Hi everyone,
Anyone here tried the QC 3.0 charger with Nubia Z11?
How fast does it charge?
I have the stock charger which is 5V 2A only. So i guess QC 3.0 charger should charge faster as Z11 supports QC 3.0 fast charging.
Looking forward to know your experiences with the QC 3.0 charger.
Thanks in advance.
Related
I recently bought tronsmart type c quick charge 3.0 wall charger for my htc 10. But its not quick charging my htc 10. When i connect same charger with lg g5, it shows fast charging.
Help me solve this problem. Why htc is not quick charging although tronsmart charger supports QC 3.0
Do you use the included cable from htc? Or are you using a type c to type c cable? Qc 3.0 only seems enabled on the type a connector. I think this is for all Qc enable equipment.
I am using type c to type c cable
But lg g5 shows quick charge on same cable whereas htc 10 just shows only charging
Yes, it does show quick charge with original htc charger.
Wakaas.Dr said:
I recently bought tronsmart type c quick charge 3.0 wall charger for my htc 10. But its not quick charging my htc 10. When i connect same charger with lg g5, it shows fast charging.
Help me solve this problem. Why htc is not quick charging although tronsmart charger supports QC 3.0
Click to expand...
Click to collapse
Read the review of this charger by Benson: https://www.amazon.com/Charger-Tronsmart-Charge-Technology-Attached-Approved/dp/B0146FK3G0
One port is QC3.0 and the usb type co i 5V/3A max. Previous versions of this charged was very dangerous, people posted reviews of their burned cables and devices.
Hi guys,
Just a simple question... Is Qualcomm Quick Charge 2.0 supported on the OnePlus 3?
I know there is Dash Charge (which is great), but I have a powerbank which supports Quick Charge 2.0...
I want to know if it wil charge faster than a regular 5V/1A USB port.
Thx!
Same problem here, would like to know this too. Can anyone with a OP3 try and let us know the different charging times with a normal charger, QC QC2.0 and Dash charger?
Sent from my LG-H955 using XDA-Developers mobile app
I don't have a Quick Charge charger, but with another charger the OP3 pulls around 1.5 A @ 5V = 7.5 W from it. This is the USB compliant amount i think.
I don't think that the OP3 supports any version of Quick Charge... But with a capable charger (non-Dash) it's pretty quick, too! In my car it gains fairly quickly, even though i'm navigation with google maps and i don't have a Dash-Charge car charger! With previous phones (LG G3 for example) the phone even LOST battery capacity while being plugged in!
Normal 5V 2.4A Charger: 1.5A @ 5V
5V 3A Quick Car Charger (for Nexus 5X/6p): 1.5A @ 5V
Quick Charge 2.0 Wall Charger: 1.5A @ 5V... you're beginning to get the idea...
Dash Charge Wall Charger: 3.5A @ 5V
And I tried a genuine 5V 1A iphone charger, 0.5A @ 5V
GeneralDisaray2 said:
Normal 5V 2.4A Charger: 1.5A @ 5V
5V 3A Quick Car Charger (for Nexus 5X/6p): 1.5A @ 5V
Quick Charge 2.0 Wall Charger: 1.5A @ 5V... you're beginning to get the idea...
Dash Charge Wall Charger: 3.5A @ 5V
Click to expand...
Click to collapse
This.
Just did the test by myself with the 'Ampere' app.
Battery was at 55%.
Dash Charge: 3330 mA
Qualcomm Quick Charge 2.0 Charger: 1420 mA
PC USB Port: 380 mA
My Nexus 6 charges at 2050 mA when connected to the Qualcomm Quick Charge 2.0 Charger.
Is it in some way possible to 'tweak' the OP3 so it can take 2000 mA when connected to a QC 2.0 charger?
I'm using ElementalX kernel btw.
OP3 is not quickcharge compatible so when connected to a quickcharge charger, the charger is in normal mode at 5V with a maximum of intensity that depend on the charger.
BUT the OP3 have only 3 charging step, one at 5V 0.5A, one at 5V 1.5A and then 5V 3.5A only if it's connected to a dash charger with a dash cable (or a oppo vooc with an adapter).
So for example, you connect to a 5V 1A charger, it will charge at 0.5V, like on a computer. But if it can draw 1.5A, it will do it but not above that unless a dash charger.
I tried many charger and it will not charge at another intensity.
I use a 'Dell AC Battery Charger Adapter USB-C470-ABSF Dell 45W 20V 2.25A' for charging my laptop. Can i also use this charger for the LG V20?
I'm using the one from my Asus Chromebook.
Somebody knows which QC 3.0 charger is compatible with the LG V20?
JuiceBitz in the UK...
Their v3.0 23W charging brick, along with their USB A-C cables work fine with my newly aquired V20.
My V20 charging doesn't slow down if I have a 'normal' USB 2 lead charging another device in the other slot either...
Sony UCH12W will work. I also use Ugreen Quick Charge 3.0 charger. It works fine
I have one Quick Charge 3.0 charger (poweradd) and one USB PD (iclever), and (according to systempanel2) they all charge at about the same rate. Max ~1 A while the screen in on (usually throttled at ~500 mA, I'm using a modified thermal config file), and ~3 A while the screen is off. So your 2.25 A charger should work fine, just won't be quite as fast as a QC 3.0 or PD charger.
Currently looking for a car charger. Is it fine to stick with my current 5v 2.1 amp charger or buy QC 3.0 charger?
https://motorola-mobility-en-in.cus...rod_answer_detail/a_id/116966/p/30,6720,10165
It shouldn't make a difference. A weaker charger takes longer, but I've had good luck with "non-turbo" chargers. I'm running the same charging setup for the G5+ as I had with my Nexus 5, both in my home and my vehicle.
fcukcompany said:
Currently looking for a car charger. Is it fine to stick with my current 5v 2.1 amp charger or buy QC 3.0 charger?
Click to expand...
Click to collapse
Quick Charge certified is a must have!
I have the previous version of this one (QC 2.0 version, not QC 3.0) and I love it.
They have options with more ports, but I need a low profile charger since the power jack is in a very awkward spot.
I know that there is a teardown showing a QC 3.0 charge controller in the phone, but has anyone actually tried charging it with a QC 3.0 (and maybe 2.0) charger? Can you confirm that it does still charge fairly quickly? Don't really want to change all my QC chargers and powerbank. It will be a bonus if someone can test it with a Huawei FCP charger too as that charge my Mi8 Lite (QC 3.0) fast too.
Thanks.
alvinlwh said:
I know that there is a teardown showing a QC 3.0 charge controller in the phone, but has anyone actually tried charging it with a QC 3.0 (and maybe 2.0) charger? Can you confirm that it does still charge fairly quickly? Don't really want to change all my QC chargers and powerbank. It will be a bonus if someone can test it with a Huawei FCP charger too as that charge my Mi8 Lite (QC 3.0) fast too.
Thanks.
Click to expand...
Click to collapse
QC 3.0 is confirmed and working.
@SidDev said:
QC 3.0 is confirmed and working.
Click to expand...
Click to collapse
Thanks.
alvinlwh said:
Thanks.
Click to expand...
Click to collapse
Welcome and press the thanks button if helpful.