Hello i've a problem with digitized, 1 CM from top of the screen didn't respond for any touch, im allready install OTA of nougat manually and make a factory reset, now I can't click to recover my contacts, and sort apps list in main menu from alphabetic order, and little more problem... In settings menu I can turn back my phone and that's solved problem cause screen is rotated, but not in contacts and main app menu, I tried to install some difrent launcher but still didn't rotate main menu and contacts, any solution anyone?
Rogeroo said:
Hello i've a problem with digitized, 1 CM from top of the screen didn't respond for any touch, im allready install OTA of nougat manually and make a factory reset, now I can't click to recover my contacts, and sort apps list in main menu from alphabetic order, and little more problem... In settings menu I can turn back my phone and that's solved problem cause screen is rotated, but not in contacts and main app menu, I tried to install some difrent launcher but still didn't rotate main menu and contacts, any solution anyone?
Click to expand...
Click to collapse
I had this same issue. I ended up with a warranty replacement because it is a hardware issue. The first replacement I got actually had the same issue, but it was even worse. It was the entire top inch and a half of the screen. The second replacement I got was good to go.
I think about that, but i've a little crack screen in the corner on top so im thinking they told me that is my fold, or im wrong and they change my screen ? I can see that not only my problem
Same issue, my previous phone was overheating in the top part of the phone which killed the digitizer at the end. You need a replacement phone
Sent from my HTC6545LVW using Tapatalk
Related
Has anyone else had the problem with the Tilt 2 freezing when locking the phone? It doesn't happen all the time; but every so often, it freezes on me and I have to reset the phone to get it to work again. I haven't come across a solid answer for why it does this, so in the meantime I've reverted the locking mechanism to the Windows classic version, not the Windows default version that comes set on the phone. I do like the idea of the sliding unlocking mechanism, but I don't want to deal with the freezing. Is there a fix for this problem?
You are not the only one. I was wondering if it was S2U2.
I have been leaving my phone unplugged over night the past two nights to get a feel for the battery life. When I go to wake the phone in the morning it was either a blank screen or just the title bar before it froze. I had to reset to get the phone to work again.
thex said:
You are not the only one. I was wondering if it was S2U2.
I have been leaving my phone unplugged over night the past two nights to get a feel for the battery life. When I go to wake the phone in the morning it was either a blank screen or just the title bar before it froze. I had to reset to get the phone to work again.
Click to expand...
Click to collapse
I've had bad experiences with S2U2. I had installed S2U2 on my 8525, and I ended up having to do a hard reset. One day, after having to power down and restart the phone, it just wouldn't load. It got stuck in start-up mode. I don't plan to use S2U2 again. I'm not sure if the slide mechanism that comes standard with the Tilt 2 is related to S2U2 or not...
I am wondering if it is a conflict between the NEW WM lock slider and S2U2. I have a corporate exchange, so I have to use the PIN access.
I have the PIN set to appear in one hour if not in use. However, when using the WM slide locker, it ALWAYS reveals the PIN pad. If the PIN access did not appear after every WM slide locker, I would use it.
I changed the settings in for the WM lock to use the classic - thus eliminating the WM slide to unlock.
I will leave it OFF the charger tonight and let you know the results tomorrow.
Switching to WM Classic for the lock screen seems to work.
The screen did not freeze when I went to turn off the alarm this morning.
So the solution to use S2U2 is to change the Lock screen on your device from Default to Classic.
thex said:
Switching to WM Classic for the lock screen seems to work.
The screen did not freeze when I went to turn off the alarm this morning.
So the solution to use S2U2 is to change the Lock screen on your device from Default to Classic.
Click to expand...
Click to collapse
Thanks for the follow-up. Yeah, I've done the same thing: switched from default to classic. Thanks again.
Screen Unlock Freezes on Tilt 2
I too had this problem right out of the box. I switched to the Windows Classic as prescribed. However, this prompted me to get out the hand held drill and put a small hole right in the side of the back cover. I found myself having to battle the back cover every time I needed to soft reset, plus I noted the stylus needed to be removed to properly seat the back cover upon reinstall. Now I simply pull out my stylus and stick it in my hole. STOP IT!
Buzz
Formerly MDA / Wing / Tilt... and now Tilt 2
Always AT&T
Screen Unlock Freezes on Tilt 2
I just recently purchased the HTC Tilt 2 from AT&T on 02/15/2010 and for a few times I can successfully use the screen lock and unlock feature but then it stops working and I have to go press the soft reset button. This is constantly a problem now. When I try to go and unlock my phone it allows me to move the little lock icon to the left or right but the screen remains locked.
I appreciate the suggestions to dumb down to the Classic mode but this is not acceptable for a brand new device. I hope HTC comes out with a hotfix for this soon! We need to make this issue known to HTC so they can begin debugging immediately. Or do I have a defective phone and I need to return my phone?
southOCTilt2user said:
I just recently purchased the HTC Tilt 2 from AT&T on 02/15/2010 and for a few times I can successfully use the screen lock and unlock feature but then it stops working and I have to go press the soft reset button. This is constantly a problem now. When I try to go and unlock my phone it allows me to move the little lock icon to the left or right but the screen remains locked.
I appreciate the suggestions to dumb down to the Classic mode but this is not acceptable for a brand new device. I hope HTC comes out with a hotfix for this soon! We need to make this issue known to HTC so they can begin debugging immediately. Or do I have a defective phone and I need to return my phone?
Click to expand...
Click to collapse
I have seen a post similar to this pop up multiple times in the past month. This guy was specifically having problems with his mail client.
http://forum.xda-developers.com/showthread.php?t=634213
Personally I have only experienced this issue when the phone was next to my engine getting 400° temps blasted on it. Its hard to say the actual cause of the problem, but it seems in ideal situations (no 2000 e-mails or excessive heat) my phone is free of any freezing or strange behavior.
*edit*
also at the end of that post another user posted a work around that seems to be helping.
southOCTilt2user said:
I just recently purchased the HTC Tilt 2 from AT&T on 02/15/2010 and for a few times I can successfully use the screen lock and unlock feature but then it stops working and I have to go press the soft reset button. This is constantly a problem now. When I try to go and unlock my phone it allows me to move the little lock icon to the left or right but the screen remains locked.
I appreciate the suggestions to dumb down to the Classic mode but this is not acceptable for a brand new device. I hope HTC comes out with a hotfix for this soon! We need to make this issue known to HTC so they can begin debugging immediately. Or do I have a defective phone and I need to return my phone?
Click to expand...
Click to collapse
After returning my first HTC Tilt 2 phone and I got a second one, I got the same problem again.
I think I found the screen lock bug for the HTC Tilt 2 that I am able to reproduce. The problem is when I enable the Owner Information [Identification information or Notes] to display when the device is turned on and then try to slide the lock icon it will not unlock the phone.
HTC, please look into fixing this bug. Thanks!
Here are the steps to reproduce the problem:
1. Press the Windows logo start key (the second key on the bottom of your phone).
2. Choose Settings.
3. Choose Personal.
4. Choose Owner Information.
5. I populated everything on the Identification tab as well as a note to contact me on the Notes tab.
6. Choose the Options tab.
7. Check mark either the Identification information box or the Notes box.
8. Click OK
9. Now lock your phone by holding down the end call button.
10. Power off your phone.
11. Power on your phone.
12. Try to unlock your phone right away by sliding the lock all the way left or right.
13. You can slide the lock icon all you want but you will never get to unlock your phone.
14. You now need to soft reset your phone by taking the back cover off and using the stylus to press the side reset button. :-(
I hope this makes it into a downloadable bug fix. In the meantime, I have disabled (unchecked) any Owner Info notifications on device power up. I really miss having this on device power up as my old 7 year old Nokia phone was able to do that without a problem.
Hi,
I updated the Samsung firmware/software (or whatever it's called) today from 4.1.2 to 4.2.2 Kernel 3.0.31-2212686.
I have noticed a couple of niggling little differences in the operation of my phone and am wondering how to change these back to the way they were BEFORE I updated.
1) When typing my PIN code on the lock screen, the phone vibrates. It never used to. How do I change it back?
2) When I receive a text message, I now get a preview of the message on my lock screen. I never used to get those either. How do I change it back?
Any help would be much appreciated.
Thanks.
rockinrob said:
Hi,
I updated the Samsung firmware/software (or whatever it's called) today from 4.1.2 to 4.2.2 Kernel 3.0.31-2212686.
I have noticed a couple of niggling little differences in the operation of my phone and am wondering how to change these back to the way they were BEFORE I updated.
1) When typing my PIN code on the lock screen, the phone vibrates. It never used to. How do I change it back?
2) When I receive a text message, I now get a preview of the message on my lock screen. I never used to get those either. How do I change it back?
Any help would be much appreciated.
Thanks.
Click to expand...
Click to collapse
just keep playing with the setting.. once you found it you can disable all of it
bloxxzone said:
just keep playing with the setting.. once you found it you can disable all of it
Click to expand...
Click to collapse
I've been playing and playing and playing with the settings. I can't find the ones that enable me to do this. Help! (Please? Someone?)
Going to messages then touch menu button and select settings
Sent from my GT-N7100 using xda app-developers app
rockinrob said:
Hi,
I updated the Samsung firmware/software (or whatever it's called) today from 4.1.2 to 4.2.2 Kernel 3.0.31-2212686.
I have noticed a couple of niggling little differences in the operation of my phone and am wondering how to change these back to the way they were BEFORE I updated.
1) When typing my PIN code on the lock screen, the phone vibrates. It never used to. How do I change it back?
2) When I receive a text message, I now get a preview of the message on my lock screen. I never used to get those either. How do I change it back?
Any help would be much appreciated.
Thanks.
Click to expand...
Click to collapse
Go to Settings and disable Vibrate on touch.
To remove previewing message, go to settings from inbox and by the end you can uncheck preview messages,
DMJoh said:
Go to Settings and disable Vibrate on touch.
To remove previewing message, go to settings from inbox and by the end you can uncheck preview messages,
Click to expand...
Click to collapse
Hi DMJoh, and thanks for your input.
I did finally find the setting to undo the preview messages, so ... YES!! Thanks for that! Much appreciated.
Unfortunately, I'm not finding the Vibrate on Touch setting. The update seems to have changed about all my settings and put them into four categories: Connections, My Device, Accounts, ...More, with subcategories under each main category.
I cannot find the Vibrate on Touch setting anywhere. I even looked under My Device/Lock Screen as I thought the settings would be there what with all the vibrating happening on the lock screen, but it is not there, either.
Any ideas? Thanks
rockinrob said:
Hi DMJoh, and thanks for your input.
I did finally find the setting to undo the preview messages, so ... YES!! Thanks for that! Much appreciated.
Unfortunately, I'm not finding the Vibrate on Touch setting. The update seems to have changed about all my settings and put them into four categories: Connections, My Device, Accounts, ...More, with subcategories under each main category.
I cannot find the Vibrate on Touch setting anywhere. I even looked under My Device/Lock Screen as I thought the settings would be there what with all the vibrating happening on the lock screen, but it is not there, either.
Any ideas? Thanks
Click to expand...
Click to collapse
Actually, what you mentioned is your phone vibrates when you touch keypad for entering PIN code to unlock right, actually this is not happenong with me.i tried it in an older 4.2.2, if u are on the latest B1 update, i am not sure how it works, i reverted back from B1 as its almost stuck all the time in my phone, if its okay with you try a factory reset, but am not sure this will solve your problem.
So i just got my phone back from service. I had a white spot on the screen. They fixed it by replacing the motherboard. It'll all fine and dandy right there. But i noticed i could not pull down the notification bar in potrait mode. While switching to landscape it works. This sounds like a hardware issue but im not sure. Is there a way to test the screen?... if a move a widget to the top of the screen from my homescreen. The screen detects it's up there.. so i guess the touch is ok?
The service took about 4 weeks so i hope i don't have to send it in again
I've tried resetting the phone (clean install)
UPDATE: Sent it back for another 4 weeks of service..
Hello
To make a touch screen test follow these steps:
1- open the phone dialer and dial this number *#*#3421#*#*
2- Choose accept, that will take you to a hardware test page
3- Choose touch screen line draw test.
Thank you
i have the same issues its software and gets fixed automatically
but there should be a solution
I just received my brand new HTC 10 today and I have the exact same problem as you.
I am unable to pull the notifications bar after I unlocked the phone in portrait mode. However I can pull the notifications bar while the phone is still locked AND when the phone is unlocked and rotated to landscape mode.
I have tried factory resetting my phone and upgrading to the latest software but the problem still persists.
What should I do?
Anyone solved this problem?
DaveedDB said:
Anyone solved this problem?
Click to expand...
Click to collapse
It's a screen issue. Do a line sensor test from the help app
What a difference a day makes. Yesterday my rad new Xtrons Android headunit was working almost* fine and today, after following conventional wisdom and letting my 15yo nephew pimp it, it's in all sorts of...well fckd.
Keen on some help from the collective wisdom. Before anyone helpfully suggests a factory reset... well, that's been done, sooo many times. When your nephew CHANGES the factory settings, it becomes a cycle of hell.
Unit is an Xtrons PB86MTVP. 8" HD, Android 6.0' Octa-Core 64bit 32GB.
Current main problem is that the touch screen inputs are reverse and diagonally opposed. What the hell do I mean by that? If I want to type on the qwerty keyboard or simply tap an icon, I have to use my cunning and hit an area or button diagonal and opposite for it to work. If I can get past this issue then maybe I can move to the next one which is that the unit doesnt power on/off with the ignition.
To be clear, things tried (multiple times in some cases) include
Reset via reset button
reset via software app section
undoing car battery
pulling unit back out and disconnecting
turning on and off again
swearing
So, who can help? got a silver bullet?
TIA
Joe
You could go to settings start right down the line set your home screen back and you should have a setting there for different keyboards also that should get yoy back to normal
Sent from my LG-TP260 using Tapatalk
djkeylenux said:
You could go to settings start right down the line set your home screen back and you should have a setting there for different keyboards also that should get yoy back to normal
Sent from my LG-TP260 using Tapatalk
Click to expand...
Click to collapse
thanks for the reply djkeylenux. I've got the right keyboard though, thats not the problem. the problem is the touch input on the screen, no matter which screen I'm on.
Well beside calibrate witch I thing you tried you could also go to developer options take a kook at running process see if there's something running causing the problem,
I think you lost the MCU settings.
Go to settings and then into Factory Settings menu. Password is 126.
Then in keys tab re-calibrate the screen. During calibration you will first see a "+1" in one of the corners. Tap it with your finger. Then in opposite corner "+2" will appear. Tap it too. Then accept and apply ypir settings and the unit will reboot. The touchscreen will work correctly then
In the same screen you can also re-configure the touch buttons and physical buttons of yoir device.
It looks like someone potentially did an MCU upgrade/flash. If there was no backup of the settings then you lost it all. Which also means you might have lost bluetooth connectivity as the bt module type on first page of factory setting might be wrong too. Also canbus and other things might be affected. I recpmmend to check out the discussion threads on MTCD devices here. Someone with the same unit might tell you the right settings.
Hint: If you have trouble tapping the icons with non-calibrated screen. Try connecting a standard USB mouse to any of the USB ports.
Hello has anyone experienced this?
Since last night (1/10/18) I have lost the ability to pull down the top menu using the screen.
I can still bring it up if I use the swiping function of the fingerprint reader though.
If i use the phone in landscape I am however able to pull down the top menu.
I tried rebooting several times, I also tried disabling/enabling the swipe gesture function, nothing helped so far.
Note: I do not use any launcher app.
Any idea as to what could cause that?
Just to update anyone stumbling on this post, the phone actually got worse...
The issue evolved into having the entire area of the touchscreen acting up.
Touch and swipes don't get recognized, and on the top of that the screen is tapping and swiping by itself.
Makes it really hard to use. I tried a factory reset but the issues remain.
The touchscreen digitizer probably failed...
Oh well I started an RMA with Google, should get a new phone with 5 days.
Cheers