Closed per OP request
Warning :-
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, dead cats,
* thermonuclear war, or you getting fired because the alarm app failed.
* YOU are choosing to make these modifications, and no point
* in pointing the finger at me for messing up your device
*/
FEATURES
Compiled with UBERTC-6.0.x
Added CPU Governers
Wheatley
Alucard
PegasusQ
Renice
SmartassV2
Added I/O Schedulers
Zen
More To Come
WiFi Power management control
ThunderQuake Engine
Selinux set to permissive
Dynamic Touch Boost
Force Fast Charge
MTK Led Controller
USB Fast Charge
MTK RGB Controller
Note: To Control ThunderQuake & Wlan Power Mode Use ThunderZap From Playstore
Which Kernel To Download?
DevilPhoenix: This Kernel Works On All Marshmallow Based Rom And Marshmallow Based Nougat Rom (All Roms With @Rohan Taneja 's Tree)
DevilJarvis: This Kernel Works On All Roms Ported From Jiayu S3
DevilCoral: This Kernel Is Still WiP And May Not Work Any Most Of This Roms. It Can Be Used For Testing Propose
Links
Phoenix
Phoenix: Comes In 4 Varients The Normal Version As All The Features, The Dt2w Vairent Has Disabled DT2W/Pocket Mode, The Stock Varient Has All Custom Feartures Disabled, The Vibe Varient Is Desgined For Vibe Based Roms
Folder Link Here
Jarvis
Jarvis: Comes In 3 Varients The Normal Version As All The Features, The Dt2w Vairent Has Disabled DT2W/Pocket Mode, The Stock Varient Has All Custom Feartures Disabled
Folder Link Here
Coral
Coral: Comes In 3 Varients The Normal Version As All The Features, The Dt2w Vairent Has Disabled DT2W/Pocket Mode, The Stock Varient Has All Custom Feartures Disabled
Folder Link Here
Note: I have tested all the variants and they are working fine if u get bootloop or logo stuck
replace kernel by unpacking and repacking method
XDA:DevDB Information
DevilProject:- Kernels, Roms, And Lot More , Kernel for the Lenovo A7000
Contributors
Aryan Kedare, Rohan Taneja, sandeep.sethi, Xakep1993, GSandeep
Source Code: https://github.com/AryanKedare/
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 20171111
Stable Release Date: 2017-11-11
Current Beta Version: 20161206
Beta Release Date: 2016-12-06
Created 2017-01-02
Last Updated 2017-12-23
Change-Logs
Changelogs
Changelog Links https://github.com/AryanKedare/Kernels/tree/master/Changelogs
Build 20171223
- Reverted Wake Gestures (Phoenix & Coral Varient)
- Jarvis Varient Up steamed to 108
- Introducing Vibe Varient For Vibe Specific Builds
Build 20171105
-Final Upstream To 3.10.108
Build 20171017
-Fixed Zen I/O Scheduler Bumping (Ultimate Kernel @GSandeep)
-Added I/O Schedulers (Ultimate Kernel @GSandeep)
1. BFQ I/O scheduler
2. IOPS based I/O scheduler
3. IOSCHED_SIO
4. IOSCHED_TRIPNDROID
5. IOSCHED_VR
-Enabled UID_CPUTIME (Ultimate Kernel @GSandeep)
KernelUidCpuTimeReader exception
logcat error info in some ROMs
This patch add the configure to support /proc/uid_cputime/show_uid_stat.
-Fixed WiFI Power Mode (Ultimate Kernel @GSandeep)
-Fixed Blueborne Vulnerability (Venom Kernel @tanish2k09)
Build 20171011
-Added Wake Gestures (Ultimate Kernel @GSandeep)
-Added Haptic Feedback (Ultimate Kernel @GSandeep)
-Rpnetfilters (Danielhk)
-Cleaned And Updated GT9XX_aio Driver (DD-S & Danielhk)
-Removed Unused gesture
-Merged Latest Updates From MTK and google (Merged From DD-S @Rohan Taneja)
Build 20170831
-Fixed Auto Connect (Merged From Renice @sandeep.sethi)
-Merged New AnyKernel2 Updates With Youtube Lag Fix (Merged From Daredevil @Rohan Taneja)
-Added Advance TCP (Merged From Ultimate Kernel Gsandeep)
-Fixed Fix memory leak in USB mass storage function (Merged From Ultimate Kernel)
-Disabled CRC By default And Added Software Toggle (Merged From Renice @sandeep.sethi)
-Added Power Toggle (Merged From Renice @sandeep.sethi)
Build 20170815
Added New Governors (Merged From Heatware (Kishpatel))
Selinux Set To Permissive (Merged from Renice @sandeep.sethi))
Added WIfi Power Management (Merged From Heatwave)
Build 20170714
-Fixed Whole Source Code
-Used Original Lenovo Charging driver (You Need To Calibrate Your Battery After Flashing Kernel)
Build 20170701 (Major Update)
-Upstream To 107 (Thx To @Rohan Taneja )
-Rebased To Daredevil-s
-Added Force Quick Charge (Thx To @Rohan Taneja and @faux123) (Not Available in Jaiyu Based Kernel)
- Quick Charge upto 2500 mA support (thanks to faux123)
- Pocketmode with improvements for our proximity sensor
- Cleaned up some irrelevant and out-dated features
- Haptic feedback on DT2W and S2W.
How To Use Fast Charge
(To enable QC use command in Terminal Emulator :- echo '1' > /sys/kernel/charge_levels/quick_charge_enable )
(To enable for your prefered charging mode USB or A/C use the command :- echo '1300' > /sys/kernel/charge_levels/charge_level_usb - for usb, and echo '2000' > /sys/kernel/charge_levels/charge_level_ac - while on A/C supply)
Build 20170626
-Added Pocket Mode
Build 20170621
-Upstreamed To 3.10.106
Build 20170610
-Added Kcal And RGB Control (Merged From Renice Kernel @sandeep.sethi)
-Added Live Display (Merged From @divis1969 And @Rohan Taneja)
Build 20170605
- Added USB Fast Charge ( Merged From Renice @sandeep.sethi)
- Improved Ping ( Merged From Renice @sandeep.sethi)
Build 2
- Improved Topology ( Merged From Renice @sandeep.sethi)
- Upstreamed To 105 (Thx To @Rohan Taneja For Fixing Build Errors )
Initial Build
-New Governors
-Zen Isoscehed
-DT2W S2S S2W [S2S May Not Work In MM Roms]
-FIXED LED
-MODDED WIFI DRIVERS
-ThunderQuake Vibration Engine
-CPUFREQ_interactive is Bit Tuned
-Battery Capacity Updated To 3000mA
Enjoying The Kernel
If You Are Happy With The Kernel
You Can Donate Me
via
Paytm :-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Paypal:-
https://www.paypal.me/arykedare
Note:- Donations Are Not Necessary
When we are reflashing the ROM , should we wipe data and all ?
emil_515 said:
When we are reflashing the ROM , should we wipe data and all ?
Click to expand...
Click to collapse
This is a kernel and doesn't require wiping the ROM actually.
But if you're into that then yes you should wipe data.
Btw, @Aryan Kedare : Hyper-Ultra-awesome kernel, venom. Devil is ok.
tanish2k09 said:
Btw, @Aryan Kedare : Hyper-Ultra-awesome kernel.
Click to expand...
Click to collapse
May I know tanish what ROM you are using as of now? I wanna try this kernel as well
rainversion13 said:
May I know tanish what ROM you are using as of now? I wanna try this kernel as well
Click to expand...
Click to collapse
Aicp 11... My own build, not available to public. I haven't uploaded it.
Also, I tried it on RR mm by @aswinp222 and I don't have any complaints against this kernel.
Sent from my Lenovo A7000 using XDA Labs
Are you guys experiencing a drop in battery % from 30 to 15 ?
emil_515 said:
Are you guys experiencing a drop in battery % from 30 to 15 ?
Click to expand...
Click to collapse
Yes. Each and every time, whatever the kernel or ROM.
Excellent battery from 100% to 30%...
Then from 30% to 15% battery drain takes only 5 minutes.
could someone pls port it for stock s228? PM me if anyone is willing to help. thanks.
flashed it on stock ROM but LED doesnt work... it works only for charging. Any help would be appreciated
emil_515 said:
flashed it on stock ROM but LED doesnt work... it works only for charging. Any help would be appreciated
Click to expand...
Click to collapse
Use stock kernel on stock lol. It gives better backup and charging.
emil_515 said:
flashed it on stock ROM but LED doesnt work... it works only for charging. Any help would be appreciated
Click to expand...
Click to collapse
I think u have to see this thread
http://forum.xda-developers.com/len...making-green-led-to-notifications-t3479599/pa
Great work.:good:
Should I enable it or keep as it is?
So far so good.
Just flashed it (26.06.2017) seems very stable and the first thing I noticed is Improved WIFI. Further observations will be posted later. Thank you for your efforts.
New Kernel Build Up!
Read Changelog post #2
https://www.androidfilehost.com/?fid=745425885120748689
so... just flash this kernel like any other kernel? is it come with any instruction?
boanhdaytien2 said:
so... just flash this kernel like any other kernel? is it come with any instruction?
Click to expand...
Click to collapse
Yes, You Can Flash it like Any other kerenl.
NOTE: Take a backup of your boot before flashing the kernel, so that if anything goes wrong you can revert back the stuff to normal.
Guys New Build Up
Check Post #1 For Links
Check Post #2 For changelogs
Introducing Devil-Stock Variant For Those Who Dont Want Features
Devil-Stock Variant Kernel Has No Feature Totally Based On Stock Lenovo OSC
What is the kernel to be flashed on aosp extended official 7.1.2 of lenovo a7000
Which varient @Aryan Kedare
Related
Optimus Kernel
I present to you my own kernel which has been built with many optimizations and tweaks. This kernel will work on lollipop roms only.The main aim is to provide a stable kernel with optimizations.
I hope you all will like it
Enjoy!
Note: This kernel is for Moto G 2014 only(TITAN). Don't flash it on other devices
Custom Features:
- Updated to latest CM12.1 Sources
- Bumped to 3.4.109
- Compiled With Custom Uber 5.2 Toolchain
- Compiled With -O3 & Graphite Flags
- Compiled With Strict-Aliasing & Cortex A7 Tweaks
- ARM v7 Optimizations
- Replaced Qcom's hotplug binary with msm_mpdecision (aka bricked hotplug, better battery life + performance)
- GPU underclock/overclock(Min:100 MHz & Max:533 MHz)
- Add dev/frandom
- DoubleTap2Wake & Sweep2Wake
- Added Support for Kernel Neon Mode
- Enabled Pipe Flag
- IntelliThermal V2 by Faux
- Adreno Idler Algorithm
- State Notifier Driver by Neobuddy89
- Add BioShock/DanceDance Govs
- Added SmartMax/LionHeart Govs
- LCD Kcal Control by Savoca
- Faux's Sound Control
- Optimized ARM RWSEM Algorithm
- Optimized Square Root Algorithm
- CpuFreq and CpuBoost Optimizations
- Disabled Gentle Fair Sleepers
- Enabled Many TCP Congestions
- Added SIO,VR & ZEN IO Scheduler
- Sched & Mutex Tweaks
- Pushed Read Ahead value to 512
- Use your android device as USB Keyboard/Mouse
- Enabled FSync by default
- Optimized Slub
- VFP HardFloat
- Power Efficient WorkQueues
- Reclaimed RAM from loggers
- Kexec patched (Multirom Compatible)
- Many more things (Check Github)
Disclaimer:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this KERNEL
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
You need ROM's default kernel before flashing this. Make sure you have it otherwise clean flash the kernel with the rom to avoid any issues.Pls reboot after tweaking the kernel.
How to Flash:
1. Download the kernel and place it into your phone storage
2. Reboot into recovery
3. Install the kernel
4. (optional) Wipe Dalvik/ART Cache and Cache partitions
5. Reboot and enjoy!
DOWNLOADS:
AndroidFileHost
PLS DON'T MIRROR THE LINKS
Recommended app:
Kernel Adiutor or Synapse
Flash UKM.zip from the below link: (credits to @apb_axel)
http://forum.xda-developers.com/android/software/zip-synapse-script-universal-kernel-t2736986
And then install synapse from play store
Credits : (In no specific order,pls pm me if i missed someone)
faux123
Cl3Kener
savoca
Anas Karbila
pinkflozd
YoshiShaPow
DC07
luca020400
And more
XDA:DevDB Information
Optimus Kernel, Kernel for the Moto G 2014
Contributors
Flashhhh
Source Code: https://github.com/desaishivam26/Optimus_Reborn
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: R1
Beta Release Date: 2015-04-24
Created 2015-04-24
Last Updated 2015-09-30
Mine!
One More!!
Good to see this awesome kernel on our Titan!!
Anas Karbila said:
Good to see this awesome kernel on our Titan!!
Click to expand...
Click to collapse
Oh lol Thanks!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It just booted fine. Going to do some fine tuning with kernel Adiutor now!
Sent from my XT1068 using Tapatalk.
Brilliant! Gonna flash it right away!!!
Can this be used on Stock based roms ?
No install hiccups, running smoothly.
BTW, which governor gives a better battery life, not compromising on the performance extensively, but little above balanced?
Thanks
observingi said:
No install hiccups, running smoothly.
BTW, which governor gives a better battery life, not compromising on the performance extensively, but little above balanced?
Thanks
Click to expand...
Click to collapse
Impulse or yankactive
zakee94 said:
Can this be used on Stock based roms ?
Click to expand...
Click to collapse
NO
Will it work on Stock based 5.0.2? More specific TP? Thanks
ptambo91 said:
Will it work on Stock based 5.0.2? More specific TP? Thanks
Click to expand...
Click to collapse
seriously where you too lazy to read 1 post above yours -_-
If this kernel won't work on Stock based ROMs it would be good to mention it in OP... @Flashhhh @Shawn5162
ptambo91 said:
Will it work on Stock based 5.0.2? More specific TP? Thanks
Click to expand...
Click to collapse
No it won't work. It's for CM12 and AOSP roms only
zakee94 said:
If this kernel won't work on Stock based ROMs it would be good to mention it in OP... @Flashhhh @Shawn5162
Click to expand...
Click to collapse
Already updated the OP.
I'm sorry ... ten minutes ago... I'm working and I didn't realize to refresh page. My bad.
observingi said:
No install hiccups, running smoothly.
BTW, which governor gives a better battery life, not compromising on the performance extensively, but little above balanced?
Thanks
Click to expand...
Click to collapse
I recommend smartmax governor for that
smitharro said:
View attachment 3279459
It just booted fine. Going to do some fine tuning with kernel Adiutor now!
Sent from my XT1068 using Tapatalk.
Click to expand...
Click to collapse
All set up now! I really was on the lookout for a kernel like this! Hope it is as stable as it promises to be.
Sent from my XT1068 using Tapatalk.
im testing this right now with reccommended settings, post my benchmark scores later
scores 18608
If you guys have other settings to reach the full potential of the hardware with great battery life please post :angel:
Works Fine and fast....
CPU underclocking is THE BEST
I have a doubt : Under the Hotplug[CPU] Should the MPDecision be Enabled for the kernel addon MSM MPDecision Hotplug to work? ALSO should i Disable faux's Intelliplug?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(c) Marvel Inc.
Code:
#include
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*/
The kernel is based over official source code released by Lenovo OpenSource Team.
Basic Features:
Insecured
init.d support
huge upstream to 3.10.105
arm64: compiler optimizations
compiler-gcc: 4.9 google prebuilts
alot more.... and more to added along
Downloads:
-AndroidFileHost-
Installation:
(must be on Android MM 6.0/N 7.0-7.1.1 update)
Reboot into TWRP
Flash Daredevil-vX.X-2017XXXX-XXXX-aio_row.zip
Reboot!
XDA:DevDB Information
Daredevil Kernel for Lenovo A7000-a, Kernel for all devices (see above for details)
Contributors
Rohan Taneja, daniel_hk, Google, Team MAD
Source Code: https://github.com/rohantaneja/
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: S and X
Stable Release Date: 2017-07-02
Created 2016-04-16
Last Updated 2017-07-02
Changelogs
Version S:
Code:
* Based on Lenovo A7000-a OpenSource code
* Upstream to - [I]3.10.106[/I]
* Fix IOCTLs for proper Nougat support
* DT2W added through MTK Touchpad driver implementation
* Reverted Prevent Sleep Mode to stock
* All stock parameters implemented back (charging, sleep, wake, governors, etc)
* Touch Boost added to Kernel
Version X:
Code:
* Based on Jiayu S3/S3 Plus sources by Team MAD
* Upstream to kernel version - 3.10.106
* Additions by @Aryan Kedare - dt2w, s2w, zen, fiops, etc (from Devil-Kernel)
* Thanks to [URL="https://github.com/Xakep16"]Xakep16 @ GitHub[/URL] - for adapting sources to aio_row
* Codename [U]X for Xakep[/U]
Updated Version S and Version X available on post #121
Older builds:
Version 2.1 (Discontinued):
Code:
* Based on Lenovo K3 Note OSC
* Same kernel version from 2.0 - [I]3.10.105[/I]
* Added DoubleTap2Wake
* Added Sweep2Wake
* Prevent Sleep mode
* Reverted to original interactive gov. (for the mean-time)
* Removed CPU-OC and GPU-OC support (it lead to bootloop due to wrong config)
* Touch Boost added to Kernel
Build 2.0 (#91)
Code:
* Revamped Thermal Management - maintain high performance at less heat.
* SELinux update for Android N-support
* Upstream to Kernel Version: 3.10.105
* NEON and cortex-A53 optimizations included again
* F2FS file-system support (tested on userdata)
* FIOPs as default iosched
* Yes, it comes with both OC/non-O/C version :cowboy:[B][SIZE="2"][biggest request fulfilled][/SIZE][/B]
* CPU O/C including CPU frequency upto 1994 MHz (or 2.0 GHz)
* GPU O/C includes O/C upto ~ 820 MHz (automatic optimization while 3D application usage) [Might not show in Kernel Adiutor]
* Undervolt-support also included
(Thanks to [URL="https://forum.xda-developers.com/member.php?u=4948627"][COLOR="Green"]daniel_hk[/COLOR][/URL] for O/C commits)
* Upstream Patches are already provided on [URL="http://www.github.com/rohantaneja"]GitHub.com[/URL]
N-Beta
Code:
* Upstream to Kernel Version: 3.10.103
* merged Google's latest security patches (selinux upsteams)
* compiled with Compiler GCC-4.9 (google-prebuilt-tc)
* improved stability and performance
* added touch boost
* enabled Dynamic FSYNC
* added cortex-A53 and NEON optimization
* enabled KSM and UKSM
Build 1.2
Code:
* merged Google's latest security patches from tag - 'android-6.0.1_r0.75'
* compiled with UBERTC 5.3.1 20160401 (optimized-tc)
* special wake controls: sweep2wake and doubletap2wake added to kernel
* wake control: wake using menu key (just a tap or swipe)
* improved stability and performance
* added touch boost
* reduced wake delay from 1000 ms to 150 ms
* added new governors: smartmax (unstable at the moment), alucard, interactive (optimized), intelliactive (highly-customized for aio_row)
* new default governor: intelliactive
* enabled Dynamic FSYNC
* added cortex-A53 and NEON optimization
* added pocket mod (spl. thanks to @BlueFlame4 - without his open-source development for Elephone P8000 it wouldn't be easy)
* enabled KSM and UKSM
* added i/o schedulers: FIOPS & BFQ
* [STRIKE]added Undervolt/Overvolt support[/STRIKE] (EDIT: reverted to default due to unstable device behaviour)
Build 1.1
Code:
* added compiler optimization
* reduced read head size
* huge upstream to 3.10.101
* added optimization default governor
Build 1.0
Code:
* initial build
Unsupported device.Aborting…
Updater process ended with ERROR: 1
Error installing zip file ………………………………………
Use proper recovery
Chirag21 said:
Unsupported device.Aborting…
Updater process ended with ERROR: 1
Error installing zip file ………………………………………
Click to expand...
Click to collapse
Use my compiled TWRP 3.0.2-1 : here
plzz help for building zimage
I successfully build kernel from your sorce but after compiling I found the files in /arm/arm64/boot/ image image.gz image.gz-dtb I can't build or find zimage plzzz help me guide me how to build plz ...
sanjaykamti6 said:
I successfully build kernel from your sorce but after compiling I found the files in /arm/arm64/boot/ image image.gz image.gz-dtb I can't build or find zimage plzzz help me guide me how to build plz ...
Click to expand...
Click to collapse
A little tutorial for the same.
Use the AnyKernel2-Template.zip I have ported to MTK.
Rename image.gz-dtb -> zImage
Add zImage to AnyKernel2-Template.zip
Flash using TWRP 3.0.2-1
Rohan Taneja said:
Use my compiled TWRP 3.0.2-1 : here
Click to expand...
Click to collapse
Flashed today.Device is little faster now but charging is slow.So far so good.
Chirag21 said:
Flashed today.Device is little faster now but charging is slow.So far so good.
Click to expand...
Click to collapse
Maybe charge rate tweaks might have effected that. I'll remove it in next build.
Btw thanks for the review
Rohan Taneja said:
Maybe charge rate tweaks might have effected that. I'll remove it in next build.
Btw thanks for the review
Click to expand...
Click to collapse
Waiting for next build
delete
delete
So the kernel is awesome,maybe what is missing is synapse support(with maybe oc and uv for cpu and gpu,cause only max andmin frequencies are allowed,plus double tap to wake cause sweep to wake doesnt work for me) it seems many devs use it as default,also when trying to flash using twrp 3.0.2-2 it says error,can you fix?
Alucard said:
So the kernel is awesome,maybe what is missing is synapse support(with maybe oc and uv for cpu and gpu,cause only max andmin frequencies are allowed,plus double tap to wake cause sweep to wake doesnt work for me) it seems many devs use it as default,also when trying to flash using twrp 3.0.2-2 it says error,can you fix?
Click to expand...
Click to collapse
I assure a new build in coming week.
And I will also try to build another TWRP build to check the problem. :fingers-crossed:
Rohan Taneja said:
I assure a new build in coming week.
And I will also try to build another TWRP build to check the problem. :fingers-crossed:
Click to expand...
Click to collapse
Thats good news,i have to say that in stock rom with daredevil kernel or not doze mode doesnt seem to work,during night it drains about 10 percent,ive tried with or without your kernel so lenovo didnt do a good job with their rom.
https://lenovoa7000blog.wordpress.com/2016/05/04/twrpa70008gb-3-0-2-2-by-risma-ermaya/
Here is the latest recovery that pops up an error when trying to flash kernel but flashes supersu with no problem.
Alucard said:
https://lenovoa7000blog.wordpress.com/2016/05/04/twrpa70008gb-3-0-2-2-by-risma-ermaya/
Here is the latest recovery that pops up an error when trying to flash kernel but flashes supersu with no problem.
Click to expand...
Click to collapse
The flashable zip checks device codename or product name from recovery.
If it mismatches it will result in error.
That's why I suggest 3.0.2-1 recovery at the moment. Also I have made 3.0.2-3 build ready.
Will be released along with Daredevil V1.2
Rohan Taneja said:
The flashable zip checks device codename or product name from recovery.
If it mismatches it will result in error.
That's why I suggest 3.0.2-1 recovery at the moment. Also I have made 3.0.2-3 build ready.
Will be released along with Daredevil V1.2
Click to expand...
Click to collapse
Great news!Yes i use your recovery at the moment and as soon as you release the new version i will flash and report back.
Cool! Can u suggest an app to control the behavior of the kernel? And could u provide the stock Marshmallow kernel just in case? Thanks
can i flash this recovery over stock rom mm 6.0????
flashed it on stock rom...........ver 1.1 that works on stock rom......ver 1.0 gave me brick........had to flash the entire stock rom again
Ceco85 said:
Cool! Can u suggest an app to control the behavior of the kernel? And could u provide the stock Marshmallow kernel just in case? Thanks
Click to expand...
Click to collapse
Kernel Adiutor will work fine
bladehunter said:
can i flash this recovery over stock rom mm 6.0????
flashed it on stock rom...........ver 1.1 that works on stock rom......ver 1.0 gave me brick........had to flash the entire stock rom again
Click to expand...
Click to collapse
1.1 works fine on stock MM
I am fixing flash script for further builds.
Sent from my Daredevil using XDA Labs
Hi guys, I have proposed to make a kernel for the falcon and here they have it <3
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Screenshot:
Click to expand...
Click to collapse
Old builds history:
http://pastebin.com/RqyTpYna
New Build Evolution Kernel-R10 , For Nougat and Marshmallow Roms
- Linux code updated to lastest LineageOS source: 3.4.113 :good:
- Based on a new clean source for greater stability
- Compiled with latest simple GCC 4.8 (great for this) :good:
- Some optimizations for kernel compression (lzma)
- Many optimization for memory usage and reduce Lag
- Added Customs TCP
- New AsCaRex custom TCP by TeamMex Added (nice)
- Lzma compression (very nice)
- No more useless mods
- Added and improved SIO, SIOPLUS, VR, ZEN v2 I/O schedulers and default BFQ, etc...
- Row I/O scheduler is recommended by me :good:
- Added toggles for wakelocks
- MSM Hotplug stable rules (Nice deep sleep Now)
- Powersuspend updated (Use in Hybrid mode)
- Kcal v2 support
-Dt2w added but does not work for the moment (disable)
- Selinux enabled in permissive mode by default
- WQ Power Efficient tweaks
- State notifier driver added
- Lcd notify driver Removed (NO MORE START SCREEN FREEZE)
- New Governors added: zzmoove, Xperience by @TeamMex , Bioshock, Lionheart and ElementalX (testing)
- Interactive and Ondemand governor updated for better efficiency
- Added Sound Control v3.6
- Fast Charge enable by default
- Fix memory leaks for better perfomance
- Many more optimizations for performance and battery saving (check source)
- New TCP congestion driver called AsCaRex by @TeamMex Added
AsCaRex employs end-to-end bandwidth measurements to set cwnd and ssthresh after packet loss. The probing phase is as the original Reno, have a modified control mechanism for use with large congestion windows. A table indicates how much to increase the congestion window when an ACK is received.
Click to expand...
Click to collapse
[/SIZE]
Important: Use the kernel adiutor application to tune this kernel
How to install:
-Paste the zip on internal memory
-Install zip with twrp recovery
-If you use SUPERSU or Magisk, after installing my kernel install again
-Reboot and Enjoy :good:
If you like my work, contribute for more updates please:
Download:
https://www.androidfilehost.com/?fid=889764386195904758
**No mirrors please**
Suggestions for balance perfomance/battery
-Use interactive gov with hispeedfreq on 787mhz and min freq 300mhz....
-For more conservative use Bioshock or Xperience governor and min freq 300mhz
-For most battery life use zzmoove gov and select profile #2 (Some lags)
-Cpu hotplug as default msm_hotplug
-Sheduler ROW
-In misc features select suspension mode on hybrid (default) and TCP select AsCaRex or westwood
Consider please
Hi friends, I appreciate your support testing my work, If you like my kernel, contribute please, actually I'm studying at the university, I do this in my free time, I would appreciate a little help if it is at your disposal, thank you very much!
Evolution Turbo Kernel Oreo Updated
-Kernel build with QUVNTNN 6.4 2018.01 Custom ToolChain
-Improved Cortex-A7 configs
-Improved XZ kernel compression
-def_config regenerate
-Updated cpufreq and gpu drivers configs for better performance
-MSM_HOTPLUG
-Spinlocks changes
-Significant lag in oreo reduced
-Simple Adreno GPU algorithm added
-New governors distribution: Default govs, XPerience, SmartMax and BioShock govs
-All TCP cong is activated (AsCaRex default)
-Many more changes for you..
Source: https://github.com/willizambrano/android_kernel_motorola_msm8226
Download: https://androidfilehost.com/?fid=746163614322268638
How to install:
-Paste the zip on internal memory
Backup of you stock boot.img
-Install zip with twrp recovery
-Reboot and Enjoy :good:
Thanks to:
-CodeAurora
-CyanogenMod team
[email protected] for Sound Control
[email protected]
[email protected] for Kcal Screen Control
[email protected] for cherry-picks
[email protected] for cherry-picks
[email protected] Arriaga
- @TeamMex
Click to expand...
Click to collapse
XDA DevDB Information
Evolution_Kernel, Kernel for the Moto G
Contributors:
@willizambrano01
Click to expand...
Click to collapse
Sources:
https://github.com/willizambrano/android_kernel_motorola_msm8226
Click to expand...
Click to collapse
XDA:DevDB Information
Evolution Kernel unified for Oreo-MM/Nougat roms, Kernel for the Moto G 2014
Contributors
willizambrano01, willizambrano01
Source Code: https://github.com/willizambrano/android_kernel_motorola_msm8226
Kernel Special Features:
Version Information
Status: Beta
Stable Release Date: 2018-06-03
Current Beta Version: TURBO
Created 2016-12-07
Last Updated 2018-10-23
Downloaded and testing. Thank you
Good work,but its just for CM ROMs? :/
DeluxeMark said:
Good work,but its just for CM ROMs? :/
Click to expand...
Click to collapse
7.1 roms baseds on cm14.1 or aosp 7.1
willizambrano01 said:
7.1 roms baseds on cm14.1 or aosp 7.1
Click to expand...
Click to collapse
Nice! So i'll test it
Edit: When i've flashed the kernel,my superSU is gone,its normal?
And when i reflash the superSU,my sim doesnt work :/
Keep up the good work! smooth butter with RR Rom!
DeluxeMark said:
Nice! So i'll test it
Edit: When i've flashed the kernel,my superSU is gone,its normal?
And when i reflash the superSU,my sim doesnt work :/
Click to expand...
Click to collapse
It have in build root permission.. Goto developer options and activate root access for apps&adb..
.
No need to flash supersu
captian_jb said:
It have in build root permission.. Goto developer options and activate root access for apps&adb..
.
No need to flash supersu
Click to expand...
Click to collapse
Actually im using tesla N rom and it isnt pre rooted
Is this for titan?
do you have any plans on supporting GPU/CPU underclock overclock and undervolt?
DeluxeMark said:
Actually im using tesla N rom and it isnt pre rooted
Click to expand...
Click to collapse
Goto developer options find root access menu.. See the attachment...
Its not there u need SuperSU..
Otherwise activate root access for apps&adb
anybody using RR 7.1.1 ? have laggy issues?
captian_jb said:
Goto developer options find root access menu.. See the attachment...
Its not there u need SuperSU..
Otherwise activate root access for apps&adb
Click to expand...
Click to collapse
This rom isnt prerooted man
Can some1 review the battery and OS performance after using this kernel ?
New build For CM13
-Evolution CM13 - R1 - New Happy Christmas Edition
-Linux 3.4.51
-Linaro 4.9 CortexA7 optimization
-Many optimization for memory usage and reduce Lag
-Added TCP modes like westwood
-Optimized when compiling: pipeFlags, -O3, Gzip
-Added fast charge v2
- Optimized BFQ planner
-Added toggles for wakelocks (activate them with kernel adiutor)
-Advanced Intellidemand and Intelliactive Governors
-Hotplug AutoSMP added
-Powersuspend added and optimized
-Fsync enabled by default
-DT2W/S2W features
-Added Kcal v2 support
-Many more optimizations for performance and battery saving
Click to expand...
Click to collapse
Download:
https://www.androidfilehost.com/?fid=673368273298918120
**No mirrors please**
Click to expand...
Click to collapse
***Very soon update for nougat***
Waiting update for nougat !
-Evolution_N-R3 is ready (need test it, My device is a falcon and works perfectly)
-Linux 3.4.100
-Linaro 4.9 CortexA7 optimization
-Many optimization for memory usage and reduce Lag
-Added TCP modes like westwood
-Optimized when compiling: pipeFlags, -O3, Lzma compression (very nice)
-Added fast charge v2 deleted (not work correctly)
- More BFQ optimizatios
-Added toggles for wakelocks
-Hotplug MSM (Very nice)
-Powersuspend v1.5 added and optimized
-Fsync enabled by default
-SoundControl 3.5 added
-Added Kcal v2 support
-DT2W/S2W features woohooo
-Selinux enabled in permissive mode
-Many more optimizations for performance and battery saving (check source)[/QUOTE]
Download:
https://www.androidfilehost.com/?fid=529152257862690587
?? downloading !! ??
Wonderful kernel. Zero lag anywhere even on snapchat. My titan feels like a 6p lol. Thanks
EXO_K said:
Wonderful kernel. Zero lag anywhere even on snapchat. My titan feels like a 6p lol. Thanks
Click to expand...
Click to collapse
Thanks for you feedback bro, enjoy??
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Hi,
It's just an ordinary kernel built by ordinary person
Nothing special with this kernel, not better than other kernels out there
FEATURES
- Upstream updates to latest stable linux-4.4 and latest CAF tag
- Built-in with some custom CPU Governors
- Adreno Idler
- Adrenoboost
- Enabling some I/O schedulers and tcp congestions
- Added KCAL Color Tuner
- Boeffla Wakelock Blocker
- F2FS support
- Backlight dimmer option
- etc
See, nothing special inside this kernel :silly:
- Old Changelog -
v1 :
- Initial release
v2 :
- Upstream updates to Linux 4.4.150
- Remove Mako Hotplug and back to stock
- Add chill governor
- Add state notifier
- Add USB Fast Charge (I hope it's not a placebo)
- Add headphone sound control
- A little optimization interactive cpu governor
v3 :
- Build with DragonTC-8.0 and Linaro-7.3.1
- Upstream updates to Linux 4.4.153
- Sync with new kernel source from ASUS S323
- Better deepsleep (I hope )
- Works with stock and pie
- DT2W only works on stock rom
- Note : sometimes you have to reboot once again to get everything normal
v4 :
- Upstream updates to Linux 4.4.154
- Enable Spectrum support
- Tweak and update on some cpu governors and i/o schedulers
- Disable cpufreq value strict and give userspace to set min / max cpu freq
- Add adrenoboost and tweak adreno idler
- Enable support to sdfat & f2fs (merged with latest f2fs source for linux 4.4.y)
- Some other optimizations
v5 :
- Upstream updates to Linux 4.4.155
- Merge tag LA.UM.6.2.r1-10900-sdm660.0
- Add simple low memory killer
- Add frandom from http://billauer.co.il/frandom.html
- Update f2fs driver
- Some other optimizations
v6
- Upstream updates Linux 4.4.157
- Enable DT2W support (similiar method to activate with other kernels)
- Some tuning on spectrum balance profile
- Some optimization
- Feel it yourselves
v7
- Upstream updates Linux 4.4.159 as usual
- Enable DT2W support (works normally in new ROMs that integrated with DT2W support) big thanks to @say99
- Add backlight dimmer
- Add support to DTS Eagle
- Fix GPU stuck at 430 MHz on previous build
- Some optimization and bugfixes
- Feel it yourselves
v8
- Rebased kernel into LA.UM.7.2.r1-05100-sdm660.0 based on android 9.0.0
- Slimming kernel with some features removed
- Some optimizations
v9
- Rebased kernel into KudProject's kernel tree
- Merged with latest Linux-4.4 and CAF tag
- Built with google clang 8.0.4
- Bugfixes and optimizations
v10
- Merged with latest Linux-4.4.165 and CAF tag
- Bugfixes and optimizations
v11
- Merged with latest Linux-4.4.167 and CAF tag
- Added options to user to adjust thermal temperature
- Implemented input boost
- Other bugfixes and optimizations
v12
- Merged with latest Linux-4.4.169 and latest CAF tag
- Remove input boost, use stock cpu boost
- Improve stability, battery backup, and balance performance
.........
Next Changelog HERE
.........
HOW TO INSTALL
- Download kernel file
- Go to custom recovery
- Flash the kernel, wipe cache & dalvik-cache, reboot
DON'T FORGET TO
- Backup your boot.img and files
- Wipe cache/dalvik-cache after flashing
CREDITS
- All around git world
DOWNLOAD
{Mod edit}
Telegram Group
Old Builds
Notes :
• darkonah : an HMP kernel with stock frequency table
• darkonahX : an EAS kernel with overclocked cpu frequency up to 2,2 GHz and 1,8 GHz
• darkonahZ : an EAS kernel with stock frequency table
XDA:DevDB Information
darkonah, Kernel for the Asus ZenFone Max Pro M1
Contributors
travarilo
Source Code: https://github.com/travarilo/kernel_asus_sdm660
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: betutu
Created 2018-08-15
Last Updated 2020-03-15
Changelog
29-Jan-2019
.
.
07-Feb-2019
.
.
17-Feb-2019
.
.
21-Feb-2019
.
.
26-Feb-2019
.
.
26-Mar-2019
.
.
04-Apr-2019
.
.
26-Apr-2019
.
.
10-May-2019
.
.
18-May-2019
.
.
23-May-2019
.
.
12-Jun-2019
.
.
26-Jun-2019
Plz join original asus official telegram group so people can join with you
Based on stock ?
sourav.r said:
Plz join original asus official telegram group so people can join with you
Click to expand...
Click to collapse
Ok
Aftab_khatri said:
Based on stock ?
Click to expand...
Click to collapse
Based on stock merged with linux-4.4 stable and some customizations..
Awesome bb also it improves sound qaulity. Does it effects on sound quality?
Changelog v2 :
- Upstream updates to Linux 4.4.150
- Remove Mako Hotplug and back to stock
- Add Chill cpu governor
- Add state notifier
- Add USB Fast Charge (I hope it's not a placebo)
- Add headphone sound control
- A little optimization interactive cpu governor
No under clock or overlock ? (Optionally)
GryTEcHoG said:
No under clock or overlock ? (Optionally)
Click to expand...
Click to collapse
Underclock has been there since first build..
Overclock no..
dts eagle support?
androidgeek79 said:
dts eagle support?
Click to expand...
Click to collapse
it should be
Your kernel is stable. Could you add overlock as optional build ? I feel sometimes device is lagging with multi task, so want to see if we boost by 200mhz on both clusters.
Thanks
---------- Post added at 05:39 AM ---------- Previous post was at 05:35 AM ----------
Also can you add Fingerprint boost like I have seen in other kernel ? Not sure if that works.
which governor should i select to save ? battery
kunal.solanki.965 said:
which governor should i select to save ? battery
Click to expand...
Click to collapse
Powersave is the best for saving battery but performance will decrease
Changelog v3 :
- Build with DragonTC-8.0 and Linaro-7.3.1
- Upstream updates to Linux 4.4.153
- Sync with new kernel source from ASUS S323
- Better deepsleep (I hope )
- Works with stock and pie
- DT2W only works on stock rom
- Note : sometimes you have to reboot once again to get everything normal
-- darkonah --
.
.
.
better deep sleep is awesome
Working butter smooth with AEX 5.8. Battery life is very good.
workking on stock rom?? i m on latest 323 build
cjcool_123 said:
workking on stock rom?? i m on latest 323 build
Click to expand...
Click to collapse
It worked for me..
travarilo said:
It worked for me..
Click to expand...
Click to collapse
Little core frequency stuck at 1536 in latest build same happening with rawwork kernel v 2.1 latest but fine with ko and pbh why?
Ps power button unlock is really fast:good:
Fox kernel project for redmi s2/y2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
*Disclaimer
* Your warranty is now void.
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
/
What is fox kernel ??
Fox kernel is a EAS "4.9" and caf "3.18" based kernel to get great battery life and performance , with also some personalization
we have also a Telegram gorup to support you if something gone wrong
Disclaimer
HTML:
This kernel is only for ARM64 custom roms , so , don't flash it on miui
plus , don't flash 4.9 version on 3.18 roms or viceversa
Download link
Download link of 4.9 kernel variant
Download link of 3.18 kernel variant
how to flash it ?
simply flash it on twrp
FEATURES for 3.18 variant
HTML:
- overclocked to 2,2ghz "Cpu" and 750mhz "Gpu"
- governors like lionfish , lionheart , smartmax , and more :D
- kcal , dts eagle , fast charge and backlight dimmer support
- always updated with latest caf code
- battery life and performance balaced
and more :D
FEATURES for 4.9 variant
HTML:
- overclocked to 2,2ghz "Cpu" and 750mhz "Gpu" + non overclocked version
- eas governors schedutil ; blu_schedutil ; pixutil ; pixel_smurfutil
- kcal , fast charge and backlight dimmer support
- always updated with latest linux kernel updated
- wireguard support
- proper support on f2fs
- battery life and performance balaced
and more :D
if you have any question , join on our Telegram gorup
i want to thanks mahajant99 , rama , m_vaisakh for make arm64 possible on redmi s2 and darkhzy_kh and Nazmi981 who helped me to do this kernel
XDA:DevDB Information
Fox kernel , Kernel for the Xiaomi Redmi S2
Contributors
Its_Vixano, mahajant99, m_vaisakh, rama982 , darkhzy_kh , Nazmi981
Source Code: https://github.com/Fox-kernel/Fox_kernel_ysl_4.9
Kernel Special Features: Fox kernel is a EAS based kernel to get great battery life and performance , with also some personalization
Version Information
Status: Stable
Current Stable Version: r1.0
Stable Release Date: 2020-03-18
Created 2020-03-22
Last Updated 2020-10-09
You mentioned that nazmi has helped you to make this kernel.So,it means he has abandoned his qwerty kernel and this kernel is the successor of previous one?Is it better than the Gaming mode kernel?Have you benchmarked them both?
adnan1091 said:
You mentioned that nazmi has helped you to make this kernel.So,it means he has abandoned his qwerty kernel and this kernel is the successor of previous one?Is it better than the Gaming mode kernel?Have you benchmarked them both?
Click to expand...
Click to collapse
Sadly yes , after someone kanged his repo by saying he is made by own work of the past
Btw yes this is the successor of qwerty kernel , and for gaming , it works very well
For benchmark , i did a v3 that will get 100k on atuntu with the same frequency "yet on testing"
It's really wierd that because of forking or participation in a project.Shame on that guy,somebody can take down an open source
project. But,I'm glad to see that you've been
interested in his project too.Without doubts, the
kernel of Nazmi was the best kernel for s2 until today.
v3 update
v3 is now up
changelog
HTML:
- Update prima drivers from LA.UM.8.6.r1-04000-89xx.0
- Compiled with GCC 9.3 (experimental)
- Fixed battery 2% drop (experimental)
- Reduced the ticker to 80hz
- Disable GPU wake up on touch event
- Added some lz4 thinks
- Added dts eagle mod support
- Added dynamic Fsync support
- Added Intelliactive and Smartmax_eps Governor
- Added IntelliThermal V3.1
- Added Anxiety I/O scheduler
- Dts bus improvement
- Msm thermal optimizations
- Reduced kernel size
adnan1091 said:
It's really wierd that because of forking or participation in a project.Shame on that guy,somebody can take down an open source
project. But,I'm glad to see that you've been
interested in his project too.Without doubts, the
kernel of Nazmi was the best kernel for s2 until today.
Click to expand...
Click to collapse
yeah , that guy also faked 4.9 kernel on ysl beta group "official one" and we kicked him .
then . after 1 day the release of qwerty turbo , he kanged some features from Nazmi repo by calling his own work from the past.
btw yeah , Nazmi one was the best
i will try my best to keep alive that project :good:
V3 is really balanced keep up the good work!!!
Its_Vixano said:
Sadly yes , after someone kanged his repo by saying he is made by own work of the past
Btw yes this is the successor of qwerty kernel , and for gaming , it works very well
For benchmark , i did a v3 that will get 10k on atuntu with the same frequency "yet on testing"
Click to expand...
Click to collapse
Is it faster than the 2.4ghz cpu and 905 mhz gpu kernel of nazmi??
¿Can wee see someday a 3Ghz overclock? I saw that the Mi A1 overclock reach to 3Ghz with the same processor (SD 625).
In antutu Mi A1 scores 17xxxx points, more than redmi note 7 and near to redmi note 8
Hi bro please make a new kernel with extreme clocks , which will help gamers like me
Its_Vixano said:
Sadly yes , after someone kanged his repo by saying he is made by own work of the past
Btw yes this is the successor of qwerty kernel , and for gaming , it works very well
For benchmark , i did a v3 that will get 100k on atuntu with the same frequency "yet on testing"
Click to expand...
Click to collapse
How i can download
4.9 is out now
4.9 kernel update
changelog:
HTML:
- Initial 4.9 version
- Improved battery and performance
- now with oc and non oc version
- Merged 4.9.225
- Update wireguard to v1.0.20200506
- Proper support to f2fs
- Mics optimization
- Introduce state notifier
- Optimized temps
- Introduce new eas governors "schedutil ; blu_schedutil ; pixutil ; pixel_smurfutil"
download link on op
enjoy
thx for this kernel
thx for this kernel
thanks bro... so far good :good:
New 4.9 update
Changelog :
HTML:
- Merged 4.9.226
- Ticker at 250hz
- Improved battery and performance
- CPU undervolt to 70mv
- Use -O3 optimization level
- Dts eagle support
- add NEON accelerated XOR implementation
download link on op
enjoy
very nice kernel! getting a much smoother gameplay with OC build, thank you so much! :fingers-crossed:
New 4.9 update
Changelog:
HTML:
- Rebased build
- Reduced zip size
- Built with arter GCC 9.3.0
- Merged 4.9.227
- Merged kernel.lnx.4.9.r11-rel from caf
- Improved DeepSleep
- Improved Idle Drain
- Improved Jitter
- Ticker at 80hz
- Revert undervolt for the moment
- Min Cpu freq at 1.0-1.6-1.9-2.0 gHz "for better efficiency
- More , check git lel
download link on op
enjoy
Its_Vixano said:
Changelog:
- Rebased build- Reduced zip size- Built with arter GCC 9.3.0- Merged 4.9.227- Merged kernel.lnx.4.9.r11-rel from caf- Improved DeepSleep- Improved Idle Drain- Improved Jitter- Ticker at 80hz- Revert undervolt for the moment- Min Cpu freq at 1.0-1.6-1.9-2.0 gHz "for better efficiency- More , check git lel
download link: MOD EDIT: Link Removed
enjoy
Click to expand...
Click to collapse
bro... the latest 227 version perhaps you could re checked, bcz it's give. me error notice in root side
busybox mountapplet missing/failed..
i also get same issues in 224 version...
thanks....
great work... :good:
¿64 bits?
New 4.9 build
Changelog :
HTML:
- Merged 4.9.228
- Import Xiaomi USB Changes "now don't spam me for slow charge kthx"
- Add cpufreq changes for ysl
- Fixed some Flashlight Issue
Download link : MOD EDIT: Link Removed
Enjoy