Hi all, I have a sprint M9, Bootloader unlocked and S-off. My phone is currently running ICE ROM 5.1.0. I chose the international version and its working perfectly fine. I want to add some LTE networks that my carrier suports here in India but I'm unable to enable USB diagnostic mode on my phone using the code ##3424# or through adb. Htc USB diag port doesn't even show up in my computer. I tried the methods available in the thread that describes how to add/edit networks on htc m9 but wasn't able to do it. I need some help here.
Related
I managed to get a hold on an HTC Zara for Virgin Mobile (Model HTC 0P4E1), if anyone has access to these devices or knows how to generate a service code to unlock from VIrgin Mobile, a code to get get into diagnostic mode for CDMA workshop, or provide a compatible firmware image I would appreciate it much. I am pretty technical and can test out a lot of different procedures and report back here if people have suggestions.
Mods: Since the device is so new there is not a board for it yet, so I put this here in general unlocking and modifying.
EDIT: forgot to add, the device also needs DIAG drivers if anyone knows how to get them or a way to make the DIAG drivers for another HTC variant work
-nutter
As the N910P bootloader is not locked, is it possible to flash international LTE Qualcomm stock firmware, i.e. N910F, successfully?
Has anyone tried?
EDIT
Well I tried.
Stock N910F ...BOB4 did not flash via odin.
Echoerom 5.0.X flashed successfully. Flashing Modem + Bootloader of ...BOB4 via Odin after ROM fails.
Modem is the culprit to my pain. Is there anyway to trick the phone into thinking a different MODEM+BL is of Sprint origin?
REASON: I am wanting to use N910P internationally. It does not work as originally hoped via sim-unlock.
Unlocked International N910P
Great News for N910P owners. Unlocked bootloader = custom kernel = profit
Different band frequencies can be used internationally following the instructions in the OPs by .fffft[/MENTION] Mucho thanks to him.
http://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059
FYI Steps:
1. Carrier Sim Unock / SSU apk
2. Select GSM/UMTS & go into service mode via ##0011# . Wait for GSM service. Menu Back Key. Menu Input "Q". Menu input "0000". Wait 5 seconds.. Find Menu item to change Network Preference to "Global". Leave it on this, do not change back to LTE or CDMA.
3. Input your APNs.
4. Root.
5. Appstore for SPCUtility or MSLReader. or ask Sprint for it if you are in good standing, tell you are going abroad.
6. Diag mode via ##DIAG#. Input MSL. Select CDMA Modem then Qualcomm. Select last option. CP + DM + Modem
7. Edit the NV items following the instructions of the above thread. Read, edit, write. I used QXDM program on Windows. If you are editing via CDMA Workshop or Tool I think you will need to select PDA in ##DIAG# also you will need both your MSL and 16 digit PW– 2012112120131219.
8. New Band Frequencies will only work on Custom KERNEL & ROM. DL and Flash for trltespr . Profit .
Flashed CM12 nightly w GAPPS
Praise the lord LTE bands work here in Canada.
They may work domestic if they are different frequencies/bands than CDMA networks. worth trying, but Im not in the US for awhile.
Cant wait for custom TW 5.0 ROMS to roll out with the hard work of the awesome developers here who keep me buying android!
Notes:
I don't have access to Service Mode anymore via dialer so I don't know how to go back to choosing preferred networks, i.e. Global, in CM. It reads "Global" on Settings>Mobile Networks . I fear switching to "LTE only"for having to do the whole process again via flash stock to access all the required menu again.
Edit : Lost LTE , only HSPA+ available
Hi, I had a M8 before and used diagnostic mode which was ##3424# before to unlocked some LTE bands. this time i am trying the same stuff in my new 10 but it never works. any idea on how to do this?
All the firmware rom's come with CDMA mode activated and once flashed it's impossible to switch to GSM mode, only if you are under the Verizon coverage with a verizon sim card. The apk patch that reveal secret menu founded on other pages don't work a app crash appear.
Im wonder if exista a firmware that came with GSM mode as primary network mode. Second in Lg Flash Tool i dont see GSM in "Select Type" only CDMA and CDMA Smarthpone(WM).
Wwhat is the best way to get the GSM mode for LG VS880 rooted without using apk.?
biobio22 said:
All the firmware rom's come with CDMA mode activated and once flashed it's impossible to switch to GSM mode, only if you are under the Verizon coverage with a verizon sim card. The apk patch that reveal secret menu founded on other pages don't work a app crash appear.
Im wonder if exista a firmware that came with GSM mode as primary network mode. Second in Lg Flash Tool i dont see GSM in "Select Type" only CDMA and CDMA Smarthpone(WM). Wwhat is the best way to get the GSM mode for LG VS880 rooted without using apk.?
Click to expand...
Click to collapse
I don't have this device but, with a limited amount of threads for the LG G Vista, your best bet is to post this question within the following one that seems to be the closest one for some member guidance.
https://forum.xda-developers.com/showthread.php?t=3132905
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Hi, so my service provider has enable Volte but it's not working on my Htc 10 because it's locked and Htc 10 is old and probably won't give update to enable also by enabling magisk root won't work . There is method for op6T and it finally enabled these services for my phone even though service provider didn't enable for my device some people tired on their different devices other than op and it works for them so i also want to try and enable for my Htc 10 but I really don't know codes for Htc 10 because we need to enable full switch port mode and idk for Htc 10 if you know do let me know also if you guys have method for Htc 10 let me know as well.
This is method I tired on Op6T and working fine for me .
I'm attaching screenshot of full switch port mode in case if you guys didn't get what I meant
farhan20 said:
Hi, so my service provider has enable Volte but it's not working on my Htc 10 because it's locked and Htc 10 is old and probably won't give update to enable also by enabling magisk root won't work . There is method for op6T and it finally enabled these services for my phone even though service provider didn't enable for my device some people tired on their different devices other than op and it works for them so i also want to try and enable for my Htc 10 but I really don't know codes for Htc 10 because we need to enable full switch port mode and idk for Htc 10 if you know do let me know also if you guys have method for Htc 10 let me know as well.
This is method I tired on Op6T and working fine for me .
I'm attaching screenshot of full switch port mode in case if you guys didn't get what I meant
Click to expand...
Click to collapse
There was an update on the Indian model that gave the option to enable it. If you have a device from another region, getting S-OFF and flashing the Indian Build is the only way to get said update.
csoulr666 said:
There was an update on the Indian model that gave the option to enable it. If you have a device from another region, getting S-OFF and flashing the Indian Build is the only way to get said update.
Click to expand...
Click to collapse
Thanks for response!
Actually there is method for op6t to enable volte forcefully
https://forum.xda-developers.com/oneplus-5t/how-to/guide-volte-vowifi-german-carriers-t3817542
That's the link and some people have tired on their different phones and it actually works so I was wondering any method available for htc 10 or if I can know how can I enable volte Forcefully because there are pretty much codes for other devices but I couldn't find much about htc .. let me know if you know how can I enable full-Port switch on htc phone so I can try this method on my htc 10! Thanks