Help! Can't install TWRP - HTC 10 Questions & Answers

I recently got a replacement HTC 10 unit from HTC. I am attempting to install TWRP on it, but am unable to.
I did the standard unlock method from HTCdev.com. Everything there worked fine and the device is unlocked.
I have downloaded multiple versions of the twrp.img but am having the same issue across the board. I can't figure out what is wrong, as I had no issues on my previous HTC 10 unit.
C:\HTC>fastboot flash recovery twrp.img
target reported max download size of 1579200000 bytes
sending 'recovery' (47708 KB)...
OKAY [ 2.668s]
writing 'recovery'...
(bootloader) HOSD CL#857212
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) Update partition OK
(bootloader) [email protected]
OKAY [ 3.074s]
finished. total time: 5.773s
Everything seems like it's fine, but when I try to boot into bootloader and then recovery it gives me the htc, this build is intended for develpment purposes... screen and then goes directly into the rom never loading TWRP.
I can't figure this out, as I never had any issue before. My device is updated with the latest US version.
Can anyone help?
Thanks

I was having the exact same issue and was literally typing the same post as you when I saw yours.
I found this link with the unofficial TWRP builds and flashed 3.0.3.3. That finally got me into TWRP. You'll still see the gray HTC letters with the red disclaimer, but wait a few seconds and it should boot into recovery.
Hopefully that helps.

yoderz said:
I was having the exact same issue and was literally typing the same post as you when I saw yours.
I found this link with the unofficial TWRP builds and flashed 3.0.3.3. That finally got me into TWRP. You'll still see the gray HTC letters with the red disclaimer, but wait a few seconds and it should boot into recovery.
Hopefully that helps.
Click to expand...
Click to collapse
That worked!
Thanks!

Related

Soft Brick Help Needed.. :(

I seem to have soft bricked my m9 hima while trying to go back to stock in order to update the firmware to the latest rev. (Yes, I have read the other threads, but I Think this might be a little more unique to my situation? )
I cannot get into my stock recovery, or my TWRP(which is what I used before).
Download mode appears to work.
I can't install TWRP with fastboot/adb, might be because device is S-on.
Tried running RUU, but says my device isn't compatible.
I would really appreciate anyones' input!
Nanometer45 said:
I seem to have soft bricked my m9 hima while trying to go back to stock in order to update the firmware to the latest rev. (Yes, I have read the other threads, but I Think this might be a little more unique to my situation? )
I cannot get into my stock recovery, or my TWRP(which is what I used before).
Download mode appears to work.
I can't install TWRP with fastboot/adb, might be because device is S-on.
Tried running RUU, but says my device isn't compatible.
I would really appreciate anyones' input!
Click to expand...
Click to collapse
Useful information that will help us help you:
CID (Carrier ID)
MID (Model ID)
Firmware version that you're currently on
Steps you took that led to your current situation
Like you said, this is a soft brick. Odds are good we can help.
---------- Post added at 04:39 PM ---------- Previous post was at 04:32 PM ----------
If you're new to ADB & fastboot, check out this thread
Once you've installed those:
- plug your phone into your computer while it is in download mode
- open a command prompt
- run the command "fastboot getvar all"
Phone is:
MID 0PJA11000
CID CWS__001
Firmware I tried to flash was this:
RUU_HIMA_UL_L51_SENSE70_ATT_MR_Cingular_US_2.11.502.18
It looks like the firmware update failed, but when the RUU program tries to read the firmware it now shows as the new one listed above.
I got to this point by trying to update the firmware. I had problems getting the new TWRP working, and I got impatient :-\
Make sure you double check the md5 hash and filesize of twrp before you flash it.
Sent from my HTC One M9 using Tapatalk
I tried flashing TWRP, and it seems to have taken it, but phone says it cannot boot intothe boot loader, it said that before I started running into soft brick issues i believe.
Try my copy https://drive.google.com/folderview?id=0B4vTiHTBB629QmxGTkpyZWlCR28
Sent from my HTC One M9 using Tapatalk
Which do you recommend, your twrp?
I know mine works..
Sent from my HTC One M9 using Tapatalk
Can't get it to flash:
C:\Program Files (x86)\ClockworkMod\Universal Adb Driver>fastboot flash recovery T1F.img
target reported max download size of 800000000 bytes
sending 'recovery' (30912 KB)...
OKAY [ 2.444s]
writing 'recovery'...
(bootloader) HOSD CL#591203
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) Update partition OK
(bootloader) [email protected]
OKAY [ 2.651s]
finished. total time: 5.096s
Says:
Failed to boot to recovery mode
Flash the twrp 2.9.0.1 in the link i gave. See what that does.
Sent from my HTC One M9 using Tapatalk
Nanometer45 said:
Can't get it to flash:
C:\Program Files (x86)\ClockworkMod\Universal Adb Driver>fastboot flash recovery T1F.img
target reported max download size of 800000000 bytes
sending 'recovery' (30912 KB)...
OKAY [ 2.444s]
writing 'recovery'...
(bootloader) HOSD CL#591203
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) Update partition OK
(bootloader) [email protected]
OKAY [ 2.651s]
finished. total time: 5.096s
Says:
Failed to boot to recovery mode
Click to expand...
Click to collapse
I'm pretty sure 2.9.x and later versions only work on MM, and you're on LP firmware. Try one of the 2.8.x versions from here: https://dl.twrp.me/hima/
Doesn't boot into TWRP. Maybe S-off is a problem.
Missed your post, I'll try an older build. Though I was running Cyanogenmod 13, so I don't see how that invited the problem. Doesn't hurt to try.
Older TWRP worked. Now I just need to get the latest firmware on it without android installed. Any tips?
Was able to finally get the RUU to take. Thanks for helping out. Is there no MM update for the ATT M9? That would explain some of the issues I was having. Only custom roms for options then.

No error at flashing TWRP, but can't boot into it

Bought Japan Variant HTC 10,
S-off, Bootloader Unlocked.
[flashed TWRP once and did Backup.]<-yeah i did
Changed CID to US Unlocked one and RUUed Android 7.0
All went great at this point.
Then I tried to flash TWRP again and now i just can't boot into it.
flashing went smoothly, at leat log says;
fastboot flash recovery twrp.img
target reported max download size of 1579200000 bytes
sending 'recovery' (21992 KB)...
OKAY [ 1.717s]
writing 'recovery'...
(bootloader) HOSD CL#831921
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) Update partition OK
(bootloader) [email protected]
OKAY [ 2.529s]
finished. total time: 4.249s
fastboot reboot-bootloader
AAAAAAAAAAAAAAAND I just can't boot into TWRP.
Phone just showing htc logo for a while and reboot to ROM.
So i tried fastboot boot twrp.img method, still not working.
download mode screen
Am I missing sth? like key combo to show twrp or bug at twrp 3.0.2.6?
I had the exact same problem, I solved it by flasing the twrp 3.0.3-0 unofficial version that you can find on the twrp recovery's thread
Edit: I don't know if this is the right way to do it, it worked for me but I'm new in the modding world and I'm not sure it will work for you too or if it's safe. Maybe is better to wait for someone that knows more than me.
solved
Since I did OTA from 2.28.617.8 to 2.38.617.6,
I googled and RUUed 2.38.617.6, not 2.28.617.8 from official HTC US hp.
and I flashed twrp 3.0.3.0 unofficial, instead of 3.0.2.6 official.
I don't know which one was critical, but everything went fluently.
Seems like 3.0.3.0 was the critical one.
Thx @fratorga100, for the reply.

Flash TWRP but never replaces original recovery

Hi
I have flashed the latest 3.1.1 TWRP to my son's phone successfully three times this morning, and when I reboot to download mode, twrp does not show, the original recovery shows instead. As you see below, it flashes fine, but somehow does not!!
On this TWRP website, it mentions "Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery."
But a search in Google results in me finding the page which tells me to look on Google! Does anyone know if this is "key combo" is how we have to flash TWRP properly? This phone is not rooted.
Tx
Mark.
D:\Android\android-sdk\platform-tools>fastboot flash recovery twrp.img
target reported max download size of 1579200000 bytes
sending 'recovery' (53680 KB)...
OKAY [ 2.946s]
writing 'recovery'...
(bootloader) HOSD CL#857212
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) Update partition OK
(bootloader) [email protected]
OKAY [ 3.232s]
finished. total time: 6.180s
fredphoesh said:
Hi
I have flashed the latest 3.1.1 TWRP to my son's phone successfully three times this morning, and when I reboot to download mode, twrp does not show, the original recovery shows instead. As you see below, it flashes fine, but somehow does not!!
On this TWRP website, it mentions "Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery."
But a search in Google results in me finding the page which tells me to look on Google! Does anyone know if this is "key combo" is how we have to flash TWRP properly? This phone is not rooted.
Tx
Mark.
D:\Android\android-sdk\platform-tools>fastboot flash recovery twrp.img
target reported max download size of 1579200000 bytes
sending 'recovery' (53680 KB)...
OKAY [ 2.946s]
writing 'recovery'...
(bootloader) HOSD CL#857212
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) Update partition OK
(bootloader) [email protected]
OKAY [ 3.232s]
finished. total time: 6.180s
Click to expand...
Click to collapse
Bootloader is unlocked? If not then you can't flash it. Or won't flash
Sent from my HTC 10 using XDA Labs
You can get to recovery from bootloader.
Ie. Vol down + power gets you to download mode, then select reboot bootloader, from the bootloader, select reboot recovery.
DeeZZ_NuuZZ said:
Bootloader is unlocked? If not then you can't flash it. Or won't flash
Sent from my HTC 10 using XDA Labs
Click to expand...
Click to collapse
Hi, yes unlocked.
Sent from my SM-N950F using Tapatalk

Recovery/System Bootloop - Fastboot Doesn't Flash

I am suffering from a bootloop in my phone, lineage suddenly decided to crash trebuchet, and phone turned off. Bootloader works, download mode works, recovery absolutely DOES NOT, It gives me the black HTC logo and turns off and on when I put the "fastboot oem lock" option, and just redirects back to the bootloop when I don't. I can use fastboot to flash files to it, I flashed TWRP old and new, but nonetheless, it bootloops when picking recovery once more. I have S-ON, with the bootloader unlocked. I'd love to buy the sunny license and turn S-OFF, but have no way of accessing my OS anymore.
Here are my details.
(bootloader) kernel: lk
(bootloader) product: htc_himawhl
(bootloader) version: 1.0
(bootloader) version-main: 3.41.651.4
(bootloader) boot-mode: download
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 0PJA20000
(bootloader) cid: SPCS_001
Here is my recovery flashing log
target reported max download size of 800000000 bytes
sending 'recovery' (20084 KB)...
OKAY [ 2.097s]
writing 'recovery'...
(bootloader) HOSD CL#695981
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) Update partition OK
(bootloader) [email protected]
OKAY [ 1.838s]
finished. total time: 3.939s
I've tried flashing a signed stock ROM, but I know I need to re-lock the bootloader, the "fastboot oem lock" option doesn't work too well either, it just resets without actually locking anything. It can't hold a flash it seems.
(bootloader) [KillSwitch] : /dev/block/bootdevice/by-name/frp (bootloader) [KillSwitch] Last Byte is 0X01, enable unlock (bootloader) RELOCK device
I've tried the "0PJAIMG.zip" method in download mode, but it just gives me these errors as well.
22 RU_HEADER_ERROR
22 RU_HEADER_ERROR
FAIL22 RU_HEADER_ERROR
If my phone gets a file that matches up, it freezes for a bit, THEN goes back to another bootloop. It's frustrating.
9 RU_SECURITY_FAIL is also another error I get when trying to flash the .zip by fastboot, they're so annoying.
target reported max download size of 800000000 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 2136250206 is not a multiple of the block size 4096
sending sparse 'zip' 1/1 (0 KB)...
error: write_sparse_skip_chunk: don't care size 2136250206 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 2136250206 is not a multiple of the block size 4096
OKAY [ 1.028s]
writing 'zip' 1/1...
(bootloader) HOSD CL#695981
FAILED (remote: 9 RU_SECURITY_FAIL zip from usb command in download mode)
finished. total time: 2.053s
Then after that, I tried flashing "0PJAIMG_HIMA_WHL_L50_SENSE70_SPCS_Sprint_WWE_1.32.651.17_Radio_1.10.C1144022_50312.5_NV_SPCS_0.23_003_release_425355_signed_RYDAH805.zip" via download mode with the SD card, and it gave me a FAIL19 RU_MAIN_VER_FAIL error that I don't understand that well, but I did find a reddit thread on it. I may have messed up my partitions.
https://www.reddit.com/r/AndroidQuestions/comments/69i53h/help_with_htc_m9_fail19_ru_main_ver_fail/
HOSD is also yet another method that ends up in failure
sending 'hosd' (38148 KB)... OKAY
writing 'hosd'... (bootloader) HOSD CL#695981
FAIL35 RU_PARTITION_NOT_SUPPORT hosd
FAILED (remote: 35 RU_PARTITION_NOT_SUPPORT hosd)
Execution time is 4(s)
Here are a list of things that DIDN'T work
-Firmware Flashing
-Boot/TWRP Flashing
-fastboot oem unlock
-the "Power then Volume up" trick, it just redirects me to a white HTC splash screeen
-Recovery from bootloader option
-signed .img files
https://androidforums.com/threads/htc-one-m8-brick-stuck-on-boot.927336/
After finding the thread above, I'm starting to think it might be a hardware error, it now gives me a "Failed to boot to recovery mode" error,. The eMMc may be messed up, ughhhhhhhh
Any way to recover my files, at least? If anyone here has any clues on getting my phone to working condition, I'd appreciate it a ton, hell, I might even pay you for helping me, better than losing all my data!
Will add as much info as possible and update my current status if asked.
Stop before you break it.
Find the official stock signed firmware ruu in .zip format that matches your current firmware. Ie 3.41.651.x (x can be any number but the other 3 octets MUST MATCH). Rename it to 0PJAIMG.ZIP and copy to the external sdcard.
DO NOT relock/lock the bootloader and DO NOT s-on.
Boot to download mode (Black screen red writing) and at the bottom, in yellow text, you should see "press vol up to flash"..
shivadow said:
Stop before you break it.
DO NOT relock/lock the bootloader and DO NOT s-on.
Boot to download mode (Black screen red writing) and at the bottom, in yellow text, you should see "press vol up to flash"..
Click to expand...
Click to collapse
That's unfortunately the issue, I AM S-On, never turned it off, which has pretty much sealed this poor phones fate I assume. If not, I'm betting I would have already flashed a no wipe .zip successfully. It's a shame, since this could have been prevented if I knew this phone was prevalent to system corruption, now the only thing I can depend on is obtaining a compatible recovery, since mine isn't working, download/fastboot is the only thing I have now.
It also seems I cannot find the "RUU_HIMA_WHL_M60_SENSE70_SPCS_MR_Sprint_WWE_3.41.651.4.zip" over the web, would an .exe work if I rename the extension as .zip?
S-on or s-off doesn't matter. What i meant is if you go s-off there is no need to ever s-on again. Same for bootloader. If it's unlocked then you don't ever need to lock/relock it.
Exe or zip but sometimes exe fails. Exe must be run on a pc and have the phone connected via USB. Zip must be run from external sdcard. It MUST be that version regardless.
Your only way without buggering it further is to flash the stock firmware. It will replace the recovery etc itself and will be safer than messing around with it, if it flashes OK.
shivadow said:
S-on or s-off doesn't matter. What i meant is if you go s-off there is no need to ever s-on again. Same for bootloader. If it's unlocked then you don't ever need to lock/relock it.
.
Click to expand...
Click to collapse
Then I'm assuming the correct fw "0PJAIMG.zip" would flash successfully even with an unlocked bootloader?
RebeccaSugar said:
Then I'm assuming the correct fw "0PJAIMG.zip" would flash successfully even with an unlocked bootloader?
Click to expand...
Click to collapse
Correct.
If you prefer the *.zip over the *.exe then take a look at the "further reading" section of the ReadMe thread. There's a link to a decryption tool. Download the correct version for your computer. If you use windows, you can drag and drop the *.exe onto the decryption tool and it will extract the *.zip for you. On Linux and Mac you'll probably need to use some commands.
Sent from my HTC One M9 using XDA Labs
Flippy498 said:
Correct.
If you prefer the *.zip over the *.exe then take a look at the "further reading" section of the ReadMe thread. There's a link to a decryption tool. Download the correct version for your computer. If you use windows, you can drag and drop the *.exe onto the decryption tool and it will extract the *.zip for you. On Linux and Mac you'll probably need to use some commands.
Sent from my HTC One M9 using XDA Labs
Click to expand...
Click to collapse
Done, though, after doing the "0PJAIMG.zip" method once more, it interrupts the flash with a very fast error(?) message highlighted in white then quickly reverts to bootlooping the recovery splash screen (Black Background with Silver HTC Logo)
I decided to flash the boot.img and system.img
target reported max download size of 800000000 bytes
sending 'recovery' (20084 KB)...
OKAY [ 2.097s]
writing 'recovery'...
(bootloader) HOSD CL#695981
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) Update partition OK
(bootloader) [email protected]
OKAY [ 1.838s]
finished. total time: 3.939s
(bootloader) kernel: lk
(bootloader) product: htc_himawhl
(bootloader) version: 1.0
(bootloader) imei: 990005027515833
(bootloader) version-main: 3.41.651.4
(bootloader) boot-mode: download
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 0PJA20000
(bootloader) cid: SPCS_001
C:\Users\Infinity>Documents\Pack\fastboot.exe flash system C:\Users\Infinity\Documents\James\HTC\OUT_0PJA_3.41.651.21\system\system.img
target reported max download size of 800000000 bytes
Invalid sparse file format at header magi
erasing 'system'...
OKAY [ 0.232s]
sending sparse 'system' 1/6 (743090 KB)...
OKAY [ 40.331s]
writing 'system' 1/6...
(bootloader) HOSD CL#695981
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) Update partition OK
(bootloader) [email protected]
OKAY [ 28.653s]
sending sparse 'system' 2/6 (725823 KB)...
OKAY [ 39.600s]
writing 'system' 2/6...
(bootloader) HOSD CL#695981
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) Update partition OK
(bootloader) [email protected]
OKAY [ 27.937s]
sending sparse 'system' 3/6 (776453 KB)...
OKAY [ 42.390s]
writing 'system' 3/6...
(bootloader) HOSD CL#695981
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) Update partition OK
(bootloader) [email protected]
OKAY [ 30.090s]
sending sparse 'system' 4/6 (764994 KB)...
OKAY [ 41.446s]
writing 'system' 4/6...
(bootloader) HOSD CL#695981
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) Update partition OK
(bootloader) [email protected]
OKAY [ 30.371s]
sending sparse 'system' 5/6 (775925 KB)...
OKAY [ 42.348s]
writing 'system' 5/6...
(bootloader) HOSD CL#695981
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) Update partition OK
(bootloader) [email protected]
OKAY [ 29.562s]
sending sparse 'system' 6/6 (546809 KB)...
OKAY [ 31.210s]
writing 'system' 6/6...
(bootloader) HOSD CL#695981
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) Update partition OK
(bootloader) [email protected]
OKAY [ 21.738s]
finished. total time: 405.943s
They were successful, apparently, but I've seen no changes. When booting, it just hangs on the white splash screen with the green htc logo and the "This build is for development, etc" warning.
If only I had a way to boot a working recovery, the more I do this, the more it seems like it is without a shadow of a doubt, a hardware problem.
Here are some logs, the fw seems to match up with my phone just fine, nonetheles...
View attachment RUU_Decrypt_LOG-0PJA20000_3.41.651.21_2018-04-01_025319.txt
View attachment android-info.txt
View attachment android-info2.txt
View attachment backup_android-info.txt
I noticed that you used fastboot. Be aware that flashing RUUs isn't possible with the generic fastboot files. You'll need htc_fastboot. A download link can be found in the RUU section of the ReadMe thread.
Are you sure that the SD card isn't broken? (Never use old cards for flashing RUUs. They can corrupt the files.) Did you try another one? Normally the extracted *.zip should flash just fine via an SD card.
I'd try a different SD card and flashing the RUU via htc_fastboot. (Flashing only the system and the boot.img might not be sufficient.) If both methods fail then the phone's hardware is most probably damaged and there's nothing you could do.
Sent from my HTC One M9 using XDA Labs
Flippy498 said:
I noticed that you used fastboot. Be aware that flashing RUUs isn't possible with the generic fastboot files. You'll need htc_fastboot. A download link can be found in the RUU section of the ReadMe thread.
Are you sure that the SD card isn't broken? (Never use old cards for flashing RUUs. They can corrupt the files.) Did you try another one? Normally the extracted *.zip should flash just fine via an SD card.
I'd try a different SD card and flashing the RUU via htc_fastboot. (Flashing only the system and the boot.img might not be sufficient.) If both methods fail then the phone's hardware is most probably damaged and there's nothing you could do.
Sent from my HTC One M9 using XDA Labs
Click to expand...
Click to collapse
I used a different SD card, formatted it to fat32 then exFAT, and nothing happened, it just gave me another error and rebooted. Though, after the reboot I manually booted the download mode and the same happened. Except this time, it gave me a list of all the .img files at 0% inside the "0PJAIMG.zip" before abruptly shutting off.
I took your advice on using the manual htc_fastboot to flash the "0PJAIMG.zip", even with the powershell, and it still fails.
htc_fastboot v3.0.9.2 (2015-05-29)
target rom version: 3.41.651.21
found large-zip header, file count: 8
processing file 1/8...
sending 'zip' (88845 KB)...
OKAY [ 5.992s]
writing 'zip'...
(bootloader) HOSD CL#695981
FAILED (remote: 9 RU_SECURITY_FAIL zip from usb command in download mode)
finished. total time: 7.195s
htc_fastboot finished. total time: 8.782s
I did a bit of spelunking and came across this users post, that had the same issue as I.
repl1ca said:
Ok...so hopefully I didn't foobar something. I went to go back to stock since I'm returning my phone soon (1 year lease), so I relocked my bootloader before trying to flash the RUU (I'm S-ON by the way). Relock went fine, but the phone immediately returned to the bootloader with a "*** Security Warning***" message and now the phone won't boot into the ROM or recovery. I tried booting into download mode and flashing the RUU zip, but I am getting the following message:
Code:
C:\Program Files (x86)\Android\android-sdk\platform-tools>fastboot flash zip d:\downloads\0PJAIMG.zip
target reported max download size of 800000000 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 2330284468 is not a multiple of the block size 4096
sending sparse 'zip' (0 KB)...
error: write_sparse_skip_chunk: don't care size 2330284468 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 2330284468 is not a multiple of the block size 4096
OKAY [ 1.015s]
writing 'zip'...
(bootloader) HOSD CL#695981
FAILED (remote: 9 RU_SECURITY_FAIL zip from usb command in download mode)
finished. total time: 2.017s
I also tried running the RUU exe in download mode, but that didn't work either.
Hopefully I am doing something wrong and didn't mess the phone up! I will be forever in debt to whoever can help me.
P.S. - I also tried unlocking the bootloader again but that is failing as well!! (Even though it says successful...)
_____________________________________________________________________________
EDIT: Ok, so I gave my Windows account full access to the platform-tools folder (which includes fastboot and the unlock token) and tried unlocking again, and it worked?! ROM is booting now, but how do I avoid having this happen again and return to stock? TIA
Click to expand...
Click to collapse
What did he mean by "Full Access to the platform-tools folder"? That may be my meal ticket to getting my phone working or nothing else.
You have to go into Windows Explorer on your computer and find the platform-tools folder. Once you find it, right click on it and go to Properties, then the Security tab. On that tab, add your Windows username in there and make sure the Full Access box is checked. Hit Apply, then OK.
My post is really old, so I'm having a hard time remembering what the actual issue was [emoji23]
Sent from my SM-G965U using Tapatalk
Security fail means the ruu is corrupt. Remote:9 I think is unsigned ruu. You need to be flashing a signed ruu.zip.
shivadow said:
Security fail means the ruu is corrupt. Remote:9 I think is unsigned ruu. You need to be flashing a signed ruu.zip.
Click to expand...
Click to collapse
That's what bothers me the most, the ruu I have IS signed, you sure I don't need S-OFF, or to lock the bootloader?
Security or bootloader make no odds. If you had s-off life would probably be easier..
Exactly which file are you flashing? Have you checked the md5 hash?
shivadow said:
Security or bootloader make no odds. If you had s-off life would probably be easier..
Exactly which file are you flashing? Have you checked the md5 hash?
Click to expand...
Click to collapse
I'll probably buy the XTC 2 Clip chip thing needed to manually turn S-OFF, I don't care about paying a little extra, as long as I can recover all my files in the phone.
I am flashing a "3.41.651.21" .zip from extracted from "RUU_HIMA_WHL_M60_SENSE70_SPCS_MR_Sprint_WWE_3.41.651.21.exe"
The MD5 hash for it is "f41f1b941eb3f9f9ecaebcbf235e87af"
Which looking up the hash reveals to be the version for my exact same hardware, kernel and software version
https://androidfilehost.com/?fid=312978532265363975
I'm more than confident S-OFF is the only way to fix it. Unless there are cases of android bricking, even with a working fastboot. Something, a type of security, is preventing files from being read/flashed, unless It's an eMMc error. Two verdicts now.
You most probably won't be able to recover any files at this point. Flashing a RUU will delete everything that's stored on your phone. Even S-OFF won't change that. S-OFF will only enable downgrading with older RUUs. Converting the phone isn't recommended unless you're willing to risk getting a paperweight since it's a CDMA device.
I haven't seen error 9 before I read about it in this thread. Since you already tried different methods and the md5 checksum of your manually extracted RUU seems to match the one of the AFH RUU, chances are high that the phone's hardware is broken.
Sorry for the bad news.
Sent from my HTC One M9 using XDA Labs
Flippy498 said:
You most probably won't be able to recover any files at this point. Flashing a RUU will delete everything that's stored on your phone. Even S-OFF won't change that. S-OFF will only enable downgrading with older RUUs. Converting the phone isn't recommended unless you're willing to risk getting a paperweight since it's a CDMA device.
Click to expand...
Click to collapse
At this point, it's already a paperweight, what's an extra $100 invested on the XTC 2 Clip going to do? Haha! If I can't recover the files, I'll just make an attempt at salvaging this phone and giving it away to someone else.
Flippy498 said:
I haven't seen error 9 before I read about it in this thread. Since you already tried different methods and the md5 checksum of your manually extracted RUU seems to match the one of the AFH RUU, chances are high that the phone's hardware is broken..
Click to expand...
Click to collapse
That IS a fear, especially about hearing about the "horrors" of the Hynix eMMc from people in the the thread I linked in the OP, and others in gsmhosting, this device might have just been another victim of faulty circuitry, which actually has me steamed.
http://forum.gsmhosting.com/vbb/f961/htc-one-m9-bootloop-2214236/#3
This is going to be my brave (read: foolish) attempt.
The biggest problem of the M9 is the Snapdragon 810 processor. Although later firmware revisions fixed the overheating (more or less) the heat damages that emerged from to the usage of older firmware versions aren't fixable.
Most phones that got sold with this processor suffer from similar issues, sooner or later. If you check the xda forums from other 2015 flagship devices with the SD810 you'll see that they all have some kind of sudden bootloop death problem.
And as said before, getting S-OFF won't change your situation. If you really want to try a method that has a slightly chance of being successful you should search for a jtag device like e.g. a riff-box. The thing is I personally don't have any experiences with jtagging. I only know that it can still help in situations in which there already seems to be no hope, anymore. Check sneakyghost's firmware thread in the development section. If I remember correctly, post #5 contains info or at least a link with further info about the topic. Be aware that these devices can be quite expensive.
Sent from my HTC One M9 using XDA Labs
Flippy498 said:
The biggest problem of the M9 is the Snapdragon 810 processor. Although later firmware revisions fixed the overheating (more or less) the heat damages that emerged from to the usage of older firmware versions aren't fixable.
Most phones that got sold with this processor suffer from similar issues, sooner or later. If you check the xda forums from other 2015 flagship devices with the SD810 you'll see that they all have some kind of sudden bootloop death problem.
Click to expand...
Click to collapse
I've heard things like that before! It shorts out the board or something above those lines, if heating is an issue, then it certainly did that to mine, which may be the fault of the missing recovery and bootloop, along with one crash I remember! Yes, I remembered I had one crash, the screen had all sorts of garbled colorful static on it and the phone made a beeping noise, why didn't I remember that!? I'm an idiot. That should have been a clear warning to back up everything, I should have reminded myself of the issues with the 810 Processor. Whether the crash months earlier had anything to do with what might have either been a sign of decay, or just a coincidence is beyond me, but knowing my current position with this phone, I'll go with the former.
Flippy498 said:
And as said before, getting S-OFF won't change your situation. If you really want to try a method that has a slightly chance of being successful you should search for a jtag device like e.g. a riff-box. The thing is I personally don't have any experiences with jtagging. I only know that it can still help in situations in which there already seems to be no hope, anymore. Check sneakyghost's firmware thread in the development section. If I remember correctly, post #5 contains info or at least a link with further info about the topic. Be aware that these devices can be quite expensive.
Click to expand...
Click to collapse
Lucky for you (and me) I do! I've successfully soldered about 5 things in the past, so this phone should be familiar territory! I just cancelled the XTC 2 Clip order, and instead ordered myself a Riff Box, I saw that it supports my HTC 9, and I thank you for telling me this! I work much better under hardware than software (Thanks ADHD), I'll check out. I immensely appreciate your help, and you taking time out of your day to give me sources, it truly, honestly means a lot. The device is around $120, not horribly expensive, my wallet can take it, I'll update you on my progress later in the thread! Thanks again!
Woah, apparently I don't NEED to solder? Well, this just makes it easier I'd say! BUT, I don't trust myself enough to risk destroying the sensitive data inside my device, so I will e-mail Tecardo and offer him a price for helping me instead. Can't trust myself enough not to screw up!
Oh, only 120 bucks? Don't ask me why but I had a higher price in mind. Either my mind betrayed me or the riff box got cheaper...
Sent from my HTC One M9 using XDA Labs
Flippy498 said:
Oh, only 120 bucks? Don't ask me why but I had a higher price in mind. Either my mind betrayed me or the riff box got cheaper...
Click to expand...
Click to collapse
Well, in your defense, there ARE bundles that are priced ridiculously high (In the $500's for some damned reason) even though you can get the same bundles separately, for less than half of what they ask.

TWRP 3.3.1-0 stuck on logo

Hello,
I have some problem on my phone (AOSP 9) but I didn't know why (I didn't download any new apps, last thing was Magisk update). Now more than the half of the apps don't work, battery drain very fast and I can't restart and shutdown the phone (or I need to do soft reset).
I tried to do a factory reset directly from Android but it doesn't work.
I tried to flash TWRP and and I got this message.
Code:
Y:\Download>fastboot flash recovery twrp.img
(bootloader) has-slot:recovery: not found
(bootloader) is-logical:recovery: not found
Sending 'recovery' (15864 KB) OKAY [ 0.512s]
Writing 'recovery' (bootloader) Image not signed or corrupt
OKAY [ 0.204s]
Finished. Total time: 0.919s
According to other subjects it's not a big deal so I decided to restart in bootloader but now I'm stuck on TWRP logo. I waited more than 1h30 and nothing happens.
Have you got an idea ?
Thank you
Do a clean flash of the stock ROM.
Thank you, it works, and I was able to reinstall AOSP.
Thank you again

Categories

Resources