Related
Good morning,
I'm sure it's something I'm missing. I had my tablet unlocked and running fine with TWRP. I went to Omni then to Preview 2. All was well.
Last night I decided to try SuperSU 2.72. I factory reset my Pixel C by installing the latest firmware. I then used fastboot to flash TWRP. It goes into TWRP fine but now it will not boot system any longer. It goes directly into TWRP when I have it boot system. Is this an encryption problem. I've tried both TWRP versions and same behavior.
Any idea what I'm doing wrong?
Thanks!
if you have 3.0.2 i think there was a problem with early build causing this. there was a link posted for the new one that supposedly fixed it. or just use the 3.0.0 build.
Mike02z said:
Good morning,
I'm sure it's something I'm missing. I had my tablet unlocked and running fine with TWRP. I went to Omni then to Preview 2. All was well.
Last night I decided to try SuperSU 2.72. I factory reset my Pixel C by installing the latest firmware. I then used fastboot to flash TWRP. It goes into TWRP fine but now it will not boot system any longer. It goes directly into TWRP when I have it boot system. Is this an encryption problem. I've tried both TWRP versions and same behavior.
Any idea what I'm doing wrong?
Thanks!
Click to expand...
Click to collapse
It seems some people have problems installing the NYCHitman1 TWRP version.
Most of them complaining because of boot problems.
To fix it:
Pls use xceed TWRP 3.0.0-0 version: http://forum.xda-developers.com/pix...official-twrp-2-8-7-0-pixel-c-dragon-t3288243
Or use my repacked TWRP 3.0.2-0 version : TWRP_dragon_3.0.2.0.img
Pls install TWRP via fastboot and boot directly into TWRP.
Install stock kernel (boot.img) via "fastboot" or use the TWRP flashable version from here: Update.ZIP_Nexus_Ryu_MXC89F-kernel_dragon.zip
Install SuperSU.zip 2.72 directly afterwards in TWRP - no reboot in between.
Download: http://forum.xda-developers.com/pixel-c/development/twrp-flashable-monthly-update-zip-pixel-t3375591
Good luck !
followmsi said:
It seems some people have problems installing the NYCHitman1 TWRP version.
Most of them complaining because of boot problems.
To fix it:
Pls use xceed TWRP 3.0.0-0 version: http://forum.xda-developers.com/pix...official-twrp-2-8-7-0-pixel-c-dragon-t3288243
Or use my repacked TWRP 3.0.2-0 version : TWRP_dragon_3.0.2.0.img
Pls install TWRP via fastboot and boot directly into TWRP.
Install stock kernel (boot.img) via "fastboot" or use the TWRP flashable version from here: Update.ZIP_Nexus_Ryu_MXC89F-kernel_dragon.zip
Install SuperSU.zip 2.72 directly afterwards in TWRP - no reboot in between.
Download: http://forum.xda-developers.com/pixel-c/development/twrp-flashable-monthly-update-zip-pixel-t3375591
Good luck !
Click to expand...
Click to collapse
Thanks guys! I did go back to 3.0.0-0 and it now boots into system. I'll also try your repackaged version of 3.0.2-0. I'm on my work PC but I don't see a link to your version. Is my work PC just hiding it or can I find it somewhere else? Thanks again!
Mike02z said:
Thanks guys! I did go back to 3.0.0-0 and it now boots into system. I'll also try your repackaged version of 3.0.2-0. I'm on my work PC but I don't see a link to your version. Is my work PC just hiding it or can I find it somewhere else? Thanks again!
Click to expand...
Click to collapse
Here is the direct link for TWRP_dragon_3.0.2.0.img:
https://onedrive.live.com/?authkey=...&id=479EB75F5DD9DA59!131&cid=479EB75F5DD9DA59
Here is the complete folder: (TWRP flashable stock kernel)
https://onedrive.live.com/?authkey=!ABLdSOKIeXgg_XU&id=479EB75F5DD9DA59!117&cid=479EB75F5DD9DA59
Cheers
Well in case of "recovery bootloop" start your device in bootloader mode and type "fastboot reboot" in command shell. That works mostly. No need to flash another recovery.
redukt said:
Well in case of "recovery bootloop" start your device in bootloader mode and type "fastboot reboot" in command shell. That works mostly. No need to flash another recovery.
Click to expand...
Click to collapse
And connect everytime with PC to do a manual reboot via fastboot .. seems a little bit too much for a simple reboot. At least for me
A proper TWRP with proper vboot will boot always correctly, like the one from xceed.
Did you ever had to do a manual reboot on his version ?
Should be fixed at the root cause .. Hope you agree ?
Cheers
I think there´s a little missunderstanding
The fastboot command helps you to get out of "recovery bootloop". After this you can reboot your device how offen you want without issues.
And yes with all existing TWRP versions I had some reboot hickups and have solved it with the fastboot method...
redukt said:
I think there´s a little missunderstanding
The fastboot command helps you to get out of "recovery bootloop". After this you can reboot your device how offen you want without issues.
And yes with all existing TWRP versions I had some reboot hickups and have solved it with the fastboot method...
Click to expand...
Click to collapse
Interesting .. I did not have any reboot issues with xceed TWRP versions .. I had to use the fix fastboot option once, but this is another topic.
But thanks for your information ...
followmsi said:
It seems some people have problems installing the NYCHitman1 TWRP version.
Most of them complaining because of boot problems.
To fix it:
Pls use xceed TWRP 3.0.0-0 version: http://forum.xda-developers.com/pix...official-twrp-2-8-7-0-pixel-c-dragon-t3288243
Or use my repacked TWRP 3.0.2-0 version : TWRP_dragon_3.0.2.0.img
Pls install TWRP via fastboot and boot directly into TWRP.
Install stock kernel (boot.img) via "fastboot" or use the TWRP flashable version from here: Update.ZIP_Nexus_Ryu_MXC89F-kernel_dragon.zip
Install SuperSU.zip 2.72 directly afterwards in TWRP - no reboot in between.
Download: http://forum.xda-developers.com/pixel-c/development/twrp-flashable-monthly-update-zip-pixel-t3375591
Good luck !
Click to expand...
Click to collapse
Hi.. after installing TWRP my phone nokia 3 TA-1020 I only booted to system once, when I restarted it later it does not boot the system but boots to TWRP. what can I do so that it will be rebooting to system instead of TWRP your help will be highly appreciated, thanks in advance.
Annan Denis said:
Hi.. after installing TWRP my phone nokia 3 TA-1020 I only booted to system once, when I restarted it later it does not boot the system but boots to TWRP. what can I do so that it will be rebooting to system instead of TWRP your help will be highly appreciated, thanks in advance.
Click to expand...
Click to collapse
Wrong device thread .. anyway just restore "stock" ROM/recovery to make it working again.
Good luck !
I was on OOS community build 3.5.3 with modified twrp-3.0.2-19-oneplus3.
I wiped everything except internal storage after that I tried to flash official TWRP.
After installing official twrp via modified TWRP. Niether I can boot into my recovery nor able to install any recovery via fastboot.
it I use "fastboot flash recovery recovery.img"
after installing recovery with this command My bootloader get stuck then I have to again restart my bootloader.
please help
You're probably stil on 3.5.2 firmware which isnt compatible with official twrp. Try and get into fastboot and try flashing modified twrp again. Then reboot in recovery and flash 3.2.6 firmware (not the rom) from modified twrp. Then reboot and flash official twrp from recovery or in flashify app.
i had this problem the other day, fixed this by flashing the modified recovery from a post here turn it off the booted it up by holding vol down + power and somehow it worked i was able to go into twrp
innocentwoolf said:
I was on OOS community build 3.5.3 with modified twrp-3.0.2-19-oneplus3.
I wiped everything except internal storage after that I tried to flash official TWRP.
After installing official twrp via modified TWRP. Niether I can boot into my recovery nor able to install any recovery via fastboot.
it I use "fastboot flash recovery recovery.img"
after installing recovery with this command My bootloader get stuck then I have to again restart my bootloader.
please help
Click to expand...
Click to collapse
I have same issue it is called half-brick go to full brick post here (http://forum.xda-developers.com/oneplus-3/how-to/guide-mega-unbrick-guide-hard-bricked-t3405700)
read whole post and prefer method 2 it will work like charm and i got when i am installing freedom os CE version and if it work then thank me
are you stuck with a black screen when booting to recovery if yea then wits the same situation i was in.
http://forum.xda-developers.com/showpost.php?p=68691560&postcount=56 that recovery helped me
Seagorilla2 said:
You're probably stil on 3.5.2 firmware which isnt compatible with official twrp. Try and get into fastboot and try flashing modified twrp again. Then reboot in recovery and flash 3.2.6 firmware (not the rom) from modified twrp. Then reboot and flash official twrp from recovery or in flashify app.
Click to expand...
Click to collapse
yes.. tried that only and it worked...
thanks
danxtian said:
are you stuck with a black screen when booting to recovery if yea then wits the same situation i was in.
http://forum.xda-developers.com/showpost.php?p=68691560&postcount=56 that recovery helped me
Click to expand...
Click to collapse
that helped me to thanks
Hi, yestarday I flashed CM 14 with TWRP to try it, and today I have tried to return to stock rom & recovery but I can't do it. At the beginning I have tried to flash stock recovery that I have downloaded from op.net with fastboot and I couldn't do it and after I have tried to do the same process but this time flash it with TWRP and also this time I couldn't able to fix it. In fine I have installed the stock ROM via TWRP and I managed to install it but now the problem is that I still can not install the stock recovery and accordingly I can't install op3 update.
An another problem is that I have tried to re-lock OEM from fastboot and when I try to turn on the phone, is asks me a pin to enable it and I don't know that pin because I haven't set no one
ICosmin said:
Hi, yestarday I flashed CM 14 with TWRP to try it, and today I have tried to return to stock rom & recovery but I can't do it. At the beginning I have tried to flash stock recovery that I have downloaded from op.net with fastboot and I couldn't do it and after I have tried to do the same process but this time flash it with TWRP and also this time I couldn't able to fix it. In fine I have installed the stock ROM via TWRP and I managed to install it but now the problem is that I still can not install the stock recovery and accordingly I can't install op3 update.
An another problem is that I have tried to re-lock OEM from fastboot and when I try to turn on the phone, is asks me a pin to enable it and I don't know that pin because I haven't set no one
Click to expand...
Click to collapse
Need to download custom twrp http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
Then use flashify to flash recovery
cbendixe84 said:
Need to download custom twrp http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
Then use flashify to flash recovery
Click to expand...
Click to collapse
i have already flashed twrp 3.0.2.2 but now I would flash stock recovery but when I try to install it and turn into it op3 show me only op logo and after a few seconds the screen become black.
your phone is bricked I'm assuming. there is a thread for that. that should work for you!
sahed01 said:
your phone is bricked I'm assuming. there is a thread for that. that should work for you!
Click to expand...
Click to collapse
No it isn't. Because I managed to put stock ROM into it via adb with push command and after I have installed it from twrp that works. My only problem is that i can't flash stock recovery.
i have the same issue. Tried many times but i'm getting a black screen after one plus logo for both stck recovery and unmodified twrp. only moidified twrp is working. please let me know if u find a way to resolve this.
thanks in advance
varmasagiraju said:
i have the same issue. Tried many times but i'm getting a black screen after one plus logo for both stck recovery and unmodified twrp. only moidified twrp is working. please let me know if u find a way to resolve this.
thanks in advance
Click to expand...
Click to collapse
I downloaded the stock rom and inside it(stock rom.zip) i put the stock recovery after I reflashed the stock rom via adb from twrp and in fine I locked bootloader.
ICosmin said:
I downloaded the stock rom and inside it(stock rom.zip) i put the stock recovery after I reflashed the stock rom via adb from twrp and in fine I locked bootloader.
Click to expand...
Click to collapse
you can reboot in to stock recovery without any issues?? I think I should give it a try. And you are saying the bootloader is locked again ?
varmasagiraju said:
you can reboot in to stock recovery without any issues?? I think I should give it a try. And you are saying the bootloader is locked again ?
Click to expand...
Click to collapse
Yes, I manage to reboot into stock recovery and i relocked bootloader(you needn't relock bootloader if you do not want)
ICosmin said:
Yes, I manage to reboot into stock recovery and i relocked bootloader(you needn't relock bootloader if you do not want)
Click to expand...
Click to collapse
Great. Can I place the file in beta8 rom .zip file and flash it using adb ??
If this procedure doesn't you can download an older version of oxygen os and update it via ota. At the first attempt when you will try it will give you an error and at the second attempt It will download all the ROM again and it will reflash by itself
varmasagiraju said:
Great. Can I place the file in beta8 rom .zip file and flash it using adb ??
Click to expand...
Click to collapse
I suggest you to try at the beginning with the beta 7 because if that procedure not work for you, you can't downgrade to beta 7.
ICosmin said:
I suggest you to try at the beginning with the beta 7 because if that procedure not work for you, you can't downgrade to beta 7.
Click to expand...
Click to collapse
Thank you.
Will let you know if it worked.
I had that problem.
Solution as follows, worked everytime for me: (I have not tried this method with the newest beta 8)
1. Flash OOS 3.2.6 firmware in twrp.
2. Reboot to fastboot and flash official oxygen os recovery downloaded from the OnePlus website. (This is still the old version for some reason, thus why it won't work)
3. Side load community build with oxygen os recovery, this will flash the new firmware back and update the recovery to be community build compatible.
4. Before rebooting erase everything (factory restore)
5. Reboot to OOS, finish setting up.
6. Turn on advance reboot in developer settings.
7. Reboot to recovery via the reboot menu. First time boot into the recovery may take sometime, but it has always worked for me.
8. After everything looks good, go ahead and OEM lock in fastboot, recovery should work as usual this time and format your phone
OP did you find a solution to this?? Im on the same boat as you
So I was running stock 4.0.0 with twrp recovery just fine, and go to update via ota the 4.0.1. Now this failed, and so I decided I might as well clean install. After installation now, regardless of rom (even lineageos based) I cannot boot out of twrp. Every reboot leads back to twrp. I can access fastboot, but thats it. I've tried reflashing twrp also
Edit: This is ridiculous. Literally everything looks perfect but it refuses to boot. Tried every rom I can, even tried different recoveries and ****ing nothing. I can't find any rhyme or reason to this nonsense.
Shayded said:
So I was running stock 4.0.0 with twrp recovery just fine, and go to update via ota the 4.0.1. Now this failed, and so I decided I might as well clean install. After installation now, regardless of rom (even lineageos based) I cannot boot out of twrp. Every reboot leads back to twrp. I can access fastboot, but thats it. I've tried reflashing twrp also
Edit: This is ridiculous. Literally everything looks perfect but it refuses to boot. Tried every rom I can, even tried different recoveries and ****ing nothing. I can't find any rhyme or reason to this nonsense.
Click to expand...
Click to collapse
I'll tell you exactly the same as the last one...
First of all... YOU can NEVER try to install an official update having a custom recovery (like TWRP) installed in your device. Previously, you should have changed to stock recovery.
Having said that, you have to make the following....
1. If you have already the full room into internal memory, reboot into recovery. If not, copy the full rom to a pendrive an connect it by OTG.
2. Restart in recovery mode and click on wipe and then, advance wipe and select... davilk, cache, data and system partitions. then, slide the bar.
3. When it finish, go back to the main menu and click on install. Select the full rom from internal storage (or OTG) and install it.
4. When it finishs, you have two options from here...
4.1. First option. Try to install TWRP recovery before rebooting, because the rom will have installed stock recovery. After flashing twrp, theoretically you should get twrp installed but sometimes it fails. So, It is possible it is blocked when you try to reboot system and you can see a warming saying "there is not rom installed". Don't panic, turn off your phone from power bottom and restart the device. You will see the room installed but not the twrp. In this case, you will have to install TWRP from sideload and then, Supersu from recovery.
4.2. Second option. When the rom instalation has a finished, reboot system to check the rom is installed correctly. Then, restart again your device to fastboot mode and install recovery twrp from sideload. Finally, you can install Supersu from recovery.
This is all! Never settle!
Flash stock recovery? Does it boot?
I have the exact same problem and in stuck in a pickle
---------- Post added at 08:15 AM ---------- Previous post was at 08:12 AM ----------
Crazyhat said:
I'll tell you exactly the same as the last one...
First of all... YOU can NEVER try to install an official update having a custom recovery (like TWRP) installed in your device. Previously, you should have changed to stock recovery.
Having said that, you have to make the following....
1. If you have already the full room into internal memory, reboot into recovery. If not, copy the full rom to a pendrive an connect it by OTG.
2. Restart in recovery mode and click on wipe and then, advance wipe and select... davilk, cache, data and system partitions. then, slide the bar.
3. When it finish, go back to the main menu and click on install. Select the full rom from internal storage (or OTG) and install it.
4. When it finishs, you have two options from here...
4.1. First option. Try to install TWRP recovery before rebooting, because the rom will have installed stock recovery. After flashing twrp, theoretically you should get twrp installed but sometimes it fails. So, It is possible it is blocked when you try to reboot system and you can see a warming saying "there is not rom installed". Don't panic, turn off your phone from power bottom and restart the device. You will see the room installed but not the twrp. In this case, you will have to install TWRP from sideload and then, Supersu from recovery.
4.2. Second option. When the rom instalation has a finished, reboot system to check the rom is installed correctly. Then, restart again your device to fastboot mode and install recovery twrp from sideload. Finally, you can install Supersu from recovery.
This is all! Never settle!
Click to expand...
Click to collapse
Here is the problem tho, I can flash Roms but when I attempte to boot into said ROM it just goes straight back to recovery.
---------- Post added at 08:16 AM ---------- Previous post was at 08:15 AM ----------
Puddi_Puddin said:
Flash stock recovery? Does it boot?
Click to expand...
Click to collapse
Tried that too through adb but didn't work for some reason, I forget. Either I messed up or the phone didn't allow it
urvianoob said:
I have the exact same problem and in stuck in a pickle
---------- Post added at 08:15 AM ---------- Previous post was at 08:12 AM ----------
Here is the problem tho, I can flash Roms but when I attempte to boot into said ROM it just goes straight back to recovery.
---------- Post added at 08:16 AM ---------- Previous post was at 08:15 AM ----------
Tried that too through adb but didn't work for some reason, I forget. Either I messed up or the phone didn't allow it
Click to expand...
Click to collapse
You don't do that with adb but with Fastboot
Boot into fastboot > fastboot flash recovery-file name.img
Here's what I had to do: flash the new stock recovery in fastboot rather than twrp at all, then boot to it FROM fastboot. Sideload the full firmware (4.0.0, 4.0.1 either should work) and reboot/power off. My phone seemingly bricked at this stage but playing around with the buttons got me back into stock recovery where I got the option to decrypt and wipe. After this it booted up unto a fresh install of 4.0.1.
Hi
Puddi_Puddin said:
You don't do that with adb but with Fastboot
Boot into fastboot > fastboot flash recovery-file name.img
Click to expand...
Click to collapse
Yeah that is what I meant to say lol, I found something in another article on the same problem that worked for a guy, gonna try it soon
---------- Post added at 08:31 AM ---------- Previous post was at 08:22 AM ----------
Shayded said:
Here's what I had to do: flash the new stock recovery in fastboot rather than twrp at all, then boot to it FROM fastboot. Sideload the full firmware (4.0.0, 4.0.1 either should work) and reboot/power off. My phone seemingly bricked at this stage but playing around with the buttons got me back into stock recovery where I got the option to decrypt and wipe. After this it booted up unto a fresh install of 4.0.1.
Click to expand...
Click to collapse
OK I get all of it so basically I flash stock recovery from fast boot, boot into the new stock recovery via fast boot, then flash ROM and I'm done?
OTA works ONLY if you are on stock recovery, rom, kernel.
I suggest to format data in recovery (this will wipe ALL in youre phone),
flash modified recovery (.22, .23. 28 by eng.stk),
flash FULL rom,
flash SuperSU 2.79 stable, if you want root,
flash recovery,
reboot to recovery,
reboot to rom.
Shayded said:
Here's what I had to do: flash the new stock recovery in fastboot rather than twrp at all, then boot to it FROM fastboot. Sideload the full firmware (4.0.0, 4.0.1 either should work) and reboot/power off. My phone seemingly bricked at this stage but playing around with the buttons got me back into stock recovery where I got the option to decrypt and wipe. After this it booted up unto a fresh install of 4.0.1.
Click to expand...
Click to collapse
Where can I get the stock recovery download?
something like that happen to me when i try to go back from N to MM oxygen, i managed to fixed it by installing the stock recovery then install the 3.26 plus the 3.26 "modem" (if i didnt install this one, my touch screen wouldnt work) after that it just works, then i updated to 3.28
i havent install twrp and do the root for now because dont have time to tinker yet, but i can just do than whenever i have the time
I think ---- and my solution
I think some script is created as we click update...It's running on boot up and causing this problem...
I had this problem yesterday and it took me a lot of time to get my device to working...
SOLUTION: first backup the data(it backsup apps and such) from twrp and other files which are important for you...copy it to a PC.
follow the second step in this thread(it will wipe everything)
It's not allowing me to post link...It's the mega unbrick guide from Oneplus3 forums
It will take you to older version and then flash full zip(nougat build) from modded twrp..restore the backup..don't update until someone finds a solution...I did that and I'm waiting for a solution to continue...
hope it helps
This is how I solved mine.
1) Go back to stock recovery v2
2) adb sideload oos, flash magisk then flash systemless supersu.
Try this guys, found a way how to flash 36mb OTA file with latest modified TWRP by eng.stk here https://forum.xda-developers.com/devdb/project/dl/?id=22429
1. Download and dirty flash the full 4.0 zip https://drive.google.com/file/d/0BzS3nWITUqU_Sk5yQkRqWkhFY3c/view
2. Flash 4.0.1 OTA (36mb) https://drive.google.com/file/d/0B6FY-XKZtgn4R2d2Rk8xd3AzWVE/view?usp=drivesdk
3. Flash SuperSU
4. Reboot
Sent from my ONEPLUS A3000 using XDA-Developers Legacy app
eko_cahyono said:
Try this guys, found a way how to flash 36mb OTA file with latest modified TWRP by eng.stk here https://forum.xda-developers.com/devdb/project/dl/?id=22429
1. Download and dirty flash the full 4.0 zip https://drive.google.com/file/d/0BzS3nWITUqU_Sk5yQkRqWkhFY3c/view
2. Flash 4.0.1 OTA (36mb) https://drive.google.com/file/d/0B6FY-XKZtgn4R2d2Rk8xd3AzWVE/view?usp=drivesdk
3. Flash SuperSU
4. Reboot
Sent from my ONEPLUS A3000 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Did it work for you? For me it keeps booting back to TWRP
---------- Post added at 03:45 AM ---------- Previous post was at 03:17 AM ----------
Shayded said:
Here's what I had to do: flash the new stock recovery in fastboot rather than twrp at all, then boot to it FROM fastboot. Sideload the full firmware (4.0.0, 4.0.1 either should work) and reboot/power off. My phone seemingly bricked at this stage but playing around with the buttons got me back into stock recovery where I got the option to decrypt and wipe. After this it booted up unto a fresh install of 4.0.1.
Click to expand...
Click to collapse
Where did you get new stock recovery? link please
paul369741 said:
Did it work for you? For me it keeps booting back to TWRP
---------- Post added at 03:45 AM ---------- Previous post was at 03:17 AM ----------
Where did you get new stock recovery? link please
Click to expand...
Click to collapse
Yes It works
You can grab the stock recovery in the OP3 toolkit here on xda
https://forum.xda-developers.com/oneplus-3/development/toolkit-oneplus-3-toolkit-unlock-t3398799
Flash through fastboot, then flash/sideload a full stock zip. After that your phone should be back in working order and you can flash TWRP back.
Goodluck!
qyrus said:
You can grab the stock recovery in the OP3 toolkit here on xda
https://forum.xda-developers.com/oneplus-3/development/toolkit-oneplus-3-toolkit-unlock-t3398799
Flash through fastboot, then flash/sideload a full stock zip. After that your phone should be back in working order and you can flash TWRP back.
Goodluck!
Click to expand...
Click to collapse
If my phone is rooted, flashing through fastboot the stock recovery will remove root?
my flashing history:
i was on audax (oos based nougat rom) with blu spark kernel before, then went to official ob1, then back to audax, then back to stock oos nougat and now i flashed audax and after clean flashing it, it just wont boot up.
when i try to boot up i see the 1+ logo but then it reboots to recovery. i also tried flashing stock nougat again and also flashed stock kernel manually but it also doesnt work.
i always do:
1. wipe system/dalvic/cache/data
2. install ROM
3. wipe dalvik/cache
4. flash magisk (also tried without flashing magisk)
5. reboot
i've been looking on the interwebs all day but nothing worked.. help pls :/
EDIT: problem was blu spark twrp. Maybe installing Oreo ****ed it up. I flashed codeworkx newest twrp universal build and now Im able to boot again!! Btw: I also found that magisk 15.0 prohibits a proper boot up and results in a boot loop. version 15.2, however, does the trick!
when it auto reboot to recovery, formate data
When s**t happens, it is wise to start everything from scratch:
-boot in fastboot mode and flash stock recovery with "fastboot flash recovery recovery.img" (rename recovery.img with your recovery filename), then reboot recovery and select english, advanced, adb sideload;
-flash stock OS with "adb sideload rom.zip" (rename rom.zip with your Oxygen OS filename).
Procedure will require some minute because of the large file size. Remember to save all your data on internal storage first!
I advice you to flash original recovery because often sideloading in TWRP leads to some error.
Your phone will boot again... after that you may reflash TWRP, Magisk etc
I had the same issue. Bootloop and jumb into recovery by itself. You have to flash magisk 15.2 via recovery and will be boot.
redatak said:
I had the same issue. Bootloop and jumb into recovery by itself. You have to flash magisk 15.2 via recovery and will be boot.
Click to expand...
Click to collapse
He says that it occurs even without Magisk... I had a similar trouble once, and the only way to solve it was the procedure I wrote above...
I dont know if you can boot it w/o root
redatak said:
I dont know if you can boot it w/o root
Click to expand...
Click to collapse
Why not? Stock OS is not rooted.
jonsat said:
Why not? Stock OS is not rooted.
Click to expand...
Click to collapse
He said audrax not stock oos
SOLVED! TWRP was the only variable left that I didn't think of. See initial post for solution. thx for help!