Develop Bugs

[Q] softbricked my phone! keeps sending me to recovery screen :(

Hello!
I have a SGH-T889V Samsung Galaxy Note 2. I've had it rooted and running custom ROMs for more than 6 months, and I've never had an issue until now. I've tried flashing CM, pacman, and omnirom. All of them worked just fine (loaded ROM onto external SD, booted into recovery mode, factory reset, flashed ROM, flashed gapps, reboot phone and everything was peachy). I use Rom manager.
Yesterday, I tried flashing an update to omnirom (the 11/17 update) the same way as before. I got an error message, telling me the update failed. So I tried to reboot my phone again, but it told me that I had lost root access, and asked me if I wanted to fix that. When I picked yes, it went back to the Samsung load screen, and then the recovery screen appeared again. When I tried to "reboot phone now", it just flashed the samsung logo and then back to the recovery screen.
I tried loading the stock rom back on the eternal sd. That didn't work. Basically, when I took the external sd card out and stuck it in my computer, it told me that I had to format it to use it. It gave me exfat and ntfs as the write options. I tried it both ways, but neither of them were registering when i stuck the external sd back onto my phone and tried to mount it, so I can't flash anything from my external sd. To get my phone to register the external sd, I have to format it through rom manager / recovery screen. That works, and after that, my phone registers the SD card, but obviously I still can't flash anything off the external sd once I've formatted it on the phone.
I tried using the toolkit posted in the android development section to load the stock rom. I tried sideloading and also pushing the file to the phone. Both times, I got a messaging saying that it was waiting for USB debugging to be enabled. As far as I know, I can't do that from the recovery mode of ROM manager. So no dice there.
Essentially, I've softbricked my phone. Whenever i boot it up, it goes straight to recovery mode (and I only hold down the power button, not the typical power + home key + volume up key to bring up recovery). I can't flash the stock rom back on the phone, since my external sd does not register after i format it on my computer. When I try to plug my phone into my pc to load stuff on there directly, I can see it registers as MGH, but it does not show up in Windows Explorer to allow me to put any files on there. When I select "reboot phone now" in recovery, it shows the Samsung logo screen briefly before going back to the recovery screen.
I'm really stuck Does anyone have suggestions on what I can do. please?

Have you tried ODIN to flash stock image back on device? Another thing u could try is use another microsd card and format it as FAT32, load your ROM on there via PC and then flash whatever.
Sent from my Nexus 5 using Tapatalk 4

funkstylez said:
Have you tried ODIN to flash stock image back on device? Another thing u could try is use another microsd card and format it as FAT32, load your ROM on there via PC and then flash whatever.
Sent from my Nexus 5 using Tapatalk 4
Click to expand...
Click to collapse
thanks! reading up on Odin now, I'll let you know what happens after I try that.

funkstylez said:
Have you tried ODIN to flash stock image back on device? Another thing u could try is use another microsd card and format it as FAT32, load your ROM on there via PC and then flash whatever.
Sent from my Nexus 5 using Tapatalk 4
Click to expand...
Click to collapse
So I have Odin up and running, I have the stock rom and it's been converted to a TAR file. However, I can't get Odin to work properly because it does not register that my phone is connected to my PC (presumably it should show up in one of the rectangles at the top of Odin once I plug my phone into my laptop via USB). Since my pc (and thus odin) does not detect my phone, I can't flash anything onto it
At this point, I have the appropriate stock roms, I have odin, and my phone still boots up to the recovery screen (with rom manager), but I can't manage to get it connected to my computer, though I have the Samsung drivers installed and working (up until i softbricked my phone).
ETA: google is my friend! Found clear instructions on using odin to flash the stock rom, and yes, it worked. Thanks!!

Google is everyone's friend and I'm glad you figured it out.
Sent from my GT-N7105 using Tapatalk 4

[Q] Bricked without USB debugging

So, basically, I've done a stupid thing, I attempted to install Cyanogen, forgetting to enable USB debugging, and it didn't go too well, all I can do now is use Clockwork Recovery as there is no ROM on the phone, I'm not sure if there's anyway I can enable USB debugging and flash it via USB, with Odin, but whenever I try to flash via .zip through Clockworkmod Recovery I either get the status 7 error, or if I take steps to get rid of that the installation just aborts, any ideas on what I can do?
There is also a possiblity I installed Clockwork Recovery for the 3G edition, whereas I have the LTE edition of the phone, I'm not sure if that'll have contributed to the downfall of my smartphone adventures
Any suggestions would be greatly appreciated!

Tobiscuits said:
So, basically, I've done a stupid thing, I attempted to install Cyanogen, forgetting to enable USB debugging, and it didn't go too well, all I can do now is use Clockwork Recovery as there is no ROM on the phone, I'm not sure if there's anyway I can enable USB debugging and flash it via USB, with Odin, but whenever I try to flash via .zip through Clockworkmod Recovery I either get the status 7 error, or if I take steps to get rid of that the installation just aborts, any ideas on what I can do?
There is also a possiblity I installed Clockwork Recovery for the 3G edition, whereas I have the LTE edition of the phone, I'm not sure if that'll have contributed to the downfall of my smartphone adventures
Any suggestions would be greatly appreciated!
Click to expand...
Click to collapse
hi,
first of all, dont worry for that. its not really a brick.
reboot your device to download mode (press vol-down, home and power buttons)
install philz_touch_5.18.2-i9195.tar.md5 - 7.08 MB via odin and restart to your phone to philz recovery. (press vol-up, home and power button, if you see samsung logo release power button)
then install cm rom and reboot. if you dont have any rom file in your storage, then copy rom zip file to your external sdcard via your pc and put external card again to your phone and reboot recovery and try install your rom from external card. this recovery is for lte variant of s4 mini.
i hope you get your phone working again and tell me if it works

I can't use Odin to detect my phone, it just doesn't show up :c

There is another solution.
first - get philz recovery zip file for lte variant and extract it. (get it here http://d-h.st/qdn) open updater-script and remove this code and save file.(that installer will not stop because your device is show him you have 3g variant but you have lte one so simply remove this code and save file to your zip)
assert(getprop("ro.product.device") == "serranolte"
|| getprop("ro.build.product") == "serranolte");
make zip file and copy it to your sdk folder and install it via adb sideload. (google it when you dont know how to install with sideload)
after this you should have right recovery.
then install your rom with sideload and reboot.

Yeah, that did fix it, I now however have the issue of my Wifi won't turn on and I cannot install things as it states that there isn't enough storage space available, which there is, there is also 4.62 Gb used in my Misc files and nothing is listed as even close to that size, so my phone isn't particularly better off ¬.¬ But thanks for your help

Got all of the problems sorted now, for the storage space thing, I had to remove my external SD card and just go on a formatting blitz after reinstalling Clockworkmod and the wifi required a modded kernel to be installed

Hi can someone help me, I have the same issue as Tobiscuits. The link no longer worked but I managed to get the file needed for recovery Odin doesn't see my phone so I can't recover to stock that way I'm guessing USB debugging is off I'm stuck on the Odin mode screen everytime my phone starts. I'm new to this what do I do with the recovery zip I have, it's on my pc atm

Stevoo19 said:
Hi can someone help me, I have the same issue as Tobiscuits. The link no longer worked but I managed to get the file needed for recovery Odin doesn't see my phone so I can't recover to stock that way I'm guessing USB debugging is off I'm stuck on the Odin mode screen everytime my phone starts. I'm new to this what do I do with the recovery zip I have, it's on my pc atm
Click to expand...
Click to collapse
Have you installed latest Samsung drivers? Or try reinstall/update them, from Samsung website?
(in the past some people had to uninstall the Samsung sync software & it's drivers first if it had already been installed on PC, ie smartswitch/kies)
You must reboot PC between each operation above & check Samsung drivers uninstalled in program list (assuming Windows). Reboot after install as well.
Update to TWRP after fixed.

IronRoo said:
Have you installed latest Samsung drivers? Or try reinstall/update them, from Samsung website?
(in the past some people had to uninstall the Samsung sync software & it's drivers first if it had already been installed on PC, ie smartswitch/kies)
You must reboot PC between each operation above & check Samsung drivers uninstalled in program list (assuming Windows). Reboot after install as well.
Update to TWRP after fixed.
Click to expand...
Click to collapse
Hi thanks for replying, yes I installed Samsung usb drivers still doesn't recognise my device, I do have the same phone again and that works but that phone doesn't recognise on Odin or pc either maybe it's a cable issue or USB driver issue like you said. I'm pretty new to all this but TWRP is the recovery zip right? When I try factory reset it goes through the motions then nothing happens goes back to Odin mode automatically.i should mention I uninstalled magisk before my phone decided to not boot back up I'm guessing I uninstalled it wrong. I'll try uninstalling the Samsung drivers and reinstalling.

[Q] MIUI Rom gone wrong

okay so heres what happened.
I have an international htc one x that is indeed rooted with no roms installed.
I did create a back up and then tried to install the MIUI rom (but I dont really know where that is on my phone. I know I made one with rom manager. I dont have any backups on my computer though)
It worked, however, it didnt have wifi or data signals so i went back to try again.
I opened my bootloader screen. For the record, it is unlocked and hboot is version 1.73 if that helps.
I wiped cashe/data/delvic everything and even factory reset and installed the MIUI RD rom now hoping it would have a difference.
The darn thing got stuck on the MIUI bootloader for hours.
I did the same thing again a few times, sometimes in different orders and then it passed on and another screen came saying 'starting apps'. That got stuck for hours too.
Now I don't have any other roms on my phone, just the MIUI RD. The original miui just vanished too, i dont see it anymore. Also, when I put my USB wire to the phone and connect it to the pc, I cant transfer newer files into it. So this is all I have access to on my phone apparently.
I tried flashing a boot.img and a couple kernels but no luck. I've been trying to do this for all day and this is my first time so I don't know much about it.
I've been googling and somethings say to open cmd and type but i keep getting 'fastboot is not recognized as an internal or external command'
Currently, its not stuck at either the MIUI screen or the Starting Apps. but just the HTC logo screen and not going past.
I don't really want to install any new roms considering i've worked really hard to get this to work and I really want it now more so.
How do i fix this? I want to use this rom.

flash philz recovery (http://forum.xda-developers.com/showthread.php?t=2240646), usb mounting should work on that, then:
steps to install ROM
1. bootloader version should be 1.3x
2. copy ROM to SD Card
3. copy boot.img INCLUDED in the ROM zip to fastboot folder
4. flash the boot.img in fastboot
5. in recovery, wipe system/data/cache/everything
6. flash rom
7. restart

but how exactly do i put it on my phone? my computer isnt detecting my phone when i connect it? im sorry im not exactly an expert on this.

Go to recovery - mounts and storage - hook up the usb cable - tap the last option in the mounts and storage list and wait a few minutes. It won't be mounted instantly

ok i flashed the philtz recovery but when i flash the boot.img it says:
Finding update package
Opening update package
Installing update
installation aborted
for reference: http://forum.xda-developers.com/showthread.php?t=1957490
thats the rom i used and i flashed the boot.img flasher thats right above the download link
edit: also i tried just flashing the rom again and im still stuck on the HTC screen.
its not even going to the miui screen or starting apps anymore. :[

Boot.img must be flashed via fastboot. Not via recovery !

ok, i looked up how to fastboot, downloaded sdk files and i moved the boot.img into the fastboot folder and i opened command prompt there and wrote fastboot flash boot boot.img but i keep getting:
'fastboot is not recognized as an internal or external command'
what did i miss?
EDIT: ok, so the fastboot folder i got from the page didnt work so i used a different fastboot folder, dragged the .boot there and now it worked! finally passed the screen and wifi is connecting!
thank you!

Good, thanks to @tomascus. He summed it up real nice
Cheers

Oneplus 3 do not boot after installing OxygenOS 4.0.2

Hello everyone!
My oneplus3 is actually running no OS and I'm having a boot loop.
I will try to explain what happened to me with the most details I can.
Before I ****ed everything up, I think I was running OxygenOS 3.28, not really sure about it but im 100% sure it was below 4.0, and it was rooted with TWRP 3.0.2 installed.
1) Today I had a pop up saying OxygenOS 4.0.2 was available (the official one that pops on the screen on boot) "Yay so coooool Nougat!"
1.1) I downloaded it, 1.4Go, then I pressed install
1.2) TWRP showed up, I didn't know what to do and that's where I ****ed up, I set my phone "factory new" in TWRP.
1.3) Phone restarted fresh new, I thought I had 4.0.2 but naaaaah would've been too easy so the official pop up showed again, I was still 3.28 I think.
1.4) Downloaded it once more, TWRP opened again, this time i was looking for the update i just downloaded in the "install" section. I browsed for quite a while and couldn't find it.
1.5) Master ****-up here: I tried to restore a backup. Then the bootloop happened. The black screen with "Oneplus" written in white. I was able to go back in TWRP by pressing power + volume down
1.6) Tried every kind of restore unsuccessfully, and tried ADB but it wouldn't load. Also TWRP said that I was running no OS when I wanted to turn off my phone for example.
2) I downloaded 4.0.2 from one plus website on my mac, and i flashed the official recovery instead of TWRP.
2.1) Transferred the update from my mac to my PC (seems important to me) and installed ADB & everything on both PC/O+3.
2.2) so adb worked in forceboot, i've been able to flash official recovery, tried once more to wipe & everything, but clearly I have no OS now, as TWRP said.
2.3) so i had the update in a folder (not a zip, probably due to the download being done from a mac), I made it a .ZIP with winrar, but "adb sideload update.zip" crashed at 0% everytime
2.4) looked at the archive then i noticed it was first a folder "OnePlus3Oxygen_16_OTA_039_all_1701140133_03b794d8a8b44883" then inside it i had the content like "boot.img" & everything. So i zipped it again but without that first folder because I thought it was the problem, but it kept on crashing 0%.
2.5) restarted my PC, looked on several forums, but i couldn't find any fix. Now adb can't even open update.zip anymore, it fails even before 0%.. I tried naming it .zip.zip, keeping the name "OnePlus3Oxygen_16_OTA_039_all_1701140133_03b794d8a8b44883.zip", using a third party app to allow more RAM to the cmd app...
I've been trying hard for 4 hours but I still have a O+3 without any OS... My last idea is downloading "OnePlus3Oxygen_16_OTA_039_all_1701140133_03b794d8a8b44883.zip" from my PC so it downloads it directly .zip unlike on my mac...
I hope I said everything, sorry for the long post but i'm desperate.. thanks for your attention,
Valentin

Try this guide: https://forum.xda-developers.com/oneplus-3/how-to/guide-flashing-oos-v4-0-1-custom-rom-t3537757
Let me know if it works.
EDIT: See FAQ #1, 2, 4, 12, 14 and 17.

dbabaev21 said:
Try this guide: https://forum.xda-developers.com/oneplus-3/how-to/guide-flashing-oos-v4-0-1-custom-rom-t3537757
Let me know if it works.
EDIT: See FAQ #1, 2, 4, 12, 14 and 17.
Click to expand...
Click to collapse
Thank you for answering! unfortunately i've already tried that and my problem occurs when i try to sideload the update from adb recovery... "couldn't load 'update.zip'"
I dont really know what to do now because I think my only option here is to load the OS through adb as I can't boot my phone to get the update zip inside a specified folder to load it from internal storage.

Try to install the new official TWRP version i think it is 3.0.3-0 through fastboot. Boot up TWRP, wipe every partiton and copy the update.zip onto the phone. You can copy it by connecting it normaly via USB(like you would do in OOS) and install the zip file afterwards.

Sleazy_ said:
Thank you for answering! unfortunately i've already tried that and my problem occurs when i try to sideload the update from adb recovery... "couldn't load 'update.zip'"
I dont really know what to do now because I think my only option here is to load the OS through adb as I can't boot my phone to get the update zip inside a specified folder to load it from internal storage.
Click to expand...
Click to collapse
install stock recovery and then try installing official OS. Or install modded twrp 3.0.2-1.28 and then try installing Freedom OS 2.3 via sideload or through internal storage.

Sleazy_ said:
Thank you for answering! unfortunately i've already tried that and my problem occurs when i try to sideload the update from adb recovery... "couldn't load 'update.zip'"
I dont really know what to do now because I think my only option here is to load the OS through adb as I can't boot my phone to get the update zip inside a specified folder to load it from internal storage.
Click to expand...
Click to collapse
Stop fiddling with the ROM. Download the ROM afresh directly to your Windows PC/laptop. Check the md5. Then start experimenting with the other suggestions but don't again meddle with the ROM!

Sleazy_ said:
Thank you for answering! unfortunately i've already tried that and my problem occurs when i try to sideload the update from adb recovery... "couldn't load 'update.zip'"
I dont really know what to do now because I think my only option here is to load the OS through adb as I can't boot my phone to get the update zip inside a specified folder to load it from internal storage.
Click to expand...
Click to collapse
I read your post again and here are a few things:
* Don't update Stock OOS via "System updates" in Settings if you are rooted and have TWRP
* Back up your data before updating, wiping or doing something with your phone.
* For the ADB error, see the FAQ #17 in the guide I provided.
Now, try this:
Flash TWRP via fastboot > boot to TWRP > connect your phone to your PC and copy the full Stock OOS v4.0.2 OTA to your phone > reboot to fastboot and flash Stock Recovery.
It didn't touch the internal storage. So, try to install from internal storage when you are in Stock Recovery.
Let me know if it worked.

device keeps rebooting to twrp

Guys,
My father got my op5t with root, I think he had oreo oxygen os rom, after a couple months, he entered twrp by accident and he whiped, he did not know what he was doing. Long story short, the device keeps rebooting to twrp bluespark 3.2.1 v8.78. When the device is in twrp, i tried to connect to the pc but it wont detect the device.
My question; how can I fix this, I downloaded (OnePlus5TOxygen_43_OTA_034_all_1804201221_5c1b6d44ac9) but I dont know how to put in the device in order to install the zip file through twrp to restore Oxygen Os.

Hold the power+volume down buttons together and don't let go until you reach the twrp load up menu.
Stick the zip file into a storage format that hooks up to the USB-C, go into twrp and switch from internal storage to USB OTG and flash it from there.
I'm not too sure about this next method but you may be able to hook your phone up to the computer and have it on TWRP, you might have to look for the setting in the menus, then find the phone from your PC and drag the file onto the phone. I assume you know the steps in how to flash a new ROM.
Just a reminder, you'll have to be on , 5.1.7 Oreo to make the jump to 9.0 pie oxygen OS. Do you know what version he was on? You might have to just go into download mode and use ADB to flash the file.

kaslopis said:
Hold the power+volume down buttons together and don't let go until you reach the twrp load up menu.
Stick the zip file into a storage format that hooks up to the USB-C, go into twrp and switch from internal storage to USB OTG and flash it from there.
I'm not too sure about this next method but you may be able to hook your phone up to the computer and have it on TWRP, you might have to look for the setting in the menus, then find the phone from your PC and drag the file onto the phone. I assume you know the steps in how to flash a new ROM.
Just a reminder, you'll have to be on , 5.1.7 Oreo to make the jump to 9.0 pie oxygen OS. Do you know what version he was on? You might have to just go into download mode and use ADB to flash the file.
Click to expand...
Click to collapse
thnx for response, but I said from the start that I believe that he was running oreo, im sure he was not on pie, it could be oreo or nougat but I think oreo. USB otg does not work for me, otherwise I would have tried that, I dont have the equipment.
The other method you mentioned about adb, If I go to twrp, click on advaned then you can click adb sideload, from there you should swipe to start sideload I believe, then open cmd in winodws and type ''adb sideload'' then drag the zip file to cmd and hit enter, however it says; cannot read 'E:\op5t restore stock\OnePlus5TOxygen_43_OTA_034_all_1804201221_5c1b6d44ac9.zip
How should I proceed ?

hold on, I found an option to enable mtp in twrp, now the pc finds the device, let me put the stock rom 5..1.1 that I downloaded and report back how it goes.

after flashing te the stock zip file, the devicr was in bootloop, then I figured I had to uninstal Magisk with the magisk uninstal zip file, after that the device booted fine.
thnx for the help anyways, really appreciated it ^^