 02:29:46.840 615 615 E QSEECOMAPI: Error::Loading image failed with ret = -1
01-06 02:29:46.840 615 615 D QSEECOMAPI: QSEECom_load_external_elf
01-06 02:29:46.845 615 615 D QSEECOMAPI: app_arch = 1, total_files = 8
Be more specific. I have read threads of AOSP Roma booting fine. Is it cuz you have MM firmware, trying to flash a nougat ROM? More info is helpful.
Sent from my 2PS64 using XDA-Developers Legacy app
scottspa74 said:
Be more specific. I have read threads of AOSP Roma booting fine. Is it cuz you have MM firmware, trying to flash a nougat ROM? More info is helpful.
Sent from my 2PS64 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Well sprint doesn't seem to think that we need nougat...so i dont have nouhat firmware
Related
So that minimum posts till you can post on the dev forums the best thing that the admins could've done for the good of this excellent forum!!
Anyway, just followed the instructions in this thread (http://forum.xda-developers.com/showthread.php?t=2165711) and I am getting no progress, logcat shows it gets stuck after SensorService errors and it will hang there.
I'd post this in the other thread but I can't. I know LaidbackNikez said he won't help anymore on the subject but I'm sure there is someone else out there that knows what's going wrong.
Any explanations?
Code:
--------- beginning of /dev/alog/main
I/ev ( 88): Welcome to Android /
I/ev ( 89): Attempting to boot Evervolv AOSP JellyBean ROM.
I/ev ( 90): Please visit www.evervolv.com for updates.
I/ev ( 91): __________ ______
I/ev ( 92): ___ ____/__ ________________ __________ /__ __
I/ev ( 93): __ __/ __ | / / _ \_ ___/_ | / / __ \_ /__ | / /
I/ev ( 94): _ /___ __ |/ // __/ / __ |/ // /_/ / / __ |/ /
I/ev ( 95): /_____/ _____/ \___//_/ _____/ \____//_/ _____/
I/ev ( 96):
I/run-parts( 83): vm.swappiness = 20
I/run-parts( 83): vm.min_free_kbytes = 8192
I/run-parts( 83): vm.dirty_ratio = 60
I/run-parts( 83): vm.dirty_background_ratio = 20
I/run-parts( 83): vm.vfs_cache_pressure = 40
I/installd( 111): installd firing up
E/cutils ( 111): Failed to read /data/.layout_version: No such file or directory
D/AK8973 ( 115): AK8973 daemon 1.3.4 Start
D/AK8973 ( 115): (Library version : 1.2.1.620)
D/installd( 111): Upgrading /data/media for multi-user
D/installd( 111): Upgrading to shared /data/media/obb
I/DEBUG ( 106): debuggerd: Feb 25 2013 02:34:27
I/SurfaceFlinger( 108): SurfaceFlinger is starting
I/SurfaceFlinger( 108): SurfaceFlinger's main thread ready to run. Initializing graphics H/W...
D/libEGL ( 108): loaded /system/lib/egl/libEGL_adreno200.so
D/libEGL ( 108): loaded /system/lib/egl/libGLESv1_CM_adreno200.so
D/libEGL ( 108): loaded /system/lib/egl/libGLESv2_adreno200.so
I/ServiceManager( 113): Waiting for service SurfaceFlinger...
I/Adreno200-EGL( 108): <qeglDrvAPI_eglInitialize:294>: EGL 1.4 QUALCOMM build: AU_LINUX_ANDROID_JB.04.01.01.00.036_msm8960_JB_CL2644550_release_AU (CL2644550)
I/Adreno200-EGL( 108): Build Date: 07/31/12 Tue
I/Adreno200-EGL( 108): Local Branch:
I/Adreno200-EGL( 108): Remote Branch: quic/master
I/Adreno200-EGL( 108): Local Patches: NONE
I/Adreno200-EGL( 108): Reconstruct Branch: AU_LINUX_ANDROID_JB.04.01.01.00.036 + NOTHING
I/gralloc ( 108): using (fd=19)
I/gralloc ( 108): id = msmfb31_0
I/gralloc ( 108): xres = 480 px
I/gralloc ( 108): yres = 800 px
I/gralloc ( 108): xres_virtual = 480 px
I/gralloc ( 108): yres_virtual = 1600 px
I/gralloc ( 108): bpp = 32
I/gralloc ( 108): r = 0:8
I/gralloc ( 108): g = 8:8
I/gralloc ( 108): b = 16:8
I/gralloc ( 108): width = 48 mm (254.000000 dpi)
I/gralloc ( 108): height = 80 mm (254.000000 dpi)
I/gralloc ( 108): refresh rate = 60.00 Hz
D/CALCFPS ( 108): DEBUG_CALC_FPS: 0
D/CALCFPS ( 108): period: 10
D/CALCFPS ( 108): ignorethresh_us: 500000
D/CALCFPS ( 108): DEBUG_CALC_FPS: 0
D/CALCFPS ( 108): period: 10
D/CALCFPS ( 108): ignorethresh_us: 500000
I/hwcomposer( 108): Initializing Qualcomm Hardware Composer
I/hwcomposer( 108): MDP version: 310
I/hwcomposer( 108): DYN composition threshold : 2.000000
I/hwcomposer( 108): hwc_device_open: Faking Hardware VSYNC
I/SurfaceFlinger( 108): Using composer version 1.0
I/hwcomposer( 108): Initializing UEvent Listener Thread
I/hwcomposer( 108): Initializing VSYNC Thread
W/SurfaceFlinger( 108): getting VSYNC period from fb HAL: 16666666
W/Adreno200-EGL( 108): <qeglDrvAPI_eglChooseConfig:780>: EGL_BAD_ATTRIBUTE
W/SurfaceFlinger( 108): no suitable EGLConfig found, trying without EGL_FRAMEBUFFER_TARGET_ANDROID
W/SurfaceFlinger( 108): no suitable EGLConfig found, trying without EGL_RECORDABLE_ANDROID
I/SurfaceFlinger( 108): EGL informations:
I/SurfaceFlinger( 108): vendor : Android
I/SurfaceFlinger( 108): version : 1.4 Android META-EGL
I/SurfaceFlinger( 108): extensions: EGL_KHR_image EGL_KHR_image_base EGL_KHR_gl_texture_2D_image EGL_KHR_gl_texture_cubemap_image EGL_KHR_gl_renderbuffer_image EGL_KHR_fence_sync EGL_EXT_create_context_robustness EGL_ANDROID_image_native_buffer
I/SurfaceFlinger( 108): Client API: OpenGL_ES
I/SurfaceFlinger( 108): EGLSurface: 8-8-8-0, config=0x7
I/SurfaceFlinger( 108): OpenGL ES informations:
I/SurfaceFlinger( 108): vendor : Qualcomm
I/SurfaceFlinger( 108): renderer : Adreno (TM) 200
I/SurfaceFlinger( 108): version : OpenGL ES-CM 1.1
I/SurfaceFlinger( 108): extensions: GL_EXT_debug_marker GL_AMD_compressed_ATC_texture GL_AMD_performance_monitor GL_APPLE_texture_2D_limited_npot GL_ARB_vertex_buffer_object GL_EXT_texture_filter_anisotropic GL_EXT_texture_format_BGRA8888 GL_EXT_texture_type_2_10_10_10_REV GL_OES_blend_equation_separate GL_OES_blend_func_separate GL_OES_blend_subtract GL_OES_compressed_ETC1_RGB8_texture GL_OES_compressed_paletted_texture GL_OES_depth_texture GL_OES_depth24 GL_OES_draw_texture GL_OES_EGL_image GL_OES_EGL_image_external GL_OES_framebuffer_object GL_OES_matrix_palette GL_OES_packed_depth_stencil GL_OES_point_size_array GL_OES_point_sprite GL_OES_read_format GL_OES_rgb8_rgba8 GL_OES_stencil_wrap GL_OES_texture_cube_map GL_OES_texture_env_crossbar GL_OES_texture_float GL_OES_texture_half_float GL_OES_texture_half_float_linear GL_OES_texture_npot GL_OES_texture_mirrored_repeat GL_QCOM_binning_control GL_QCOM_extended_get GL_QCOM_tiled_rendering GL_AMD_compressed_3DC_texture
I/SurfaceFlinger( 108): GL_MAX_TEXTURE_SIZE = 4096
I/SurfaceFlinger( 108): GL_MAX_VIEWPORT_DIMS = 4096 x 4096
D/SurfaceFlinger( 108): Screen acquired, type=0 flinger=0x41e4e318
I/mediaserver( 110): ServiceManager: 0x41cf4dd0
I/AudioFlinger( 110): Using default 3000 mSec as standby time.
I/CameraService( 110): CameraService started (pid=110)
E/CameraService( 110): Could not load camera HAL module
I/AudioPolicyManagerBase( 110): loadAudioPolicyConfig() loaded /system/etc/audio_policy.conf
E/AudioHardwareQSD( 110): Cannot open /dev/audience_a1026 -1
I/HTC Acoustic( 110): libhtc_acoustic.so version 2.0.1.5
E/HTC Acoustic( 110): Fail to open /system/etc/AdieHWCodecSetting.csv -1.
E/HTC Acoustic( 110): read ADIE para from file failed -1
E/HTC Acoustic( 110): ioctl ACOUSTIC_UPDATE_ADIE failed -1
I/HTC Acoustic( 110): open /system/etc/AudioBTID.csv success.
I/HTC Acoustic( 110): BT ID table version: PASSION_HTC_20100610
E/HTC Acoustic( 110): Fail to open /system/etc/TPA2018.csv -1.
D/AudioHardwareQSD( 110): speaker amplifier tpa2018 is not supported
I/AudioHardwareQSD( 110): Set master volume to 1.000000
I/AudioFlinger( 110): loadHwModule() Loaded primary audio interface from LEGACY Audio HW HAL (audio) handle 1
I/AudioFlinger( 110): HAL output buffer size 768 frames, normal mix buffer size 1056 frames
I/AudioMixer( 110): found effect "Multichannel Downmix To Stereo" from The Android Open Source Project
E/MonoPipe( 110): Failed to fetch local time frequency when constructing a MonoPipe (res = -32). getNextWriteTimestamp calls will be non-functional
W/AudioFlinger( 110): Policy SCHED_FIFO priority 3 is unavailable for pid 110 tid 158; error -1
I/AudioFlinger( 110): Using module 1 has the primary audio interface
D/AudioHardwareInterface( 110): setMode(NORMAL)
I/AudioFlinger( 110): AudioFlinger's thread 0x41cf8890 ready to run
W/AudioFlinger( 110): Thread AudioOut_2 cannot connect to the power manager service
I/AudioHardwareQSD( 110): Routing audio to Speakerphone
D/AudioHardwareQSD( 110): Switching audio device to
D/AudioHardwareQSD( 110): Speakerphone
I/mir::ApplicationManager( 113): virtual bool android::InputSetup::DummyApplication::updateInfo()
I/mir::ApplicationManager( 113): virtual bool android::InputSetup::DummyApplicationWindow::updateInfo()
I/EventHub( 113): New device: id=1, fd=34, path='/dev/input/event6', name='curcial-oj', classes=0x9, configuration='/system/usr/idc/curcial-oj.idc', keyLayout='/system/usr/keylayout/Generic.kl', keyCharacterMap='/system/usr/keychars/Generic.kcm', builtinKeyboard=false, usingSuspendBlockIoctl=false, usingClockIoctl=false
D/EventHub( 113): No input device configuration file found for device 'lightsensor-level'.
D/EventHub( 113): No input device configuration file found for device 'bravo-keypad'.
I/EventHub( 113): New device: id=3, fd=35, path='/dev/input/event4', name='bravo-keypad', classes=0x1, configuration='', keyLayout='/system/usr/keylayout/bravo-keypad.kl', keyCharacterMap='/system/usr/keychars/bravo-keypad.kcm', builtinKeyboard=false, usingSuspendBlockIoctl=false, usingClockIoctl=false
D/EventHub( 113): No input device configuration file found for device 'proximity'.
I/EventHub( 113): New device: id=5, fd=36, path='/dev/input/event2', name='synaptics-rmi-touchscreen', classes=0x115, configuration='/system/usr/idc/synaptics-rmi-touchscreen.idc', keyLayout='/system/usr/keylayout/synaptics-rmi-touchscreen.kl', keyCharacterMap='/system/usr/keychars/synaptics-rmi-touchscreen.kcm', builtinKeyboard=false, usingSuspendBlockIoctl=false, usingClockIoctl=false
D/EventHub( 113): No input device configuration file found for device 'compass'.
D/EventHub( 113): No input device configuration file found for device 'h2w headset'.
I/EventHub( 113): New device: id=7, fd=37, path='/dev/input/event0', name='h2w headset', classes=0x1, configuration='', keyLayout='/system/usr/keylayout/h2w_headset.kl', keyCharacterMap='/system/usr/keychars/h2w_headset.kcm', builtinKeyboard=false, usingSuspendBlockIoctl=false, usingClockIoctl=false
I/InputReader( 113): Device added: id=-1, name='Virtual', sources=0x00000301
I/InputReader( 113): Device added: id=7, name='h2w headset', sources=0x00000101
I/InputReader( 113): Device reconfigured: id=5, name='synaptics-rmi-touchscreen', size 480x800, orientation 0, mode 1, display id 0
I/InputReader( 113): Device added: id=5, name='synaptics-rmi-touchscreen', sources=0x01001113
I/InputReader( 113): Device added: id=3, name='bravo-keypad', sources=0x00000101
I/InputReader( 113): Device added: id=1, name='curcial-oj', sources=0x00010105
I/AudioHardwareQSD( 110): voice volume 5 (range is 0 to 5)
D/AudioHardwareQSD( 110): Setting in-call volume to 100
E/AudioFlinger( 110): int android::load_audio_interface(char const*, audio_hw_device_t**) couldn't load audio hw module audio.a2dp (No such file or directory)
I/AudioFlinger( 110): loadHwModule() error -2 loading module a2dp
W/AudioPolicyManagerBase( 110): could not open HW module a2dp
I/AudioFlinger( 110): loadHwModule() Loaded usb audio interface from USB audio HW HAL (audio) handle 3
I/AudioPolicyService( 110): Loaded audio policy from LEGACY Audio Policy HAL (audio_policy)
D/SensorService( 112): nuSensorService starting...
E/SensorService( 112): couldn't load sensors module (No such file or directory)
Thanks
You're missing some modules, aa the logcat says. Maybe the download was corrupt or something.
yep
Having following the steps CORRECTLY, that is puting it to my ext4 partition, I can conclude it doesn't work. I was left with a blank screen, which i could turn on and off using the power button. That is all
I am porting to my device as well, and result in a blank screen. I also noticed in my log the line
no suitable EGLConfig found, trying without EGL_FRAMEBUFFER_TARGET_ANDROID
I compile a kernel from the CM 10.1 source for my N7108, but baseband unknown.and kernel version unavailable
Who can help me to solve this problem?please.
https://github.com/wctliu/Samsung-kernel-N7108/blob/master/adb-full-log.txt
a part of the log
Code:
--------- beginning of /dev/log/main
I/installd( 1856): installd firing up
I/DEBUG ( 1849): debuggerd: May 22 2013 02:49:39
--------- beginning of /dev/log/system
I/Vold ( 1846): Vold 2.1 (the revenge) firing up
D/Vold ( 1846): Volume sdcard1 state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 1846): Volume usbdisk0 state changing -1 (Initializing) -> 0 (No-Media)
I/Netd ( 1848): Netd 1.0 starting
W/InterfaceController( 1848): Error (Symbol not found: ) while searching for the interface command fini function
D/Vold ( 1846): Volume sdcard1 state changing 0 (No-Media) -> 2 (Pending)
D/macloader( 1859): Deleting file /data/.cid.info
D/DirectVolume( 1846): DirectVolume::handlePartitionAdded -> MAJOR 179, MINOR 49, PARTN 1
D/Vold ( 1846): Volume sdcard1 state changing 2 (Pending) -> 1 (Idle-Unmounted)
I/SurfaceFlinger( 1851): SurfaceFlinger is starting
I/SurfaceFlinger( 1851): use dithering
I/SurfaceFlinger( 1851): SurfaceFlinger's main thread ready to run. Initializing graphics H/W...
D/gpsd ( 1860): main()
D/gpsd ( 1860): argv[0] = '/system/bin/gpsd'
D/gpsd ( 1860): argv[1] = '-c'
D/gpsd ( 1860): argv[2] = '/system/etc/gps.xml'
D/gpsd ( 1860): onRilCustomConfig(Test for unsupported parameters, )
D/gpsd ( 1860): onRilCustomConfig(FactoryTestFilePath, /data/)
D/gpsd ( 1860): onRilCustomConfig(TISEnabled, true)
D/gpsd ( 1860): onRilCustomConfig(LPmode, false)
D/gpsd ( 1860): onRilCustomConfig(cp-cold-start, false)
D/gpsd ( 1860): onRilCustomConfig(cp-guard-time-sec, 1)
D/gpsd ( 1860): Create : called
I/gpsd ( 1860): RildClient : called
D/gpsd ( 1860): RildClientSamsung : called
I/gpsd ( 1860): start : called
D/gpsd ( 1860): onRegisterModules : called
I/gpsd ( 1860): RildClientModule : called
D/gpsd ( 1860): RildClientModuleFreqSync : called
I/gpsd ( 1860): RildClientModuleFreqSyncSamsung : called
D/gpsd ( 1860): registerModule : pModule = 0x130ad58
D/gpsd ( 1860): onRegisterModule : called
I/gpsd ( 1860): RildClientModule : called
D/gpsd ( 1860): RildClientModuleControlPlane : called
D/gpsd ( 1860): RildClientModuleControlPlaneSamsung : called
D/gpsd ( 1860): registerModule : pModule = 0x130ad80
D/gpsd ( 1860): onRegisterModule : called
D/gpsd ( 1860): onStart : called
D/gpsd ( 1860): SecRildClient : called
D/gpsd ( 1860): initialize : called
D/gpsd ( 1860): connect : called
I/gpsd ( 1860): connect: Connect_RILD failed. (4) Retry number : 0
D/libEGL ( 1851): loaded /system/lib/egl/libEGL_mali.so
D/libEGL ( 1851): loaded /system/lib/egl/libGLESv1_CM_mali.so
D/libEGL ( 1851): loaded /system/lib/egl/libGLESv2_mali.so
E/ ( 1851): Device driver API match
E/ ( 1851): Device driver API version: 17
E/ ( 1851): User space API version: 17
E/ ( 1851): mali: REVISION=Linux-r3p1-01rel1 BUILD_DATE=Mon May 6 11:20:56 KST 2013
I/gralloc ( 1851): using (fd=21)
I/gralloc ( 1851): id = s3cfb
I/gralloc ( 1851): xres = 720 px
I/gralloc ( 1851): yres = 1280 px
I/gralloc ( 1851): xres_virtual = 720 px
I/gralloc ( 1851): yres_virtual = 2560 px
I/gralloc ( 1851): bpp = 32
I/gralloc ( 1851): r = 16:8
I/gralloc ( 1851): g = 8:8
I/gralloc ( 1851): b = 0:8
I/gralloc ( 1851): width = 69 mm (265.043488 dpi)
I/gralloc ( 1851): height = 123 mm (264.325195 dpi)
I/gralloc ( 1851): refresh rate = 58.30 Hz
I/SurfaceFlinger( 1851): Using composer version 1.0
W/SurfaceFlinger( 1851): getting VSYNC period from fb HAL: 17152364
W/SurfaceFlinger( 1851): no suitable EGLConfig found, trying without EGL_FRAMEBUFFER_TARGET_ANDROID
E/Trace ( 1851): error opening trace file: No such file or directory (2)
W/SurfaceFlinger( 1851): WARNING: EventThread not started, ignoring vsync
I/SurfaceFlinger( 1851): EGL informations:
I/SurfaceFlinger( 1851): vendor : Android
I/SurfaceFlinger( 1851): version : 1.4 Android META-EGL
I/SurfaceFlinger( 1851): extensions: EGL_KHR_image EGL_KHR_image_base EGL_KHR_image_pixmap EGL_KHR_gl_texture_2D_image EGL_KHR_gl_texture_cubemap_image EGL_KHR_gl_renderbuffer_image EGL_KHR_fence_sync EGL_ANDROID_image_native_buffer
I/SurfaceFlinger( 1851): Client API: OpenGL_ES
I/SurfaceFlinger( 1851): EGLSurface: 8-8-8-8, config=0x60000014
I/SurfaceFlinger( 1851): OpenGL ES informations:
I/SurfaceFlinger( 1851): vendor : ARM
I/SurfaceFlinger( 1851): renderer : Mali-400 MP
I/SurfaceFlinger( 1851): version : OpenGL ES-CM 1.1
I/SurfaceFlinger( 1851): extensions: GL_EXT_debug_marker GL_OES_byte_coordinates GL_OES_fixed_point GL_OES_single_precision GL_OES_matrix_get GL_OES_read_format GL_OES_compressed_paletted_texture GL_OES_point_size_array GL_OES_point_sprite GL_OES_texture_npot GL_OES_query_matrix GL_OES_matrix_palette GL_OES_extended_matrix_palette GL_OES_compressed_ETC1_RGB8_texture GL_OES_EGL_image GL_OES_draw_texture GL_OES_depth_texture GL_OES_packed_depth_stencil GL_EXT_texture_format_BGRA8888 GL_OES_framebuffer_object GL_OES_stencil8 GL_OES_depth24 GL_ARM_rgba8 GL_OES_EGL_image_external GL_OES_EGL_sync GL_OES_rgb8_rgba8 GL_EXT_multisampled_render_to_texture GL_OES_texture_cube_map GL_EXT_discard_framebuffer GL_EXT_robustness
I/SurfaceFlinger( 1851): GL_MAX_TEXTURE_SIZE = 4096
I/SurfaceFlinger( 1851): GL_MAX_VIEWPORT_DIMS = 4096 x 4096
D/SurfaceFlinger( 1851): Screen acquired, type=0 flinger=0x408f8318
D/AndroidRuntime( 1852):
D/AndroidRuntime( 1852): >>>>>> AndroidRuntime START com.android.internal.os.ZygoteInit <<<<<<
D/AndroidRuntime( 1852): CheckJNI is OFF
D/libEGL ( 2069): loaded /system/lib/egl/libEGL_mali.so
D/libEGL ( 2069): loaded /system/lib/egl/libGLESv1_CM_mali.so
D/libEGL ( 2069): loaded /system/lib/egl/libGLESv2_mali.so
E/ ( 2069): Device driver API match
E/ ( 2069): Device driver API version: 17
E/ ( 2069): User space API version: 17
E/ ( 2069): mali: REVISION=Linux-r3p1-01rel1 BUILD_DATE=Mon May 6 11:20:56 KST 2013
E/Trace ( 2069): error opening trace file: No such file or directory (2)
I/mediaserver( 1855): ServiceManager: 0x40feae70
D/SecTVOutService( 1855): SecTVOutService instantiate
E/ ( 1855): fb_open: fb[0] open failed
E/ ( 1855): bool android::SecHdmi::create(int, int):Failed to open default FB
E/SecTVOutService( 1855): android::SecTVOutService::SecTVOutService()::mSecHdmi.create() fail
D/SecTVOutService( 1855): SecTVOutService r=0
I/AudioFlinger( 1855): Using default 3000 mSec as standby time.
I/CameraService( 1855): CameraService started (pid=1855)
V/CameraWrapper( 1855): camera_get_number_of_cameras
V/CameraWrapper( 1855): check_vendor_module
D/SecCameraHardware( 1855): LSIHAL int android::HAL_getNumberOfCameras()
I/AudioPolicyManagerBase( 1855): loadAudioPolicyConfig() loaded /system/etc/audio_policy.conf
E/Sensors ( 2231): Light old sensor_state 65, new sensor_state : 1 en : 0
I/PowerManagerService( 2231): Going to sleep due to screen timeout...
D/PermissionCache( 1851): checking android.permission.READ_FRAME_BUFFER for uid=1000 => granted (233 us)
I/keystore( 1857): uid: 1000 action: z -> 7 state: 3 -> 3 retry: 4
D/SurfaceFlinger( 1851): Screen released, type=0 flinger=0x408f8318
I/keystore( 1857): uid: 1000 action: z -> 7 state: 3 -> 3 retry: 4
I/WindowManager( 2231): Lock screen displayed!
I/keystore( 1857): uid: 1000 action: z -> 7 state: 3 -> 3 retry: 4
D/NfcService( 2426): NFC-C OFF
I/keystore( 1857): uid: 1000 action: z -> 7 state: 3 -> 3 retry: 4
E/Sensors ( 2231): Acc old sensor_state 1, new sensor_state : 0 en : 0
I/keystore( 1857): uid: 1000 action: z -> 7 state: 3 -> 3 retry: 4
I/keystore( 1857): uid: 1000 action: z -> 7 state: 3 -> 3 retry: 4
D/dalvikvm( 2231): GC_CONCURRENT freed 1657K, 20% free 11198K/13980K, paused 3ms+3ms, total 33ms
D/dalvikvm( 2231): WAIT_FOR_CONCURRENT_GC blocked 23ms
I/keystore( 1857): uid: 1000 action: z -> 7 state: 3 -> 3 retry: 4
I/keystore( 1857): uid: 1000 action: z -> 7 state: 3 -> 3 retry: 4
I/keystore( 1857): uid: 1000 action: z -> 7 state: 3 -> 3 retry: 4
D/dalvikvm( 2231): GC_FOR_ALLOC freed 527K, 14% free 12074K/13980K, paused 23ms, total 23ms
D/dalvikvm( 2231): GC_FOR_ALLOC freed 27K, 14% free 12605K/14532K, paused 21ms, total 21ms
D/dalvikvm( 2231): GC_FOR_ALLOC freed 11K, 13% free 13342K/15268K, paused 22ms, total 22ms
I/keystore( 1857): uid: 1000 action: z -> 7 state: 3 -> 3 retry: 4
D/dalvikvm( 2231): GC_FOR_ALLOC freed 34K, 12% free 14289K/16188K, paused 22ms, total 22ms
I/keystore( 1857): uid: 1000 action: z -> 7 state: 3 -> 3 retry: 4
I/keystore( 1857): uid: 1000 action: z -> 7 state: 3 -> 3 retry: 4
W/ThrottleService( 2231): unable to find stats for iface pdp0
W/SocketClient( 1848): write error (Broken pipe)
anyone? help me .thanks.
wctliu said:
anyone? help me .thanks.
Click to expand...
Click to collapse
1: be sure to had back-upped your EFS files
And i had this problem, and after days of ignorance of the community and self-research i decided to download the proprietary files from https://github.com/TheMuppets/ instead of extracting them myself and that did the trick.
thanks for your reply
how to back-upped EFS files ?
I tested many times, that this issue should be related with the kernel, rather than rom
wctliu said:
thanks for your reply
how to back-upped EFS files ?
I tested many times, that this issue should be related with the kernel, rather than rom
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1308546 loads of other topic on the case.
Mod move this out of developers board?
Factionwars said:
1: be sure to had back-upped your EFS files
And i had this problem, and after days of ignorance of the community and self-research i decided to download the proprietary files from https://github.com/TheMuppets/ instead of extracting them myself and that did the trick.
Click to expand...
Click to collapse
Factionwars said:
http://forum.xda-developers.com/showthread.php?t=1308546 loads of other topic on the case.
Mod move this out of developers board?
Click to expand...
Click to collapse
EFS should be independent of it.
When I was in exchange for the official kernel and rom. All normal.
Hi
Don't expect much, this is the first time I'm doing android porting
I'm trying to get Lollipop working on primou and I need some help by people with more experience.
Github: https://github.com/AndroidPrimou
Builds: https://www.dropbox.com/sh/jghm6m8imi0hzzf/AAB7suJFmzTAtX-1QaeJ4KHQa?dl=0
THIS IS A DEVELEOPENT THREAD, THE BUILDS ARE ONLY FOR DEVS!
Current status:
Booting, ram fills up and system crashs.
Last updated: 22-03-2015
That is really good news!!! it would be nice to have Lollipop on HTC ONE V!!! i dont want even code so i cant help you with coding but i can help with noob testing! ))
its too much work bro, leave it
I'll just try it cause I wanna know more about android, there are much cm12 7x30 drivers out there
What about primoc :laugh:
I need someone who knows about the internals of the graphics system, because I need to apply all the display changes in lollipop to the display driver.
Maybe this is a good place to start, but I don't have time to read this and I have no C/C++ skills at all.
cybervibin said:
its too much work bro, leave it
Click to expand...
Click to collapse
if everyone said this the Motorola defy wouldn't have 5.0.
Will it be for primoc? Can you make it work on both
Sorry, this will be for primou only (if it will work someday)
Hello,
Compeltely new user here, I've never done anything with Android ROM dev but I know C++ and I want to help to make this possible !
If you mind sharing what you did
Great Going.....
Keep doing your work and upload as soon as you get a build that boots.
Will definitely test it and send you the logcats.(if you need them)
Try to make sure that you get a working camera app unlike the Jb and KitKat PrimoU Roms
And Yes Many people out there still use HOV (PrimoU) as their primary device
adeen-s said:
Keep doing your work and upload as soon as you get a build that boots.
Will definitely test it and send you the logcats.(if you need them)
Try to make sure that you get a working camera app unlike the Jb and KitKat PrimoU Roms
And Yes Many people out there still use HOV (PrimoU) as their primary device
Click to expand...
Click to collapse
Every dev is welcome in #hov on freenode. We need people who have some experience with the display-hal.
i have another problem.
Code:
--------- beginning of main
I/lowmemorykiller( 1617): Using in-kernel low memory killer interface
W/auditd ( 1615): type=2000 audit(0.0:1): initialized
I/auditd ( 1615): type=1403 audit(0.0:2): policy loaded auid=4294967295 ses=4294967295
W/auditd ( 1615): type=1404 audit(0.0:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
--------- beginning of system
I/Vold ( 1620): Vold 2.1 (the revenge) firing up
D/Vold ( 1620): Volume sdcard0 state changing -1 (Initializing) -> 0 (No-Media)
I/Cryptfs ( 1620): Check if PFE is activated on Boot
E/Cryptfs ( 1620): Bad magic for real block device /dev/block/platform/msm_sdcc.2/by-num/p26
E/Cryptfs ( 1620): Error getting crypt footer and key
I/SurfaceFlinger( 1621): SurfaceFlinger is starting
I/SurfaceFlinger( 1621): SurfaceFlinger's main thread ready to run. Initializing graphics H/W...
D/libEGL ( 1621): loaded /system/lib/egl/libEGL_adreno200.so
D/libEGL ( 1621): loaded /system/lib/egl/libGLESv1_CM_adreno200.so
D/libEGL ( 1621): loaded /system/lib/egl/libGLESv2_adreno200.so
W/DirectVolume( 1620): Deprecated implied prefix pattern detected, please use '/devices/platform/msm_sdcc.4/mmc_host/mmc2*' instead
D/Vold ( 1620): Volume sdcard0 state changing 0 (No-Media) -> 2 (Pending)
D/DirectVolume( 1620): DirectVolume::handlePartitionAdded -> MAJOR 179, MINOR 65, PARTN 1
D/Vold ( 1620): Volume sdcard0 state changing 2 (Pending) -> 1 (Idle-Unmounted)
I/Adreno200-EGL( 1621): <qeglDrvAPI_eglInitialize:269>: EGL 1.4 QUALCOMM build: AU_LINUX_ANDROID_JB_VANILLA.04.02.02.60.051_msm8960_JB_VANILLA_CL2997615_release_AU (CL2997615)
I/Adreno200-EGL( 1621): Build Date: 04/11/13 Thu
I/Adreno200-EGL( 1621): Local Branch:
I/Adreno200-EGL( 1621): Remote Branch: quic/mako_jb_mr1
I/Adreno200-EGL( 1621): Local Patches: NONE
I/Adreno200-EGL( 1621): Reconstruct Branch: AU_LINUX_ANDROID_JB_VANILLA.04.02.02.60.051 + NOTHING
I/gralloc ( 1621): using (fd=13)
I/gralloc ( 1621): id = msmfb
I/gralloc ( 1621): xres = 480 px
I/gralloc ( 1621): yres = 800 px
I/gralloc ( 1621): xres_virtual = 480 px
I/gralloc ( 1621): yres_virtual = 2400 px
I/gralloc ( 1621): bpp = 32
I/gralloc ( 1621): r = 0:8
I/gralloc ( 1621): g = 8:8
I/gralloc ( 1621): b = 16:8
I/gralloc ( 1621): width = 52 mm (234.461533 dpi)
I/gralloc ( 1621): height = 88 mm (230.909088 dpi)
I/gralloc ( 1621): refresh rate = 0.00 Hz
D/CALCFPS ( 1621): DEBUG_CALC_FPS: 0
D/CALCFPS ( 1621): period: 10
D/CALCFPS ( 1621): ignorethresh_us: 500000
D/CALCFPS ( 1621): DEBUG_CALC_FPS: 0
D/CALCFPS ( 1621): period: 10
D/CALCFPS ( 1621): ignorethresh_us: 500000
E/SELinux ( 1618): avc: denied { add } for service=display.hwcservice scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:system_server_service:s0 tclass=service_manager
E/ServiceManager( 1618): add_service('display.hwcservice',1) uid=1000 - PERMISSION DENIED
I/Adreno200-C2D( 1621): <c2d_wrapper_init:126>: C2D2 initializing z180 version: libc2d2_z180.so
I/Adreno200-C2D( 1621): <c2d_wrapper_init:183>: C2D2 wrapper initialized successfully
I/hwcomposer( 1621): Initializing Qualcomm Hardware Composer
I/hwcomposer( 1621): MDP version: 0
I/hwcomposer( 1621): DYN composition threshold : 2.000000
I/hwcomposer( 1621): hwc_device_open: Faking Hardware VSYNC
I/SurfaceFlinger( 1621): Using composer version 1.0
I/hwcomposer( 1621): Initializing UEvent Listener Thread
I/hwcomposer( 1621): Initializing VSYNC Thread
I/SurfaceFlinger( 1621): EGL information:
I/SurfaceFlinger( 1621): vendor : Android
I/SurfaceFlinger( 1621): version : 1.4 Android META-EGL
I/SurfaceFlinger( 1621): extensions: EGL_KHR_get_all_proc_addresses EGL_ANDROID_presentation_time EGL_KHR_image EGL_KHR_image_base EGL_KHR_lock_surface EGL_KHR_gl_texture_2D_image EGL_KHR_gl_texture_cubemap_image EGL_KHR_gl_renderbuffer_image EGL_KHR_fence_sync EGL_EXT_create_context_robustness EGL_ANDROID_image_native_buffer EGL_ANDROID_recordable
I/SurfaceFlinger( 1621): Client API: OpenGL_ES
I/SurfaceFlinger( 1621): EGLSurface: 8-8-8-8, config=0x4
I/SurfaceFlinger( 1621): OpenGL ES informations:
I/SurfaceFlinger( 1621): vendor : Qualcomm
I/SurfaceFlinger( 1621): renderer : Adreno (TM) 205
I/SurfaceFlinger( 1621): version : OpenGL ES 2.0 [email protected] [email protected] ([email protected])
I/SurfaceFlinger( 1621): extensions: GL_EXT_debug_marker GL_AMD_compressed_ATC_texture GL_AMD_performance_monitor GL_AMD_program_binary_Z400 GL_EXT_robustness GL_EXT_texture_format_BGRA8888 GL_EXT_texture_type_2_10_10_10_REV GL_NV_fence GL_OES_compressed_ETC1_RGB8_texture GL_OES_depth_texture GL_OES_depth24 GL_OES_EGL_image GL_OES_EGL_image_external GL_OES_element_index_uint GL_OES_fbo_render_mipmap GL_OES_fragment_precision_high GL_OES_get_program_binary GL_OES_packed_depth_stencil GL_OES_rgb8_rgba8 GL_OES_standard_derivatives GL_OES_texture_3D GL_OES_texture_float GL_OES_texture_half_float GL_OES_texture_half_float_linear GL_OES_texture_npot GL_OES_vertex_half_float GL_OES_vertex_type_10_10_10_2 GL_OES_vertex_array_object GL_QCOM_alpha_test GL_QCOM_binning_control GL_QCOM_driver_control GL_QCOM_perfmon_global_mode GL_QCOM_extended_get GL_QCOM_extended_get2 GL_QCOM_tiled_rendering GL_QCOM_writeonly_rendering GL_AMD_compressed_3DC_texture GL_EXT_texture_filter_anisotropic
I/SurfaceFlinger( 1621): GL_MAX_TEXTURE_SIZE = 4096
I/SurfaceFlinger( 1621): GL_MAX_VIEWPORT_DIMS = 4096
E/cutils-trace( 1621): Error opening trace file: No such file or directory (2)
D/SurfaceFlinger( 1621): Set power mode=2, type=0 flinger=0x40662000
D/libEGL ( 1712): loaded /system/lib/egl/libEGL_adreno200.so
D/libEGL ( 1712): loaded /system/lib/egl/libGLESv1_CM_adreno200.so
D/libEGL ( 1712): loaded /system/lib/egl/libGLESv2_adreno200.so
W/BootAnimation( 1715): type=1400 audit(0.0:4): avc: denied { search } for name="tmp" dev=mmcblk0p26 ino=34 scontext=u:r:bootanim:s0 tcontext=u:object_r:shell_data_file:s0 tclass=dir
W/BootAnimation( 1715): type=1400 audit(0.0:5): avc: denied { search } for name="tmp" dev=mmcblk0p26 ino=34 scontext=u:r:bootanim:s0 tcontext=u:object_r:shell_data_file:s0 tclass=dir
I/Adreno200-EGL( 1712): <qeglDrvAPI_eglInitialize:269>: EGL 1.4 QUALCOMM build: AU_LINUX_ANDROID_JB_VANILLA.04.02.02.60.051_msm8960_JB_VANILLA_CL2997615_release_AU (CL2997615)
I/Adreno200-EGL( 1712): Build Date: 04/11/13 Thu
I/Adreno200-EGL( 1712): Local Branch:
I/Adreno200-EGL( 1712): Remote Branch: quic/mako_jb_mr1
I/Adreno200-EGL( 1712): Local Patches: NONE
I/Adreno200-EGL( 1712): Reconstruct Branch: AU_LINUX_ANDROID_JB_VANILLA.04.02.02.60.051 + NOTHING
E/cutils-trace( 1712): Error opening trace file: No such file or directory (2)
E/BootAnimation( 1712): couldn't find audio_conf.txt
W/Binder_2( 1637): type=1400 audit(0.0:6): avc: denied { read write } for name="genlock" dev=tmpfs ino=1084 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:device:s0 tclass=chr_file
E/libgenlock( 1621): genlock_create_lock: open genlock device failed (err=Permission denied)
E/gralloc ( 1621): alloc_impl: genlock_create_lock failed
E/gralloc ( 1621): terminateBuffer: unmapping a non pmem/ashmem buffer flags = 0x0
E/memalloc( 1621): getAllocator: Invalid flags passed: 0x0
E/gralloc ( 1621): Could not unmap memory at address 0x40601d60
E/memalloc( 1621): getAllocator: Invalid flags passed: 0x0
--------- beginning of crash
F/libc ( 1621): Fatal signal 11 (SIGSEGV), code 1, fault addr 0x0 in tid 1637 (Binder_2)
F/libc ( 1621): Unable to open connection to debuggerd: Connection refused
I/ServiceManager( 1618): service 'SurfaceFlinger' died
W/SurfaceComposerClient( 1712): ComposerService remote (surfaceflinger) died [0x40c591c0]
D/BootAnimation( 1712): SurfaceFlinger died, exiting...
Code:
W/Binder_2( 1637): type=1400 audit(0.0:6): avc: denied { read write } for name="genlock" dev=tmpfs ino=1084 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:device:s0 tclass=chr_file
E/libgenlock( 1621): genlock_create_lock: open genlock device failed (err=Permission denied)
E/gralloc ( 1621): alloc_impl: genlock_create_lock failed
It looks like Selinux is denying to open a genlock device and gralloc fails.
Try to set selinux into permissive mode with this kernel command line: androidboot.selinux=permissive
By the way, which display hal sources are you using? The display-legacy by evervolv?
yes. but i use
display-caf/msm7x30
audio-caf/msm7x30
media-caf/msm7x30
this is cm12 format
Yes I know.
But what github sources are you using?
That one: https://github.com/Evervolv/android_hardware_qcom_display-legacy/tree/lollipop
Or that one: https://github.com/LegacyXperia/android_hardware_qcom_display
Or another one?
first. Evervolve.
rastomanchik said:
first. Evervolve.
Click to expand...
Click to collapse
This one doesn't build for me.
surfaceflinger is missing some things in hardwarecomposer.
Hello,
a while ago, I started having an issue with my s4 mini (serranolte).
Basically, the screen turns itself on very often. For example, I press the power button to turn it off and after a second or so it turns itself on, stays on for ~10 seconds, turns off due to screen timeout, turns on by itself and so on.
I tried both with Lineage OS 14.1 and crDroid v4.4 (android 8.1) and the issue persists.
Here's a copy of the logcat taken while this happens:
Code:
07-15 12:49:42.350 531 634 I PowerManagerService: Going to sleep due to power button (uid 1000)...
07-15 12:49:42.377 531 558 W Adreno-EGL: <qeglDrvAPI_eglGetConfigAttrib:607>: EGL_BAD_ATTRIBUTE
07-15 12:49:42.378 531 558 D vndksupport: Loading /vendor/lib/hw/gralloc.msm8960.so from current namespace instead of sphal namespace.
07-15 12:49:42.384 531 558 W Adreno-EGL: <qeglDrvAPI_eglQueryContext:4373>: EGL_BAD_ATTRIBUTE
07-15 12:49:42.827 531 558 I DisplayPowerController: Blocking screen off
07-15 12:49:42.827 531 558 I DisplayPowerController: Unblocked screen off after 0 ms
07-15 12:49:42.827 531 558 D Sensors : activate: acc_enable=0, mag_enable=0
07-15 12:49:42.827 531 558 D Sensors : activate: handle=0, enabled=0
07-15 12:49:42.843 531 558 D Sensors : activate: acc_enable=0, mag_enable=0
07-15 12:49:42.843 531 558 D Sensors : activate: handle=4, enabled=0
07-15 12:49:42.843 531 558 D Sensors : LightSensor enable = 0
07-15 12:49:42.843 531 558 D Sensors : LightSensor enableSensor = 0
07-15 12:49:42.857 531 556 I DisplayManagerService: Display device changed state: "Built-in Screen", OFF
07-15 12:49:42.858 241 241 D SurfaceFlinger: Set power mode=0, type=0 flinger=0xb364e000
07-15 12:49:42.861 241 241 D qdhwcomposer: hwc_setPowerMode: Setting mode 0 on display: 0
07-15 12:49:42.871 1148 1148 D StatusBar: disable<e i a s b H R c s q >
07-15 12:49:42.871 1148 1148 D StatusBar: disable<e i a s b H R c s q >
07-15 12:49:42.879 531 634 I InputReader: Reconfiguring input devices. changes=0x00000004
07-15 12:49:42.918 531 634 I PowerManagerService: Waking up from dozing (uid=1000 reason=android.policy:KEY)...
07-15 12:49:42.922 531 558 I DisplayPowerController: Blocking screen on until initial contents have been drawn.
07-15 12:49:42.923 531 558 D Sensors : setDelay: acc_delay=66667000, mag_delay=200000000
07-15 12:49:42.923 531 558 D Sensors : setDelay: handle=4, delay=250000000
07-15 12:49:42.923 531 558 D Sensors : LightSensor setDelay = 250000000
07-15 12:49:42.923 531 558 D Sensors : LightSensor setSensorDelay = 250000000
07-15 12:49:42.923 531 558 D Sensors : activate: acc_enable=0, mag_enable=0
07-15 12:49:42.923 531 558 D Sensors : activate: handle=4, enabled=1
07-15 12:49:42.923 531 558 D Sensors : LightSensor enable = 1
07-15 12:49:42.923 531 558 D Sensors : LightSensor enableSensor = 1
07-15 12:49:42.927 289 289 D audio_hw_primary: adev_set_parameters: enter: screen_state=off
07-15 12:49:42.942 1148 1148 D StatusBar: disable<e i a s b H R c s q >
07-15 12:49:42.942 1148 1148 D StatusBar: disable<e i a s b H R c s q >
07-15 12:49:42.964 1148 1148 D StatusBar: disable<e i a s b H R c s q >
07-15 12:49:42.979 1148 1148 I chatty : uid=10030(com.android.systemui) identical 2 lines
07-15 12:49:42.979 1148 1148 D StatusBar: disable<e i a s b H R c s q >
07-15 12:49:43.019 531 615 D Sensors : LightSensor readEvents x = 37.000000, raw = 37
07-15 12:49:43.020 531 558 D Sensors : activate: acc_enable=0, mag_enable=0
07-15 12:49:43.020 531 558 D Sensors : activate: handle=4, enabled=0
07-15 12:49:43.020 531 558 D Sensors : LightSensor enable = 0
07-15 12:49:43.020 531 558 D Sensors : LightSensor enableSensor = 0
07-15 12:49:43.021 531 558 D Sensors : setDelay: acc_delay=66667000, mag_delay=200000000
07-15 12:49:43.021 531 558 D Sensors : setDelay: handle=4, delay=1000000000
07-15 12:49:43.021 531 558 D Sensors : LightSensor setDelay = 1000000000
07-15 12:49:43.021 531 558 D Sensors : LightSensor setSensorDelay = 1000000000
07-15 12:49:43.021 531 558 D Sensors : activate: acc_enable=0, mag_enable=0
07-15 12:49:43.021 531 558 D Sensors : activate: handle=4, enabled=1
07-15 12:49:43.021 531 558 D Sensors : LightSensor enable = 1
07-15 12:49:43.022 531 558 D Sensors : LightSensor enableSensor = 1
07-15 12:49:43.120 531 615 D Sensors : LightSensor readEvents x = 39.000000, raw = 39
07-15 12:49:43.335 241 241 D qdhwcomposer: hwc_setPowerMode: Done setting mode 0 on display 0
07-15 12:49:43.344 531 1105 D SurfaceControl: Excessive delay in setPowerMode()
07-15 12:49:43.345 531 556 I DisplayManagerService: Display device changed state: "Built-in Screen", ON
07-15 12:49:43.363 531 634 I InputReader: Reconfiguring input devices. changes=0x00000004
07-15 12:49:43.368 241 241 D SurfaceFlinger: Set power mode=2, type=0 flinger=0xb364e000
07-15 12:49:43.368 241 241 D qdhwcomposer: hwc_setPowerMode: Setting mode 2 on display: 0
07-15 12:49:43.981 531 556 W WindowManager: Timeout waiting for drawn: undrawn=[Window{afd67f u0 StatusBar}]
07-15 12:49:43.983 531 549 D Sensors : setDelay: acc_delay=66667000, mag_delay=200000000
07-15 12:49:43.983 531 549 D Sensors : setDelay: handle=0, delay=66667000
07-15 12:49:43.984 531 549 D Sensors : activate: acc_enable=1, mag_enable=0
07-15 12:49:43.984 531 549 D Sensors : activate: handle=0, enabled=1
07-15 12:49:44.054 241 241 D qdhwcomposer: hwc_setPowerMode: Done setting mode 2 on display 0
07-15 12:49:44.055 531 558 I DisplayPowerController: Unblocked screen on after 1133 ms
07-15 12:49:44.063 531 1105 D SurfaceControl: Excessive delay in setPowerMode()
07-15 12:49:44.079 531 558 W PowerManagerService: Screen on took 1160 ms
07-15 12:49:44.081 1148 1148 I Choreographer: Skipped 63 frames! The application may be doing too much work on its main thread.
07-15 12:49:44.120 531 615 D Sensors : LightSensor readEvents x = 35.000000, raw = 35
07-15 12:49:44.132 289 389 D audio_hw_primary: adev_set_parameters: enter: screen_state=on
Hoping someone can help
Ask me if you need to know anything else, I really hope this isn't an hardware issue...
Thanks, have a nice day
I've also tried flashing an older ROM, Pacman ROM (android 4.3) and I get the same issue.
This leads me to think it is an hardware related issue. Here's the Sensors output:
Code:
D/Sensors ( 836): activate: acc_enable=1, mag_enable=0
D/Sensors ( 836): activate: handle=4, enabled=0
D/Sensors ( 836): LightSensor enable = 0
D/Sensors ( 836): LightSensor enableSensor = 0
D/Sensors ( 836): setDelay: acc_delay=66667000, mag_delay=200000000
D/Sensors ( 836): setDelay: handle=4, delay=1000000000
D/Sensors ( 836): LightSensor setDelay = 1000000000
D/Sensors ( 836): LightSensor setSensorDelay = 1000000000
D/Sensors ( 836): activate: acc_enable=0, mag_enable=0
D/Sensors ( 836): activate: handle=0, enabled=0
D/Sensors ( 836): setDelay: acc_delay=66667000, mag_delay=200000000
D/Sensors ( 836): setDelay: handle=0, delay=66667000
D/Sensors ( 836): activate: acc_enable=1, mag_enable=0
D/Sensors ( 836): activate: handle=0, enabled=1
D/Sensors ( 836): setDelay: acc_delay=200000000, mag_delay=200000000
D/Sensors ( 836): setDelay: handle=0, delay=200000000
D/Sensors ( 836): setDelay: acc_delay=66667000, mag_delay=200000000
D/Sensors ( 836): setDelay: handle=0, delay=66667000
D/Sensors ( 836): activate: acc_enable=1, mag_enable=0
D/Sensors ( 836): activate: handle=4, enabled=1
D/Sensors ( 836): LightSensor enable = 1
D/Sensors ( 836): LightSensor enableSensor = 1
D/Sensors ( 836): setDelay: acc_delay=66667000, mag_delay=200000000
D/Sensors ( 836): setDelay: handle=4, delay=200000000
D/Sensors ( 836): LightSensor setDelay = 200000000
D/Sensors ( 836): LightSensor setSensorDelay = 200000000
D/Sensors ( 836): setDelay: acc_delay=66667000, mag_delay=200000000
D/Sensors ( 836): setDelay: handle=4, delay=1000000000
D/Sensors ( 836): LightSensor setDelay = 1000000000
D/Sensors ( 836): LightSensor setSensorDelay = 1000000000
If you know of anything that could solve this, please let me know. Thanks.
Hello there,
I have a problem in hands with my Lenovo P2.
So... my screen is broken and I have removed it (yes, my Lenovo does not have a screen right now), but now I'm not able to boot into a freshly flashed Android because the system is trying to connect to the HW (or it seems to be that...) and I don't have a working one.
adb logcat spits this out repeatedly:
Code:
02-14 15:35:37.405 1345 1345 D vndksupport: Loading /vendor/lib64/hw/gralloc.msm8953.so from current namespace instead of sphal namespace.
02-14 15:35:37.406 1345 1345 I SDM : ExtensionInterface::CreateExtensionInterface:
02-14 15:35:37.406 1345 1345 I SDM : SDM-EXTENSION Version: Date: 08/21/18, Commit: bfe6fd2, Change: I8d4aa219cb
02-14 15:35:37.406 1345 1345 I SDM : HWInfo::GetHWResourceInfo: SDE Version = 5, SDE Revision = 10100000, RGB = 2, VIG = 1, DMA = 1, Cursor = 1
02-14 15:35:37.406 1345 1345 I SDM : HWInfo::GetHWResourceInfo: Upscale Ratio = 20, Downscale Ratio = 4, Blending Stages = 4
02-14 15:35:37.406 1345 1345 I SDM : HWInfo::GetHWResourceInfo: SourceSplit = 0 QSEED3 = 0
02-14 15:35:37.406 1345 1345 I SDM : HWInfo::GetHWResourceInfo: BWC = 0, UBWC = 1, Decimation = 1, Tile Format = 0 Concurrent Writeback = 0
02-14 15:35:37.406 1345 1345 I SDM : HWInfo::GetHWResourceInfo: MaxLowBw = 3400000 , MaxHighBw = 3400000
02-14 15:35:37.407 1345 1345 I SDM : HWInfo::GetHWResourceInfo: MaxPipeBw = 2300000 KBps, MaxSDEClock = 400000000 Hz, ClockFudgeFactor = 1.050000
02-14 15:35:37.407 1345 1345 I SDM : HWInfo::GetHWResourceInfo: Prefill factors: Tiled_NV12 = 8, Tiled = 4, Linear = 1, Scale = 1, Fudge_factor = 2
02-14 15:35:37.407 1345 1345 I SDM : HWInfo::GetMDSSRotatorInfo: MDSS Rotator: Count = 1, Downscale = 1, Min_downscale = 2.000000
02-14 15:35:37.407 1345 1345 I SDM : HWInfo::GetHWResourceInfo: Has Support for multiple bw limits shown below
02-14 15:35:37.407 1345 1345 I SDM : HWInfo::GetHWResourceInfo: Mode-index=0 total_bw_limit=3400000 and pipe_bw_limit=2300000
02-14 15:35:37.407 1345 1345 I SDM : HWInfo::GetHWResourceInfo: Mode-index=1 total_bw_limit=3100000 and pipe_bw_limit=2300000
02-14 15:35:37.407 1345 1345 I SDM : HWInfo::GetHWResourceInfo: Mode-index=2 total_bw_limit=3400000 and pipe_bw_limit=2300000
02-14 15:35:37.407 1345 1345 I SDM : HWInfo::GetHWResourceInfo: Mode-index=3 total_bw_limit=3400000 and pipe_bw_limit=2300000
02-14 15:35:37.407 1345 1345 I SDM : SessionManager::SessionManager: Allocate buffers synchronously = 0
02-14 15:35:37.408 514 514 W ServiceManagement: Waited one second for [email protected]::IComposer/default. Waiting another...
02-14 15:35:37.408 1345 1345 I SDM : CoreInterface::CreateCore: Open interface handle = 0x7700655000
02-14 15:35:37.408 1345 1345 I SDM : HWCSession::Register: Set uevent listener = 0x770064b200
02-14 15:35:37.408 1345 1345 I SDM : HWInfo::GetFirstDisplayInterfaceType: First display is internal display
02-14 15:35:37.409 1345 1345 I SDM : CPUHint::Init: Invalid CPU Hint Pre-enable Window -1
02-14 15:35:37.409 1345 1345 I SDM : HWDevice::GetHWPanelMaxBrightnessFromNode: Max brightness level = 255
02-14 15:35:37.409 1345 1345 W SDM : HWDevice::GetHWPanelInfoByNode: Failed to open msm_fb_panel_info node device node 1
02-14 15:35:37.409 1345 1345 W SDM : HWDevice::GetHWPanelInfoByNode: Failed to open msm_fb_panel_info node device node 2
02-14 15:35:37.409 1345 1345 W SDM : HWDevice::GetHWPanelInfoByNode: Failed to open msm_fb_panel_info node device node 3
02-14 15:35:37.409 1345 1345 E SDM : HWDevice::Init: device type = 0 should be present
02-14 15:35:37.409 1345 1345 E SDM : HWInterface::Create: Init on HW Intf type 0 failed
02-14 15:35:37.409 1345 1345 E SDM : HWCDisplay::Init: Display create failed. Error = 11 display_type 0 event_handler 0x77006a7000 disp_intf 0x77006a7040
02-14 15:35:37.410 1345 1345 I SDM : HWCColorManager::CreateColorManager: Successfully loaded libsdm-disp-vndapis.so
02-14 15:35:37.411 1345 1345 I SDM : HWCColorManager::CreateColorManager: Successfully loaded libsdm-disp-vndapis.so and libsdm-diag.so and diag_init'ed
02-14 15:35:37.411 1345 1345 I SDM : HWCSession::Register: Set uevent listener = 0x0
02-14 15:35:37.411 1345 1345 I SDM : CoreInterface::DestroyCore: Close handle
02-14 15:35:37.412 1345 1345 E ComposerHal: failed to open hwcomposer device: Invalid argument
02-14 15:35:37.412 1345 1345 E [email protected]: Could not get passthrough implementation for [email protected]::IComposer/default.
02-14 15:35:37.415 446 446 I VendorServiceManager: service 'display.qservice' died
02-14 15:35:37.495 1231 1257 I ServiceManager: Waiting for service 'SurfaceFlinger' on '/dev/binder'...
02-14 15:35:37.595 1231 1257 I chatty : uid=1000(system) android.display identical 1 line
02-14 15:35:37.695 1231 1257 I ServiceManager: Waiting for service 'SurfaceFlinger' on '/dev/binder'...
02-14 15:35:37.786 500 535 E ANDR-PERF-MPCTL: First Boot check over.Going to 2nd Boot check.
02-14 15:35:37.795 1231 1257 I ServiceManager: Waiting for service 'SurfaceFlinger' on '/dev/binder'...
02-14 15:35:37.996 1231 1257 I chatty : uid=1000(system) android.display identical 2 lines
02-14 15:35:38.096 1231 1257 I ServiceManager: Waiting for service 'SurfaceFlinger' on '/dev/binder'...
02-14 15:35:38.196 1231 1257 W ServiceManager: Service SurfaceFlinger didn't start. Returning NULL
02-14 15:35:38.409 514 514 W ServiceManagement: Waited one second for [email protected]::IComposer/default. Waiting another...
02-14 15:35:38.446 1231 1257 I ServiceManager: Waiting for service 'SurfaceFlinger' on '/dev/binder'...
02-14 15:35:38.504 1352 1352 W mm-pp-dpps: type=1400 audit(0.0:593): avc: granted { read } for uid=1000 name="vndbinder" dev="tmpfs" ino=15735 scontext=u:r:init:s0 tcontext=u:object_r:vndbinder_device:s0 tclass=chr_file
02-14 15:35:38.522 1352 1352 I Dpps : GetInstance: DppsServer ref count increased to 1
02-14 15:35:38.504 1352 1352 W mm-pp-dpps: type=1400 audit(0.0:594): avc: granted { read } for uid=1000 name="vndbinder" dev="tmpfs" ino=15735 scontext=u:r:init:s0 tcontext=u:object_r:vndbinder_device:s0 tclass=chr_file
02-14 15:35:38.504 1352 1352 W mm-pp-dpps: type=1400 audit(0.0:595): avc: granted { read open } for uid=1000 path="/dev/vndbinder" dev="tmpfs" ino=15735 scontext=u:r:init:s0 tcontext=u:object_r:vndbinder_device:s0 tclass=chr_file
02-14 15:35:38.504 1352 1352 W mm-pp-dpps: type=1400 audit(0.0:596): avc: granted { read } for uid=1000 path="/dev/vndbinder" dev="tmpfs" ino=15735 scontext=u:r:init:s0 tcontext=u:object_r:vndbinder_device:s0 tclass=chr_file
02-14 15:35:38.522 1352 1352 E Dpps : GetPanelName():551 GetPanelName: panel-name not found
02-14 15:35:38.522 1352 1352 E Dpps : GetPanelInfoByNode():601 Failed to get panel type info, ret -22
02-14 15:35:38.522 1352 1352 E Dpps : GetFBNodeIndex():640 Unable to get panel info for node index 0, ret -22
02-14 15:35:38.522 1352 1352 E Dpps : InitDisplayHardware():258 Unable to get fb node index (-1), display type 0, ret -22
02-14 15:35:38.522 1352 1352 E Dpps : Init():169 Failed to setup display hardware, ret = -22
02-14 15:35:38.522 1352 1352 E Dpps : main():32 Failed to initialize DPPS, ret = -22
02-14 15:35:38.522 1352 1352 I Dpps : DeleteInstance: DppsServer ref count decreased to 0
02-14 15:35:38.522 1352 1352 I Dpps : DeleteInstance: Deleting DppsServer instance
02-14 15:35:38.546 1231 1257 I ServiceManager: Waiting for service 'SurfaceFlinger' on '/dev/binder'...
02-14 15:35:39.247 1231 1257 I chatty : uid=1000(system) android.display identical 7 lines
02-14 15:35:39.347 1231 1257 I ServiceManager: Waiting for service 'SurfaceFlinger' on '/dev/binder'...
02-14 15:35:39.409 514 514 W ServiceManagement: Waited one second for [email protected]::IComposer/default. Waiting another...
02-14 15:35:39.448 1231 1257 I ServiceManager: Waiting for service 'SurfaceFlinger' on '/dev/binder'...
02-14 15:35:40.249 1231 1257 I chatty : uid=1000(system) android.display identical 8 lines
02-14 15:35:40.349 1231 1257 I ServiceManager: Waiting for service 'SurfaceFlinger' on '/dev/binder'...
02-14 15:35:40.409 514 514 W ServiceManagement: Waited one second for [email protected]::IComposer/default. Waiting another...
Which means the mobile does not boot up, and in turn I'm not able to use scrcpy or other tool that allows me to control the screen via PC.
Is there anyway I can bypass this Display initialization or to output the display renderization to a virtual framebuffer easily?
Any other thoughts on this issue are welcome, as well as other possible solutions to
this case.
Thank you so much in advandce!
Best regards!
It might be a bit barbaric of me but maybe you should just replace the display ;s