Related
I'm new to CM13 and I noticed I didn't have root so I went into TWRP and flashed superSU.
The phone booted up fine, I just noticed I wasn't supposed to do this!!
I DON'T have a backup of my current build.
Can anyone suggest what I should do here before something bad happens?
oshax said:
I'm new to CM13 and I noticed I didn't have root so I went into TWRP and flashed superSU.
The phone booted up fine, I just noticed I wasn't supposed to do this!!
I DON'T have a backup of my current build.
Can anyone suggest what I should do here before something bad happens?
Click to expand...
Click to collapse
Hi, I think you could simply reflash your ROM and GAPPS.
That should do it I believe.
oshax said:
I'm new to CM13 and I noticed I didn't have root so I went into TWRP and flashed superSU.
The phone booted up fine, I just noticed I wasn't supposed to do this!!
I DON'T have a backup of my current build.
Can anyone suggest what I should do here before something bad happens?
Click to expand...
Click to collapse
What's the issue? You can flash SuperSU if you'd like root access through the SuperSU app. Doesn't make a difference if root is already built into the ROM, if that's what you're worried about.
kipue said:
Hi, I think you could simply reflash your ROM and GAPPS.
That should do it I believe.
Click to expand...
Click to collapse
Yeah I was thinking the same thing. Just dirty flash ROM and GAPPS, just like if I was upgrading and should retain data but not supersu root. Thanks for the response.
dpryor88 said:
What's the issue? You can flash SuperSU if you'd like root access through the SuperSU app. Doesn't make a difference if root is already built into the ROM, if that's what you're worried about.
Click to expand...
Click to collapse
I'm worried because of these instructions from CM Forums:
http://www.cyanogenmods.org/forums/topic/root-android-using-twrp-recovery-install-supersu/
ROOT ACCESS FOR CYANOGENMOD ROM USERS AND ROMS BASED ON CYANOGENMOD:
If you install SuperSU on a CyanogenMod ROM or any other ROM built on top of CyanogenMod such as Resurrection Remix ROM or any other ROM then then there is a high probability that you will end up with bootloop. CyanogenMod has built-in “su” binary which is just hidden and needs to be accessible by a simple guide.
Click to expand...
Click to collapse
oshax said:
Yeah I was thinking the same thing. Just dirty flash ROM and GAPPS, just like if I was upgrading and should retain data but not supersu root. Thanks for the response.
I'm worried because of these instructions from CM Forums:
http://www.cyanogenmods.org/forums/topic/root-android-using-twrp-recovery-install-supersu/
Click to expand...
Click to collapse
Never happened to me on any phone using a cm based ROM. Seems like this info is outdated.
Anyway, yeah just flash the cm ROM and then Gapps. It'll get rid of su root
oshax said:
Yeah I was thinking the same thing. Just dirty flash ROM and GAPPS, just mods.org/forums/topic/root-android-using-twrp-recovery-install-supersu/[/URL]
Click to expand...
Click to collapse
Well I think if you had no bootloader yet, you'd be safe
https://download.lineageos.org/crackling
The First One!
Do we need su for arm or su for arm64?
Obscurax said:
Do we need su for arm or su for arm64?
Click to expand...
Click to collapse
Arm64
What's the build name of the Swift 2X?
Sent from my Moto G4 using XDA Labs
kartotar said:
What's the build name of the Swift 2X?
Click to expand...
Click to collapse
marmite
M.A.K said:
marmite
Click to expand...
Click to collapse
Thanks. Do you have any idea if LineageOS will be supported on Marmite?
Sent from my Moto G4 using XDA Labs
AFAIK, Swift 2 ks not officially supported by Lineage OS, so no. You may be able to find an unofficial version though.
Cannot dirty flash
I currently have thomson.aa's unofficial lineage os build installed. This update shows up in the updater app, but after I download it, it says the zip is corrupt or unsigned and it does not let me install it. If I manually download it and try to install via TWRP, it fails saying "can't install this package on top of incompatible data. Please try another package or run a factory reset". I would hate to have to reinstall all my stuff, though. Is there some way around this? Or is there something wrong with the update?
Got no problems installing it via TWRP. Works great, stable so far.
crdroid was fine too, lots of special settings (little too much for me), but I prefer a ROM with regular OTA updates. Thank you beroid anyway.
P.S. My grammar help changes "beroid" to "heroic"
Can this be installed over the top of cm13.0 nightly?
Mithodin said:
I currently have thomson.aa's unofficial lineage os build installed. This update shows up in the updater app, but after I download it, it says the zip is corrupt or unsigned and it does not let me install it. If I manually download it and try to install via TWRP, it fails saying "can't install this package on top of incompatible data. Please try another package or run a factory reset". I would hate to have to reinstall all my stuff, though. Is there some way around this? Or is there something wrong with the update?
Click to expand...
Click to collapse
You basically asked the same question in 2 threads??? So as this isn't really thomson.aa's problem, I'll answer you here.
I dirty flashed from stock -> cm13 -> crDroid -> thomson.aa's LOS14 without issue. I tried with the official release and got the same as you. So after editing the installer script to force it to install, it did. But once it booted, everything kept force closing. It just wasn't happening.
So I wiped data and chose to restore my backup from google. I just installs most of your apps but it saves a bit of time. Still need to set things up properly though.
M.A.K said:
You basically asked the same question in 2 threads??? So as this isn't really thomson.aa's problem, I'll answer you here.
Click to expand...
Click to collapse
I figured this might be due to either
- Something being wrong with the currently installed build
- Something being wrong with the one I'm trying to install
That's why I posted in both places. Sorry if that is not the thing to do.
Thanks for your reply. I guess I'll have to do another reinstall then.
Wifi
Installed tonite smoothly however no wifi - anyone else with this?
Same here, just reported a bug to the bugtracker.
Make a clean install three days ago, all works fine
pahesis said:
Same here, just reported a bug to the bugtracker.
Click to expand...
Click to collapse
I have no wifi, too (after trying a dirty install over an old CM13 that resulted in an error). Here's the issue in their bugtracker, I think, in case anyone else experiences this.
Got the same issue when trying to go back to CM13 now -___-
Seems strange that I've had no wifi issues. I've tried turning it on and off with no problems.
A few (maybe patronising) thoughts:
Did you guys check the md5 hash?
Which recovery did you use? I used TWRP 3.0.2.5
Were you previously on COS13.1.2? I was.
I downloaded fresh open-gapps for the install - ARM64, 7.1, nano.
I wiped system, dalvik, cache. Installed LOS14.1, su, gapps in that order.
The dirty boot left me with lots of force closures so I wiped data, dalvik and cache, completed the wizard after booting and all was fine.
M.A.K said:
Did you guys check the md5 hash?
Click to expand...
Click to collapse
Yes
M.A.K said:
Which recovery did you use?
Click to expand...
Click to collapse
TWRP-3.0.3-0
M.A.K said:
Were you previously on COS13.1.2?
Click to expand...
Click to collapse
I was on the latest CyanogenMod snapshot.
I wiped data, dalik and cache, then installed lineage, gapps and su. Restoring a nandroid backup of CM13 did bring the wifi back again.
I then wanted to restore my backup of lineage, because I already transferred most apps and settings and don’t care to much for the wifi (hoping it will be solved in not too far future), but TWRP failed to recover, getting stuck while restoring data, only restoring the system partition. Strangely, after this, the wifi worked, however I experienced many FCs. After wiping data again, the wifi was broken again, the MAC adress showing as 02:00:00:00:00:00.
Wiping system, I tried to reinstall lineage without any extras, but TWRP just got stuck again with no progress being made after detection of the partitions. Strangely, restoration of the lineage backup worked now, including data The original problem persists, of course.
I mentioned COS13.1.2 specifically because it flashes partitions other than system that may affect your situation. CM doesn't. If you've had COS13.1.2 installed previously then these other partitions should be up to date.
If you're having inconsistent results using TWRP3.0.3 it may be worth trying 3.0.2.5.
ES File Explorer
Hello guys! I have a small problem. I installed the LOS 14.1 and now I have error in ES File Explorer, "Sorry test failed. This feature cannot run on your phone".
The su binary I already threw, and all files bin already threw. Help solve the problem!
p.s. sorry for my English
Today I want to share with you the device tree I have made to compile TWRP for our Redmi Pro as well as the images of TWRP to install directly to the device.
What are the advantages of having the recovery compiled from source?
The main advantage of having the recovery compiled from source is the ease to get the recovery updated. Whenever TWRP updates their recovery we will have that version in our phones because we will only need to compile the recovery with the device tree that is already done and that should work perfectly and shouldn't take more than half an hour if everything goes well.
Then I will be updating the recovery when a new version is released
Download Links:
Latest version: 3.3.1
3.3.1: https://www.androidfilehost.com/?fid=1395089523397970924
3.2.3: https://www.androidfilehost.com/?fid=5862345805528068262
3.2.2: https://www.androidfilehost.com/?fid=5862345805528040452
3.2.1: https://www.androidfilehost.com/?fid=818222786056031658
3.1.1: https://www.androidfilehost.com/?fid=745425885120733557
3.1.0: https://www.androidfilehost.com/?fid=457095661767152066
If you like my work you can offer me a beer here
https://www.paypal.me/OrdunaLagarma
XDA:DevDB Information
TWRP, Tool/Utility for the Xiaomi Redmi Pro
Contributors
end222
Source Code: https://github.com/end222/twrp_omega_device_tree
Version Information
Status: Stable
Current Stable Version: 3.3.1
Stable Release Date: 2019-05-21
Created 2017-05-21
Last Updated 2019-05-21
great work thanks
can anyone please help me , i can only use one particular twrp modded by hanuma50 every other twrp this one too cannot recognice my partitions,.. and with htat i cannot install erase or backup anything ,.... any help would be appriciated,.. have bootloader unlocked and im on miui.eu latest build,...
nofx161 said:
can anyone please help me , i can only use one particular twrp modded by hanuma50 every other twrp this one too cannot recognice my partitions,.. and with htat i cannot install erase or backup anything ,.... any help would be appriciated,.. have bootloader unlocked and im on miui.eu latest build,...
Click to expand...
Click to collapse
What I would recommend you is to format data from the recovery so that you will get a compatible data with the rest of recoveries. However you will lose everything you had in the phone
Did that, data was gone but still no partitions recognized...
nofx161 said:
Did that, data was gone but still no partitions recognized...
Click to expand...
Click to collapse
It should be working well :S
Did you really choose format data? (Not wipe data or factory reset) if so try to do it with another recovery, for example with one of the incompatible ones
end222 said:
It should be working well :S
Did you really choose format data? (Not wipe data or factory reset) if so try to do it with another recovery, for example with one of the incompatible ones
Click to expand...
Click to collapse
Did only format data in advanced format menu with the newest twrp u provided... I don't understand that problem...
nofx161 said:
Did only format data in advanced format menu with the newest twrp u provided... I don't understand that problem...
Click to expand...
Click to collapse
The advanced format menu you say is for wipe, not for format. You have to go to wipe in the main menu and there yoh will see an option which is format data (not inside the advanced wipe part)
end222 said:
The advanced format menu you say is for wipe, not for format. You have to go to wipe in the main menu and there yoh will see an option which is format data (not inside the advanced wipe part)
Click to expand...
Click to collapse
ok will give it another try, thanks for the support
nofx161 said:
ok will give it another try, thanks for the support
Click to expand...
Click to collapse
You are welcome
end222 said:
You are welcome
Click to expand...
Click to collapse
so many years of android for me, and twrp, and never ever saw this button *facepalm*
finally worked thanks again
nofx161 said:
so many years of android for me, and twrp, and never ever saw this button *facepalm*
finally worked thanks again
Click to expand...
Click to collapse
Good to hear that
Thanks working fine
No os found
I successfully installed twrp on my redmi pro, but im habving a problem installing a rom after installtion its saying no os found do you want to reboot. Any suggestion about this problem?
Thanks
hella can soembody give isntructions , before i flash twrp how can i unlock bootloader on this phone and how can i root after ?
Nice job, thank you?
nivram26 said:
I successfully installed twrp on my redmi pro, but im habving a problem installing a rom after installtion its saying no os found do you want to reboot. Any suggestion about this problem?
Thanks
Click to expand...
Click to collapse
You just reboot
hi everyone
i have miui 9.5.2 china stable,when flash TWRP 3.1.1 ,bootloop and error permission
can you help me?
Finally managed to boot up TWRP 3.2.1!
I debugged it and apparently it was missing a lib
Will test it a bit to make sure everything works and upload it soon!
end222 said:
Finally managed to boot up TWRP 3.2.1!
I debugged it and apparently it was missing a lib
Will test it a bit to make sure everything works and upload it soon!
Click to expand...
Click to collapse
Yeeeaaaa, you're awesome DD
Hi,
Trying to dualboot OOS and stock. Anyone got this working on oreo only?
matteosaeed said:
Hi,
Trying to dualboot OOS and stock. Anyone got this working on oreo only?
Click to expand...
Click to collapse
There is not a solution that is confirmed to work on the op5t, multirom was released for the op5 but needs to be ported over to 5t. feel free to work on the port!
Misanful said:
There is not a solution that is confirmed to work on the op5t, multirom was released for the op5 but needs to be ported over to 5t. feel free to work on the port!
Click to expand...
Click to collapse
I came across this and was asking. Seems like it has a few downloads wasn't sure if someone had used it.
https://androidfilehost.com/?fid=745849072291693835
matteosaeed said:
I came across this and was asking. Seems like it has a few downloads wasn't sure if someone had used it.
https://androidfilehost.com/?fid=745849072291693835
Click to expand...
Click to collapse
Hmmm. If you test it please report back here how it worked for you!
matteosaeed said:
I came across this and was asking. Seems like it has a few downloads wasn't sure if someone had used it.
https://androidfilehost.com/?fid=745849072291693835
Click to expand...
Click to collapse
I tried it last night. It works, I was able to dual boot. You must download the custom TWRP by the same guy for the 5t. The custom twrp is outdated so it won't read my ntfs formatted portable hard drive. You must also be decrypted.
cubandanger05 said:
I tried it last night. It works, I was able to dual boot. You must download the custom TWRP by the same guy for the 5t. The custom twrp is outdated so it won't read my ntfs formatted portable hard drive. You must also be decrypted.
Click to expand...
Click to collapse
Hey, thanks for trying this. Did you flash any roms?
matteosaeed said:
Hey, thanks for trying this. Did you flash any roms?
Click to expand...
Click to collapse
Yes. I flashed Omni as secondary, although I had to remove the assert lines in the updater script. Then it failed to install magisk on secondary, so to make it work I had to swap primary and with secondary, Flash what I needed to Omni as primary, then swap it again. Pain sticking but worked.
I wonder how hard would it be to update the custom twrp with the most recent changes in regular twrp.
Sounds interesting, what was your other room?
Any chance you tried to restore a nandroid backup as second rom?
pargas said:
Sounds interesting, what was your other room?
Any chance you tried to restore a nandroid backup as second rom?
Click to expand...
Click to collapse
I was using codename Phoenix as primary. I didn't try backing up or restoring using the customer twrp
Anybody that knows anybody that would be able to use the twrp and multirom source and update the recovery with most recent changes?
Hello Guys,
I need help regarding the issue that I'm facing. What happens is ROM get installed properly without any error but not boots up. It get stuck at boot animation screen. I tried lots of ROMs including DOT OS, C droid, AICP, TOXYC OS. Facing the same issue to all of the ROMs. I followed the below steps to install.
1. Download the ROM file
2. Download the GApps.
3. Booted into TWRP Recovery Mode.
4. Backup done (optional)
5. Wipe all the 4 partitions except Internal Storage.
6. Then install the ROM file and followed by GApps
7. Installation successful for both ROM & GApps.
8. Reboot.
I tried installing the ROM only but result was same.
I'm currently running on Oxygen OS Open Beta 10.
PLEASE HELP. THANKS IN ADVANCE.
Which TWRP do you use? Personally, I recommend this one by codeworkx: https://sourceforge.net/projects/ch....1-0-20180309-codeworkx-dumpling.img/download
Some roms require you to be decrypted; others don't. Most roms require the latest firmware (5.1.3) to be flashed before the rom, gapps, etc. Read the installation instructions carefully. Use the recommended firmware and gapps package linked to the rom. Before you start flashing roms, you should wipe your phone in fastboot mode: fastboot format userdata. This will wipe your phone clean; all your data will be gone. So, backup all your data to your PC before proceeding. After format, reboot directly to TWRP and move your firmware, rom, gapps, etc. to internal storage; follow the flash order and procedures exactly as outlined for the rom you want to try.
I tried installing latest TWRP (3.2.1-2) for my OnePlus 5T but no luck. Please suggest.
KDPalekar said:
I tried installing latest TWRP (3.2.1-2) for my OnePlus 5T but no luck. Please suggest.
Click to expand...
Click to collapse
The link to a working TWRP is in the post above; it's not the latest or official TWRP, but it works. Also, please read through this thread if you haven't already: https://forum.xda-developers.com/oneplus-5t/how-to/oneplus-5t-unlock-bootloader-flash-twrp-t3704592.
Did you try to format data (after wiping the partitions) ?
bud7dha said:
The link to a working TWRP is in the post above; it's not the latest or official TWRP, but it works. Also, please read through this thread if you haven't already: https://forum.xda-developers.com/oneplus-5t/how-to/oneplus-5t-unlock-bootloader-flash-twrp-t3704592.
Click to expand...
Click to collapse
Read the whole instructions and installed it but no luck .
Zark0s said:
Did you try to format data (after wiping the partitions) ?
Click to expand...
Click to collapse
sorry.. i didn't get u.
KDPalekar said:
sorry.. i didn't get u.
Click to expand...
Click to collapse
In twrp, when you go in the wipe tab, there is a "format data" button. It will wipe the data and internal storage partitions and remove encryption. But don't worry, depending of the ROM you flash it will encrypt again.
Zark0s said:
In twrp, when you go in the wipe tab, there is a "format data" button. It will wipe the data partition and remove encryption. But don't worry, depending of the ROM you flash it will encrypt again.
Click to expand...
Click to collapse
so do i need to do that as well?
KDPalekar said:
so do i need to do that as well?
Click to expand...
Click to collapse
I format data everytime I do a clean flash lol, so yeah just give a try and let us know if it works ^^
Hi,
It worked. I format the data and install the clean flash. Thanks a lot. One more thing can u please suggest custom ROM with ANDROID P notification panel.
KDPalekar said:
Hi,
It worked. I format the data and install the clean flash. Thanks a lot. One more thing can u please suggest custom ROM with ANDROID P notification panel.
Click to expand...
Click to collapse
Idk if a custom rom exists with that feature but there is a xposed module which does that and works on any custom rom (aosp 8.1 based at least) : https://forum.xda-developers.com/xposed/modules/xposed-android-p-ify-features-t3764556
Zark0s said:
Idk if a custom rom exists with that feature but there is a xposed module which does that and works on any custom rom (aosp 8.1 based at least) : https://forum.xda-developers.com/xposed/modules/xposed-android-p-ify-features-t3764556
Click to expand...
Click to collapse
I installed the Lineage OS, rooted, installed the xposed module, installed the android P fy module but still I'm not getting the exact look like android p notification panel. Can you suggest me ROM that works fine with Android P-fy module to get the exact Android p notification panel.
Please find the attachment. This is what I'm getting with Lineage OS.
KDPalekar said:
I installed the Lineage OS, rooted, installed the xposed module, installed the android P fy module but still I'm not getting the exact look like android p notification panel. Can you suggest me ROM that works fine with Android P-fy module to get the exact Android p notification panel.
Please find the attachment. This is what I'm getting with Lineage OS.
Click to expand...
Click to collapse
Did you check the module settings ? You can tweak some stuff.
Or maybe it didn't works because of Lineage (but it should, idk why not), but you can try aosp extended, which is closer to aosp.
Zark0s said:
Did you check the module settings ? You can tweak some stuff.
Or maybe it didn't works because of Lineage (but it should, idk why not), but you can try aosp extended, which is closer to aosp.
Click to expand...
Click to collapse
I tried AOSP Extended before a week ago. Everything was working fine except headphone Jack. Sound was not coming in my earphones. Sound from speaker grill was coming, even I tried with connecting to Bluetooth speaker, that's also working fine. The only issue I had with that headphone Jack.
Please suggest if you have any solution for that then I'll surely try it again.
Thanks
Zark0s said:
Did you check the module settings ? You can tweak some stuff.
Or maybe it didn't works because of Lineage (but it should, idk why not), but you can try aosp extended, which is closer to aosp.
Click to expand...
Click to collapse
Oh. How unlucky I'm. I just checked the headphone Jack with this ROM. Here also headphone Jack is not working. This is very unlucky. Do have any solution for this?
KDPalekar said:
Oh. How unlucky I'm. I just checked the headphone Jack with this ROM. Here also headphone Jack is not working. This is very unlucky. Do have any solution for this?
Click to expand...
Click to collapse
I think you didn't flash the latest firmware available (5.1.3), which you can find here :
https://forum.xda-developers.com/showthread.php?t=3728665
Zark0s said:
I think you didn't flash the latest firmware available (5.1.3), which you can find here :
https://forum.xda-developers.com/showthread.php?t=3728665
Click to expand...
Click to collapse
Thanks a lot Buddy. Flashed the latest firmware and now headphone Jack is live more. Thank you do much Buddy.