Verizon G925V works very well with T-mobile network. I found Verizon basically unlock all 4G phones. Even T-mobile has a brief guide to network setup for other carrier phones. Anyway, I'm wonder if I can update T-Mobile firmware on to Verizon S6 edge plus. Thanks in advance.
Related
Hi Guys,
Can anyone confirm if the T mobile version of the s6 Edge is factory unlocked , like how the T mobile iPhones are ?
Thanks
RedCell X
redcellx said:
Hi Guys,
Can anyone confirm if the T mobile version of the s6 Edge is factory unlocked , like how the T mobile iPhones are ?
Thanks
RedCell X
Click to expand...
Click to collapse
T-Mobile iPhones are not unlocked if purchased directly from T-Mobile. If you purchase iPhone from Apple in the T-Mobile variation (which is the same model as the Verizon version), it will be unlocked.
So I'm like 99% certain the S6 does not come unlocked from T-Mobile, like all other T-Mobile phones.
yyhd said:
T-Mobile iPhones are not unlocked if purchased directly from T-Mobile. If you purchase iPhone from Apple in the T-Mobile variation (which is the same model as the Verizon version), it will be unlocked.
So I'm like 99% certain the S6 does not come unlocked from T-Mobile, like all other T-Mobile phones.
Click to expand...
Click to collapse
lte data will work on verizon's network but cdma voice will get rejected on verizons network
No, absolutely not unlocked. Actually a bunch of threads on the subject already... the phone is currently unlockable unless you are a LONG standing t-mobile customer
Title says it all... I was wondering if its possible to get it to work
Unfortunately, no, it will not. AT&T is a GSM based carrier and Sprint is a CDMA carrier. The two technologies are not compatiable at all.
Source: Recently asked the people at the AT&T store this very question.
Yes AT&T will work up to HSDPA on the sprint galaxy s6 as only the LTE bands are different, do a search for unlocking sprint Galaxy S6 by I one or give me a DM.
Yes it does work if its unlocked domestically
Hi guys!
So I have been stuck with my AT&T S5 since it first came out in 2014. Now it's wearing off..... (very slow, crashes a lot). I am a root/flash junkie so the only reason why I want to upgrade to s6 edge now is because it's possible to root! I am planning to upgrade to a S6 edge but using a Tmobile device and unlocking the sims to AT&T carrier (I am using AT&T). I have done my research and the S6 edge for AT&T is too difficult to root/rom customize with 5.1.1 (or not possible at all). With that being said, I am planning to purchase a s6 edge running on 5.1.1 with T-mobile.
Anyone with AT&T service have tried this method and works successfully? Few questions to ask.. how is it any differ from AT&T service? Does it matter? Any changes? Text/call/4G LTE works flawlessly just like a normal AT&T phone?
I'm also planning to unlock the sims by the method that senior member, stifilz, posted in one of the other thread, "Sim Unlock - Intl' and Domestic".
Once it is unlocked, you put an AT&T SIM in and you are good to go. Did it on my T-Mo Nexus 5 and on my wife's T-Mo iPhone 5S.
-Mike
I know they are two diffrent networks with CDMA & GSM. Some phones now cover both. I've read the note 4 was working like this. I'm curious of a couple things.
1. Is it really possible? To go from at&t to verizon with a note wdge.
2. If so, could you flash a verizon rom onto the at&t note edge to have all the verizon stuff?
Well I haven't been looking into this
But from first-hand experience, if you do
Only talk and text messages will work
Anything data-based will not work as the AT&T Note Edge does not have the correct radios to actually get data
You need the CDMA radios to actually use data
and secondly, the AT&T Note Edge (Same with the Note 4) has been bootloader locked since the release of the phone
Meaning the AT&T Note Edge cannot be modified system-wise
We are still trying to get stable temp-root
Not a good sight
And the Verizon Note 4 (Edge as well) have been bootloader unlocked since April of last year
Meaning customization level is higher than the AT&T variant
Now thing is, the Verizon variant is bootloader locked by default
and you need to have a good amount of knowledge of ADB to actually unlock it
and a lot of patience
but the community is there to help you out with any of your questions
As long as the phone has the Samsung eMMC
So why bother with the AT&T variant and just go get the Verizon variant
Bootloader unlocked, and correct radios
Seems like a plus to me
and the Verizon variant has GSM radios so it can work with AT&T and T-Mobile, and yes
It is unlocked by default so you don't need to contact Verizon to unlock the phone
Verizon Note Edge on TMOBILE
What will I need to do in order for my Samsung Verizon Note Edge to receive Data LTE and MMS fully on the Tmobile Network......?
akosibushman777 said:
What will I need to do in order for my Samsung Verizon Note Edge to receive Data LTE and MMS fully on the Tmobile Network......?
Click to expand...
Click to collapse
All you need is to first of all
Find the APN settings for your specific carrier
After you do, place the SIM card in and then go to the settings, Mobile Networks, APN settings, and then set it up how it is intended to be
I have searched for hours without any luck. I have been with an AT&T MVNO (Unreal mobile) for two years. During the 3g shutdown I was unable to use VOLTE on my S8 (VERIZON FIRMWARE). I found out the only way to use my S8 on UNREAL was to have AT&T firmware. I spent countless hours trying to flash ATT firware onto the Verizon S8, but I was unable to do it by flashing, but I found another way. I put a TMOBILE SIM in my S8 and it automatically loaded the TMOBILE firmware. Once the S8 was booted up I was able to run a USSD code (*#272*IMEI#) through the dialer which allowed me to switch to ATT firmware! Problem solved!!!! But a few months later my S8 was lost and I got a S9 (Verizon Firmware). I tried the same method as I used on the S8, but it doesn't work. When I put a T-mobile sim in the S9 it does not automatically change the firmware like the S8 did. From the Verizon dialer on both the S8 and the S9 it will NOT ALLOW USSD codes. Does anyone know if there is a way to run the USSD code (*#272*IMEI#) on the Verizon S9? Does anyone know why the Verizon S9 doesn't automatically change to T-Mobile after inserting a T-Mobile sim? Are there any other sims I can insert in the S9 to change the Verizon firmware in order to run USSD codes? Flashing my S9 is not an option for me because I must be too stupid. Anyhow thanks for your help!!!!
Seem's you+I have similar problem! I have s9 verizon unlocked,but I am with consumer cellular. They went to 4g recently now no call or recieve call! They gave me new sim, still not working! Told me shorter mobile wavelength from tower's! Last update on this phone was 2018? Won't update normal procedure! Wondering since this is U.S.A version if any way to update to 4 g? I'm fine on micro-soldering but when it come's to tech,a little to old I guess!!Lol Any help appreciated!
bluegate1648 said:
I have searched for hours without any luck. I have been with an AT&T MVNO (Unreal mobile) for two years. During the 3g shutdown I was unable to use VOLTE on my S8 (VERIZON FIRMWARE). I found out the only way to use my S8 on UNREAL was to have AT&T firmware. I spent countless hours trying to flash ATT firware onto the Verizon S8, but I was unable to do it by flashing, but I found another way. I put a TMOBILE SIM in my S8 and it automatically loaded the TMOBILE firmware. Once the S8 was booted up I was able to run a USSD code (*#272*IMEI#) through the dialer which allowed me to switch to ATT firmware! Problem solved!!!! But a few months later my S8 was lost and I got a S9 (Verizon Firmware). I tried the same method as I used on the S8, but it doesn't work. When I put a T-mobile sim in the S9 it does not automatically change the firmware like the S8 did. From the Verizon dialer on both the S8 and the S9 it will NOT ALLOW USSD codes. Does anyone know if there is a way to run the USSD code (*#272*IMEI#) on the Verizon S9? Does anyone know why the Verizon S9 doesn't automatically change to T-Mobile after inserting a T-Mobile sim? Are there any other sims I can insert in the S9 to change the Verizon firmware in order to run USSD codes? Flashing my S9 is not an option for me because I must be too stupid. Anyhow thanks for your help!!!!
Click to expand...
Click to collapse
In my case I had a Verizon unlocked s9 and it turns out Verizon has bloatware that prevents many MVNO's from using VolTE. After tons of research the only solution I found was using patched ODIN to flash unbranded stock firmware in order to chance my model from a U model to a a U1 model. Now the phone works perfectly. Someone should file a lawsuit against Verizon (and ATT) for circumventing federal law on unlocked phones (technically they are unlocked but you can't use them because of their bloatware). It really is a major scam.
bluegate1648 said:
In my case I had a Verizon unlocked s9 and it turns out Verizon has bloatware that prevents many MVNO's from using VolTE. After tons of research the only solution I found was using patched ODIN to flash unbranded stock firmware in order to chance my model from a U model to a a U1 model. Now the phone works perfectly. Someone should file a lawsuit against Verizon (and ATT) for circumventing federal law on unlocked phones (technically they are unlocked but you can't use them because of their bloatware). It really is a major scam.
Click to expand...
Click to collapse
Is there a trhread or anyplace that will show me the step's to achieve this! Also does this remove the Verizon bloatware ect? Thank's!