Capacitive buttons lights different - HTC 10 Questions & Answers

Hello,
sorry for my bad english. I have a problem with my HTC 10. The Capacitive buttons lights different. The left button are brighter than the right button. Have any user this problem with this 10?

Mine is doing the same. All the store phones had the back key brighter. It seems it`s normal.

Kingbröt said:
Hello,
sorry for my bad english. I have a problem with my HTC 10. The Capacitive buttons lights different. The left button are brighter than the right button. Have any user this problem with this 10?
Click to expand...
Click to collapse
Agreed. Back button seems slightly brighter than the recent app button.

Thanks for the Answer.
I have a another problem with the Home Button. The left side is higher than the right side. is this normaly or not.

No normal, ofc...

ct85msi said:
Mine is doing the same. All the store phones had the back key brighter. It seems it`s normal.
Click to expand...
Click to collapse
Mine is also like this. So it's not defrctive?

Related

Capacitave buttons not very responsive..

Just been noticing that I usually have to press the capacitave buttons a few times to get it to recognize.... anyone else notice this. On my EVO if I press home or menu or back it recognized it right away, on the ET4G it seems to not recognize touch very well, but only on those soft buttons, everywhere else on the screen is great...
Mine work good, a hell of a lot better than my Epics. I'd say mine are a little less sensitive than the Evo 4G's and the Shift though.
luigic81 said:
Just been noticing that I usually have to press the capacitave buttons a few times to get it to recognize.... anyone else notice this. On my EVO if I press home or menu or back it recognized it right away, on the ET4G it seems to not recognize touch very well, but only on those soft buttons, everywhere else on the screen is great...
Click to expand...
Click to collapse
I think these have a smaller area for the button than the EVO did because I was experiencing the same thing but then noticed I wasn't pressing low enough. Now that I'm getting more used to the layout it seems like I'm getting a response from the buttons every time.
datajosh said:
I think these have a smaller area for the button than the EVO did because I was experiencing the same thing but then noticed I wasn't pressing low enough. Now that I'm getting more used to the layout it seems like I'm getting a response from the buttons every time.
Click to expand...
Click to collapse
thanks I will try this
datajosh said:
I think these have a smaller area for the button than the EVO did because I was experiencing the same thing but then noticed I wasn't pressing low enough. Now that I'm getting more used to the layout it seems like I'm getting a response from the buttons every time.
Click to expand...
Click to collapse
just tried this, works perfect, basically just press as low as possible and they are money
never would have thought of that, thanks !!!!
luigic81 said:
just tried this, works perfect, basically just press as low as possible and they are money
never would have thought of that, thanks !!!!
Click to expand...
Click to collapse
Makes you wonder... Were they designed that way, for some odd reason, or was the form off, and nobody bothered to QC the mass production version?

Touch Buttons

Is it just me or are the three bottom touch screen buttons finnicky not always responsive on the first click? Like when you're clicking it one of the touch buttons quickly, you have to wait a second then touch the button again for a response. Also your thumb has to be right on the button, can't touch corners etc.
Do you guys find you often have to repress one of the touch buttons on the bottom?
Nope. Maybe you're missing the button.
Sent from my Galaxy Nexus
BrandonPrice31 said:
Is it just me or are the three bottom touch screen buttons finnicky not always responsive on the first click? Like when you're clicking it one of the touch buttons quickly, you have to wait a second then touch the button again for a response. Also your thumb has to be right on the button, can't touch corners etc.
Do you guys find you often have to repress one of the touch buttons on the bottom?
Click to expand...
Click to collapse
Yes - especially when it is in my car dock.
My HTC Evo 4G has some kind of issue where the screen would not register touch if you laid it on a table or something but it worked fine if you held it in your hand. They were able to fix this with a software update (I have no idea how).
The Nexus feels like the same kind of issue - the soft buttons work ok if I'm holding it but on the table they don't seem to register a push well.
i noticed this too,
BUT, i also noticed that you have to pretty much touch the actual icon itself.
i tried tapping in-between the keys and noticed that it didn't do anything.
so no worries man, noting is wrong with your phone.
fwiw i have a wet screen protector on, so that might attribute to it.
predation said:
i noticed this too,
BUT, i also noticed that you have to pretty much touch the actual icon itself.
i tried tapping in-between the keys and noticed that it didn't do anything.
so no worries man, noting is wrong with your phone.
fwiw i have a wet screen protector on, so that might attribute to it.
Click to expand...
Click to collapse
As do I.
Anyone else noticing this 'issue'?
BrandonPrice31 said:
As do I.
Anyone else noticing this 'issue'?
Click to expand...
Click to collapse
Same issue here, I'm wondering if they dialed down sensitivity too much to avoid accidental presses while typing? I think it should only reduce sensitivity while the keyboard is up, not always.
Hope they increase the sensitivity a bit
i've seen stuff like this on other phones like my Samsung Wave S8500, some areas of the touchscreen don't respond properly unless part of you is touching the phone case, probably caused by the way capacitive touchscreens work?
ccjjr59 said:
Same issue here, I'm wondering if they dialed down sensitivity too much to avoid accidental presses while typing? I think it should only reduce sensitivity while the keyboard is up, not always.
Hope they increase the sensitivity a bit
Click to expand...
Click to collapse
agreed!
Sent from my Galaxy Nexus using Tapatalk
I just find the multi task button is a bit laggy, but this could be to do with redrawing the app images that's about it.
Sent from my Galaxy Nexus using XDA App

[Q] Black screen

My device has got black screen problem. When I press the power button I can't see anything. But there is a light on the three buttons. What can I do what is my problem? My screen hasn't got any problem...
tvfkozg said:
My device has got black screen problem. When I press the power button I can't see anything. But there is a light on the three buttons. What can I do what is my problem? My screen hasn't got any problem...
Click to expand...
Click to collapse
BSOD repleace the mainboard. Turn on to see the light on the tree buttons and do pressure between down right side on the main camera and display and report what happend.
tvfkozg said:
My device has got black screen problem. When I press the power button I can't see anything. But there is a light on the three buttons. What can I do what is my problem? My screen hasn't got any problem...
Click to expand...
Click to collapse
damage occurs on your hardware
Thant said:
BSOD repleace the mainboard. Turn on to see the light on the tree buttons and do pressure between down right side on the main camera and display and report what happend.
Click to expand...
Click to collapse
If I do that I can see the display but when I take my hand I can't use phone
tvfkozg said:
If I do that I can see the display but when I take my hand I can't use phone
Click to expand...
Click to collapse
Sorry if my method work you have Black screen of Dead (BSOD) only changing mainboard can help nothing else. Sorry
This is your problem

Problem with the Home Button

Hello,
i see some pictures who the Home Button left side higher than the right side. is this normaly or not. My Button have this problem.
Kingbröt said:
Hello,
i see some pictures who the Home Button left side higher than the right side. is this normaly or not. My Button have this problem.
Click to expand...
Click to collapse
Mine too. Manufacturing defect most probably. It's just cosmetic though. I've had mine since June and the fingerprint scanner still functions fine.

Different Region, Different Button Layout?

Just got a Korean version SM-F907N. Built quality is great, but I noticed that the Bixby button underneath fingerprint sensor doesn't work (solid, not pressable). After a little investigation it turns out that Korean version doesn't even have this button, instead they merged it with power button, or now called side key like the new iPhone.
It won't be an issue for me, but will it be a problem for any third-party ROMs?
Uometydev said:
Just got a Korean version SM-F907N. Built quality is great, but I noticed that the Bixby button underneath fingerprint sensor doesn't work (solid, not pressable). After a little investigation it turns out that Korean version doesn't even have this button, instead they merged it with power button, or now called side key like the new iPhone.
It won't be an issue for me, but will it be a problem for any third-party ROMs?
Click to expand...
Click to collapse
SM-F900U in the US, the fingerprint sensor is not a button either.
Uometydev said:
But I noticed that the Bixby button underneath fingerprint sensor doesn't work (solid, not pressable).
Click to expand...
Click to collapse
There isn't a dedicated Bixby button on any Fold. There isn't one on the Note 10 either for that matter. Newer phones moved to mapping the power button to do different things based on a single press or double press.
Uometydev said:
Just got a Korean version SM-F907N. Built quality is great, but I noticed that the Bixby button underneath fingerprint sensor doesn't work (solid, not pressable). After a little investigation it turns out that Korean version doesn't even have this button, instead they merged it with power button, or now called side key like the new iPhone.
It won't be an issue for me, but will it be a problem for any third-party ROMs?
Click to expand...
Click to collapse
Hahaha. You made my day. Fingerprint is not a button at all. Note 10 and Galaxy fold got it merged with power button.
bogdi1988 said:
SM-F900U in the US, the fingerprint sensor is not a button either.
Click to expand...
Click to collapse
robdevil said:
Hahaha. You made my day. Fingerprint is not a button at all. Note 10 and Galaxy fold got it merged with power button.
Click to expand...
Click to collapse
Yeah now I know, but The Verge’s video actually mentioned this earlier said this layout is pretty annoying, so maybe during the reinforcement they changed their mind

Categories

Resources