Hello guys,
I think I ****ed up. My recovery mode isn't working anymore, after I tried to install an update while TWRP was installed. I tried to flash it with TWRP and also with the stock recovery image. It doesn't help, the screen stays black after I try to boot into recovery mode. I flashed the recovery partition about a hundred times by now. It's still not working. The stock system (Oxygen 3.5.2) and fastboot is working, but in order to update Oxygen, I apparently need a working recovery mode.
I don't care about the data on the phone - I just want a working recovery mode . Can you guys help?
Regards
Which TWRP did you use? Why are you even on 3.5.2 that's some sold stuff.
Puddi_Puddin said:
Which TWRP did you use? Why are you even on 3.5.2 that's some sold stuff.
Click to expand...
Click to collapse
I think it was TWRP 3.0.2.1. To be honest: I can't tell you how I ended up with 3.5.2, because I did a lot of weird stuff yesterday to fix the problem...
You need modified TWRP
Try this:
Fastboot erase recovery
Fastboot flash recovery modified-recovery.img
Puddi_Puddin said:
You need modified TWRP
Try this:
Fastboot erase recovery
Fastboot flash recovery modified-recovery.img
Click to expand...
Click to collapse
The modified TWRP image worked! Thanks for saving me!
Related
So, I have the X9046 variant, and I've tried to use the TWRP recovery here.
I went into fastboot, did fastboot flash recovery <recoverynamehere>.img, with no errors. But, when I reboot into recovery it goes into the stock recovery.
I even did fastboot boot <recoverynamehere>.img, and it would just be stuck in fastboot, until I forced a reboot.
Any ideas?
Griffrez said:
So, I have the X9046 variant, and I've tried to use the TWRP recovery here.
I went into fastboot, did fastboot flash recovery <recoverynamehere>.img, with no errors. But, when I reboot into recovery it goes into the stock recovery.
I even did fastboot boot <recoverynamehere>.img, and it would just be stuck in fastboot, until I forced a reboot.
Any ideas?
Click to expand...
Click to collapse
try this if you have trouble...
http://forum.xda-developers.com/find-7/development/recovery-recovery-installer-7-t2819794
lesscro said:
try this if you have trouble...
http://forum.xda-developers.com/find-7/development/recovery-recovery-installer-7-t2819794
Click to expand...
Click to collapse
I've used that before, and I've had the same problem.
No error during process ?
What are your build ?
stock or custom rom ?
Did you try to unlock bootloader ?
Griffrez said:
So, I have the X9046 variant, and I've tried to use the TWRP recovery here.
I went into fastboot, did fastboot flash recovery <recoverynamehere>.img, with no errors. But, when I reboot into recovery it goes into the stock recovery.
I even did fastboot boot <recoverynamehere>.img, and it would just be stuck in fastboot, until I forced a reboot.
Any ideas?
Click to expand...
Click to collapse
If you're running ColorOS, there might be a script that's part of ColorOS that restores the stock recovery. Not sure. (It's a common thing to see in most OEM firmware releases)
I installed CM 11 on my Xiaomi redmi 1s,everything was working fine except for 2 or 3 little things but a major problem occurred when I thought of flashing another ROM and now I CANT ACCESS RECOVERY MODE no matter what I try. I tried the button combination(power switch+volume up), tried adb and even tried apps like ROM Manager and, TWRP Manager and quick boot but haven't found any luck. Whenever I try to boot into recovery the phone gets stuck on the MI boot logo. I need to flash another rom and can't seem to find any other way to wipe y phone data, cache and dalvik cache and so I need help to counter this issue.
Please help me.
Dishagra said:
I installed CM 11 on my Xiaomi redmi 1s,everything was working fine except for 2 or 3 little things but a major problem occurred when I thought of flashing another ROM and now I CANT ACCESS RECOVERY MODE no matter what I try. I tried the button combination(power switch+volume up), tried adb and even tried apps like ROM Manager and, TWRP Manager and quick boot but haven't found any luck. Whenever I try to boot into recovery the phone gets stuck on the MI boot logo. I need to flash another rom and can't seem to find any other way to wipe y phone data, cache and dalvik cache and so I need help to counter this issue.
Please help me.
Click to expand...
Click to collapse
Flash any custom recovery via fastboot mode
Download .img format of custom recovery
Boot into fastboot mode n run this command on CMD
fastboot flash recovery <filename>.img
Filename can be anything depending on name of image file you download
Not Working for me
RajGopi said:
Flash any custom recovery via fastboot mode
Download .img format of custom recovery
Boot into fastboot mode n run this command on CMD
fastboot flash recovery <filename>.img
Filename can be anything depending on name of image file you download
Click to expand...
Click to collapse
I am afraid this solution doesn't work for me. My thoughts are that I have somehow lost my recovery partition. I accidently installed CM 11 without first installing a custom recovery. My bad! but have yet to find a solution that works.
Try flashing a recovery using Rashr-flashtool
And boot to recovery (Vol up + Power , for 10s even after screen is on )
Solved
Shahi00 said:
Try flashing a recovery using Rashr-flashtool
And boot to recovery (Vol up + Power , for 10s even after screen is on )
Click to expand...
Click to collapse
I solved my problem by using Flashify app but I had to use it every time as recovery would not stick. I flashed trwp and installed stock (english version) rom and stock recovery and everything is working fine again. I will not make the same mistake again. I have since installed CWM recovery through stock recovery so now I can flash roms in peace again.
Waxwrong said:
I solved my problem by using Flashify app but I had to use it every time as recovery would not stick. I flashed trwp and installed stock (english version) rom and stock recovery and everything is working fine again. I will not make the same mistake again. I have since installed CWM recovery through stock recovery so now I can flash roms in peace again.
Click to expand...
Click to collapse
i have the same problem how to solve it please describe it briefly ^^
Hi guys i flashed the 3.5.3 CM today but i decided to go back with 3.26 again, so i followed a guide that tells me to install stock recovery over twrp before i install the rom but after i fastboot flash the recovery i cannot go into the recovery anymore.
i tried to flashed the modified twrp and then boot to recovery but still wont open it.
the phone works and can go into fastboot still but it just wont access recovery
anyway to fix it? sorry if this has been discussed before. im on a mac for more info
TIA
1+3
Is your OS booting?
yea
Got the same problem here. Can boot into system and fastboot but if boot to recovery i get the oneplus logo and the bootloaderscreen and then i get a black screen where i should get my recovery. And if wanna Force shutdown my oneplus it freezes somehow. I tried everything to fix this with no result. Stock recovery doesnt work too.
Hi I just had the same problem, I have sent it back to Oneplus for repair. According to the ticket, I had a faulty motherboard, which has been replaced. If you can, do it. I only had to wait for a week before it was sent back.
Had the same problem last night. Following method nr 2 in thos thread solved it.
http://forum.xda-developers.com/showthread.php?t=3405700
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
using fastboot to wipe the recovery partition then fastboot flashing modified twrp twice worked for me, i think the oneplus recovery image thats doing the rounds doesn't want to play nice lol
If youre phone boots in to system, download Flashify from play, flash recovery.img (you need to extract .img file). Go to recovery to check if it works. If not try other recovery.
after flashing the community build i cant boot my device in fastboot mode, it wont start the recovery or boot the system sucessfully.
danxtian said:
Hi guys i flashed the 3.5.3 CM today but i decided to go back with 3.26 again, so i followed a guide that tells me to install stock recovery over twrp before i install the rom but after i fastboot flash the recovery i cannot go into the recovery anymore.
i tried to flashed the modified twrp and then boot to recovery but still wont open it.
the phone works and can go into fastboot still but it just wont access recovery
anyway to fix it? sorry if this has been discussed before. im on a mac for more info
TIA
Click to expand...
Click to collapse
If your device is unlocked, flash the recovery.img from fastboot.
You can download TWRP for oneplus 3 from their site.
Rename the downloaded recovery to recovery.img.
And open fastboot in the path of the recovery image.
Use the command:
Code:
fastboot flash recovery recovery.img
Hopefully this helps
g3ck08 said:
If your device is unlocked, flash the recovery.img from fastboot.
You can download TWRP for oneplus 3 from their site.
Rename the downloaded recovery to recovery.img.
And open fastboot in the path of the recovery image.
Use the command:
Code:
fastboot flash recovery recovery.img
Hopefully this helps
Click to expand...
Click to collapse
managed to fix it the other day, by flashing the modded twrp.. somehow that one worked after that i flashed the 3.26 plus the 3.26 modem ones because if i didnt, my touch screen wont work...
For me, I flashed the twrp from fastboot.
But still the 1+ logo shows when I try to boot in to recovery for 5 sec and shuts down with 2 dots of lights in the navigation button area
The normal boot is working fine. Did flash the recovery using apps like TWRP Manager, Flashify etc. It will show successfulll. But when I try to boot in to recovery, same result.
Please help
I was on OOS community build 3.5.3 with modified twrp-3.0.2-19-oneplus3.
I wiped everything except internal storage after that I tried to flash official TWRP.
After installing official twrp via modified TWRP. Niether I can boot into my recovery nor able to install any recovery via fastboot.
it I use "fastboot flash recovery recovery.img"
after installing recovery with this command My bootloader get stuck then I have to again restart my bootloader.
please help
You're probably stil on 3.5.2 firmware which isnt compatible with official twrp. Try and get into fastboot and try flashing modified twrp again. Then reboot in recovery and flash 3.2.6 firmware (not the rom) from modified twrp. Then reboot and flash official twrp from recovery or in flashify app.
i had this problem the other day, fixed this by flashing the modified recovery from a post here turn it off the booted it up by holding vol down + power and somehow it worked i was able to go into twrp
innocentwoolf said:
I was on OOS community build 3.5.3 with modified twrp-3.0.2-19-oneplus3.
I wiped everything except internal storage after that I tried to flash official TWRP.
After installing official twrp via modified TWRP. Niether I can boot into my recovery nor able to install any recovery via fastboot.
it I use "fastboot flash recovery recovery.img"
after installing recovery with this command My bootloader get stuck then I have to again restart my bootloader.
please help
Click to expand...
Click to collapse
I have same issue it is called half-brick go to full brick post here (http://forum.xda-developers.com/oneplus-3/how-to/guide-mega-unbrick-guide-hard-bricked-t3405700)
read whole post and prefer method 2 it will work like charm and i got when i am installing freedom os CE version and if it work then thank me
are you stuck with a black screen when booting to recovery if yea then wits the same situation i was in.
http://forum.xda-developers.com/showpost.php?p=68691560&postcount=56 that recovery helped me
Seagorilla2 said:
You're probably stil on 3.5.2 firmware which isnt compatible with official twrp. Try and get into fastboot and try flashing modified twrp again. Then reboot in recovery and flash 3.2.6 firmware (not the rom) from modified twrp. Then reboot and flash official twrp from recovery or in flashify app.
Click to expand...
Click to collapse
yes.. tried that only and it worked...
thanks
danxtian said:
are you stuck with a black screen when booting to recovery if yea then wits the same situation i was in.
http://forum.xda-developers.com/showpost.php?p=68691560&postcount=56 that recovery helped me
Click to expand...
Click to collapse
that helped me to thanks
hi'
i have flashed cm14 nightly with aroma (gapps) on cm13 on my oneplus 3
now i couldn't go neither to recovery mode nor to current cm 14 rom to change my rom
i am out of ideas i tried in every possible way to my knowledge pleasee help me ........................
Flash the modified twrp 3.0.2-22 via fastboot.
Get modified twrp here i asume that you know how to flash it?
Boot in fastboot > fastboot flash recovery Recovery filename.img
I had the same problem. Flashing modified twrp worked for me, thanks! But now if I to flash stock recovery (to install otas), I can't boot to recovery. E: oxygenos otas can be installed with twrp, so no problem anymore
plz send me the link of modified twrp
i coudnt find it on google properly plz
Try the link given by Demian3112. It works
THQ thq soon much.. Its working
Demian3112 said:
Get modified twrp here i asume that you know how to flash it?
Boot in fastboot > fastboot flash recovery Recovery filename.img
Click to expand...
Click to collapse
Yes its working
Thank q very much
THQ thq soon much.. Its working
AJay27 said:
Try the link given by Demian3112. It works
Click to expand...
Click to collapse
THQ for ur valuable suggestion
My killer is back
Demian3112 said:
Get modified twrp here i asume that you know how to flash it?
Boot in fastboot > fastboot flash recovery Recovery filename.img
Click to expand...
Click to collapse
Hii,
Still the problem remains same I will explain in detail
I am back to cm14.1 when I flashed twrp from the above link
When I tried to flash some other ROMs they are flashed but screen goes blank after oneplus boot animation,
If I flash 14.1 ROM it is working fine
From cmd non of the recovery where flashed only the above is working
Plz help me
I want to go back to stock soon
It's because of the system partition rewriting issue. People in the cm and other communities are already working on it. Basically the boot partitions get rewritten when we install the cm 14.1 . It happens to some variants while others works fine. Just the issue because of not enough testing. Will be sorted out within time.
What you can do is. Use flashify app or fastboot from your pc and flash your twrp back after installing and booting into the cm 14.1. You can use any twrp no modified versions needed as far as it is supported by your device model. Ciao. Hit thanks if i helped.
sanjumalik720 said:
It's because of the system partition rewriting issue. People in the cm and other communities are already working on it. Basically the boot partitions get rewritten when we install the cm 14.1 . It happens to some variants while others works fine. Just the issue because of not enough testing. Will be sorted out within time.
What you can do is. Use flashify app or fastboot from your pc and flash your twrp back after installing and booting into the cm 14.1. You can use any twrp no modified versions needed as far as it is supported by your device model. Ciao. Hit thanks if i helped.
Click to expand...
Click to collapse
ohhh
then what is the solution ?????
Thank you very much
Demian3112 said:
Get modified twrp here i assume that you know how to flash it?
Boot in fastboot > fastboot flash recovery Recovery filename.img
Click to expand...
Click to collapse
I had the same problem as OP, got stuck with the CM 14 and did not like it (to early, to many bugs)
Wanted to go back to CM 13 but was unable to get into TWRP, and unable to flash CM13 back. Tried with fastboot and adb sideload, nothing worked.
The modified TWRP let me do i full wipe of the phone, (wiped Data, Dalik/ART, and system.) then copied the CM13 Stable release from here onto the phone, together with Gapps, and now everything is back to normal.
Again thank you, and thanks XDA! Somehow you always manage to save my ass after i messed with my device
Balaji Dasari said:
ohhh
then what is the solution ?????
Click to expand...
Click to collapse
Just flash the twrp image file again. The one you used before. Just flash it again. The same way you did back then.