Is there any working twrp with OOS 4.0.2....I am using stock nougat...I tried to flash twrp it says successful in cmd but it boots to stock recovery every time. Also is there any ROM which gives me VoLTE.? I have A3000 and VoLTE doesn't work in India.
Make sure you've unlocked your bootloader.
Official v3.0.3-0 and blu_spark v14 TWRP work with OOS v4.0.2
dbabaev21 said:
Make sure you've unlocked your bootloader.
Official v3.0.3-0 and blu_spark v14 TWRP work with OOS v4.0.2
Click to expand...
Click to collapse
Latest is v15 i think
Nobody07 said:
Latest is v15 i think
Click to expand...
Click to collapse
yes. https://forum.xda-developers.com/oneplus-3/development/kernel-t3404970/post70687988#post70687988
nadzzsam said:
Is there any working twrp with OOS 4.0.2....I am using stock nougat...I tried to flash twrp it says successful in cmd but it boots to stock recovery every time. Also is there any ROM which gives me VoLTE.? I have A3000 and VoLTE doesn't work in India.
Click to expand...
Click to collapse
For TWRP, the answer is as above.
As regards VoLTE, it works in India if you have the A3003 model at least in stock OOS ROM (3.2.6, 3.2.8, 4.01 and 4.0.2 all of which I can personally vouch for). Your issue might be that the A3000 may be missing the bands required for VoLTE in India.
Official TWRP 3.0.4.0 apparently contains a few bug fixes that is present in 3.0.3-0 and they advice you to use 3.0.4-0 in the official thread (https://forum.xda-developers.com/oneplus-3/development/recovery-official-twrp-oneplus-3-3t-t3543391)
tnsmani said:
For TWRP, the answer is as above.
As regards VoLTE, it works in India if you have the A3003 model at least in stock OOS ROM (3.2.6, 3.2.8, 4.01 and 4.0.2 all of which I can personally vouch for). Your issue might be that the A3000 may be missing the bands required for VoLTE in India.
Click to expand...
Click to collapse
But internet works just fine.... can I use a ROM for it though?
nadzzsam said:
But internet works just fine.... can I use a ROM for it though?
Click to expand...
Click to collapse
Internet will work but may not at 4G speeds. If you don't have the band for VoLTE, you can not do anything about it. Some research is going on here:
https://forum.xda-developers.com/oneplus-3/help/unlocking-lte-bands-t3425871
See how difficult it is.
The one on the blu_spark kernel page is faster than offical latest twrp ?
SpartaKurd said:
The one on the blu_spark kernel page is faster than offical latest twrp ?
Click to expand...
Click to collapse
What do you mean by 'faster'? The loading time?
If your data partition is on f2fs, then both versions take their own time.
tnsmani said:
What do you mean by 'faster'? The loading time?
If your data partition is on f2fs, then both versions take their own time.
Click to expand...
Click to collapse
yeah, loading/waiting time...
Related
Here are stock rooted ROM's with a decrypted & insecure boot.img for those of you who like to stay close to stock. They are based off of the latest firmware. There are only a few mods and addons.
Features:
-Decrypted & Insecure boot.img
-Adb fixed and working
-Pre-rooted with SuperSU
-Busybox installed
-Google Play Store
-Google Contacts Sync
-Google Calendar Sync
-------CURRENT VERSION B323--------
NXT-AL10 B323 ROOTED DEBLOATED GAPPS
https://drive.google.com/file/d/0B5I_q70mNuR4a3FMV1RvYmlQNm8/view?usp=sharing
nice, good job does it contain google apps and services? asking since its based off the AL10 firmware.
Sent from my Huawei Mate 8 NXT-AL10 using Tapatalk
jbmc83 said:
nice, good job does it contain google apps and services? asking since its based off the AL10 firmware.
Sent from my Huawei Mate 8 NXT-AL10 using Tapatalk
Click to expand...
Click to collapse
No, it's basically stock.
ajsmsg78 said:
No, it's basically stock.
Click to expand...
Click to collapse
So can I install it in L29?
i dont see why not. just beware that ull have to manually install google apps and services, since this is based off an AL10 rom.
rowihel2012 said:
So can I install it in L29?
Click to expand...
Click to collapse
You should be able to flash it over L29 in TWRP and it should work.
ajsmsg78 said:
You should be able to flash it over L29 in TWRP and it should work.
Click to expand...
Click to collapse
Thank you bro
So the Chinese stock recovery works with L29 ?
rowihel2012 said:
Thank you bro
So the Chinese stock recovery works with L29 ?
Click to expand...
Click to collapse
You really won't need the stock recovery once you flash twrp unless you want to go back to stock.
Could you explain Encrypted Boot/Decrypted boot ? I'm a new user from huawei.
This is awesome. Can one be made for the international ROM?
adriangb said:
This is awesome. Can one be made for the international ROM?
Click to expand...
Click to collapse
I make a Rom this weekend
adriangb said:
This is awesome. Can one be made for the international ROM?
Click to expand...
Click to collapse
If I could extract the system.img properly (I always get some kind of error on Windows or Linux using about 4 different tools) I would be able to modify it and make one.
ajsmsg78 said:
You really won't need the stock recovery once you flash twrp unless you want to go back to stock.
Click to expand...
Click to collapse
so the new twrp can flash img files like using fastboot?
and why twrp not reading the internal storage?
rowihel2012 said:
so the new twrp can flash img files like using fastboot?
and why twrp not reading the internal storage?
Click to expand...
Click to collapse
You need to flash the decrypted boot.img or the stock rooted decrypted rom I posted, then go into TWRP and wipe then format data. Then your internal storage will be recognized.
ajsmsg78 said:
You need to flash the decrypted boot.img or the stock rooted decrypted rom I posted, then go into TWRP and wipe then format data. Then your internal storage will be recognized.
Click to expand...
Click to collapse
good
if i wanna go back to the stock l29 rom after flashing the dectypted chines rom what should i do?i cant find any l29 stock rom to download
rowihel2012 said:
good
if i wanna go back to the stock l29 rom after flashing the dectypted chines rom what should i do?i cant find any l29 stock rom to download
Click to expand...
Click to collapse
It's posted here somewhere just search for it.
somboons said:
Could you explain Encrypted Boot/Decrypted boot ? I'm a new user from huawei.
Click to expand...
Click to collapse
is thai version does came with Gapps
i see review international china version its didnt came with Gapps
m3dd0g said:
I make a Rom this weekend
Click to expand...
Click to collapse
Tell me if you need help. I make my rom but for now my goal is to make a perfect TWRP. I'll publish this afternoon TWRP.
For my rom I've tuned a lot audio part and work with google stuff but I haven't a lot of time to follow rom
acer73 said:
Tell me if you need help. I make my rom but for now my goal is to make a perfect TWRP. I'll publish this afternoon TWRP.
For my rom I've tuned a lot audio part and work with google stuff but I haven't a lot of time to follow rom
Click to expand...
Click to collapse
I hope also i have time that weekend. You have used twrp source which i posted to build twrp?
Duckscreen said:
is thai version does came with Gapps
i see review international china version its didnt came with Gapps
Click to expand...
Click to collapse
It has Gapps.
Sent from my LG-D802 using Tapatalk
give some suggestions on this problem plz.....
Installation Files
1.) Required twrp
**2) Required Firmware 3.2.6 one time installation** this is what you are missing
3.) Rom
4.) Open Gapps
Read the op it gives you all the info m8
Dee6600 said:
give some suggestions on this problem plz.....
Click to expand...
Click to collapse
If you try and read the first post ...you will get it very clear..why your finger sensors not working and which firmware you need to flash...
http://forum.xda-developers.com/showthread.php?t=3403365
Sent from my ONEPLUS A3003 using Tapatalk
Dee6600 said:
give some suggestions on this problem plz.....
Click to expand...
Click to collapse
"Make sure that OxygenOS firmware+modem CE 3.5.5 is installed on your device. Modified TWRP 3.0.2-22 is needed as well for further updates."
I found post on xda with same problem... You need to downgrade your radio(or something) on xda you can find flashable zip with it
On the latest official rr build, you need to be on 3.5.5 CB firmware for fingerprint scanner to work properly.
aadityarulez said:
On the latest official rr build, you need to be on 3.5.5 CB firmware for fingerprint scanner to work properly.
Click to expand...
Click to collapse
+1 using RR latest as secondary ROM whereas CB 3.5.5 as primary and everything running perfectly
Sent from my ONEPLUS A3003 using Tapatalk
I confirm here 3.5.5-CB + BJRR 13.11.2016 working
GizROM 3.0 for ZUK Z2 based on ZUI 3.1.117 !
Changelog 3.0
* Based on ZUI 3.1.117 Chinese Nougat;
* improved translations;
* bug fixes and optimizations.
First installation
1 Copy the GizROM package to your phone;
2 enter recovery (choose power-on entry with the volume keys and select it with power);
3 clean the Data, Cache and Dalvik Cache partitions;
4. install ROM from TWRP;
5. restart the device.
Download - https://goo.gl/vt73Kw
Source
https://forum.gizchina.it/index.php?/topic/1291-gizrom-30-per-zuk-z2-zui-31117/
I'm not tested this.
Hdr+?
Stock rom have hdr+ so yes.
Don't need to wipe system? What if coming from different rom?
Clean all. What's different? This is custom stock rom bro. [emoji849]
I flashed solely for the baseband. Attaching screenshot if anybody is interested.
Airtioteclint said:
I flashed solely for the baseband. Attaching screenshot if anybody is interested.
Click to expand...
Click to collapse
AEX5 How power consumption？
Airtioteclint said:
I flashed solely for the baseband. Attaching screenshot if anybody is interested.
Click to expand...
Click to collapse
gizrom 3.0 flashed. bootloader locked?
ERHAN53 said:
gizrom 3.0 flashed. bootloader locked?
Click to expand...
Click to collapse
No. I don't think it makes a difference but I didn't boot into the rom. Like I said, i was only interested in the baseband and restored aex immediately after flash.
It did not lock my bootloader.
Araa01 said:
Stock rom have hdr+ so yes.
Click to expand...
Click to collapse
Without api2 how hdr+ will work on stock???
This is not Oreo?
Airtioteclint said:
I flashed solely for the baseband. Attaching screenshot if anybody is interested.
Click to expand...
Click to collapse
Just confirming that it is twrp flashable, ryt?
Will it work on indian z2 plus?
Does it have Vietnamese?
Airtioteclint said:
I flashed solely for the baseband. Attaching screenshot if anybody is interested.
Click to expand...
Click to collapse
Can you tell me the procedure you did to update your baseband. ? Just flashing this and booting the device will update the baseband? After booting up I can again reboot to recovery and flash valdis or screwd ROM which need updated baseband for installing the ROM.. please help?
abhay009 said:
This is not Oreo?
Click to expand...
Click to collapse
nope
Flashing this ROM lock your bootloader.
selvarajrajkanna said:
Flashing this ROM lock your bootloader.
Click to expand...
Click to collapse
One page back it (someone) says it does not.
fallen.kn said:
One Page back it says it does not.
Click to expand...
Click to collapse
Yep, it does. I tried it myself.
selvarajrajkanna said:
Flashing this ROM lock your bootloader.
Click to expand...
Click to collapse
I can confirm if you boot into the rom, it will lock your bootloader. As long as you stay in twrp after flashing then you should have no problems.
I want to know if bootloader of z2 force us cellular could be unlocked ?/Or
Can it be rooted ?
Is there any custom rom available to install on this carrier ?
I want to know before I buy this model...
1. Yes.
2. Yes.
3. Unfortunately, Z2F have absolutely none custom roms like RR, LOS or AOSP. Stock firmware is the only option available since 2017 and that's not going to be changed ever.
Osmatic said:
1. Yes.
2. Yes.
3. Unfortunately, Z2F have absolutely none custom roms like RR, LOS or AOSP. Stock firmware is the only option available since 2017 and that's not going to be changed ever.
Click to expand...
Click to collapse
ERM.... I'm running Dirty Unicorns....
Osmatic said:
1. Yes.
2. Yes.
3. Unfortunately, Z2F have absolutely none custom roms like RR, LOS or AOSP. Stock firmware is the only option available since 2017 and that's not going to be changed ever.
Click to expand...
Click to collapse
AOSiP
Thanks guys.
I am going to buy z2 force..
Uzephi said:
ERM.... I'm running Dirty Unicorns....
Click to expand...
Click to collapse
can you tell me the process? I've done the standard process but I keep getting "error applying update: 18"
nguyenpowell said:
can you tell me the process? I've done the standard process but I keep getting "error applying update: 18"
Click to expand...
Click to collapse
Are you referring to the process to go from a stock ROM to an AOSP based ROM?
For the error you are receiving, is that error occuring in TWRP or in fastboot?
Sent from my Moto Z2 Force using XDA Labs
fast69mopar said:
Are you referring to the process to go from a stock ROM to an AOSP based ROM?
For the error you are receiving, is that error occuring in TWRP or in fastboot?
Sent from my Moto Z2 Force using XDA Labs
Click to expand...
Click to collapse
Yes, from Stock->Custom ROM.
And it's taking place in TWRP. On my unlocked Moto Z2 Force XT1789-02 (US Cellular Model)
nguyenpowell said:
Yes, from Stock->Custom ROM.
And it's taking place in TWRP. On my unlocked Moto Z2 Force XT1789-02 (US Cellular Model)
Click to expand...
Click to collapse
Did you flash twrp to your phone or only boot it?
Uzephi said:
Did you flash twrp to your phone or only boot it?
Click to expand...
Click to collapse
I have twrp flashed on my phone!
nguyenpowell said:
I have twrp flashed on my phone!
Click to expand...
Click to collapse
Did you succeed flashing custom rom? Could you use your us cellular phone with another carrier?
hey guys! I just Uploaded this stock rom.
I already edited this one, so the others that unable to edit the firmware package from asus can simply download this and flash via recovery (e.g TWRP)
hope it helps!
Build .094
LINK: https://www.mediafire.com/file/eorjham5jj4wns5/stock_094.zip/file
Build .097
LINK: https://www.mediafire.com/file/hbaps1nm8hfwn5e/stock_097.zip/file
kayamokid said:
hey guys! I just Uploaded this stock rom.
I already edited this one, so the others that unable to edit the firmware package from asus can simply download this and flash via recovery (e.g TWRP)
hope it helps!
LINK: https://drive.google.com/open?id=19Y3Sk5wGs4EsMpQCWrULawo8OJvqiDKY
Click to expand...
Click to collapse
What SKU version is this?
Has anyone tried this. Please review and post here. I m on latest havoc OS, can I install it ? Last time I tried official pie,it messed a lot of things. Also please tell what sort of bugs were resolved after the latest 064 update.?
X10MINISTER said:
What SKU version is this?
Click to expand...
Click to collapse
its IN /RU. I'm from philippines and thats whats I get from asus PH.
anilyarki said:
Has anyone tried this. Please review and post here. I m on latest havoc OS, can I install it ? Last time I tried official pie,it messed a lot of things. Also please tell what sort of bugs were resolved after the latest 064 update.?
Click to expand...
Click to collapse
I tried this. I just use twrp and:
- wipe system data cache internal (for clean internal storage )
- flash this firmware. (just like typhical custom roms)
- reboot to recovery ( to check if its reverted to stock recovery)
- reboot.
Will it lock the bootloader and unroot the phone??
Will the official ota work??
koppisetty shravan said:
Will it lock the bootloader and unroot the phone??
Will the official ota work??
Click to expand...
Click to collapse
no, you must relock it.
kayamokid said:
its IN /RU. I'm from philippines and thats whats I get from asus PH.
Click to expand...
Click to collapse
How abt the VoLTE function? Is it enabled by default?
is this debloated rom or you just removed the assert line??
Zach Seretika said:
How abt the VoLTE function? Is it enabled by default?
Click to expand...
Click to collapse
I dunno sir. this is just a typhical firmware from asus. I just edited the updater to be able to flash this via TWRP.
Karvrock said:
is this debloated rom or you just removed the assert line??
Click to expand...
Click to collapse
I just removed the assert line sir.
Glad that I flashed this one . Here is a quick review for all those who have questions about this.
1. Stable rom. Can easily be used as a daily driver.
2. Gcam 6.024 fully supported. Even the front cam works. Night mode works l, no lags what so ever.
3. Volte function is supported . Dual volte supported.
4. Flashing this rom will not lock your bootloader or remove custom recovery. So have fun.
5. Battery back up is amazing. Can last up to 6hrs of pubg play with frame rates set to high.
6. All banking apps working for me.
7. Rooted with latest magisk 19.1
8. Audio output is decent.
Things that didn't work
1. WhatsApp video calling lag. This stupid bug has made its way in official firmware as well. Not sure how to resolve it. Rest all gr8
Will you provide support for all the ota and make it twrp flashable ???
Sent from my OnePlus5T using XDA Labs
Amanpreetsingh said:
Will you provide support for all the ota and make it twrp flashable ???
Sent from my OnePlus5T using XDA Labs
Click to expand...
Click to collapse
i'll try my very best in the future.
thank you! I really wanted to use the stable pie but before I always failed flashing through TWRP even though I edited the script.
if it doesn't support OTA and the latest version has been updated, are you going to make this flashable script again?
Deadley said:
thank you! I really wanted to use the stable pie but before I always failed flashing through TWRP even though I edited the script.
if it doesn't support OTA and the latest version has been updated, are you going to make this flashable script again?
Click to expand...
Click to collapse
Yes.
Quick question, do you have to flash decrypt zip again before/after flashing stock? I already did use decrypt once before. Now I'm currently on Havoc. Thanks!
bratboo said:
Quick question, do you have to flash decrypt zip again before/after flashing stock? I already did use decrypt once before. Now I'm currently on Havoc. Thanks!
Click to expand...
Click to collapse
NOT required if you are using pbrp. Flash it if using twrp.
anilyarki said:
NOT required if you are using pbrp. Flash it if using twrp.
Click to expand...
Click to collapse
How about whatsapp video call issue
---------- Post added at 11:07 AM ---------- Previous post was at 11:01 AM ----------
kayamokid said:
Yes.
Click to expand...
Click to collapse
Whatsapp videocall still lag?
WhatsApp video call lag is there. I have found a solution now but I have already changed to arrow OS. Can you try this a let us know if it works.
Edit build.prop inside vendor folder
Than add com.whatsapp or package name of any whatsapp mod to line camera.hal1.packagelist
Reboot, if still lagging, edit the name of camera.hal1.packagelist to vendor.camera.hal1.packagelist
It will help others of someone could try this.