I just managed to get out of RELINK Qualcomm HS-USB QDLoader 9008 and with debrick.img on extsdcard. Then i got into BOOT RECOVERY MODE (detectable in odin)
BUT right now i can't flash anything not even PIT
Can't boot into android
Halp
Heumi said:
I just managed to get out of RELINK Qualcomm HS-USB QDLoader 9008 and with debrick.img on extsdcard. Then i got into BOOT RECOVERY MODE (detectable in odin)
BUT right now i can't flash anything not even PIT
Can't boot into android
Halp
Click to expand...
Click to collapse
how to enter recovery? can you give me tutorial and debrick.img
i was trying lot of them but not work
Related
I followed this guide http://forum.xda-developers.com/lg-...-root-bumpd-twrp-t3048845/page20#post59473703
excuse my English, then the procedure I did was download the KDZ for my terminal and I extracted as trained all the files in order to create the .img I took the super and I turned on the extension .zip .img I installed busybox and I launched the terminal, I gave the commands I came out recovery aborted and ended the procedure ... I wrote in the terminal and restart from there my terminal is not lit anymore. it does not go into download mode in recovery and it is not recognized by pc me qualcomm hs-usb qdloader 9008 ...
I have a question about this: I currently have the stock 20H firmware(rooted). If I install this with the LG Tool, will I lose TWRP and root?
Later edit: Sorry, I misclicked and posted in the wrong thread. I hope a mod will notice and delete this post.
aitanoddl said:
I followed this guide http://forum.xda-developers.com/lg-...-root-bumpd-twrp-t3048845/page20#post59473703
excuse my English, then the procedure I did was download the KDZ for my terminal and I extracted as trained all the files in order to create the .img I took the super and I turned on the extension .zip .img I installed busybox and I launched the terminal, I gave the commands I came out recovery aborted and ended the procedure ... I wrote in the terminal and restart from there my terminal is not lit anymore. it does not go into download mode in recovery and it is not recognized by pc me qualcomm hs-usb qdloader 9008 ...
Click to expand...
Click to collapse
What happens if you do a restore with LG PC Suite?
Razertje said:
What happens if you do a restore with LG PC Suite?
Click to expand...
Click to collapse
no is not recognized in any way .... guys I have the phone locked in it does it in revovery downloadmode You come revive Solutions
Ive wanted to install MM but i accedently deleted my laf partition so i only have fastboot but now i triggered that secure boot thing and my phone isnt willing to flash a recovery or boot one from fastboot what could i do ?
im just downloading medusa jtag software kit maybe i will be successfull i brought my phone to qualcomm 8009 mode by hardwire 2 connectins
Whats detected on ure pc in device man
fastboot mode is detected if i hold + and plug in usb but if i type fastboot boot twrp-2,7-d885.img it just hang at boot and download mode is destroyed no backup of laf partition here im just downloading 10e EUR tot and then bring g3 to qualcom 9008 mode and use boardDiag
J0SH1X said:
fastboot mode is detected if i hold + and plug in usb but if i type fastboot boot twrp-2,7-d885.img it just hang at boot and download mode is destroyed no backup of laf partition here im just downloading 10e EUR tot and then bring g3 to qualcom 9008 mode and use boardDiag
Click to expand...
Click to collapse
Why don´t you: fastboot flash laf laf.img ?
i cant do fastboot flash then it stuck at writing laf and then fastboot abort the flash and even if im able to flash laf i get secure boot error
Thats the command http://imgur.com/j7dfAiu
thats the phone http://imgur.com/ryB9p8r
Progressing fastboot http://imgur.com/Pa0kwfT stuck there
phone output http://imgur.com/tJ0Uj22
------------------------------
boot verfication fail
cause :mismatch_sig_len
-------------------------------
is the error if i try to boot the phone
Hello,
has anyone found a solution how to debrick the hard bricked FirePhone (64 GB)?
Currently the phone is recognized as QHSUSB_BULK -> Qualcomm HS-USB QDLoader 9008.
I tried the following tools for recovery:
ADB and FastBoot
- Cannot found device.
QFIL
QPST
- Which programmer can be used? (MPRG8974.mbn)
MiFlash
- Wrong programmer (error 0x8007000b).
BoardDiag
- How to prepare the partition.txt and extract the fw_image?
QBoot
- How to prepare the singleimage.bin?
QMSCT_DL_EMMC_TOOL
- Partitions are not recognized
Noone knows, Poke around and if you find anything, post here so we get to know too.
Little better situation for me ...
From TWRP Recovery, I restarted to system before flashing CM ROM and now I could not get to TWRP Recovery. Of course the phone is stuck at AMAZON logo while booting with no ROM installed. I could get into Fire's Recovery which is very constrained. I have just got access to ADB Sideload. Even when i tried to sideload the Fire OS Stock Rom, it failed at signature Verification. How do I toggle signature verification off when i give the command "adb sideload rom.zip" . Is anyone aware of any switch that I can append to toggle off the verification checking?? All Android Gurus out there... Kindly share your valuable suggestion... Thanks ..
manojvasanthram said:
Even when i tried to sideload the Fire OS Stock Rom, it failed at signature Verification. How do I toggle signature verification off when i give the command "adb sideload rom.zip"
Click to expand...
Click to collapse
The stock recovery doesn't support ZIP files, it's only for sideloading official BIN files released by Amazon.
Bingo Bronson said:
The stock recovery doesn't support ZIP files, it's only for sideloading official BIN files released by Amazon.
Click to expand...
Click to collapse
I did try the bin files. it threw up assert error for the device name "kodiak ,.. then i edited the relevant part of the script inside the bin file and rebuilt it and tried to side load, but the signature verification failed. Can you please let me know where can i get the signed versions of stock rom for Fire phone ?
Thanks
Any luck brother with this issue? We r on the same boat
BetaIQ said:
Hello,
has anyone found a solution how to debrick the hard bricked FirePhone (64 GB)?
Currently the phone is recognized as QHSUSB_BULK -> Qualcomm HS-USB QDLoader 9008.
I tried the following tools for recovery:
ADB and FastBoot
- Cannot found device.
QFIL
QPST
- Which programmer can be used? (MPRG8974.mbn)
MiFlash
- Wrong programmer (error 0x8007000b).
BoardDiag
- How to prepare the partition.txt and extract the fw_image?
QBoot
- How to prepare the singleimage.bin?
QMSCT_DL_EMMC_TOOL
- Partitions are not recognized
Click to expand...
Click to collapse
Ive read we need a system image of a running phone and flash it onto the bricked one to make it work, but I dont see any practical solution to this problem. I am a newbee, dont hae much knowledge. In experimenting, I have also deleted its eMMC paritions. Now, even the eMMC is not detected on the PC. Just connecting Qualcomm HS_USB QDLoad 9008 (Com4).
while I was flash my gx8 it become soft brick no fastboot no recovery no boot it read as Qualcomm HS USB QDLoader 9008 need rom with xml scatter need help
Tried flashing with qfil, all versions of mi flash, cmd flash., deep flash cable method. All failed with read packed error. Can anyone help me out. Thanks