Develop Bugs

[REQUEST] SGH-T999V SBL Dumps

Hi there,
I'm working at creating a solution for JTAG repair on the SGS III T999V model and I'm in need of a SGH-T999V SBL dumps and a few other zones. I need a rooted user to simply perform the following command from a terminal on the phone, or while using ADB SHELL under the su user. Once at the command line issue this command, then simply upload the files which end up on your sdcard to me here. That's it!
Thanks in advance! If you are rooted, please step up and do the community a favor to make this solution possible...
NOTE: THE SGH-T999 HAS DIFFERENT LOADERS THAN THAT OF THE SGH-T999V. FOR THIS REASON, THE DONOR DEVICE OF THESE FILES MUST BE SGH-T999V.
Code:
dd if=/dev/block/mmcblk0p2 of=/sdcard/sbl1 bs=4096
dd if=/dev/block/mmcblk0p3 of=/sdcard/sbl2 bs=4096
dd if=/dev/block/mmcblk0p4 of=/sdcard/sbl3 bs=4096
dd if=/dev/block/mmcblk0p5 of=/sdcard/aboot bs=4096
dd if=/dev/block/mmcblk0p6 of=/sdcard/rpm bs=4096
dd if=/dev/block/mmcblk0p7 of=/sdcard/boot bs=4096
dd if=/dev/block/mmcblk0p8 of=/sdcard/tz bs=4096
dd if=/dev/block/mmcblk0p9 of=/sdcard/pad bs=4096
dd if=/dev/block/mmcblk0p10 of=/sdcard/param bs=4096
dd if=/dev/block/mmcblk0p18 of=/sdcard/recovery bs=4096

Bump. This is an easy operation for any rooted user. I can even make it easier with a batch script if needed. The community needs this for your T999V...

Super simple request guys. If you have a rooted T999V please post up after running the above commands. These dumps do not capture any personal data and there is ZERO risk at doing anything damaging to your device.

I can probably help you with this man! If I'm having problems, I'll PM you by tonight

This would be fantastic. As long as you have a T999V this would be exactly what is needed to ensure the T999V is repairable when hard bricked via JTAG...

I'm kinda confused mann, I'm entering all the CODES ? By downloading Terminal Emulator on my phone?

Yes terminal emulator would work fine. Then you can enter them one by one, they will be saved to your sdcard on the phone. Then just put them online so I can download them.

Any luck buddy? I can walk you through any questions you may have.

Bump!!
Come on guys! Don't worry, this is important.

Ok I think I got all the files for you guys here..
let me know if I missed anything.
http://www.mediafire.com/?o77cos8yuh6k0dd

Just so other's know, we produced the world's first T999V a little over a month ago so this thread has succeeded it's purpose. Flash away guys, your hard bricks are fully repairable now...

Hahaha ^ yup! We are in safe hands.

Thanks to you...

Need help with samsung galaxy s3 SCH-R530M

Hi there,
I'm working at creating a solution for JTAG repair on the SGS III USC model and I'm in need of a SCH-R530M SBL dumps and a few other zones. I need a rooted user to simply perform the following command from a terminal on the phone, or while using ADB SHELL under the su user. Once at the command line issue this command, then simply upload the files which end up on your sdcard to me here. That's it!
Thanks in advance!
Code:
dd if=/dev/block/mmcblk0p2 of=/sdcard/sbl1 bs=4096
dd if=/dev/block/mmcblk0p3 of=/sdcard/sbl2 bs=4096
dd if=/dev/block/mmcblk0p4 of=/sdcard/sbl3 bs=4096
dd if=/dev/block/mmcblk0p5 of=/sdcard/aboot bs=4096
dd if=/dev/block/mmcblk0p6 of=/sdcard/rpm bs=4096
dd if=/dev/block/mmcblk0p7 of=/sdcard/boot bs=4096
dd if=/dev/block/mmcblk0p8 of=/sdcard/tz bs=4096
dd if=/dev/block/mmcblk0p9 of=/sdcard/pad bs=4096
dd if=/dev/block/mmcblk0p10 of=/sdcard/param bs=4096
dd if=/dev/block/mmcblk0p18 of=/sdcard/recovery bs=4096

tomy1986.nt said:
Hi there,
I'm working at creating a solution for JTAG repair on the SGS III USC model and I'm in need of a SCH-R530M SBL dumps and a few other zones. I need a rooted user to simply perform the following command from a terminal on the phone, or while using ADB SHELL under the su user. Once at the command line issue this command, then simply upload the files which end up on your sdcard to me here. That's it!
Thanks in advance!
Code:
dd if=/dev/block/mmcblk0p2 of=/sdcard/sbl1 bs=4096
dd if=/dev/block/mmcblk0p3 of=/sdcard/sbl2 bs=4096
dd if=/dev/block/mmcblk0p4 of=/sdcard/sbl3 bs=4096
dd if=/dev/block/mmcblk0p5 of=/sdcard/aboot bs=4096
dd if=/dev/block/mmcblk0p6 of=/sdcard/rpm bs=4096
dd if=/dev/block/mmcblk0p7 of=/sdcard/boot bs=4096
dd if=/dev/block/mmcblk0p8 of=/sdcard/tz bs=4096
dd if=/dev/block/mmcblk0p9 of=/sdcard/pad bs=4096
dd if=/dev/block/mmcblk0p10 of=/sdcard/param bs=4096
dd if=/dev/block/mmcblk0p18 of=/sdcard/recovery bs=4096
Click to expand...
Click to collapse
Thats the d2metro
MetroPCS model I'm not sure if from a t999 will help. But It should.

I wouldnt use the T999 firmware on another model like this. And considering ive never seen anyone in this forum with that model you may have more luck with the Verizon forum.
SCH USUALLY, designates that it operates on verizons network. Though recently one was release that appears to use Sprints instead.
Sent from my SGH-T999 using xda premium

DocHoliday77 said:
I wouldnt use the T999 firmware on another model like this. And considering ive never seen anyone in this forum with that model you may have more luck with the Verizon forum.
SCH USUALLY, designates that it operates on verizons network. Though recently one was release that appears to use Sprints instead.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Thanks , i will try on verizon forums and sprints too.

Need Help with Samsung Galaxy S3 SCH-R530M

Hi there,
I'm working at creating a solution for JTAG repair on the SGS III USC model and I'm in need of a SCH-R530M SBL dumps and a few other zones. I need a rooted user to simply perform the following command from a terminal on the phone, or while using ADB SHELL under the su user. Once at the command line issue this command, then simply upload the files which end up on your sdcard to me here. That's it!
Thanks in advance!
Code:
dd if=/dev/block/mmcblk0p2 of=/sdcard/sbl1 bs=4096
dd if=/dev/block/mmcblk0p3 of=/sdcard/sbl2 bs=4096
dd if=/dev/block/mmcblk0p4 of=/sdcard/sbl3 bs=4096
dd if=/dev/block/mmcblk0p5 of=/sdcard/aboot bs=4096
dd if=/dev/block/mmcblk0p6 of=/sdcard/rpm bs=4096
dd if=/dev/block/mmcblk0p7 of=/sdcard/boot bs=4096
dd if=/dev/block/mmcblk0p8 of=/sdcard/tz bs=4096
dd if=/dev/block/mmcblk0p9 of=/sdcard/pad bs=4096
dd if=/dev/block/mmcblk0p10 of=/sdcard/param bs=4096
dd if=/dev/block/mmcblk0p18 of=/sdcard/recovery bs=4096

Anyone have Samsung Galaxy S3 SCH-R530M Help me.

Hi there,
I'm working at creating a solution for JTAG repair on the SGS III USC model and I'm in need of a SCH-R530M SBL dumps and a few other zones. I need a rooted user to simply perform the following command from a terminal on the phone, or while using ADB SHELL under the su user. Once at the command line issue this command, then simply upload the files which end up on your sdcard to me here. That's it!
Thanks in advance!
Code:
dd if=/dev/block/mmcblk0p2 of=/sdcard/sbl1 bs=4096
dd if=/dev/block/mmcblk0p3 of=/sdcard/sbl2 bs=4096
dd if=/dev/block/mmcblk0p4 of=/sdcard/sbl3 bs=4096
dd if=/dev/block/mmcblk0p5 of=/sdcard/aboot bs=4096
dd if=/dev/block/mmcblk0p6 of=/sdcard/rpm bs=4096
dd if=/dev/block/mmcblk0p7 of=/sdcard/boot bs=4096
dd if=/dev/block/mmcblk0p8 of=/sdcard/tz bs=4096
dd if=/dev/block/mmcblk0p9 of=/sdcard/pad bs=4096
dd if=/dev/block/mmcblk0p10 of=/sdcard/param bs=4096
dd if=/dev/block/mmcblk0p18 of=/sdcard/recovery bs=4096

[Q&A] [INFO]Partition List HTC ONE M8 / RAW DUMP SCRIPT

Q&A for [INFO]Partition List HTC ONE M8 / RAW DUMP SCRIPT
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [INFO]Partition List HTC ONE M8 / RAW DUMP SCRIPT. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Roundabout Method
I don't mean to be a grave digger, but this method worked for me, perhaps someone else may find it useful:
Problems:
I couldn't get access to the partitions through adb shell, it kept giving 'access denied' and adb was not asking SuperSu for root permissions.
Solution: [I disclaim everything for legal purposes]
After a number of things, I finally copied the following into Google Keep (you can use anything, notepad, whatever, mainly to transfer a script-like function). WARNING, you DO need an External SD CARD (Verify through Root Explorer that the /sdcard2/ is your EXTERNAL SD card. Make a folder on it called "World" [or whatever], it will save there, else change [use replace all in notepad?] it to work):
Code:
dd if=/dev/block/mmcblk0p1 of=/sdcard2/World/mmcblk0p1
dd if=/dev/block/mmcblk0p2 of=/sdcard2/World/mmcblk0p2
dd if=/dev/block/mmcblk0p3 of=/sdcard2/World/mmcblk0p3
dd if=/dev/block/mmcblk0p4 of=/sdcard2/World/mmcblk0p4
dd if=/dev/block/mmcblk0p5 of=/sdcard2/World/mmcblk0p5
dd if=/dev/block/mmcblk0p6 of=/sdcard2/World/mmcblk0p6
dd if=/dev/block/mmcblk0p7 of=/sdcard2/World/mmcblk0p7
dd if=/dev/block/mmcblk0p8 of=/sdcard2/World/mmcblk0p8
dd if=/dev/block/mmcblk0p9 of=/sdcard2/World/mmcblk0p9
dd if=/dev/block/mmcblk0p10 of=/sdcard2/World/mmcblk0p10
dd if=/dev/block/mmcblk0p11 of=/sdcard2/World/mmcblk0p11
dd if=/dev/block/mmcblk0p12 of=/sdcard2/World/mmcblk0p12
dd if=/dev/block/mmcblk0p13 of=/sdcard2/World/mmcblk0p13
dd if=/dev/block/mmcblk0p14 of=/sdcard2/World/mmcblk0p14
dd if=/dev/block/mmcblk0p15 of=/sdcard2/World/mmcblk0p15
dd if=/dev/block/mmcblk0p16 of=/sdcard2/World/mmcblk0p16
dd if=/dev/block/mmcblk0p17 of=/sdcard2/World/mmcblk0p17
dd if=/dev/block/mmcblk0p18 of=/sdcard2/World/mmcblk0p18
dd if=/dev/block/mmcblk0p19 of=/sdcard2/World/mmcblk0p19
dd if=/dev/block/mmcblk0p20 of=/sdcard2/World/mmcblk0p20
dd if=/dev/block/mmcblk0p21 of=/sdcard2/World/mmcblk0p21
dd if=/dev/block/mmcblk0p22 of=/sdcard2/World/mmcblk0p22
dd if=/dev/block/mmcblk0p23 of=/sdcard2/World/mmcblk0p23
dd if=/dev/block/mmcblk0p24 of=/sdcard2/World/mmcblk0p24
dd if=/dev/block/mmcblk0p25 of=/sdcard2/World/mmcblk0p25
dd if=/dev/block/mmcblk0p26 of=/sdcard2/World/mmcblk0p26
dd if=/dev/block/mmcblk0p27 of=/sdcard2/World/mmcblk0p27
dd if=/dev/block/mmcblk0p28 of=/sdcard2/World/mmcblk0p28
dd if=/dev/block/mmcblk0p29 of=/sdcard2/World/mmcblk0p29
dd if=/dev/block/mmcblk0p30 of=/sdcard2/World/mmcblk0p30
dd if=/dev/block/mmcblk0p31 of=/sdcard2/World/mmcblk0p31
dd if=/dev/block/mmcblk0p32 of=/sdcard2/World/mmcblk0p32
dd if=/dev/block/mmcblk0p33 of=/sdcard2/World/mmcblk0p33
dd if=/dev/block/mmcblk0p34 of=/sdcard2/World/mmcblk0p34
dd if=/dev/block/mmcblk0p35 of=/sdcard2/World/mmcblk0p35
dd if=/dev/block/mmcblk0p36 of=/sdcard2/World/mmcblk0p36
dd if=/dev/block/mmcblk0p37 of=/sdcard2/World/mmcblk0p37
dd if=/dev/block/mmcblk0p38 of=/sdcard2/World/mmcblk0p38
dd if=/dev/block/mmcblk0p39 of=/sdcard2/World/mmcblk0p39
dd if=/dev/block/mmcblk0p40 of=/sdcard2/World/mmcblk0p40
dd if=/dev/block/mmcblk0p41 of=/sdcard2/World/mmcblk0p41
dd if=/dev/block/mmcblk0p42 of=/sdcard2/World/mmcblk0p42
dd if=/dev/block/mmcblk0p43 of=/sdcard2/World/mmcblk0p43
dd if=/dev/block/mmcblk0p44 of=/sdcard2/World/mmcblk0p44
dd if=/dev/block/mmcblk0p45 of=/sdcard2/World/mmcblk0p45
dd if=/dev/block/mmcblk0p46 of=/sdcard2/World/mmcblk0p46
(Copy with or add a final return character for the last line to run okay)
I installed Terminal Editor
I went into Terminal Editor, typed "SU" pressed enter, a window pops up from SuperSu, Grant TE superpowers!!
Now, copy the above 'script', paste into TE (It will start immediately)
Connect your phone to your computer, and copy the World folder from your external storage to your computer.
PS it takes about 3GB on near-stock, without User Data.
Mainly I wanted the radio files and such, but whatever now I have a whole backup

Yea you'll need an unsecured kernel for ADB with root and some other modifications. It will get only worse moving forward. On the M9, even more stuff is required to run ADB as root.
My script still works, you just need to work out how to grant root to ADB.
Unfortunately, that also means you will not have any means to run a full and true stock backup (clone) of your phone because you need to modify at least the kernel and the ROM (add SU) in order to have access.
On the M9, DD has even been disabled for most partitions even with S-OFF. There, you can not access quite a few partitions with dd write (read works), rendering such clone backups useless.