Develop Bugs

Have to reset phone everytime i flash something in the recovery

I was using my Oneplus 3 on LineageOS for the past few weeks and when I downloaded the latest nightly the phone asked me to go through the setup process again. After I finished setting it up all my apps were crashing and I had to reset the phone. At first, I thought it was a problem with Lineage and so I switched to Ressurection Remix. I installed the rom and set up the phone but as soon I went to flash dolby atmos and reboot I had to set up my phone again and all my apps and settings were gone. I thought it was a bug with lineage so I switched to VertexOS. Again i set up the phone and installed all my apps. I went to flash magisk and the same thing happens. All my apps and settings gone. I am using twrp 3.1.0-0 and this keeps happening whenever I flash something after setting up the rom. I tried only booting to twrp and rebooting the phone but that did nothing so I guess it happens only when I flash something. Has anyone encountered this problem and if so is there a fix? Any help would be appreciated.

ujan1996 said:
I was using my Oneplus 3 on LineageOS for the past few weeks and when I downloaded the latest nightly the phone asked me to go through the setup process again. After I finished setting it up all my apps were crashing and I had to reset the phone. At first, I thought it was a problem with Lineage and so I switched to Ressurection Remix. I installed the rom and set up the phone but as soon I went to flash dolby atmos and reboot I had to set up my phone again and all my apps and settings were gone. I thought it was a bug with lineage so I switched to VertexOS. Again i set up the phone and installed all my apps. I went to flash magisk and the same thing happens. All my apps and settings gone. I am using twrp 3.1.0-0 and this keeps happening whenever I flash something after setting up the rom. I tried only booting to twrp and rebooting the phone but that did nothing so I guess it happens only when I flash something. Has anyone encountered this problem and if so is there a fix? Any help would be appreciated.
Click to expand...
Click to collapse
Try the TWRPs from eng.stk and jcadduono. I think that the official TWRP is ok only for OOS.

do u use custom kernel ??
happened to me.
used elemntalex kernel ( not the cause of the problem )
when i used fusion govener i got that problem

Phone hangs irrespective of the custom ROM.

I tried Lineage and AOSP roms on my vibe k5 plus. Use ARM64 pico open gapps. Both are very laggy. The phone is slow, it hangs, app crashes, restarts and switches off automatically. Its completely not compatible with any ROM.
All i did was flash twrp, took a backup of stock rom, wiped the phone and flashed ROM and gapps. (Did not unlock bootloader)
Please suggest some solution.
Thank You.

deepakramji said:
I tried Lineage and AOSP roms on my vibe k5 plus. Use ARM64 pico open gapps. Both are very laggy. The phone is slow, it hangs, app crashes, restarts and switches off automatically. Its completely not compatible with any ROM.
All i did was flash twrp, took a backup of stock rom, wiped the phone and flashed ROM and gapps. (Did not unlock bootloader)
Please suggest some solution.
Thank You.
Click to expand...
Click to collapse
How's the temperature?Might be thermal throttling...
Also, post your variant.

bodafranus said:
How's the temperature?Might be thermal throttling...
Also, post your variant.
Click to expand...
Click to collapse
The temperature goes more than normal whenever it automatically restarts.
Variant: A6020a46 (3GB RAM).

There will be lag if use the ROM for the first time and it will heat during first use if that's not the case then u must be using a custom kernel or try kernel auditor and low the processor speed them check it .The heat might subside but it might be laggy and do note our processor do heat more than other processors

wifi not working after root

Straight away after rooting 4.7.5. my wifi doesn't work. Like the toggle won't turn on etc and won't find networks. But after a reboot it's fixed until the next reboot which it starts again.
Any idea how to fix it for good or wait for updates?

known problem, Have to wait on update

Lol! It's not a rooting issue at all. Only after flashing a custom kernel you CAN end up with non functioning WiFi but that's only because the kernel-thread hasn't been read properly.
Rooting + WiFi = zero problems :good:

Likely a custom kernel was installed which installed it's own wifi (and other) modules. Then the kernel was changed or reverted back to stock, but system partition is still changed with custom modules for connectivity. If you revert back from a custom kernel, a "dirty" flash of the system partition usually solves the issue.

Maybe it was after magisk. After magisk patches the boot.img it's "sort of" custom kernel Right. I had magisk 14.5 beta and wifi wasn't working and I flash 14.0 and it's seemed to fix it i think.

wifi working- but...
Hi, my wifi works (picks up all networks nearby- including mine)
but-
it won't connect to my network when using passcode.
Any ideas?
Running Lineage current and used magisk to root initially...
HELP!
It's driving me nuts.

Having same issue as above.
Can search for but cannot connect to my WiFi.
First issue I had after rooting was Facebook messenger force closing only while I was writing a message, installed a custom rom and hasn't happened since. I cleared cache and data, tried a full format, reinstalled magisk and tinkered with settings with no luck still.

zuk z2 plus keep restarting

hi all, please help. My zuk z2 plus keep restarting.
When I start it, it just open up the wallpaper and then restarting again and again.
The memory's just fine, still 25GB.
One weird thing is it shows 1/1/1970 for the date.
Is it some kind of bugs or virus?
What should I do? Anybody knows how to solve it?
Thanks in advance

You should try to restore the device back to its original firmware to make it run on factory default software.
Use QPST/QFIL method to flash your stock ROM. In case of Indian/Global Eng, then i guess the Zui 2.0 or 2.5
Refer to this thread for details https://forum.xda-developers.com/lenovo-zuk-z2/how-to/guide-lock-bootloader-avail-warranty-t3694883
Make sure to charge the device and your laptop battery fully before proceeding to QPST/QFIL flashing. Device or PC must not lose power or reboot while running the flashing process.
(Warning, QPST method will relock your bootloader while restoring factory default)
Once you are on your stock ROM, check if everything working fine or not. In case things are still not working, there is a high chance that you may be having some hardware issue.

Friend If your phone has already been installed zui 2.5 indiana (then installed the customs roms) Do not need to upgrade (install the Chinese 3.5 by qpst). The basebands do not come out of 1.70x only have one that is different that is 1.76 (mine is zuk z2 + (131) in it I put the zui 2.5 indiana and then went to the customs roms and now I went to the roms with kernel 4.4 without installing zui 3.5

[Help] Problems flashing any android 10+ roms on my redmi 7 device

Hello XDA people. I'm an enthusiast of flashing and testing android ROMs, but I am kinda rookie using this device.
The problem in question is that I cannot successfully flash any Android 10 and later ROMs on my device, I always face several problems after flashing and booting any ROM, such as the wifi's not working (got the exclamation mark on the icon), audio problems, mobile data increiblely slow, bluetooth and GPS issues, etc etc. I tried to flash official and supported ROMs like lineageos, evolutionx, pyxisos, havoc as well as unofficial roms, but I always get the same problems (the wifi issue is the problem that I want to fix the most)
I tried flashing the original MIUI firmware through recovery and bootloader method, I dirty/clean flashed the roms after and nothing, I also used factory reset, used OrangeFox, TWRP (official and unofficial versions) and I still have the same result. I tried every method I know and it seems I won't have the problem fixed. I don't know if it's that the firmware is not properly flashed, or if I deleted a partition. What can I do?
The device only works using the MIUI original firmare but I don't like it because of the bloatware and the waste of resources. I currently use MMX rom (a modified MIUI rom) in my device right now. It works well but It's currently outdated. I just want to use an AOSP based ROM and having my device updated. Please HELP ME!