htc 10 / How can i go back stock rom? - HTC 10 Questions & Answers

hi,
How can i go back stock rom (with boot, recovery, etc.) from Viper 10 4.5.0?
***************************************
hTC download mode
*** UNLOCKED ***
htc_pmeuh1 PVT S-ON
LK-1.0.0.0000
[email protected]
OpenDSP-v18.3.8996.00524_0721
OS-1.95.401.3
Aug 31.2016, 15:01:14(797255)
***************************************
Thanks in advance.

You could try looking in the guides section.
https://forum.xda-developers.com/htc-10/how-to/stock-stock-collection-recovery-ruu-ota-t3359297

squ89r97 said:
You could try looking in the guides section.
https://forum.xda-developers.com/htc-10/how-to/stock-stock-collection-recovery-ruu-ota-t3359297
Click to expand...
Click to collapse
I checked everwhere but unfortunately there is no file for 1.95.401.3

ferhatpeker said:
I checked everwhere but unfortunately there is no file for 1.95.401.3
Click to expand...
Click to collapse
Then just use the 1.95.401.5 stock signed ruu, only if your cid and mid match that is.

squ89r97 said:
Then just use the 1.95.401.5 stock signed ruu, only if your cid and mid match that is.
Click to expand...
Click to collapse
I downloaded it but it is not exe,
I dont know how zip files can be installed since its S-ON and OS version is different between my phone and downloaded file.

ferhatpeker said:
I downloaded it but it is not exe,
I dont know how zip files can be installed since its S-ON and OS version is different between my phone and downloaded file.
Click to expand...
Click to collapse
No it's not an exe, it says it's a zip. Zip ruu's can be placed on the root of your external SD renamed appropriately and flashed in bootloader. Just do a little searching for flashing ruu via SD card method and it'll give you the file name it needs to be renamed to.

squ89r97 said:
No it's not an exe, it says it's a zip. Zip ruu's can be placed on the root of your external SD renamed appropriately and flashed in bootloader. Just do a little searching for flashing ruu via SD card method and it'll give you the file name it needs to be renamed to.
Click to expand...
Click to collapse
sorry, i have been searching for 3 days everywhere
can i do it as you mentioned (flashing ruu via SD card method) on S-ON phone?

ferhatpeker said:
sorry, i have been searching for 3 days everywhere
can i do it as you mentioned (flashing ruu via SD card method) on S-ON phone?
Click to expand...
Click to collapse
Pretty sure you can only flash signed firmware with s-on and you are.
You can only flash the same or higher firmware also.

squ89r97 said:
Pretty sure you can only flash signed firmware with s-on and you are.
You can only flash the same or higher firmware also.
Click to expand...
Click to collapse
Thank you very much, it works.

ferhatpeker said:
If you are sure i will flash below named RUU with SD card method
My phone version is 1.95.401.3 and S-ON, CID and MID are ok, and its higher than my OS version...
2PS6IMG_PERFUME_UHL_N70_SENSE80GP_HTC_Europe_2.28.401.9
Is it ok?
Click to expand...
Click to collapse
Dude, I'm just giving you advice, not telling you to do it or saying it'll be 100% fine. Everything I have learnt, I've leant from xda. I know you've been reading for 3 days, but read for another 3 days or weeks, just to be sure.

squ89r97 said:
Dude, I'm just giving you advice, not telling you to do it or saying it'll be 100% fine. Everything I have learnt, I've leant from xda. I know you've been reading for 3 days, but read for another 3 days or weeks, just to be sure.
Click to expand...
Click to collapse
Sorry man, i flashed it so it works. Thank you very much. no more 3 days i have to work...

ferhatpeker said:
Sorry man, i flashed it so it works. Thank you very much. no more 3 days i have to work...
Click to expand...
Click to collapse
You're welcome dude, glad it worked out well for you.

Related

[Q] Won't boot after RUU flash from Revolutionary

I have been searching for two days and have not found a solution!
My CID is HTC__001
I did have Revolutionary installed (phone from eBay) but I decided to go to stock (thought I'd try it before the modding, need to install ICS for a project I'm working on) so I used "bravo_downgrade" (using Fastboot) and then used the latest RUU(RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed) to flash it.
My current state is: S-ON, HBOOT-0.93.0001, RADIO-5.11.05.27
Phone won't boot, when flashed from SD it just reboot looped and now it just hangs on the HTC screen.
I have tried different ROMs and using an SD card OTA ZIP file numerous times.
Thanks!
use the pb99img method to flash same ruu
Droidzone said:
use the pb99img method to flash same ruu
Click to expand...
Click to collapse
Thanks, where would I find a ZIP of the RUU? I can only find ZIP files for OTA.
CallumA said:
Thanks, where would I find a ZIP of the RUU? I can only find ZIP files for OTA.
Click to expand...
Click to collapse
You can make it yourself! http://bit.ly/tdHcaa
Droidzone said:
You can make it yourself!
Click to expand...
Click to collapse
Nope, restored using the extracted ZIP and same reboot loop. Thanks anyway.
EDIT: I didn't have a SIM installed while doing this, would that have affected it? Also, this is an AMOLED desire.
That more or less confirms a hardware issue.
Droidzone said:
That more or less confirms a hardware issue.
Click to expand...
Click to collapse
Could I have caused it by flashing stuff? It worked (albeit with countless mods installed) when I recieved it from eBay.
I just left if off for a while and it's working now! Thanks!!!

Can't get wifi to work/can't figure out which firmware to use

I have an AT&T HTC M8, I believe it is on 4.4.2, and I tried flashing ARHD and got the dreaded no wi-fi problem, and I can't figure out for my life which firmware to use that will let me use wi-fi. I've been looking through the internet since 2 AM this morning, so any help would be great.
http://forum.xda-developers.com/showthread.php?t=2824048
Follow the directions and flash the latest firmware.
manlavi95 said:
I have an AT&T HTC M8, I believe it is on 4.4.2, and I tried flashing ARHD and got the dreaded no wi-fi problem, and I can't figure out for my life which firmware to use that will let me use wi-fi. I've been looking through the internet since 2 AM this morning, so any help would be great.
Click to expand...
Click to collapse
When you say that, based on the time your post was made(for my time zone) you haven't been looking for very long...
Today, 02:09 AM | #1 <<< A whole 9minutes
BerndM14 said:
When you say that, based on the time your post was made(for my time zone) you haven't been looking for very long...
Today, 02:09 AM | #1 <<< A whole 9minutes
Click to expand...
Click to collapse
Hahaha it's been about 13 hours here
chuck24 said:
http://forum.xda-developers.com/showthread.php?t=2824048
Follow the directions and flash the latest firmware.
Click to expand...
Click to collapse
I'm stuck at the "4. Boot into hboot and READ, INTERNALIZE, & then EXECUTE and let it update its firmware."
How do I read, internalize, and execute it? The directions for this are very scattered.
Im assuming your phone is S-OFF?
Before this, was your phone updated by any OTA's? This is just to confirm that you were on 4.4.2.
I am S-off, but yes, firewater told me I took an OTA (must have happened before I bought the phone) so I had to use Sunshine or whatever, now I'm S-off and don't know what to do next.
manlavi95 said:
I'm stuck at the "4. Boot into hboot and READ, INTERNALIZE, & then EXECUTE and let it update its firmware."
How do I read, internalize, and execute it? The directions for this are very scattered.
Click to expand...
Click to collapse
When you reboot the phone to bootloader you'll notice a couple of options that you can select one of them is "HBOOT" I think it's written in blue.
Select it with the volume up or down key and press power to go in, it'll then show a scrolling of I think it's green text where it's looking for files on sd card. It should pick up your renamed firmware file and give you option to update with it.
Hmm, I moved the renamed file (renamed to 0P6BIMG.zip) to external SD through TWRP, but when I go into Hboot, it doesn't do anything. I feel like it's something obvious.
manlavi95 said:
Hmm, I moved the renamed file (renamed to 0P6BIMG.zip) to external SD through TWRP, but when I go into Hboot, it doesn't do anything. I feel like it's something obvious.
Click to expand...
Click to collapse
Maybe try and move it to internal storage. Check that it's named correctly, a ZERO (0) and not a O <Capital o... Make sure it's .zip and not .zip.zip else...
Do it manually with mike1986.'s flash guide.
Can I get a link to that?
manlavi95 said:
Can I get a link to that?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2696282 <Mike's guide.
http://forum.xda-developers.com/htc-one-m8/development/progress-fuu-m8-t2813792 <SneakyGhost's guide.
chuck24 said:
http://forum.xda-developers.com/showthread.php?t=2824048
Follow the directions and flash the latest firmware.
Click to expand...
Click to collapse
BerndM14 said:
http://forum.xda-developers.com/showthread.php?t=2696282 <Mike's guide.
http://forum.xda-developers.com/htc-one-m8/development/progress-fuu-m8-t2813792 <SneakyGhost's guide.
Click to expand...
Click to collapse
See, I tried that, but I can't seem to find a firmware for ATT that is 3.28.401.6
manlavi95 said:
See, I tried that, but I can't seem to find a firmware for ATT that is 3.28.401.6
Click to expand...
Click to collapse
Well that's logical isn't it? AT&T doesn't use x.xx.401.x. Even if you do flash the latest 3.x firmware on your device you'll probably have problems seeing as the radio's are different.
Rather go with the Developer Edition 3.x firmware. AT&T and Dev Edition share same radio, MID etc. It's the 3.28.1540.5 firmware you can find it in the OTA zip collection.
OTA ZIP COLLECTION
Just download the OTA and extract the firmware.zip file from the OTA.zip. If you flash the 3.28.401.x you might have issues with LTE etc
BerndM14 said:
Well that's logical isn't it? AT&T doesn't use x.xx.401.x. Even if you do flash the latest 3.x firmware on your device you'll probably have problems seeing as the radio's are different.
Rather go with the Developer Edition 3.x firmware. AT&T and Dev Edition share same radio, MID etc. It's the 3.28.1540.5 firmware you can find it in the OTA zip collection.
OTA ZIP COLLECTION
Just download the OTA and extract the firmware.zip file from the OTA.zip. If you flash the 3.28.401.x you might have issues with LTE etc
Click to expand...
Click to collapse
2.22.1540.4 -> 3.28.1540.5 thanks
^This one? This one will work with my ATT phone the right way? I'm sorry I'm such a noob to all of this. I'm used to flashing a rom and continuing about my normal life.
manlavi95 said:
2.22.1540.4 -> 3.28.1540.5 thanks
^This one? This one will work with my ATT phone the right way? I'm sorry I'm such a noob to all of this. I'm used to flashing a rom and continuing about my normal life.
Click to expand...
Click to collapse
Yes
BerndM14 said:
Yes
Click to expand...
Click to collapse
Thank you for your help, I'll follow up in about 10 minutes
Yeap that zip should work, @BerndM14 beat me to it. I really need to bookmark all these threads.
Just make sure you flash it twice without leaving the RUU flash screen.
bloodhawk said:
Yeap that zip should work, @BerndM14 beat me to it. I really need to bookmark all these threads.
Just make sure you flash it twice without leaving the RUU flash screen.
Click to expand...
Click to collapse
BerndM14 said:
Yes
Click to expand...
Click to collapse
"FAILED (remote: 42 custom id check fail)"
bloodhawk said:
Just make sure you flash it twice without leaving the RUU flash screen.
Click to expand...
Click to collapse
Yes, very important. I left it out, going on the assumption that he'll follow mike's guide where it says to flash twice...
Yes, I know...
Don't assume, it makes an ass(out of)u(and)me :silly:

[q]help!!!!!! I need twrp backup h3g

Hi could do with a TWRP BACKUP UNROOTED 1.32.771.6 H3G stupidly deleted mind
Mr Troop said:
Hi could do with a TWRP BACKUP UNROOTED 1.32.771.6 H3G stupidly deleted mind
Click to expand...
Click to collapse
wassup? i may have it.. are you sure you need it?#
may be worth going here
http://androidruu.com/?developer=M9
nutmegy said:
wassup? i may have it.. are you sure you need it?#
may be worth going here
http://androidruu.com/?developer=M9
Click to expand...
Click to collapse
Hello thanks for that downloaded both but no joy?
What's actually wrong?
nutmegy said:
What's actually wrong?
Click to expand...
Click to collapse
I deleted my clean TWRP back up so i can OTA, i need yours if you have one,i tried 0PJAIMG.zip no luck nothing happens
My phone is working but if i apply OTA it will just fail
How do you mean nothing happens when you try the RUU? that should work... Are you flashing it correctly?
nutmegy said:
How do you mean nothing happens when you try the RUU? that should work... Are you flashing it correctly?
Click to expand...
Click to collapse
Put zip on sd card put phone in download mode and it should scan but nothing happens!!!
Please tell me another way
Mr Troop said:
Put zip on sd card put phone in download mode and it should scan but nothing happens!!!
Please tell me another way
Click to expand...
Click to collapse
from adb..
hooking your phone up and putting the RUU into the folder on your PC... and
follow the first few instructions
http://forum.xda-developers.com/one-m9/general/htc-one-m9-dump-t3060545
unfortunately i havent got my TWRP backup... thought i did .. soz!
nutmegy said:
from adb..
hooking your phone up and putting the RUU into the folder on your PC... and
follow the first few instructions
http://forum.xda-developers.com/one-m9/general/htc-one-m9-dump-t3060545
unfortunately i havent got my TWRP backup... thought i did .. soz!
Click to expand...
Click to collapse
No joy error cannot load zip
Mr Troop said:
No joy error cannot load zip
Click to expand...
Click to collapse
okay...
maybe even rename the stupidly long filename into something short..
check the MD5 sum from the RUU site make sure yours matches
other people in this thread seem to be using them fine
http://forum.xda-developers.com/one-m9/general/htc-one-m9-dump-t3060545
nutmegy said:
okay...
maybe even rename the stupidly long filename into something short..
check the MD5 sum from the RUU site make sure yours matches
other people in this thread seem to be using them fine
http://forum.xda-developers.com/one-m9/general/htc-one-m9-dump-t3060545
Click to expand...
Click to collapse
Still same no joy renamed ruu.zip firmware .zip all error cannot load zip i did try that already need a clean nandroid :good:
Mr Troop said:
Still same no joy renamed ruu.zip firmware .zip all error cannot load zip i did try that already need a clean nandroid :good:
Click to expand...
Click to collapse
Sorry dude..
wish i could've helped...
nutmegy said:
Sorry dude..
wish i could've helped...
Click to expand...
Click to collapse
No probs thanks for your help
Got it to work,I pulled the OTA from my phone
then pulled the firmware zip from the OTA
flashed that and went with the sd card 0PJAIMG.zip Ruu and bingo OTA from 1.32.771.6 - 132.771.15 successful
Nice one!!
Can I ask how you pulled the OTA from your phone?
I desperately need the stock recovery for my phone.
I'm running TWRP but need to return to stock to send back to HTC for a repair.
Cheers
Sent from my HTC One M9 using Tapatalk

Bricked htc one m9 (urgent help!!)

Hi guys. I just bricked my HTC one m9. I was trying to get it back to stock while I had a custom rom, and I set s-on back to true and locked the bootloader..
Fastboot DOES work.
I cannot enter the custom recovery mode, it says that it failed to boot to recovery.
I cannot boot into my custom rom.
I DO have an SD card. I tried to flash the RUU "0PJAIMG.zip", but it said "failed to flash downloadzip" and didn't flash..
What should I do at this point? I don't want $700 down the drain
1) What is your CID?
2) you flash RUU via SDcard?
3) If you ever got your phone back to normal. DO NOT ATTEMPT TO TURN S-OFF BACK TO TRUE, AND LOCKED YOUR BOOTLOADER. BECAUSE ITS NOT NEEDED AT ALL.
I tried to flash an RUU via SD card, but it gave me that error posted above.
My CID is 11111111
OfficialBlox said:
I tried to flash an RUU via SD card, but it gave me that error posted above.
My CID is 11111111
Click to expand...
Click to collapse
What's your actual firmware version? (The one that is stated in Download Mode in the line with "OS" at the beginning?)
once i auto-bricked my phone, ereasing everuthing with twrp, everything......i did enter into bootloader i guess or download mode (dont remeber very well) and with cid BS_US001 i did flash a Ruu-Zip for developer 2.8 and the after that i could restore everything....hopefully yoiu can do the same
Flippy498 said:
What's your actual firmware version? (The one that is stated in Download Mode in the line with "OS" at the beginning?)
Click to expand...
Click to collapse
My OS is 2-8.617.4
OfficialBlox said:
My OS is 2-8.617.4
Click to expand...
Click to collapse
This might be the RUU you need. (2.11.617.15) Its a newer version of 2.8.617.4
Credits clsA
xunus said:
This might be the RUU you need. (2.11.617.15) Its a newer version of 2.8.617.4
Credits clsA
Click to expand...
Click to collapse
Thanks. So does it matter if I am s-on and locked bootloader?
Also, I have an SD card so that's good.
OfficialBlox said:
Thanks. So does it matter if I am s-on and locked bootloader?
Also, I have an SD card so that's good.
Click to expand...
Click to collapse
Because this is a official RUU for the .617. Which matches your OS version. I can only hope it works since you are S-ON and LOCKED
xunus said:
Because this is a official RUU for the .617. Which matches your OS version. I can only hope it works since you are S-ON and LOCKED
Click to expand...
Click to collapse
Okay, I'm currently downloading the file. Let's hope it works. thanks.
OfficialBlox said:
Thanks. So does it matter if I am s-on and locked bootloader?
Also, I have an SD card so that's good.
Click to expand...
Click to collapse
If you're using the SD Card method it doesn't matter at all whether your bootloader is locked or not. And as long as the RUU is the same version as your actual firmware (or if the RUU is newer) it doesn't matter whether your phone is S-ON or S-OFF.
The SD card has to be formated to fat32 and mustn't be bigger than 32gb. Copy the RUU to the main directory of the card and rename it to "0PJAIMG.zip" (that's a zero not an O). If you then put the card back into your phone and reboot to download mode you just have to follow the instructions on the phone's screen.
Let's say I were to flash the wrong firmware version RUU (which I did, and the installation failed), would it say something like "failed to flash zip downloadzip", because that's what it said.
OfficialBlox said:
Let's say I were to flash the wrong firmware version RUU (which I did, and the installation failed), would it say something like "failed to flash zip downloadzip", because that's what it said.
Click to expand...
Click to collapse
Which method did you use? If you used the SD Card method: Are file extensions visible on your pc? If not the file may be named "0PJAIMG.zip.zip" now...
I used the SD card method, but the firmware version was wrong. I just want to know if it would stop me with an error, instead of actually installing the RUU.
OfficialBlox said:
I used the SD card method, but the firmware version was wrong. I just want to know if it would stop me with an error, instead of actually installing the RUU.
Click to expand...
Click to collapse
Since you're S-ON you can't harm your phone with a "wrong" RUU. If it's incompatible it simply won't flash.
Edit with some alternative solutions: There is a RUU.exe for your specific firmware on ir-file. But you need to pay if you want to download there. (At least if there is no xda member who already has an account and is willing to help.) Or you try this RUU Service. But that one isn't for free, either.
OfficialBlox said:
Okay, I'm currently downloading the file. Let's hope it works. thanks.
Click to expand...
Click to collapse
Ohh my, locked and Son...May the force be with you...always.
I do believe the only option would be to download a Ruu-EXE from HTC Developers and run it from PC, also phone must connected in download mode or recovery, hopefully you do it for good.................
OR.....................................MAKE USE OF THE UH-OH GUARANTEE, step the phone under the water for 20 mins or crush the screen and take it to your vendor, they should replace phone with no questions for one completly new as guarantee states!!!!!
In Mexico, Telcel they do Honor this special guarantee
LLegion said:
Ohh my, locked and Son...May the force be with you...always.
I do believe the only option would be to download a Ruu-EXE from HTC Developers and run it from PC, also phone must connected in download mode or recovery, hopefully you do it for good.................
OR.....................................MAKE USE OF THE UH-OH GUARANTEE, step the phone under the water for 20 mins or crush the screen and take it to your vendor, they should replace phone with no questions for one completly new as guarantee states!!!!!
In Mexico, Telcel they do Honor this special guarantee
Click to expand...
Click to collapse
So the RUU.zip that someone linked me won't work? I just spent hours downloading it lol
OfficialBlox said:
So the RUU.zip that someone linked me won't work? I just spent hours downloading it lol
Click to expand...
Click to collapse
I could be wrong but I would say it should work. I don't see a reason why it shouldn't.
OfficialBlox said:
So the RUU.zip that someone linked me won't work? I just spent hours downloading it lol
Click to expand...
Click to collapse
If you met all the conditions listed by @Flippy498 in post #11 it will work just fine
also the newest Developer Edition RUU can be found here direct from HTC >> http://www.htc.com/us/support/htc-one-m9/news/

Hekp me pls !

I just got the htc m9u, its Taiwan manufacturer i have android 5.0.1 ( 1.40.709.4) and my phone is detecting an update to 1.40.709.8 . Then it starts to download the firmware but it fails to apply, (aborted) I really need your help, this is my first time with HTC. :good::good:
danieldp1990 said:
I just got the htc m9u, its Taiwan manufacturer i have android 5.0.1 ( 1.40.709.4) and my phone is detecting an update to 1.40.709.8 . Then it starts to download the firmware but it fails to apply, (aborted) I really need your help, this is my first time with HTC. :good::good:
Click to expand...
Click to collapse
Sounds like the phone is rooted or the system has otherwise been modified. If so, you need to ruu, or restore an unmodified system image backup (I doubt you have one or you wouldn't be asking for help) to return to stock before ota will work.
jollywhitefoot said:
Sounds like the phone is rooted or the system has otherwise been modified. If so, you need to ruu, or restore an unmodified system image backup (I doubt you have one or you wouldn't be asking for help) to return to stock before ota will work.
Click to expand...
Click to collapse
How is all that? all I know is that S-0N
danieldp1990 said:
How is all that? all I know is that S-0N
Click to expand...
Click to collapse
Did you buy it brand new or second hand? Maybe if you bought it from someone they rooted it?
jollywhitefoot said:
Did you buy it brand new or second hand? Maybe if you bought it from someone they rooted it?
Click to expand...
Click to collapse
from second hand yes
danieldp1990 said:
from second hand yes
Click to expand...
Click to collapse
Read this thread. It will help you return to stock ago you can update using ota. But honestly, if you don't know what an ruu is, it's probably over your head.
http://forum.xda-developers.com/one-m9/help/upgrading-to-2-10-401-1-help-t3164395
jollywhitefoot said:
Read this thread. It will help you return to stock ago you can update using ota. But honestly, if you don't know what an ruu is, it's probably over your head.
http://forum.xda-developers.com/one-m9/help/upgrading-to-2-10-401-1-help-t3164395
Click to expand...
Click to collapse
yes i need the taiwan RUU but i dont find where to download it
danieldp1990 said:
yes i need the taiwan RUU but i dont find where to download it
Click to expand...
Click to collapse
Either you use a RUU or you use a TWRP Backup. Both can be found in my signature.
Flippy498 said:
Either you use a RUU or you use a TWRP Backup. Both can be found in my signature.
Click to expand...
Click to collapse
Where ? can you gide me? All I know is that I have to RUU a newer firmare. I cant downgrade. cause it will fail.
danieldp1990 said:
Where ? can you gide me? All I know is that I have to RUU a newer firmare. I cant downgrade. cause it will fail.
Click to expand...
Click to collapse
You may need to go RUU thats the best option really, or have a TWEP image backup, i recommend using facebook oe whatsapp for more details, here is mine +52-442-230-1496 but im available until 5pm CT.
LLegion said:
You may need to go RUU thats the best option really, or have a TWEP image backup, i recommend using facebook oe whatsapp for more details, here is mine +52-442-230-1496 but im available until 5pm CT.
Click to expand...
Click to collapse
Ok I added you to whatsapp, mine is +57 3166208154
danieldp1990 said:
Where ? can you gide me? All I know is that I have to RUU a newer firmare. I cant downgrade. cause it will fail.
Click to expand...
Click to collapse
I didn't said anything about a downgrade.
As I said, the link with the files is in my signature. (Alternatively click here.)
Flippy498 said:
I didn't said anything about a downgrade.
As I said, the link with the files is in my signature. (Alternatively click here.)
Click to expand...
Click to collapse
How do I install the zip? cuase there is only 1 .exe RUU and its a older version than the one I have. the rest are .zip
danieldp1990 said:
How do I install the zip? cuase there is only 1 .exe RUU and its a older version than the one I have. the rest are .zip
Click to expand...
Click to collapse
Rename the file to 0PJAIMG.zip, copy it to the root directory of a SD card which is not bigger than 32 gb and formated to fat32, put the card into your phone and boot to Download Mode. The rest will explained on the screen of your phone.
Flippy498 said:
Rename the file to 0PJAIMG.zip, copy it to the root directory of a SD card which is not bigger than 32 gb and formated to fat32, put the card into your phone and boot to Download Mode. The rest will explained on the screen of your phone.
Click to expand...
Click to collapse
No problems if i am S-ON and locked bootloader?
danieldp1990 said:
No problems if i am S-ON and locked bootloader?
Click to expand...
Click to collapse
Not as far as I know.
The firmwares are the same. Just wait for marshmallow. The last digit is how many attempts to push to device so at best it only has a stagefright patch so its not really worth the hassle.
I wish I stole my HTC M9.
shivadow said:
The firmwares are the same. Just wait for marshmallow. The last digit is how many attempts to push to device so at best it only has a stagefright patch so its not really worth the hassle.
I wish I stole my HTC M9.
Click to expand...
Click to collapse
You are aware of the fact that version 2.10.709.6 already exists and that the M9 installs OTAs incrementally, aren't you? That makes one update from 1.40.709.4 to 1.40.709.8, one from 1.40.709.8 to 2.10.709.1 and a third one from 2.10.709.1 to 2.10.709.6 which are currently not installed on that phone. So I would say it is worth the hassle to update that device. (Besides I would say it's not a real hassle at all. Restoring a TWRP backup or flashing a RUU aren't too difficult tasks. )

Categories

Resources