Related
Hey guys, im new to the scene, and while fiddling around with my Galaxy S3, i have managed to brick it! Here is what happened.
I rooted the phone using a tutorial from here:
http://galaxys3root.com/galaxy-s3-r...gh-t999sgh-i747sph-l710-fail-proofnoob-proof/
Everything worked fine and the phone successfully rooted. But than i came across roms ... and i found a tutorial that told me how to install CyanogenMod 9:
http://forum.xda-developers.com/showthread.php?t=1778165
I tried to follow the instructions, but i would get (Error 7), and i realized that this tutorial instructed me to install the ClockworkMod Recovery version 5.8.4.7. So i downloaded the file from ClockworkMod's website, and it was in a .img format. When i had rooted my phone and installed ClockworkMod i used a .tar version via Odin, and this time i had a .img. After going through many tutorials, i found someone that showed how to install the .img varient via Android Terminal Emulator. So i followed the instructions:
http://forum.xda-developers.com/showthread.php?t=1363132
After i was finished following the instructions i rebooted the phone. And boom, it would not turn on. I tried all variants of holding the external buttons etc. Than i plugged the phone into a Windows PC. and the phone shows up in device manager as "QHSUSB DLOAD". So after tirelessly researching, i finally found the drivers for this and installed them. And know the phone shows up in Odin as COM10 in yellow. So i tried to flash the stock Image. I fire up Odin, select PDA, than the stock image, and click start. This is all that happens in the "Message Log":
<ID:0/010> Added!!
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
(I have attached a screenshot of the above)
Please guys, i just got the phone and now it is bricked, any help would be greatly appreciated. Thanks!!
First download the correct version of Odin and drivers for s3's here ;
http://forum.xda-developers.com/showthread.php?t=1722686
Then download and flash the full stock rom from here;
http://forum.xda-developers.com/showthread.php?t=1752729
Hopefully that will get your phone to boot.
Then once you have reapplied the rooted system image download "rom manager" from the market and flash the updated recovery from there to avoid the error you encountered when attempting to flash cm9.
Good luck!
Hi, Thanks for your reply. I tried using a "Jig" and it did not put the S3 into download mode. LIke i said previously. When the S3 is connected to my PC it shows up as "QHSUSB DLOAD". And no Samsung drivers would work with it. I had to research and find the drivers that finally worked and allowed Odin v1.85 to see the phone as "COM10", and i select the ROM under the PDA and click the "Start" button. But than it does not go past SetupConnection. I thought maybe the "Jig" was faulty and didnt work, but i tested it with another working Samsung Galaxy S2, and it worked exactly as it was supposed to. Should i still try your suggestion or is it pointless?
neubauej said:
First download the correct version of Odin and drivers for s3's here ;
http://forum.xda-developers.com/showthread.php?t=1722686
Then download and flash the full stock rom from here;
http://forum.xda-developers.com/showthread.php?t=1752729
Hopefully that will get your phone to boot.
Then once you have reapplied the rooted system image download "rom manager" from the market and flash the updated recovery from there to avoid the error you encountered when attempting to flash cm9.
Good luck!
Click to expand...
Click to collapse
Ouch.
It sounds like your bootloaders might be borked, so kinda pointless.
I would get ahold of Josh at www.mobiletechvideos.com as it sounds like jtag might be required.
Hey, Thanks for the info. But the image i flashed via the Android mobile terminal app on the phone, i was flashing a ClockworkMod v5.4.8.1, that was made for the AT&T i747 (I have the Bell i747M, which i am told is the same thing?) , is that the bootloader? I know someone here that is local that does the jTag repair. But im not sure if the problem i have is in relation to the bootloader. Please let me know. As the phone still does show up when connected to the PC.
neubauej said:
Ouch.
It sounds like your bootloaders might be borked, so kinda pointless.
Get ahold of Josh at as it sounds like jtag might be required.
Click to expand...
Click to collapse
I tried your solution. The phone when connected to the PC with does not show up in Odin 3.07 (Correct version for my phone, from your link), But if i turn on Odin 1.85, the phone shows up fine in that as COM10 in yellow. So does my phone need a jTag? Samsung Canada told me to send the phone in for service and they will reset it and send it back. At the moment the phone does not turn on or go into download mode, and when connected to the computer it shows up as HS-USB QDLoader. So my question is: If i send it to Samsung, will they discover that i have Rooted it and void my warranty and not fix the phone?
neubauej said:
First download the correct version of Odin and drivers for s3's here ;
http://forum.xda-developers.com/showthread.php?t=1722686
Then download and flash the full stock rom from here;
http://forum.xda-developers.com/showthread.php?t=1752729
Hopefully that will get your phone to boot.
Then once you have reapplied the rooted system image download "rom manager" from the market and flash the updated recovery from there to avoid the error you encountered when attempting to flash cm9.
Good luck!
Click to expand...
Click to collapse
If you send it to Samsung its unlikely they will notice or care that its rooted.
I have sent them 2 devices that I wanted them to reflash after I did stupid things and hardbricked, fully expecting to pay for it, and it was returned to me flashed and at no charge. This was after I told the customer service rep that I was flashing custom firmware and i screwed it up.
YMMV.
The worst case scenario there is they void your warranty and charge you a minimal fee to reflash it.
As for your bootloaders, you pushed a custom recovery that failed, corrupted, or was an incorrect application. The recovery lies in the bootloader..
If it doesn't power up, won't go into download mode, and Odin won't flash it I'd say its jtag or send it to sammy time.
I see, well i do not care if they charge me anything. Money is not an issue, Ok well i just got the email from Samsung with the shipping label. Thanks for your information.
neubauej said:
If you send it to Samsung its unlikely they will notice or care that its rooted.
I have sent them 2 devices that I wanted them to reflash after I did stupid things and hardbricked, fully expecting to pay for it, and it was returned to me flashed and at no charge. This was after I told the customer service rep that I was flashing custom firmware and i screwed it up.
YMMV.
The worst case scenario there is they void your warranty and charge you a minimal fee to reflash it.
Click to expand...
Click to collapse
Goodluck!
Fyi 5.4.8.7 is the clockwork version I'm running.
After doing some more research, i found that another person with a different Samsung phone. Followed the same instructions to flash ClockworkMod via Android Mobile Terminal using the same instructions i did and got the same problem. On his post somebody told him that the flash was made to the wrong partition or something like that. So ... Lesson for next time. READ EVERYTHING BEFORE TRYING IT!
neubauej said:
Goodluck!
Fyi 5.4.8.7 is the clockwork version I'm running.
Click to expand...
Click to collapse
Yeah just go to Samsung. Its too bad u never read that the newer versions of CWM recovery don't work on the 747m. The 747 and our m variants are close but still a bit different in a few ways although when coming here for rooms and stuff we have to use this at&t 747. Section. There is a great rooting post under the development stickies and it mentions the UNICERSAL VERSION OF CWM RECOVERY FOR 747m phones and that is the one I used and all of us 747m users should install. 5.4.0.4 or something like that. Definitely not 5.8.x.x. I could have told u that would brick your phone and most proper posts would too. And unfortunately yes the recovery resides in the boot loader area so it can cause a brick.. so keep that in mind when u get your phone fixed. Either use the earlier cwm rec version or just change to TWRP RECOVERY which I just did and many recommend now anyways.
Good luck and I'll come back to post the link with the best root and cwm rec install forOUR 747M phones and remember there are some differences and not all 747 mods will work for us so please read up first
Sent from my SGH-I747M using xda premium
pchemerys said:
Yeah just go to Samsung. Its too bad u never read that the newer versions of CWM recovery don't work on the 747m. The 747 and our m variants are close but still a bit different in a few ways although when coming here for rooms and stuff we have to use this at&t 747. Section. There is a great rooting post under the development stickies and it mentions the UNICERSAL VERSION OF CWM RECOVERY FOR 747m phones and that is the one I used and all of us 747m users should install. 5.4.0.4 or something like that. Definitely not 5.8.x.x. I could have told u that would brick your phone and most proper posts would too. And unfortunately yes the recovery resides in the boot loader area so it can cause a brick.. so keep that in mind when u get your phone fixed. Either use the earlier cwm rec version or just change to TWRP RECOVERY which I just did and many recommend now anyways.
Good luck and I'll come back to post the link with the best root and cwm rec install forOUR 747M phones and remember there are some differences and not all 747 mods will work for us so please read up first
Sent from my SGH-I747M using xda premium
Click to expand...
Click to collapse
I don't think the version he used was the issue as other Canadian users report that 5.8.x.x works fine.
http://forum.xda-developers.com/showthread.php?p=29664739
Edit: the link with instructions for terminal emulator on the op is for the lg thrill which writes the recovery onto block 6. On this phone it needs to be written to block 18.
Sent from my HTC One S using xda app-developers app
Frowben said:
I don't think the version he used was the issue as other Canadian users report that 5.8.x.x works fine.
http://forum.xda-developers.com/showthread.php?p=29664739
Edit: the link with instructions for terminal emulator on the op is for the lg thrill which writes the recovery onto block 6. On this phone it needs to be written to block 18.
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
Ah yes..that makes sense. That would pooch the phone. As for cwm it appears I was mislead as I read on few posts that newest versions don't work or not recommended for Canadian variant but it appears u might be right and I'm now seeing more and more report that it is installable. I'll have to check it out. Thanks
You flashed a recovery for the LG Thrill 4G. At what point in time did you assume it was the same phone as the I747M? You have bricked your phone. It needs JTAG service. Samsung will probably cover it under warranty, or you can pay someone that has the equipment to do it. You have no other options at this point. When you get it back from repairs, make sure you only flash AT&T/Bell/Telus/Rogers I747(M) software to the phone....
Ya i got the phone back from Samsung after waiting 3 weeks. They had to change the motherboard on the phone. Yes, it was the wrong instructions i followed which screwed me over! Since than i re-rooted how i did the first time i got the phone. Just a few days ago i saw the new CyanogenMod 10 M1 Rom, which i wanted to install. And again like last time in order to install it i had to upgrade my CWM to the newest version. This time i did not rush into it like last time and consulted with my buddy who is an expert in Android. The problem i had last time was i downloaded the new CWM in an .img file, and this time i ended up finding the newest CWM in a .tar and used Odin to flash it successfully. Than i just installed the rom and was good to go. My main reason for wanting to install a custom rom was i was getting absolutely HORRIBLE battery life from my S3. I ended up buying a juice pack which greatly helped me out. But now that i have CM10 my battery life is phenomenal, + the juice pack i now go maybe 2 days without having to charge. Now my sister who has the Wind Mobile S3 T999V wants me to upgrade her rom to the same as mine. I have found the T-Mobile CWM for her phone, and all the relevant software, but i am still hesitant to install the CWM on her phone. The T-Mobile CWM 6.0.1.2 is compatible with the Wind Mobile S3 T999V right? Or do i have to use a different version?
just to be clear about where you went wrong (im sure its been said already)
the guide you followed to install cwm is from the lg thrill forum. so the command dd if=... of=... had the wrong device id which is the most common cause of a brick
its actually pretty difficult to mess up your phone as long as you don't use mods designed for other devices
jefferson9 said:
just to be clear about where you went wrong (im sure its been said already)
the guide you followed to install cwm is from the lg thrill forum. so the command dd if=... of=... had the wrong device id which is the most common cause of a brick
its actually pretty difficult to mess up your phone as long as you don't use mods designed for other devices
Click to expand...
Click to collapse
Yes, i know that. I realized after i had done everything that the instructions where for another phone. Now im trying to find the CWM 6.0.1.2 for my sister phone T-Mobile S3 T999V that is in a .tar file already. Any suggestions on where i can get it?
I use cwm 5.8 .0.4 i think and it works fine go to the dev stickies and its there
Sent from my SAMSUNG-SGH-I747 using xda premium
JB calhoun said:
I use cwm 5.8 .0.4 i think and it works fine go to the dev stickies and its there
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Ya for my sisters phone i have that version as a flashable tar, however to install CM 10 M1 i need to install CWM 6.0.1.2.
Did u try rom manager
Sent from my SAMSUNG-SGH-I747 using xda premium
Hello everyone i am in a peculiar situation i recently got s3 from my friend he said that it is I9300 but when i received it i came to know that it is T999 and not I9300 . My problem here is it came with android version 4.1.1 build number : I9300ZSEMC1 i didn't understand why it came with i9300 firmware ( i cannot ask my friend as he does not have much technical knowledge ) everything is working fine occasionally touch does not respond and i have bit of hard time switching on wi fi and weird battery drain problems what i want to know is , is these because of the i9300 firmware being present in t999 and whether is it advisable to update it further from 4.1.1 version to t999 latest stock firmware or to stick with the present version . If it is advisable to update to t999 based stock firmware i want to know whether it will work in indian carriers and wont have any problems and also can someone guide me for the right firmware link / build number to go with. :fingers-crossed:
I didn't know the firmware would actually flash across models.
Sent from my SGH-T999 using Tapatalk
tokenpoke said:
I didn't know the firmware would actually flash across models.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
But it did ! Its a dual core version with 2 gb ram i verified it in download mode it stated as T999 and yet i wonder how is it running I9300 firmware !
toxicated2 said:
But it did ! Its a dual core version with 2 gb ram i verified it in download mode it stated as T999 and yet i wonder how is it running I9300 firmware !
Click to expand...
Click to collapse
Isn't the I9300 the 1gbp ram version?
Anyway, if certified in download mode you could just flash t999 firmware.
If that doesn't sound safe you can also put a t999 recovery on it and try doing a backup and installing a t999 rom
Sent from my SGH-T999 using Tapatalk
tokenpoke said:
Isn't the I9300 the 1gbp ram version?
Anyway, if certified in download mode you could just flash t999 firmware.
If that doesn't sound safe you can also put a t999 recovery on it and try doing a backup and installing a t999 rom
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
I was thinking of using root_66 firmware for t999 will i end up locking the phone or will it work in indian network carriers after flashing tmobile firmware ?
toxicated2 said:
I was thinking of using root_66 firmware for t999 will i end up locking the phone or will it work in indian network carriers after flashing tmobile firmware ?
Click to expand...
Click to collapse
Sounds kinda like some of the "frankenphones" we've heard about over the last several months. Or it could also be a fake/chinese knock off. If I were you, I would see if there were any way to send it back to whoever sold it. If you plan to keep it though, understand anything you do is AT YOUR OWN RISK! The only absolutely safe course of action is to do nothing to it. If you try to flash it via Odin, and it allows it to flash, but you chose the wrong firmware, it WILL brick. There is honestly no possible way to know for sure what is up with the device.
If I had to guess, something is lying to you about what you are running. If your current firmware version is from an I9300, then that is most likely what you have. That firmware WILL NOT work on any Qualcomm, US model S3's. This tells me that its probably an I9300, and someone screwed with something, (or was careless when trying to copy Samsung), in the bootloader. Because it tells you it is a T999 in download mode, it will probably not let you flash the I9300 firmware. But if you try to flash the T999 firmware, there is a very good possibility you will brick it.
It is up to you what you want to try, but understand you are taking a bigger than normal risk since you already know the device isnt normal to begin with.
One way you can try to determine what motherboard it uses, (though this is by no means a for certain way to know), is go to the SIM unlock thread in General and try to follow those instructions. Also try the GPS fix thread in the Q&A sticky roll up. If I am not mistaken, both use dialer codes that are specific to Qualcomm devices. If they work, its a better chance of it being a T999. If they do not work, its more likely to be an I9300.
DocHoliday77 said:
Sounds kinda like some of the "frankenphones" we've heard about over the last several months. Or it could also be a fake/chinese knock off. If I were you, I would see if there were any way to send it back to whoever sold it. If you plan to keep it though, understand anything you do is AT YOUR OWN RISK! The only absolutely safe course of action is to do nothing to it. If you try to flash it via Odin, and it allows it to flash, but you chose the wrong firmware, it WILL brick. There is honestly no possible way to know for sure what is up with the device.
If I had to guess, something is lying to you about what you are running. If your current firmware version is from an I9300, then that is most likely what you have. That firmware WILL NOT work on any Qualcomm, US model S3's. This tells me that its probably an I9300, and someone screwed with something, (or was careless when trying to copy Samsung), in the bootloader. Because it tells you it is a T999 in download mode, it will probably not let you flash the I9300 firmware. But if you try to flash the T999 firmware, there is a very good possibility you will brick it.
It is up to you what you want to try, but understand you are taking a bigger than normal risk since you already know the device isnt normal to begin with.
One way you can try to determine what motherboard it uses, (though this is by no means a for certain way to know), is go to the SIM unlock thread in General and try to follow those instructions. Also try the GPS fix thread in the Q&A sticky roll up. If I am not mistaken, both use dialer codes that are specific to Qualcomm devices. If they work, its a better chance of it being a T999. If they do not work, its more likely to be an I9300.
Click to expand...
Click to collapse
I decided to go ahead with flashing root66 firmware and selected the latest 4.3 can't express how nervous i was to find out the outcome of it and then finally when the process was over to my surprise i did not face any bootloops or any other problem infact the network seemed to be working well and no problems as far now happy !! Thanks for the help @DocHoliday77 @tokenpoke
toxicated2 said:
I decided to go ahead with flashing root66 firmware and selected the latest 4.3 can't express how nervous i was to find out the outcome of it and then finally when the process was over to my surprise i did not face any bootloops or any other problem infact the network seemed to be working well and no problems as far now happy !! Thanks for the help @DocHoliday77 @tokenpoke
Click to expand...
Click to collapse
There is a chance that someone modified the model number in the phone to access certain apps or something.
I remember modifying a phone to do that go some exclusive app a couple years ago.
Sent from my SGH-T999 using Tapatalk
First off I NEVER have had rom issues before this, it all started with a failed encryption attempt that soft bricked my phone. instead of re posting what i wrote here is a link to the 2 pg thread in which i received help and thus this is where i am at.
http://forum.xda-developers.com/showthread.php?t=2701706
OK now ever since then i have never been able to update to a new rom. I believe it let me do it once and i believe i am using an older version of S3Rx.
I believe it may be due to how I updated to 4.3 I would like to get 4.4 as i believe kit kat (tell me if im wrong) will probably be the last android os the S3 will support so i basically want to get the most out of it as i can and also be able to try other roms in general like i used to. Because i currently do not have a sd card I have yet to try anything drastic as i normally use my sd card for backups and rom installs because if something happens to the phone i have the sd card backup.
So in all What should I DO, I have fears of using Odin as the one time it failed on me i bricked a phone and I cant really afford to hard brick this one like i did the other. Although the only thing I can think of being a dumb leach user and non dev. Would be to use odin with the most recent root66 then go from there? Although again lol all i can think of is the above.
Thanks for reading and i hope like the last time I will recieve help to bring back the life to this device. TIA!!
Can you give a little more info on why you can't flash, like an error message or something?
serio22 said:
Can you give a little more info on why you can't flash, like an error message or something?
Click to expand...
Click to collapse
for some reason using twrp and cwm they fail with twrp it normally fails instantly and with cwm it will fail sometime during the install.
I need to put a rom on my phone and ill give exact error. I havce been trying to use the likewise port from att http://forum.xda-developers.com/galaxy-s3-t-mobile/development/rom-likewise-s5-4-1-tw-4-4-2-ne4-t2879647 I normally use an sd card as i have the 12gb model and some roms are large but i should still be able to succeed (we will see from the error message)
thanks for replying
Alright. Also make sure you are using the latest recoveries
serio22 said:
Alright. Also make sure you are using the latest recoveries
Click to expand...
Click to collapse
HRM i guess im ok i just installed the latest S3Rx as i wanted to see what made it stop so i chose this rom (because i needed to update anyway) and it had aroma so I thought perfect ill know when it fails but it worked out ive downloaded and tried to install likewise several time at first i thought i got a bad download but ive tried again and for some reason. I have yet to try a 4.4 (i wanted to try likewise so thats why i chose it) so without trying other roms my issue has something to do with going to 4.4 from 4.3 IDK though as i have not tried other roms but no one else seams to have this issue with this rom port?
Any 4.4 rom suggestion to try to find out what the issue is?
currently installed base-band modem should have no impact on rom installation only the fact i wont get signal right?
I just cant think of any reason why i am having the issue?? any ideas anything i should check to make sure its right on my mobile? BTW thanks for coming back to help as this is possibly a stupidity problem which is hard to help how do you help stupid lol?
Try S3rx 4.4.2 or do you mean aosp/cm?.. And correct, baseband/modem won't matter on ROM installation.. I'm sure it's not stupidity, believe me we all get issues we cannot understand at times and the next time you try, problem is gone lol
serio22 said:
Try S3rx 4.4.2 or do you mean aosp/cm?.. And correct, baseband/modem won't matter on ROM installation.. I'm sure it's not stupidity, believe me we all get issues we cannot understand at times and the next time you try, problem is gone lol
Click to expand...
Click to collapse
i personally prefer touchwiz so no aosp or cm and the latest version of s3Rx i though is what i just installed but its only 4.3 not 4.4
http://forum.xda-developers.com/showthread.php?t=2326763
installing that works but i still cant get to 4.4 im going to search for one that has aroma maybe it will work do you have any suggestions on a good touchwiz based rom on the latest version of android?
To me Likewise looked the best but trying to get that rom working is what prompted this OP.
I still have yet to try again after this recent rom update as I havent had the time and the battery level is not high enough yet to start as i will need to create a new backup and delete my old ones as i have the 12 gb model and currently no sd card.
I will post back when that has been done to show my results. In the mean time ill be searching for another possibly suitable rom like i already said something with aroma and if you have a preference ill try that first.
S3rx 4.4.2 http://forum.xda-developers.com/showthread.php?t=2848080 try that and see if it works
Sent from my SGH-T999 using Tapatalk
serio22 said:
S3rx 4.4.2 http://forum.xda-developers.com/showthread.php?t=2848080 try that and see if it works
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
it wont change my modem? and it will be OK I NEVER have used a rom other than roms made specially for t-mobile i was always under the impression that's a bad idea? I know att and t-mobile are sometimes compatible though but Ive still always been weary so before i do it you want me to use an att rom on my t-mobile?
Anythi8ng special i should know before i do it (besides thew obvious like make a backup and follow op directions) because im not on att i dont want another soft brick (cant afford to have that happen right now either) and a HARD brick would totally mess me up. (i just paid this off lol)
serio22 said:
S3rx 4.4.2 http://forum.xda-developers.com/showthread.php?t=2848080 try that and see if it works
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
it wont change my modem? and it will be OK I NEVER have used a rom other than roms made specially for t-mobile i was always under the impression that's a bad idea? I know att and t-mobile are sometimes compatible though but Ive still always been weary so before i do it you want me to use an att rom on my t-mobile?
Anythi8ng special i should know before i do it (besides thew obvious like make a backup and follow op directions) because im not on att i dont want another soft brick (cant afford to have that happen right now either) and a HARD brick would totally mess me up. (i just paid this off lol)
EDIT:
AT&T I747 users should update bootloaders and modem to NE4 http://forum.xda-developers.com/gala...pdate-t2808654 I747M and T999 users need to be on 4.3 firmware or ROM will not boot.
Click to expand...
Click to collapse
after reading this it makes me for comfortable so ill try it out Im currently on S3Rx 4.3 so wish me luck I sure hope it works!!
Edit: well I tried it it installed fine but the screen would not display i could feel the phone vibrate as to start up although like i said no boot screen no Samsung loading screen basically yeah I'm having problems with 4.4.X
You don't need to change anything and it won't change your modem, you just need to be on 4.3 firmware
serio22 said:
You don't need to change anything and it won't change your modem, you just need to be on 4.3 firmware
Click to expand...
Click to collapse
ill try again but the rom you said to try installed fine no problems but after restart no display????? it vibrated so IDK if it even booted. I am really confused I have never had problems like this. Especially with this phone as it has been easy from the start not the case with other devices i have used.
So ill try again maybe a reboot will get it working IDK but i guess ill try it again cross your fingers
BeatnikBandit said:
ill try again but the rom you said to try installed fine no problems but after restart no display????? it vibrated so IDK if it even booted. I am really confused I have never had problems like this. Especially with this phone as it has been easy from the start not the case with other devices i have used.
So ill try again maybe a reboot will get it working IDK but i guess ill try it again cross your fingers
Click to expand...
Click to collapse
That means you are not on 4.3 firmware, so update your firmware and try again
serio22 said:
That means you are not on 4.3 firmware, so update your firmware and try again
Click to expand...
Click to collapse
my phone says its 4.3 but like you said it must be an issue how do i update my firmware again?
BeatnikBandit said:
my phone says its 4.3 but like you said it must be an issue how do i update my firmware again?
Click to expand...
Click to collapse
You could be on a 4.3 ROM, but have a 4.1.x bootloader.. Download latest 4.3 firmware for your device and flash it with Odin
So yes i must be on 4.1.2 as that was the last time i flashed with odin so i believe you help3ed me with my main isssue now this is something i would like to be sure of:
Can i simply flash the following posted on the s3rx page or will i have to use odin i prefer not to as well i don't know much about it and it scares me as idk how to if possible backup in case of error as the only unfixed problem i have ever had was a while rooting a galaxy s 4g (the one that came with inception) and i walked away and the cord was unplugged and there was an error that it still has about firmware upgrade failure connect to kies and neither kies nor odin will connect to it so its currently in the same situation. So i am fearful of using odin unless it must be done.
Complete 4.3 T999, T999L and T999V bootloader and modem packages.
After flashing DO NOT try to install any older bootloaders or use any other odin.tar other then the latest 4.3 or you will brick your phone.
T999 ONLY, T999 ONLY, T999 Only
T999 ONLY, T999 ONLY, T999 Only
Complete MJC bootloader and modem
http://www.mediafire.com/download/5c..._modem_4.3.zip
Complete NC2 bootloader and modem *Added 3-22-14* Thanks to @Synthetic.Nightmare
http://www.mediafire.com/download/fc..._modem_4.3.zip
Click to expand...
Click to collapse
Would this be enough (would probably use NC2) or will i be better of using the latest root66 with odin? and if so can you give me some tips on odin usage as i would get the latest odin and the latest root66 rom and flash it hoping it works I would try to learn more also but yeah.
It's better to flash the full firmware with Odin imo, but it should be fine. And yes, use nc2
So i think the best cleanest way is to use odin although i have a few questions
First the latest version of odin should work right so 3.09 or 3.10?
Can a backup before this? is there a way to do it?
Lastly the best rom to flash is root 66 NC2 fot t999
Then i will be on a 4.3 bootloader and will be able to use 4.3+ roms?
I have the drivers the latest odin and the root66 image can you direct me on how to do it as a refresher?
I appreciate all your help!!
Please go to Android development an look at [baseband] an just go to first page should help with everything
I believe the root66 thread has instructions
Hello,
I'm trying to look for the fresh stock rom of SGH-I317 rom so I can flash my phone back to normal. I owned this phone since 2012, I had it rooted and everything else. Last night, it decided to do something funny and now it gets stuck on samsung logo/battery and I can only access download mode for the time being.
So I assume I have to factory set everything and lose data--which i don't care about anymore.
Can anyone please help? Thank you. Stock rom is what I need and Odin as well. Thanks again =)
Adam.
As far as I know there are at least 4 different STOCK versions of SGH-I317 firmware namely 4.1.1 4.1.2 4.3 and 4.4.2. 4.1.2 is the same as 4.1.1 but it has SIM unlock backdoor closed. 4.1.1 is interchangeable up to 4.3 with certain limitations, as soon as you get 4.4.2 you are stock to it.
4.3 is my personal favorite but I can't seem to find clean AT&T ROM for some time now (everything else is available).
If I were you I'd start powering up the phone while holding home and arrow up buttons, do "wipe data/factory reset" follow with "wipe cache partitions" and you should be golden
toshik1 said:
As far as I know there are at least 4 different STOCK versions of SGH-I317 firmware namely 4.1.1 4.1.2 4.3 and 4.4.2. 4.1.2 is the same as 4.1.1 but it has SIM unlock backdoor closed. 4.1.1 is interchangeable up to 4.3 with certain limitations, as soon as you get 4.4.2 you are stock to it.
4.3 is my personal favorite but I can't seem to find clean AT&T ROM for some time now (everything else is available).
If I were you I'd start powering up the phone while holding home and arrow up buttons, do "wipe data/factory reset" follow with "wipe cache partitions" and you should be golden
Click to expand...
Click to collapse
Thanks replying. Unfortunately.. I tried getting into recovery mode but it just won't let me. when I do that.. it only takes me back to the samsung logo. I really really don't know why...
Right now I only have access to the Odin Mode and it comes up as
Product Name :
Custom Binary Download : No
Current Binary Samsung Official
System Status : Custom
did you try flashing recovery again through odin...u can also try this...not sure if it works 100% in ur case...but doesn't hurt to try.
https://forum.xda-developers.com/showpost.php?p=70916644&postcount=11912
dssheeley1 said:
did you try flashing recovery again through odin...u can also try this...not sure if it works 100% in ur case...but doesn't hurt to try.
https://forum.xda-developers.com/showpost.php?p=70916644&postcount=11912
Click to expand...
Click to collapse
See that's the thing. I need the stock rom so i can flash it lol. I asked it a few times before too ^__^;; . The good thing is, the battery still works fine .
Now on Odin.. I get many failed attempts..so I'm not sure I have the right stock rom.
edit : I tried that method..didn't work ....
beatsme2 said:
See that's the thing. I need the stock rom so i can flash it lol. I asked it a few times before too ^__^;; . The good thing is, the battery still works fine .
Now on Odin.. I get many failed attempts..so I'm not sure I have the right stock rom.
edit : I tried that method..didn't work ....
Click to expand...
Click to collapse
Try samsung firmware n get rom that way...then reroot
dssheeley1 said:
Try samsung firmware n get rom that way...then reroot
Click to expand...
Click to collapse
Amigo...
Whereeeeeeeee..... u__u;
beatsme2 said:
Amigo...
Whereeeeeeeee..... u__u;
Click to expand...
Click to collapse
https://www.sammobile.com/firmwares/
Remember u can downgrade from 4.4.x...there's a thread in forum that explains what tz files r needed and which bootloader 2...I've done it couple of times myself from Dn4 rom and Eclipse V9 from 7100 thread. Just gotta read and be patient. Hope u get all straightened out. Keep us informed on progress.
With the phone in download mode, is there anything on the phone about knox or warranty bit? If there is, the phone can't be flashed with any stock ROM from sammobile.com.
dssheeley1 said:
https://www.sammobile.com/firmwares/
Remember u can downgrade from 4.4.x...there's a thread in forum that explains what tz files r needed and which bootloader 2...I've done it couple of times myself from Dn4 rom and Eclipse V9 from 7100 thread.
Click to expand...
Click to collapse
REALLY??? Please show us the link for upgrade! As I said there is no OEM 4.3 ROM at sammobile
I was told many many times that AT&T (and this is the one we are talking about) 4.4.2 ROM can not be downgraded!
I tired the downgrade and yes the system will go down to 4.1.1 but it would keep the 4.4.2 bootloader so the phone won't charge while being off (making it pretty useless).
@audit13 : I've the phone since 2012. I think Im getting a new as is but I know this phone can't be done just yet. if I'm able to access download mode that should warrant itself the possibility of it being fixed. Just need that thread to follow those directions =)
dssheeley1 said:
https://www.sammobile.com/firmwares/
Remember u can downgrade from 4.4.x...there's a thread in forum that explains what tz files r needed and which bootloader 2...I've done it couple of times myself from Dn4 rom and Eclipse V9 from 7100 thread. Just gotta read and be patient. Hope u get all straightened out. Keep us informed on progress.
Click to expand...
Click to collapse
Good Morning, thanks for the link.. But I'm already lost at which one I'm supposed to pick. Can you provide a link to that thread, please? Thank you
Adam
OMG, my bad.
Does the phone say anything about warranty bit or knox in download? If it does, the phone can't be flashed with any ROMs from sammobile.com.
my phone is SGH-I317 NOTE 2 .....
Did you have a chance to look at the download screen on the phone? Model is sgh-i317 in download screen too?
audit13 said:
Did you have a chance to look at the download screen on the phone? Model is sgh-i317 in download screen too?
Click to expand...
Click to collapse
Hi. This is all i have on the download section
http://imgur.com/a/zYql8
Maybe I'm missing something extra like the videos i've seen ?
What is the model number on the label under the battery? Something is very wrong because there is no model number.
audit13 said:
What is the model number on the label under the battery? Something is very wrong because there is no model number.
Click to expand...
Click to collapse
Well the model number SGH-I317 . I'm sure I mentioned it before. And yes. .I find that to be weird too >__<.. What am I missing?
In this case, I would try and flash the stock ROM from sammobile.com in Odin: https://www.sammobile.com/firmwares/database/SGH-I317/
Ok.. so if I download both of these (or which one do you prefer? ). What else do I need to download? I do have two versions of Odin.
edit :
So i tried it on Odin 1.85.
I get something like GET PIT FOR MAPPING?
edit 2 :
Another Odin version gave me
Can't open the serial(COM) port after setup connection
sorry for double posting but here's a reminder
Ok.. so if I download both of these (or which one do you prefer? ). What else do I need to download? I do have two versions of Odin.
edit :
So i tried it on Odin 1.85.
I get something like GET PIT FOR MAPPING?
edit 2 :
Another Odin version gave me
Can't open the serial(COM) port after setup connection
hello guys
i need some help and i hope one of you can help me bring my wife's phone back to life.
long story short.
my wife have SAMSUNG GALAXY A7 2017 sm-a720F
it got into a rebooting loop, so i did a factory reset, and i installed with odin v3.13.1 new firmware (PTR-A720FXXU5CRH3)
after i finished i notice that the phone not recognizing the sim card, when i try to see the IMEI it show unknown
what do i need to do?
did i installed the wrong firmware?
if so, what version do i need to install?
some phone details:
build: R16NW.A720FXXU5CRH3
core version : 3.18.14-14226331-QB19448723 [email protected] #1
SE for android: SEPF_SM-A720F_8.0.0_0016
knox: 3.1 ,knox api level 25
thank you all
waiting for your help
Mor1995 said:
hello guys
i need some help and i hope one of you can help me bring my wife's phone back to life.
long story short.
my wife have SAMSUNG GALAXY A7 2017 sm-a720F
it got into a rebooting loop, so i did a factory reset, and i installed with odin v3.13.1 new firmware (PTR-A720FXXU5CRH3)
after i finished i notice that the phone not recognizing the sim card, when i try to see the IMEI it show unknown
what do i need to do?
did i installed the wrong firmware?
if so, what version do i need to install?
some phone details:
build: R16NW.A720FXXU5CRH3
core version : 3.18.14-14226331-QB19448723 [email protected] #1
SE for android: SEPF_SM-A720F_8.0.0_0016
knox: 3.1 ,knox api level 25
thank you all
waiting for your help
Click to expand...
Click to collapse
You might have done the wrong one like you said. Did you flash the latest firmware?
Sent from my Samsung SM-A520W using XDA Labs
yes i think this is the latest firmware but with the wrong carrier.
what should i do now?
Mor1995 said:
yes i think this is the latest firmware but with the wrong carrier.
what should i do now?
Click to expand...
Click to collapse
Flash the right carrier.
Sent from my Samsung SM-A520W using XDA Labs
iloveoreos said:
Flash the right carrier.
Sent from my Samsung SM-A520W using XDA Labs
Click to expand...
Click to collapse
haha sure but i dont know which one is the right firmware, i bought the phone from a local store, without specific carrier for the phone.
also, i was able to find my IMEI written on the back cover of the phone.
is it possible to write the IMEI into the phone and just to make it work?
also, when im entering recovery mode to wipe the phone for new firmware installation, it says ""failed to find /misc partition"
Mor1995 said:
haha sure but i dont know which one is the right firmware, i bought the phone from a local store, without specific carrier for the phone.
also, i was able to find my IMEI written on the back cover of the phone.
is it possible to write the IMEI into the phone and just to make it work?
also, when im entering recovery mode to wipe the phone for new firmware installation, it says ""failed to find /misc partition"
Click to expand...
Click to collapse
you will get that error message as a ton of us do. should be an "e" in there somewhere.
I've heard of your situation when flashing older modem/bootloader in a custom rom.
You seem to know enough to grab odin and flash, that's a lot more than many so that's good. Not sure who sold you the phone, but if you want to rule out anything shady I suggest running the IMEI to check on the status.
What country are you in? Where did you download from? And did the phone bootloop soon after attempting to use it with a new SIM?
I looked on sammobile and the only information I could use shows multiple countries. My phone bootloops all the time but that's called learning.
Download the phone info app... heck you might as well go all out and put twrp on it and root/install custom rom. Go all in.... i'll be here waiting...
---------- Post added at 04:15 AM ---------- Previous post was at 04:10 AM ----------
Honestly, though... grab the phone info app in the playstore and post the results.
If you THINK it may be stolen and got ripped off, don't put a SIM in it.
Not sure if it is true, but I think it can be rendered unusable if it is hot. But most likely it's just hurtin' from a sour flash. Phone info... (twrp is easy and a touch of magisk will give more info if you get stuck) but I am a rookie.
You in Israel? Can only be one firmware there... flash a Palestinian firmware. It won't... ya know... nevermind.