Related
Hi,
Enjoy two ways of flashing newest european lollipop for HTC Desire Eye
HowToOTA:
1) revert to stock recovery (skip if already have): fastboot flash recovery recovery.img
2) flash ota zip
If you get red triangle this means that you have modified /system partition.
In order to get successfull flash you have to have unmodified /system partition.
DOWNLOAD STOCK EUROPE OTA ROM:
- OTA_EYE_UL_L50_SENSE60_MR_HTC_Europe_2.19.401.1-1.17.401.9.zip
md5: DD40769B8F35F864A81775CF6D544E34DOWNLOAD STOCK 4.4.4 RECOVERY USED FOR OTA UPDATE:
- here
HowToTWRP:
1) flash twrp via fastboot like stock one
2) extract backup data to "/EXTERNAL_SD/TWRP/BACKUPS/FAxyxyxyxyxyx/...."
3) Restore system+boot via twrp
4) flash lollipop firmware with radio, two ways:
- put 0PFHIMG.zip on external sd, and run bootloader (vol- and power, hboot), accept flash.
- or via fastboot:
* fastboot oem lock (thx modaifallah!)
* fastboot oem rebootRUU
* fastboot flash zip 0PFHIMG.zip (twice as I rememeber)
DOWNLOAD EU TWRP BACKUP:
2.19.401.1_eu_twrp_backup_by_condi.zipDOWNLOAD EU FIRMWARE+RADIO after TWRP restore:
- firmware
md5: FECA6EDC14975404782684CB374E0CB3
HowToRoot:
1) flash twrp via fastboot like stock one
2) root supersu (update zip via recovery)
DOWNLOAD TWRP RECOVERY:
- this one,
- or this one.DOWNLOAD SUPERSU (ROOT) UPDATE ZIP FOR TWRP:
- http://download.chainfire.eu/supersu
Br
Condi
Any special procedures to flash it if we're rooted with TWRP? Is it necessary to revert to stock recovery? Will we lose root after the OTA?
hudsoncouto said:
Any special procedures to flash it if we're rooted with TWRP? Is it necessary to revert to stock recovery? Will we lose root after the OTA?
Click to expand...
Click to collapse
If you want to flash ota zip, then you'll have to revert back to stock recovery
You can extract it from ota zip >> firmware.zip >> recovery.img
and flash with fastboot flash recovery recovery.img.
You will lose root of course. But its easy to get it back.
To get root again after flash stock just flash again recovery with fastboot,
but this time custom TWRP, and use supersu-update-zip.
Voila
Thanks for the easy tutorial, man! A lot of people don't take the time to do it, appreciate it!
One more question though: this is only for the international version, not for AT&T, right? Also, what to do if, after flashing, you get stock on the screen with the red triangle and exclamation mark? I remember there are some combination of volume and power buttons, but don't recall what it is.
Is it also possible to flash stock recovery, then reboot to stock ROM, factory reset, and accept the OTA via system settings?
Thnks again mate
hudsoncouto said:
Also, what to do if, after flashing, you get stock on the screen with the red triangle and exclamation mark? I remember there are some combination of volume and power buttons, but don't recall what it is.
Click to expand...
Click to collapse
Yes, it was vol+power, dont remember which vol + or -
hudsoncouto said:
Is it also possible to flash stock recovery, then reboot to stock ROM, factory reset, and accept the OTA via system settings?
Click to expand...
Click to collapse
Yep, its also possible Try it first
Thanks alot ! :good:
red triangle
Hello, thanks for the composition.
Unfortunately I have a red triangle. :crying:
What can I do?
Sorry for my English
Thanks
Hollilightman said:
Hello, thanks for the composition.
Unfortunately I have a red triangle. :crying:
What can I do?
Sorry for my English
Thanks
Click to expand...
Click to collapse
restore stock /system partition (1.17.401.9 twrp backup).
i next ~hour i will upload twrp of 4.4.4 and 5.0.2 eu.
compressing now..
condi said:
restore stock /system partition (1.17.401.9 twrp backup).
i next half hour i will upload twrp of 4.4.4 and 5.0.2 eu.
Click to expand...
Click to collapse
Thanks,
about TWRP restore only system, no data.
Is preserved then my settings and Apps?
Hollilightman said:
Thanks,
about TWRP restore only system, no data.
Is preserved then my settings and Apps?
Click to expand...
Click to collapse
Probably yes, but I recommend to have backup,
and make full wipe after flash.
After restore of twrp you should also update firmware.zip
- radio etc. ! I will upload it also with instructions.
Thanks, everything has become good, has functioned updating.:good:
Hi!
I can't flash the radio via fastboot
fastboot oem rebootRUU works, but when i do fastboot flash zip 0PFHIMG.zip it says kinda
Code:
target reported max download size of 1826418688 bytes
sending 'zip' (51775 KB)...
OKAY [ 2.893s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 5.113s
I tried it 3 times, and all 3 times i got this message. What can i try to do else to flash the radio?
P.S.> I cant open the 0PFHIMG.zip with 7zip. Is it ok? Tried to redownload it twice, but no luck again
NoXXX said:
Hi!
I can't flash the radio via fastboot
fastboot oem rebootRUU works, but when i do fastboot flash zip 0PFHIMG.zip it says kinda
Code:
target reported max download size of 1826418688 bytes
sending 'zip' (51775 KB)...
OKAY [ 2.893s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 5.113s
I tried it 3 times, and all 3 times i got this message. What can i try to do else to flash the radio?
P.S.> I cant open the 0PFHIMG.zip with 7zip. Is it ok? Tried to redownload it twice, but no luck again
Click to expand...
Click to collapse
Your download most probably is corrupted. Im adding md5 checksums right now - check it.
I downloaded again firmware zip, and can extract it without problems with 7zip.
br
condi
condi said:
Your download most probably is corrupted. Im adding md5 checksums right now - check it.
I downloaded again firmware zip, and can extract it without problems with 7zip.
br
condi
Click to expand...
Click to collapse
I've checked it via http://onlinemd5.com/ and it is ok, but 7zip still can't open it
Maybe you could make a mirror for it?
NoXXX said:
I've checked it via http://onlinemd5.com/ and it is ok, but 7zip still can't open it
Maybe you could make a mirror for it?
Click to expand...
Click to collapse
uploading to google drive, compressed 2nd time .7z,
grab it here.
unpack from 7z, and you should have proper not corrupted .zip
condi said:
uploading to google drive, compressed 2nd time .7z,
grab it here.
unpack from 7z, and you should have proper not corrupted .zip
Click to expand...
Click to collapse
Strange. 7z extracts ok, but zip is corrupted anyway.
Tried to download and unpack it on smartphone - the same problem. What am I doing wrong?
NoXXX said:
Strange. 7z extracts ok, but zip is corrupted anyway.
Tried to download and unpack it on smartphone - the same problem. What am I doing wrong?
Click to expand...
Click to collapse
I've downloaded on my mobile, extracted .7z with RAR for Android, extracted .zip, all went fine.
Got nooooo idea..
condi said:
I've downloaded on my mobile, extracted .7z with RAR for Android, extracted .zip, all went fine.
Got nooooo idea..
Click to expand...
Click to collapse
Tried to open it via RAR for android and succeeded. So, the file is ok, but I still cant flash it, got
Code:
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
I have gray *** Software status: Modified *** on the bootloader screen just above the *** UNLOCKED *** string. Is it ok? My cid is HTC__A07
NoXXX said:
Tried to open it via RAR for android and succeeded. So, the file is ok, but I still cant flash it, got
Code:
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
I have gray *** Software status: Modified *** on the bootloader screen just above the *** UNLOCKED *** string. Is it ok? My cid is HTC__A07
Click to expand...
Click to collapse
A07 cid is ok
modaifallah said:
I experienced this error:
flashing firmware with adb/fastboot
sending 'zip' (51931 KB)...
OKAY [ 2.250s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 2.427s
and looks like someone is doing the same. I googled and I found that I have to relock my bootloader first using
"fastboot oem lock" then use your command. Thanks again.
Click to expand...
Click to collapse
Thanks goes to modaifallah
condi said:
fastboot oem lock
Click to expand...
Click to collapse
thanks! it helped!
Hi, Guys.
I am trying to install the recovery in my phone, but without success.
I already tried some versions of twrp for our moto z play and able not to flash the trwp.
My bootloader is unlocked.
When i typed , show me the message below.
C:\Users\myuser\adb>fastboot flash recovery recovery.img
target reported max download size of 536870912 bytes
sending 'recovery' (12496 KB)...
OKAY [ 0.400s]
writing 'recovery'...
(bootloader) Image not signed or corrupt
OKAY [ 0.197s]
finished. total time: 0.601s
fastboot flash recovery ( here the name of your twrp recovery).img
f1fan said:
fastboot flash recovery ( here the name of your twrp recovery).img
Click to expand...
Click to collapse
I already tried severa times and not worked.
iago1966 said:
I already tried severa times and not worked.
Click to expand...
Click to collapse
Are you sure it didn't work? The message is just a warning. The second OKAY indicates that it has been flashed sucessfully.
tomparr said:
Are you sure it didn't work? The message is just a warning. The second OKAY indicates that it has been flashed sucessfully.
Click to expand...
Click to collapse
Hi,
I'm sure that, but when show me "writing 'recovery', i think that the hour what the recovery is instaling in the device, but don't write.
When i choose the option for to go recovery, show me " no comand" and the robo of android .
iago1966 said:
Hi,
I'm sure that, but when show me "writing 'recovery', i think that the hour what the recovery is instaling in the device, but don't write.
When i choose the option for to go recovery, show me " no comand" and the robo of android .
Click to expand...
Click to collapse
What recovery are you trying to flash?
If you are flashing stock recovery , the "no command" screen with the android robot is correct.
tomparr said:
What recovery are you trying to flash?
If you are flashing stock recovery , the "no command" screen with the android robot is correct.
Click to expand...
Click to collapse
I tried recovery of Alberto97(tree versions), tried also chinese recovery, both does not worked.
Did you test the recovery you want to flash by using
fastboot boot recovery
?
It is a bad idea to directly flash an untested recovery. You may get the wrong file. Your download may be broken. Just test it at least once using fastboot boot, and if it runs you may try to flash. I am sure I don't want to flash anything that does not run. Usually I do not flash, but run using the cable if I need it. Do you really need the recovery when you're away from your computer?
Heys guys.
I got today my chinese moto z play from gearbest, it still has android 6 and i cant update it from the system itself, since it says the newwest version is already installed.
What is now the fastest and cleanest way to get android 7/7.1/7.11 or whatever installed? Is there any way to maybe get even original updates after that? So far im in love with the moto z but that chinese restriction sucks really.
Sebastian154 said:
Heys guys.
I got today my chinese moto z play from gearbest, it still has android 6 and i cant update it from the system itself, since it says the newwest version is already installed.
What is now the fastest and cleanest way to get android 7/7.1/7.11 or whatever installed? Is there any way to maybe get even original updates after that? So far im in love with the moto z but that chinese restriction sucks really.
Click to expand...
Click to collapse
Unlock the bootloader and flash TWRP after that flash whatever rom you wish.
flashallthetime said:
Unlock the bootloader and flash TWRP after that flash whatever rom you wish.
Click to expand...
Click to collapse
Is there any guide how to do that with android 7.1.1? Never did this before since i always owned an iphone before...
fastboot flash boot boot.img
target reported max download size of 536870912 bytes
sending 'boot' (32768 KB)...
OKAY [ 1.170s]
writing 'boot'...
(bootloader) Image size exeeded partition limits
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 1.186s
I tried to do it like he did it here: https://forum.xda-developers.com/moto-z/how-to/update-to-7-0-nougat-xt1650-03-retus-t3513095/page2
But while flashing the boot.img it says:
fastboot flash boot boot.img
target reported max download size of 536870912 bytes
sending 'boot' (32768 KB)...
OKAY [ 1.170s]
writing 'boot'...
(bootloader) Image size exeeded partition limits
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 1.186s
Cant boot the system up anymore now.
fastboot flash boot boot.img
target reported max download size of 536870912 bytes
sending 'boot' (32768 KB)...
OKAY [ 1.170s]
writing 'boot'...
(bootloader) Image size exeeded partition limits
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 1.186s
Sebastian154 said:
fastboot flash boot boot.img
target reported max download size of 536870912 bytes
sending 'boot' (32768 KB)...
OKAY [ 1.170s]
writing 'boot'...
(bootloader) Image size exeeded partition limits
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 1.186s
Click to expand...
Click to collapse
Why are you flashing the boot.img?
flashallthetime said:
Why are you flashing the boot.img?
Click to expand...
Click to collapse
I was trying to flash twrp, but as i said i have no idea how to do it since any tutorial i found so far didnt worked.
Im trying to do it like a user suggested here now: https://forum.xda-developers.com/moto-z/how-to/update-to-7-0-nougat-xt1650-03-retus-t3513095
But when i try to flash the partition i get this:
>fastboot flash partition gpt.bin
target reported max download size of 536870912 bytes
sending 'partition' (142 KB)...
OKAY [ 0.016s]
writing 'partition'...
(bootloader) no suitable package!
FAILED (remote failure)
finished. total time: 0.047s
Sebastian154 said:
I was trying to flash twrp, but as i said i have no idea how to do it since any tutorial i found so far didnt worked.
Im trying to do it like a user suggested here now: https://forum.xda-developers.com/moto-z/how-to/update-to-7-0-nougat-xt1650-03-retus-t3513095
But when i try to flash the partition i get this:
>fastboot flash partition gpt.bin
target reported max download size of 536870912 bytes
sending 'partition' (142 KB)...
OKAY [ 0.016s]
writing 'partition'...
(bootloader) no suitable package!
FAILED (remote failure)
finished. total time: 0.047s
Click to expand...
Click to collapse
First of all your are flashing the wrong stuff, stop before you hard brick your device.
It should be fastboot flash recovery recovery.img and you need the TWRP recovery.img.
---------- Post added at 02:02 PM ---------- Previous post was at 01:57 PM ----------
Follow this guide to unlock your bootloader and flash TWRP, use Alberto 97 TWRP not the Chinese TWRP, after flashing TWRP use the volume button while still in fastboot mode to select and boot to recovery otherwise it will be over written by the stock recovery
https://forum.xda-developers.com/moto-z-play/how-to/howto-moto-z-play-unlock-root-t3508547
flashallthetime said:
First of all your are flashing the wrong stuff, stop before you hard brick your device.
It should be fastboot flash recovery recovery.img and you need the TWRP recovery.img.
---------- Post added at 02:02 PM ---------- Previous post was at 01:57 PM ----------
Follow this guide to unlock your bootloader and flash TWRP, use Alberto 97 TWRP not the Chinese TWRP, after flashing TWRP use the volume button while still in fastboot mode to select and boot to recovery otherwise it will be over written by the stock recovery
https://forum.xda-developers.com/moto-z-play/how-to/howto-moto-z-play-unlock-root-t3508547
Click to expand...
Click to collapse
Alright, im not in the TWRP interface, but which Android version should i install now? https://forum.xda-developers.com/moto-z-play/development/moto-z-play-stock-firmware-t3454495
Can i just pick the Europe Version for the chinese moto z play? Or will that **** things up?
Also, do i have to root it like the tutorial says or is that not needed?
Sebastian154 said:
Alright, im not in the TWRP interface, but which Android version should i install now? https://forum.xda-developers.com/moto-z-play/development/moto-z-play-stock-firmware-t3454495
Can i just pick the Europe Version for the chinese moto z play? Or will that **** things up?
Also, do i have to root it like the tutorial says or is that not needed?
Click to expand...
Click to collapse
That thread is for fastboot flashing firmware and I would stay away from doing that cause you'll end up in a mess.
Flash my stock TWRP flashable 7.1.1 stock rom that's whats it's for https://forum.xda-developers.com/moto-z-play/development/rom-single-dual-sim-t3620551/page17
Or flash any other custom ROM and you'll see why apple sucks.
flashallthetime said:
That thread is for fastboot flashing firmware and I would stay away from doing that cause you'll end up in a mess.
Flash my stock TWRP flashable 7.1.1 stock rom that's whats it's for https://forum.xda-developers.com/moto-z-play/development/rom-single-dual-sim-t3620551/page17
Or flash any other custom ROM and you'll see why apple sucks.
Click to expand...
Click to collapse
No Notifications Sounds AGAIN isnt that ****ty? I mean you wont have ANY norification? Does it vibrate when you get messages? Or what about a timer, does that count as notification sound too?
Still, im not sure how im supposed to flash now any rom with that TWRP, im not in the menue from TWRP and now what? How do i install a rom?
Also will updates be disabled when i use your rom? I just want it to be normal as possible so i dont have to do this again that soon....
Sebastian154 said:
No Notifications Sounds AGAIN isnt that ****ty? I mean you wont have ANY norification? Does it vibrate when you get messages? Or what about a timer, does that count as notification sound too?
Still, im not sure how im supposed to flash now any rom with that TWRP, im not in the menue from TWRP and now what? How do i install a rom?
Also will updates be disabled when i use your rom? I just want it to be normal as possible so i dont have to do this again that soon....
Click to expand...
Click to collapse
Updates are working on my rom for a reason. As for no notifications sounds just flash arise sound mod as described in my opinion and the sound works fine afterwards.
I would watch some YouTube videos on how to flash ROMs using TWRP recovery, it's easy as downloading the rom and gapps if required and boot to recovery and install your flashable zips.
Your phone will not get any further updates and you will not be able to accept any OTA cause you're device is the Chinese version.
So saying that and avoiding hard bricking your device I would highly recommend you stay with TWRP flashable zips. I have said many times that sideloading firmware can be an issue on moto devices and if you read there's a hard bricked thread that is full of people who think moto devices are nexus or pixel devices which is wrong.
The bootloader on moto devices are problematic under certain circumstances , so I have warned you! I have had many moto devices and not once have I had a hard brick, I always take the root of lease resistance which is flash custom ROMs.
here Android 7.0 for retcn
https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
flashallthetime said:
Updates are working on my rom for a reason. As for no notifications sounds just flash arise sound mod as described in my opinion and the sound works fine afterwards.
I would watch some YouTube videos on how to flash ROMs using TWRP recovery, it's easy as downloading the rom and gapps if required and boot to recovery and install your flashable zips.
Your phone will not get any further updates and you will not be able to accept any OTA cause you're device is the Chinese version.
So saying that and avoiding hard bricking your device I would highly recommend you stay with TWRP flashable zips. I have said many times that sideloading firmware can be an issue on moto devices and if you read there's a hard bricked thread that is full of people who think moto devices are nexus or pixel devices which is wrong.
The bootloader on moto devices are problematic under certain circumstances , so I have warned you! I have had many moto devices and not once have I had a hard brick, I always take the root of lease resistance which is flash custom ROMs.
Click to expand...
Click to collapse
It hans now on formatting system, why is that so?
The zip with your rom is on my sc card, i cant copy it on the system directly, after 10% or so it stops transfering it to the device itself while its in TWRP.
€:
Working, running now Android 7.1..1, but i cant enable my sim cards anymore? They get detected and they ask for a pin but they just wont get any network connection, tested 3 different ones none was able to get activated.
Sebastian154 said:
It hans now on formatting system, why is that so?
The zip with your rom is on my sc card, i cant copy it on the system directly, after 10% or so it stops transfering it to the device itself while its in TWRP.
€:
Working, running now Android 7.1..1, but i cant enable my sim cards anymore? They get detected and they ask for a pin but they just wont get any network connection, tested 3 different ones none was able to get activated.
Click to expand...
Click to collapse
Which carrier are you with?
Hi guys!
I hope you can help me, since I've looked everywhere but can only find people with similar but not the exact same problem.
I tried flashing TWRP in order to migrate to a custom ROM. I am currently running official 7.1.1.
When I try to flash twrp (tried several versions) the command window shows me this:
c:\adb>fastboot flash recovery twrp.img
target max-sparse-size: 256MB
sending 'recovery' (14522 KB)...
OKAY [ 0.049s]
writing 'recovery'...
(bootloader) Image recovery failed validation
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.068s
I tried using Moto fastboot as well but with the same result. I'd really appreciate your help. Please note, that I am not a pro like most you guys so I might have follow-up questions
Are you sure you flashed the right image? And that your bootloader is unlocked?
And what happens if you use
Code:
fastboot boot twrp.img
?
Artim_96 said:
Are you sure you flashed the right image? And that your bootloader is unlocked?
And what happens if you use
Code:
fastboot boot twrp.img
?
Click to expand...
Click to collapse
Yes, I am sure that I am using the right image. I tried several, always checked that they were for addison.
I also unlocked the bootloader in developer options - although now that you mention it: in the fastboot screen it still says oem_locked. So maybe that is the problem?
c:\adb>fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 0.047s]
booting...
(bootloader) permission denied!
FAILED (remote failure)
finished. total time: 0.054s
Okay, I managed to unlock the bootloader with the unlock key I got from Motorola.
Now when I try to flash it says:
c:\adb>fastboot flash recovery twrp.img
target max-sparse-size: 256MB
sending 'recovery' (14522 KB)...
OKAY [ 0.049s]
writing 'recovery'...
(bootloader) Image not signed or corrupt
OKAY [ 0.280s]
finished. total time: 0.330s
Come ooooon
ischariot_pasadelski said:
Are you sure you flashed the right image? And that your bootloader is unlocked?
And what happens if you use
Yes, I am sure that I am using the right image. I tried several, always checked that they were for addison.
I also unlocked the bootloader in developer options - although now that you mention it: in the fastboot screen it still says oem_locked. So maybe that is the problem?
c:\adb>fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 0.047s]
booting...
(bootloader) permission denied!
FAILED (remote failure)
finished. total time: 0.054s
Click to expand...
Click to collapse
Oh Jesus... Bootloader unlock is not just the option in Dev settings. Google it, you'll find a website from Motorola that guides you through the process and provides you with everything necessary
Yes, I did that by now as I said in the post before. Sorry, but I'm a beginner
Now it says that the image is not signed or corrupt. IDK what to do anymore.
Booting in TWRP works but when flashing Lineage from SD card I get the error:
recv error on unevent
and
failed to mount data.
I wiped everything using TWRP and I also tried to use another version of TWRP, so a corrupted file can't be the problem.
I figured it out.
I had to restore the file system by only checking the "System" box when wiping with TPWR - just in case anybody else has the same problems.
So a factory data reset solve the problem? Having your first issue with moto e5 cricket and you can't unlock three bootloader
Artim_96 said:
Oh Jesus... Bootloader unlock is not just the option in Dev settings. Google it, you'll find a website from Motorola that guides you through the process and provides you with everything necessary
Click to expand...
Click to collapse
well, i had it unlocked via the settingsbutton and after read this here , via the website where you can get the 20 bits code, but it is the same result with a code that is the same as the adb devices code, just as before! Only thing that is changed is a warning when you starts the phone up.
ischariot_pasadelski said:
Yes, I did that by now as I said in the post before. Sorry, but I'm a beginner
Now it says that the image is not signed or corrupt. IDK what to do anymore.
Booting in TWRP works but when flashing Lineage from SD card I get the error:
recv error on unevent
and
failed to mount data.
I wiped everything using TWRP and I also tried to use another version of TWRP, so a corrupted file can't be the problem.
Click to expand...
Click to collapse
Can you tell me how you got the phone twrped, pls?
"fastboot flash recovery twrp.img" doesn't work. Gives me an "FAILED (remote: partition length get error)" error while I tried to flash TWRP that I downloaded from "unlock bootloader" XDA page. I have unlocked my bootloader, but couldn't install TWRP and proceed further. Noob here. Any help is appreciated. Thanks in advance.
This is what I got:
F:\Phone\Honor 7x\adb>fastboot flash recovery twrp_Honor_7x.img
target reported max download size of 471859200 bytes
sending 'recovery' (25158 KB)...
OKAY [ 0.634s]
writing 'recovery'...
FAILED (remote: partition length get error)
finished. total time: 0.649s
The New Partition Name in Oreo is recovery_ramdisk for Recovery.
Gesendet von meinem BND-L21 mit Tapatalk
johination said:
The New Partition Name in Oreo is recovery_ramdisk for Recovery.
Gesendet von meinem BND-L21 mit Tapatalk
Click to expand...
Click to collapse
Thanks mate !:good:
This twrp does not want to boot up.
error still not resolved
johination said:
The New Partition Name in Oreo is recovery_ramdisk for Recovery.
Gesendet von meinem BND-L21 mit Tapatalk
Click to expand...
Click to collapse
i am still getting following error
target reported max download size of 471859200 bytes
sending 'recovery_ramdisk' (34634 KB)...
OKAY [ 1.214s]
writing 'recovery_ramdisk'...
FAILED (remote: partition error)
finished. total time: 1.235s
passengerUS$ said:
i am still getting following error
target reported max download size of 471859200 bytes
sending 'recovery_ramdisk' (34634 KB)...
OKAY [ 1.214s]
writing 'recovery_ramdisk'...
FAILED (remote: partition error)
finished. total time: 1.235s
Click to expand...
Click to collapse
what file and command did you use?
mrmazak said:
what file and command did you use?
Click to expand...
Click to collapse
I have used all these commands and n all of them give errors
1) fastboot flash recovery twrp.img
2) fastboot flash recovery_ramdisk twrp.img
3) fastboot flash ramdisk twrp.img
passengerUS$ said:
I have used all these commands and n all of them give errors
1) fastboot flash recovery twrp.img
2) fastboot flash recovery_ramdisk twrp.img
3) fastboot flash ramdisk twrp.img
Click to expand...
Click to collapse
number 2 is correct, as long as your twrp.img is correct oreo recovery.
number 3 has put twrp into your (boot) , this is possibly a bad move.
mrmazak said:
number 2 is correct, as long as your twrp.img is correct oreo recovery.
number 3 has put twrp into your (boot) , this is possibly a bad move.
Click to expand...
Click to collapse
Number 2 is also not working I think I have to wait for official twrp oreo recovery image
passengerUS$ said:
Number 2 is also not working I think I have to wait for official twrp oreo recovery image
Click to expand...
Click to collapse
Im on oreo and am using this twrp on my L24 https://forum.xda-developers.com/p10-lite/development/recovery-twrp-3-2-1-0-t3783447. I used the 0.3.img. I've used it to backup and then flashed magisk 16 with no problems.
Joebloeh said:
Im on oreo and am using this twrp on my L24 https://forum.xda-developers.com/p10-lite/development/recovery-twrp-3-2-1-0-t3783447. I used the 0.3.img. I've used it to backup and then flashed magisk 16 with no problems.
Click to expand...
Click to collapse
Did you make the backup through TWRP or ADB? I'm using the same one and every time I go to make a back up it fails at system.img. Also do you know how to use decryption with it?
stuck on logo screen
Joebloeh said:
Im on oreo and am using this twrp on my L24 https://forum.xda-developers.com/p10-lite/development/recovery-twrp-3-2-1-0-t3783447. I used the 0.3.img. I've used it to backup and then flashed magisk 16 with no problems.
Click to expand...
Click to collapse
i flashed it it wroked perfectly thanks man you saved my day
Hold upppppppp.
Don't use Huawei p10 recovery. I tried it and it just got me stuck on the TWRP splash screen.
Just do "fastboot flash recovery_ramdisk complete_twrp_ramdisk.img"
I use this and it works flawlessly.
https://forum.xda-developers.com/devdb/project/dl/?id=28883
It worked do you have any super su version that works with it because when u install super su it shows ramdisk aborting installation error
passengerUS$ said:
It worked do you have any super su version that works with it because when u install super su it shows ramdisk aborting installation error
Click to expand...
Click to collapse
I would advise not to flash SuperSU. Magisk is the way to go. And you don't give enough details so I (and other people) can't really help you.
You're flashing it through TWRP?
crayonicle said:
I would advise not to flash SuperSU. Magisk is the way to go. And you don't give enough details so I (and other people) can't really help you.
You're flashing it through TWRP?
Click to expand...
Click to collapse
Yes I have flashed it through twrp
Now I want to root my device but when I install supersu in through twrp zip installation it shows
Checking patch status, attempting to find stock backup
Stock restore failed, attempting ramdisk restore
Ramdisk restore failed aborting
Do you need any extra information then pls comment
passengerUS$ said:
Yes I have flashed it through twrp
Now I want to root my device but when I install supersu in through twrp zip installation it shows
Checking patch status, attempting to find stock backup
Stock restore failed, attempting ramdisk restore
Ramdisk restore failed aborting
Do you need any extra information then pls comment
Click to expand...
Click to collapse
Do you get the same error with Magisk? Try Magisk please then report back.
crayonicle said:
Hold upppppppp.
Don't use Huawei p10 recovery. I tried it and it just got me stuck on the TWRP splash screen.
Just do "fastboot flash recovery_ramdisk complete_twrp_ramdisk.img"
I use this and it works flawlessly.
https://forum.xda-developers.com/devdb/project/dl/?id=28883
Click to expand...
Click to collapse
When I first installed the p10 recovery it did hang up on the splash screen for at least a minute. But, now when I enter recovery it hangs more like ten or fifteen seconds.
crayonicle said:
Do you get the same error with Magisk? Try Magisk please then report back.
Click to expand...
Click to collapse
I tried magisk and it worked I was able to successfully root my phone thanks man
---------- Post added at 04:21 PM ---------- Previous post was at 04:17 PM ----------
Joebloeh said:
When I first installed the p10 recovery it did hang up on the splash screen for at least a minute. But, now when I enter recovery it hangs more like ten or fifteen seconds.
Click to expand...
Click to collapse
Use the 0.3 IMG the other updated images hang up on Honor 7x when I used the latest one my twrp got stuck on twrp logo then I flashed it with 0.3 IMG as mentioned in the comment and It worked flawlessly
this is the recovery to use for 7x oreo right?